summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2018-10-23 20:55:35 +0300
committerDavid S. Miller <davem@davemloft.net>2018-10-23 20:55:35 +0300
commit6b7a02f7089b223317bf264b8fdfdaf74be35b5f (patch)
tree52f5d7e199ab7b77ef6c22be72a3b680899a6863
parent487e2e22ab7968f2c0c82f37b5ca5883efd1a354 (diff)
parent8d5b0bf611ec5b7618d5b772dddc93b8afa78cb8 (diff)
downloadlinux-6b7a02f7089b223317bf264b8fdfdaf74be35b5f.tar.xz
Merge branch 'netsec-fixes'
Masahisa Kojima says: ==================== Bugfix for the netsec driver This patch series include bugfix for the netsec ethernet controller driver, fix the problem in interface down/up. changes in v2: - change the place to perform the PHY power down - use the MACROs defiend in include/uapi/linux/mii.h - update commit comment ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/socionext/netsec.c40
1 files changed, 34 insertions, 6 deletions
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 4289ccb26e4e..d9d0d03e4ce7 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -274,6 +274,7 @@ struct netsec_priv {
struct clk *clk;
u32 msg_enable;
u32 freq;
+ u32 phy_addr;
bool rx_cksum_offload_flag;
};
@@ -431,9 +432,12 @@ static int netsec_mac_update_to_phy_state(struct netsec_priv *priv)
return 0;
}
+static int netsec_phy_read(struct mii_bus *bus, int phy_addr, int reg_addr);
+
static int netsec_phy_write(struct mii_bus *bus,
int phy_addr, int reg, u16 val)
{
+ int status;
struct netsec_priv *priv = bus->priv;
if (netsec_mac_write(priv, GMAC_REG_GDR, val))
@@ -446,8 +450,19 @@ static int netsec_phy_write(struct mii_bus *bus,
GMAC_REG_SHIFT_CR_GAR)))
return -ETIMEDOUT;
- return netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
- NETSEC_GMAC_GAR_REG_GB);
+ status = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR,
+ NETSEC_GMAC_GAR_REG_GB);
+
+ /* Developerbox implements RTL8211E PHY and there is
+ * a compatibility problem with F_GMAC4.
+ * RTL8211E expects MDC clock must be kept toggling for several
+ * clock cycle with MDIO high before entering the IDLE state.
+ * To meet this requirement, netsec driver needs to issue dummy
+ * read(e.g. read PHYID1(offset 0x2) register) right after write.
+ */
+ netsec_phy_read(bus, phy_addr, MII_PHYSID1);
+
+ return status;
}
static int netsec_phy_read(struct mii_bus *bus, int phy_addr, int reg_addr)
@@ -940,6 +955,9 @@ static void netsec_uninit_pkt_dring(struct netsec_priv *priv, int id)
dring->head = 0;
dring->tail = 0;
dring->pkt_cnt = 0;
+
+ if (id == NETSEC_RING_TX)
+ netdev_reset_queue(priv->ndev);
}
static void netsec_free_dring(struct netsec_priv *priv, int id)
@@ -1343,11 +1361,11 @@ static int netsec_netdev_stop(struct net_device *ndev)
netsec_uninit_pkt_dring(priv, NETSEC_RING_TX);
netsec_uninit_pkt_dring(priv, NETSEC_RING_RX);
- ret = netsec_reset_hardware(priv, false);
-
phy_stop(ndev->phydev);
phy_disconnect(ndev->phydev);
+ ret = netsec_reset_hardware(priv, false);
+
pm_runtime_put_sync(priv->dev);
return ret;
@@ -1357,6 +1375,7 @@ static int netsec_netdev_init(struct net_device *ndev)
{
struct netsec_priv *priv = netdev_priv(ndev);
int ret;
+ u16 data;
ret = netsec_alloc_dring(priv, NETSEC_RING_TX);
if (ret)
@@ -1366,6 +1385,11 @@ static int netsec_netdev_init(struct net_device *ndev)
if (ret)
goto err1;
+ /* set phy power down */
+ data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) |
+ BMCR_PDOWN;
+ netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+
ret = netsec_reset_hardware(priv, true);
if (ret)
goto err2;
@@ -1415,7 +1439,7 @@ static const struct net_device_ops netsec_netdev_ops = {
};
static int netsec_of_probe(struct platform_device *pdev,
- struct netsec_priv *priv)
+ struct netsec_priv *priv, u32 *phy_addr)
{
priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (!priv->phy_np) {
@@ -1423,6 +1447,8 @@ static int netsec_of_probe(struct platform_device *pdev,
return -EINVAL;
}
+ *phy_addr = of_mdio_parse_addr(&pdev->dev, priv->phy_np);
+
priv->clk = devm_clk_get(&pdev->dev, NULL); /* get by 'phy_ref_clk' */
if (IS_ERR(priv->clk)) {
dev_err(&pdev->dev, "phy_ref_clk not found\n");
@@ -1623,12 +1649,14 @@ static int netsec_probe(struct platform_device *pdev)
}
if (dev_of_node(&pdev->dev))
- ret = netsec_of_probe(pdev, priv);
+ ret = netsec_of_probe(pdev, priv, &phy_addr);
else
ret = netsec_acpi_probe(pdev, priv, &phy_addr);
if (ret)
goto free_ndev;
+ priv->phy_addr = phy_addr;
+
if (!priv->freq) {
dev_err(&pdev->dev, "missing PHY reference clock frequency\n");
ret = -ENODEV;