diff options
author | Marcelo Schmitt <marcelo.schmitt@analog.com> | 2023-12-16 20:46:37 +0300 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2023-12-17 17:54:39 +0300 |
commit | 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 (patch) | |
tree | 80dce36bd354640b4d3d33fc2a216f6ee6b3503f | |
parent | a25a7df518fc71b1ba981d691e9322e645d2689c (diff) | |
download | linux-149694f5e79b0c7a36ceb76e7c0d590db8f151c1.tar.xz |
iio: adc: ad7091r: Set alert bit in config register
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-rw-r--r-- | drivers/iio/adc/ad7091r-base.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c index 0e5d3d2e9c98..8aaa854f816f 100644 --- a/drivers/iio/adc/ad7091r-base.c +++ b/drivers/iio/adc/ad7091r-base.c @@ -28,6 +28,7 @@ #define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff) /* AD7091R_REG_CONF */ +#define AD7091R_REG_CONF_ALERT_EN BIT(4) #define AD7091R_REG_CONF_AUTO BIT(8) #define AD7091R_REG_CONF_CMD BIT(10) @@ -232,6 +233,11 @@ int ad7091r_probe(struct device *dev, const char *name, iio_dev->channels = chip_info->channels; if (irq) { + ret = regmap_update_bits(st->map, AD7091R_REG_CONF, + AD7091R_REG_CONF_ALERT_EN, BIT(4)); + if (ret) + return ret; + ret = devm_request_threaded_irq(dev, irq, NULL, ad7091r_event_handler, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, iio_dev); |