summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-04-23 12:06:48 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-04-23 12:06:48 +0300
commit4e1d96306d8b8790bc157afa233dc2a2be86ccf5 (patch)
treeb40d171eb9d7b28161b3434e7525727165d51c1d
parent710c451fbcb24959c575a96dff28bcf48c819fe2 (diff)
parent2de8c02349f02d014e51b43f306d28fc7a23ea6e (diff)
downloadlinux-4e1d96306d8b8790bc157afa233dc2a2be86ccf5.tar.xz
Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-proximity10
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-sx931010
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml65
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml62
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml63
-rw-r--r--Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt37
-rw-r--r--Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml80
-rw-r--r--Documentation/devicetree/bindings/iio/common.yaml35
-rw-r--r--Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt63
-rw-r--r--Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml110
-rw-r--r--Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/light/tsl2563.txt19
-rw-r--r--Documentation/devicetree/bindings/iio/light/vcnl4000.txt24
-rw-r--r--Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml50
-rw-r--r--Documentation/devicetree/bindings/iio/st-sensors.txt1
-rw-r--r--Documentation/driver-api/driver-model/devres.rst8
-rw-r--r--Documentation/driver-api/iio/triggers.rst2
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/iio/accel/Kconfig2
-rw-r--r--drivers/iio/accel/kxsd9-i2c.c4
-rw-r--r--drivers/iio/accel/mxc4005.c4
-rw-r--r--drivers/iio/accel/st_accel.h2
-rw-r--r--drivers/iio/accel/st_accel_buffer.c3
-rw-r--r--drivers/iio/accel/st_accel_core.c83
-rw-r--r--drivers/iio/accel/st_accel_i2c.c5
-rw-r--r--drivers/iio/adc/Kconfig45
-rw-r--r--drivers/iio/adc/Makefile3
-rw-r--r--drivers/iio/adc/ad7476.c59
-rw-r--r--drivers/iio/adc/ad7780.c27
-rw-r--r--drivers/iio/adc/ad7791.c64
-rw-r--r--drivers/iio/adc/ad7793.c144
-rw-r--r--drivers/iio/adc/ad9467.c422
-rw-r--r--drivers/iio/adc/adi-axi-adc.c482
-rw-r--r--drivers/iio/adc/at91_adc.c5
-rw-r--r--drivers/iio/adc/fsl-imx25-gcq.c4
-rw-r--r--drivers/iio/adc/intel_mrfld_adc.c6
-rw-r--r--drivers/iio/adc/max1241.c227
-rw-r--r--drivers/iio/adc/max1363.c32
-rw-r--r--drivers/iio/adc/sun4i-gpadc-iio.c4
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c4
-rw-r--r--drivers/iio/adc/xilinx-xadc-events.c2
-rw-r--r--drivers/iio/adc/xilinx-xadc.h2
-rw-r--r--drivers/iio/buffer/industrialio-buffer-dma.c1
-rw-r--r--drivers/iio/buffer/industrialio-buffer-dmaengine.c41
-rw-r--r--drivers/iio/buffer/industrialio-hw-consumer.c31
-rw-r--r--drivers/iio/buffer/industrialio-triggered-buffer.c11
-rw-r--r--drivers/iio/buffer/kfifo_buf.c22
-rw-r--r--drivers/iio/chemical/atlas-sensor.c7
-rw-r--r--drivers/iio/chemical/bme680_core.c36
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_i2c.c4
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_spi.c6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c13
-rw-r--r--drivers/iio/gyro/Kconfig2
-rw-r--r--drivers/iio/gyro/bmg160_i2c.c6
-rw-r--r--drivers/iio/gyro/bmg160_spi.c5
-rw-r--r--drivers/iio/gyro/mpu3050-i2c.c4
-rw-r--r--drivers/iio/gyro/st_gyro_buffer.c3
-rw-r--r--drivers/iio/gyro/st_gyro_core.c9
-rw-r--r--drivers/iio/health/max30100.c7
-rw-r--r--drivers/iio/humidity/hts221_buffer.c6
-rw-r--r--drivers/iio/humidity/hts221_i2c.c6
-rw-r--r--drivers/iio/humidity/hts221_spi.c6
-rw-r--r--drivers/iio/imu/adis.c2
-rw-r--r--drivers/iio/imu/adis16400.c19
-rw-r--r--drivers/iio/imu/adis16460.c27
-rw-r--r--drivers/iio/imu/bmi160/bmi160_i2c.c4
-rw-r--r--drivers/iio/imu/bmi160/bmi160_spi.c4
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c8
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c23
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c4
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c4
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h2
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c96
-rw-r--r--drivers/iio/industrialio-buffer.c18
-rw-r--r--drivers/iio/industrialio-core.c88
-rw-r--r--drivers/iio/industrialio-trigger.c53
-rw-r--r--drivers/iio/inkern.c27
-rw-r--r--drivers/iio/light/isl29125.c28
-rw-r--r--drivers/iio/light/ltr501.c2
-rw-r--r--drivers/iio/light/st_uvis25_i2c.c4
-rw-r--r--drivers/iio/light/st_uvis25_spi.c4
-rw-r--r--drivers/iio/light/tsl2563.c2
-rw-r--r--drivers/iio/light/tsl2772.c6
-rw-r--r--drivers/iio/light/vcnl4000.c25
-rw-r--r--drivers/iio/magnetometer/ak8974.c7
-rw-r--r--drivers/iio/magnetometer/bmc150_magn_spi.c4
-rw-r--r--drivers/iio/magnetometer/mmc35240.c4
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c3
-rw-r--r--drivers/iio/pressure/bmp280-core.c98
-rw-r--r--drivers/iio/pressure/st_pressure_core.c7
-rw-r--r--drivers/iio/proximity/Kconfig13
-rw-r--r--drivers/iio/proximity/Makefile1
-rw-r--r--drivers/iio/proximity/sx9310.c1069
-rw-r--r--drivers/iio/temperature/ltc2983.c4
-rw-r--r--drivers/iio/trigger/iio-trig-hrtimer.c2
-rw-r--r--drivers/staging/iio/Documentation/overview.txt2
-rw-r--r--include/linux/fpga/adi-axi-common.h6
-rw-r--r--include/linux/iio/adc/ad_sigma_delta.h58
-rw-r--r--include/linux/iio/adc/adi-axi-adc.h64
-rw-r--r--include/linux/iio/buffer-dma.h2
-rw-r--r--include/linux/iio/buffer-dmaengine.h3
-rw-r--r--include/linux/iio/buffer_impl.h9
-rw-r--r--include/linux/iio/consumer.h18
-rw-r--r--include/linux/iio/hw-consumer.h1
-rw-r--r--include/linux/iio/iio.h10
-rw-r--r--include/linux/iio/kfifo_buf.h1
-rw-r--r--include/linux/iio/trigger.h3
-rw-r--r--include/linux/iio/triggered_buffer.h2
110 files changed, 3625 insertions, 774 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity
new file mode 100644
index 000000000000..2172f3bb9c64
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity
@@ -0,0 +1,10 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel
+Date: March 2020
+KernelVersion: 5.7
+Contact: linux-iio@vger.kernel.org
+Description:
+ Near level for proximity sensors. This is a single integer
+ value that tells user space when an object should be
+ considered close to the device. If the value read from the
+ sensor is above or equal to the value in this file an object
+ should typically be considered near.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
new file mode 100644
index 000000000000..3ac7759013e5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
@@ -0,0 +1,10 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw
+Date: February 2019
+KernelVersion: 5.6
+Contact: Daniel Campello <campello@chromium.org>
+Description:
+ Proximity measurement indicating that some object is
+ near the combined sensor. The combined sensor presents
+ proximity measurements constructed by hardware by
+ combining measurements taken from a given set of
+ physical sensors.
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 000000000000..c4f57fa6aad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 High-Speed ADC
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital
+ converter (ADC).
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad9467
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: adc-clk
+
+ powerdown-gpios:
+ description:
+ Pin that controls the powerdown mode of the device.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Reset pin for the device.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad9467";
+ reg = <0>;
+ clocks = <&adc_clk>;
+ clock-names = "adc-clk";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 000000000000..0924b2b4972b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+ - Michael Hennerich <michael.hennerich@analog.com>
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+ with a high speed serial (JESD204B/C) or source synchronous parallel
+ interface (LVDS/CMOS).
+ Usually, some other interface type (i.e SPI) is used as a control
+ interface for the actual ADC, while this IP core will interface
+ to the data-lines of the ADC and handle the streaming of data into
+ memory via DMA.
+
+ https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+ compatible:
+ enum:
+ - adi,axi-adc-10.0.a
+
+ reg:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: rx
+
+ adi,adc-dev:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+ - compatible
+ - dmas
+ - reg
+ - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+ - |
+ axi-adc@44a00000 {
+ compatible = "adi,axi-adc-10.0.a";
+ reg = <0x44a00000 0x10000>;
+ dmas = <&rx_dma 0>;
+ dma-names = "rx";
+
+ adi,adc-dev = <&spi_adc>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 000000000000..f562505f5ecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+ - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+ Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+ can be found at:
+ https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max1241
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description:
+ Device tree identifier of the regulator that powers the ADC.
+
+ vref-supply:
+ description:
+ Device tree identifier of the regulator that provides the external
+ reference voltage.
+
+ shutdown-gpios:
+ description:
+ GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+ specified, the /SHDN pin will be asserted between conversions,
+ thus enabling power-down mode.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vref-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "maxim,max1241";
+ reg = <0>;
+ vdd-supply = <&adc_vdd>;
+ vref-supply = <&adc_vref>;
+ spi-max-frequency = <1000000>;
+ shutdown-gpios = <&gpio 26 1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
deleted file mode 100644
index c2c50b59873d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Rockchip Successive Approximation Register (SAR) A/D Converter bindings
-
-Required properties:
-- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc"
- - "rockchip,saradc": for rk3188, rk3288
- - "rockchip,rk3066-tsadc": for rk3036
- - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328
- - "rockchip,rk3399-saradc": for rk3399
- - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
- the peripheral clock.
-- vref-supply: The regulator supply ADC reference voltage.
-- #io-channel-cells: Should be 1, see ../iio-bindings.txt
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names if need support
- this option. See ../reset/reset.txt for details.
-- reset-names: Must include the name "saradc-apb".
-
-Example:
- saradc: saradc@2006c000 {
- compatible = "rockchip,saradc";
- reg = <0x2006c000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
- clock-names = "saradc", "apb_pclk";
- resets = <&cru SRST_SARADC>;
- reset-names = "saradc-apb";
- #io-channel-cells = <1>;
- vref-supply = <&vcc18>;
- };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
new file mode 100644
index 000000000000..bcff82a423bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,saradc
+ - const: rockchip,rk3066-tsadc
+ - const: rockchip,rk3399-saradc
+ - items:
+ - enum:
+ - rockchip,px30-saradc
+ - rockchip,rk3308-saradc
+ - rockchip,rk3328-saradc
+ - rockchip,rv1108-saradc
+ - const: rockchip,rk3399-saradc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: converter clock
+ - description: peripheral clock
+
+ clock-names:
+ items:
+ - const: saradc
+ - const: apb_pclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: saradc-apb
+
+ vref-supply:
+ description:
+ The regulator supply for the ADC reference voltage.
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - vref-supply
+ - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ saradc: saradc@2006c000 {
+ compatible = "rockchip,saradc";
+ reg = <0x2006c000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC>;
+ reset-names = "saradc-apb";
+ vref-supply = <&vcc18>;
+ #io-channel-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
new file mode 100644
index 000000000000..97ffcb77043d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/common.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+ - Guido Günther <agx@sigxcpu.org>
+
+description: |
+ This document defines device tree properties common to several iio
+ sensors. It doesn't constitue a device tree binding specification by itself but
+ is meant to be referenced by device tree bindings.
+
+ When referenced from sensor tree bindings the properties defined in this
+ document are defined as follows. The sensor tree bindings are responsible for
+ defining whether each property is required or optional.
+
+properties:
+ proximity-near-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ For proximity sensors whether an object can be considered near to the
+ device depends on parameters like sensor position, covering glass and
+ aperture. This value gives an indication to userspace for which
+ sensor readings this is the case.
+
+ Raw proximity values equal or above this level should be
+ considered 'near' to the device (an object is near to the
+ sensor).
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
deleted file mode 100644
index bf2925c671c6..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-STMicroelectronics STM32 DAC
-
-The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
-may be configured in 8 or 12-bit mode. It has two output channels, each with
-its own converter.
-It has built-in noise and triangle waveform generator and supports external
-triggers for conversions. The DAC's output buffer allows a high drive output
-current.
-
-Contents of a stm32 dac root node:
------------------------------------
-Required properties:
-- compatible: Should be one of:
- "st,stm32f4-dac-core"
- "st,stm32h7-dac-core"
-- reg: Offset and length of the device's register set.
-- clocks: Must contain an entry for pclk (which feeds the peripheral bus
- interface)
-- clock-names: Must be "pclk".
-- vref-supply: Phandle to the vref+ input analog reference supply.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" for each DAC channel may be defined to set
- DAC_OUTx pin in mode of operation for analog output on external pin.
-
-Contents of a stm32 dac child node:
------------------------------------
-DAC core node should contain at least one subnode, representing a
-DAC instance/channel available on the machine.
-
-Required properties:
-- compatible: Must be "st,stm32-dac".
-- reg: Must be either 1 or 2, to define (single) channel in use
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
- Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-Example:
- dac: dac@40007400 {
- compatible = "st,stm32h7-dac-core";
- reg = <0x40007400 0x400>;
- clocks = <&clk>;
- clock-names = "pclk";
- vref-supply = <&reg_vref>;
- pinctrl-names = "default";
- pinctrl-0 = <&dac_out1 &dac_out2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dac1: dac@1 {
- compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
- reg = <1>;
- };
-
- dac2: dac@2 {
- compatible = "st,stm32-dac";
- #io-channels-cells = <1>;
- reg = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 000000000000..393f7005941a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 DAC bindings
+
+description: |
+ The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+ may be configured in 8 or 12-bit mode. It has two output channels, each with
+ its own converter.
+ It has built-in noise and triangle waveform generator and supports external
+ triggers for conversions. The DAC's output buffer allows a high drive output
+ current.
+
+maintainers:
+ - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-dac-core
+ - st,stm32h7-dac-core
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pclk
+
+ vref-supply:
+ description: Phandle to the vref input analog reference voltage.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - vref-supply
+ - '#address-cells'
+ - '#size-cells'
+
+patternProperties:
+ "^dac@[1-2]+$":
+ type: object
+ description:
+ A DAC block node should contain at least one subnode, representing an
+ DAC instance/channel available on the machine.
+
+ properties:
+ compatible:
+ const: st,stm32-dac
+
+ reg:
+ description: Must be either 1 or 2, to define (single) channel in use
+ enum: [1, 2]
+
+ '#io-channel-cells':
+ const: 1
+
+ additionalProperties: false
+
+ required:
+ - compatible
+ - reg
+ - '#io-channel-cells'
+
+examples:
+ - |
+ // Example on stm32mp157c
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ dac: dac@40017000 {
+ compatible = "st,stm32h7-dac-core";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ vref-supply = <&vref>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac@1 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <1>;
+ };
+
+ dac@2 {
+ compatible = "st,stm32-dac";
+ #io-channel-cells = <1>;
+ reg = <2>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
index 78e18a1e9c1d..bb43d1ad9c9f 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
@@ -2,7 +2,7 @@
Required properties:
- - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+ - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro"
- reg : the I2C address of the sensor (0x69)
Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
new file mode 100644
index 000000000000..efd2eba5f23c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Ambient light sensor with an i2c interface.
+
+properties:
+ compatible:
+ enum:
+ - amstaos,tsl2560
+ - amstaos,tsl2561
+ - amstaos,tsl2562
+ - amstaos,tsl2563
+
+ reg:
+ maxItems: 1
+
+ amstaos,cover-comp-gain:
+ description: Multiplier for gain compensation
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [1, 16]
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@29 {
+ compatible = "amstaos,tsl2563";
+ reg = <0x29>;
+ amstaos,cover-comp-gain = <16>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt
deleted file mode 100644
index f91e809e736e..000000000000
--- a/Documentation/devicetree/bindings/iio/light/tsl2563.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* AMS TAOS TSL2563 ambient light sensor
-
-Required properties:
-
- - compatible : should be "amstaos,tsl2563"
- - reg : the I2C address of the sensor
-
-Optional properties:
-
- - amstaos,cover-comp-gain : integer used as multiplier for gain
- compensation (default = 1)
-
-Example:
-
-tsl2563@29 {
- compatible = "amstaos,tsl2563";
- reg = <0x29>;
- amstaos,cover-comp-gain = <16>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt b/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
deleted file mode 100644
index 955af4555c90..000000000000
--- a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VISHAY VCNL4000 - Ambient Light and proximity sensor
-
-This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
-
-Required properties:
-
- -compatible: must be one of :
- vishay,vcnl4000
- vishay,vcnl4010
- vishay,vcnl4020
- vishay,vcnl4040
- vishay,vcnl4200
-
- -reg: I2C address of the sensor, should be one from below based on the model:
- 0x13
- 0x51
- 0x60
-
-Example:
-
-light-sensor@51 {
- compatible = "vishay,vcnl4200";
- reg = <0x51>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
new file mode 100644
index 000000000000..da8f2e872535
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+ - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+ Ambient light sensing with proximity detection over an i2c
+ interface.
+
+allOf:
+ - $ref: ../common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - vishay,vcnl4000
+ - vishay,vcnl4010
+ - vishay,vcnl4020
+ - vishay,vcnl4040
+ - vishay,vcnl4200
+ reg:
+ maxItems: 1
+
+ proximity-near-level: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+- |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@51 {
+ compatible = "vishay,vcnl4200";
+ reg = <0x51>;
+ proximity-near-level = <220>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 0ef64a444479..3213599c5071 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -50,6 +50,7 @@ Accelerometers:
- st,lis3dhh
- st,lis3de
- st,lis2de12
+- st,lis2hh12
Gyroscopes:
- st,l3g4200d-gyro
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index 46c13780994c..91b0b8e5556c 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -284,21 +284,13 @@ I2C
IIO
devm_iio_device_alloc()
- devm_iio_device_free()
devm_iio_device_register()
- devm_iio_device_unregister()
devm_iio_kfifo_allocate()
- devm_iio_kfifo_free()
devm_iio_triggered_buffer_setup()
- devm_iio_triggered_buffer_cleanup()
devm_iio_trigger_alloc()
- devm_iio_trigger_free()
devm_iio_trigger_register()
- devm_iio_trigger_unregister()
devm_iio_channel_get()
- devm_iio_channel_release()
devm_iio_channel_get_all()
- devm_iio_channel_release_all()
INPUT
devm_input_allocate_device()
diff --git a/Documentation/driver-api/iio/triggers.rst b/Documentation/driver-api/iio/triggers.rst
index 5c2156de6284..dfd7ba3eabde 100644
--- a/Documentation/driver-api/iio/triggers.rst
+++ b/Documentation/driver-api/iio/triggers.rst
@@ -4,9 +4,7 @@ Triggers
* struct :c:type:`iio_trigger` — industrial I/O trigger device
* :c:func:`devm_iio_trigger_alloc` — Resource-managed iio_trigger_alloc
-* :c:func:`devm_iio_trigger_free` — Resource-managed iio_trigger_free
* :c:func:`devm_iio_trigger_register` — Resource-managed iio_trigger_register
-* :c:func:`devm_iio_trigger_unregister` — Resource-managed
iio_trigger_unregister
* :c:func:`iio_trigger_validate_own_device` — Check if a trigger and IIO
device belong to the same device
diff --git a/MAINTAINERS b/MAINTAINERS
index e64e5db31497..dae6cd9170c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -294,6 +294,7 @@ F: drivers/gpio/gpio-104-idio-16.c
ACCES 104-QUAD-8 DRIVER
M: William Breathitt Gray <vilhelm.gray@gmail.com>
+M: Syed Nayyar Waris <syednwaris@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 5d91a6dda894..24ebe9e76915 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -238,7 +238,7 @@ config IIO_ST_ACCEL_3AXIS
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
- LNG2DM, LIS3DE, LIS2DE12
+ LNG2DM, LIS3DE, LIS2DE12, LIS2HH12
This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/accel/kxsd9-i2c.c b/drivers/iio/accel/kxsd9-i2c.c
index 38411e1c155b..b6f3de7ef8ea 100644
--- a/drivers/iio/accel/kxsd9-i2c.c
+++ b/drivers/iio/accel/kxsd9-i2c.c
@@ -21,8 +21,8 @@ static int kxsd9_i2c_probe(struct i2c_client *i2c,
regmap = devm_regmap_init_i2c(i2c, &config);
if (IS_ERR(regmap)) {
- dev_err(&i2c->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&i2c->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index 3d5bea651923..9d07642c0de1 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -135,7 +135,7 @@ static int mxc4005_read_xyz(struct mxc4005_data *data)
int ret;
ret = regmap_bulk_read(data->regmap, MXC4005_REG_XOUT_UPPER,
- (u8 *) data->buffer, sizeof(data->buffer));
+ data->buffer, sizeof(data->buffer));
if (ret < 0) {
dev_err(data->dev, "failed to read axes\n");
return ret;
@@ -150,7 +150,7 @@ static int mxc4005_read_axis(struct mxc4005_data *data,
__be16 reg;
int ret;
- ret = regmap_bulk_read(data->regmap, addr, (u8 *) &reg, sizeof(reg));
+ ret = regmap_bulk_read(data->regmap, addr, &reg, sizeof(reg));
if (ret < 0) {
dev_err(data->dev, "failed to read reg %02x\n", addr);
return ret;
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 5b13e293cade..5d356288e001 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -35,6 +35,7 @@ enum st_accel_type {
LIS2DW12,
LIS3DHH,
LIS2DE12,
+ LIS2HH12,
ST_ACCEL_MAX,
};
@@ -59,6 +60,7 @@ enum st_accel_type {
#define LIS3DHH_ACCEL_DEV_NAME "lis3dhh"
#define LIS3DE_ACCEL_DEV_NAME "lis3de"
#define LIS2DE12_ACCEL_DEV_NAME "lis2de12"
+#define LIS2HH12_ACCEL_DEV_NAME "lis2hh12"
/**
* struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index 9f2b40474b8e..b5c814ef1637 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -37,8 +37,7 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
if (err < 0)
return err;
- err = st_sensors_set_axis_enable(indio_dev,
- (u8)indio_dev->active_scan_mask[0]);
+ err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
if (err < 0)
goto st_accel_buffer_predisable;
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 7320275c7e56..43c50167d220 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -904,6 +904,83 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.multi_read_bit = true,
.bootime = 2,
},
+ {
+ .wai = 0x41,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LIS2HH12_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = 0x20,
+ .mask = 0x70,
+ .odr_avl = {
+ { .hz = 10, .value = 0x01, },
+ { .hz = 50, .value = 0x02, },
+ { .hz = 100, .value = 0x03, },
+ { .hz = 200, .value = 0x04, },
+ { .hz = 400, .value = 0x05, },
+ { .hz = 800, .value = 0x06, },
+ },
+ },
+ .pw = {
+ .addr = 0x20,
+ .mask = 0x70,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = 0x23,
+ .mask = 0x30,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = 0x00,
+ .gain = IIO_G_TO_M_S_2(61),
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = 0x02,
+ .gain = IIO_G_TO_M_S_2(122),
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = 0x03,
+ .gain = IIO_G_TO_M_S_2(244),
+ },
+ },
+ },
+ .bdu = {
+ .addr = 0x20,
+ .mask = 0x08,
+ },
+ .drdy_irq = {
+ .int1 = {
+ .addr = 0x22,
+ .mask = 0x01,
+ },
+ .int2 = {
+ .addr = 0x25,
+ .mask = 0x01,
+ },
+ .addr_ihl = 0x24,
+ .mask_ihl = 0x02,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
+ },
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
+ .multi_read_bit = true,
+ .bootime = 2,
+ },
+
};
static int st_accel_read_raw(struct iio_dev *indio_dev,
@@ -1170,8 +1247,7 @@ EXPORT_SYMBOL(st_accel_get_settings);
int st_accel_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
- struct st_sensors_platform_data *pdata =
- (struct st_sensors_platform_data *)adata->dev->platform_data;
+ struct st_sensors_platform_data *pdata = dev_get_platdata(adata->dev);
struct iio_chan_spec *channels;
size_t channels_size;
int err;
@@ -1204,8 +1280,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
"failed to apply ACPI orientation data: %d\n", err);
indio_dev->channels = channels;
- adata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &adata->sensor_settings->fs.fs_avl[0];
+ adata->current_fullscale = &adata->sensor_settings->fs.fs_avl[0];
adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
if (!pdata)
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 6b283be26ebc..360e16f2cadb 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -104,6 +104,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lis2de12",
.data = LIS2DE12_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lis2hh12",
+ .data = LIS2HH12_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -138,6 +142,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LIS2DW12_ACCEL_DEV_NAME },
{ LIS3DE_ACCEL_DEV_NAME },
{ LIS2DE12_ACCEL_DEV_NAME },
+ { LIS2HH12_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 12bb8b7ca1ff..c48c00077775 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,41 @@ config AD799X
To compile this driver as a module, choose M here: the module will be
called ad799x.
+config AD9467
+ tristate "Analog Devices AD9467 High Speed ADC driver"
+ depends on SPI
+ select ADI_AXI_ADC
+ help
+ Say yes here to build support for Analog Devices:
+ * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
+
+ The driver requires the assistance of the AXI ADC IP core to operate,
+ since SPI is used for configuration only, while data has to be
+ streamed into memory via DMA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad9467.
+
+config ADI_AXI_ADC
+ tristate "Analog Devices Generic AXI ADC IP core driver"
+ select IIO_BUFFER
+ select IIO_BUFFER_HW_CONSUMER
+ select IIO_BUFFER_DMAENGINE
+ help
+ Say yes here to build support for Analog Devices Generic
+ AXI ADC IP core. The IP core is used for interfacing with
+ analog-to-digital (ADC) converters that require either a high-speed
+ serial interface (JESD204B/C) or a source synchronous parallel
+ interface (LVDS/CMOS).
+ Typically (for such devices) SPI will be used for configuration only,
+ while this IP core handles the streaming of data into memory via DMA.
+
+ Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called adi-axi-adc.
+
config ASPEED_ADC
tristate "Aspeed ADC"
depends on ARCH_ASPEED || COMPILE_TEST
@@ -595,6 +630,16 @@ config MAX1118
To compile this driver as a module, choose M here: the module will be
called max1118.
+config MAX1241
+ tristate "Maxim max1241 ADC driver"
+ depends on SPI_MASTER
+ help
+ Say yes here to build support for Maxim max1241 12-bit, single-channel
+ ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called max1241.
+
config MAX1363
tristate "Maxim max1363 ADC driver"
depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 637807861112..2f5bc224412b 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD7949) += ad7949.o
obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_AD9467) += ad9467.o
+obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
@@ -57,6 +59,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX11100) += max11100.o
obj-$(CONFIG_MAX1118) += max1118.o
+obj-$(CONFIG_MAX1241) += max1241.o
obj-$(CONFIG_MAX1363) += max1363.o
obj-$(CONFIG_MAX9611) += max9611.o
obj-$(CONFIG_MCP320X) += mcp320x.o
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 76747488044b..e9984a38fc4c 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -12,9 +12,11 @@
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -27,6 +29,8 @@ struct ad7476_state;
struct ad7476_chip_info {
unsigned int int_vref_uv;
struct iio_chan_spec channel[2];
+ /* channels used when convst gpio is defined */
+ struct iio_chan_spec convst_channel[2];
void (*reset)(struct ad7476_state *);
};
@@ -34,6 +38,7 @@ struct ad7476_state {
struct spi_device *spi;
const struct ad7476_chip_info *chip_info;
struct regulator *reg;
+ struct gpio_desc *convst_gpio;
struct spi_transfer xfer;
struct spi_message msg;
/*
@@ -64,6 +69,17 @@ enum ad7476_supported_device_ids {
ID_ADS7868,
};
+static void ad7091_convst(struct ad7476_state *st)
+{
+ if (!st->convst_gpio)
+ return;
+
+ gpiod_set_value(st->convst_gpio, 0);
+ udelay(1); /* CONVST pulse width: 10 ns min */
+ gpiod_set_value(st->convst_gpio, 1);
+ udelay(1); /* Conversion time: 650 ns max */
+}
+
static irqreturn_t ad7476_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
@@ -71,6 +87,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p)
struct ad7476_state *st = iio_priv(indio_dev);
int b_sent;
+ ad7091_convst(st);
+
b_sent = spi_sync(st->spi, &st->msg);
if (b_sent < 0)
goto done;
@@ -93,6 +111,8 @@ static int ad7476_scan_direct(struct ad7476_state *st)
{
int ret;
+ ad7091_convst(st);
+
ret = spi_sync(st->spi, &st->msg);
if (ret)
return ret;
@@ -160,6 +180,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
#define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
BIT(IIO_CHAN_INFO_RAW))
#define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
+#define AD7091R_CONVST_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), \
+ BIT(IIO_CHAN_INFO_RAW))
#define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
BIT(IIO_CHAN_INFO_RAW))
@@ -167,6 +189,8 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
[ID_AD7091R] = {
.channel[0] = AD7091R_CHAN(12),
.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+ .convst_channel[0] = AD7091R_CONVST_CHAN(12),
+ .convst_channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
.reset = ad7091_reset,
},
[ID_AD7276] = {
@@ -232,6 +256,13 @@ static const struct iio_info ad7476_info = {
.read_raw = &ad7476_read_raw,
};
+static void ad7476_reg_disable(void *data)
+{
+ struct ad7476_state *st = data;
+
+ regulator_disable(st->reg);
+}
+
static int ad7476_probe(struct spi_device *spi)
{
struct ad7476_state *st;
@@ -254,6 +285,17 @@ static int ad7476_probe(struct spi_device *spi)
if (ret)
return ret;
+ ret = devm_add_action_or_reset(&spi->dev, ad7476_reg_disable,
+ st);
+ if (ret)
+ return ret;
+
+ st->convst_gpio = devm_gpiod_get_optional(&spi->dev,
+ "adi,conversion-start",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->convst_gpio))
+ return PTR_ERR(st->convst_gpio);
+
spi_set_drvdata(spi, indio_dev);
st->spi = spi;
@@ -266,6 +308,9 @@ static int ad7476_probe(struct spi_device *spi)
indio_dev->channels = st->chip_info->channel;
indio_dev->num_channels = 2;
indio_dev->info = &ad7476_info;
+
+ if (st->convst_gpio && st->chip_info->convst_channel)
+ indio_dev->channels = st->chip_info->convst_channel;
/* Setup default message */
st->xfer.rx_buf = &st->data;
@@ -295,19 +340,8 @@ error_disable_reg:
return ret;
}
-static int ad7476_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7476_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- iio_triggered_buffer_cleanup(indio_dev);
- regulator_disable(st->reg);
-
- return 0;
-}
-
static const struct spi_device_id ad7476_id[] = {
+ {"ad7091", ID_AD7091R},
{"ad7091r", ID_AD7091R},
{"ad7273", ID_AD7277},
{"ad7274", ID_AD7276},
@@ -343,7 +377,6 @@ static struct spi_driver ad7476_driver = {
.name = "ad7476",
},
.probe = ad7476_probe,
- .remove = ad7476_remove,
.id_table = ad7476_id,
};
module_spi_driver(ad7476_driver);
diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c
index 291c1a898129..f47606ebbbbe 100644
--- a/drivers/iio/adc/ad7780.c
+++ b/drivers/iio/adc/ad7780.c
@@ -206,10 +206,29 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
.irq_flags = IRQF_TRIGGER_LOW,
};
-#define AD7780_CHANNEL(bits, wordsize) \
- AD_SD_CHANNEL(1, 0, 0, bits, 32, (wordsize) - (bits))
-#define AD7170_CHANNEL(bits, wordsize) \
- AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, (wordsize) - (bits))
+#define _AD7780_CHANNEL(_bits, _wordsize, _mask_all) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = 0, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = _mask_all, \
+ .scan_index = 1, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_bits), \
+ .storagebits = 32, \
+ .shift = (_wordsize) - (_bits), \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+#define AD7780_CHANNEL(_bits, _wordsize) \
+ _AD7780_CHANNEL(_bits, _wordsize, BIT(IIO_CHAN_INFO_SAMP_FREQ))
+#define AD7170_CHANNEL(_bits, _wordsize) \
+ _AD7780_CHANNEL(_bits, _wordsize, 0)
static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
[ID_AD7170] = {
diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c
index abb239392631..48432b6f6002 100644
--- a/drivers/iio/adc/ad7791.c
+++ b/drivers/iio/adc/ad7791.c
@@ -64,25 +64,73 @@
#define AD7791_MODE_SEL_MASK (0x3 << 6)
#define AD7791_MODE_SEL(x) ((x) << 6)
+#define __AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift, _extend_name, _type, _mask_all) \
+ { \
+ .type = (_type), \
+ .differential = (_channel2 == -1 ? 0 : 1), \
+ .indexed = 1, \
+ .channel = (_channel1), \
+ .channel2 = (_channel2), \
+ .address = (_address), \
+ .extend_name = (_extend_name), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = _mask_all, \
+ .scan_index = (_si), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_bits), \
+ .storagebits = (_storagebits), \
+ .shift = (_shift), \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+#define AD7991_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7991_CHANNEL(_si, _channel, _channel, _address, _bits, \
+ _storagebits, _shift, "shorted", IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_CHANNEL(_si, _channel, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
+ _storagebits, _shift, NULL, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7991_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift, NULL, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7991_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
+ _shift) \
+ __AD7991_CHANNEL(_si, _channel, -1, _address, _bits, \
+ _storagebits, _shift, "supply", IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
#define DECLARE_AD7787_CHANNELS(name, bits, storagebits) \
const struct iio_chan_spec name[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+ AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
(bits), (storagebits), 0), \
- AD_SD_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
- AD_SD_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
+ AD7991_CHANNEL(1, 1, AD7791_CH_AIN2, (bits), (storagebits), 0), \
+ AD7991_SHORTED_CHANNEL(2, 0, AD7791_CH_AIN1N_AIN1N, \
(bits), (storagebits), 0), \
- AD_SD_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR, \
+ AD7991_SUPPLY_CHANNEL(3, 2, AD7791_CH_AVDD_MONITOR, \
(bits), (storagebits), 0), \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}
#define DECLARE_AD7791_CHANNELS(name, bits, storagebits) \
const struct iio_chan_spec name[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
+ AD7991_DIFF_CHANNEL(0, 0, 0, AD7791_CH_AIN1P_AIN1N, \
(bits), (storagebits), 0), \
- AD_SD_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
+ AD7991_SHORTED_CHANNEL(1, 0, AD7791_CH_AIN1N_AIN1N, \
(bits), (storagebits), 0), \
- AD_SD_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
+ AD7991_SUPPLY_CHANNEL(2, 1, AD7791_CH_AVDD_MONITOR, \
(bits), (storagebits), 0), \
IIO_CHAN_SOFT_TIMESTAMP(3), \
}
@@ -444,5 +492,5 @@ static struct spi_driver ad7791_driver = {
module_spi_driver(ad7791_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-MODULE_DESCRIPTION("Analog Device AD7787/AD7788/AD7789/AD7790/AD7791 ADC driver");
+MODULE_DESCRIPTION("Analog Devices AD7787/AD7788/AD7789/AD7790/AD7791 ADC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index b747db97f78a..7005bde50a76 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -354,29 +354,28 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797,
sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4");
-static ssize_t ad7793_show_scale_available(struct device *dev,
- struct device_attribute *attr, char *buf)
+static int ad7793_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ad7793_state *st = iio_priv(indio_dev);
- int i, len = 0;
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
- len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
- st->scale_avail[i][1]);
-
- len += sprintf(buf + len, "\n");
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (int *)st->scale_avail;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ /* Values are stored in a 2D matrix */
+ *length = ARRAY_SIZE(st->scale_avail) * 2;
- return len;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
}
-static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available,
- in_voltage-voltage_scale_available, S_IRUGO,
- ad7793_show_scale_available, NULL, 0);
-
static struct attribute *ad7793_attributes[] = {
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
NULL
};
@@ -534,6 +533,7 @@ static const struct iio_info ad7793_info = {
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
+ .read_avail = ad7793_read_avail,
.attrs = &ad7793_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
@@ -546,47 +546,113 @@ static const struct iio_info ad7797_info = {
.validate_trigger = ad_sd_validate_trigger,
};
+#define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \
+ { \
+ .type = (_type), \
+ .differential = (_channel2 == -1 ? 0 : 1), \
+ .indexed = 1, \
+ .channel = (_channel1), \
+ .channel2 = (_channel2), \
+ .address = (_address), \
+ .extend_name = (_extend_name), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = (_mask_type_av), \
+ .info_mask_shared_by_all = _mask_all, \
+ .scan_index = (_si), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_bits), \
+ .storagebits = (_storagebits), \
+ .shift = (_shift), \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+#define AD7793_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift, NULL, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
+ _storagebits, _shift, "shorted", IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
+ __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \
+ _storagebits, _shift, NULL, IIO_TEMP, \
+ 0, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
+ _shift) \
+ __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \
+ _storagebits, _shift, "supply", IIO_VOLTAGE, \
+ 0, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+ _storagebits, _shift, NULL, IIO_VOLTAGE, \
+ 0, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
+#define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+ _storagebits, _shift) \
+ __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
+ _storagebits, _shift, "shorted", IIO_VOLTAGE, \
+ 0, \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ))
+
#define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
- AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
- AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
- AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
- AD_SD_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
- AD_SD_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
+ AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
+ AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
+ AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
+ AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
+ AD7793_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
+ AD7793_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
IIO_CHAN_SOFT_TIMESTAMP(6), \
}
#define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
- AD_SD_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
- AD_SD_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
- AD_SD_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
+ AD7793_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD7793_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
+ AD7793_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(9), \
}
#define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
- AD_SD_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
- AD_SD_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
- AD_SD_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
+ AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}
#define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \
const struct iio_chan_spec _name##_channels[] = { \
- AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
- AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
- AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
- AD_SD_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
+ AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
+ AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
+ AD7793_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
IIO_CHAN_SOFT_TIMESTAMP(5), \
}
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
new file mode 100644
index 000000000000..1e8fd83b9bc2
--- /dev/null
+++ b/drivers/iio/adc/ad9467.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD9467 SPI ADC driver
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/clk.h>
+
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/*
+ * ADI High-Speed ADC common spi interface registers
+ * See Application-Note AN-877:
+ * https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+ */
+
+#define AN877_ADC_REG_CHIP_PORT_CONF 0x00
+#define AN877_ADC_REG_CHIP_ID 0x01
+#define AN877_ADC_REG_CHIP_GRADE 0x02
+#define AN877_ADC_REG_CHAN_INDEX 0x05
+#define AN877_ADC_REG_TRANSFER 0xFF
+#define AN877_ADC_REG_MODES 0x08
+#define AN877_ADC_REG_TEST_IO 0x0D
+#define AN877_ADC_REG_ADC_INPUT 0x0F
+#define AN877_ADC_REG_OFFSET 0x10
+#define AN877_ADC_REG_OUTPUT_MODE 0x14
+#define AN877_ADC_REG_OUTPUT_ADJUST 0x15
+#define AN877_ADC_REG_OUTPUT_PHASE 0x16
+#define AN877_ADC_REG_OUTPUT_DELAY 0x17
+#define AN877_ADC_REG_VREF 0x18
+#define AN877_ADC_REG_ANALOG_INPUT 0x2C
+
+/* AN877_ADC_REG_TEST_IO */
+#define AN877_ADC_TESTMODE_OFF 0x0
+#define AN877_ADC_TESTMODE_MIDSCALE_SHORT 0x1
+#define AN877_ADC_TESTMODE_POS_FULLSCALE 0x2
+#define AN877_ADC_TESTMODE_NEG_FULLSCALE 0x3
+#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD 0x4
+#define AN877_ADC_TESTMODE_PN23_SEQ 0x5
+#define AN877_ADC_TESTMODE_PN9_SEQ 0x6
+#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE 0x7
+#define AN877_ADC_TESTMODE_USER 0x8
+#define AN877_ADC_TESTMODE_BIT_TOGGLE 0x9
+#define AN877_ADC_TESTMODE_SYNC 0xA
+#define AN877_ADC_TESTMODE_ONE_BIT_HIGH 0xB
+#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY 0xC
+#define AN877_ADC_TESTMODE_RAMP 0xF
+
+/* AN877_ADC_REG_TRANSFER */
+#define AN877_ADC_TRANSFER_SYNC 0x1
+
+/* AN877_ADC_REG_OUTPUT_MODE */
+#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY 0x0
+#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT 0x1
+#define AN877_ADC_OUTPUT_MODE_GRAY_CODE 0x2
+
+/* AN877_ADC_REG_OUTPUT_PHASE */
+#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN 0x20
+#define AN877_ADC_INVERT_DCO_CLK 0x80
+
+/* AN877_ADC_REG_OUTPUT_DELAY */
+#define AN877_ADC_DCO_DELAY_ENABLE 0x80
+
+/*
+ * Analog Devices AD9467 16-Bit, 200/250 MSPS ADC
+ */
+
+#define CHIPID_AD9467 0x50
+#define AD9467_DEF_OUTPUT_MODE 0x08
+#define AD9467_REG_VREF_MASK 0x0F
+
+enum {
+ ID_AD9467,
+};
+
+struct ad9467_state {
+ struct spi_device *spi;
+ struct clk *clk;
+ unsigned int output_mode;
+
+ struct gpio_desc *pwrdown_gpio;
+ struct gpio_desc *reset_gpio;
+};
+
+static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
+{
+ unsigned char tbuf[2], rbuf[1];
+ int ret;
+
+ tbuf[0] = 0x80 | (reg >> 8);
+ tbuf[1] = reg & 0xFF;
+
+ ret = spi_write_then_read(spi,
+ tbuf, ARRAY_SIZE(tbuf),
+ rbuf, ARRAY_SIZE(rbuf));
+
+ if (ret < 0)
+ return ret;
+
+ return rbuf[0];
+}
+
+static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
+ unsigned int val)
+{
+ unsigned char buf[3];
+
+ buf[0] = reg >> 8;
+ buf[1] = reg & 0xFF;
+ buf[2] = val;
+
+ return spi_write(spi, buf, ARRAY_SIZE(buf));
+}
+
+static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ struct spi_device *spi = st->spi;
+ int ret;
+
+ if (readval == NULL) {
+ ret = ad9467_spi_write(spi, reg, writeval);
+ ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return ret;
+ }
+
+ ret = ad9467_spi_read(spi, reg);
+ if (ret < 0)
+ return ret;
+ *readval = ret;
+
+ return 0;
+}
+
+static const unsigned int ad9467_scale_table[][2] = {
+ {2000, 0}, {2100, 6}, {2200, 7},
+ {2300, 8}, {2400, 9}, {2500, 10},
+};
+
+static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
+ unsigned int *val, unsigned int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ const struct iio_chan_spec *chan = &info->channels[0];
+ unsigned int tmp;
+
+ tmp = (info->scale_table[index][0] * 1000000ULL) >>
+ chan->scan_type.realbits;
+ *val = tmp / 1000000;
+ *val2 = tmp % 1000000;
+}
+
+#define AD9467_CHAN(_chan, _si, _bits, _sign) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = _chan, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _si, \
+ .scan_type = { \
+ .sign = _sign, \
+ .realbits = _bits, \
+ .storagebits = 16, \
+ }, \
+}
+
+static const struct iio_chan_spec ad9467_channels[] = {
+ AD9467_CHAN(0, 0, 16, 'S'),
+};
+
+static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = {
+ [ID_AD9467] = {
+ .id = CHIPID_AD9467,
+ .max_rate = 250000000UL,
+ .scale_table = ad9467_scale_table,
+ .num_scales = ARRAY_SIZE(ad9467_scale_table),
+ .channels = ad9467_channels,
+ .num_channels = ARRAY_SIZE(ad9467_channels),
+ },
+};
+
+static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int i, vref_val, vref_mask;
+
+ vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
+
+ switch (info->id) {
+ case CHIPID_AD9467:
+ vref_mask = AD9467_REG_VREF_MASK;
+ break;
+ default:
+ vref_mask = 0xFFFF;
+ break;
+ }
+
+ vref_val &= vref_mask;
+
+ for (i = 0; i < info->num_scales; i++) {
+ if (vref_val == info->scale_table[i][1])
+ break;
+ }
+
+ if (i == info->num_scales)
+ return -ERANGE;
+
+ __ad9467_get_scale(conv, i, val, val2);
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ unsigned int scale_val[2];
+ unsigned int i;
+
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < info->num_scales; i++) {
+ __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
+ if (scale_val[0] != val || scale_val[1] != val2)
+ continue;
+
+ ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
+ info->scale_table[i][1]);
+ ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_get_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = clk_get_rate(st->clk);
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ const struct adi_axi_adc_chip_info *info = conv->chip_info;
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+ long r_clk;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return ad9467_set_scale(conv, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ r_clk = clk_round_rate(st->clk, val);
+ if (r_clk < 0 || r_clk > info->max_rate) {
+ dev_warn(&st->spi->dev,
+ "Error setting ADC sample rate %ld", r_clk);
+ return -EINVAL;
+ }
+
+ return clk_set_rate(st->clk, r_clk);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
+{
+ int ret;
+
+ ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
+ if (ret < 0)
+ return ret;
+
+ return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
+ AN877_ADC_TRANSFER_SYNC);
+}
+
+static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
+{
+ struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
+
+ return ad9467_outputmode_set(st->spi, st->output_mode);
+}
+
+static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id)
+{
+ switch (chip_id) {
+ case CHIPID_AD9467:
+ st->output_mode = AD9467_DEF_OUTPUT_MODE |
+ AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void ad9467_clk_disable(void *data)
+{
+ struct ad9467_state *st = data;
+
+ clk_disable_unprepare(st->clk);
+}
+
+static int ad9467_probe(struct spi_device *spi)
+{
+ const struct adi_axi_adc_chip_info *info;
+ struct adi_axi_adc_conv *conv;
+ struct ad9467_state *st;
+ unsigned int id;
+ int ret;
+
+ info = of_device_get_match_data(&spi->dev);
+ if (!info)
+ return -ENODEV;
+
+ conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
+ if (IS_ERR(conv))
+ return PTR_ERR(conv);
+
+ st = adi_axi_adc_conv_priv(conv);
+ st->spi = spi;
+
+ st->clk = devm_clk_get(&spi->dev, "adc-clk");
+ if (IS_ERR(st->clk))
+ return PTR_ERR(st->clk);
+
+ ret = clk_prepare_enable(st->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
+ if (ret)
+ return ret;
+
+ st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->pwrdown_gpio))
+ return PTR_ERR(st->pwrdown_gpio);
+
+ st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->reset_gpio))
+ return PTR_ERR(st->reset_gpio);
+
+ if (st->reset_gpio) {
+ udelay(1);
+ ret = gpiod_direction_output(st->reset_gpio, 1);
+ if (ret)
+ return ret;
+ mdelay(10);
+ }
+
+ spi_set_drvdata(spi, st);
+
+ conv->chip_info = info;
+
+ id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
+ if (id != conv->chip_info->id) {
+ dev_err(&spi->dev, "Unrecognized CHIP_ID 0x%X\n", id);
+ return -ENODEV;
+ }
+
+ conv->reg_access = ad9467_reg_access;
+ conv->write_raw = ad9467_write_raw;
+ conv->read_raw = ad9467_read_raw;
+ conv->preenable_setup = ad9467_preenable_setup;
+
+ return ad9467_setup(st, id);
+}
+
+static const struct of_device_id ad9467_of_match[] = {
+ { .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ad9467_of_match);
+
+static struct spi_driver ad9467_driver = {
+ .driver = {
+ .name = "ad9467",
+ .of_match_table = ad9467_of_match,
+ },
+ .probe = ad9467_probe,
+};
+module_spi_driver(ad9467_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
new file mode 100644
index 000000000000..c24c8da99eb4
--- /dev/null
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices Generic AXI ADC IP core
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/buffer-dmaengine.h>
+
+#include <linux/fpga/adi-axi-common.h>
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/**
+ * Register definitions:
+ * https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map
+ */
+
+/* ADC controls */
+
+#define ADI_AXI_REG_RSTN 0x0040
+#define ADI_AXI_REG_RSTN_CE_N BIT(2)
+#define ADI_AXI_REG_RSTN_MMCM_RSTN BIT(1)
+#define ADI_AXI_REG_RSTN_RSTN BIT(0)
+
+/* ADC Channel controls */
+
+#define ADI_AXI_REG_CHAN_CTRL(c) (0x0400 + (c) * 0x40)
+#define ADI_AXI_REG_CHAN_CTRL_LB_OWR BIT(11)
+#define ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR BIT(10)
+#define ADI_AXI_REG_CHAN_CTRL_IQCOR_EN BIT(9)
+#define ADI_AXI_REG_CHAN_CTRL_DCFILT_EN BIT(8)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT BIT(6)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_TYPE BIT(5)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_EN BIT(4)
+#define ADI_AXI_REG_CHAN_CTRL_PN_TYPE_OWR BIT(1)
+#define ADI_AXI_REG_CHAN_CTRL_ENABLE BIT(0)
+
+#define ADI_AXI_REG_CHAN_CTRL_DEFAULTS \
+ (ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT | \
+ ADI_AXI_REG_CHAN_CTRL_FMT_EN | \
+ ADI_AXI_REG_CHAN_CTRL_ENABLE)
+
+struct adi_axi_adc_core_info {
+ unsigned int version;
+};
+
+struct adi_axi_adc_state {
+ struct mutex lock;
+
+ struct adi_axi_adc_client *client;
+ void __iomem *regs;
+};
+
+struct adi_axi_adc_client {
+ struct list_head entry;
+ struct adi_axi_adc_conv conv;
+ struct adi_axi_adc_state *state;
+ struct device *dev;
+ const struct adi_axi_adc_core_info *info;
+};
+
+static LIST_HEAD(registered_clients);
+static DEFINE_MUTEX(registered_clients_lock);
+
+static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv)
+{
+ return container_of(conv, struct adi_axi_adc_client, conv);
+}
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+}
+EXPORT_SYMBOL_GPL(adi_axi_adc_conv_priv);
+
+static void adi_axi_adc_write(struct adi_axi_adc_state *st,
+ unsigned int reg,
+ unsigned int val)
+{
+ iowrite32(val, st->regs + reg);
+}
+
+static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st,
+ unsigned int reg)
+{
+ return ioread32(st->regs + reg);
+}
+
+static int adi_axi_adc_config_dma_buffer(struct device *dev,
+ struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+ const char *dma_name;
+
+ if (!device_property_present(dev, "dmas"))
+ return 0;
+
+ if (device_property_read_string(dev, "dma-names", &dma_name))
+ dma_name = "rx";
+
+ buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent,
+ dma_name);
+ if (IS_ERR(buffer))
+ return PTR_ERR(buffer);
+
+ indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+ iio_device_attach_buffer(indio_dev, buffer);
+
+ return 0;
+}
+
+static int adi_axi_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->read_raw)
+ return -EOPNOTSUPP;
+
+ return conv->read_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->write_raw)
+ return -EOPNOTSUPP;
+
+ return conv->write_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ unsigned int i, ctrl;
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ ctrl = adi_axi_adc_read(st, ADI_AXI_REG_CHAN_CTRL(i));
+
+ if (test_bit(i, scan_mask))
+ ctrl |= ADI_AXI_REG_CHAN_CTRL_ENABLE;
+ else
+ ctrl &= ~ADI_AXI_REG_CHAN_CTRL_ENABLE;
+
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), ctrl);
+ }
+
+ return 0;
+}
+
+static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_client *cl;
+ size_t alloc_size;
+
+ alloc_size = ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+ if (sizeof_priv)
+ alloc_size += ALIGN(sizeof_priv, IIO_ALIGN);
+
+ cl = kzalloc(alloc_size, GFP_KERNEL);
+ if (!cl)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&registered_clients_lock);
+
+ cl->dev = get_device(dev);
+
+ list_add_tail(&cl->entry, &registered_clients);
+
+ mutex_unlock(&registered_clients_lock);
+
+ return &cl->conv;
+}
+
+static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ mutex_lock(&registered_clients_lock);
+
+ list_del(&cl->entry);
+ put_device(cl->dev);
+
+ mutex_unlock(&registered_clients_lock);
+
+ kfree(cl);
+}
+
+static void devm_adi_axi_adc_conv_release(struct device *dev, void *res)
+{
+ adi_axi_adc_conv_unregister(*(struct adi_axi_adc_conv **)res);
+}
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_conv **ptr, *conv;
+
+ ptr = devres_alloc(devm_adi_axi_adc_conv_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ conv = adi_axi_adc_conv_register(dev, sizeof_priv);
+ if (IS_ERR(conv)) {
+ devres_free(ptr);
+ return ERR_CAST(conv);
+ }
+
+ *ptr = conv;
+ devres_add(dev, ptr);
+
+ return conv;
+}
+EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register);
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < conv->chip_info->num_scales; i++) {
+ const unsigned int *s = conv->chip_info->scale_table[i];
+
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%u.%06u ", s[0], s[1]);
+ }
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+enum {
+ ADI_AXI_ATTR_SCALE_AVAIL,
+};
+
+#define ADI_AXI_ATTR(_en_, _file_) \
+ [ADI_AXI_ATTR_##_en_] = &iio_dev_attr_##_file_.dev_attr.attr
+
+static struct attribute *adi_axi_adc_attributes[] = {
+ ADI_AXI_ATTR(SCALE_AVAIL, in_voltage_scale_available),
+ NULL
+};
+
+static umode_t axi_adc_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ switch (n) {
+ case ADI_AXI_ATTR_SCALE_AVAIL:
+ if (!conv->chip_info->num_scales)
+ return 0;
+ return attr->mode;
+ default:
+ return attr->mode;
+ }
+}
+
+static const struct attribute_group adi_axi_adc_attribute_group = {
+ .attrs = adi_axi_adc_attributes,
+ .is_visible = axi_adc_attr_is_visible,
+};
+
+static const struct iio_info adi_axi_adc_info = {
+ .read_raw = &adi_axi_adc_read_raw,
+ .write_raw = &adi_axi_adc_write_raw,
+ .attrs = &adi_axi_adc_attribute_group,
+ .update_scan_mode = &adi_axi_adc_update_scan_mode,
+};
+
+static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = {
+ .version = ADI_AXI_PCORE_VER(10, 0, 'a'),
+};
+
+static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
+{
+ const struct adi_axi_adc_core_info *info;
+ struct adi_axi_adc_client *cl;
+ struct device_node *cln;
+
+ info = of_device_get_match_data(dev);
+ if (!info)
+ return ERR_PTR(-ENODEV);
+
+ cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0);
+ if (!cln) {
+ dev_err(dev, "No 'adi,adc-dev' node defined\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ mutex_lock(&registered_clients_lock);
+
+ list_for_each_entry(cl, &registered_clients, entry) {
+ if (!cl->dev)
+ continue;
+
+ if (cl->dev->of_node != cln)
+ continue;
+
+ if (!try_module_get(dev->driver->owner)) {
+ mutex_unlock(&registered_clients_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ get_device(dev);
+ cl->info = info;
+ mutex_unlock(&registered_clients_lock);
+ return cl;
+ }
+
+ mutex_unlock(&registered_clients_lock);
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int adi_axi_adc_setup_channels(struct device *dev,
+ struct adi_axi_adc_state *st)
+{
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ int i, ret;
+
+ if (conv->preenable_setup) {
+ ret = conv->preenable_setup(conv);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i),
+ ADI_AXI_REG_CHAN_CTRL_DEFAULTS);
+ }
+
+ return 0;
+}
+
+static void axi_adc_reset(struct adi_axi_adc_state *st)
+{
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, 0);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, ADI_AXI_REG_RSTN_MMCM_RSTN);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN,
+ ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN);
+}
+
+static void adi_axi_adc_cleanup(void *data)
+{
+ struct adi_axi_adc_client *cl = data;
+
+ put_device(cl->dev);
+ module_put(cl->dev->driver->owner);
+}
+
+static int adi_axi_adc_probe(struct platform_device *pdev)
+{
+ struct adi_axi_adc_conv *conv;
+ struct iio_dev *indio_dev;
+ struct adi_axi_adc_client *cl;
+ struct adi_axi_adc_state *st;
+ unsigned int ver;
+ int ret;
+
+ cl = adi_axi_adc_attach_client(&pdev->dev);
+ if (IS_ERR(cl))
+ return PTR_ERR(cl);
+
+ ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl);
+ if (ret)
+ return ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->client = cl;
+ cl->state = st;
+ mutex_init(&st->lock);
+
+ st->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(st->regs))
+ return PTR_ERR(st->regs);
+
+ conv = &st->client->conv;
+
+ axi_adc_reset(st);
+
+ ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION);
+
+ if (cl->info->version > ver) {
+ dev_err(&pdev->dev,
+ "IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+ ADI_AXI_PCORE_VER_MAJOR(cl->info->version),
+ ADI_AXI_PCORE_VER_MINOR(cl->info->version),
+ ADI_AXI_PCORE_VER_PATCH(cl->info->version),
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+ return -ENODEV;
+ }
+
+ indio_dev->info = &adi_axi_adc_info;
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = "adi-axi-adc";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->num_channels = conv->chip_info->num_channels;
+ indio_dev->channels = conv->chip_info->channels;
+
+ ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = adi_axi_adc_setup_channels(&pdev->dev, st);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n",
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+
+ return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id adi_axi_adc_of_match[] = {
+ { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info },
+ { /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match);
+
+static struct platform_driver adi_axi_adc_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = adi_axi_adc_of_match,
+ },
+ .probe = adi_axi_adc_probe,
+};
+module_platform_driver(adi_axi_adc_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index abe99856c823..0368b6dc6d60 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1152,7 +1152,6 @@ static int at91_adc_probe(struct platform_device *pdev)
int ret;
struct iio_dev *idev;
struct at91_adc_state *st;
- struct resource *res;
u32 reg;
idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state));
@@ -1182,9 +1181,7 @@ static int at91_adc_probe(struct platform_device *pdev)
if (st->irq < 0)
return -ENODEV;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- st->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ st->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(st->reg_base))
return PTR_ERR(st->reg_base);
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index fa71489195c6..b0a4dc88ba9b 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -294,7 +294,6 @@ static int mx25_gcq_probe(struct platform_device *pdev)
struct mx25_gcq_priv *priv;
struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
struct device *dev = &pdev->dev;
- struct resource *res;
void __iomem *mem;
int ret;
int i;
@@ -305,8 +304,7 @@ static int mx25_gcq_probe(struct platform_device *pdev)
priv = iio_priv(indio_dev);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mem = devm_ioremap_resource(dev, res);
+ mem = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mem))
return PTR_ERR(mem);
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index c35a1beb817c..a6d2e1f27e76 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -75,7 +75,7 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
struct regmap *regmap = adc->regmap;
unsigned int req;
long timeout;
- u8 buf[2];
+ __be16 value;
int ret;
reinit_completion(&adc->completion);
@@ -105,11 +105,11 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
goto done;
}
- ret = regmap_bulk_read(regmap, chan->address, buf, 2);
+ ret = regmap_bulk_read(regmap, chan->address, &value, sizeof(value));
if (ret)
goto done;
- *result = get_unaligned_be16(buf);
+ *result = be16_to_cpu(value);
ret = IIO_VAL_INT;
done:
diff --git a/drivers/iio/adc/max1241.c b/drivers/iio/adc/max1241.c
new file mode 100644
index 000000000000..541939c7abca
--- /dev/null
+++ b/drivers/iio/adc/max1241.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MAX1241 low-power, 12-bit serial ADC
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define MAX1241_VAL_MASK GENMASK(11, 0)
+#define MAX1241_SHUTDOWN_DELAY_USEC 4
+
+enum max1241_id {
+ max1241,
+};
+
+struct max1241 {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct regulator *vdd;
+ struct regulator *vref;
+ struct gpio_desc *shutdown;
+
+ __be16 data ____cacheline_aligned;
+};
+
+static const struct iio_chan_spec max1241_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static int max1241_read(struct max1241 *adc)
+{
+ struct spi_transfer xfers[] = {
+ /*
+ * Begin conversion by bringing /CS low for at least
+ * tconv us.
+ */
+ {
+ .len = 0,
+ .delay.value = 8,
+ .delay.unit = SPI_DELAY_UNIT_USECS,
+ },
+ /*
+ * Then read two bytes of data in our RX buffer.
+ */
+ {
+ .rx_buf = &adc->data,
+ .len = 2,
+ },
+ };
+
+ return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
+}
+
+static int max1241_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret, vref_uV;
+ struct max1241 *adc = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&adc->lock);
+
+ if (adc->shutdown) {
+ gpiod_set_value(adc->shutdown, 0);
+ udelay(MAX1241_SHUTDOWN_DELAY_USEC);
+ ret = max1241_read(adc);
+ gpiod_set_value(adc->shutdown, 1);
+ } else
+ ret = max1241_read(adc);
+
+ if (ret) {
+ mutex_unlock(&adc->lock);
+ return ret;
+ }
+
+ *val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
+
+ mutex_unlock(&adc->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ vref_uV = regulator_get_voltage(adc->vref);
+
+ if (vref_uV < 0)
+ return vref_uV;
+
+ *val = vref_uV / 1000;
+ *val2 = 12;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info max1241_info = {
+ .read_raw = max1241_read_raw,
+};
+
+static void max1241_disable_vdd_action(void *data)
+{
+ struct max1241 *adc = data;
+ struct device *dev = &adc->spi->dev;
+ int err;
+
+ err = regulator_disable(adc->vdd);
+ if (err)
+ dev_err(dev, "could not disable vdd regulator.\n");
+}
+
+static void max1241_disable_vref_action(void *data)
+{
+ struct max1241 *adc = data;
+ struct device *dev = &adc->spi->dev;
+ int err;
+
+ err = regulator_disable(adc->vref);
+ if (err)
+ dev_err(dev, "could not disable vref regulator.\n");
+}
+
+static int max1241_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct iio_dev *indio_dev;
+ struct max1241 *adc;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(indio_dev);
+ adc->spi = spi;
+ mutex_init(&adc->lock);
+
+ spi_set_drvdata(spi, indio_dev);
+
+ adc->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(adc->vdd)) {
+ dev_err(dev, "failed to get vdd regulator\n");
+ return PTR_ERR(adc->vdd);
+ }
+
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
+ if (ret) {
+ dev_err(dev, "could not set up vdd regulator cleanup action\n");
+ return ret;
+ }
+
+ adc->vref = devm_regulator_get(dev, "vref");
+ if (IS_ERR(adc->vref)) {
+ dev_err(dev, "failed to get vref regulator\n");
+ return PTR_ERR(adc->vref);
+ }
+
+ ret = regulator_enable(adc->vref);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
+ if (ret) {
+ dev_err(dev, "could not set up vref regulator cleanup action\n");
+ return ret;
+ }
+
+ adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(adc->shutdown))
+ return PTR_ERR(adc->shutdown);
+
+ if (adc->shutdown)
+ dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
+ else
+ dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
+
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = dev;
+ indio_dev->info = &max1241_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = max1241_channels;
+ indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct spi_device_id max1241_id[] = {
+ { "max1241", max1241 },
+ {}
+};
+
+static const struct of_device_id max1241_dt_ids[] = {
+ { .compatible = "maxim,max1241" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, max1241_dt_ids);
+
+static struct spi_driver max1241_spi_driver = {
+ .driver = {
+ .name = "max1241",
+ .of_match_table = max1241_dt_ids,
+ },
+ .probe = max1241_probe,
+ .id_table = max1241_id,
+};
+module_spi_driver(max1241_spi_driver);
+
+MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
+MODULE_DESCRIPTION("MAX1241 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 5c2cc61b666e..9d92017c79b2 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -150,6 +150,7 @@ struct max1363_chip_info {
* @current_mode: the scan mode of this chip
* @requestedmask: a valid requested set of channels
* @reg: supply regulator
+ * @lock lock to ensure state is consistent
* @monitor_on: whether monitor mode is enabled
* @monitor_speed: parameter corresponding to device monitor speed setting
* @mask_high: bitmask for enabled high thresholds
@@ -169,6 +170,7 @@ struct max1363_state {
const struct max1363_mode *current_mode;
u32 requestedmask;
struct regulator *reg;
+ struct mutex lock;
/* Using monitor modes and buffer at the same time is
currently not supported */
@@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
struct max1363_state *st = iio_priv(indio_dev);
struct i2c_client *client = st->client;
- mutex_lock(&indio_dev->mlock);
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+
/*
* If monitor mode is enabled, the method for reading a single
* channel will have to be rather different and has not yet
@@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
*
* Also, cannot read directly if buffered capture enabled.
*/
- if (st->monitor_on || iio_buffer_enabled(indio_dev)) {
+ if (st->monitor_on) {
ret = -EBUSY;
goto error_ret;
}
@@ -404,8 +410,10 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
data = rxbuf[0];
}
*val = data;
+
error_ret:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
return ret;
}
@@ -705,9 +713,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
if (!found)
return -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
st->monitor_speed = i;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return 0;
}
@@ -810,12 +818,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,
int val;
int number = chan->channel;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
if (dir == IIO_EV_DIR_FALLING)
val = (1 << number) & st->mask_low;
else
val = (1 << number) & st->mask_high;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return val;
}
@@ -962,7 +970,11 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
u16 unifiedmask;
int number = chan->channel;
- mutex_lock(&indio_dev->mlock);
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+
unifiedmask = st->mask_low | st->mask_high;
if (dir == IIO_EV_DIR_FALLING) {
@@ -989,7 +1001,8 @@ static int max1363_write_event_config(struct iio_dev *indio_dev,
max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
error_ret:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
return ret;
}
@@ -1587,6 +1600,7 @@ static int max1363_probe(struct i2c_client *client,
st = iio_priv(indio_dev);
+ mutex_init(&st->lock);
st->reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(st->reg)) {
ret = PTR_ERR(st->reg);
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 176e1cb4abb1..0f2c1738a90d 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -496,7 +496,6 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
struct iio_dev *indio_dev)
{
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
- struct resource *mem;
void __iomem *base;
int ret;
@@ -508,8 +507,7 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
indio_dev->channels = sun8i_a33_gpadc_channels;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, mem);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index ec227b358cd6..9897d758cf88 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -3,7 +3,7 @@
* Xilinx XADC driver
*
* Copyright 2013-2014 Analog Devices Inc.
- * Author: Lars-Peter Clauen <lars@metafoo.de>
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
*
* Documentation for the parts can be found at:
* - XADC hardmacro: Xilinx UG480
@@ -653,7 +653,7 @@ static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
mutex_lock(&xadc->mutex);
if (state) {
- /* Only one of the two triggers can be active at the a time. */
+ /* Only one of the two triggers can be active at a time. */
if (xadc->trigger != NULL) {
ret = -EBUSY;
goto err_out;
diff --git a/drivers/iio/adc/xilinx-xadc-events.c b/drivers/iio/adc/xilinx-xadc-events.c
index dbfd5da290a4..2357f585720a 100644
--- a/drivers/iio/adc/xilinx-xadc-events.c
+++ b/drivers/iio/adc/xilinx-xadc-events.c
@@ -3,7 +3,7 @@
* Xilinx XADC driver
*
* Copyright 2013 Analog Devices Inc.
- * Author: Lars-Peter Clauen <lars@metafoo.de>
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
*/
#include <linux/iio/events.h>
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
index 4017f18b0a4f..25abed9c0285 100644
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -3,7 +3,7 @@
* Xilinx XADC driver
*
* Copyright 2013 Analog Devices Inc.
- * Author: Lars-Peter Clauen <lars@metafoo.de>
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
*/
#ifndef __IIO_XILINX_XADC__
diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c
index a74bd9c0587c..d348af8b9705 100644
--- a/drivers/iio/buffer/industrialio-buffer-dma.c
+++ b/drivers/iio/buffer/industrialio-buffer-dma.c
@@ -12,7 +12,6 @@
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/poll.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/buffer_impl.h>
#include <linux/iio/buffer-dma.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index b129693af0fd..6dedf12b69a4 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -134,7 +134,7 @@ static ssize_t iio_dmaengine_buffer_get_length_align(struct device *dev,
struct dmaengine_buffer *dmaengine_buffer =
iio_buffer_to_dmaengine_buffer(indio_dev->buffer);
- return sprintf(buf, "%u\n", dmaengine_buffer->align);
+ return sprintf(buf, "%zu\n", dmaengine_buffer->align);
}
static IIO_DEVICE_ATTR(length_align_bytes, 0444,
@@ -229,6 +229,45 @@ void iio_dmaengine_buffer_free(struct iio_buffer *buffer)
}
EXPORT_SYMBOL_GPL(iio_dmaengine_buffer_free);
+static void __devm_iio_dmaengine_buffer_free(struct device *dev, void *res)
+{
+ iio_dmaengine_buffer_free(*(struct iio_buffer **)res);
+}
+
+/**
+ * devm_iio_dmaengine_buffer_alloc() - Resource-managed iio_dmaengine_buffer_alloc()
+ * @dev: Parent device for the buffer
+ * @channel: DMA channel name, typically "rx".
+ *
+ * This allocates a new IIO buffer which internally uses the DMAengine framework
+ * to perform its transfers. The parent device will be used to request the DMA
+ * channel.
+ *
+ * The buffer will be automatically de-allocated once the device gets destroyed.
+ */
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+ const char *channel)
+{
+ struct iio_buffer **bufferp, *buffer;
+
+ bufferp = devres_alloc(__devm_iio_dmaengine_buffer_free,
+ sizeof(*bufferp), GFP_KERNEL);
+ if (!bufferp)
+ return ERR_PTR(-ENOMEM);
+
+ buffer = iio_dmaengine_buffer_alloc(dev, channel);
+ if (IS_ERR(buffer)) {
+ devres_free(bufferp);
+ return buffer;
+ }
+
+ *bufferp = buffer;
+ devres_add(dev, bufferp);
+
+ return buffer;
+}
+EXPORT_SYMBOL_GPL(devm_iio_dmaengine_buffer_alloc);
+
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("DMA buffer for the IIO framework");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
index 95165697d8ae..f2d27788f666 100644
--- a/drivers/iio/buffer/industrialio-hw-consumer.c
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -142,17 +142,6 @@ static void devm_iio_hw_consumer_release(struct device *dev, void *res)
iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
}
-static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
-{
- struct iio_hw_consumer **r = res;
-
- if (!r || !*r) {
- WARN_ON(!r || !*r);
- return 0;
- }
- return *r == data;
-}
-
/**
* devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
* @dev: Pointer to consumer device.
@@ -160,9 +149,6 @@ static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
* Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
* is automatically freed on driver detach.
*
- * If an iio_hw_consumer allocated with this function needs to be freed
- * separately, devm_iio_hw_consumer_free() must be used.
- *
* returns pointer to allocated iio_hw_consumer on success, NULL on failure.
*/
struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
@@ -187,23 +173,6 @@ struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
/**
- * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
- * @dev: Pointer to consumer device.
- * @hwc: iio_hw_consumer to free.
- *
- * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
- */
-void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_hw_consumer_release,
- devm_iio_hw_consumer_match, hwc);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
-
-/**
* iio_hw_consumer_enable() - Enable IIO hardware consumer
* @hwc: iio_hw_consumer to enable.
*
diff --git a/drivers/iio/buffer/industrialio-triggered-buffer.c b/drivers/iio/buffer/industrialio-triggered-buffer.c
index cb322b2f09cd..e8046c1ecd6b 100644
--- a/drivers/iio/buffer/industrialio-triggered-buffer.c
+++ b/drivers/iio/buffer/industrialio-triggered-buffer.c
@@ -126,17 +126,6 @@ int devm_iio_triggered_buffer_setup(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_iio_triggered_buffer_setup);
-void devm_iio_triggered_buffer_cleanup(struct device *dev,
- struct iio_dev *indio_dev)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_triggered_buffer_clean,
- devm_iio_device_match, indio_dev);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_triggered_buffer_cleanup);
-
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("IIO helper functions for setting up triggered buffers");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/kfifo_buf.c b/drivers/iio/buffer/kfifo_buf.c
index 3150f8ab984b..1359abed3b31 100644
--- a/drivers/iio/buffer/kfifo_buf.c
+++ b/drivers/iio/buffer/kfifo_buf.c
@@ -179,16 +179,6 @@ static void devm_iio_kfifo_release(struct device *dev, void *res)
iio_kfifo_free(*(struct iio_buffer **)res);
}
-static int devm_iio_kfifo_match(struct device *dev, void *res, void *data)
-{
- struct iio_buffer **r = res;
-
- if (WARN_ON(!r || !*r))
- return 0;
-
- return *r == data;
-}
-
/**
* devm_iio_fifo_allocate - Resource-managed iio_kfifo_allocate()
* @dev: Device to allocate kfifo buffer for
@@ -216,16 +206,4 @@ struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev)
}
EXPORT_SYMBOL(devm_iio_kfifo_allocate);
-/**
- * devm_iio_fifo_free - Resource-managed iio_kfifo_free()
- * @dev: Device the buffer belongs to
- * @r: The buffer associated with the device
- */
-void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r)
-{
- WARN_ON(devres_release(dev, devm_iio_kfifo_release,
- devm_iio_kfifo_match, r));
-}
-EXPORT_SYMBOL(devm_iio_kfifo_free);
-
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
index 82d470561ad3..973cdb4f1e83 100644
--- a/drivers/iio/chemical/atlas-sensor.c
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -426,8 +426,7 @@ static irqreturn_t atlas_trigger_handler(int irq, void *private)
int ret;
ret = regmap_bulk_read(data->regmap, data->chip->data_reg,
- (u8 *) &data->buffer,
- sizeof(__be32) * channels);
+ &data->buffer, sizeof(__be32) * channels);
if (!ret)
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
@@ -463,7 +462,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
if (suspended)
msleep(data->chip->delay);
- ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
+ ret = regmap_bulk_read(data->regmap, reg, val, sizeof(*val));
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
@@ -485,7 +484,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_TEMP:
ret = regmap_bulk_read(data->regmap, chan->address,
- (u8 *) &reg, sizeof(reg));
+ &reg, sizeof(reg));
break;
case IIO_PH:
case IIO_CONCENTRATION:
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index ccde4c65ff93..13773e01699b 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -114,14 +114,16 @@ static int bme680_read_calib(struct bme680_data *data,
__le16 buf;
/* Temperature related coefficients */
- ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_T1_LSB_REG\n");
return ret;
}
calib->par_t1 = le16_to_cpu(buf);
- ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_T2_LSB_REG\n");
return ret;
@@ -136,14 +138,16 @@ static int bme680_read_calib(struct bme680_data *data,
calib->par_t3 = tmp;
/* Pressure related coefficients */
- ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P1_LSB_REG\n");
return ret;
}
calib->par_p1 = le16_to_cpu(buf);
- ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P2_LSB_REG\n");
return ret;
@@ -157,14 +161,16 @@ static int bme680_read_calib(struct bme680_data *data,
}
calib->par_p3 = tmp;
- ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P4_LSB_REG\n");
return ret;
}
calib->par_p4 = le16_to_cpu(buf);
- ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P5_LSB_REG\n");
return ret;
@@ -185,14 +191,16 @@ static int bme680_read_calib(struct bme680_data *data,
}
calib->par_p7 = tmp;
- ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P8_LSB_REG\n");
return ret;
}
calib->par_p8 = le16_to_cpu(buf);
- ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG, (u8 *) &buf, 2);
+ ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_P9_LSB_REG\n");
return ret;
@@ -276,8 +284,8 @@ static int bme680_read_calib(struct bme680_data *data,
}
calib->par_gh1 = tmp;
- ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG, (u8 *) &buf,
- 2);
+ ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG,
+ &buf, sizeof(buf));
if (ret < 0) {
dev_err(dev, "failed to read BME680_GH2_LSB_REG\n");
return ret;
@@ -615,7 +623,7 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
return ret;
ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
- (u8 *) &tmp, 3);
+ &tmp, 3);
if (ret < 0) {
dev_err(dev, "failed to read temperature\n");
return ret;
@@ -656,7 +664,7 @@ static int bme680_read_press(struct bme680_data *data,
return ret;
ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
- (u8 *) &tmp, 3);
+ &tmp, 3);
if (ret < 0) {
dev_err(dev, "failed to read pressure\n");
return ret;
@@ -689,7 +697,7 @@ static int bme680_read_humid(struct bme680_data *data,
return ret;
ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB,
- (u8 *) &tmp, 2);
+ &tmp, sizeof(tmp));
if (ret < 0) {
dev_err(dev, "failed to read humidity\n");
return ret;
@@ -754,7 +762,7 @@ static int bme680_read_gas(struct bme680_data *data,
}
ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
- (u8 *) &tmp, 2);
+ &tmp, sizeof(tmp));
if (ret < 0) {
dev_err(dev, "failed to read gas resistance\n");
return ret;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0e35ff06f9af..a0c2cbd60c6f 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -150,8 +150,7 @@ static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
if (err < 0)
goto st_accel_set_fullscale_error;
- sdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &sdata->sensor_settings->fs.fs_avl[i];
+ sdata->current_fullscale = &sdata->sensor_settings->fs.fs_avl[i];
return err;
st_accel_set_fullscale_error:
@@ -278,8 +277,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
!sdata->sensor_settings->drdy_irq.int2.addr) {
if (pdata->drdy_int_pin)
dev_info(&indio_dev->dev,
- "DRDY on pin INT%d specified, but sensor "
- "does not support interrupts\n",
+ "DRDY on pin INT%d specified, but sensor does not support interrupts\n",
pdata->drdy_int_pin);
return 0;
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index 286830fb5d35..b400560bac93 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -49,8 +49,8 @@ int st_sensors_i2c_configure(struct iio_dev *indio_dev,
sdata->regmap = devm_regmap_init_i2c(client, config);
if (IS_ERR(sdata->regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap (%d)\n",
- (int)PTR_ERR(sdata->regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap (%ld)\n",
+ PTR_ERR(sdata->regmap));
return PTR_ERR(sdata->regmap);
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 1275fb0eda31..ee70515bb89f 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -44,7 +44,7 @@ static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
if (device_property_read_bool(dev, "spi-3wire"))
return true;
- pdata = (struct st_sensors_platform_data *)dev->platform_data;
+ pdata = dev_get_platdata(dev);
if (pdata && pdata->spi_3wire)
return true;
@@ -101,8 +101,8 @@ int st_sensors_spi_configure(struct iio_dev *indio_dev,
sdata->regmap = devm_regmap_init_spi(spi, config);
if (IS_ERR(sdata->regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap (%d)\n",
- (int)PTR_ERR(sdata->regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap (%ld)\n",
+ PTR_ERR(sdata->regmap));
return PTR_ERR(sdata->regmap);
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index e817537cdfb5..0507283bd4c1 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -44,8 +44,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
sdata->sensor_settings->drdy_irq.stat_drdy.addr,
&status);
if (ret < 0) {
- dev_err(sdata->dev,
- "error checking samples available\n");
+ dev_err(sdata->dev, "error checking samples available\n");
return ret;
}
@@ -148,9 +147,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
case IRQF_TRIGGER_LOW:
if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
dev_err(&indio_dev->dev,
- "falling/low specified for IRQ "
- "but hardware supports only rising/high: "
- "will request rising/high\n");
+ "falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n");
if (irq_trig == IRQF_TRIGGER_FALLING)
irq_trig = IRQF_TRIGGER_RISING;
if (irq_trig == IRQF_TRIGGER_LOW)
@@ -163,8 +160,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
if (err < 0)
goto iio_trigger_free;
dev_info(&indio_dev->dev,
- "interrupts on the falling edge or "
- "active low level\n");
+ "interrupts on the falling edge or active low level\n");
}
break;
case IRQF_TRIGGER_RISING:
@@ -178,8 +174,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
default:
/* This is the most preferred mode, if possible */
dev_err(&indio_dev->dev,
- "unsupported IRQ trigger specified (%lx), enforce "
- "rising edge\n", irq_trig);
+ "unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig);
irq_trig = IRQF_TRIGGER_RISING;
}
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 7eaf77707b0b..6daeddf37f60 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -61,7 +61,7 @@ config BMG160
help
Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor
driver connected via I2C or SPI. This driver also supports BMI055
- gyroscope.
+ and BMI088 gyroscope.
This driver can also be built as a module. If so, the module
will be called bmg160_i2c or bmg160_spi.
diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
index 4fc9c6a3321f..b3fa46bd02cb 100644
--- a/drivers/iio/gyro/bmg160_i2c.c
+++ b/drivers/iio/gyro/bmg160_i2c.c
@@ -21,8 +21,8 @@ static int bmg160_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
@@ -42,6 +42,7 @@ static int bmg160_i2c_remove(struct i2c_client *client)
static const struct acpi_device_id bmg160_acpi_match[] = {
{"BMG0160", 0},
{"BMI055B", 0},
+ {"BMI088B", 0},
{},
};
@@ -50,6 +51,7 @@ MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
static const struct i2c_device_id bmg160_i2c_id[] = {
{"bmg160", 0},
{"bmi055_gyro", 0},
+ {"bmi088_gyro", 0},
{}
};
diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
index 182a59c42507..745962e1e423 100644
--- a/drivers/iio/gyro/bmg160_spi.c
+++ b/drivers/iio/gyro/bmg160_spi.c
@@ -19,8 +19,8 @@ static int bmg160_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
@@ -37,6 +37,7 @@ static int bmg160_spi_remove(struct spi_device *spi)
static const struct spi_device_id bmg160_spi_id[] = {
{"bmg160", 0},
{"bmi055_gyro", 0},
+ {"bmi088_gyro", 0},
{}
};
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
index afa8018b9238..ef5bcbc4b45b 100644
--- a/drivers/iio/gyro/mpu3050-i2c.c
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -51,8 +51,8 @@ static int mpu3050_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index 7465ad62391c..9c92ff7a82be 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -37,8 +37,7 @@ static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
if (err < 0)
return err;
- err = st_sensors_set_axis_enable(indio_dev,
- (u8)indio_dev->active_scan_mask[0]);
+ err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
if (err < 0)
goto st_gyro_buffer_predisable;
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 26c50b24bc08..c8aa051995d3 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -460,6 +460,7 @@ EXPORT_SYMBOL(st_gyro_get_settings);
int st_gyro_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *gdata = iio_priv(indio_dev);
+ struct st_sensors_platform_data *pdata;
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -477,12 +478,12 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
indio_dev->channels = gdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
- gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &gdata->sensor_settings->fs.fs_avl[0];
+ gdata->current_fullscale = &gdata->sensor_settings->fs.fs_avl[0];
gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev,
- (struct st_sensors_platform_data *)&gyro_pdata);
+ pdata = (struct st_sensors_platform_data *)&gyro_pdata;
+
+ err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
goto st_gyro_power_off;
diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index 84010501762d..546fc37ad75d 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
@@ -267,11 +267,10 @@ static int max30100_get_current_idx(unsigned int val, int *reg)
static int max30100_led_init(struct max30100_data *data)
{
struct device *dev = &data->client->dev;
- struct device_node *np = dev->of_node;
unsigned int val[2];
int reg, ret;
- ret = of_property_read_u32_array(np, "maxim,led-current-microamp",
+ ret = device_property_read_u32_array(dev, "maxim,led-current-microamp",
(unsigned int *) &val, 2);
if (ret) {
/* Default to 24 mA RED LED, 50 mA IR LED */
@@ -502,7 +501,7 @@ MODULE_DEVICE_TABLE(of, max30100_dt_ids);
static struct i2c_driver max30100_driver = {
.driver = {
.name = MAX30100_DRV_NAME,
- .of_match_table = of_match_ptr(max30100_dt_ids),
+ .of_match_table = max30100_dt_ids,
},
.probe = max30100_probe,
.remove = max30100_remove,
diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
index 81d50a861c22..9fb3f33614d4 100644
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -74,10 +74,9 @@ static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
int hts221_allocate_trigger(struct hts221_hw *hw)
{
+ struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
struct iio_dev *iio_dev = iio_priv_to_dev(hw);
bool irq_active_low = false, open_drain = false;
- struct device_node *np = hw->dev->of_node;
- struct st_sensors_platform_data *pdata;
unsigned long irq_type;
int err;
@@ -106,8 +105,7 @@ int hts221_allocate_trigger(struct hts221_hw *hw)
if (err < 0)
return err;
- pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
- if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+ if (device_property_read_bool(hw->dev, "drive-open-drain") ||
(pdata && pdata->open_drain)) {
irq_type |= IRQF_SHARED;
open_drain = true;
diff --git a/drivers/iio/humidity/hts221_i2c.c b/drivers/iio/humidity/hts221_i2c.c
index 4272b7030c44..cab39c4756f8 100644
--- a/drivers/iio/humidity/hts221_i2c.c
+++ b/drivers/iio/humidity/hts221_i2c.c
@@ -32,8 +32,8 @@ static int hts221_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &hts221_i2c_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
@@ -63,7 +63,7 @@ static struct i2c_driver hts221_driver = {
.driver = {
.name = "hts221_i2c",
.pm = &hts221_pm_ops,
- .of_match_table = of_match_ptr(hts221_i2c_of_match),
+ .of_match_table = hts221_i2c_of_match,
.acpi_match_table = ACPI_PTR(hts221_acpi_match),
},
.probe = hts221_i2c_probe,
diff --git a/drivers/iio/humidity/hts221_spi.c b/drivers/iio/humidity/hts221_spi.c
index 055dba8897d2..729e86e433b1 100644
--- a/drivers/iio/humidity/hts221_spi.c
+++ b/drivers/iio/humidity/hts221_spi.c
@@ -31,8 +31,8 @@ static int hts221_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &hts221_spi_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
@@ -56,7 +56,7 @@ static struct spi_driver hts221_driver = {
.driver = {
.name = "hts221_spi",
.pm = &hts221_pm_ops,
- .of_match_table = of_match_ptr(hts221_spi_of_match),
+ .of_match_table = hts221_spi_of_match,
},
.probe = hts221_spi_probe,
.id_table = hts221_spi_id_table,
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index a8afd01de4f3..2e7d0d337f8f 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -419,7 +419,7 @@ int __adis_initial_startup(struct adis *adis)
if (prod_id != adis->data->prod_id)
dev_warn(&adis->spi->dev,
- "Device ID(%u) and product ID(%u) do not match.",
+ "Device ID(%u) and product ID(%u) do not match.\n",
adis->data->prod_id, prod_id);
return 0;
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index 05e70c1c4835..4445c242709c 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -258,7 +258,7 @@ static int adis16400_show_product_id(void *arg, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(adis16400_product_id_fops,
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_product_id_fops,
adis16400_show_product_id, NULL, "%lld\n");
static int adis16400_show_flash_count(void *arg, u64 *val)
@@ -275,7 +275,7 @@ static int adis16400_show_flash_count(void *arg, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(adis16400_flash_count_fops,
+DEFINE_DEBUGFS_ATTRIBUTE(adis16400_flash_count_fops,
adis16400_show_flash_count, NULL, "%lld\n");
static int adis16400_debugfs_init(struct iio_dev *indio_dev)
@@ -283,15 +283,16 @@ static int adis16400_debugfs_init(struct iio_dev *indio_dev)
struct adis16400_state *st = iio_priv(indio_dev);
if (st->variant->flags & ADIS16400_HAS_SERIAL_NUMBER)
- debugfs_create_file("serial_number", 0400,
- indio_dev->debugfs_dentry, st,
- &adis16400_serial_number_fops);
+ debugfs_create_file_unsafe("serial_number", 0400,
+ indio_dev->debugfs_dentry, st,
+ &adis16400_serial_number_fops);
if (st->variant->flags & ADIS16400_HAS_PROD_ID)
- debugfs_create_file("product_id", 0400,
+ debugfs_create_file_unsafe("product_id", 0400,
+ indio_dev->debugfs_dentry, st,
+ &adis16400_product_id_fops);
+ debugfs_create_file_unsafe("flash_count", 0400,
indio_dev->debugfs_dentry, st,
- &adis16400_product_id_fops);
- debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
- st, &adis16400_flash_count_fops);
+ &adis16400_flash_count_fops);
return 0;
}
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
index 0027683d0256..0957f5cfe9c0 100644
--- a/drivers/iio/imu/adis16460.c
+++ b/drivers/iio/imu/adis16460.c
@@ -87,8 +87,8 @@ static int adis16460_show_serial_number(void *arg, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_serial_number_fops,
- adis16460_show_serial_number, NULL, "0x%.4llx\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_serial_number_fops,
+ adis16460_show_serial_number, NULL, "0x%.4llx\n");
static int adis16460_show_product_id(void *arg, u64 *val)
{
@@ -105,8 +105,8 @@ static int adis16460_show_product_id(void *arg, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_product_id_fops,
- adis16460_show_product_id, NULL, "%llu\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_product_id_fops,
+ adis16460_show_product_id, NULL, "%llu\n");
static int adis16460_show_flash_count(void *arg, u64 *val)
{
@@ -123,19 +123,22 @@ static int adis16460_show_flash_count(void *arg, u64 *val)
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(adis16460_flash_count_fops,
- adis16460_show_flash_count, NULL, "%lld\n");
+DEFINE_DEBUGFS_ATTRIBUTE(adis16460_flash_count_fops,
+ adis16460_show_flash_count, NULL, "%lld\n");
static int adis16460_debugfs_init(struct iio_dev *indio_dev)
{
struct adis16460 *adis16460 = iio_priv(indio_dev);
- debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry,
- adis16460, &adis16460_serial_number_fops);
- debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry,
- adis16460, &adis16460_product_id_fops);
- debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
- adis16460, &adis16460_flash_count_fops);
+ debugfs_create_file_unsafe("serial_number", 0400,
+ indio_dev->debugfs_dentry, adis16460,
+ &adis16460_serial_number_fops);
+ debugfs_create_file_unsafe("product_id", 0400,
+ indio_dev->debugfs_dentry, adis16460,
+ &adis16460_product_id_fops);
+ debugfs_create_file_unsafe("flash_count", 0400,
+ indio_dev->debugfs_dentry, adis16460,
+ &adis16460_flash_count_fops);
return 0;
}
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
index e36f5e82d400..26398614eddf 100644
--- a/drivers/iio/imu/bmi160/bmi160_i2c.c
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -24,8 +24,8 @@ static int bmi160_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
index c19e3df35559..61389b41c6d9 100644
--- a/drivers/iio/imu/bmi160/bmi160_spi.c
+++ b/drivers/iio/imu/bmi160/bmi160_spi.c
@@ -20,8 +20,8 @@ static int bmi160_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
return bmi160_core_probe(&spi->dev, regmap, id->name, true);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 2f8560ba4572..c27d06035c8b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -135,6 +135,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
st->mux_client = NULL;
if (ACPI_HANDLE(&client->dev)) {
struct i2c_board_info info;
+ struct i2c_client *mux_client;
struct acpi_device *adev;
int ret = -1;
@@ -172,9 +173,10 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
} else
return 0; /* no secondary addr, which is OK */
}
- st->mux_client = i2c_new_device(st->muxc->adapter[0], &info);
- if (!st->mux_client)
- return -ENODEV;
+ mux_client = i2c_new_client_device(st->muxc->adapter[0], &info);
+ if (IS_ERR(mux_client))
+ return PTR_ERR(mux_client);
+ st->mux_client = mux_client;
}
return 0;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 7cb9ff3d3e94..d3819b516ec6 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -526,7 +526,7 @@ static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg,
__be16 d = cpu_to_be16(val);
ind = (axis - IIO_MOD_X) * 2;
- result = regmap_bulk_write(st->map, reg + ind, (u8 *)&d, 2);
+ result = regmap_bulk_write(st->map, reg + ind, &d, sizeof(d));
if (result)
return -EINVAL;
@@ -540,7 +540,7 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
__be16 d;
ind = (axis - IIO_MOD_X) * 2;
- result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2);
+ result = regmap_bulk_read(st->map, reg + ind, &d, sizeof(d));
if (result)
return -EINVAL;
*val = (short)be16_to_cpup(&d);
@@ -1248,12 +1248,31 @@ static const struct attribute_group inv_attribute_group = {
.attrs = inv_attributes
};
+static int inv_mpu6050_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int writeval,
+ unsigned int *readval)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ if (readval)
+ ret = regmap_read(st->map, reg, readval);
+ else
+ ret = regmap_write(st->map, reg, writeval);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
static const struct iio_info mpu_info = {
.read_raw = &inv_mpu6050_read_raw,
.write_raw = &inv_mpu6050_write_raw,
.write_raw_get_fmt = &inv_write_raw_get_fmt,
.attrs = &inv_attribute_group,
.validate_trigger = inv_mpu6050_validate_trigger,
+ .debugfs_reg_access = &inv_mpu6050_reg_access,
};
/**
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 6993d3b87bb0..28cfae1e61cf 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -122,8 +122,8 @@ static int inv_mpu_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 673b198e6368..6f968ce687e1 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -53,8 +53,8 @@ static int inv_mpu_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index f2113a63721a..38b613072da2 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -111,7 +111,7 @@ struct st_lsm6dsx_odr {
u8 val;
};
-#define ST_LSM6DSX_ODR_LIST_SIZE 6
+#define ST_LSM6DSX_ODR_LIST_SIZE 8
struct st_lsm6dsx_odr_table_entry {
struct st_lsm6dsx_reg reg;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 95ddd19d1aa7..947ca3a7dcaf 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -88,6 +88,69 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
.len = 6,
},
},
+ /* LIS3MDL */
+ {
+ .i2c_addr = { 0x1e },
+ .wai = {
+ .addr = 0x0f,
+ .val = 0x3d,
+ },
+ .id = ST_LSM6DSX_ID_MAGN,
+ .odr_table = {
+ .reg = {
+ .addr = 0x20,
+ .mask = GENMASK(4, 2),
+ },
+ .odr_avl[0] = { 1000, 0x0 },
+ .odr_avl[1] = { 2000, 0x1 },
+ .odr_avl[2] = { 3000, 0x2 },
+ .odr_avl[3] = { 5000, 0x3 },
+ .odr_avl[4] = { 10000, 0x4 },
+ .odr_avl[5] = { 20000, 0x5 },
+ .odr_avl[6] = { 40000, 0x6 },
+ .odr_avl[7] = { 80000, 0x7 },
+ .odr_len = 8,
+ },
+ .fs_table = {
+ .reg = {
+ .addr = 0x21,
+ .mask = GENMASK(6, 5),
+ },
+ .fs_avl[0] = {
+ .gain = 146,
+ .val = 0x00,
+ }, /* 4000 uG/LSB */
+ .fs_avl[1] = {
+ .gain = 292,
+ .val = 0x01,
+ }, /* 8000 uG/LSB */
+ .fs_avl[2] = {
+ .gain = 438,
+ .val = 0x02,
+ }, /* 12000 uG/LSB */
+ .fs_avl[3] = {
+ .gain = 584,
+ .val = 0x03,
+ }, /* 16000 uG/LSB */
+ .fs_len = 4,
+ },
+ .pwr_table = {
+ .reg = {
+ .addr = 0x22,
+ .mask = GENMASK(1, 0),
+ },
+ .off_val = 0x2,
+ .on_val = 0x0,
+ },
+ .bdu = {
+ .addr = 0x24,
+ .mask = BIT(6),
+ },
+ .out = {
+ .addr = 0x28,
+ .len = 6,
+ },
+ },
};
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
@@ -518,6 +581,36 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
}
static int
+st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
+ u32 gain)
+{
+ const struct st_lsm6dsx_fs_table_entry *fs_table;
+ int i, err;
+
+ fs_table = &sensor->ext_info.settings->fs_table;
+ if (!fs_table->reg.addr)
+ return -ENOTSUPP;
+
+ for (i = 0; i < fs_table->fs_len; i++) {
+ if (fs_table->fs_avl[i].gain == gain)
+ break;
+ }
+
+ if (i == fs_table->fs_len)
+ return -EINVAL;
+
+ err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
+ fs_table->reg.mask,
+ fs_table->fs_avl[i].val);
+ if (err < 0)
+ return err;
+
+ sensor->gain = gain;
+
+ return 0;
+}
+
+static int
st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
@@ -539,6 +632,9 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
sensor->odr = val;
break;
}
+ case IIO_CHAN_INFO_SCALE:
+ err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
+ break;
default:
err = -EINVAL;
break;
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 4ada5592aa2b..221157136af6 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -316,8 +316,7 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev,
const unsigned long *mask;
unsigned long *trialmask;
- trialmask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
- sizeof(*trialmask), GFP_KERNEL);
+ trialmask = bitmap_zalloc(indio_dev->masklength, GFP_KERNEL);
if (trialmask == NULL)
return -ENOMEM;
if (!indio_dev->masklength) {
@@ -687,6 +686,13 @@ static int iio_verify_update(struct iio_dev *indio_dev,
bool scan_timestamp;
unsigned int modes;
+ if (insert_buffer &&
+ bitmap_empty(insert_buffer->scan_mask, indio_dev->masklength)) {
+ dev_dbg(&indio_dev->dev,
+ "At least one scan element must be enabled first\n");
+ return -EINVAL;
+ }
+
memset(config, 0, sizeof(*config));
config->watermark = ~0;
@@ -1277,11 +1283,6 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
indio_dev->groups[indio_dev->groupcounter++] = &buffer->buffer_group;
- if (buffer->scan_el_attrs != NULL) {
- attr = buffer->scan_el_attrs->attrs;
- while (*attr++ != NULL)
- attrcount_orig++;
- }
attrcount = attrcount_orig;
INIT_LIST_HEAD(&buffer->scan_el_dev_attr_list);
channels = indio_dev->channels;
@@ -1319,9 +1320,6 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
ret = -ENOMEM;
goto error_free_scan_mask;
}
- if (buffer->scan_el_attrs)
- memcpy(buffer->scan_el_group.attrs, buffer->scan_el_attrs,
- sizeof(buffer->scan_el_group.attrs[0])*attrcount_orig);
attrn = attrcount_orig;
list_for_each_entry(p, &buffer->scan_el_dev_attr_list, l)
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 2352c426bfb5..6add449b38bc 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -572,46 +572,46 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
switch (type) {
case IIO_VAL_INT:
- return snprintf(buf, len, "%d", vals[0]);
+ return scnprintf(buf, len, "%d", vals[0]);
case IIO_VAL_INT_PLUS_MICRO_DB:
scale_db = true;
/* fall through */
case IIO_VAL_INT_PLUS_MICRO:
if (vals[1] < 0)
- return snprintf(buf, len, "-%d.%06u%s", abs(vals[0]),
+ return scnprintf(buf, len, "-%d.%06u%s", abs(vals[0]),
-vals[1], scale_db ? " dB" : "");
else
- return snprintf(buf, len, "%d.%06u%s", vals[0], vals[1],
+ return scnprintf(buf, len, "%d.%06u%s", vals[0], vals[1],
scale_db ? " dB" : "");
case IIO_VAL_INT_PLUS_NANO:
if (vals[1] < 0)
- return snprintf(buf, len, "-%d.%09u", abs(vals[0]),
+ return scnprintf(buf, len, "-%d.%09u", abs(vals[0]),
-vals[1]);
else
- return snprintf(buf, len, "%d.%09u", vals[0], vals[1]);
+ return scnprintf(buf, len, "%d.%09u", vals[0], vals[1]);
case IIO_VAL_FRACTIONAL:
tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
tmp1 = vals[1];
tmp0 = (int)div_s64_rem(tmp, 1000000000, &tmp1);
- return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
+ return scnprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
case IIO_VAL_FRACTIONAL_LOG2:
tmp = shift_right((s64)vals[0] * 1000000000LL, vals[1]);
tmp0 = (int)div_s64_rem(tmp, 1000000000LL, &tmp1);
- return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
+ return scnprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
case IIO_VAL_INT_MULTIPLE:
{
int i;
int l = 0;
for (i = 0; i < size; ++i) {
- l += snprintf(&buf[l], len - l, "%d ", vals[i]);
+ l += scnprintf(&buf[l], len - l, "%d ", vals[i]);
if (l >= len)
break;
}
return l;
}
case IIO_VAL_CHAR:
- return snprintf(buf, len, "%c", (char)vals[0]);
+ return scnprintf(buf, len, "%c", (char)vals[0]);
default:
return 0;
}
@@ -682,10 +682,10 @@ static ssize_t iio_format_avail_list(char *buf, const int *vals,
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < length - 1)
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
" ");
else
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
"\n");
if (len >= PAGE_SIZE)
return -EFBIG;
@@ -698,10 +698,10 @@ static ssize_t iio_format_avail_list(char *buf, const int *vals,
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < length / 2 - 1)
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
" ");
else
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
"\n");
if (len >= PAGE_SIZE)
return -EFBIG;
@@ -725,10 +725,10 @@ static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < 2)
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
" ");
else
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
"]\n");
if (len >= PAGE_SIZE)
return -EFBIG;
@@ -741,10 +741,10 @@ static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < 2)
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
" ");
else
- len += snprintf(buf + len, PAGE_SIZE - len,
+ len += scnprintf(buf + len, PAGE_SIZE - len,
"]\n");
if (len >= PAGE_SIZE)
return -EFBIG;
@@ -1552,17 +1552,6 @@ static void devm_iio_device_release(struct device *dev, void *res)
iio_device_free(*(struct iio_dev **)res);
}
-int devm_iio_device_match(struct device *dev, void *res, void *data)
-{
- struct iio_dev **r = res;
- if (!r || !*r) {
- WARN_ON(!r || !*r);
- return 0;
- }
- return *r == data;
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_match);
-
/**
* devm_iio_device_alloc - Resource-managed iio_device_alloc()
* @dev: Device to allocate iio_dev for
@@ -1571,9 +1560,6 @@ EXPORT_SYMBOL_GPL(devm_iio_device_match);
* Managed iio_device_alloc. iio_dev allocated with this function is
* automatically freed on driver detach.
*
- * If an iio_dev allocated with this function needs to be freed separately,
- * devm_iio_device_free() must be used.
- *
* RETURNS:
* Pointer to allocated iio_dev on success, NULL on failure.
*/
@@ -1599,23 +1585,6 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv)
EXPORT_SYMBOL_GPL(devm_iio_device_alloc);
/**
- * devm_iio_device_free - Resource-managed iio_device_free()
- * @dev: Device this iio_dev belongs to
- * @iio_dev: the iio_dev associated with the device
- *
- * Free iio_dev allocated with devm_iio_device_alloc().
- */
-void devm_iio_device_free(struct device *dev, struct iio_dev *iio_dev)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_device_release,
- devm_iio_device_match, iio_dev);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_free);
-
-/**
* iio_chrdev_open() - chrdev file open for buffer access and ioctls
* @inode: Inode structure for identifying the device in the file system
* @filp: File structure for iio device used to keep and later access
@@ -1717,6 +1686,9 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
{
int ret;
+ if (!indio_dev->info)
+ return -EINVAL;
+
indio_dev->driver_module = this_mod;
/* If the calling driver did not initialize of_node, do it here */
if (!indio_dev->dev.of_node && indio_dev->dev.parent)
@@ -1729,9 +1701,6 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
if (ret < 0)
return ret;
- if (!indio_dev->info)
- return -EINVAL;
-
/* configure elements for the chrdev */
indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
@@ -1837,23 +1806,6 @@ int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
EXPORT_SYMBOL_GPL(__devm_iio_device_register);
/**
- * devm_iio_device_unregister - Resource-managed iio_device_unregister()
- * @dev: Device this iio_dev belongs to
- * @indio_dev: the iio_dev associated with the device
- *
- * Unregister iio_dev registered with devm_iio_device_register().
- */
-void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_device_unreg,
- devm_iio_device_match, indio_dev);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_device_unregister);
-
-/**
* iio_device_claim_direct_mode - Keep device in direct mode
* @indio_dev: the iio_dev associated with the device
*
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 3908a9a90035..53d1931f6be8 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -585,18 +585,6 @@ static void devm_iio_trigger_release(struct device *dev, void *res)
iio_trigger_free(*(struct iio_trigger **)res);
}
-static int devm_iio_trigger_match(struct device *dev, void *res, void *data)
-{
- struct iio_trigger **r = res;
-
- if (!r || !*r) {
- WARN_ON(!r || !*r);
- return 0;
- }
-
- return *r == data;
-}
-
/**
* devm_iio_trigger_alloc - Resource-managed iio_trigger_alloc()
* @dev: Device to allocate iio_trigger for
@@ -608,9 +596,6 @@ static int devm_iio_trigger_match(struct device *dev, void *res, void *data)
* Managed iio_trigger_alloc. iio_trigger allocated with this function is
* automatically freed on driver detach.
*
- * If an iio_trigger allocated with this function needs to be freed separately,
- * devm_iio_trigger_free() must be used.
- *
* RETURNS:
* Pointer to allocated iio_trigger on success, NULL on failure.
*/
@@ -640,23 +625,6 @@ struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_iio_trigger_alloc);
-/**
- * devm_iio_trigger_free - Resource-managed iio_trigger_free()
- * @dev: Device this iio_dev belongs to
- * @iio_trig: the iio_trigger associated with the device
- *
- * Free iio_trigger allocated with devm_iio_trigger_alloc().
- */
-void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_trigger_release,
- devm_iio_trigger_match, iio_trig);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_trigger_free);
-
static void devm_iio_trigger_unreg(struct device *dev, void *res)
{
iio_trigger_unregister(*(struct iio_trigger **)res);
@@ -673,9 +641,6 @@ static void devm_iio_trigger_unreg(struct device *dev, void *res)
* calls iio_trigger_register() internally. Refer to that function for more
* information.
*
- * If an iio_trigger registered with this function needs to be unregistered
- * separately, devm_iio_trigger_unregister() must be used.
- *
* RETURNS:
* 0 on success, negative error number on failure.
*/
@@ -701,24 +666,6 @@ int __devm_iio_trigger_register(struct device *dev,
}
EXPORT_SYMBOL_GPL(__devm_iio_trigger_register);
-/**
- * devm_iio_trigger_unregister - Resource-managed iio_trigger_unregister()
- * @dev: device this iio_trigger belongs to
- * @trig_info: the trigger associated with the device
- *
- * Unregister trigger registered with devm_iio_trigger_register().
- */
-void devm_iio_trigger_unregister(struct device *dev,
- struct iio_trigger *trig_info)
-{
- int rc;
-
- rc = devres_release(dev, devm_iio_trigger_unreg, devm_iio_trigger_match,
- trig_info);
- WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_iio_trigger_unregister);
-
bool iio_trigger_using_own(struct iio_dev *indio_dev)
{
return indio_dev->trig->attached_own_device;
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 5a8351c9a426..ede99e0d5371 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -360,18 +360,6 @@ static void devm_iio_channel_free(struct device *dev, void *res)
iio_channel_release(channel);
}
-static int devm_iio_channel_match(struct device *dev, void *res, void *data)
-{
- struct iio_channel **r = res;
-
- if (!r || !*r) {
- WARN_ON(!r || !*r);
- return 0;
- }
-
- return *r == data;
-}
-
struct iio_channel *devm_iio_channel_get(struct device *dev,
const char *channel_name)
{
@@ -394,13 +382,6 @@ struct iio_channel *devm_iio_channel_get(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_iio_channel_get);
-void devm_iio_channel_release(struct device *dev, struct iio_channel *channel)
-{
- WARN_ON(devres_release(dev, devm_iio_channel_free,
- devm_iio_channel_match, channel));
-}
-EXPORT_SYMBOL_GPL(devm_iio_channel_release);
-
struct iio_channel *iio_channel_get_all(struct device *dev)
{
const char *name;
@@ -514,14 +495,6 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev)
}
EXPORT_SYMBOL_GPL(devm_iio_channel_get_all);
-void devm_iio_channel_release_all(struct device *dev,
- struct iio_channel *channels)
-{
- WARN_ON(devres_release(dev, devm_iio_channel_free_all,
- devm_iio_channel_match, channels));
-}
-EXPORT_SYMBOL_GPL(devm_iio_channel_release_all);
-
static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
enum iio_chan_info_enum info)
{
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
index e37894f0ae0b..95611f5eff01 100644
--- a/drivers/iio/light/isl29125.c
+++ b/drivers/iio/light/isl29125.c
@@ -213,13 +213,24 @@ static const struct iio_info isl29125_info = {
.attrs = &isl29125_attribute_group,
};
-static int isl29125_buffer_preenable(struct iio_dev *indio_dev)
+static int isl29125_buffer_postenable(struct iio_dev *indio_dev)
{
struct isl29125_data *data = iio_priv(indio_dev);
+ int err;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err)
+ return err;
data->conf1 |= ISL29125_MODE_RGB;
- return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+ err = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
data->conf1);
+ if (err) {
+ iio_triggered_buffer_predisable(indio_dev);
+ return err;
+ }
+
+ return 0;
}
static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
@@ -227,19 +238,18 @@ static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
struct isl29125_data *data = iio_priv(indio_dev);
int ret;
- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret < 0)
- return ret;
-
data->conf1 &= ~ISL29125_MODE_MASK;
data->conf1 |= ISL29125_MODE_PD;
- return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+ ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
data->conf1);
+
+ iio_triggered_buffer_predisable(indio_dev);
+
+ return ret;
}
static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = {
- .preenable = isl29125_buffer_preenable,
- .postenable = &iio_triggered_buffer_postenable,
+ .postenable = isl29125_buffer_postenable,
.predisable = isl29125_buffer_predisable,
};
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index 71f99d2a22c1..0626927251bb 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1263,7 +1263,7 @@ static irqreturn_t ltr501_trigger_handler(int irq, void *p)
if (mask & LTR501_STATUS_ALS_RDY) {
ret = regmap_bulk_read(data->regmap, LTR501_ALS_DATA1,
- (u8 *)als_buf, sizeof(als_buf));
+ als_buf, sizeof(als_buf));
if (ret < 0)
return ret;
if (test_bit(0, indio_dev->active_scan_mask))
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index 4889bbeb0c73..400724069d19 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -31,8 +31,8 @@ static int st_uvis25_i2c_probe(struct i2c_client *client,
regmap = devm_regmap_init_i2c(client, &st_uvis25_i2c_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&client->dev, "Failed to register i2c regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c
index a9ceae4f58b3..cd3761a3ee3f 100644
--- a/drivers/iio/light/st_uvis25_spi.c
+++ b/drivers/iio/light/st_uvis25_spi.c
@@ -31,8 +31,8 @@ static int st_uvis25_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &st_uvis25_spi_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap %ld\n",
+ PTR_ERR(regmap));
return PTR_ERR(regmap);
}
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index d8c40a83097d..27a5c28aac7f 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -69,7 +69,7 @@
#define TSL2563_TIMING_GAIN16 0x10
#define TSL2563_TIMING_GAIN1 0x00
-#define TSL2563_INT_DISBLED 0x00
+#define TSL2563_INT_DISABLED 0x00
#define TSL2563_INT_LEVEL 0x10
#define TSL2563_INT_PERSIST(n) ((n) & 0x0F)
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index be37fcbd4654..9fbde9b71b63 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -932,7 +932,7 @@ static ssize_t in_illuminance0_target_input_show(struct device *dev,
{
struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
- return snprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
+ return scnprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
}
static ssize_t in_illuminance0_target_input_store(struct device *dev,
@@ -986,7 +986,7 @@ static ssize_t in_illuminance0_lux_table_show(struct device *dev,
int offset = 0;
while (i < TSL2772_MAX_LUX_TABLE_SIZE) {
- offset += snprintf(buf + offset, PAGE_SIZE, "%u,%u,",
+ offset += scnprintf(buf + offset, PAGE_SIZE - offset, "%u,%u,",
chip->tsl2772_device_lux[i].ch0,
chip->tsl2772_device_lux[i].ch1);
if (chip->tsl2772_device_lux[i].ch0 == 0) {
@@ -1000,7 +1000,7 @@ static ssize_t in_illuminance0_lux_table_show(struct device *dev,
i++;
}
- offset += snprintf(buf + offset, PAGE_SIZE, "\n");
+ offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n");
return offset;
}
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index ec803c1e81df..985cc39ede8e 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -83,6 +83,7 @@ struct vcnl4000_data {
struct mutex vcnl4000_lock;
struct vcnl4200_channel vcnl4200_al;
struct vcnl4200_channel vcnl4200_ps;
+ uint32_t near_level;
};
struct vcnl4000_chip_spec {
@@ -343,6 +344,25 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
},
};
+static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
+ uintptr_t priv,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ return sprintf(buf, "%u\n", data->near_level);
+}
+
+static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
+ {
+ .name = "nearlevel",
+ .shared = IIO_SEPARATE,
+ .read = vcnl4000_read_near_level,
+ },
+ { /* sentinel */ }
+};
+
static const struct iio_chan_spec vcnl4000_channels[] = {
{
.type = IIO_LIGHT,
@@ -351,6 +371,7 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
}, {
.type = IIO_PROXIMITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .ext_info = vcnl4000_ext_info,
}
};
@@ -440,6 +461,10 @@ static int vcnl4000_probe(struct i2c_client *client,
dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
data->chip_spec->prod, data->rev);
+ if (device_property_read_u32(&client->dev, "proximity-near-level",
+ &data->near_level))
+ data->near_level = 0;
+
indio_dev->dev.parent = &client->dev;
indio_dev->info = &vcnl4000_info;
indio_dev->channels = vcnl4000_channels;
diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
index d32996702110..372c80c25dd4 100644
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -746,7 +746,12 @@ static int ak8974_probe(struct i2c_client *i2c,
ARRAY_SIZE(ak8974->regs),
ak8974->regs);
if (ret < 0) {
- dev_err(&i2c->dev, "cannot get regulators\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(&i2c->dev, "cannot get regulators: %d\n", ret);
+ else
+ dev_dbg(&i2c->dev,
+ "regulators unavailable, deferring probe\n");
+
return ret;
}
diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
index ed9be0490d77..c6ed3ea8460a 100644
--- a/drivers/iio/magnetometer/bmc150_magn_spi.c
+++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
@@ -22,8 +22,8 @@ static int bmc150_magn_spi_probe(struct spi_device *spi)
regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name);
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 425cdd07b4e5..1787d656d009 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -239,7 +239,7 @@ static int mmc35240_init(struct mmc35240_data *data)
return ret;
ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR,
- (u8 *)otp_data, sizeof(otp_data));
+ otp_data, sizeof(otp_data));
if (ret < 0)
return ret;
@@ -295,7 +295,7 @@ static int mmc35240_read_measurement(struct mmc35240_data *data, __le16 buf[3])
if (ret < 0)
return ret;
- return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, (u8 *)buf,
+ return regmap_bulk_read(data->regmap, MMC35240_REG_XOUT_L, buf,
3 * sizeof(__le16));
}
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index e68184a93a6d..79de721e6015 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -506,8 +506,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
indio_dev->channels = mdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
- mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &mdata->sensor_settings->fs.fs_avl[0];
+ mdata->current_fullscale = &mdata->sensor_settings->fs.fs_avl[0];
mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
err = st_sensors_init_sensor(indio_dev, NULL);
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 29c209cc1108..a33048390118 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -337,8 +337,7 @@ static int bmp280_read_temp(struct bmp280_data *data,
__be32 tmp = 0;
s32 adc_temp, comp_temp;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
- (u8 *) &tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3);
if (ret < 0) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
@@ -377,8 +376,7 @@ static int bmp280_read_press(struct bmp280_data *data,
if (ret < 0)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
- (u8 *) &tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3);
if (ret < 0) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
@@ -400,8 +398,8 @@ static int bmp280_read_press(struct bmp280_data *data,
static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
{
+ __be16 tmp;
int ret;
- __be16 tmp = 0;
s32 adc_humidity;
u32 comp_humidity;
@@ -410,8 +408,7 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
if (ret < 0)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB,
- (u8 *) &tmp, 2);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2);
if (ret < 0) {
dev_err(data->dev, "failed to read humidity\n");
return ret;
@@ -575,57 +572,38 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
return ret;
}
-static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n)
+static int bmp280_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
{
- size_t len = 0;
- int i;
-
- for (i = 0; i < n; i++)
- len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]);
-
- buf[len - 1] = '\n';
-
- return len;
-}
-
-static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
-
- return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail,
- data->chip_info->num_oversampling_temp_avail);
-}
-
-static ssize_t bmp280_show_press_oversampling_avail(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+ struct bmp280_data *data = iio_priv(indio_dev);
- return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail,
- data->chip_info->num_oversampling_press_avail);
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ *vals = data->chip_info->oversampling_press_avail;
+ *length = data->chip_info->num_oversampling_press_avail;
+ break;
+ case IIO_TEMP:
+ *vals = data->chip_info->oversampling_temp_avail;
+ *length = data->chip_info->num_oversampling_temp_avail;
+ break;
+ default:
+ return -EINVAL;
+ }
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
}
-static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available,
- S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0);
-
-static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available,
- S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0);
-
-static struct attribute *bmp280_attributes[] = {
- &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr,
- &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group bmp280_attrs_group = {
- .attrs = bmp280_attributes,
-};
-
static const struct iio_info bmp280_info = {
.read_raw = &bmp280_read_raw,
+ .read_avail = &bmp280_read_avail,
.write_raw = &bmp280_write_raw,
- .attrs = &bmp280_attrs_group,
};
static int bmp280_chip_config(struct bmp280_data *data)
@@ -713,7 +691,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
unsigned int ctrl;
if (data->use_eoc)
- init_completion(&data->done);
+ reinit_completion(&data->done);
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
if (ret)
@@ -752,14 +730,14 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
{
+ __be16 tmp;
int ret;
- __be16 tmp = 0;
ret = bmp180_measure(data, BMP180_MEAS_TEMP);
if (ret)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2);
if (ret)
return ret;
@@ -856,7 +834,7 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
if (ret)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3);
if (ret)
return ret;
@@ -965,10 +943,12 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
if (irq_trig != IRQF_TRIGGER_RISING) {
- dev_err(dev, "non-rising trigger given for EOC interrupt, "
- "trying to enforce it\n");
+ dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n");
irq_trig = IRQF_TRIGGER_RISING;
}
+
+ init_completion(&data->done);
+
ret = devm_request_threaded_irq(dev,
irq,
bmp085_eoc_irq,
@@ -1082,9 +1062,9 @@ int bmp280_common_probe(struct device *dev,
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Bring chip out of reset if there is an assigned GPIO line */
- gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
/* Deassert the signal */
- if (!IS_ERR(gpiod)) {
+ if (gpiod) {
dev_info(dev, "release reset\n");
gpiod_set_value(gpiod, 0);
}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index bd972cec4830..789a2928504a 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -683,8 +683,7 @@ EXPORT_SYMBOL(st_press_get_settings);
int st_press_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *press_data = iio_priv(indio_dev);
- struct st_sensors_platform_data *pdata =
- (struct st_sensors_platform_data *)press_data->dev->platform_data;
+ struct st_sensors_platform_data *pdata = dev_get_platdata(press_data->dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -708,9 +707,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
indio_dev->channels = press_data->sensor_settings->ch;
indio_dev->num_channels = press_data->sensor_settings->num_ch;
- press_data->current_fullscale =
- (struct st_sensor_fullscale_avl *)
- &press_data->sensor_settings->fs.fs_avl[0];
+ press_data->current_fullscale = &press_data->sensor_settings->fs.fs_avl[0];
press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index 37606d400805..d57e8cc17e42 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -101,6 +101,19 @@ config SRF04
To compile this driver as a module, choose M here: the
module will be called srf04.
+config SX9310
+ tristate "SX9310/SX9311 Semtech proximity sensor"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
+ proximity/button sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sx9310.
+
config SX9500
tristate "SX9500 Semtech proximity sensor"
select IIO_BUFFER
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index c591b019304e..25e5a04da101 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PING) += ping.o
obj-$(CONFIG_RFD77402) += rfd77402.o
obj-$(CONFIG_SRF04) += srf04.o
obj-$(CONFIG_SRF08) += srf08.o
+obj-$(CONFIG_SX9310) += sx9310.o
obj-$(CONFIG_SX9500) += sx9500.o
obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
new file mode 100644
index 000000000000..d161f3061e35
--- /dev/null
+++ b/drivers/iio/proximity/sx9310.c
@@ -0,0 +1,1069 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 Google LLC.
+ *
+ * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
+ * Based on SX9500 driver and Semtech driver using the input framework
+ * <https://my.syncplicity.com/share/teouwsim8niiaud/
+ * linux-driver-SX9310_NoSmartHSensing>.
+ * Reworked April 2019 by Evan Green <evgreen@chromium.org>
+ * and January 2020 by Daniel Campello <campello@chromium.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+/* Register definitions. */
+#define SX9310_REG_IRQ_SRC 0x00
+#define SX9310_REG_STAT0 0x01
+#define SX9310_REG_STAT1 0x02
+#define SX9310_REG_IRQ_MSK 0x03
+#define SX9310_CONVDONE_IRQ BIT(3)
+#define SX9310_FAR_IRQ BIT(5)
+#define SX9310_CLOSE_IRQ BIT(6)
+#define SX9310_EVENT_IRQ (SX9310_FAR_IRQ | \
+ SX9310_CLOSE_IRQ)
+#define SX9310_REG_IRQ_FUNC 0x04
+
+#define SX9310_REG_PROX_CTRL0 0x10
+#define SX9310_REG_PROX_CTRL0_PROXSTAT2 0x10
+#define SX9310_REG_PROX_CTRL0_EN_MASK 0x0F
+#define SX9310_REG_PROX_CTRL1 0x11
+#define SX9310_REG_PROX_CTRL2 0x12
+#define SX9310_REG_PROX_CTRL2_COMBMODE_ALL 0x80
+#define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC 0x04
+#define SX9310_REG_PROX_CTRL3 0x13
+#define SX9310_REG_PROX_CTRL3_GAIN0_X8 0x0c
+#define SX9310_REG_PROX_CTRL3_GAIN12_X4 0x02
+#define SX9310_REG_PROX_CTRL4 0x14
+#define SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST 0x07
+#define SX9310_REG_PROX_CTRL5 0x15
+#define SX9310_REG_PROX_CTRL5_RANGE_SMALL 0xc0
+#define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 0x04
+#define SX9310_REG_PROX_CTRL5_RAWFILT_1P25 0x02
+#define SX9310_REG_PROX_CTRL6 0x16
+#define SX9310_REG_PROX_CTRL6_COMP_COMMON 0x20
+#define SX9310_REG_PROX_CTRL7 0x17
+#define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 0x08
+#define SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 0x05
+#define SX9310_REG_PROX_CTRL8 0x18
+#define SX9310_REG_PROX_CTRL9 0x19
+#define SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 0x40
+#define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 0x88
+#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 0x03
+#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 0x05
+#define SX9310_REG_PROX_CTRL10 0x1a
+#define SX9310_REG_PROX_CTRL10_HYST_6PCT 0x10
+#define SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 0x12
+#define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8 0x03
+#define SX9310_REG_PROX_CTRL11 0x1b
+#define SX9310_REG_PROX_CTRL12 0x1c
+#define SX9310_REG_PROX_CTRL13 0x1d
+#define SX9310_REG_PROX_CTRL14 0x1e
+#define SX9310_REG_PROX_CTRL15 0x1f
+#define SX9310_REG_PROX_CTRL16 0x20
+#define SX9310_REG_PROX_CTRL17 0x21
+#define SX9310_REG_PROX_CTRL18 0x22
+#define SX9310_REG_PROX_CTRL19 0x23
+#define SX9310_REG_SAR_CTRL0 0x2a
+#define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES 0x40
+#define SX9310_REG_SAR_CTRL0_SARHYST_8 0x10
+#define SX9310_REG_SAR_CTRL1 0x2b
+/* Each increment of the slope register is 0.0078125. */
+#define SX9310_REG_SAR_CTRL1_SLOPE(_hnslope) (_hnslope / 78125)
+#define SX9310_REG_SAR_CTRL2 0x2c
+#define SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT 0x3c
+
+#define SX9310_REG_SENSOR_SEL 0x30
+
+#define SX9310_REG_USE_MSB 0x31
+#define SX9310_REG_USE_LSB 0x32
+
+#define SX9310_REG_AVG_MSB 0x33
+#define SX9310_REG_AVG_LSB 0x34
+
+#define SX9310_REG_DIFF_MSB 0x35
+#define SX9310_REG_DIFF_LSB 0x36
+
+#define SX9310_REG_OFFSET_MSB 0x37
+#define SX9310_REG_OFFSET_LSB 0x38
+
+#define SX9310_REG_SAR_MSB 0x39
+#define SX9310_REG_SAR_LSB 0x3a
+
+#define SX9310_REG_I2CADDR 0x40
+#define SX9310_REG_PAUSE 0x41
+#define SX9310_REG_WHOAMI 0x42
+#define SX9310_WHOAMI_VALUE 0x01
+#define SX9311_WHOAMI_VALUE 0x02
+
+#define SX9310_REG_RESET 0x7f
+#define SX9310_SOFT_RESET 0xde
+
+#define SX9310_SCAN_PERIOD_MASK GENMASK(7, 4)
+#define SX9310_SCAN_PERIOD_SHIFT 4
+
+#define SX9310_COMPSTAT_MASK GENMASK(3, 0)
+
+/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
+#define SX9310_NUM_CHANNELS 4
+#define SX9310_CHAN_ENABLED_MASK GENMASK(3, 0)
+
+struct sx9310_data {
+ /* Serialize access to registers and channel configuration */
+ struct mutex mutex;
+ struct i2c_client *client;
+ struct iio_trigger *trig;
+ struct regmap *regmap;
+ /*
+ * Last reading of the proximity status for each channel.
+ * We only send an event to user space when this changes.
+ */
+ bool prox_stat[SX9310_NUM_CHANNELS];
+ bool trigger_enabled;
+ __be16 buffer[SX9310_NUM_CHANNELS +
+ 4]; /* 64-bit data + 64-bit timestamp */
+ /* Remember enabled channels and sample rate during suspend. */
+ unsigned int suspend_ctrl0;
+ struct completion completion;
+ unsigned int chan_read, chan_event;
+ int channel_users[SX9310_NUM_CHANNELS];
+ int whoami;
+};
+
+static const struct iio_event_spec sx9310_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+#define SX9310_NAMED_CHANNEL(idx, name) \
+ { \
+ .type = IIO_PROXIMITY, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .indexed = 1, \
+ .channel = idx, \
+ .extend_name = name, \
+ .address = SX9310_REG_DIFF_MSB, \
+ .event_spec = sx9310_events, \
+ .num_event_specs = ARRAY_SIZE(sx9310_events), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
+
+static const struct iio_chan_spec sx9310_channels[] = {
+ SX9310_CHANNEL(0), /* CS0 */
+ SX9310_CHANNEL(1), /* CS1 */
+ SX9310_CHANNEL(2), /* CS2 */
+ SX9310_NAMED_CHANNEL(3, "comb"), /* COMB */
+
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ */
+static const struct {
+ int val;
+ int val2;
+} sx9310_samp_freq_table[] = {
+ { 500, 0 }, /* 0000: Min (no idle time) */
+ { 66, 666666 }, /* 0001: 15 ms */
+ { 33, 333333 }, /* 0010: 30 ms (Typ.) */
+ { 22, 222222 }, /* 0011: 45 ms */
+ { 16, 666666 }, /* 0100: 60 ms */
+ { 11, 111111 }, /* 0101: 90 ms */
+ { 8, 333333 }, /* 0110: 120 ms */
+ { 5, 0 }, /* 0111: 200 ms */
+ { 2, 500000 }, /* 1000: 400 ms */
+ { 1, 666666 }, /* 1001: 600 ms */
+ { 1, 250000 }, /* 1010: 800 ms */
+ { 1, 0 }, /* 1011: 1 s */
+ { 0, 500000 }, /* 1100: 2 s */
+ { 0, 333333 }, /* 1101: 3 s */
+ { 0, 250000 }, /* 1110: 4 s */
+ { 0, 200000 }, /* 1111: 5 s */
+};
+static const unsigned int sx9310_scan_period_table[] = {
+ 2, 15, 30, 45, 60, 90, 120, 200,
+ 400, 600, 800, 1000, 2000, 3000, 4000, 5000,
+};
+
+static ssize_t sx9310_show_samp_freq_avail(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ",
+ sx9310_samp_freq_table[i].val,
+ sx9310_samp_freq_table[i].val2);
+ buf[len - 1] = '\n';
+ return len;
+}
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail);
+
+static const struct regmap_range sx9310_writable_reg_ranges[] = {
+ regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
+ regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+ regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+ regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL),
+ regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB),
+ regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE),
+ regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_writeable_regs = {
+ .yes_ranges = sx9310_writable_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_readable_reg_ranges[] = {
+ regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC),
+ regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+ regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+ regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
+ regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+ regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_readable_regs = {
+ .yes_ranges = sx9310_readable_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_volatile_reg_ranges[] = {
+ regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1),
+ regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB),
+ regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB),
+ regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_volatile_regs = {
+ .yes_ranges = sx9310_volatile_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9310_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = SX9310_REG_RESET,
+ .cache_type = REGCACHE_RBTREE,
+
+ .wr_table = &sx9310_writeable_regs,
+ .rd_table = &sx9310_readable_regs,
+ .volatile_table = &sx9310_volatile_regs,
+};
+
+static int sx9310_update_chan_en(struct sx9310_data *data,
+ unsigned int chan_read,
+ unsigned int chan_event)
+{
+ int ret;
+
+ if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
+ ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
+ SX9310_CHAN_ENABLED_MASK,
+ chan_read | chan_event);
+ if (ret)
+ return ret;
+ }
+ data->chan_read = chan_read;
+ data->chan_event = chan_event;
+ return 0;
+}
+
+static int sx9310_get_read_channel(struct sx9310_data *data, int channel)
+{
+ return sx9310_update_chan_en(data, data->chan_read | BIT(channel),
+ data->chan_event);
+}
+
+static int sx9310_put_read_channel(struct sx9310_data *data, int channel)
+{
+ return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel),
+ data->chan_event);
+}
+
+static int sx9310_get_event_channel(struct sx9310_data *data, int channel)
+{
+ return sx9310_update_chan_en(data, data->chan_read,
+ data->chan_event | BIT(channel));
+}
+
+static int sx9310_put_event_channel(struct sx9310_data *data, int channel)
+{
+ return sx9310_update_chan_en(data, data->chan_read,
+ data->chan_event & ~BIT(channel));
+}
+
+static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq)
+{
+ return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq);
+}
+
+static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq)
+{
+ return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0);
+}
+
+static int sx9310_read_prox_data(struct sx9310_data *data,
+ const struct iio_chan_spec *chan, __be16 *val)
+{
+ int ret;
+
+ ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
+ if (ret < 0)
+ return ret;
+
+ return regmap_bulk_read(data->regmap, chan->address, val, 2);
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9310_wait_for_sample(struct sx9310_data *data)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
+ if (ret < 0)
+ return ret;
+
+ val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+
+ msleep(sx9310_scan_period_table[val]);
+
+ return 0;
+}
+
+static int sx9310_read_proximity(struct sx9310_data *data,
+ const struct iio_chan_spec *chan, int *val)
+{
+ int ret = 0;
+ __be16 rawval;
+
+ mutex_lock(&data->mutex);
+
+ ret = sx9310_get_read_channel(data, chan->channel);
+ if (ret < 0)
+ goto out;
+
+ ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+ if (ret < 0)
+ goto out_put_channel;
+
+ mutex_unlock(&data->mutex);
+
+ if (data->client->irq > 0) {
+ ret = wait_for_completion_interruptible(&data->completion);
+ reinit_completion(&data->completion);
+ } else {
+ ret = sx9310_wait_for_sample(data);
+ }
+
+ mutex_lock(&data->mutex);
+
+ if (ret < 0)
+ goto out_disable_irq;
+
+ ret = sx9310_read_prox_data(data, chan, &rawval);
+ if (ret < 0)
+ goto out_disable_irq;
+
+ *val = sign_extend32(be16_to_cpu(rawval),
+ (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
+
+ ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+ if (ret < 0)
+ goto out_put_channel;
+
+ ret = sx9310_put_read_channel(data, chan->channel);
+ if (ret < 0)
+ goto out;
+
+ mutex_unlock(&data->mutex);
+
+ return IIO_VAL_INT;
+
+out_disable_irq:
+ sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+out_put_channel:
+ sx9310_put_read_channel(data, chan->channel);
+out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
+{
+ unsigned int regval;
+ int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
+
+ if (ret < 0)
+ return ret;
+
+ regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+ *val = sx9310_samp_freq_table[regval].val;
+ *val2 = sx9310_samp_freq_table[regval].val2;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9310_read_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *val,
+ int *val2, long mask)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret;
+
+ if (chan->type != IIO_PROXIMITY)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = sx9310_read_proximity(data, chan, val);
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return sx9310_read_samp_freq(data, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
+{
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
+ if (val == sx9310_samp_freq_table[i].val &&
+ val2 == sx9310_samp_freq_table[i].val2)
+ break;
+
+ if (i == ARRAY_SIZE(sx9310_samp_freq_table))
+ return -EINVAL;
+
+ mutex_lock(&data->mutex);
+
+ ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
+ SX9310_SCAN_PERIOD_MASK,
+ i << SX9310_SCAN_PERIOD_SHIFT);
+
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int sx9310_write_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int val, int val2,
+ long mask)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+
+ if (chan->type != IIO_PROXIMITY)
+ return -EINVAL;
+
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return sx9310_set_samp_freq(data, val, val2);
+}
+
+static irqreturn_t sx9310_irq_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sx9310_data *data = iio_priv(indio_dev);
+
+ if (data->trigger_enabled)
+ iio_trigger_poll(data->trig);
+
+ /*
+ * Even if no event is enabled, we need to wake the thread to
+ * clear the interrupt state by reading SX9310_REG_IRQ_SRC. It
+ * is not possible to do that here because regmap_read takes a
+ * mutex.
+ */
+ return IRQ_WAKE_THREAD;
+}
+
+static void sx9310_push_events(struct iio_dev *indio_dev)
+{
+ int ret;
+ unsigned int val, chan;
+ struct sx9310_data *data = iio_priv(indio_dev);
+ s64 timestamp = iio_get_time_ns(indio_dev);
+
+ /* Read proximity state on all channels */
+ ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "i2c transfer error in irq\n");
+ return;
+ }
+
+ for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
+ int dir;
+ u64 ev;
+ bool new_prox = val & BIT(chan);
+
+ if (!(data->chan_event & BIT(chan)))
+ continue;
+ if (new_prox == data->prox_stat[chan])
+ /* No change on this channel. */
+ continue;
+
+ dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+ ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+ IIO_EV_TYPE_THRESH, dir);
+
+ iio_push_event(indio_dev, ev, timestamp);
+ data->prox_stat[chan] = new_prox;
+ }
+}
+
+static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret;
+ unsigned int val;
+
+ mutex_lock(&data->mutex);
+
+ ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "i2c transfer error in irq\n");
+ goto out;
+ }
+
+ if (val & SX9310_EVENT_IRQ)
+ sx9310_push_events(indio_dev);
+
+ if (val & SX9310_CONVDONE_IRQ)
+ complete(&data->completion);
+
+out:
+ mutex_unlock(&data->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static int sx9310_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+
+ return !!(data->chan_event & BIT(chan->channel));
+}
+
+static int sx9310_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret;
+
+ /* If the state hasn't changed, there's nothing to do. */
+ if (!!(data->chan_event & BIT(chan->channel)) == state)
+ return 0;
+
+ mutex_lock(&data->mutex);
+ if (state) {
+ ret = sx9310_get_event_channel(data, chan->channel);
+ if (ret < 0)
+ goto out_unlock;
+ if (!(data->chan_event & ~BIT(chan->channel))) {
+ ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+ if (ret < 0)
+ sx9310_put_event_channel(data, chan->channel);
+ }
+ } else {
+ ret = sx9310_put_event_channel(data, chan->channel);
+ if (ret < 0)
+ goto out_unlock;
+ if (!data->chan_event) {
+ ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+ if (ret < 0)
+ sx9310_get_event_channel(data, chan->channel);
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static struct attribute *sx9310_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group sx9310_attribute_group = {
+ .attrs = sx9310_attributes,
+};
+
+static const struct iio_info sx9310_info = {
+ .attrs = &sx9310_attribute_group,
+ .read_raw = sx9310_read_raw,
+ .write_raw = sx9310_write_raw,
+ .read_event_config = sx9310_read_event_config,
+ .write_event_config = sx9310_write_event_config,
+};
+
+static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret = 0;
+
+ mutex_lock(&data->mutex);
+
+ if (state)
+ ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
+ else if (!data->chan_read)
+ ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
+ if (ret < 0)
+ goto out;
+
+ data->trigger_enabled = state;
+
+out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static const struct iio_trigger_ops sx9310_trigger_ops = {
+ .set_trigger_state = sx9310_set_trigger_state,
+};
+
+static irqreturn_t sx9310_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct sx9310_data *data = iio_priv(indio_dev);
+ __be16 val;
+ int bit, ret, i = 0;
+
+ mutex_lock(&data->mutex);
+
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
+ &val);
+ if (ret < 0)
+ goto out;
+
+ data->buffer[i++] = val;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ pf->timestamp);
+
+out:
+ mutex_unlock(&data->mutex);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ unsigned int channels = 0;
+ int bit, ret;
+
+ mutex_lock(&data->mutex);
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength)
+ channels |= BIT(indio_dev->channels[bit].channel);
+
+ ret = sx9310_update_chan_en(data, channels, data->chan_event);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int sx9310_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = sx9310_update_chan_en(data, 0, data->chan_event);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = {
+ .preenable = sx9310_buffer_preenable,
+ .postenable = iio_triggered_buffer_postenable,
+ .predisable = iio_triggered_buffer_predisable,
+ .postdisable = sx9310_buffer_postdisable,
+};
+
+struct sx9310_reg_default {
+ u8 reg;
+ u8 def;
+};
+
+#define SX_INIT(_reg, _def) \
+ { \
+ .reg = SX9310_REG_##_reg, \
+ .def = _def, \
+ }
+
+static const struct sx9310_reg_default sx9310_default_regs[] = {
+ SX_INIT(IRQ_MSK, 0x00),
+ SX_INIT(IRQ_FUNC, 0x00),
+ /*
+ * The lower 4 bits should not be set as it enable sensors measurements.
+ * Turning the detection on before the configuration values are set to
+ * good values can cause the device to return erroneous readings.
+ */
+ SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
+ SX_INIT(PROX_CTRL1, 0x00),
+ SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
+ SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
+ SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+ SX9310_REG_PROX_CTRL3_GAIN12_X4),
+ SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
+ SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+ SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+ SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
+ SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
+ SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+ SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
+ SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+ SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
+ SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
+ SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
+ SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+ SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
+ SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
+ SX_INIT(PROX_CTRL11, 0x00),
+ SX_INIT(PROX_CTRL12, 0x00),
+ SX_INIT(PROX_CTRL13, 0x00),
+ SX_INIT(PROX_CTRL14, 0x00),
+ SX_INIT(PROX_CTRL15, 0x00),
+ SX_INIT(PROX_CTRL16, 0x00),
+ SX_INIT(PROX_CTRL17, 0x00),
+ SX_INIT(PROX_CTRL18, 0x00),
+ SX_INIT(PROX_CTRL19, 0x00),
+ SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+ SX9310_REG_SAR_CTRL0_SARHYST_8),
+ SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
+ SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9310_init_compensation(struct iio_dev *indio_dev)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int i, ret;
+ unsigned int val;
+ unsigned int ctrl0;
+
+ ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
+ if (ret < 0)
+ return ret;
+
+ /* run the compensation phase on all channels */
+ ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+ ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+ if (ret < 0)
+ return ret;
+
+ for (i = 100; i >= 0; i--) {
+ msleep(20);
+ ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
+ if (ret < 0)
+ goto out;
+ if (!(val & SX9310_COMPSTAT_MASK))
+ break;
+ }
+
+ if (i < 0) {
+ dev_err(&data->client->dev,
+ "initial compensation timed out: 0x%02x", val);
+ ret = -ETIMEDOUT;
+ }
+
+out:
+ regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+ return ret;
+}
+
+static int sx9310_init_device(struct iio_dev *indio_dev)
+{
+ struct sx9310_data *data = iio_priv(indio_dev);
+ const struct sx9310_reg_default *initval;
+ int ret;
+ unsigned int i, val;
+
+ ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(1000, 2000); /* power-up time is ~1ms. */
+
+ /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
+ ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
+ if (ret < 0)
+ return ret;
+
+ /* Program some sane defaults. */
+ for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
+ initval = &sx9310_default_regs[i];
+ ret = regmap_write(data->regmap, initval->reg, initval->def);
+ if (ret < 0)
+ return ret;
+ }
+
+ return sx9310_init_compensation(indio_dev);
+}
+
+static int sx9310_set_indio_dev_name(struct device *dev,
+ struct iio_dev *indio_dev,
+ const struct i2c_device_id *id, int whoami)
+{
+ const struct acpi_device_id *acpi_id;
+
+ /* id will be NULL when enumerated via ACPI */
+ if (id) {
+ if (id->driver_data != whoami)
+ dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
+ id->name);
+ } else if (ACPI_HANDLE(dev)) {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id)
+ return -ENODEV;
+ if (acpi_id->driver_data != whoami)
+ dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
+ acpi_id->id);
+ } else
+ return -ENODEV;
+
+ switch (whoami) {
+ case SX9310_WHOAMI_VALUE:
+ indio_dev->name = "sx9310";
+ break;
+ case SX9311_WHOAMI_VALUE:
+ indio_dev->name = "sx9311";
+ break;
+ default:
+ dev_err(dev, "unexpected WHOAMI response: %u", whoami);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int sx9310_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct sx9310_data *data;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->mutex);
+ init_completion(&data->completion);
+
+ data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
+ if (ret < 0) {
+ dev_err(&client->dev, "error in reading WHOAMI register: %d",
+ ret);
+ return ret;
+ }
+
+ ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
+ data->whoami);
+ if (ret < 0)
+ return ret;
+
+ ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = sx9310_channels;
+ indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
+ indio_dev->info = &sx9310_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ i2c_set_clientdata(client, indio_dev);
+
+ ret = sx9310_init_device(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ sx9310_irq_handler,
+ sx9310_irq_thread_handler,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "sx9310_event", indio_dev);
+ if (ret < 0)
+ return ret;
+
+ data->trig =
+ devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+ if (!data->trig)
+ return -ENOMEM;
+
+ data->trig->dev.parent = &client->dev;
+ data->trig->ops = &sx9310_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(&client->dev, data->trig);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+ iio_pollfunc_store_time,
+ sx9310_trigger_handler,
+ &sx9310_buffer_setup_ops);
+ if (ret < 0)
+ return ret;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int __maybe_unused sx9310_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct sx9310_data *data = iio_priv(indio_dev);
+ u8 ctrl0;
+ int ret;
+
+ disable_irq_nosync(data->client->irq);
+
+ mutex_lock(&data->mutex);
+ ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
+ &data->suspend_ctrl0);
+
+ if (ret)
+ goto out;
+
+ ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+ ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
+
+out:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int __maybe_unused sx9310_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct sx9310_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+ data->suspend_ctrl0);
+
+out:
+ mutex_unlock(&data->mutex);
+
+ enable_irq(data->client->irq);
+
+ return ret;
+}
+
+static const struct dev_pm_ops sx9310_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sx9310_suspend, sx9310_resume)
+};
+
+static const struct acpi_device_id sx9310_acpi_match[] = {
+ { "STH9310", SX9310_WHOAMI_VALUE },
+ { "STH9311", SX9311_WHOAMI_VALUE },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
+
+static const struct of_device_id sx9310_of_match[] = {
+ { .compatible = "semtech,sx9310" },
+ { .compatible = "semtech,sx9311" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sx9310_of_match);
+
+static const struct i2c_device_id sx9310_id[] = {
+ { "sx9310", SX9310_WHOAMI_VALUE },
+ { "sx9311", SX9311_WHOAMI_VALUE },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, sx9310_id);
+
+static struct i2c_driver sx9310_driver = {
+ .driver = {
+ .name = "sx9310",
+ .acpi_match_table = ACPI_PTR(sx9310_acpi_match),
+ .of_match_table = of_match_ptr(sx9310_of_match),
+ .pm = &sx9310_pm_ops,
+ },
+ .probe = sx9310_probe,
+ .id_table = sx9310_id,
+};
+module_i2c_driver(sx9310_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_AUTHOR("Daniel Campello <campello@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index d39c0d6b77f1..8976e8d59826 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -390,8 +390,8 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
* For custom steinhart, the full u32 is taken. For all the others
* the MSB is discarded.
*/
- const u8 n_size = (is_steinhart == true) ? 4 : 3;
- const u8 e_size = (is_steinhart == true) ? sizeof(u32) : sizeof(u64);
+ const u8 n_size = is_steinhart ? 4 : 3;
+ const u8 e_size = is_steinhart ? sizeof(u32) : sizeof(u64);
n_entries = of_property_count_elems_of_size(np, propname, e_size);
/* n_entries must be an even number */
diff --git a/drivers/iio/trigger/iio-trig-hrtimer.c b/drivers/iio/trigger/iio-trig-hrtimer.c
index a5e670726717..f59bf8d58586 100644
--- a/drivers/iio/trigger/iio-trig-hrtimer.c
+++ b/drivers/iio/trigger/iio-trig-hrtimer.c
@@ -4,7 +4,7 @@
*
* Copyright (C) Intuitive Aerial AB
* Written by Marten Svanfeldt, marten@intuitiveaerial.com
- * Copyright (C) 2012, Analog Device Inc.
+ * Copyright (C) 2012, Analog Devices Inc.
* Author: Lars-Peter Clausen <lars@metafoo.de>
* Copyright (C) 2015, Intel Corporation
*/
diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt
index 43f92b06bc3e..ebdc64f451d7 100644
--- a/drivers/staging/iio/Documentation/overview.txt
+++ b/drivers/staging/iio/Documentation/overview.txt
@@ -34,7 +34,7 @@ turned on or off (if possible) via sysfs interfaces.
fifo / ring buffers on the sensor chip. These greatly reduce the load
on the host CPU by buffering relatively large numbers of data samples
based on an internal sampling clock. Examples include VTI SCA3000
-series and Analog Device ADXL345 accelerometers. Each buffer supports
+series and Analog Devices ADXL345 accelerometers. Each buffer supports
polling to establish when data is available.
* Trigger and software buffer support. In many data analysis
diff --git a/include/linux/fpga/adi-axi-common.h b/include/linux/fpga/adi-axi-common.h
index 7fc95d5c95bb..141ac3f251e6 100644
--- a/include/linux/fpga/adi-axi-common.h
+++ b/include/linux/fpga/adi-axi-common.h
@@ -11,9 +11,13 @@
#ifndef ADI_AXI_COMMON_H_
#define ADI_AXI_COMMON_H_
-#define ADI_AXI_REG_VERSION 0x0000
+#define ADI_AXI_REG_VERSION 0x0000
#define ADI_AXI_PCORE_VER(major, minor, patch) \
(((major) << 16) | ((minor) << 8) | (patch))
+#define ADI_AXI_PCORE_VER_MAJOR(version) (((version) >> 16) & 0xff)
+#define ADI_AXI_PCORE_VER_MINOR(version) (((version) >> 8) & 0xff)
+#define ADI_AXI_PCORE_VER_PATCH(version) ((version) & 0xff)
+
#endif /* ADI_AXI_COMMON_H_ */
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index 5a127c0ed200..a3a838dcf8e4 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -133,62 +133,4 @@ void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev);
int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig);
-#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
- _storagebits, _shift, _extend_name, _type, _mask_all) \
- { \
- .type = (_type), \
- .differential = (_channel2 == -1 ? 0 : 1), \
- .indexed = 1, \
- .channel = (_channel1), \
- .channel2 = (_channel2), \
- .address = (_address), \
- .extend_name = (_extend_name), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
- BIT(IIO_CHAN_INFO_OFFSET), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .info_mask_shared_by_all = _mask_all, \
- .scan_index = (_si), \
- .scan_type = { \
- .sign = 'u', \
- .realbits = (_bits), \
- .storagebits = (_storagebits), \
- .shift = (_shift), \
- .endianness = IIO_BE, \
- }, \
- }
-
-#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
- _storagebits, _shift) \
- __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
- _storagebits, _shift, NULL, IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
- _storagebits, _shift) \
- __AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \
- _storagebits, _shift, "shorted", IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \
- _storagebits, _shift) \
- __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
- _storagebits, _shift, NULL, IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_CHANNEL_NO_SAMP_FREQ(_si, _channel, _address, _bits, \
- _storagebits, _shift) \
- __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
- _storagebits, _shift, NULL, IIO_VOLTAGE, 0)
-
-#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
- __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \
- _storagebits, _shift, NULL, IIO_TEMP, \
- BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
-#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
- _shift) \
- __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
- _storagebits, _shift, "supply", IIO_VOLTAGE, \
- BIT(IIO_CHAN_INFO_SAMP_FREQ))
-
#endif
diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h
new file mode 100644
index 000000000000..c5d48e1c2d36
--- /dev/null
+++ b/include/linux/iio/adc/adi-axi-adc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Analog Devices Generic AXI ADC IP core driver/library
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+#ifndef __ADI_AXI_ADC_H__
+#define __ADI_AXI_ADC_H__
+
+struct device;
+struct iio_chan_spec;
+
+/**
+ * struct adi_axi_adc_chip_info - Chip specific information
+ * @name Chip name
+ * @id Chip ID (usually product ID)
+ * @channels Channel specifications of type @struct axi_adc_chan_spec
+ * @num_channels Number of @channels
+ * @scale_table Supported scales by the chip; tuples of 2 ints
+ * @num_scales Number of scales in the table
+ * @max_rate Maximum sampling rate supported by the device
+ */
+struct adi_axi_adc_chip_info {
+ const char *name;
+ unsigned int id;
+
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+
+ const unsigned int (*scale_table)[2];
+ int num_scales;
+
+ unsigned long max_rate;
+};
+
+/**
+ * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC
+ * @chip_info chip info details for the client ADC
+ * @preenable_setup op to run in the client before enabling the AXI ADC
+ * @reg_access IIO debugfs_reg_access hook for the client ADC
+ * @read_raw IIO read_raw hook for the client ADC
+ * @write_raw IIO write_raw hook for the client ADC
+ */
+struct adi_axi_adc_conv {
+ const struct adi_axi_adc_chip_info *chip_info;
+
+ int (*preenable_setup)(struct adi_axi_adc_conv *conv);
+ int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval);
+ int (*read_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask);
+ int (*write_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask);
+};
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv);
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv);
+
+#endif
diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h
index 016d8a068353..ff15c61bf319 100644
--- a/include/linux/iio/buffer-dma.h
+++ b/include/linux/iio/buffer-dma.h
@@ -11,7 +11,7 @@
#include <linux/kref.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
struct iio_dma_buffer_queue;
struct iio_dma_buffer_ops;
diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h
index b3a57444a886..0e503db71289 100644
--- a/include/linux/iio/buffer-dmaengine.h
+++ b/include/linux/iio/buffer-dmaengine.h
@@ -14,4 +14,7 @@ struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
const char *channel);
void iio_dmaengine_buffer_free(struct iio_buffer *buffer);
+struct iio_buffer *devm_iio_dmaengine_buffer_alloc(struct device *dev,
+ const char *channel);
+
#endif
diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
index a4d2d8061ef6..a63dc07b7350 100644
--- a/include/linux/iio/buffer_impl.h
+++ b/include/linux/iio/buffer_impl.h
@@ -94,12 +94,6 @@ struct iio_buffer {
unsigned int watermark;
/* private: */
- /*
- * @scan_el_attrs: Control of scan elements if that scan mode
- * control method is used.
- */
- struct attribute_group *scan_el_attrs;
-
/* @scan_timestamp: Does the scan mode include a timestamp. */
bool scan_timestamp;
@@ -115,9 +109,6 @@ struct iio_buffer {
*/
struct attribute_group scan_el_group;
- /* @stufftoread: Flag to indicate new data. */
- bool stufftoread;
-
/* @attrs: Standard attributes of the buffer. */
const struct attribute **attrs;
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 2bde8c912d4d..c4118dcb8e05 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -64,15 +64,6 @@ void iio_channel_release(struct iio_channel *chan);
struct iio_channel *devm_iio_channel_get(struct device *dev,
const char *consumer_channel);
/**
- * devm_iio_channel_release() - Resource managed version of
- * iio_channel_release().
- * @dev: Pointer to consumer device for which resource
- * is allocared.
- * @chan: The channel to be released.
- */
-void devm_iio_channel_release(struct device *dev, struct iio_channel *chan);
-
-/**
* iio_channel_get_all() - get all channels associated with a client
* @dev: Pointer to consumer device.
*
@@ -106,15 +97,6 @@ void iio_channel_release_all(struct iio_channel *chan);
*/
struct iio_channel *devm_iio_channel_get_all(struct device *dev);
-/**
- * devm_iio_channel_release_all() - Resource managed version of
- * iio_channel_release_all().
- * @dev: Pointer to consumer device for which resource
- * is allocared.
- * @chan: Array channel to be released.
- */
-void devm_iio_channel_release_all(struct device *dev, struct iio_channel *chan);
-
struct iio_cb_buffer;
/**
* iio_channel_get_all_cb() - register callback for triggered capture
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
index 44d48bb1d39f..e8255c2e33bc 100644
--- a/include/linux/iio/hw-consumer.h
+++ b/include/linux/iio/hw-consumer.h
@@ -14,7 +14,6 @@ struct iio_hw_consumer;
struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
-void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 17f56a070b20..5f9f439a4f01 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -492,7 +492,7 @@ struct iio_buffer_setup_ops {
* @buffer: [DRIVER] any buffer present
* @buffer_list: [INTERN] list of all buffers currently attached
* @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux
- * @mlock: [DRIVER] lock used to prevent simultaneous device state
+ * @mlock: [INTERN] lock used to prevent simultaneous device state
* changes
* @available_scan_masks: [DRIVER] optional array of allowed bitmasks
* @masklength: [INTERN] the length of the mask established from
@@ -593,9 +593,6 @@ void iio_device_unregister(struct iio_dev *indio_dev);
* calls iio_device_register() internally. Refer to that function for more
* information.
*
- * If an iio_dev registered with this function needs to be unregistered
- * separately, devm_iio_device_unregister() must be used.
- *
* RETURNS:
* 0 on success, negative error number on failure.
*/
@@ -603,7 +600,6 @@ void iio_device_unregister(struct iio_dev *indio_dev);
__devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
-void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
void iio_device_release_direct_mode(struct iio_dev *indio_dev);
@@ -694,13 +690,9 @@ static inline struct iio_dev *iio_priv_to_dev(void *priv)
}
void iio_device_free(struct iio_dev *indio_dev);
-int devm_iio_device_match(struct device *dev, void *res, void *data);
struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv);
-void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev);
struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
const char *fmt, ...);
-void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig);
-
/**
* iio_buffer_enabled() - helper function to test if the buffer is enabled
* @indio_dev: IIO device structure for device
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
index 764659e01b68..1fc1efa7799d 100644
--- a/include/linux/iio/kfifo_buf.h
+++ b/include/linux/iio/kfifo_buf.h
@@ -9,6 +9,5 @@ struct iio_buffer *iio_kfifo_allocate(void);
void iio_kfifo_free(struct iio_buffer *r);
struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev);
-void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r);
#endif
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index 84995e2967ac..cad8325903f9 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -141,9 +141,6 @@ int __devm_iio_trigger_register(struct device *dev,
**/
void iio_trigger_unregister(struct iio_trigger *trig_info);
-void devm_iio_trigger_unregister(struct device *dev,
- struct iio_trigger *trig_info);
-
/**
* iio_trigger_set_immutable() - set an immutable trigger on destination
*
diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h
index 238ad30ce166..e99c91799359 100644
--- a/include/linux/iio/triggered_buffer.h
+++ b/include/linux/iio/triggered_buffer.h
@@ -18,7 +18,5 @@ int devm_iio_triggered_buffer_setup(struct device *dev,
irqreturn_t (*h)(int irq, void *p),
irqreturn_t (*thread)(int irq, void *p),
const struct iio_buffer_setup_ops *ops);
-void devm_iio_triggered_buffer_cleanup(struct device *dev,
- struct iio_dev *indio_dev);
#endif