arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level

GPIO nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.

Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-9-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

5 files changed, 27 insertions, 87 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 0b89977351c9..f06e7bda46f0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -647,52 +647,23 @@
 	};
 };
 
-&main_gpio2 {
-	/* Unused */
-	status = "disabled";
-};
-
-&main_gpio3 {
-	/* Unused */
-	status = "disabled";
-};
-
-&main_gpio4 {
-	/* Unused */
-	status = "disabled";
-};
-
-&main_gpio5 {
-	/* Unused */
-	status = "disabled";
-};
-
-&main_gpio6 {
-	/* Unused */
-	status = "disabled";
-};
-
-&main_gpio7 {
-	/* Unused */
-	status = "disabled";
-};
-
 &wkup_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
 		    <&mikro_bus_pins_default>;
 };
 
-&wkup_gpio1 {
-	/* Unused */
-	status = "disabled";
-};
-
 &main_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
 };
 
+&main_gpio1 {
+	status = "okay";
+};
+
 &usb_serdes_mux {
 	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index e9b84d2c64b2..824874a7dcb9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -469,37 +469,18 @@
 	pinctrl-0 = <&main_uart4_pins_default>;
 };
 
-&main_gpio2 {
-	status = "disabled";
-};
-
-&main_gpio3 {
-	status = "disabled";
-};
-
-&main_gpio4 {
-	status = "disabled";
-};
-
-&main_gpio5 {
-	status = "disabled";
-};
-
-&main_gpio6 {
-	status = "disabled";
-};
-
-&main_gpio7 {
-	status = "disabled";
-};
-
 &wkup_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_gpio_pins_default>;
 };
 
-&wkup_gpio1 {
-	status = "disabled";
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
 };
 
 &main_sdhci0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 3c53ddd6a67a..e9eb3bac0632 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1340,6 +1340,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio1: gpio@601000 {
@@ -1356,6 +1357,7 @@
 		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 106 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio2: gpio@610000 {
@@ -1373,6 +1375,7 @@
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio3: gpio@611000 {
@@ -1389,6 +1392,7 @@
 		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 108 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio4: gpio@620000 {
@@ -1406,6 +1410,7 @@
 		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 109 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio5: gpio@621000 {
@@ -1422,6 +1427,7 @@
 		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 110 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio6: gpio@630000 {
@@ -1439,6 +1445,7 @@
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 111 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio7: gpio@631000 {
@@ -1455,6 +1462,7 @@
 		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 112 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 2b5dfb3aba12..4ecc19b1e92e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -281,6 +281,7 @@
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 113 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	wkup_gpio1: gpio@42100000 {
@@ -297,6 +298,7 @@
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@40b00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 4cd5346f2dd5..ed4994d264f2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -731,41 +731,19 @@
 };
 
 &main_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
 };
 
 &main_gpio1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
 };
 
-&main_gpio2 {
-	status = "disabled";
-};
-
-&main_gpio3 {
-	status = "disabled";
-};
-
-&main_gpio4 {
-	status = "disabled";
-};
-
-&main_gpio5 {
-	status = "disabled";
-};
-
-&main_gpio6 {
-	status = "disabled";
-};
-
-&main_gpio7 {
-	status = "disabled";
-};
-
-&wkup_gpio1 {
-	status = "disabled";
+&wkup_gpio0 {
+	status = "okay";
 };
 
 &usb_serdes_mux {