diff options
author | David S. Miller <davem@davemloft.net> | 2022-06-27 13:47:18 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-06-27 13:47:18 +0300 |
commit | 9dd094ee142b8dfd649df2d43c71a2ac7536b9ea (patch) | |
tree | 8ad473d3bc0c6f93bc681b1abc8ea7654d69b474 | |
parent | c83bc86a0596f88958a4279e2558e65c7332169a (diff) | |
parent | c3d396120d68c40cdf2a2da70eff3bf8806f0ff5 (diff) | |
download | linux-9dd094ee142b8dfd649df2d43c71a2ac7536b9ea.tar.xz |
Merge tag 'linux-can-next-for-5.20-20220625' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
23 files changed, 616 insertions, 436 deletions
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml new file mode 100644 index 000000000000..45aa3de7cf01 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Microchip PolarFire SoC (MPFS) can controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + const: microchip,mpfs-can + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + can@2010c000 { + compatible = "microchip,mpfs-can"; + reg = <0x2010c000 0x1000>; + clocks = <&clkcfg 17>; + interrupt-parent = <&plic>; + interrupts = <56>; + }; diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst index f34cb0e4460e..ebc822e605f5 100644 --- a/Documentation/networking/can.rst +++ b/Documentation/networking/can.rst @@ -168,7 +168,7 @@ reflect the correct [#f1]_ traffic on the node the loopback of the sent data has to be performed right after a successful transmission. If the CAN network interface is not capable of performing the loopback for some reason the SocketCAN core can do this task as a fallback solution. -See :ref:`socketcan-local-loopback1` for details (recommended). +See :ref:`socketcan-local-loopback2` for details (recommended). The loopback functionality is enabled by default to reflect standard networking behaviour for CAN applications. Due to some requests from diff --git a/MAINTAINERS b/MAINTAINERS index 4163c072842e..36f0a205c54a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7420,6 +7420,13 @@ S: Maintained F: include/linux/errseq.h F: lib/errseq.c +ESD CAN/USB DRIVERS +M: Frank Jungclaus <frank.jungclaus@esd.eu> +R: socketcan@esd.eu +L: linux-can@vger.kernel.org +S: Maintained +F: drivers/net/can/usb/esd_usb.c + ET131X NETWORK DRIVER M: Mark Einon <mark.einon@gmail.com> S: Odd Fixes diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 3095d08453a1..0ec9a143dfd4 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -339,6 +339,24 @@ status = "disabled"; }; + can0: can@2010c000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010c000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN0>; + interrupt-parent = <&plic>; + interrupts = <56>; + status = "disabled"; + }; + + can1: can@2010d000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010d000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN1>; + interrupt-parent = <&plic>; + interrupts = <57>; + status = "disabled"; + }; + mac0: ethernet@20110000 { compatible = "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b2a4f998c180..5de243899de8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -499,6 +499,8 @@ config NET_SB1000 source "drivers/net/phy/Kconfig" +source "drivers/net/can/Kconfig" + source "drivers/net/mctp/Kconfig" source "drivers/net/mdio/Kconfig" diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b2dcc1e5a388..806f15146f69 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -1,5 +1,26 @@ # SPDX-License-Identifier: GPL-2.0-only -menu "CAN Device Drivers" + +menuconfig CAN_DEV + tristate "CAN Device Drivers" + default y + depends on CAN + help + Controller Area Network (CAN) is serial communications protocol up to + 1Mbit/s for its original release (now known as Classical CAN) and up + to 8Mbit/s for the more recent CAN with Flexible Data-Rate + (CAN-FD). The CAN bus was originally mainly for automotive, but is now + widely used in marine (NMEA2000), industrial, and medical + applications. More information on the CAN network protocol family + PF_CAN is contained in <Documentation/networking/can.rst>. + + This section contains all the CAN(-FD) device drivers including the + virtual ones. If you own such devices or plan to use the virtual CAN + interfaces to develop applications, say Y here. + + To compile as a module, choose M here: the module will be called + can-dev. + +if CAN_DEV config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" @@ -48,15 +69,22 @@ config CAN_SLCAN can be changed by the 'maxdev=xx' module option. This driver can also be built as a module. If so, the module will be called slcan. -config CAN_DEV - tristate "Platform CAN drivers with Netlink support" +config CAN_NETLINK + bool "CAN device drivers with Netlink support" default y help - Enables the common framework for platform CAN drivers with Netlink - support. This is the standard library for CAN drivers. - If unsure, say Y. + Enables the common framework for CAN device drivers. This is the + standard library and provides features for the Netlink interface such + as bittiming validation, support of CAN error states, device restart + and others. -if CAN_DEV + The additional features selected by this option will be added to the + can-dev module. + + This is required by all platform and hardware CAN drivers. If you + plan to use such devices or if unsure, say Y. + +if CAN_NETLINK config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" @@ -69,8 +97,15 @@ config CAN_CALC_BITTIMING source clock frequencies. Disabling saves some space, but then the bit-timing parameters must be specified directly using the Netlink arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". + + The additional features selected by this option will be added to the + can-dev module. + If unsure, say Y. +config CAN_RX_OFFLOAD + bool + config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM @@ -82,6 +117,7 @@ config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" depends on OF || COLDFIRE || COMPILE_TEST depends on HAS_IOMEM + select CAN_RX_OFFLOAD help Say Y here if you want to support for Freescale FlexCAN. @@ -131,6 +167,7 @@ config CAN_SUN4I config CAN_TI_HECC depends on ARM tristate "TI High End CAN Controller" + select CAN_RX_OFFLOAD help Driver for TI HECC (High End CAN Controller) module found on many TI devices. The device specifications are available from www.ti.com @@ -164,7 +201,7 @@ source "drivers/net/can/softing/Kconfig" source "drivers/net/can/spi/Kconfig" source "drivers/net/can/usb/Kconfig" -endif +endif #CAN_NETLINK config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" @@ -174,4 +211,4 @@ config CAN_DEBUG_DEVICES a problem with CAN support and want to see more of what is going on. -endmenu +endif #CAN_DEV diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile index af2901db473c..633687d6b6c0 100644 --- a/drivers/net/can/dev/Makefile +++ b/drivers/net/can/dev/Makefile @@ -1,9 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CAN_DEV) += can-dev.o -can-dev-y += bittiming.o -can-dev-y += dev.o -can-dev-y += length.o -can-dev-y += netlink.o -can-dev-y += rx-offload.o -can-dev-y += skb.o +obj-$(CONFIG_CAN_DEV) += can-dev.o + +can-dev-y += skb.o + +can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += dev.o +can-dev-$(CONFIG_CAN_NETLINK) += length.o +can-dev-$(CONFIG_CAN_NETLINK) += netlink.o +can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c index c1e76f0a5064..7ae80763c960 100644 --- a/drivers/net/can/dev/bittiming.c +++ b/drivers/net/can/dev/bittiming.c @@ -4,205 +4,8 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> */ -#include <linux/units.h> #include <linux/can/dev.h> -#ifdef CONFIG_CAN_CALC_BITTIMING -#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ - -/* Bit-timing calculation derived from: - * - * Code based on LinCAN sources and H8S2638 project - * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz - * Copyright 2005 Stanislav Marek - * email: pisa@cmp.felk.cvut.cz - * - * Calculates proper bit-timing parameters for a specified bit-rate - * and sample-point, which can then be used to set the bit-timing - * registers of the CAN controller. You can find more information - * in the header file linux/can/netlink.h. - */ -static int -can_update_sample_point(const struct can_bittiming_const *btc, - const unsigned int sample_point_nominal, const unsigned int tseg, - unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, - unsigned int *sample_point_error_ptr) -{ - unsigned int sample_point_error, best_sample_point_error = UINT_MAX; - unsigned int sample_point, best_sample_point = 0; - unsigned int tseg1, tseg2; - int i; - - for (i = 0; i <= 1; i++) { - tseg2 = tseg + CAN_SYNC_SEG - - (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / - 1000 - i; - tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); - tseg1 = tseg - tseg2; - if (tseg1 > btc->tseg1_max) { - tseg1 = btc->tseg1_max; - tseg2 = tseg - tseg1; - } - - sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / - (tseg + CAN_SYNC_SEG); - sample_point_error = abs(sample_point_nominal - sample_point); - - if (sample_point <= sample_point_nominal && - sample_point_error < best_sample_point_error) { - best_sample_point = sample_point; - best_sample_point_error = sample_point_error; - *tseg1_ptr = tseg1; - *tseg2_ptr = tseg2; - } - } - - if (sample_point_error_ptr) - *sample_point_error_ptr = best_sample_point_error; - - return best_sample_point; -} - -int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - struct can_priv *priv = netdev_priv(dev); - unsigned int bitrate; /* current bitrate */ - unsigned int bitrate_error; /* difference between current and nominal value */ - unsigned int best_bitrate_error = UINT_MAX; - unsigned int sample_point_error; /* difference between current and nominal value */ - unsigned int best_sample_point_error = UINT_MAX; - unsigned int sample_point_nominal; /* nominal sample point */ - unsigned int best_tseg = 0; /* current best value for tseg */ - unsigned int best_brp = 0; /* current best value for brp */ - unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; - u64 v64; - - /* Use CiA recommended sample points */ - if (bt->sample_point) { - sample_point_nominal = bt->sample_point; - } else { - if (bt->bitrate > 800 * KILO /* BPS */) - sample_point_nominal = 750; - else if (bt->bitrate > 500 * KILO /* BPS */) - sample_point_nominal = 800; - else - sample_point_nominal = 875; - } - - /* tseg even = round down, odd = round up */ - for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; - tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { - tsegall = CAN_SYNC_SEG + tseg / 2; - - /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ - brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; - - /* choose brp step which is possible in system */ - brp = (brp / btc->brp_inc) * btc->brp_inc; - if (brp < btc->brp_min || brp > btc->brp_max) - continue; - - bitrate = priv->clock.freq / (brp * tsegall); - bitrate_error = abs(bt->bitrate - bitrate); - - /* tseg brp biterror */ - if (bitrate_error > best_bitrate_error) - continue; - - /* reset sample point error if we have a better bitrate */ - if (bitrate_error < best_bitrate_error) - best_sample_point_error = UINT_MAX; - - can_update_sample_point(btc, sample_point_nominal, tseg / 2, - &tseg1, &tseg2, &sample_point_error); - if (sample_point_error >= best_sample_point_error) - continue; - - best_sample_point_error = sample_point_error; - best_bitrate_error = bitrate_error; - best_tseg = tseg / 2; - best_brp = brp; - - if (bitrate_error == 0 && sample_point_error == 0) - break; - } - - if (best_bitrate_error) { - /* Error in one-tenth of a percent */ - v64 = (u64)best_bitrate_error * 1000; - do_div(v64, bt->bitrate); - bitrate_error = (u32)v64; - if (bitrate_error > CAN_CALC_MAX_ERROR) { - netdev_err(dev, - "bitrate error %d.%d%% too high\n", - bitrate_error / 10, bitrate_error % 10); - return -EDOM; - } - netdev_warn(dev, "bitrate error %d.%d%%\n", - bitrate_error / 10, bitrate_error % 10); - } - - /* real sample point */ - bt->sample_point = can_update_sample_point(btc, sample_point_nominal, - best_tseg, &tseg1, &tseg2, - NULL); - - v64 = (u64)best_brp * 1000 * 1000 * 1000; - do_div(v64, priv->clock.freq); - bt->tq = (u32)v64; - bt->prop_seg = tseg1 / 2; - bt->phase_seg1 = tseg1 - bt->prop_seg; - bt->phase_seg2 = tseg2; - - /* check for sjw user settings */ - if (!bt->sjw || !btc->sjw_max) { - bt->sjw = 1; - } else { - /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ - if (bt->sjw > btc->sjw_max) - bt->sjw = btc->sjw_max; - /* bt->sjw must not be higher than tseg2 */ - if (tseg2 < bt->sjw) - bt->sjw = tseg2; - } - - bt->brp = best_brp; - - /* real bitrate */ - bt->bitrate = priv->clock.freq / - (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); - - return 0; -} - -void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, - const struct can_bittiming *dbt, - u32 *ctrlmode, u32 ctrlmode_supported) - -{ - if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) - return; - - *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; - - /* As specified in ISO 11898-1 section 11.3.3 "Transmitter - * delay compensation" (TDC) is only applicable if data BRP is - * one or two. - */ - if (dbt->brp == 1 || dbt->brp == 2) { - /* Sample point in clock periods */ - u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + - dbt->phase_seg1) * dbt->brp; - - if (sample_point_in_tc < tdc_const->tdco_min) - return; - tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); - *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; - } -} -#endif /* CONFIG_CAN_CALC_BITTIMING */ - /* Checks the validity of the specified bit-timing parameters prop_seg, * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate * prescaler value brp. You can find more information in the header diff --git a/drivers/net/can/dev/calc_bittiming.c b/drivers/net/can/dev/calc_bittiming.c new file mode 100644 index 000000000000..d3caa040614d --- /dev/null +++ b/drivers/net/can/dev/calc_bittiming.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix + * Copyright (C) 2006 Andrey Volkov, Varma Electronics + * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> + */ + +#include <linux/units.h> +#include <linux/can/dev.h> + +#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ + +/* Bit-timing calculation derived from: + * + * Code based on LinCAN sources and H8S2638 project + * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz + * Copyright 2005 Stanislav Marek + * email: pisa@cmp.felk.cvut.cz + * + * Calculates proper bit-timing parameters for a specified bit-rate + * and sample-point, which can then be used to set the bit-timing + * registers of the CAN controller. You can find more information + * in the header file linux/can/netlink.h. + */ +static int +can_update_sample_point(const struct can_bittiming_const *btc, + const unsigned int sample_point_nominal, const unsigned int tseg, + unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, + unsigned int *sample_point_error_ptr) +{ + unsigned int sample_point_error, best_sample_point_error = UINT_MAX; + unsigned int sample_point, best_sample_point = 0; + unsigned int tseg1, tseg2; + int i; + + for (i = 0; i <= 1; i++) { + tseg2 = tseg + CAN_SYNC_SEG - + (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / + 1000 - i; + tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); + tseg1 = tseg - tseg2; + if (tseg1 > btc->tseg1_max) { + tseg1 = btc->tseg1_max; + tseg2 = tseg - tseg1; + } + + sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / + (tseg + CAN_SYNC_SEG); + sample_point_error = abs(sample_point_nominal - sample_point); + + if (sample_point <= sample_point_nominal && + sample_point_error < best_sample_point_error) { + best_sample_point = sample_point; + best_sample_point_error = sample_point_error; + *tseg1_ptr = tseg1; + *tseg2_ptr = tseg2; + } + } + + if (sample_point_error_ptr) + *sample_point_error_ptr = best_sample_point_error; + + return best_sample_point; +} + +int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + struct can_priv *priv = netdev_priv(dev); + unsigned int bitrate; /* current bitrate */ + unsigned int bitrate_error; /* difference between current and nominal value */ + unsigned int best_bitrate_error = UINT_MAX; + unsigned int sample_point_error; /* difference between current and nominal value */ + unsigned int best_sample_point_error = UINT_MAX; + unsigned int sample_point_nominal; /* nominal sample point */ + unsigned int best_tseg = 0; /* current best value for tseg */ + unsigned int best_brp = 0; /* current best value for brp */ + unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; + u64 v64; + + /* Use CiA recommended sample points */ + if (bt->sample_point) { + sample_point_nominal = bt->sample_point; + } else { + if (bt->bitrate > 800 * KILO /* BPS */) + sample_point_nominal = 750; + else if (bt->bitrate > 500 * KILO /* BPS */) + sample_point_nominal = 800; + else + sample_point_nominal = 875; + } + + /* tseg even = round down, odd = round up */ + for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; + tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { + tsegall = CAN_SYNC_SEG + tseg / 2; + + /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ + brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; + + /* choose brp step which is possible in system */ + brp = (brp / btc->brp_inc) * btc->brp_inc; + if (brp < btc->brp_min || brp > btc->brp_max) + continue; + + bitrate = priv->clock.freq / (brp * tsegall); + bitrate_error = abs(bt->bitrate - bitrate); + + /* tseg brp biterror */ + if (bitrate_error > best_bitrate_error) + continue; + + /* reset sample point error if we have a better bitrate */ + if (bitrate_error < best_bitrate_error) + best_sample_point_error = UINT_MAX; + + can_update_sample_point(btc, sample_point_nominal, tseg / 2, + &tseg1, &tseg2, &sample_point_error); + if (sample_point_error >= best_sample_point_error) + continue; + + best_sample_point_error = sample_point_error; + best_bitrate_error = bitrate_error; + best_tseg = tseg / 2; + best_brp = brp; + + if (bitrate_error == 0 && sample_point_error == 0) + break; + } + + if (best_bitrate_error) { + /* Error in one-tenth of a percent */ + v64 = (u64)best_bitrate_error * 1000; + do_div(v64, bt->bitrate); + bitrate_error = (u32)v64; + if (bitrate_error > CAN_CALC_MAX_ERROR) { + netdev_err(dev, + "bitrate error %d.%d%% too high\n", + bitrate_error / 10, bitrate_error % 10); + return -EDOM; + } + netdev_warn(dev, "bitrate error %d.%d%%\n", + bitrate_error / 10, bitrate_error % 10); + } + + /* real sample point */ + bt->sample_point = can_update_sample_point(btc, sample_point_nominal, + best_tseg, &tseg1, &tseg2, + NULL); + + v64 = (u64)best_brp * 1000 * 1000 * 1000; + do_div(v64, priv->clock.freq); + bt->tq = (u32)v64; + bt->prop_seg = tseg1 / 2; + bt->phase_seg1 = tseg1 - bt->prop_seg; + bt->phase_seg2 = tseg2; + + /* check for sjw user settings */ + if (!bt->sjw || !btc->sjw_max) { + bt->sjw = 1; + } else { + /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ + if (bt->sjw > btc->sjw_max) + bt->sjw = btc->sjw_max; + /* bt->sjw must not be higher than tseg2 */ + if (tseg2 < bt->sjw) + bt->sjw = tseg2; + } + + bt->brp = best_brp; + + /* real bitrate */ + bt->bitrate = priv->clock.freq / + (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); + + return 0; +} + +void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, + const struct can_bittiming *dbt, + u32 *ctrlmode, u32 ctrlmode_supported) + +{ + if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) + return; + + *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; + + /* As specified in ISO 11898-1 section 11.3.3 "Transmitter + * delay compensation" (TDC) is only applicable if data BRP is + * one or two. + */ + if (dbt->brp == 1 || dbt->brp == 2) { + /* Sample point in clock periods */ + u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + + dbt->phase_seg1) * dbt->brp; + + if (sample_point_in_tc < tdc_const->tdco_min) + return; + tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); + *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; + } +} diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c index 96c9d9db00cf..523eaacfe29e 100644 --- a/drivers/net/can/dev/dev.c +++ b/drivers/net/can/dev/dev.c @@ -4,7 +4,6 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/netdevice.h> @@ -17,12 +16,6 @@ #include <linux/gpio/consumer.h> #include <linux/of.h> -#define MOD_DESC "CAN device driver interface" - -MODULE_DESCRIPTION(MOD_DESC); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); - static void can_update_state_error_stats(struct net_device *dev, enum can_state new_state) { @@ -513,7 +506,7 @@ static __init int can_dev_init(void) err = can_netlink_register(); if (!err) - pr_info(MOD_DESC "\n"); + pr_info("CAN device driver interface\n"); return err; } diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index 7633d98e3912..037824011266 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -176,7 +176,8 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], * directly via do_set_bitrate(). Bail out if neither * is given. */ - if (!priv->bittiming_const && !priv->do_set_bittiming) + if (!priv->bittiming_const && !priv->do_set_bittiming && + !priv->bitrate_const) return -EOPNOTSUPP; memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); @@ -278,7 +279,8 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], * directly via do_set_bitrate(). Bail out if neither * is given. */ - if (!priv->data_bittiming_const && !priv->do_set_data_bittiming) + if (!priv->data_bittiming_const && !priv->do_set_data_bittiming && + !priv->data_bitrate_const) return -EOPNOTSUPP; memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]), diff --git a/drivers/net/can/dev/skb.c b/drivers/net/can/dev/skb.c index 61660248c69e..8bb62dd864c8 100644 --- a/drivers/net/can/dev/skb.c +++ b/drivers/net/can/dev/skb.c @@ -5,6 +5,14 @@ */ #include <linux/can/dev.h> +#include <linux/can/netlink.h> +#include <linux/module.h> + +#define MOD_DESC "CAN device driver interface" + +MODULE_DESCRIPTION(MOD_DESC); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); /* Local echo of CAN messages * @@ -252,3 +260,67 @@ struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf) return skb; } EXPORT_SYMBOL_GPL(alloc_can_err_skb); + +/* Check for outgoing skbs that have not been created by the CAN subsystem */ +static bool can_skb_headroom_valid(struct net_device *dev, struct sk_buff *skb) +{ + /* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */ + if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv))) + return false; + + /* af_packet does not apply CAN skb specific settings */ + if (skb->ip_summed == CHECKSUM_NONE) { + /* init headroom */ + can_skb_prv(skb)->ifindex = dev->ifindex; + can_skb_prv(skb)->skbcnt = 0; + + skb->ip_summed = CHECKSUM_UNNECESSARY; + + /* perform proper loopback on capable devices */ + if (dev->flags & IFF_ECHO) + skb->pkt_type = PACKET_LOOPBACK; + else + skb->pkt_type = PACKET_HOST; + + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + } + + return true; +} + +/* Drop a given socketbuffer if it does not contain a valid CAN frame. */ +bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) +{ + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + struct can_priv *priv = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else { + goto inval_skb; + } + + if (!can_skb_headroom_valid(dev, skb)) { + goto inval_skb; + } else if (priv->ctrlmode & CAN_CTRLMODE_LISTENONLY) { + netdev_info_once(dev, + "interface in listen only mode, dropping skb\n"); + goto inval_skb; + } + + return false; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return true; +} +EXPORT_SYMBOL_GPL(can_dropped_invalid_skb); diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig index 45ad1b3f0cd0..fc2afab36279 100644 --- a/drivers/net/can/m_can/Kconfig +++ b/drivers/net/can/m_can/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig CAN_M_CAN tristate "Bosch M_CAN support" + select CAN_RX_OFFLOAD help Say Y here if you want support for Bosch M_CAN controller framework. This is common support for devices that embed the Bosch M_CAN IP. diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 5d0c82d8b9a9..4f90e17354f2 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1348,8 +1348,8 @@ static void m_can_chip_config(struct net_device *dev) /* set bittiming params */ m_can_set_bittiming(dev); - /* enable internal timestamp generation, with a prescalar of 16. The - * prescalar is applied to the nominal bit timing + /* enable internal timestamp generation, with a prescaler of 16. The + * prescaler is applied to the nominal bit timing */ m_can_write(cdev, M_CAN_TSCC, FIELD_PREP(TSCC_TCP_MASK, 0xf)); diff --git a/drivers/net/can/spi/mcp251xfd/Kconfig b/drivers/net/can/spi/mcp251xfd/Kconfig index dd0fc0a54be1..877e4356010d 100644 --- a/drivers/net/can/spi/mcp251xfd/Kconfig +++ b/drivers/net/can/spi/mcp251xfd/Kconfig @@ -2,6 +2,7 @@ config CAN_MCP251XFD tristate "Microchip MCP251xFD SPI CAN controllers" + select CAN_RX_OFFLOAD select REGMAP select WANT_DEV_COREDUMP help diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index f959215c9d53..1218f9642f33 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -14,11 +14,18 @@ config CAN_EMS_USB This driver is for the one channel CPC-USB/ARM7 CAN/USB interface from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). -config CAN_ESD_USB2 - tristate "ESD USB/2 CAN/USB interface" +config CAN_ESD_USB + tristate "esd electronics gmbh CAN/USB interfaces" help - This driver supports the CAN-USB/2 interface - from esd electronic system design gmbh (http://www.esd.eu). + This driver adds supports for several CAN/USB interfaces + from esd electronics gmbh (https://www.esd.eu). + + The drivers supports the following devices: + - esd CAN-USB/2 + - esd CAN-USB/Micro + + To compile this driver as a module, choose M here: the module + will be called esd_usb. config CAN_ETAS_ES58X tristate "ETAS ES58X CAN/USB interfaces" diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index 748cf31a0d53..1ea16be5743b 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o -obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o +obj-$(CONFIG_CAN_ESD_USB) += esd_usb.o obj-$(CONFIG_CAN_ETAS_ES58X) += etas_es58x/ obj-$(CONFIG_CAN_GS_USB) += gs_usb.o obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb/ diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb.c index 286daaaea0b8..8a4bf2961f3d 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * CAN driver for esd CAN-USB/2 and CAN-USB/Micro + * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro * - * Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh + * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@esd.eu> + * Copyright (C) 2022 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@esd.eu> */ #include <linux/signal.h> #include <linux/slab.h> @@ -14,20 +15,24 @@ #include <linux/can/dev.h> #include <linux/can/error.h> -MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>"); -MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces"); +MODULE_AUTHOR("Matthias Fuchs <socketcan@esd.eu>"); +MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@esd.eu>"); +MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces"); MODULE_LICENSE("GPL v2"); -/* Define these values to match your devices */ +/* USB vendor and product ID */ #define USB_ESDGMBH_VENDOR_ID 0x0ab4 #define USB_CANUSB2_PRODUCT_ID 0x0010 #define USB_CANUSBM_PRODUCT_ID 0x0011 +/* CAN controller clock frequencies */ #define ESD_USB2_CAN_CLOCK 60000000 #define ESD_USBM_CAN_CLOCK 36000000 -#define ESD_USB2_MAX_NETS 2 -/* USB2 commands */ +/* Maximum number of CAN nets */ +#define ESD_USB_MAX_NETS 2 + +/* USB commands */ #define CMD_VERSION 1 /* also used for VERSION_REPLY */ #define CMD_CAN_RX 2 /* device to host only */ #define CMD_CAN_TX 3 /* also used for TX_DONE */ @@ -43,13 +48,15 @@ MODULE_LICENSE("GPL v2"); #define ESD_EVENT 0x40000000 #define ESD_IDMASK 0x1fffffff -/* esd CAN event ids used by this driver */ -#define ESD_EV_CAN_ERROR_EXT 2 +/* esd CAN event ids */ +#define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */ /* baudrate message flags */ -#define ESD_USB2_UBR 0x80000000 -#define ESD_USB2_LOM 0x40000000 -#define ESD_USB2_NO_BAUDRATE 0x7fffffff +#define ESD_USB_UBR 0x80000000 +#define ESD_USB_LOM 0x40000000 +#define ESD_USB_NO_BAUDRATE 0x7fffffff + +/* bit timing CAN-USB/2 */ #define ESD_USB2_TSEG1_MIN 1 #define ESD_USB2_TSEG1_MAX 16 #define ESD_USB2_TSEG1_SHIFT 16 @@ -68,7 +75,7 @@ MODULE_LICENSE("GPL v2"); #define ESD_ID_ENABLE 0x80 #define ESD_MAX_ID_SEGMENT 64 -/* SJA1000 ECC register (emulated by usb2 firmware) */ +/* SJA1000 ECC register (emulated by usb firmware) */ #define SJA1000_ECC_SEG 0x1F #define SJA1000_ECC_DIR 0x20 #define SJA1000_ECC_ERR 0x06 @@ -158,7 +165,7 @@ struct set_baudrate_msg { }; /* Main message type used between library and application */ -struct __attribute__ ((packed)) esd_usb2_msg { +struct __packed esd_usb_msg { union { struct header_msg hdr; struct version_msg version; @@ -171,23 +178,23 @@ struct __attribute__ ((packed)) esd_usb2_msg { } msg; }; -static struct usb_device_id esd_usb2_table[] = { +static struct usb_device_id esd_usb_table[] = { {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)}, {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSBM_PRODUCT_ID)}, {} }; -MODULE_DEVICE_TABLE(usb, esd_usb2_table); +MODULE_DEVICE_TABLE(usb, esd_usb_table); -struct esd_usb2_net_priv; +struct esd_usb_net_priv; struct esd_tx_urb_context { - struct esd_usb2_net_priv *priv; + struct esd_usb_net_priv *priv; u32 echo_index; }; -struct esd_usb2 { +struct esd_usb { struct usb_device *udev; - struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS]; + struct esd_usb_net_priv *nets[ESD_USB_MAX_NETS]; struct usb_anchor rx_submitted; @@ -198,22 +205,22 @@ struct esd_usb2 { dma_addr_t rxbuf_dma[MAX_RX_URBS]; }; -struct esd_usb2_net_priv { +struct esd_usb_net_priv { struct can_priv can; /* must be the first member */ atomic_t active_tx_jobs; struct usb_anchor tx_submitted; struct esd_tx_urb_context tx_contexts[MAX_TX_URBS]; - struct esd_usb2 *usb2; + struct esd_usb *usb; struct net_device *netdev; int index; u8 old_state; struct can_berr_counter bec; }; -static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) +static void esd_usb_rx_event(struct esd_usb_net_priv *priv, + struct esd_usb_msg *msg) { struct net_device_stats *stats = &priv->netdev->stats; struct can_frame *cf; @@ -296,8 +303,8 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv, } } -static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) +static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv, + struct esd_usb_msg *msg) { struct net_device_stats *stats = &priv->netdev->stats; struct can_frame *cf; @@ -311,7 +318,7 @@ static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv, id = le32_to_cpu(msg->msg.rx.id); if (id & ESD_EVENT) { - esd_usb2_rx_event(priv, msg); + esd_usb_rx_event(priv, msg); } else { skb = alloc_can_skb(priv->netdev, &cf); if (skb == NULL) { @@ -338,12 +345,10 @@ static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv, netif_rx(skb); } - - return; } -static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv, - struct esd_usb2_msg *msg) +static void esd_usb_tx_done_msg(struct esd_usb_net_priv *priv, + struct esd_usb_msg *msg) { struct net_device_stats *stats = &priv->netdev->stats; struct net_device *netdev = priv->netdev; @@ -370,9 +375,9 @@ static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv, netif_wake_queue(netdev); } -static void esd_usb2_read_bulk_callback(struct urb *urb) +static void esd_usb_read_bulk_callback(struct urb *urb) { - struct esd_usb2 *dev = urb->context; + struct esd_usb *dev = urb->context; int retval; int pos = 0; int i; @@ -394,9 +399,9 @@ static void esd_usb2_read_bulk_callback(struct urb *urb) } while (pos < urb->actual_length) { - struct esd_usb2_msg *msg; + struct esd_usb_msg *msg; - msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos); + msg = (struct esd_usb_msg *)(urb->transfer_buffer + pos); switch (msg->msg.hdr.cmd) { case CMD_CAN_RX: @@ -405,7 +410,7 @@ static void esd_usb2_read_bulk_callback(struct urb *urb) break; } - esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg); + esd_usb_rx_can_msg(dev->nets[msg->msg.rx.net], msg); break; case CMD_CAN_TX: @@ -414,8 +419,8 @@ static void esd_usb2_read_bulk_callback(struct urb *urb) break; } - esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net], - msg); + esd_usb_tx_done_msg(dev->nets[msg->msg.txdone.net], + msg); break; } @@ -430,7 +435,7 @@ static void esd_usb2_read_bulk_callback(struct urb *urb) resubmit_urb: usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), urb->transfer_buffer, RX_BUFFER_SIZE, - esd_usb2_read_bulk_callback, dev); + esd_usb_read_bulk_callback, dev); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval == -ENODEV) { @@ -442,19 +447,15 @@ resubmit_urb: dev_err(dev->udev->dev.parent, "failed resubmitting read bulk urb: %d\n", retval); } - - return; } -/* - * callback for bulk IN urb - */ -static void esd_usb2_write_bulk_callback(struct urb *urb) +/* callback for bulk IN urb */ +static void esd_usb_write_bulk_callback(struct urb *urb) { struct esd_tx_urb_context *context = urb->context; - struct esd_usb2_net_priv *priv; + struct esd_usb_net_priv *priv; struct net_device *netdev; - size_t size = sizeof(struct esd_usb2_msg); + size_t size = sizeof(struct esd_usb_msg); WARN_ON(!context); @@ -478,7 +479,7 @@ static ssize_t firmware_show(struct device *d, struct device_attribute *attr, char *buf) { struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); + struct esd_usb *dev = usb_get_intfdata(intf); return sprintf(buf, "%d.%d.%d\n", (dev->version >> 12) & 0xf, @@ -491,7 +492,7 @@ static ssize_t hardware_show(struct device *d, struct device_attribute *attr, char *buf) { struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); + struct esd_usb *dev = usb_get_intfdata(intf); return sprintf(buf, "%d.%d.%d\n", (dev->version >> 28) & 0xf, @@ -504,13 +505,13 @@ static ssize_t nets_show(struct device *d, struct device_attribute *attr, char *buf) { struct usb_interface *intf = to_usb_interface(d); - struct esd_usb2 *dev = usb_get_intfdata(intf); + struct esd_usb *dev = usb_get_intfdata(intf); return sprintf(buf, "%d", dev->net_count); } static DEVICE_ATTR_RO(nets); -static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg) +static int esd_usb_send_msg(struct esd_usb *dev, struct esd_usb_msg *msg) { int actual_length; @@ -522,8 +523,8 @@ static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg) 1000); } -static int esd_usb2_wait_msg(struct esd_usb2 *dev, - struct esd_usb2_msg *msg) +static int esd_usb_wait_msg(struct esd_usb *dev, + struct esd_usb_msg *msg) { int actual_length; @@ -535,7 +536,7 @@ static int esd_usb2_wait_msg(struct esd_usb2 *dev, 1000); } -static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev) +static int esd_usb_setup_rx_urbs(struct esd_usb *dev) { int i, err = 0; @@ -568,7 +569,7 @@ static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev) usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), buf, RX_BUFFER_SIZE, - esd_usb2_read_bulk_callback, dev); + esd_usb_read_bulk_callback, dev); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_anchor_urb(urb, &dev->rx_submitted); @@ -606,14 +607,12 @@ freeurb: return 0; } -/* - * Start interface - */ -static int esd_usb2_start(struct esd_usb2_net_priv *priv) +/* Start interface */ +static int esd_usb_start(struct esd_usb_net_priv *priv) { - struct esd_usb2 *dev = priv->usb2; + struct esd_usb *dev = priv->usb; struct net_device *netdev = priv->netdev; - struct esd_usb2_msg *msg; + struct esd_usb_msg *msg; int err, i; msg = kmalloc(sizeof(*msg), GFP_KERNEL); @@ -622,8 +621,7 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) goto out; } - /* - * Enable all IDs + /* Enable all IDs * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). * Each bit represents one 11 bit CAN identifier. A set bit * enables reception of the corresponding CAN identifier. A cleared @@ -644,11 +642,11 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) /* enable 29bit extended IDs */ msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - err = esd_usb2_send_msg(dev, msg); + err = esd_usb_send_msg(dev, msg); if (err) goto out; - err = esd_usb2_setup_rx_urbs(dev); + err = esd_usb_setup_rx_urbs(dev); if (err) goto out; @@ -664,9 +662,9 @@ out: return err; } -static void unlink_all_urbs(struct esd_usb2 *dev) +static void unlink_all_urbs(struct esd_usb *dev) { - struct esd_usb2_net_priv *priv; + struct esd_usb_net_priv *priv; int i, j; usb_kill_anchored_urbs(&dev->rx_submitted); @@ -687,9 +685,9 @@ static void unlink_all_urbs(struct esd_usb2 *dev) } } -static int esd_usb2_open(struct net_device *netdev) +static int esd_usb_open(struct net_device *netdev) { - struct esd_usb2_net_priv *priv = netdev_priv(netdev); + struct esd_usb_net_priv *priv = netdev_priv(netdev); int err; /* common open */ @@ -698,7 +696,7 @@ static int esd_usb2_open(struct net_device *netdev) return err; /* finally start device */ - err = esd_usb2_start(priv); + err = esd_usb_start(priv); if (err) { netdev_warn(netdev, "couldn't start device: %d\n", err); close_candev(netdev); @@ -710,20 +708,20 @@ static int esd_usb2_open(struct net_device *netdev) return 0; } -static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, +static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev) { - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2 *dev = priv->usb2; + struct esd_usb_net_priv *priv = netdev_priv(netdev); + struct esd_usb *dev = priv->usb; struct esd_tx_urb_context *context = NULL; struct net_device_stats *stats = &netdev->stats; struct can_frame *cf = (struct can_frame *)skb->data; - struct esd_usb2_msg *msg; + struct esd_usb_msg *msg; struct urb *urb; u8 *buf; int i, err; int ret = NETDEV_TX_OK; - size_t size = sizeof(struct esd_usb2_msg); + size_t size = sizeof(struct esd_usb_msg); if (can_dropped_invalid_skb(netdev, skb)) return NETDEV_TX_OK; @@ -745,7 +743,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, goto nobufmem; } - msg = (struct esd_usb2_msg *)buf; + msg = (struct esd_usb_msg *)buf; msg->msg.hdr.len = 3; /* minimal length */ msg->msg.hdr.cmd = CMD_CAN_TX; @@ -771,9 +769,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, } } - /* - * This may never happen. - */ + /* This may never happen */ if (!context) { netdev_warn(netdev, "couldn't find free context\n"); ret = NETDEV_TX_BUSY; @@ -788,7 +784,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf, msg->msg.hdr.len << 2, - esd_usb2_write_bulk_callback, context); + esd_usb_write_bulk_callback, context); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -821,8 +817,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb, netif_trans_update(netdev); - /* - * Release our reference to this URB, the USB core will eventually free + /* Release our reference to this URB, the USB core will eventually free * it entirely. */ usb_free_urb(urb); @@ -839,24 +834,24 @@ nourbmem: return ret; } -static int esd_usb2_close(struct net_device *netdev) +static int esd_usb_close(struct net_device *netdev) { - struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg *msg; + struct esd_usb_net_priv *priv = netdev_priv(netdev); + struct esd_usb_msg *msg; int i; msg = kmalloc(sizeof(*msg), GFP_KERNEL); if (!msg) return -ENOMEM; - /* Disable all IDs (see esd_usb2_start()) */ + /* Disable all IDs (see esd_usb_start()) */ msg->msg.hdr.cmd = CMD_IDADD; msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; msg->msg.filter.net = priv->index; msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) msg->msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, msg) < 0) + if (esd_usb_send_msg(priv->usb, msg) < 0) netdev_err(netdev, "sending idadd message failed\n"); /* set CAN controller to reset mode */ @@ -864,8 +859,8 @@ static int esd_usb2_close(struct net_device *netdev) msg->msg.hdr.cmd = CMD_SETBAUD; msg->msg.setbaud.net = priv->index; msg->msg.setbaud.rsvd = 0; - msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, msg) < 0) + msg->msg.setbaud.baud = cpu_to_le32(ESD_USB_NO_BAUDRATE); + if (esd_usb_send_msg(priv->usb, msg) < 0) netdev_err(netdev, "sending setbaud message failed\n"); priv->can.state = CAN_STATE_STOPPED; @@ -879,10 +874,10 @@ static int esd_usb2_close(struct net_device *netdev) return 0; } -static const struct net_device_ops esd_usb2_netdev_ops = { - .ndo_open = esd_usb2_open, - .ndo_stop = esd_usb2_close, - .ndo_start_xmit = esd_usb2_start_xmit, +static const struct net_device_ops esd_usb_netdev_ops = { + .ndo_open = esd_usb_open, + .ndo_stop = esd_usb_close, + .ndo_start_xmit = esd_usb_start_xmit, .ndo_change_mtu = can_change_mtu, }; @@ -900,20 +895,20 @@ static const struct can_bittiming_const esd_usb2_bittiming_const = { static int esd_usb2_set_bittiming(struct net_device *netdev) { - struct esd_usb2_net_priv *priv = netdev_priv(netdev); + struct esd_usb_net_priv *priv = netdev_priv(netdev); struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg *msg; + struct esd_usb_msg *msg; int err; u32 canbtr; int sjw_shift; - canbtr = ESD_USB2_UBR; + canbtr = ESD_USB_UBR; if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) - canbtr |= ESD_USB2_LOM; + canbtr |= ESD_USB_LOM; canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1); - if (le16_to_cpu(priv->usb2->udev->descriptor.idProduct) == + if (le16_to_cpu(priv->usb->udev->descriptor.idProduct) == USB_CANUSBM_PRODUCT_ID) sjw_shift = ESD_USBM_SJW_SHIFT; else @@ -941,16 +936,16 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) netdev_info(netdev, "setting BTR=%#x\n", canbtr); - err = esd_usb2_send_msg(priv->usb2, msg); + err = esd_usb_send_msg(priv->usb, msg); kfree(msg); return err; } -static int esd_usb2_get_berr_counter(const struct net_device *netdev, - struct can_berr_counter *bec) +static int esd_usb_get_berr_counter(const struct net_device *netdev, + struct can_berr_counter *bec) { - struct esd_usb2_net_priv *priv = netdev_priv(netdev); + struct esd_usb_net_priv *priv = netdev_priv(netdev); bec->txerr = priv->bec.txerr; bec->rxerr = priv->bec.rxerr; @@ -958,7 +953,7 @@ static int esd_usb2_get_berr_counter(const struct net_device *netdev, return 0; } -static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode) +static int esd_usb_set_mode(struct net_device *netdev, enum can_mode mode) { switch (mode) { case CAN_MODE_START: @@ -972,11 +967,11 @@ static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode) return 0; } -static int esd_usb2_probe_one_net(struct usb_interface *intf, int index) +static int esd_usb_probe_one_net(struct usb_interface *intf, int index) { - struct esd_usb2 *dev = usb_get_intfdata(intf); + struct esd_usb *dev = usb_get_intfdata(intf); struct net_device *netdev; - struct esd_usb2_net_priv *priv; + struct esd_usb_net_priv *priv; int err = 0; int i; @@ -995,7 +990,7 @@ static int esd_usb2_probe_one_net(struct usb_interface *intf, int index) for (i = 0; i < MAX_TX_URBS; i++) priv->tx_contexts[i].echo_index = MAX_TX_URBS; - priv->usb2 = dev; + priv->usb = dev; priv->netdev = netdev; priv->index = index; @@ -1013,12 +1008,12 @@ static int esd_usb2_probe_one_net(struct usb_interface *intf, int index) priv->can.bittiming_const = &esd_usb2_bittiming_const; priv->can.do_set_bittiming = esd_usb2_set_bittiming; - priv->can.do_set_mode = esd_usb2_set_mode; - priv->can.do_get_berr_counter = esd_usb2_get_berr_counter; + priv->can.do_set_mode = esd_usb_set_mode; + priv->can.do_get_berr_counter = esd_usb_get_berr_counter; netdev->flags |= IFF_ECHO; /* we support local echo */ - netdev->netdev_ops = &esd_usb2_netdev_ops; + netdev->netdev_ops = &esd_usb_netdev_ops; SET_NETDEV_DEV(netdev, &intf->dev); netdev->dev_id = index; @@ -1038,17 +1033,16 @@ done: return err; } -/* - * probe function for new USB2 devices +/* probe function for new USB devices * * check version information and number of available * CAN interfaces */ -static int esd_usb2_probe(struct usb_interface *intf, +static int esd_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct esd_usb2 *dev; - struct esd_usb2_msg *msg; + struct esd_usb *dev; + struct esd_usb_msg *msg; int i, err; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1076,13 +1070,13 @@ static int esd_usb2_probe(struct usb_interface *intf, msg->msg.version.flags = 0; msg->msg.version.drv_version = 0; - err = esd_usb2_send_msg(dev, msg); + err = esd_usb_send_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "sending version message failed\n"); goto free_msg; } - err = esd_usb2_wait_msg(dev, msg); + err = esd_usb_wait_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "no version message answer\n"); goto free_msg; @@ -1105,7 +1099,7 @@ static int esd_usb2_probe(struct usb_interface *intf, /* do per device probing */ for (i = 0; i < dev->net_count; i++) - esd_usb2_probe_one_net(intf, i); + esd_usb_probe_one_net(intf, i); free_msg: kfree(msg); @@ -1115,12 +1109,10 @@ done: return err; } -/* - * called by the usb core when the device is removed from the system - */ -static void esd_usb2_disconnect(struct usb_interface *intf) +/* called by the usb core when the device is removed from the system */ +static void esd_usb_disconnect(struct usb_interface *intf) { - struct esd_usb2 *dev = usb_get_intfdata(intf); + struct esd_usb *dev = usb_get_intfdata(intf); struct net_device *netdev; int i; @@ -1144,11 +1136,11 @@ static void esd_usb2_disconnect(struct usb_interface *intf) } /* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver esd_usb2_driver = { - .name = "esd_usb2", - .probe = esd_usb2_probe, - .disconnect = esd_usb2_disconnect, - .id_table = esd_usb2_table, +static struct usb_driver esd_usb_driver = { + .name = "esd_usb", + .probe = esd_usb_probe, + .disconnect = esd_usb_disconnect, + .id_table = esd_usb_table, }; -module_usb_driver(esd_usb2_driver); +module_usb_driver(esd_usb_driver); diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c index 2d73ebbf3836..7353745f92d7 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.c +++ b/drivers/net/can/usb/etas_es58x/es58x_core.c @@ -1707,7 +1707,7 @@ static int es58x_alloc_rx_urbs(struct es58x_device *es58x_dev) { const struct device *dev = es58x_dev->dev; const struct es58x_parameters *param = es58x_dev->param; - size_t rx_buf_len = es58x_dev->rx_max_packet_size; + u16 rx_buf_len = usb_maxpacket(es58x_dev->udev, es58x_dev->rx_pipe); struct urb *urb; u8 *buf; int i; @@ -1739,7 +1739,7 @@ static int es58x_alloc_rx_urbs(struct es58x_device *es58x_dev) dev_err(dev, "%s: Could not setup any rx URBs\n", __func__); return ret; } - dev_dbg(dev, "%s: Allocated %d rx URBs each of size %zu\n", + dev_dbg(dev, "%s: Allocated %d rx URBs each of size %u\n", __func__, i, rx_buf_len); return ret; @@ -2223,7 +2223,6 @@ static struct es58x_device *es58x_init_es58x_dev(struct usb_interface *intf, ep_in->bEndpointAddress); es58x_dev->tx_pipe = usb_sndbulkpipe(es58x_dev->udev, ep_out->bEndpointAddress); - es58x_dev->rx_max_packet_size = le16_to_cpu(ep_in->wMaxPacketSize); return es58x_dev; } diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.h b/drivers/net/can/usb/etas_es58x/es58x_core.h index e5033cb5e695..d769bdf740b7 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.h +++ b/drivers/net/can/usb/etas_es58x/es58x_core.h @@ -380,7 +380,6 @@ struct es58x_operators { * @timestamps: a temporary buffer to store the time stamps before * feeding them to es58x_can_get_echo_skb(). Can only be used * in RX branches. - * @rx_max_packet_size: Maximum length of bulk-in URB. * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev). * @opened_channel_cnt: number of channels opened. Free of race * conditions because its two users (net_device_ops:ndo_open() @@ -401,8 +400,8 @@ struct es58x_device { const struct es58x_parameters *param; const struct es58x_operators *ops; - int rx_pipe; - int tx_pipe; + unsigned int rx_pipe; + unsigned int tx_pipe; struct usb_anchor rx_urbs; struct usb_anchor tx_urbs_busy; @@ -414,7 +413,6 @@ struct es58x_device { u64 timestamps[ES58X_ECHO_BULK_MAX]; - u16 rx_max_packet_size; u8 num_can_ch; u8 opened_channel_cnt; diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 8a3b7b103ca4..393b2d9f9d2a 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* Xilinx CAN device driver * - * Copyright (C) 2012 - 2014 Xilinx, Inc. + * Copyright (C) 2012 - 2022 Xilinx, Inc. * Copyright (C) 2009 PetaLogix. All rights reserved. * Copyright (C) 2017 - 2018 Sandvik Mining and Construction Oy * @@ -9,6 +9,7 @@ * This driver is developed for Axi CAN IP and for Zynq CANPS Controller. */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/errno.h> #include <linux/init.h> @@ -50,7 +51,7 @@ enum xcan_reg { /* only on CAN FD cores */ XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate - * Prescalar + * Prescaler */ XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */ XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */ @@ -86,6 +87,8 @@ enum xcan_reg { #define XCAN_MSR_LBACK_MASK 0x00000002 /* Loop back mode select */ #define XCAN_MSR_SLEEP_MASK 0x00000001 /* Sleep mode select */ #define XCAN_BRPR_BRP_MASK 0x000000FF /* Baud rate prescaler */ +#define XCAN_BRPR_TDCO_MASK GENMASK(12, 8) /* TDCO */ +#define XCAN_2_BRPR_TDCO_MASK GENMASK(13, 8) /* TDCO for CANFD 2.0 */ #define XCAN_BTR_SJW_MASK 0x00000180 /* Synchronous jump width */ #define XCAN_BTR_TS2_MASK 0x00000070 /* Time segment 2 */ #define XCAN_BTR_TS1_MASK 0x0000000F /* Time segment 1 */ @@ -99,6 +102,7 @@ enum xcan_reg { #define XCAN_ESR_STER_MASK 0x00000004 /* Stuff error */ #define XCAN_ESR_FMER_MASK 0x00000002 /* Form error */ #define XCAN_ESR_CRCER_MASK 0x00000001 /* CRC error */ +#define XCAN_SR_TDCV_MASK GENMASK(22, 16) /* TDCV Value */ #define XCAN_SR_TXFLL_MASK 0x00000400 /* TX FIFO is full */ #define XCAN_SR_ESTAT_MASK 0x00000180 /* Error status */ #define XCAN_SR_ERRWRN_MASK 0x00000040 /* Error warning */ @@ -132,6 +136,7 @@ enum xcan_reg { #define XCAN_DLCR_BRS_MASK 0x04000000 /* BRS Mask in DLC */ /* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */ +#define XCAN_BRPR_TDC_ENABLE BIT(16) /* Transmitter Delay Compensation (TDC) Enable */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ #define XCAN_BTR_TS2_SHIFT 4 /* Time segment 2 */ #define XCAN_BTR_SJW_SHIFT_CANFD 16 /* Synchronous jump width */ @@ -276,6 +281,26 @@ static const struct can_bittiming_const xcan_data_bittiming_const_canfd2 = { .brp_inc = 1, }; +/* Transmission Delay Compensation constants for CANFD 1.0 */ +static const struct can_tdc_const xcan_tdc_const_canfd = { + .tdcv_min = 0, + .tdcv_max = 0, /* Manual mode not supported. */ + .tdco_min = 0, + .tdco_max = 32, + .tdcf_min = 0, /* Filter window not supported */ + .tdcf_max = 0, +}; + +/* Transmission Delay Compensation constants for CANFD 2.0 */ +static const struct can_tdc_const xcan_tdc_const_canfd2 = { + .tdcv_min = 0, + .tdcv_max = 0, /* Manual mode not supported. */ + .tdco_min = 0, + .tdco_max = 64, + .tdcf_min = 0, /* Filter window not supported */ + .tdcf_max = 0, +}; + /** * xcan_write_reg_le - Write a value to the device register little endian * @priv: Driver private data structure @@ -405,7 +430,7 @@ static int xcan_set_bittiming(struct net_device *ndev) return -EPERM; } - /* Setting Baud Rate prescalar value in BRPR Register */ + /* Setting Baud Rate prescaler value in BRPR Register */ btr0 = (bt->brp - 1); /* Setting Time Segment 1 in BTR Register */ @@ -422,8 +447,16 @@ static int xcan_set_bittiming(struct net_device *ndev) if (priv->devtype.cantype == XAXI_CANFD || priv->devtype.cantype == XAXI_CANFD_2_0) { - /* Setting Baud Rate prescalar value in F_BRPR Register */ + /* Setting Baud Rate prescaler value in F_BRPR Register */ btr0 = dbt->brp - 1; + if (can_tdc_is_enabled(&priv->can)) { + if (priv->devtype.cantype == XAXI_CANFD) + btr0 |= FIELD_PREP(XCAN_BRPR_TDCO_MASK, priv->can.tdc.tdco) | + XCAN_BRPR_TDC_ENABLE; + else + btr0 |= FIELD_PREP(XCAN_2_BRPR_TDCO_MASK, priv->can.tdc.tdco) | + XCAN_BRPR_TDC_ENABLE; + } /* Setting Time Segment 1 in BTR Register */ btr1 = dbt->prop_seg + dbt->phase_seg1 - 1; @@ -1483,6 +1516,22 @@ static int xcan_get_berr_counter(const struct net_device *ndev, return 0; } +/** + * xcan_get_auto_tdcv - Get Transmitter Delay Compensation Value + * @ndev: Pointer to net_device structure + * @tdcv: Pointer to TDCV value + * + * Return: 0 on success + */ +static int xcan_get_auto_tdcv(const struct net_device *ndev, u32 *tdcv) +{ + struct xcan_priv *priv = netdev_priv(ndev); + + *tdcv = FIELD_GET(XCAN_SR_TDCV_MASK, priv->read_reg(priv, XCAN_SR_OFFSET)); + + return 0; +} + static const struct net_device_ops xcan_netdev_ops = { .ndo_open = xcan_open, .ndo_stop = xcan_close, @@ -1735,17 +1784,24 @@ static int xcan_probe(struct platform_device *pdev) priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_BERR_REPORTING; - if (devtype->cantype == XAXI_CANFD) + if (devtype->cantype == XAXI_CANFD) { priv->can.data_bittiming_const = &xcan_data_bittiming_const_canfd; + priv->can.tdc_const = &xcan_tdc_const_canfd; + } - if (devtype->cantype == XAXI_CANFD_2_0) + if (devtype->cantype == XAXI_CANFD_2_0) { priv->can.data_bittiming_const = &xcan_data_bittiming_const_canfd2; + priv->can.tdc_const = &xcan_tdc_const_canfd2; + } if (devtype->cantype == XAXI_CANFD || - devtype->cantype == XAXI_CANFD_2_0) - priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD; + devtype->cantype == XAXI_CANFD_2_0) { + priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD | + CAN_CTRLMODE_TDC_AUTO; + priv->can.do_get_auto_tdcv = xcan_get_auto_tdcv; + } priv->reg_base = addr; priv->tx_max = tx_max; diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index fdb22b00674a..182749e858b3 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -31,6 +31,7 @@ struct sk_buff *alloc_canfd_skb(struct net_device *dev, struct canfd_frame **cfd); struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf); +bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb); /* * The struct can_skb_priv is used to transport additional information along @@ -96,64 +97,6 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb) return nskb; } -/* Check for outgoing skbs that have not been created by the CAN subsystem */ -static inline bool can_skb_headroom_valid(struct net_device *dev, - struct sk_buff *skb) -{ - /* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */ - if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv))) - return false; - - /* af_packet does not apply CAN skb specific settings */ - if (skb->ip_summed == CHECKSUM_NONE) { - /* init headroom */ - can_skb_prv(skb)->ifindex = dev->ifindex; - can_skb_prv(skb)->skbcnt = 0; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - - /* perform proper loopback on capable devices */ - if (dev->flags & IFF_ECHO) - skb->pkt_type = PACKET_LOOPBACK; - else - skb->pkt_type = PACKET_HOST; - - skb_reset_mac_header(skb); - skb_reset_network_header(skb); - skb_reset_transport_header(skb); - } - - return true; -} - -/* Drop a given socketbuffer if it does not contain a valid CAN frame. */ -static inline bool can_dropped_invalid_skb(struct net_device *dev, - struct sk_buff *skb) -{ - const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; - - if (skb->protocol == htons(ETH_P_CAN)) { - if (unlikely(skb->len != CAN_MTU || - cfd->len > CAN_MAX_DLEN)) - goto inval_skb; - } else if (skb->protocol == htons(ETH_P_CANFD)) { - if (unlikely(skb->len != CANFD_MTU || - cfd->len > CANFD_MAX_DLEN)) - goto inval_skb; - } else - goto inval_skb; - - if (!can_skb_headroom_valid(dev, skb)) - goto inval_skb; - - return false; - -inval_skb: - kfree_skb(skb); - dev->stats.tx_dropped++; - return true; -} - static inline bool can_is_canfd_skb(const struct sk_buff *skb) { /* the CAN specific type of skb is identified by its data length */ diff --git a/net/can/Kconfig b/net/can/Kconfig index a9ac5ffab286..cb56be8e3862 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -15,7 +15,8 @@ menuconfig CAN PF_CAN is contained in <Documentation/networking/can.rst>. If you want CAN support you should say Y here and also to the - specific driver for your controller(s) below. + specific driver for your controller(s) under the Network device + support section. if CAN @@ -69,6 +70,4 @@ config CAN_ISOTP If you want to perform automotive vehicle diagnostic services (UDS), say 'y'. -source "drivers/net/can/Kconfig" - endif |