summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMartin Olsson <martin@minimum.se>2009-04-22 20:21:29 +0400
committerJiri Kosina <jkosina@suse.cz>2009-06-12 20:01:46 +0400
commit98a1708de1bfa5fe1c490febba850d6043d3c7fa (patch)
tree823104983ff8cd44fc8f3dbfbcc583dc69ee30b2
parentab2274af0569a43c6da390e969759d1138799839 (diff)
downloadlinux-98a1708de1bfa5fe1c490febba850d6043d3c7fa.tar.xz
trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments.
Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/board.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt2
-rw-r--r--arch/s390/kernel/head.S2
-rw-r--r--drivers/ata/libata-acpi.c4
-rw-r--r--drivers/ata/libata-eh.c2
-rw-r--r--drivers/edac/e752x_edac.c2
-rw-r--r--drivers/isdn/divert/isdn_divert.c2
-rw-r--r--drivers/net/appletalk/ltpc.c2
-rw-r--r--drivers/net/e1000e/e1000.h2
-rw-r--r--drivers/net/ehea/ehea.h2
-rw-r--r--drivers/net/igbvf/igbvf.h2
-rw-r--r--drivers/net/mlx4/en_netdev.c2
-rw-r--r--drivers/net/qlge/qlge_mpi.c6
-rw-r--r--drivers/net/skfp/h/smt.h2
-rw-r--r--drivers/net/tokenring/3c359.c2
-rw-r--r--drivers/net/tokenring/lanstreamer.c2
-rw-r--r--drivers/net/tokenring/olympic.c2
-rw-r--r--drivers/net/ucc_geth_ethtool.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h2
-rw-r--r--drivers/net/wireless/wavelan_cs.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c4
-rw-r--r--sound/pci/sis7019.h4
22 files changed, 27 insertions, 27 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb4..e8b5bc24d0ac 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
- reg : Should contain the address and the length of the GPIO bank
register.
- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional paramters (currently unused).
+ second cell is used to specify optional parameters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1bc..349f79fd7076 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional paramters (currently unused).
+ second cell is used to specify optional parameters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 22596d70fc2e..2c54e970d0d6 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -64,7 +64,7 @@ __HEAD
.org 0x100
#
# subroutine for loading from tape
-# Paramters:
+# Parameters:
# R1 = device number
# R2 = load address
.Lloader:
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6273d98d00eb..ac176da1f94e 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
/**
* ata_acpi_exec_tfs - get then write drive taskfile settings
* @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
*
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
*
* LOCKING:
* EH context.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 94919ad03df1..fa22f94ca415 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
+ * @r_failed_dev: out parameter for failed device
*
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
* ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71c..d205d493a68a 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
struct pci_dev *dev = pvt->dev_d0f1;
int enable = 1;
- /* Allow module paramter override, else see if CPU supports parity */
+ /* Allow module parameter override, else see if CPU supports parity */
if (sysbus_parity != -1) {
enable = sysbus_parity;
} else if (cpu_id[0] &&
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 7d97d54588d9..77e9fdda0597 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
(mode != 1) ? "" : " 0 ",
(mode != 1) ? "" : fwd_nr);
- retval = divert_if.ll_cmd(&cs->ics); /* excute command */
+ retval = divert_if.ll_cmd(&cs->ics); /* execute command */
if (!retval)
{ cs->prev = NULL;
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc71469136..b642647170be 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a8..44f0bf23dafc 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
e_printk(KERN_NOTICE, adapter, format, ## arg)
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
#define E1000E_INT_MODE_LEGACY 0
#define E1000E_INT_MODE_MSI 1
#define E1000E_INT_MODE_MSIX 2
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575a..78952f8324e2 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e46871..d488733893a6 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
/* Interrupt defines */
#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
#define IGBVF_INT_MODE_LEGACY 0
#define IGBVF_INT_MODE_MSI 1
#define IGBVF_INT_MODE_MSIX 2
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de1637..e8eeef0c9c9a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -371,7 +371,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
int i;
/* If we haven't received a specific coalescing setting
- * (module param), we set the moderation paramters as follows:
+ * (module param), we set the moderation parameters as follows:
* - moder_cnt is set to the number of mtu sized packets to
* satisfy our coelsing target.
* - moder_time is set to a fixed value.
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10b..ac9493f6c1a1 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -141,7 +141,7 @@ end:
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
* to handler processing this since a mailbox command
* will need to be sent to ACK the request.
*/
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode.
+ * parameters, or loopback mode.
*/
case AEN_IDC_REQ:
status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
/* Process and inbound IDC event.
* This will happen when we're trying to
* change tx/rx max frame size, change pause
- * paramters or loopback mode.
+ * parameters or loopback mode.
*/
case AEN_IDC_CMPLT:
case AEN_IDC_EXT:
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d10..2976757a36fb 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483c..0337b9d673f4 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
MODULE_FIRMWARE(FW_NAME);
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f1459..46a2cc92d979 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d36883..2d819fc85589 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257bc..61fe80dda3e3 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d0..d83e3794d340 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -235,7 +235,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
*/
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961aeb..fa2821be44c2 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8032c5adb6a9..679adfff0bf8 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -827,8 +827,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
* @reftag: out: ref tag (reference tag)
*
* Description:
- * Extract DIF paramters from the command if possible. Otherwise,
- * use default paratmers.
+ * Extract DIF parameters from the command if possible. Otherwise,
+ * use default parameters.
*
**/
static inline void
diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h
index 013b6739a742..bc8c76819408 100644
--- a/sound/pci/sis7019.h
+++ b/sound/pci/sis7019.h
@@ -203,7 +203,7 @@
#define SIS_WEISR_B 0xac
-/* Playback DMA parameters (paramter RAM) */
+/* Playback DMA parameters (parameter RAM) */
#define SIS_PLAY_DMA_OFFSET 0x0000
#define SIS_PLAY_DMA_SIZE 0x10
#define SIS_PLAY_DMA_ADDR(addr, num) \
@@ -228,7 +228,7 @@
#define SIS_PLAY_DMA_SSO_MASK 0xffff0000
#define SIS_PLAY_DMA_ESO_MASK 0x0000ffff
-/* Capture DMA parameters (paramter RAM) */
+/* Capture DMA parameters (parameter RAM) */
#define SIS_CAPTURE_DMA_OFFSET 0x0800
#define SIS_CAPTURE_DMA_SIZE 0x10
#define SIS_CAPTURE_DMA_ADDR(addr, num) \