summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBrian Norris <computersforpeace@gmail.com>2015-05-13 02:28:21 +0300
committerTejun Heo <tj@kernel.org>2015-05-25 03:11:25 +0300
commit766a2d9796327b9fe7581b51601c15dec5082885 (patch)
treee0c2bcc7c6a65ed144387a069b9099acabae2b46
parente3e694f8217ecff7f6f6f3e9d98a32b235161b49 (diff)
downloadlinux-766a2d9796327b9fe7581b51601c15dec5082885.tar.xz
ata: add Broadcom AHCI SATA3 driver for STB chips
Pretty straightforward driver, using the nice library-ization of the generic ahci_platform driver. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-rw-r--r--drivers/ata/Kconfig9
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci_brcmstb.c322
3 files changed, 332 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ee5209fb82b2..e881503fd4c6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -98,6 +98,15 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
+config AHCI_BRCMSTB
+ tristate "Broadcom STB AHCI SATA support"
+ depends on ARCH_BRCMSTB
+ help
+ This option enables support for the AHCI SATA3 controller found on
+ STB SoC's.
+
+ If unsure, say N.
+
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 40f7865f20a1..5154753ade63 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
new file mode 100644
index 000000000000..ce1e3a885981
--- /dev/null
+++ b/drivers/ata/ahci_brcmstb.c
@@ -0,0 +1,322 @@
+/*
+ * Broadcom SATA3 AHCI Controller Driver
+ *
+ * Copyright © 2009-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+#include "ahci.h"
+
+#define DRV_NAME "brcm-ahci"
+
+#define SATA_TOP_CTRL_VERSION 0x0
+#define SATA_TOP_CTRL_BUS_CTRL 0x4
+ #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
+ #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
+ #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
+ #define PIODATA_ENDIAN_SHIFT 6
+ #define ENDIAN_SWAP_NONE 0
+ #define ENDIAN_SWAP_FULL 2
+ #define OVERRIDE_HWINIT BIT(16)
+#define SATA_TOP_CTRL_TP_CTRL 0x8
+#define SATA_TOP_CTRL_PHY_CTRL 0xc
+ #define SATA_TOP_CTRL_PHY_CTRL_1 0x0
+ #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
+ #define SATA_TOP_CTRL_PHY_CTRL_2 0x4
+ #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
+ #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
+ #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
+ #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
+ #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
+ #define SATA_TOP_CTRL_PHY_OFFS 0x8
+ #define SATA_TOP_MAX_PHYS 2
+#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
+#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20
+
+/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
+#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
+#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
+#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
+#else
+#define DATA_ENDIAN 0
+#define MMIO_ENDIAN 0
+#endif
+
+#define BUS_CTRL_ENDIAN_CONF \
+ ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
+ (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
+ (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+
+struct brcm_ahci_priv {
+ struct device *dev;
+ void __iomem *top_ctrl;
+ u32 port_mask;
+};
+
+static const struct ata_port_info ahci_brcm_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static inline u32 brcm_sata_readreg(void __iomem *addr)
+{
+ /*
+ * MIPS endianness is configured by boot strap, which also reverses all
+ * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+ * endian I/O).
+ *
+ * Other architectures (e.g., ARM) either do not support big endian, or
+ * else leave I/O in little endian mode.
+ */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ return __raw_readl(addr);
+ else
+ return readl_relaxed(addr);
+}
+
+static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
+{
+ /* See brcm_sata_readreg() comments */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ __raw_writel(val, addr);
+ else
+ writel_relaxed(val, addr);
+}
+
+static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
+{
+ void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+ (port * SATA_TOP_CTRL_PHY_OFFS);
+ void __iomem *p;
+ u32 reg;
+
+ /* clear PHY_DEFAULT_POWER_STATE */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+ reg = brcm_sata_readreg(p);
+ reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+ brcm_sata_writereg(reg, p);
+
+ /* reset the PHY digital logic */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+ reg = brcm_sata_readreg(p);
+ reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+ SATA_TOP_CTRL_2_SW_RST_RX);
+ reg |= SATA_TOP_CTRL_2_SW_RST_TX;
+ brcm_sata_writereg(reg, p);
+ reg = brcm_sata_readreg(p);
+ reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+ brcm_sata_writereg(reg, p);
+ reg = brcm_sata_readreg(p);
+ reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+ brcm_sata_writereg(reg, p);
+ (void)brcm_sata_readreg(p);
+}
+
+static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
+{
+ void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+ (port * SATA_TOP_CTRL_PHY_OFFS);
+ void __iomem *p;
+ u32 reg;
+
+ /* power-off the PHY digital logic */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+ reg = brcm_sata_readreg(p);
+ reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+ SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
+ SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
+ brcm_sata_writereg(reg, p);
+
+ /* set PHY_DEFAULT_POWER_STATE */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+ reg = brcm_sata_readreg(p);
+ reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+ brcm_sata_writereg(reg, p);
+}
+
+static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+ if (priv->port_mask & BIT(i))
+ brcm_sata_phy_enable(priv, i);
+}
+
+static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+ if (priv->port_mask & BIT(i))
+ brcm_sata_phy_disable(priv, i);
+}
+
+static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+ struct brcm_ahci_priv *priv)
+{
+ void __iomem *ahci;
+ struct resource *res;
+ u32 impl;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
+ ahci = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ahci))
+ return 0;
+
+ impl = readl(ahci + HOST_PORTS_IMPL);
+
+ if (fls(impl) > SATA_TOP_MAX_PHYS)
+ dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
+ impl);
+ else if (!impl)
+ dev_info(priv->dev, "no ports found\n");
+
+ devm_iounmap(&pdev->dev, ahci);
+ devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
+
+ return impl;
+}
+
+static void brcm_sata_init(struct brcm_ahci_priv *priv)
+{
+ /* Configure endianness */
+ brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
+ priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+}
+
+static int brcm_ahci_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ int ret;
+
+ ret = ahci_platform_suspend(dev);
+ brcm_sata_phys_disable(priv);
+ return ret;
+}
+
+static int brcm_ahci_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+
+ brcm_sata_init(priv);
+ brcm_sata_phys_enable(priv);
+ return ahci_platform_resume(dev);
+}
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static int brcm_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct brcm_ahci_priv *priv;
+ struct ahci_host_priv *hpriv;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
+ priv->top_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->top_ctrl))
+ return PTR_ERR(priv->top_ctrl);
+
+ brcm_sata_init(priv);
+
+ priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
+ if (!priv->port_mask)
+ return -ENODEV;
+
+ brcm_sata_phys_enable(priv);
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+ hpriv->plat_data = priv;
+
+ ret = ahci_platform_enable_resources(hpriv);
+ if (ret)
+ return ret;
+
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
+ &ahci_platform_sht);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "Broadcom AHCI SATA3 registered\n");
+
+ return 0;
+}
+
+static int brcm_ahci_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ int ret;
+
+ ret = ata_platform_remove_one(pdev);
+ if (ret)
+ return ret;
+
+ brcm_sata_phys_disable(priv);
+
+ return 0;
+}
+
+static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,bcm7445-ahci"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
+
+static struct platform_driver brcm_ahci_driver = {
+ .probe = brcm_ahci_probe,
+ .remove = brcm_ahci_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_brcm_pm_ops,
+ },
+};
+module_platform_driver(brcm_ahci_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
+MODULE_AUTHOR("Brian Norris");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sata-brcmstb");