diff options
| author | Binbin Zhou <zhoubinbin@loongson.cn> | 2023-01-10 16:03:53 +0300 |
|---|---|---|
| committer | Wolfram Sang <wsa@kernel.org> | 2023-01-20 12:12:56 +0300 |
| commit | 7b6e9dc7e42d869a32ba4f517a7d9eec4c6173d5 (patch) | |
| tree | e56a648fadfac9a14af671e0b437fdb193dcff34 | |
| parent | a4a1a78e3b5e511e6e5ca7407141911acdd0d3aa (diff) | |
| download | linux-7b6e9dc7e42d869a32ba4f517a7d9eec4c6173d5.tar.xz | |
i2c: gpio: Add support on ACPI-based system
Add support for the ACPI-based device registration, so that the driver
can be also enabled through ACPI table.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Tested-by: Peibao Liu <liupeibao@loongson.cn>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
| -rw-r--r-- | drivers/i2c/busses/i2c-gpio.c | 34 |
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 0e4385a9bcf7..e4a59840c4fc 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -13,9 +13,9 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_data/i2c-gpio.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> struct i2c_gpio_private_data { @@ -300,22 +300,23 @@ static inline void i2c_gpio_fault_injector_init(struct platform_device *pdev) {} static inline void i2c_gpio_fault_injector_exit(struct platform_device *pdev) {} #endif /* CONFIG_I2C_GPIO_FAULT_INJECTOR*/ -static void of_i2c_gpio_get_props(struct device_node *np, - struct i2c_gpio_platform_data *pdata) +/* Get i2c-gpio properties from DT or ACPI table */ +static void i2c_gpio_get_properties(struct device *dev, + struct i2c_gpio_platform_data *pdata) { u32 reg; - of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay); + device_property_read_u32(dev, "i2c-gpio,delay-us", &pdata->udelay); - if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", ®)) + if (!device_property_read_u32(dev, "i2c-gpio,timeout-ms", ®)) pdata->timeout = msecs_to_jiffies(reg); pdata->sda_is_open_drain = - of_property_read_bool(np, "i2c-gpio,sda-open-drain"); + device_property_read_bool(dev, "i2c-gpio,sda-open-drain"); pdata->scl_is_open_drain = - of_property_read_bool(np, "i2c-gpio,scl-open-drain"); + device_property_read_bool(dev, "i2c-gpio,scl-open-drain"); pdata->scl_is_output_only = - of_property_read_bool(np, "i2c-gpio,scl-output-only"); + device_property_read_bool(dev, "i2c-gpio,scl-output-only"); } static struct gpio_desc *i2c_gpio_get_desc(struct device *dev, @@ -361,7 +362,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; + struct fwnode_handle *fwnode = dev_fwnode(dev); enum gpiod_flags gflags; int ret; @@ -373,8 +374,8 @@ static int i2c_gpio_probe(struct platform_device *pdev) bit_data = &priv->bit_data; pdata = &priv->pdata; - if (np) { - of_i2c_gpio_get_props(np, pdata); + if (fwnode) { + i2c_gpio_get_properties(dev, pdata); } else { /* * If all platform data settings are zero it is OK @@ -435,7 +436,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) bit_data->data = priv; adap->owner = THIS_MODULE; - if (np) + if (fwnode) strscpy(adap->name, dev_name(dev), sizeof(adap->name)); else snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); @@ -443,7 +444,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) adap->algo_data = bit_data; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->dev.parent = dev; - adap->dev.of_node = np; + device_set_node(&adap->dev, fwnode); adap->nr = pdev->id; ret = i2c_bit_add_numbered_bus(adap); @@ -489,10 +490,17 @@ static const struct of_device_id i2c_gpio_dt_ids[] = { MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids); +static const struct acpi_device_id i2c_gpio_acpi_match[] = { + { "LOON0005" }, /* LoongArch */ + { } +}; +MODULE_DEVICE_TABLE(acpi, i2c_gpio_acpi_match); + static struct platform_driver i2c_gpio_driver = { .driver = { .name = "i2c-gpio", .of_match_table = i2c_gpio_dt_ids, + .acpi_match_table = i2c_gpio_acpi_match, }, .probe = i2c_gpio_probe, .remove = i2c_gpio_remove, |