summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-02-22 20:39:11 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-02-22 20:39:11 +0300
commit5d26c176d58bc3f9380b18ba2f51a1d863c6a5a0 (patch)
tree534a9d04ef361ee8a9f0cdf3bb9a7f87d0e27a83
parentb996c10e0f5b2cfd5b2cbf048cce83982bfe662d (diff)
parenta51afb13311cd85b2f638c691b2734622277d8f5 (diff)
downloadlinux-5d26c176d58bc3f9380b18ba2f51a1d863c6a5a0.tar.xz
Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ...
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml153
-rw-r--r--Documentation/devicetree/bindings/thermal/tango-thermal.txt17
-rw-r--r--Documentation/devicetree/bindings/thermal/zx2967-thermal.txt116
-rw-r--r--Documentation/driver-api/thermal/sysfs-api.rst13
-rw-r--r--drivers/acpi/thermal.c49
-rw-r--r--drivers/hwmon/pwm-fan.c1
-rw-r--r--drivers/iio/adc/qcom-vadc-common.c50
-rw-r--r--drivers/platform/x86/acerhdf.c3
-rw-r--r--drivers/thermal/Kconfig17
-rw-r--r--drivers/thermal/Makefile2
-rw-r--r--drivers/thermal/cpufreq_cooling.c2
-rw-r--r--drivers/thermal/da9062-thermal.c4
-rw-r--r--drivers/thermal/gov_power_allocator.c37
-rw-r--r--drivers/thermal/gov_step_wise.c14
-rw-r--r--drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c6
-rw-r--r--drivers/thermal/intel/intel_pch_thermal.c6
-rw-r--r--drivers/thermal/khadas_mcu_fan.c1
-rw-r--r--drivers/thermal/qcom/Kconfig11
-rw-r--r--drivers/thermal/qcom/Makefile1
-rw-r--r--drivers/thermal/qcom/qcom-spmi-adc-tm5.c623
-rw-r--r--drivers/thermal/tango_thermal.c126
-rw-r--r--drivers/thermal/thermal_core.c72
-rw-r--r--drivers/thermal/thermal_core.h7
-rw-r--r--drivers/thermal/thermal_helpers.c7
-rw-r--r--drivers/thermal/thermal_sysfs.c85
-rw-r--r--drivers/thermal/ti-soc-thermal/omap4-thermal-data.c7
-rw-r--r--drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h4
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-bandgap.c54
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-bandgap.h2
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c6
-rw-r--r--drivers/thermal/zx2967_thermal.c256
-rw-r--r--include/linux/iio/adc/qcom-vadc-common.h3
-rw-r--r--include/linux/thermal.h18
33 files changed, 978 insertions, 795 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
new file mode 100644
index 000000000000..7cd364430573
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+ compatible:
+ const: qcom,spmi-adc-tm5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 1
+ description:
+ Number of cells required to uniquely identify the thermal sensors. Since
+ we have multiple sensors this is set to 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ qcom,avg-samples:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of samples to be used for measurement.
+ enum:
+ - 1
+ - 2
+ - 4
+ - 8
+ - 16
+ default: 1
+
+ qcom,decimation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: This parameter is used to decrease ADC sampling rate.
+ Quicker measurements can be made by reducing decimation ratio.
+ enum:
+ - 250
+ - 420
+ - 840
+ default: 840
+
+patternProperties:
+ "^([-a-z0-9]*)@[0-7]$":
+ type: object
+ description:
+ Represent one thermal sensor.
+
+ properties:
+ reg:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+ minimum: 0
+ maximum: 7
+
+ io-channels:
+ description:
+ From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+ qcom,ratiometric:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Channel calibration type.
+ If this property is specified VADC will use the VDD reference
+ (1.875V) and GND for channel calibration. If property is not found,
+ channel will be calibrated with 0V and 1.25V reference channels,
+ also known as absolute calibration.
+
+ qcom,hw-settle-time-us:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Time between AMUX getting configured and the ADC starting conversion.
+ enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
+
+ qcom,pre-scaling:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Used for scaling the channel input signal before the
+ signal is fed to VADC. The configuration for this node is to know the
+ pre-determined ratio and use it for post scaling. It is a pair of
+ integers, denoting the numerator and denominator of the fraction by
+ which input signal is multiplied. For example, <1 3> indicates the
+ signal is scaled down to 1/3 of its value before ADC measurement. If
+ property is not found default value depending on chip will be used.
+ items:
+ - const: 1
+ - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+ required:
+ - reg
+ - io-channels
+
+ additionalProperties:
+ false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+ - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/qcom,spmi-vadc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spmi_bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pm8150b_adc: adc@3100 {
+ reg = <0x3100>;
+ compatible = "qcom,spmi-adc5";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ /* Other propreties are omitted */
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+ };
+
+ pm8150b_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt
deleted file mode 100644
index 2c918d742867..000000000000
--- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Tango Thermal
-
-The SMP8758 SoC includes 3 instances of this temperature sensor
-(in the CPU, video decoder, and PCIe controller).
-
-Required properties:
-- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-- compatible: "sigma,smp8758-thermal"
-- reg: Address range of the thermal registers
-
-Example:
-
- cpu_temp: thermal@920100 {
- #thermal-sensor-cells = <0>;
- compatible = "sigma,smp8758-thermal";
- reg = <0x920100 12>;
- };
diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
deleted file mode 100644
index 3dc1c6bf0478..000000000000
--- a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* ZTE zx2967 family Thermal
-
-Required Properties:
-- compatible: should be one of the following.
- * zte,zx296718-thermal
-- reg: physical base address of the controller and length of memory mapped
- region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "topcrm" for the topcrm clock.
- "apb" for the apb clock.
-- #thermal-sensor-cells: must be 0.
-
-Please note: slope coefficient defined in thermal-zones section need to be
-multiplied by 1000.
-
-Example for tempsensor:
-
- tempsensor: tempsensor@148a000 {
- compatible = "zte,zx296718-thermal";
- reg = <0x0148a000 0x20>;
- clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
- clock-names = "topcrm", "apb";
- #thermal-sensor-cells = <0>;
- };
-
-Example for cooling device:
-
- cooling_dev: cooling_dev {
- cluster0_cooling_dev: cluster0-cooling-dev {
- #cooling-cells = <2>;
- cpumask = <0xf>;
- capacitance = <1500>;
- };
-
- cluster1_cooling_dev: cluster1-cooling-dev {
- #cooling-cells = <2>;
- cpumask = <0x30>;
- capacitance = <2000>;
- };
- };
-
-Example for thermal zones:
-
- thermal-zones {
- zx296718_thermal: zx296718_thermal {
- polling-delay-passive = <500>;
- polling-delay = <1000>;
- sustainable-power = <6500>;
-
- thermal-sensors = <&tempsensor 0>;
- /*
- * slope need to be multiplied by 1000.
- */
- coefficients = <1951 (-922)>;
-
- trips {
- trip0: switch_on_temperature {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- trip1: desired_temperature {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- crit: critical_temperature {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&trip0>;
- cooling-device = <&gpu 2 5>;
- };
-
- map1 {
- trip = <&trip0>;
- cooling-device = <&cluster0_cooling_dev 1 2>;
- };
-
- map2 {
- trip = <&trip1>;
- cooling-device = <&cluster0_cooling_dev 1 2>;
- };
-
- map3 {
- trip = <&crit>;
- cooling-device = <&cluster0_cooling_dev 1 2>;
- };
-
- map4 {
- trip = <&trip0>;
- cooling-device = <&cluster1_cooling_dev 1 2>;
- contribution = <9000>;
- };
-
- map5 {
- trip = <&trip1>;
- cooling-device = <&cluster1_cooling_dev 1 2>;
- contribution = <4096>;
- };
-
- map6 {
- trip = <&crit>;
- cooling-device = <&cluster1_cooling_dev 1 2>;
- contribution = <4096>;
- };
- };
- };
- };
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index e7520cb439ac..a4969c474cc3 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -520,19 +520,6 @@ available_policies
RW, Optional
-passive
- Attribute is only present for zones in which the passive cooling
- policy is not supported by native thermal driver. Default is zero
- and can be set to a temperature (in millidegrees) to enable a
- passive trip point for the zone. Activation is done by polling with
- an interval of 1 second.
-
- Unit: millidegrees Celsius
-
- Valid values: 0 (disabled) or greater than 1000
-
- RW, Optional
-
emul_temp
Interface to set the emulated temperature method in thermal zone
(sensor). After setting this temperature, the thermal zone may pass
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 4f906380b031..95105db642b9 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -670,27 +670,24 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
return 0;
}
-
-static int thermal_notify(struct thermal_zone_device *thermal, int trip,
- enum thermal_trip_type trip_type)
+static void acpi_thermal_zone_device_hot(struct thermal_zone_device *thermal)
{
- u8 type = 0;
struct acpi_thermal *tz = thermal->devdata;
- if (trip_type == THERMAL_TRIP_CRITICAL)
- type = ACPI_THERMAL_NOTIFY_CRITICAL;
- else if (trip_type == THERMAL_TRIP_HOT)
- type = ACPI_THERMAL_NOTIFY_HOT;
- else
- return 0;
-
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- dev_name(&tz->device->dev), type, 1);
+ dev_name(&tz->device->dev),
+ ACPI_THERMAL_NOTIFY_HOT, 1);
+}
- if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
- return 1;
+static void acpi_thermal_zone_device_critical(struct thermal_zone_device *thermal)
+{
+ struct acpi_thermal *tz = thermal->devdata;
- return 0;
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ dev_name(&tz->device->dev),
+ ACPI_THERMAL_NOTIFY_CRITICAL, 1);
+
+ thermal_zone_device_critical(thermal);
}
static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
@@ -760,25 +757,6 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
}
}
- for (i = 0; i < tz->devices.count; i++) {
- handle = tz->devices.handles[i];
- status = acpi_bus_get_device(handle, &dev);
- if (ACPI_SUCCESS(status) && (dev == device)) {
- if (bind)
- result = thermal_zone_bind_cooling_device
- (thermal, THERMAL_TRIPS_NONE,
- cdev, THERMAL_NO_LIMIT,
- THERMAL_NO_LIMIT,
- THERMAL_WEIGHT_DEFAULT);
- else
- result = thermal_zone_unbind_cooling_device
- (thermal, THERMAL_TRIPS_NONE,
- cdev);
- if (result)
- goto failed;
- }
- }
-
failed:
return result;
}
@@ -805,7 +783,8 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
.get_trip_temp = thermal_get_trip_temp,
.get_crit_temp = thermal_get_crit_temp,
.get_trend = thermal_get_trend,
- .notify = thermal_notify,
+ .hot = acpi_thermal_zone_device_hot,
+ .critical = acpi_thermal_zone_device_critical,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 8c1e38c748ec..17518b4cab1b 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -458,7 +458,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
return ret;
}
ctx->cdev = cdev;
- thermal_cdev_update(cdev);
}
return 0;
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c
index 8682cf1e213f..14723896aab2 100644
--- a/drivers/iio/adc/qcom-vadc-common.c
+++ b/drivers/iio/adc/qcom-vadc-common.c
@@ -368,6 +368,28 @@ static int qcom_vadc_map_voltage_temp(const struct vadc_map_pt *pts,
return 0;
}
+static s32 qcom_vadc_map_temp_voltage(const struct vadc_map_pt *pts,
+ u32 tablesize, int input)
+{
+ u32 i = 0;
+
+ /*
+ * Table must be sorted, find the interval of 'y' which contains value
+ * 'input' and map it to proper 'x' value
+ */
+ while (i < tablesize && pts[i].y < input)
+ i++;
+
+ if (i == 0)
+ return pts[0].x;
+ if (i == tablesize)
+ return pts[tablesize - 1].x;
+
+ /* interpolate linearly */
+ return fixp_linear_interpolate(pts[i - 1].y, pts[i - 1].x,
+ pts[i].y, pts[i].x, input);
+}
+
static void qcom_vadc_scale_calib(const struct vadc_linear_graph *calib_graph,
u16 adc_code,
bool absolute,
@@ -463,6 +485,21 @@ static int qcom_vadc_scale_chg_temp(const struct vadc_linear_graph *calib_graph,
return 0;
}
+/* convert voltage to ADC code, using 1.875V reference */
+static u16 qcom_vadc_scale_voltage_code(s32 voltage,
+ const struct vadc_prescale_ratio *prescale,
+ const u32 full_scale_code_volt,
+ unsigned int factor)
+{
+ s64 volt = voltage;
+ s64 adc_vdd_ref_mv = 1875; /* reference voltage */
+
+ volt *= prescale->num * factor * full_scale_code_volt;
+ volt = div64_s64(volt, (s64)prescale->den * adc_vdd_ref_mv * 1000);
+
+ return volt;
+}
+
static int qcom_vadc_scale_code_voltage_factor(u16 adc_code,
const struct vadc_prescale_ratio *prescale,
const struct adc5_data *data,
@@ -627,6 +664,19 @@ int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
}
EXPORT_SYMBOL(qcom_vadc_scale);
+u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
+ u32 full_scale_code_volt, int temp)
+{
+ const struct vadc_prescale_ratio *prescale = &adc5_prescale_ratios[prescale_ratio];
+ s32 voltage;
+
+ voltage = qcom_vadc_map_temp_voltage(adcmap_100k_104ef_104fb_1875_vref,
+ ARRAY_SIZE(adcmap_100k_104ef_104fb_1875_vref),
+ temp);
+ return qcom_vadc_scale_voltage_code(voltage, prescale, full_scale_code_volt, 1000);
+}
+EXPORT_SYMBOL(qcom_adc_tm5_temp_volt_scale);
+
int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
unsigned int prescale_ratio,
const struct adc5_data *data,
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index b6aa6e5514f4..6b8b3ab8db48 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -336,7 +336,8 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
pr_notice("interval changed to: %d\n", interval);
if (thermal)
- thermal->polling_delay = interval*1000;
+ thermal->polling_delay_jiffies =
+ round_jiffies(msecs_to_jiffies(interval * 1000));
prev_interval = interval;
}
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 7edc8dc6bbab..d7f44deab5b1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF
source "drivers/thermal/st/Kconfig"
endmenu
-config TANGO_THERMAL
- tristate "Tango thermal management"
- depends on ARCH_TANGO || COMPILE_TEST
- help
- Enable the Tango thermal driver, which supports the primitive
- temperature sensor embedded in Tango chips since the SMP8758.
- This sensor only generates a 1-bit signal to indicate whether
- the die temperature exceeds a programmable threshold.
-
source "drivers/thermal/tegra/Kconfig"
config GENERIC_ADC_THERMAL
@@ -476,14 +467,6 @@ depends on (ARCH_QCOM && OF) || COMPILE_TEST
source "drivers/thermal/qcom/Kconfig"
endmenu
-config ZX2967_THERMAL
- tristate "Thermal sensors on zx2967 SoC"
- depends on ARCH_ZX || COMPILE_TEST
- help
- Enable the zx2967 thermal sensors driver, which supports
- the primitive temperature sensor embedded in zx2967 SoCs.
- This sensor generates the real time die temperature.
-
config UNIPHIER_THERMAL
tristate "Socionext UniPhier thermal driver"
depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index b64dd50a6629..82fc3e616e54 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -42,7 +42,6 @@ obj-y += samsung/
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
-obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o
@@ -57,7 +56,6 @@ obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
-obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index f5af2571f9b7..10af3341e5ea 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -485,7 +485,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
frequency = get_state_freq(cpufreq_cdev, state);
ret = freq_qos_update_request(&cpufreq_cdev->qos_req, frequency);
- if (ret > 0) {
+ if (ret >= 0) {
cpufreq_cdev->cpufreq_state = state;
cpus = cpufreq_cdev->policy->cpus;
max_capacity = arch_scale_cpu_capacity(cpumask_first(cpus));
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 4d74994f160a..180edec34e07 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -95,7 +95,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
thermal_zone_device_update(thermal->zone,
THERMAL_EVENT_UNSPECIFIED);
- delay = msecs_to_jiffies(thermal->zone->passive_delay);
+ delay = thermal->zone->passive_delay_jiffies;
queue_delayed_work(system_freezable_wq, &thermal->work, delay);
return;
}
@@ -245,7 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev,
"TJUNC temperature polling period set at %d ms\n",
- thermal->zone->passive_delay);
+ jiffies_to_msecs(thermal->zone->passive_delay_jiffies));
ret = platform_get_irq_byname(pdev, "THERMAL");
if (ret < 0) {
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 7a4170a0b51f..92acae53df49 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -258,7 +258,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
* power being applied, slowing down the controller)
*/
d = mul_frac(tz->tzp->k_d, err - params->prev_err);
- d = div_frac(d, tz->passive_delay);
+ d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
params->prev_err = err;
power_range = p + i + d;
@@ -590,13 +590,42 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
}
/**
+ * check_power_actors() - Check all cooling devices and warn when they are
+ * not power actors
+ * @tz: thermal zone to operate on
+ *
+ * Check all cooling devices in the @tz and warn every time they are missing
+ * power actor API. The warning should help to investigate the issue, which
+ * could be e.g. lack of Energy Model for a given device.
+ *
+ * Return: 0 on success, -EINVAL if any cooling device does not implement
+ * the power actor API.
+ */
+static int check_power_actors(struct thermal_zone_device *tz)
+{
+ struct thermal_instance *instance;
+ int ret = 0;
+
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+ if (!cdev_is_power_actor(instance->cdev)) {
+ dev_warn(&tz->device, "power_allocator: %s is not a power actor\n",
+ instance->cdev->type);
+ ret = -EINVAL;
+ }
+ }
+
+ return ret;
+}
+
+/**
* power_allocator_bind() - bind the power_allocator governor to a thermal zone
* @tz: thermal zone to bind it to
*
* Initialize the PID controller parameters and bind it to the thermal
* zone.
*
- * Return: 0 on success, or -ENOMEM if we ran out of memory.
+ * Return: 0 on success, or -ENOMEM if we ran out of memory, or -EINVAL
+ * when there are unsupported cooling devices in the @tz.
*/
static int power_allocator_bind(struct thermal_zone_device *tz)
{
@@ -604,6 +633,10 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
struct power_allocator_params *params;
int control_temp;
+ ret = check_power_actors(tz);
+ if (ret)
+ return ret;
+
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index 2ae7198d3067..12acb12aac50 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -109,7 +109,7 @@ static void update_passive_instance(struct thermal_zone_device *tz,
* If value is +1, activate a passive instance.
* If value is -1, deactivate a passive instance.
*/
- if (type == THERMAL_TRIP_PASSIVE || type == THERMAL_TRIPS_NONE)
+ if (type == THERMAL_TRIP_PASSIVE)
tz->passive += value;
}
@@ -122,13 +122,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
bool throttle = false;
int old_target;
- if (trip == THERMAL_TRIPS_NONE) {
- trip_temp = tz->forced_passive;
- trip_type = THERMAL_TRIPS_NONE;
- } else {
- tz->ops->get_trip_temp(tz, trip, &trip_temp);
- tz->ops->get_trip_type(tz, trip, &trip_type);
- }
+ tz->ops->get_trip_temp(tz, trip, &trip_temp);
+ tz->ops->get_trip_type(tz, trip, &trip_type);
trend = get_tz_trend(tz, trip);
@@ -189,9 +184,6 @@ static int step_wise_throttle(struct thermal_zone_device *tz, int trip)
thermal_zone_trip_update(tz, trip);
- if (tz->forced_passive)
- thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE);
-
mutex_lock(&tz->lock);
list_for_each_entry(instance, &tz->thermal_instances, tz_node)
diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
index 6e479deff76b..d1248ba943a4 100644
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -146,12 +146,18 @@ static int int340x_thermal_get_trip_hyst(struct thermal_zone_device *zone,
return 0;
}
+static void int340x_thermal_critical(struct thermal_zone_device *zone)
+{
+ dev_dbg(&zone->device, "%s: critical temperature reached\n", zone->type);
+}
+
static struct thermal_zone_device_ops int340x_thermal_zone_ops = {
.get_temp = int340x_thermal_get_zone_temp,
.get_trip_temp = int340x_thermal_get_trip_temp,
.get_trip_type = int340x_thermal_get_trip_type,
.set_trip_temp = int340x_thermal_set_trip_temp,
.get_trip_hyst = int340x_thermal_get_trip_hyst,
+ .critical = int340x_thermal_critical,
};
static int int340x_thermal_get_trip_config(acpi_handle handle, char *name,
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index 41723c6c6c0c..527c91f5960b 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -326,10 +326,16 @@ static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *tem
return 0;
}
+static void pch_critical(struct thermal_zone_device *tzd)
+{
+ dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
+}
+
static struct thermal_zone_device_ops tzd_ops = {
.get_temp = pch_thermal_get_temp,
.get_trip_type = pch_get_trip_type,
.get_trip_temp = pch_get_trip_temp,
+ .critical = pch_critical,
};
enum board_ids {
diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c
index 9eadd2d6413e..d35e5313bea4 100644
--- a/drivers/thermal/khadas_mcu_fan.c
+++ b/drivers/thermal/khadas_mcu_fan.c
@@ -100,7 +100,6 @@ static int khadas_mcu_fan_probe(struct platform_device *pdev)
return ret;
}
ctx->cdev = cdev;
- thermal_cdev_update(cdev);
return 0;
}
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index aa9c1d80fae4..8d5ac2df26dc 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -10,6 +10,17 @@ config QCOM_TSENS
Also able to set threshold temperature for both hot and cold and update
when a threshold is reached.
+config QCOM_SPMI_ADC_TM5
+ tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
+ depends on OF && SPMI && IIO
+ select REGMAP_SPMI
+ select QCOM_VADC_COMMON
+ help
+ This enables the thermal driver for the ADC thermal monitoring
+ device. It shows up as a thermal zone with multiple trip points.
+ Thermal client sets threshold temperature for both warm and cool and
+ gets updated when a threshold is reached.
+
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index ec86eef7f6a6..252ea7d9da0b 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
tsens-8960.o
+obj-$(CONFIG_QCOM_SPMI_ADC_TM5) += qcom-spmi-adc-tm5.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
new file mode 100644
index 000000000000..b460b56e981c
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Linaro Limited
+ *
+ * Based on original driver:
+ * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+/*
+ * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
+ * channel is programmed to use one of ADC channels for voltage comparison.
+ * Voltages are programmed using ADC codes, so we have to convert temp to
+ * voltage and then to ADC code value.
+ *
+ * Configuration of TM channels must match configuration of corresponding ADC
+ * channels.
+ */
+
+#define ADC5_MAX_CHANNEL 0xc0
+#define ADC_TM5_NUM_CHANNELS 8
+
+#define ADC_TM5_STATUS_LOW 0x0a
+
+#define ADC_TM5_STATUS_HIGH 0x0b
+
+#define ADC_TM5_NUM_BTM 0x0f
+
+#define ADC_TM5_ADC_DIG_PARAM 0x42
+
+#define ADC_TM5_FAST_AVG_CTL (ADC_TM5_ADC_DIG_PARAM + 1)
+#define ADC_TM5_FAST_AVG_EN BIT(7)
+
+#define ADC_TM5_MEAS_INTERVAL_CTL (ADC_TM5_ADC_DIG_PARAM + 2)
+#define ADC_TM5_TIMER1 3 /* 3.9ms */
+
+#define ADC_TM5_MEAS_INTERVAL_CTL2 (ADC_TM5_ADC_DIG_PARAM + 3)
+#define ADC_TM5_MEAS_INTERVAL_CTL2_MASK 0xf0
+#define ADC_TM5_TIMER2 10 /* 1 second */
+#define ADC_TM5_MEAS_INTERVAL_CTL3_MASK 0xf
+#define ADC_TM5_TIMER3 4 /* 4 second */
+
+#define ADC_TM_EN_CTL1 0x46
+#define ADC_TM_EN BIT(7)
+#define ADC_TM_CONV_REQ 0x47
+#define ADC_TM_CONV_REQ_EN BIT(7)
+
+#define ADC_TM5_M_CHAN_BASE 0x60
+
+#define ADC_TM5_M_ADC_CH_SEL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 0)
+#define ADC_TM5_M_LOW_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 1)
+#define ADC_TM5_M_LOW_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 2)
+#define ADC_TM5_M_HIGH_THR0(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 3)
+#define ADC_TM5_M_HIGH_THR1(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 4)
+#define ADC_TM5_M_MEAS_INTERVAL_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 5)
+#define ADC_TM5_M_CTL(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 6)
+#define ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK 0xf
+#define ADC_TM5_M_CTL_CAL_SEL_MASK 0x30
+#define ADC_TM5_M_CTL_CAL_VAL 0x40
+#define ADC_TM5_M_EN(n) (ADC_TM5_M_CHAN_BASE + ((n) * 8) + 7)
+#define ADC_TM5_M_MEAS_EN BIT(7)
+#define ADC_TM5_M_HIGH_THR_INT_EN BIT(1)
+#define ADC_TM5_M_LOW_THR_INT_EN BIT(0)
+
+enum adc5_timer_select {
+ ADC5_TIMER_SEL_1 = 0,
+ ADC5_TIMER_SEL_2,
+ ADC5_TIMER_SEL_3,
+ ADC5_TIMER_SEL_NONE,
+};
+
+struct adc_tm5_data {
+ const u32 full_scale_code_volt;
+ unsigned int *decimation;
+ unsigned int *hw_settle;
+};
+
+enum adc_tm5_cal_method {
+ ADC_TM5_NO_CAL = 0,
+ ADC_TM5_RATIOMETRIC_CAL,
+ ADC_TM5_ABSOLUTE_CAL
+};
+
+struct adc_tm5_chip;
+
+/**
+ * struct adc_tm5_channel - ADC Thermal Monitoring channel data.
+ * @channel: channel number.
+ * @adc_channel: corresponding ADC channel number.
+ * @cal_method: calibration method.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ * start of conversion.
+ * @iio: IIO channel instance used by this channel.
+ * @chip: ADC TM chip instance.
+ * @tzd: thermal zone device used by this channel.
+ */
+struct adc_tm5_channel {
+ unsigned int channel;
+ unsigned int adc_channel;
+ enum adc_tm5_cal_method cal_method;
+ unsigned int prescale;
+ unsigned int hw_settle_time;
+ struct iio_channel *iio;
+ struct adc_tm5_chip *chip;
+ struct thermal_zone_device *tzd;
+};
+
+/**
+ * struct adc_tm5_chip - ADC Thermal Monitoring properties
+ * @regmap: SPMI ADC5 Thermal Monitoring peripheral register map field.
+ * @dev: SPMI ADC5 device.
+ * @data: software configuration data.
+ * @channels: array of ADC TM channel data.
+ * @nchannels: amount of channels defined/allocated
+ * @decimation: sampling rate supported for the channel.
+ * @avg_samples: ability to provide single result from the ADC
+ * that is an average of multiple measurements.
+ * @base: base address of TM registers.
+ */
+struct adc_tm5_chip {
+ struct regmap *regmap;
+ struct device *dev;
+ const struct adc_tm5_data *data;
+ struct adc_tm5_channel *channels;
+ unsigned int nchannels;
+ unsigned int decimation;
+ unsigned int avg_samples;
+ u16 base;
+};
+
+static const struct adc_tm5_data adc_tm5_data_pmic = {
+ .full_scale_code_volt = 0x70e4,
+ .decimation = (unsigned int []) { 250, 420, 840 },
+ .hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+ 1000, 2000, 4000, 8000, 16000, 32000,
+ 64000, 128000 },
+};
+
+static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+ return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_write(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
+{
+ return regmap_bulk_write(adc_tm->regmap, adc_tm->base + offset, data, len);
+}
+
+static int adc_tm5_reg_update(struct adc_tm5_chip *adc_tm, u16 offset, u8 mask, u8 val)
+{
+ return regmap_write_bits(adc_tm->regmap, adc_tm->base + offset, mask, val);
+}
+
+static irqreturn_t adc_tm5_isr(int irq, void *data)
+{
+ struct adc_tm5_chip *chip = data;
+ u8 status_low, status_high, ctl;
+ int ret, i;
+
+ ret = adc_tm5_read(chip, ADC_TM5_STATUS_LOW, &status_low, sizeof(status_low));
+ if (unlikely(ret)) {
+ dev_err(chip->dev, "read status low failed: %d\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ ret = adc_tm5_read(chip, ADC_TM5_STATUS_HIGH, &status_high, sizeof(status_high));
+ if (unlikely(ret)) {
+ dev_err(chip->dev, "read status high failed: %d\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < chip->nchannels; i++) {
+ bool upper_set = false, lower_set = false;
+ unsigned int ch = chip->channels[i].channel;
+
+ /* No TZD, we warned at the boot time */
+ if (!chip->channels[i].tzd)
+ continue;
+
+ ret = adc_tm5_read(chip, ADC_TM5_M_EN(ch), &ctl, sizeof(ctl));
+ if (unlikely(ret)) {
+ dev_err(chip->dev, "ctl read failed: %d, channel %d\n", ret, i);
+ continue;
+ }
+
+ if (!(ctl & ADC_TM5_M_MEAS_EN))
+ continue;
+
+ lower_set = (status_low & BIT(ch)) &&
+ (ctl & ADC_TM5_M_LOW_THR_INT_EN);
+
+ upper_set = (status_high & BIT(ch)) &&
+ (ctl & ADC_TM5_M_HIGH_THR_INT_EN);
+
+ if (upper_set || lower_set)
+ thermal_zone_device_update(chip->channels[i].tzd,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int adc_tm5_get_temp(void *data, int *temp)
+{
+ struct adc_tm5_channel *channel = data;
+ int ret;
+
+ if (!channel || !channel->iio)
+ return -EINVAL;
+
+ ret = iio_read_channel_processed(channel->iio, temp);
+ if (ret < 0)
+ return ret;
+
+ if (ret != IIO_VAL_INT)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
+{
+ struct adc_tm5_chip *chip = channel->chip;
+ unsigned int reg = ADC_TM5_M_EN(channel->channel);
+
+ return adc_tm5_reg_update(chip, reg,
+ ADC_TM5_M_MEAS_EN |
+ ADC_TM5_M_HIGH_THR_INT_EN |
+ ADC_TM5_M_LOW_THR_INT_EN,
+ 0);
+}
+
+static int adc_tm5_enable(struct adc_tm5_chip *chip)
+{
+ int ret;
+ u8 data;
+
+ data = ADC_TM_EN;
+ ret = adc_tm5_write(chip, ADC_TM_EN_CTL1, &data, sizeof(data));
+ if (ret < 0) {
+ dev_err(chip->dev, "adc-tm enable failed\n");
+ return ret;
+ }
+
+ data = ADC_TM_CONV_REQ_EN;
+ ret = adc_tm5_write(chip, ADC_TM_CONV_REQ, &data, sizeof(data));
+ if (ret < 0) {
+ dev_err(chip->dev, "adc-tm request conversion failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
+{
+ struct adc_tm5_chip *chip = channel->chip;
+ u8 buf[8];
+ u16 reg = ADC_TM5_M_ADC_CH_SEL_CTL(channel->channel);
+ int ret;
+
+ ret = adc_tm5_read(chip, reg, buf, sizeof(buf));
+ if (ret) {
+ dev_err(chip->dev, "channel %d params read failed: %d\n", channel->channel, ret);
+ return ret;
+ }
+
+ buf[0] = channel->adc_channel;
+
+ /* High temperature corresponds to low voltage threshold */
+ if (high != INT_MAX) {
+ u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+ chip->data->full_scale_code_volt, high);
+
+ buf[1] = adc_code & 0xff;
+ buf[2] = adc_code >> 8;
+ buf[7] |= ADC_TM5_M_LOW_THR_INT_EN;
+ } else {
+ buf[7] &= ~ADC_TM5_M_LOW_THR_INT_EN;
+ }
+
+ /* Low temperature corresponds to high voltage threshold */
+ if (low != -INT_MAX) {
+ u16 adc_code = qcom_adc_tm5_temp_volt_scale(channel->prescale,
+ chip->data->full_scale_code_volt, low);
+
+ buf[3] = adc_code & 0xff;
+ buf[4] = adc_code >> 8;
+ buf[7] |= ADC_TM5_M_HIGH_THR_INT_EN;
+ } else {
+ buf[7] &= ~ADC_TM5_M_HIGH_THR_INT_EN;
+ }
+
+ buf[5] = ADC5_TIMER_SEL_2;
+
+ /* Set calibration select, hw_settle delay */
+ buf[6] &= ~ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK;
+ buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_HW_SETTLE_DELAY_MASK, channel->hw_settle_time);
+ buf[6] &= ~ADC_TM5_M_CTL_CAL_SEL_MASK;
+ buf[6] |= FIELD_PREP(ADC_TM5_M_CTL_CAL_SEL_MASK, channel->cal_method);
+
+ buf[7] |= ADC_TM5_M_MEAS_EN;
+
+ ret = adc_tm5_write(chip, reg, buf, sizeof(buf));
+ if (ret) {
+ dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
+ return ret;
+ }
+
+ return adc_tm5_enable(chip);
+}
+
+static int adc_tm5_set_trips(void *data, int low, int high)
+{
+ struct adc_tm5_channel *channel = data;
+ struct adc_tm5_chip *chip;
+ int ret;
+
+ if (!channel)
+ return -EINVAL;
+
+ chip = channel->chip;
+ dev_dbg(chip->dev, "%d:low(mdegC):%d, high(mdegC):%d\n",
+ channel->channel, low, high);
+
+ if (high == INT_MAX && low <= -INT_MAX)
+ ret = adc_tm5_disable_channel(channel);
+ else
+ ret = adc_tm5_configure(channel, low, high);
+
+ return ret;
+}
+
+static struct thermal_zone_of_device_ops adc_tm5_ops = {
+ .get_temp = adc_tm5_get_temp,
+ .set_trips = adc_tm5_set_trips,
+};
+
+static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
+{
+ unsigned int i;
+ struct thermal_zone_device *tzd;
+
+ for (i = 0; i < adc_tm->nchannels; i++) {
+ adc_tm->channels[i].chip = adc_tm;
+
+ tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
+ adc_tm->channels[i].channel,
+ &adc_tm->channels[i],
+ &adc_tm5_ops);
+ if (IS_ERR(tzd)) {
+ dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
+ adc_tm->channels[i].channel, PTR_ERR(tzd));
+ return PTR_ERR(tzd);
+ }
+ adc_tm->channels[i].tzd = tzd;
+ }
+
+ return 0;
+}
+
+static int adc_tm5_init(struct adc_tm5_chip *chip)
+{
+ u8 buf[4], channels_available;
+ int ret;
+ unsigned int i;
+
+ ret = adc_tm5_read(chip, ADC_TM5_NUM_BTM,
+ &channels_available, sizeof(channels_available));
+ if (ret) {
+ dev_err(chip->dev, "read failed for BTM channels\n");
+ return ret;
+ }
+
+ for (i = 0; i < chip->nchannels; i++) {
+ if (chip->channels[i].channel >= channels_available) {
+ dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+ return -EINVAL;
+ }
+ }
+
+ buf[0] = chip->decimation;
+ buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
+ buf[2] = ADC_TM5_TIMER1;
+ buf[3] = FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL2_MASK, ADC_TM5_TIMER2) |
+ FIELD_PREP(ADC_TM5_MEAS_INTERVAL_CTL3_MASK, ADC_TM5_TIMER3);
+
+ ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
+ if (ret) {
+ dev_err(chip->dev, "block write failed: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
+ struct adc_tm5_channel *channel,
+ struct device_node *node)
+{
+ const char *name = node->name;
+ u32 chan, value, varr[2];
+ int ret;
+ struct device *dev = adc_tm->dev;
+ struct of_phandle_args args;
+
+ ret = of_property_read_u32(node, "reg", &chan);
+ if (ret) {
+ dev_err(dev, "%s: invalid channel number %d\n", name, ret);
+ return ret;
+ }
+
+ if (chan >= ADC_TM5_NUM_CHANNELS) {
+ dev_err(dev, "%s: channel number too big: %d\n", name, chan);
+ return -EINVAL;
+ }
+
+ channel->channel = chan;
+
+ /*
+ * We are tied to PMIC's ADC controller, which always use single
+ * argument for channel number. So don't bother parsing
+ * #io-channel-cells, just enforce cell_count = 1.
+ */
+ ret = of_parse_phandle_with_fixed_args(node, "io-channels", 1, 0, &args);
+ if (ret < 0) {
+ dev_err(dev, "%s: error parsing ADC channel number %d: %d\n", name, chan, ret);
+ return ret;
+ }
+ of_node_put(args.np);
+
+ if (args.args_count != 1 || args.args[0] >= ADC5_MAX_CHANNEL) {
+ dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
+ return ret;
+ }
+ channel->adc_channel = args.args[0];
+
+ channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL);
+ if (IS_ERR(channel->iio)) {
+ ret = PTR_ERR(channel->iio);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "%s: error getting channel: %d\n", name, ret);
+ return ret;
+ }
+
+ ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+ if (!ret) {
+ ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
+ if (ret < 0) {
+ dev_err(dev, "%s: invalid pre-scaling <%d %d>\n",
+ name, varr[0], varr[1]);
+ return ret;
+ }
+ channel->prescale = ret;
+ } else {
+ /* 1:1 prescale is index 0 */
+ channel->prescale = 0;
+ }
+
+ ret = of_property_read_u32(node, "qcom,hw-settle-time-us", &value);
+ if (!ret) {
+ ret = qcom_adc5_hw_settle_time_from_dt(value, adc_tm->data->hw_settle);
+ if (ret < 0) {
+ dev_err(dev, "%s invalid hw-settle-time-us %d us\n",
+ name, value);
+ return ret;
+ }
+ channel->hw_settle_time = ret;
+ } else {
+ channel->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+ }
+
+ if (of_property_read_bool(node, "qcom,ratiometric"))
+ channel->cal_method = ADC_TM5_RATIOMETRIC_CAL;
+ else
+ channel->cal_method = ADC_TM5_ABSOLUTE_CAL;
+
+ return 0;
+}
+
+static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
+{
+ struct adc_tm5_channel *channels;
+ struct device_node *child;
+ u32 value;
+ int ret;
+ struct device *dev = adc_tm->dev;
+
+ adc_tm->nchannels = of_get_available_child_count(node);
+ if (!adc_tm->nchannels)
+ return -EINVAL;
+
+ adc_tm->channels = devm_kcalloc(dev, adc_tm->nchannels,
+ sizeof(*adc_tm->channels), GFP_KERNEL);
+ if (!adc_tm->channels)
+ return -ENOMEM;
+
+ channels = adc_tm->channels;
+
+ adc_tm->data = of_device_get_match_data(dev);
+ if (!adc_tm->data)
+ adc_tm->data = &adc_tm5_data_pmic;
+
+ ret = of_property_read_u32(node, "qcom,decimation", &value);
+ if (!ret) {
+ ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
+ if (ret < 0) {
+ dev_err(dev, "invalid decimation %d\n", value);
+ return ret;
+ }
+ adc_tm->decimation = ret;
+ } else {
+ adc_tm->decimation = ADC5_DECIMATION_DEFAULT;
+ }
+
+ ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+ if (!ret) {
+ ret = qcom_adc5_avg_samples_from_dt(value);
+ if (ret < 0) {
+ dev_err(dev, "invalid avg-samples %d\n", value);
+ return ret;
+ }
+ adc_tm->avg_samples = ret;
+ } else {
+ adc_tm->avg_samples = VADC_DEF_AVG_SAMPLES;
+ }
+
+ for_each_available_child_of_node(node, child) {
+ ret = adc_tm5_get_dt_channel_data(adc_tm, channels, child);
+ if (ret) {
+ of_node_put(child);
+ return ret;
+ }
+
+ channels++;
+ }
+
+ return 0;
+}
+
+static int adc_tm5_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct adc_tm5_chip *adc_tm;
+ struct regmap *regmap;
+ int ret, irq;
+ u32 reg;
+
+ regmap = dev_get_regmap(dev->parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ ret = of_property_read_u32(node, "reg", &reg);
+ if (ret)
+ return ret;
+
+ adc_tm = devm_kzalloc(&pdev->dev, sizeof(*adc_tm), GFP_KERNEL);
+ if (!adc_tm)
+ return -ENOMEM;
+
+ adc_tm->regmap = regmap;
+ adc_tm->dev = dev;
+ adc_tm->base = reg;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "get_irq failed: %d\n", irq);
+ return irq;
+ }
+
+ ret = adc_tm5_get_dt_data(adc_tm, node);
+ if (ret) {
+ dev_err(dev, "get dt data failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = adc_tm5_init(adc_tm);
+ if (ret) {
+ dev_err(dev, "adc-tm init failed\n");
+ return ret;
+ }
+
+ ret = adc_tm5_register_tzd(adc_tm);
+ if (ret) {
+ dev_err(dev, "tzd register failed\n");
+ return ret;
+ }
+
+ return devm_request_threaded_irq(dev, irq, NULL, adc_tm5_isr,
+ IRQF_ONESHOT, "pm-adc-tm5", adc_tm);
+}
+
+static const struct of_device_id adc_tm5_match_table[] = {
+ {
+ .compatible = "qcom,spmi-adc-tm5",
+ .data = &adc_tm5_data_pmic,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
+
+static struct platform_driver adc_tm5_driver = {
+ .driver = {
+ .name = "qcom-spmi-adc-tm5",
+ .of_match_table = adc_tm5_match_table,
+ },
+ .probe = adc_tm5_probe,
+};
+module_platform_driver(adc_tm5_driver);
+
+MODULE_DESCRIPTION("SPMI PMIC Thermal Monitor ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c
deleted file mode 100644
index 304b461e12aa..000000000000
--- a/drivers/thermal/tango_thermal.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/thermal.h>
-#include <linux/platform_device.h>
-
-/*
- * According to a data sheet draft, "this temperature sensor uses a bandgap
- * type of circuit to compare a voltage which has a negative temperature
- * coefficient with a voltage that is proportional to absolute temperature.
- * A resistor bank allows 41 different temperature thresholds to be selected
- * and the logic output will then indicate whether the actual die temperature
- * lies above or below the selected threshold."
- */
-
-#define TEMPSI_CMD 0
-#define TEMPSI_RES 4
-#define TEMPSI_CFG 8
-
-#define CMD_OFF 0
-#define CMD_ON 1
-#define CMD_READ 2
-
-#define IDX_MIN 15
-#define IDX_MAX 40
-
-struct tango_thermal_priv {
- void __iomem *base;
- int thresh_idx;
-};
-
-static bool temp_above_thresh(void __iomem *base, int thresh_idx)
-{
- writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
- usleep_range(10, 20);
- writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
-
- return readl(base + TEMPSI_RES);
-}
-
-static int tango_get_temp(void *arg, int *res)
-{
- struct tango_thermal_priv *priv = arg;
- int idx = priv->thresh_idx;
-
- if (temp_above_thresh(priv->base, idx)) {
- /* Search upward by incrementing thresh_idx */
- while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
- cpu_relax();
- idx = idx - 1; /* always return lower bound */
- } else {
- /* Search downward by decrementing thresh_idx */
- while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
- cpu_relax();
- }
-
- *res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
- priv->thresh_idx = idx;
-
- return 0;
-}
-
-static const struct thermal_zone_of_device_ops ops = {
- .get_temp = tango_get_temp,
-};
-
-static void tango_thermal_init(struct tango_thermal_priv *priv)
-{
- writel(0, priv->base + TEMPSI_CFG);
- writel(CMD_ON, priv->base + TEMPSI_CMD);
-}
-
-static int tango_thermal_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct tango_thermal_priv *priv;
- struct thermal_zone_device *tzdev;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- platform_set_drvdata(pdev, priv);
- priv->thresh_idx = IDX_MIN;
- tango_thermal_init(priv);
-
- tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
- return PTR_ERR_OR_ZERO(tzdev);
-}
-
-static int __maybe_unused tango_thermal_resume(struct device *dev)
-{
- tango_thermal_init(dev_get_drvdata(dev));
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
-
-static const struct of_device_id tango_sensor_ids[] = {
- {
- .compatible = "sigma,smp8758-thermal",
- },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, tango_sensor_ids);
-
-static struct platform_driver tango_thermal_driver = {
- .probe = tango_thermal_probe,
- .driver = {
- .name = "tango-thermal",
- .of_match_table = tango_sensor_ids,
- .pm = &tango_thermal_pm,
- },
-};
-
-module_platform_driver(tango_thermal_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sigma Designs");
-MODULE_DESCRIPTION("Tango temperature sensor");
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 4a291d205d5c..996c038f83a4 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -289,16 +289,11 @@ static int __init thermal_register_governors(void)
* - Critical trip point will cause a system shutdown.
*/
static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
- int delay)
+ unsigned long delay)
{
- if (delay > 1000)
+ if (delay)
mod_delayed_work(system_freezable_power_efficient_wq,
- &tz->poll_queue,
- round_jiffies(msecs_to_jiffies(delay)));
- else if (delay)
- mod_delayed_work(system_freezable_power_efficient_wq,
- &tz->poll_queue,
- msecs_to_jiffies(delay));
+ &tz->poll_queue, delay);
else
cancel_delayed_work(&tz->poll_queue);
}
@@ -317,9 +312,9 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz)
mutex_lock(&tz->lock);
if (!stop && tz->passive)
- thermal_zone_device_set_polling(tz, tz->passive_delay);
- else if (!stop && tz->polling_delay)
- thermal_zone_device_set_polling(tz, tz->polling_delay);
+ thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
+ else if (!stop && tz->polling_delay_jiffies)
+ thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
else
thermal_zone_device_set_polling(tz, 0);
@@ -412,9 +407,6 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
trace_thermal_zone_trip(tz, trip, trip_type);
- if (tz->ops->notify)
- tz->ops->notify(tz, trip, trip_type);
-
if (trip_type == THERMAL_TRIP_HOT && tz->ops->hot)
tz->ops->hot(tz);
else if (trip_type == THERMAL_TRIP_CRITICAL)
@@ -486,12 +478,6 @@ static void thermal_zone_device_init(struct thermal_zone_device *tz)
pos->initialized = false;
}
-static void thermal_zone_device_reset(struct thermal_zone_device *tz)
-{
- tz->passive = 0;
- thermal_zone_device_init(tz);
-}
-
static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
enum thermal_device_mode mode)
{
@@ -601,26 +587,6 @@ static void thermal_zone_device_check(struct work_struct *work)
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
}
-void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz,
- const char *cdev_type, size_t size)
-{
- struct thermal_cooling_device *cdev = NULL;
-
- mutex_lock(&thermal_list_lock);
- list_for_each_entry(cdev, &thermal_cdev_list, node) {
- /* skip non matching cdevs */
- if (strncmp(cdev_type, cdev->type, size))
- continue;
-
- /* re binding the exception matching the type pattern */
- thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev,
- THERMAL_NO_LIMIT,
- THERMAL_NO_LIMIT,
- THERMAL_WEIGHT_DEFAULT);
- }
- mutex_unlock(&thermal_list_lock);
-}
-
int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
void *data)
{
@@ -688,23 +654,6 @@ struct thermal_zone_device *thermal_zone_get_by_id(int id)
return match;
}
-void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz,
- const char *cdev_type, size_t size)
-{
- struct thermal_cooling_device *cdev = NULL;
-
- mutex_lock(&thermal_list_lock);
- list_for_each_entry(cdev, &thermal_cdev_list, node) {
- /* skip non matching cdevs */
- if (strncmp(cdev_type, cdev->type, size))
- continue;
- /* unbinding the exception matching the type pattern */
- thermal_zone_unbind_cooling_device(tz, THERMAL_TRIPS_NONE,
- cdev);
- }
- mutex_unlock(&thermal_list_lock);
-}
-
/*
* Device management section: cooling devices, zones devices, and binding
*
@@ -750,7 +699,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
unsigned long max_state;
int result, ret;
- if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
+ if (trip >= tz->trips || trip < 0)
return -EINVAL;
list_for_each_entry(pos1, &thermal_tz_list, node) {
@@ -1352,8 +1301,9 @@ thermal_zone_device_register(const char *type, int trips, int mask,
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
- tz->passive_delay = passive_delay;
- tz->polling_delay = polling_delay;
+
+ thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
+ thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
/* sys I/F */
/* Add nodes that are always present via .groups */
@@ -1407,7 +1357,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check);
- thermal_zone_device_reset(tz);
+ thermal_zone_device_init(tz);
/* Update the new thermal zone and mark it as already updated. */
if (atomic_cmpxchg(&tz->need_update, 1, 0))
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 8df600fa7b79..86b8cef7310e 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -65,6 +65,8 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
cdev->ops->power2state;
}
+void thermal_cdev_update(struct thermal_cooling_device *);
+
/**
* struct thermal_trip - representation of a point in temperature domain
* @np: pointer to struct device_node that this trip point was created from
@@ -118,15 +120,12 @@ struct thermal_instance {
int thermal_register_governor(struct thermal_governor *);
void thermal_unregister_governor(struct thermal_governor *);
-void thermal_zone_device_rebind_exception(struct thermal_zone_device *,
- const char *, size_t);
-void thermal_zone_device_unbind_exception(struct thermal_zone_device *,
- const char *, size_t);
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
int thermal_build_list_of_policies(char *buf);
/* Helpers */
void thermal_zone_set_trips(struct thermal_zone_device *tz);
+void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms);
/* sysfs I/F */
int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index c94bc824e5d3..7f50f412e02a 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -175,6 +175,13 @@ exit:
mutex_unlock(&tz->lock);
}
+void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms)
+{
+ *delay_jiffies = msecs_to_jiffies(delay_ms);
+ if (delay_ms > 1000)
+ *delay_jiffies = round_jiffies(*delay_jiffies);
+}
+
static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
int target)
{
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 0866e949339b..345917a58f2f 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -217,49 +217,6 @@ trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
}
static ssize_t
-passive_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct thermal_zone_device *tz = to_thermal_zone(dev);
- int state;
-
- if (sscanf(buf, "%d\n", &state) != 1)
- return -EINVAL;
-
- /* sanity check: values below 1000 millicelcius don't make sense
- * and can cause the system to go into a thermal heart attack
- */
- if (state && state < 1000)
- return -EINVAL;
-
- if (state && !tz->forced_passive) {
- if (!tz->passive_delay)
- tz->passive_delay = 1000;
- thermal_zone_device_rebind_exception(tz, "Processor",
- sizeof("Processor"));
- } else if (!state && tz->forced_passive) {
- tz->passive_delay = 0;
- thermal_zone_device_unbind_exception(tz, "Processor",
- sizeof("Processor"));
- }
-
- tz->forced_passive = state;
-
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- return count;
-}
-
-static ssize_t
-passive_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct thermal_zone_device *tz = to_thermal_zone(dev);
-
- return sprintf(buf, "%d\n", tz->forced_passive);
-}
-
-static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -403,7 +360,6 @@ static DEVICE_ATTR_RW(sustainable_power);
/* These thermal zone device attributes are created based on conditions */
static DEVICE_ATTR_RW(mode);
-static DEVICE_ATTR_RW(passive);
/* These attributes are unconditionally added to a thermal zone */
static struct attribute *thermal_zone_dev_attrs[] = {
@@ -438,45 +394,9 @@ static const struct attribute_group thermal_zone_mode_attribute_group = {
.attrs = thermal_zone_mode_attrs,
};
-/* We expose passive only if passive trips are present */
-static struct attribute *thermal_zone_passive_attrs[] = {
- &dev_attr_passive.attr,
- NULL,
-};
-
-static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
- struct attribute *attr,
- int attrno)
-{
- struct device *dev = kobj_to_dev(kobj);
- struct thermal_zone_device *tz;
- enum thermal_trip_type trip_type;
- int count, passive = 0;
-
- tz = container_of(dev, struct thermal_zone_device, device);
-
- for (count = 0; count < tz->trips && !passive; count++) {
- tz->ops->get_trip_type(tz, count, &trip_type);
-
- if (trip_type == THERMAL_TRIP_PASSIVE)
- passive = 1;
- }
-
- if (!passive)
- return attr->mode;
-
- return 0;
-}
-
-static const struct attribute_group thermal_zone_passive_attribute_group = {
- .attrs = thermal_zone_passive_attrs,
- .is_visible = thermal_zone_passive_is_visible,
-};
-
static const struct attribute_group *thermal_zone_attribute_groups[] = {
&thermal_zone_attribute_group,
&thermal_zone_mode_attribute_group,
- &thermal_zone_passive_attribute_group,
/* This is not NULL terminated as we create the group dynamically */
};
@@ -955,10 +875,7 @@ trip_point_show(struct device *dev, struct device_attribute *attr, char *buf)
instance =
container_of(attr, struct thermal_instance, attr);
- if (instance->trip == THERMAL_TRIPS_NONE)
- return sprintf(buf, "-1\n");
- else
- return sprintf(buf, "%d\n", instance->trip);
+ return sprintf(buf, "%d\n", instance->trip);
}
ssize_t
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
index fdb8a495ab69..b4ef7340ac9b 100644
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = {
.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
};
@@ -58,7 +58,8 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = {
const struct ti_bandgap_data omap4430_data = {
.features = TI_BANDGAP_FEATURE_MODE_CONFIG |
TI_BANDGAP_FEATURE_CLK_CTRL |
- TI_BANDGAP_FEATURE_POWER_SWITCH,
+ TI_BANDGAP_FEATURE_POWER_SWITCH |
+ TI_BANDGAP_FEATURE_CONT_MODE_ONLY,
.fclock_name = "bandgap_fclk",
.div_ck_name = "bandgap_fclk",
.conv_table = omap4430_adc_to_temp,
@@ -96,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = {
.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
.counter_mask = OMAP4460_COUNTER_MASK,
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
index 9a3955c3853b..c63f439e01d6 100644
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -40,7 +40,7 @@
/* OMAP4430.TEMP_SENSOR bits */
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
-#define OMAP4430_SINGLE_MODE_MASK BIT(10)
+#define OMAP4430_CONTINUOUS_MODE_MASK BIT(10)
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
@@ -113,7 +113,7 @@
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* OMAP4460.BANDGAP_CTRL bits */
-#define OMAP4460_SINGLE_MODE_MASK BIT(31)
+#define OMAP4460_CONTINUOUS_MODE_MASK BIT(31)
#define OMAP4460_MASK_HOT_MASK BIT(1)
#define OMAP4460_MASK_COLD_MASK BIT(0)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index dcac99f327b0..8a3646e26ddd 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -26,6 +26,7 @@
#include <linux/of_platform.h>
#include <linux/of_irq.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/cpu_pm.h>
#include <linux/device.h>
#include <linux/pm_runtime.h>
@@ -602,35 +603,40 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
- u32 counter = 1000;
- struct temp_sensor_registers *tsr;
-
- /* Select single conversion mode */
- if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
- RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+ struct temp_sensor_registers *tsr = bgp->conf->sensors[id].registers;
+ void __iomem *temp_sensor_ctrl = bgp->base + tsr->temp_sensor_ctrl;
+ int error;
+ u32 val;
+
+ /* Select continuous or single conversion mode */
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
+ if (TI_BANDGAP_HAS(bgp, CONT_MODE_ONLY))
+ RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 1);
+ else
+ RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+ }
- /* Start of Conversion = 1 */
- RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
+ /* Set Start of Conversion if available */
+ if (tsr->bgap_soc_mask) {
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
- /* Wait for EOCZ going up */
- tsr = bgp->conf->sensors[id].registers;
+ /* Wait for EOCZ going up */
+ error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
+ val & tsr->bgap_eocz_mask,
+ 1, 1000);
+ if (error)
+ dev_warn(bgp->dev, "eocz timed out waiting high\n");
- while (--counter) {
- if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
- tsr->bgap_eocz_mask)
- break;
+ /* Clear Start of Conversion if available */
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
}
- /* Start of Conversion = 0 */
- RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
-
- /* Wait for EOCZ going down */
- counter = 1000;
- while (--counter) {
- if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
- tsr->bgap_eocz_mask))
- break;
- }
+ /* Wait for EOCZ going down, always needed even if no bgap_soc_mask */
+ error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
+ !(val & tsr->bgap_eocz_mask),
+ 1, 1500);
+ if (error)
+ dev_warn(bgp->dev, "eocz timed out waiting low\n");
return 0;
}
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index ed0ea4b17b25..1f4bbaf31675 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -280,6 +280,7 @@ struct ti_temp_sensor {
* has Errata 814
* TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
* inaccurate.
+ * TI_BANDGAP_FEATURE_CONT_MODE_ONLY - used when single mode hangs the sensor
* TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
* specific feature (above) or not. Return non-zero, if yes.
*/
@@ -295,6 +296,7 @@ struct ti_temp_sensor {
#define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9)
#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10)
#define TI_BANDGAP_FEATURE_UNRELIABLE BIT(11)
+#define TI_BANDGAP_FEATURE_CONT_MODE_ONLY BIT(12)
#define TI_BANDGAP_HAS(b, f) \
((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 2ce4b19f312a..f84375865c97 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -166,6 +166,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
char *domain)
{
struct ti_thermal_data *data;
+ int interval;
data = ti_bandgap_get_sensor_data(bgp, id);
@@ -183,9 +184,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
return PTR_ERR(data->ti_thermal);
}
+ interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
+
ti_bandgap_set_sensor_data(bgp, id, data);
- ti_bandgap_write_update_interval(bgp, data->sensor_id,
- data->ti_thermal->polling_delay);
+ ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
return 0;
}
diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
deleted file mode 100644
index 8e3a2d3c2f9a..000000000000
--- a/drivers/thermal/zx2967_thermal.c
+++ /dev/null
@@ -1,256 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ZTE's zx2967 family thermal sensor driver
- *
- * Copyright (C) 2017 ZTE Ltd.
- *
- * Author: Baoyou Xie <baoyou.xie@linaro.org>
- */
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/thermal.h>
-
-/* Power Mode: 0->low 1->high */
-#define ZX2967_THERMAL_POWER_MODE 0
-#define ZX2967_POWER_MODE_LOW 0
-#define ZX2967_POWER_MODE_HIGH 1
-
-/* DCF Control Register */
-#define ZX2967_THERMAL_DCF 0x4
-#define ZX2967_DCF_EN BIT(1)
-#define ZX2967_DCF_FREEZE BIT(0)
-
-/* Selection Register */
-#define ZX2967_THERMAL_SEL 0x8
-
-/* Control Register */
-#define ZX2967_THERMAL_CTRL 0x10
-
-#define ZX2967_THERMAL_READY BIT(12)
-#define ZX2967_THERMAL_TEMP_MASK GENMASK(11, 0)
-#define ZX2967_THERMAL_ID_MASK 0x18
-#define ZX2967_THERMAL_ID 0x10
-
-#define ZX2967_GET_TEMP_TIMEOUT_US (100 * 1024)
-
-/**
- * struct zx2967_thermal_priv - zx2967 thermal sensor private structure
- * @tzd: struct thermal_zone_device where the sensor is registered
- * @lock: prevents read sensor in parallel
- * @clk_topcrm: topcrm clk structure
- * @clk_apb: apb clk structure
- * @regs: pointer to base address of the thermal sensor
- * @dev: struct device pointer
- */
-
-struct zx2967_thermal_priv {
- struct thermal_zone_device *tzd;
- struct mutex lock;
- struct clk *clk_topcrm;
- struct clk *clk_apb;
- void __iomem *regs;
- struct device *dev;
-};
-
-static int zx2967_thermal_get_temp(void *data, int *temp)
-{
- void __iomem *regs;
- struct zx2967_thermal_priv *priv = data;
- u32 val;
- int ret;
-
- if (!priv->tzd)
- return -EAGAIN;
-
- regs = priv->regs;
- mutex_lock(&priv->lock);
- writel_relaxed(ZX2967_POWER_MODE_LOW,
- regs + ZX2967_THERMAL_POWER_MODE);
- writel_relaxed(ZX2967_DCF_EN, regs + ZX2967_THERMAL_DCF);
-
- val = readl_relaxed(regs + ZX2967_THERMAL_SEL);
- val &= ~ZX2967_THERMAL_ID_MASK;
- val |= ZX2967_THERMAL_ID;
- writel_relaxed(val, regs + ZX2967_THERMAL_SEL);
-
- /*
- * Must wait for a while, surely it's a bit odd.
- * otherwise temperature value we got has a few deviation, even if
- * the THERMAL_READY bit is set.
- */
- usleep_range(100, 300);
- ret = readx_poll_timeout(readl, regs + ZX2967_THERMAL_CTRL,
- val, val & ZX2967_THERMAL_READY, 300,
- ZX2967_GET_TEMP_TIMEOUT_US);
- if (ret) {
- dev_err(priv->dev, "Thermal sensor data timeout\n");
- goto unlock;
- }
-
- writel_relaxed(ZX2967_DCF_FREEZE | ZX2967_DCF_EN,
- regs + ZX2967_THERMAL_DCF);
- val = readl_relaxed(regs + ZX2967_THERMAL_CTRL)
- & ZX2967_THERMAL_TEMP_MASK;
- writel_relaxed(ZX2967_POWER_MODE_HIGH,
- regs + ZX2967_THERMAL_POWER_MODE);
-
- /*
- * Calculate temperature
- * In dts, slope is multiplied by 1000.
- */
- *temp = DIV_ROUND_CLOSEST(((s32)val + priv->tzd->tzp->offset) * 1000,
- priv->tzd->tzp->slope);
-
-unlock:
- mutex_unlock(&priv->lock);
- return ret;
-}
-
-static const struct thermal_zone_of_device_ops zx2967_of_thermal_ops = {
- .get_temp = zx2967_thermal_get_temp,
-};
-
-static int zx2967_thermal_probe(struct platform_device *pdev)
-{
- struct zx2967_thermal_priv *priv;
- struct resource *res;
- int ret;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv->regs))
- return PTR_ERR(priv->regs);
-
- priv->clk_topcrm = devm_clk_get(&pdev->dev, "topcrm");
- if (IS_ERR(priv->clk_topcrm)) {
- ret = PTR_ERR(priv->clk_topcrm);
- dev_err(&pdev->dev, "failed to get topcrm clock: %d\n", ret);
- return ret;
- }
-
- ret = clk_prepare_enable(priv->clk_topcrm);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable topcrm clock: %d\n",
- ret);
- return ret;
- }
-
- priv->clk_apb = devm_clk_get(&pdev->dev, "apb");
- if (IS_ERR(priv->clk_apb)) {
- ret = PTR_ERR(priv->clk_apb);
- dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret);
- goto disable_clk_topcrm;
- }
-
- ret = clk_prepare_enable(priv->clk_apb);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable apb clock: %d\n",
- ret);
- goto disable_clk_topcrm;
- }
-
- mutex_init(&priv->lock);
- priv->tzd = thermal_zone_of_sensor_register(&pdev->dev,
- 0, priv, &zx2967_of_thermal_ops);
-
- if (IS_ERR(priv->tzd)) {
- ret = PTR_ERR(priv->tzd);
- dev_err(&pdev->dev, "failed to register sensor: %d\n", ret);
- goto disable_clk_all;
- }
-
- if (priv->tzd->tzp->slope == 0) {
- thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
- dev_err(&pdev->dev, "coefficients of sensor is invalid\n");
- ret = -EINVAL;
- goto disable_clk_all;
- }
-
- priv->dev = &pdev->dev;
- platform_set_drvdata(pdev, priv);
-
- return 0;
-
-disable_clk_all:
- clk_disable_unprepare(priv->clk_apb);
-disable_clk_topcrm:
- clk_disable_unprepare(priv->clk_topcrm);
- return ret;
-}
-
-static int zx2967_thermal_exit(struct platform_device *pdev)
-{
- struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
-
- thermal_zone_of_sensor_unregister(&pdev->dev, priv->tzd);
- clk_disable_unprepare(priv->clk_topcrm);
- clk_disable_unprepare(priv->clk_apb);
-
- return 0;
-}
-
-static const struct of_device_id zx2967_thermal_id_table[] = {
- { .compatible = "zte,zx296718-thermal" },
- {}
-};
-MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table);
-
-#ifdef CONFIG_PM_SLEEP
-static int zx2967_thermal_suspend(struct device *dev)
-{
- struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
-
- if (priv && priv->clk_topcrm)
- clk_disable_unprepare(priv->clk_topcrm);
-
- if (priv && priv->clk_apb)
- clk_disable_unprepare(priv->clk_apb);
-
- return 0;
-}
-
-static int zx2967_thermal_resume(struct device *dev)
-{
- struct zx2967_thermal_priv *priv = dev_get_drvdata(dev);
- int error;
-
- error = clk_prepare_enable(priv->clk_topcrm);
- if (error)
- return error;
-
- error = clk_prepare_enable(priv->clk_apb);
- if (error) {
- clk_disable_unprepare(priv->clk_topcrm);
- return error;
- }
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops,
- zx2967_thermal_suspend, zx2967_thermal_resume);
-
-static struct platform_driver zx2967_thermal_driver = {
- .probe = zx2967_thermal_probe,
- .remove = zx2967_thermal_exit,
- .driver = {
- .name = "zx2967_thermal",
- .of_match_table = zx2967_thermal_id_table,
- .pm = &zx2967_thermal_pm_ops,
- },
-};
-module_platform_driver(zx2967_thermal_driver);
-
-MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
-MODULE_DESCRIPTION("ZTE zx2967 thermal driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/adc/qcom-vadc-common.h b/include/linux/iio/adc/qcom-vadc-common.h
index 58216124d89d..33f60f43e1aa 100644
--- a/include/linux/iio/adc/qcom-vadc-common.h
+++ b/include/linux/iio/adc/qcom-vadc-common.h
@@ -158,6 +158,9 @@ int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
const struct adc5_data *data,
u16 adc_code, int *result_mdec);
+u16 qcom_adc_tm5_temp_volt_scale(unsigned int prescale_ratio,
+ u32 full_scale_code_volt, int temp);
+
int qcom_adc5_prescaling_from_dt(u32 num, u32 den);
int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle);
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 31b84404f047..6ac7bb1d2b1f 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -17,7 +17,6 @@
#include <linux/workqueue.h>
#include <uapi/linux/thermal.h>
-#define THERMAL_TRIPS_NONE -1
#define THERMAL_MAX_TRIPS 12
/* invalid cooling state */
@@ -77,8 +76,6 @@ struct thermal_zone_device_ops {
int (*set_emul_temp) (struct thermal_zone_device *, int);
int (*get_trend) (struct thermal_zone_device *, int,
enum thermal_trend *);
- int (*notify) (struct thermal_zone_device *, int,
- enum thermal_trip_type);
void (*hot)(struct thermal_zone_device *);
void (*critical)(struct thermal_zone_device *);
};
@@ -118,9 +115,9 @@ struct thermal_cooling_device {
* @devdata: private pointer for device private data
* @trips: number of trip points the thermal zone supports
* @trips_disabled; bitmap for disabled trips
- * @passive_delay: number of milliseconds to wait between polls when
+ * @passive_delay_jiffies: number of jiffies to wait between polls when
* performing passive cooling.
- * @polling_delay: number of milliseconds to wait between polls when
+ * @polling_delay_jiffies: number of jiffies to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
* @temperature: current temperature. This is only for core code,
@@ -133,9 +130,6 @@ struct thermal_cooling_device {
trip point.
* @prev_high_trip: the above current temperature if you've crossed a
passive trip point.
- * @forced_passive: If > 0, temperature at which to switch on all ACPI
- * processor cooling devices. Currently only used by the
- * step-wise governor.
* @need_update: if equals 1, thermal_zone_device_update needs to be invoked.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
@@ -161,15 +155,14 @@ struct thermal_zone_device {
void *devdata;
int trips;
unsigned long trips_disabled; /* bitmap for disabled trips */
- int passive_delay;
- int polling_delay;
+ unsigned long passive_delay_jiffies;
+ unsigned long polling_delay_jiffies;
int temperature;
int last_temperature;
int emul_temperature;
int passive;
int prev_low_trip;
int prev_high_trip;
- unsigned int forced_passive;
atomic_t need_update;
struct thermal_zone_device_ops *ops;
struct thermal_zone_params *tzp;
@@ -397,7 +390,6 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
int thermal_zone_get_slope(struct thermal_zone_device *tz);
int thermal_zone_get_offset(struct thermal_zone_device *tz);
-void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
int thermal_zone_device_enable(struct thermal_zone_device *tz);
int thermal_zone_device_disable(struct thermal_zone_device *tz);
@@ -444,8 +436,6 @@ static inline int thermal_zone_get_offset(
struct thermal_zone_device *tz)
{ return -ENODEV; }
-static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
-{ }
static inline void thermal_notify_framework(struct thermal_zone_device *tz,
int trip)
{ }