summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2021-04-27 10:09:07 +0300
committerDavid S. Miller <davem@davemloft.net>2021-04-28 00:13:24 +0300
commit800fcab8230f622544a12403977b5b7259a076f8 (patch)
tree51c1bd5277f0a3f604e2cdb8c6b437e22408d6f4
parent61df0e7bbb90fac8c77203e0fa570804617f137d (diff)
downloadlinux-800fcab8230f622544a12403977b5b7259a076f8.tar.xz
net: phy: Add support for microchip SMI0 MDIO bus
SMI0 is a mangled version of MDIO. The main low level difference is the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The read/write information is instead encoded in the PHY address. Extend the bit-bang code to allow the op code to be overridden, but default to normal C22 values. Add an extra compatible to the mdio-gpio driver, and when this compatible is present, set the op codes to 0. A higher level driver, sitting on top of the basic MDIO bus driver can then implement the rest of the microchip SMI0 odderties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/mdio/mdio-bitbang.c8
-rw-r--r--drivers/net/mdio/mdio-gpio.c8
-rw-r--r--include/linux/mdio-bitbang.h3
3 files changed, 17 insertions, 2 deletions
diff --git a/drivers/net/mdio/mdio-bitbang.c b/drivers/net/mdio/mdio-bitbang.c
index 0f457c436335..07609114a26b 100644
--- a/drivers/net/mdio/mdio-bitbang.c
+++ b/drivers/net/mdio/mdio-bitbang.c
@@ -158,7 +158,7 @@ int mdiobb_read(struct mii_bus *bus, int phy, int reg)
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
} else
- mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+ mdiobb_cmd(ctrl, ctrl->op_c22_read, phy, reg);
ctrl->ops->set_mdio_dir(ctrl, 0);
@@ -190,7 +190,7 @@ int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
} else
- mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+ mdiobb_cmd(ctrl, ctrl->op_c22_write, phy, reg);
/* send the turnaround (10) */
mdiobb_send_bit(ctrl, 1);
@@ -217,6 +217,10 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
bus->read = mdiobb_read;
bus->write = mdiobb_write;
bus->priv = ctrl;
+ if (!ctrl->override_op_c22) {
+ ctrl->op_c22_read = MDIO_READ;
+ ctrl->op_c22_write = MDIO_WRITE;
+ }
return bus;
}
diff --git a/drivers/net/mdio/mdio-gpio.c b/drivers/net/mdio/mdio-gpio.c
index 56c8f914f893..0fb3c2de0845 100644
--- a/drivers/net/mdio/mdio-gpio.c
+++ b/drivers/net/mdio/mdio-gpio.c
@@ -132,6 +132,13 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
}
+ if (dev->of_node &&
+ of_device_is_compatible(dev->of_node, "microchip,mdio-smi0")) {
+ bitbang->ctrl.op_c22_read = 0;
+ bitbang->ctrl.op_c22_write = 0;
+ bitbang->ctrl.override_op_c22 = 1;
+ }
+
dev_set_drvdata(dev, new_bus);
return new_bus;
@@ -196,6 +203,7 @@ static int mdio_gpio_remove(struct platform_device *pdev)
static const struct of_device_id mdio_gpio_of_match[] = {
{ .compatible = "virtual,mdio-gpio", },
+ { .compatible = "microchip,mdio-smi0" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mdio_gpio_of_match);
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
index aca4dc037b70..373630fe5c28 100644
--- a/include/linux/mdio-bitbang.h
+++ b/include/linux/mdio-bitbang.h
@@ -33,6 +33,9 @@ struct mdiobb_ops {
struct mdiobb_ctrl {
const struct mdiobb_ops *ops;
+ unsigned int override_op_c22;
+ u8 op_c22_read;
+ u8 op_c22_write;
};
int mdiobb_read(struct mii_bus *bus, int phy, int reg);