drm/panel: re-alphabetize the menu list

A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc:  <dri-devel@lists.freedesktop.org>
Cc: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205062711.3513-1-rdunlap@infradead.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205062711.3513-1-rdunlap@infradead.org

1 files changed, 101 insertions, 101 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 23b089a2103d..7299ccb82e85 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -87,53 +87,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6
 	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
 	  45NA WUXGA PANEL DSI Video Mode panel
 
-config DRM_PANEL_DSI_CM
-	tristate "Generic DSI command mode panels"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  DRM panel driver for DSI command mode panels with support for
-	  embedded and external backlights.
-
-config DRM_PANEL_LVDS
-	tristate "Generic LVDS panel driver"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	select VIDEOMODE_HELPERS
-	help
-	  This driver supports LVDS panels that don't require device-specific
-	  handling of power supplies or control signals. It implements automatic
-	  backlight handling if the panel is attached to a backlight controller.
-
-config DRM_PANEL_SIMPLE
-	tristate "support for simple panels (other than eDP ones)"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	help
-	  DRM panel driver for dumb non-eDP panels that need at most a regulator
-	  and a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
-
-config DRM_PANEL_EDP
-	tristate "support for simple Embedded DisplayPort panels"
-	depends on OF
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on PM
-	select VIDEOMODE_HELPERS
-	select DRM_DISPLAY_DP_HELPER
-	select DRM_DISPLAY_HELPER
-	select DRM_DP_AUX_BUS
-	select DRM_KMS_HELPER
-	help
-	  DRM panel driver for dumb eDP panels that need at most a regulator and
-	  a GPIO to be powered up. Optionally a backlight can be attached so
-	  that it can be automatically turned off when the panel goes into a
-	  low power state.
-
 config DRM_PANEL_EBBG_FT8719
 	tristate "EBBG FT8719 panel driver"
 	depends on OF
@@ -173,6 +126,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
 	  Say Y if you want to enable support for panels based on the
 	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
 
+config DRM_PANEL_DSI_CM
+	tristate "Generic DSI command mode panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  DRM panel driver for DSI command mode panels with support for
+	  embedded and external backlights.
+
+config DRM_PANEL_LVDS
+	tristate "Generic LVDS panel driver"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  This driver supports LVDS panels that don't require device-specific
+	  handling of power supplies or control signals. It implements automatic
+	  backlight handling if the panel is attached to a backlight controller.
+
 config DRM_PANEL_HIMAX_HX8394
 	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
 	depends on OF
@@ -262,17 +234,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
 	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
 	  800RGBx1280 dots at maximum.
 
-config DRM_PANEL_JDI_LT070ME05000
-	tristate "JDI LT070ME05000 WUXGA DSI panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for JDI DSI video mode
-	  panel as found in Google Nexus 7 (2013) devices.
-	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
-	  24 bit per pixel.
-
 config DRM_PANEL_JDI_LPM102A188A
 	tristate "JDI LPM102A188A DSI panel"
 	depends on OF && GPIOLIB
@@ -284,6 +245,17 @@ config DRM_PANEL_JDI_LPM102A188A
 	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
 	  to the host.
 
+config DRM_PANEL_JDI_LT070ME05000
+	tristate "JDI LT070ME05000 WUXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for JDI DSI video mode
+	  panel as found in Google Nexus 7 (2013) devices.
+	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+	  24 bit per pixel.
+
 config DRM_PANEL_JDI_R63452
 	tristate "JDI R63452 Full HD DSI panel"
 	depends on OF
@@ -337,12 +309,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
-config DRM_PANEL_SAMSUNG_LD9040
-	tristate "Samsung LD9040 RGB/SPI panel"
-	depends on OF && SPI
-	depends on BACKLIGHT_CLASS_DEVICE
-	select VIDEOMODE_HELPERS
-
 config DRM_PANEL_LG_LB035Q02
 	tristate "LG LB035Q024573 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -370,6 +336,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
 	  with the Magnachip D53E6EA8966 panel IC. This panel receives
 	  video data via DSI but commands via 9-bit SPI using DBI.
 
+config DRM_PANEL_MANTIX_MLAF057WE51
+	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Mantix
+	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+	  has a resolution of 720x1440 pixels, a built in backlight and touch
+	  controller.
+
 config DRM_PANEL_NEC_NL8048HL11
 	tristate "NEC NL8048HL11 RGB panel"
 	depends on GPIOLIB && OF && SPI
@@ -468,17 +445,6 @@ config DRM_PANEL_NOVATEK_NT39016
 	  Say Y here if you want to enable support for the panels built
 	  around the Novatek NT39016 display controller.
 
-config DRM_PANEL_MANTIX_MLAF057WE51
-	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y here if you want to enable support for the Mantix
-	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
-	  has a resolution of 720x1440 pixels, a built in backlight and touch
-	  controller.
-
 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
 	tristate "Olimex LCD-OLinuXino panel"
 	depends on OF
@@ -573,6 +539,12 @@ config DRM_PANEL_RONBO_RB070D30
 	  Say Y here if you want to enable support for Ronbo Electronics
 	  RB070D30 1024x600 DSI panel.
 
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_ATNA33XC20
 	tristate "Samsung ATNA33XC20 eDP panel"
 	depends on OF
@@ -596,6 +568,12 @@ config DRM_PANEL_SAMSUNG_DB7430
 	  DB7430 DPI display controller used in such devices as the
 	  LMS397KF04 480x800 DPI panel.
 
+config DRM_PANEL_SAMSUNG_LD9040
+	tristate "Samsung LD9040 RGB/SPI panel"
+	depends on OF && SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6D16D0
 	tristate "Samsung S6D16D0 DSI video mode panel"
 	depends on OF
@@ -661,12 +639,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
 	  Say Y here if you want to be able to access the Samsung
 	  S6E63M0 panel using DSI.
 
-config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
-	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
-	depends on OF
-	select DRM_MIPI_DSI
-	select VIDEOMODE_HELPERS
-
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
@@ -765,15 +737,6 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
-config DRM_PANEL_SYNAPTICS_R63353
-	tristate "Synaptics R63353-based panels"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	help
-	  Say Y if you want to enable support for panels based on the
-	  Synaptics R63353 controller.
-
 config DRM_PANEL_SONY_ACX565AKM
 	tristate "Sony ACX565AKM panel"
 	depends on GPIOLIB && OF && SPI
@@ -813,6 +776,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
 	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
 	  the host, a built-in LED backlight and touch controller.
 
+config DRM_PANEL_EDP
+	tristate "support for simple Embedded DisplayPort panels"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_DP_AUX_BUS
+	select DRM_KMS_HELPER
+	help
+	  DRM panel driver for dumb eDP panels that need at most a regulator and
+	  a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_SIMPLE
+	tristate "support for simple panels (other than eDP ones)"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	help
+	  DRM panel driver for dumb non-eDP panels that need at most a regulator
+	  and a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_SYNAPTICS_R63353
+	tristate "Synaptics R63353-based panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for panels based on the
+	  Synaptics R63353 controller.
+
 config DRM_PANEL_TDO_TL070WSH30
 	tristate "TDO TL070WSH30 DSI panel"
 	depends on OF
@@ -856,6 +856,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_R66451
+	tristate "Visionox R66451"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HELPER
+	help
+	  Say Y here if you want to enable support for Visionox
+	  R66451 1080x2340 AMOLED DSI panel.
+
 config DRM_PANEL_VISIONOX_RM69299
 	tristate "Visionox RM69299"
 	depends on OF
@@ -873,17 +884,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
 	  Say Y here if you want to enable support for Visionox
 	  VTDR6130 1080x2400 AMOLED DSI panel.
 
-config DRM_PANEL_VISIONOX_R66451
-	tristate "Visionox R66451"
-	depends on OF
-	depends on DRM_MIPI_DSI
-	depends on BACKLIGHT_CLASS_DEVICE
-	select DRM_DISPLAY_DP_HELPER
-	select DRM_DISPLAY_HELPER
-	help
-	  Say Y here if you want to enable support for Visionox
-	  R66451 1080x2340 AMOLED DSI panel.
-
 config DRM_PANEL_WIDECHIPS_WS2401
 	tristate "Widechips WS2401 DPI panel driver"
 	depends on SPI && GPIOLIB