diff options
author | Olof Johansson <olof@lixom.net> | 2020-10-03 23:16:48 +0300 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2020-10-03 23:16:50 +0300 |
commit | accdab6d9e8f715068d91ee0ca0424a6999f0d19 (patch) | |
tree | cfe46a8d0ab4846f095b5329255d7b72f36f1231 | |
parent | a4f07008bf45c43e3e02a2e5116d0cbe65fe4b7c (diff) | |
parent | fb956b3e20f0bbeac8c17a7a08e63528a23bd54c (diff) | |
download | linux-accdab6d9e8f715068d91ee0ca0424a6999f0d19.tar.xz |
Merge tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.10:
- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
support and related board files. This is a natural move, as the
platforms had been converted to DT for years, and we have not seen
any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.
* tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: imx: Remove remnant board file support pieces
ARM: imx: Remove imx device directory
ARM: imx: Remove iomux-v3 board code
ARM: imx3: Remove imx3 soc_init()
ARM: imx31: Remove remaining i.MX31 board code
ARM: imx27: Retrieve AVIC base address from devicetree
ARM: imx27: Get rid of mm-imx27.c
ARM: imx27: Remove iomux-v1 board code
ARM: imx27: Remove imx27_soc_init()
ARM: imx7ulp: enable cpufreq
...
Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
104 files changed, 167 insertions, 16300 deletions
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f5f1111f2118..aeb1209e0804 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -20,9 +20,9 @@ CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y -CONFIG_MACH_IMX27_DT=y CONFIG_SOC_IMX1=y CONFIG_SOC_IMX25=y +CONFIG_SOC_IMX27=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 82d3ffb18e70..e1d83018d022 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -15,20 +15,8 @@ CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_IMX31_DT=y -CONFIG_MACH_IMX35_DT=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_VPR200=y +CONFIG_SOC_IMX31=y +CONFIG_SOC_IMX35=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 2724fb3155cd..70b709a669d2 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -29,8 +29,8 @@ CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y -CONFIG_MACH_IMX27_DT=y CONFIG_SOC_IMX25=y +CONFIG_SOC_IMX27=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_ORION5X=y diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c deleted file mode 100644 index 0e018000715a..000000000000 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/module.h> -#include <linux/smsc911x.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include "3ds_debugboard.h" -#include "hardware.h" - -/* LAN9217 ethernet base address */ -#define LAN9217_BASE_ADDR(n) (n + 0x0) -/* External UART */ -#define UARTA_BASE_ADDR(n) (n + 0x8000) -#define UARTB_BASE_ADDR(n) (n + 0x10000) - -#define BOARD_IO_ADDR(n) (n + 0x20000) -/* LED switchs */ -#define LED_SWITCH_REG 0x00 -/* buttons */ -#define SWITCH_BUTTONS_REG 0x08 -/* status, interrupt */ -#define INTR_STATUS_REG 0x10 -#define INTR_MASK_REG 0x38 -#define INTR_RESET_REG 0x20 -/* magic word for debug CPLD */ -#define MAGIC_NUMBER1_REG 0x40 -#define MAGIC_NUMBER2_REG 0x48 -/* CPLD code version */ -#define CPLD_CODE_VER_REG 0x50 -/* magic word for debug CPLD */ -#define MAGIC_NUMBER3_REG 0x58 -/* module reset register*/ -#define MODULE_RESET_REG 0x60 -/* CPU ID and Personality ID */ -#define MCU_BOARD_ID_REG 0x68 - -#define MXC_MAX_EXP_IO_LINES 16 - -/* interrupts like external uart , external ethernet etc*/ -#define EXPIO_INT_ENET 0 -#define EXPIO_INT_XUART_A 1 -#define EXPIO_INT_XUART_B 2 -#define EXPIO_INT_BUTTON_A 3 -#define EXPIO_INT_BUTTON_B 4 - -static void __iomem *brd_io; -static struct irq_domain *domain; - -static struct resource smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - } , { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, -}; - -static struct platform_device smsc_lan9217_device = { - .name = "smsc911x", - .id = -1, - .dev = { - .platform_data = &smsc911x_config, - }, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, -}; - -static void mxc_expio_irq_handler(struct irq_desc *desc) -{ - u32 imr_val; - u32 int_valid; - u32 expio_irq; - - /* irq = gpio irq number */ - desc->irq_data.chip->irq_mask(&desc->irq_data); - - imr_val = imx_readw(brd_io + INTR_MASK_REG); - int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val; - - expio_irq = 0; - for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - if ((int_valid & 1) == 0) - continue; - generic_handle_irq(irq_find_mapping(domain, expio_irq)); - } - - desc->irq_data.chip->irq_ack(&desc->irq_data); - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -/* - * Disable an expio pin's interrupt by setting the bit in the imr. - * Irq is an expio virtual irq number - */ -static void expio_mask_irq(struct irq_data *d) -{ - u16 reg; - u32 expio = d->hwirq; - - reg = imx_readw(brd_io + INTR_MASK_REG); - reg |= (1 << expio); - imx_writew(reg, brd_io + INTR_MASK_REG); -} - -static void expio_ack_irq(struct irq_data *d) -{ - u32 expio = d->hwirq; - - imx_writew(1 << expio, brd_io + INTR_RESET_REG); - imx_writew(0, brd_io + INTR_RESET_REG); - expio_mask_irq(d); -} - -static void expio_unmask_irq(struct irq_data *d) -{ - u16 reg; - u32 expio = d->hwirq; - - reg = imx_readw(brd_io + INTR_MASK_REG); - reg &= ~(1 << expio); - imx_writew(reg, brd_io + INTR_MASK_REG); -} - -static struct irq_chip expio_irq_chip = { - .irq_ack = expio_ack_irq, - .irq_mask = expio_mask_irq, - .irq_unmask = expio_unmask_irq, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -int __init mxc_expio_init(u32 base, u32 intr_gpio) -{ - u32 p_irq = gpio_to_irq(intr_gpio); - int irq_base; - int i; - - brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); - if (brd_io == NULL) - return -ENOMEM; - - if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || - (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || - (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { - pr_info("3-Stack Debug board not detected\n"); - iounmap(brd_io); - brd_io = NULL; - return -ENODEV; - } - - pr_info("3-Stack Debug board detected, rev = 0x%04X\n", - readw(brd_io + CPLD_CODE_VER_REG)); - - /* - * Configure INT line as GPIO input - */ - gpio_request(intr_gpio, "expio_pirq"); - gpio_direction_input(intr_gpio); - - /* disable the interrupt and clear the status */ - imx_writew(0, brd_io + INTR_MASK_REG); - imx_writew(0xFFFF, brd_io + INTR_RESET_REG); - imx_writew(0, brd_io + INTR_RESET_REG); - imx_writew(0x1F, brd_io + INTR_MASK_REG); - - irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); - WARN_ON(irq_base < 0); - - domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, - &irq_domain_simple_ops, NULL); - WARN_ON(!domain); - - for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { - irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } - irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW); - irq_set_chained_handler(p_irq, mxc_expio_irq_handler); - - /* Register Lan device on the debugboard */ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); - smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; - smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); - smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); - platform_device_register(&smsc_lan9217_device); - - return 0; -} diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h deleted file mode 100644 index a4d04d099c61..000000000000 --- a/arch/arm/mach-imx/3ds_debugboard.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#ifndef __ASM_ARCH_MXC_3DS_DB_H__ -#define __ASM_ARCH_MXC_3DS_DB_H__ - -extern int __init mxc_expio_init(u32 base, u32 intr_gpio); - -#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e7d7b90e2cf8..52902782cc5f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -47,371 +47,26 @@ config HAVE_IMX_SRC def_bool y if SMP select ARCH_HAS_RESET_CONTROLLER -config IMX_HAVE_IOMUX_V1 - bool +if ARCH_MULTI_V6 -config ARCH_MXC_IOMUX_V3 - bool - -config SOC_IMX21 - bool - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - -config SOC_IMX27 - bool - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - select PINCTRL_IMX27 +comment "ARM1136 platforms" config SOC_IMX31 - bool + bool "i.MX31 support" select CPU_V6 select MXC_AVIC + help + This enables support for Freescale i.MX31 processor config SOC_IMX35 - bool - select ARCH_MXC_IOMUX_V3 + bool "i.MX35 support" select MXC_AVIC select PINCTRL_IMX35 - -if ARCH_MULTI_V5 - -comment "MX21 platforms:" - -config MACH_MX21ADS - bool "MX21ADS platform" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select SOC_IMX21 - help - Include support for MX21ADS platform. This includes specific - configurations for the board and its peripherals. - -comment "MX27 platforms:" - -config MACH_MX27ADS - bool "MX27ADS platform" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select SOC_IMX27 - help - Include support for MX27ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX27_3DS - bool "MX27PDK platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MX2_CAMERA - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for MX27PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_IMX27_VISSTRIM_M10 - bool "Vista Silicon i.MX27 Visstrim_m10" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MX2_CAMERA - select IMX_HAVE_PLATFORM_MX2_EMMA - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select LEDS_GPIO_REGISTER - select SOC_IMX27 - help - Include support for Visstrim_m10 platform and its different variants. - This includes specific configurations for the board and its - peripherals. - -config MACH_PCA100 - bool "Phytec phyCARD-s (pca100)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCARD-s (aka pca100) platform. This - includes specific configurations for the module and its peripherals. - -config MACH_IMX27_DT - bool "Support i.MX27 platforms from device tree" - select SOC_IMX27 - help - Include support for Freescale i.MX27 based platforms - using the device tree for discovery - -endif - -if ARCH_MULTI_V6 - -comment "MX31 platforms:" - -config MACH_MX31ADS - bool "Support MX31ADS platforms" - default y - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for MX31ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31ADS_WM1133_EV1 - bool "Support Wolfson Microelectronics 1133-EV1 module" - depends on MACH_MX31ADS - depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 = y help - Include support for the Wolfson Microelectronics 1133-EV1 PMU - and audio module for the MX31ADS platform. - -config MACH_MX31LILLY - bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for mx31 based LILLY1131 modules. This includes - specific configurations for the board and its peripherals. - -config MACH_MX31LITE - bool "Support MX31 LITEKIT (LogicPD)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_RTC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for MX31 LITEKIT platform. This includes specific - configurations for the board and its peripherals. - -config MACH_PCM037 - bool "Support Phytec pcm037 (i.MX31) platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for Phytec pcm037 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM037_EET - bool "Support pcm037 EET board extensions" - depends on MACH_PCM037 - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_SPI_IMX - help - Add support for PCM037 EET baseboard extensions. If you are using the - OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel - command-line parameter. - -config MACH_MX31_3DS - bool "Support MX31PDK (3DS)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for MX31PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS_MXC_NAND_USE_BBT - bool "Make the MXC NAND driver use the in flash Bad Block Table" - depends on MACH_MX31_3DS - depends on MTD_NAND_MXC - help - Enable this if you want that the MXC NAND driver uses the in flash - Bad Block Table to know what blocks are bad instead of scanning the - entire flash looking for bad block markers. - -config MACH_MX31MOBOARD - bool "Support mx31moboard platforms (EPFL Mobots group)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for mx31moboard platform. This includes specific - configurations for the board and its peripherals. - -config MACH_QONG - bool "Support Dave/DENX QongEVB-LITE platform" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for Dave/DENX QongEVB-LITE platform. This includes - specific configurations for the board and its peripherals. - -config MACH_ARMADILLO5X0 - bool "Support Atmark Armadillo-500 Development Base Board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for Atmark Armadillo-500 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_KZM_ARM11_01 - bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for KZM-ARM11-01. This includes specific - configurations for the board and its peripherals. - -config MACH_BUG - bool "Support Buglabs BUGBase platform" - default y - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for BUGBase 1.3 platform. This includes specific - configurations for the board and its peripherals. - -config MACH_IMX31_DT - bool "Support i.MX31 platforms from device tree" - select SOC_IMX31 - help - Include support for Freescale i.MX31 based platforms - using the device tree for discovery. - -comment "MX35 platforms:" - -config MACH_IMX35_DT - bool "Support i.MX35 platforms from device tree" - select SOC_IMX35 - help - Include support for Freescale i.MX35 based platforms - using the device tree for discovery. - -config MACH_PCM043 - bool "Support Phytec pcm043 (i.MX35) platforms" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX35 - help - Include support for Phytec pcm043 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_MX35_3DS - bool "Support MX35PDK platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_RTC - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_DEBUG_BOARD - select SOC_IMX35 - help - Include support for MX35PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_VPR200 - bool "Support VPR200 platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX35 - help - Include support for VPR200 platform. This includes specific - configurations for the board and its peripherals. + This enables support for Freescale i.MX31 processor endif -comment "Device tree only" - if ARCH_MULTI_V4T config SOC_IMX1 @@ -428,12 +83,20 @@ if ARCH_MULTI_V5 config SOC_IMX25 bool "i.MX25 support" - select ARCH_MXC_IOMUX_V3 select CPU_ARM926T select MXC_AVIC select PINCTRL_IMX25 help This enables support for Freescale i.MX25 processor + +config SOC_IMX27 + bool "i.MX27 support" + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX27 + help + This enables support for Freescale i.MX27 processor + endif if ARCH_MULTI_V7 @@ -541,10 +204,10 @@ config SOC_LS1021A endif -comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" - if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M +comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" + config SOC_IMX7D_CA7 bool select ARM_GIC @@ -607,6 +270,4 @@ endchoice endif -source "arch/arm/mach-imx/devices/Kconfig" - endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e7364e6c8c6b..9cebd360d58e 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,22 +1,16 @@ # SPDX-License-Identifier: GPL-2.0 obj-y := cpu.o system.o irq-common.o -obj-$(CONFIG_SOC_IMX21) += mm-imx21.o - obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o -obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o +obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o mach-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) -obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o -obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o - obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o @@ -37,37 +31,6 @@ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -# i.MX21 based machines -obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o - -# i.MX27 based machines -obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o -obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o -obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o -obj-$(CONFIG_MACH_PCA100) += mach-pca100.o -obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o - -# i.MX31 based machines -obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o -obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o -obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o -obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o -obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o -obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ - mx31moboard-marxbot.o mx31moboard-smartbot.o -obj-$(CONFIG_MACH_QONG) += mach-qong.o -obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o -obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o -obj-$(CONFIG_MACH_BUG) += mach-bug.o -obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o - -# i.MX35 based machines -obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o -obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o - obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o @@ -105,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o obj-$(CONFIG_SOC_VF610) += mach-vf610.o obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o - -obj-y += devices/ diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h deleted file mode 100644 index 3508c598c588..000000000000 --- a/arch/arm/mach-imx/board-mx31lilly.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - * - * Based on code for mobots boards, - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ - -#ifndef __ASSEMBLY__ - -enum mx31lilly_boards { - MX31LILLY_NOBOARD = 0, - MX31LILLY_DB = 1, -}; - -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - */ - -extern void mx31lilly_db_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */ diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h deleted file mode 100644 index 7d7c6219b25f..000000000000 --- a/arch/arm/mach-imx/board-mx31lite.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - * - * Based on code for mobots boards, - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ - -#ifndef __ASSEMBLY__ - -enum mx31lite_boards { - MX31LITE_NOBOARD = 0, - MX31LITE_DB = 1, -}; - -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - */ - -extern void mx31lite_db_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */ diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h deleted file mode 100644 index 6f3ff4d4ebc1..000000000000 --- a/arch/arm/mach-imx/board-mx31moboard.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ -#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ - -#ifndef __ASSEMBLY__ - -enum mx31moboard_boards { - MX31NOBOARD = 0, - MX31DEVBOARD = 1, - MX31MARXBOT = 2, - MX31SMARTBOT = 3, - MX31EYEBOT = 4, -}; - -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls the baseboard's init function. - */ - -extern void mx31moboard_devboard_init(void); -extern void mx31moboard_marxbot_init(void); -extern void mx31moboard_smartbot_init(int board); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */ diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 72c3fcc32910..2d76e2c6c99e 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -17,29 +17,14 @@ struct device_node; enum mxc_cpu_pwr_mode; struct of_device_id; -void mx21_map_io(void); -void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); void imx21_init_early(void); -void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void mx21_init_irq(void); -void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); -void imx21_soc_init(void); -void imx27_soc_init(void); -void imx31_soc_init(void); -void imx35_soc_init(void); -int mx21_clocks_init(unsigned long lref, unsigned long fref); -int mx27_clocks_init(unsigned long fref); -int mx31_clocks_init(unsigned long fref); -int mx35_clocks_init(void); -struct platform_device *mxc_register_gpio(char *name, int id, - resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); void mxc_set_cpu_type(unsigned int type); void mxc_restart(enum reboot_mode, const char *); void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index a969aa71b60f..bf70e13bbe9e 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -9,6 +9,7 @@ */ #include <linux/io.h> +#include <linux/of_address.h> #include <linux/module.h> #include "hardware.h" @@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1; static int mx27_cpu_partnumber; #define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ +#define SYSCTRL_OFFSET 0x800 /* Offset from CCM base address */ static int mx27_read_cpu_rev(void) { + void __iomem *ccm_base; + struct device_node *np; u32 val; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); /* * now we have access to the IO registers. As we need * the silicon revision very early we read it here to * avoid any further hooks */ - val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); + val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID); mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index 3ee684b71006..b9c24b851d1a 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -6,6 +6,7 @@ */ #include <linux/module.h> +#include <linux/of_address.h> #include <linux/io.h> #include "common.h" @@ -32,10 +33,16 @@ static struct { static int mx31_read_cpu_rev(void) { + void __iomem *iim_base; + struct device_node *np; u32 i, srev; + np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + /* read SREV register from IIM module */ - srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev = imx_readl(iim_base + MXC_IIMSREV); srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index ebb3cdabd506..80e7d8ab9f1b 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -5,6 +5,7 @@ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> */ #include <linux/module.h> +#include <linux/of_address.h> #include <linux/io.h> #include "hardware.h" @@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1; static int mx35_read_cpu_rev(void) { + void __iomem *iim_base; + struct device_node *np; u32 rev; - rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + + rev = imx_readl(iim_base + MXC_IIMSREV); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h deleted file mode 100644 index 3679d1de84d4..000000000000 --- a/arch/arm/mach-imx/devices-imx21.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "devices/devices-common.h" - -extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; -#define imx21_add_imx21_hcd(pdata) \ - imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) - -extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; -#define imx21_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx21_imx2_wdt_data) - -extern const struct imx_imx_fb_data imx21_imx_fb_data; -#define imx21_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx21_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx21_imx_i2c_data; -#define imx21_add_imx_i2c(pdata) \ - imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) - -extern const struct imx_imx_keypad_data imx21_imx_keypad_data; -#define imx21_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx21_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx21_imx_ssi_data[]; -#define imx21_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[]; -#define imx21_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) -#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) -#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata) -#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) -#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) - -extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[]; -#define imx21_add_mxc_mmc(id, pdata) \ - imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata) - -extern const struct imx_mxc_nand_data imx21_mxc_nand_data; -#define imx21_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) - -extern const struct imx_mxc_w1_data imx21_mxc_w1_data; -#define imx21_add_mxc_w1() \ - imx_add_mxc_w1(&imx21_mxc_w1_data) - -extern const struct imx_spi_imx_data imx21_cspi_data[]; -#define imx21_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx21_cspi_data[id], pdata) -#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) -#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h deleted file mode 100644 index 583a1d773d68..000000000000 --- a/arch/arm/mach-imx/devices-imx27.h +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "devices/devices-common.h" - -extern const struct imx_fec_data imx27_fec_data; -#define imx27_add_fec(pdata) \ - imx_add_fec(&imx27_fec_data, pdata) - -extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; -#define imx27_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) - -extern const struct imx_imx27_coda_data imx27_coda_data; -#define imx27_add_coda() \ - imx_add_imx27_coda(&imx27_coda_data) - -extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; -#define imx27_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx27_imx2_wdt_data) - -extern const struct imx_imx_fb_data imx27_imx_fb_data; -#define imx27_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx27_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx27_imx_i2c_data[]; -#define imx27_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) - -extern const struct imx_imx_keypad_data imx27_imx_keypad_data; -#define imx27_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx27_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx27_imx_ssi_data[]; -#define imx27_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; -#define imx27_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) -#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) -#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata) -#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata) -#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata) -#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) -#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) - -extern const struct imx_mx2_camera_data imx27_mx2_camera_data; -#define imx27_add_mx2_camera(pdata) \ - imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) - -extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data; -#define imx27_add_mx2_emmaprp() \ - imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data) - -extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; -#define imx27_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[]; -#define imx27_add_mxc_ehci_hs(id, pdata) \ - imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata) - -extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[]; -#define imx27_add_mxc_mmc(id, pdata) \ - imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata) - -extern const struct imx_mxc_nand_data imx27_mxc_nand_data; -#define imx27_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) - -extern const struct imx_mxc_w1_data imx27_mxc_w1_data; -#define imx27_add_mxc_w1() \ - imx_add_mxc_w1(&imx27_mxc_w1_data) - -extern const struct imx_spi_imx_data imx27_cspi_data[]; -#define imx27_add_cspi(id, gtable) \ - imx_add_spi_imx(&imx27_cspi_data[id], gtable) -#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable) -#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable) -#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable) - -extern const struct imx_pata_imx_data imx27_pata_imx_data; -#define imx27_add_pata_imx() \ - imx_add_pata_imx(&imx27_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h deleted file mode 100644 index f7cc62372532..000000000000 --- a/arch/arm/mach-imx/devices-imx31.h +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "devices/devices-common.h" - -extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; -#define imx31_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) - -extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; -#define imx31_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx31_imx2_wdt_data) - -extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; -#define imx31_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) -#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) -#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) -#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) - -extern const struct imx_imx_keypad_data imx31_imx_keypad_data; -#define imx31_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx31_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx31_imx_ssi_data[]; -#define imx31_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; -#define imx31_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) -#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) -#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) -#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) -#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) -#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) - -extern const struct imx_ipu_core_data imx31_ipu_core_data; -#define imx31_add_ipu_core() \ - imx_add_ipu_core(&imx31_ipu_core_data) -#define imx31_alloc_mx3_camera(pdata) \ - imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) -#define imx31_add_mx3_sdc_fb(pdata) \ - imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata) - -extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data; -#define imx31_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[]; -#define imx31_add_mxc_ehci_hs(id, pdata) \ - imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata) - -extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[]; -#define imx31_add_mxc_mmc(id, pdata) \ - imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata) - -extern const struct imx_mxc_nand_data imx31_mxc_nand_data; -#define imx31_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) - -extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; -#define imx31_add_mxc_rtc() \ - imx_add_mxc_rtc(&imx31_mxc_rtc_data) - -extern const struct imx_mxc_w1_data imx31_mxc_w1_data; -#define imx31_add_mxc_w1() \ - imx_add_mxc_w1(&imx31_mxc_w1_data) - -extern const struct imx_spi_imx_data imx31_cspi_data[]; -#define imx31_add_cspi(id, gtable) \ - imx_add_spi_imx(&imx31_cspi_data[id], gtable) -#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable) -#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable) -#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable) - -extern const struct imx_pata_imx_data imx31_pata_imx_data; -#define imx31_add_pata_imx() \ - imx_add_pata_imx(&imx31_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h deleted file mode 100644 index 1b1bdadea15b..000000000000 --- a/arch/arm/mach-imx/devices-imx35.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "devices/devices-common.h" - -extern const struct imx_fec_data imx35_fec_data; -#define imx35_add_fec(pdata) \ - imx_add_fec(&imx35_fec_data, pdata) - -extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data; -#define imx35_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata) - -extern const struct imx_flexcan_data imx35_flexcan_data[]; -#define imx35_add_flexcan(id) \ - imx_add_flexcan(&imx35_flexcan_data[id]) -#define imx35_add_flexcan0() imx35_add_flexcan(0) -#define imx35_add_flexcan1() imx35_add_flexcan(1) - -extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; -#define imx35_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx35_imx2_wdt_data) - -extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; -#define imx35_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) -#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) -#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) -#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) - -extern const struct imx_imx_keypad_data imx35_imx_keypad_data; -#define imx35_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx35_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx35_imx_ssi_data[]; -#define imx35_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; -#define imx35_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) -#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) -#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) -#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) - -extern const struct imx_ipu_core_data imx35_ipu_core_data; -#define imx35_add_ipu_core() \ - imx_add_ipu_core(&imx35_ipu_core_data) -#define imx35_alloc_mx3_camera(pdata) \ - imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) -#define imx35_add_mx3_sdc_fb(pdata) \ - imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata) - -extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data; -#define imx35_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data; -#define imx35_add_mxc_ehci_hs(pdata) \ - imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata) - -extern const struct imx_mxc_nand_data imx35_mxc_nand_data; -#define imx35_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) - -extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data; -#define imx35_add_mxc_rtc() \ - imx_add_mxc_rtc(&imx35_mxc_rtc_data) - -extern const struct imx_mxc_w1_data imx35_mxc_w1_data; -#define imx35_add_mxc_w1() \ - imx_add_mxc_w1(&imx35_mxc_w1_data) - -extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; -#define imx35_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx35_cspi_data[]; -#define imx35_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx35_cspi_data[id], pdata) -#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) -#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) - -extern const struct imx_pata_imx_data imx35_pata_imx_data; -#define imx35_add_pata_imx() \ - imx_add_pata_imx(&imx35_pata_imx_data) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig deleted file mode 100644 index fdca73d117e6..000000000000 --- a/arch/arm/mach-imx/devices/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config IMX_HAVE_PLATFORM_FEC - bool - default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35 - -config IMX_HAVE_PLATFORM_FLEXCAN - bool - -config IMX_HAVE_PLATFORM_FSL_USB2_UDC - bool - -config IMX_HAVE_PLATFORM_GPIO_KEYS - bool - -config IMX_HAVE_PLATFORM_IMX21_HCD - bool - -config IMX_HAVE_PLATFORM_IMX27_CODA - bool - default y if SOC_IMX27 - -config IMX_HAVE_PLATFORM_IMX2_WDT - bool - -config IMX_HAVE_PLATFORM_IMX_FB - bool - -config IMX_HAVE_PLATFORM_IMX_I2C - bool - -config IMX_HAVE_PLATFORM_IMX_KEYPAD - bool - -config IMX_HAVE_PLATFORM_PATA_IMX - bool - -config IMX_HAVE_PLATFORM_IMX_SSI - bool - -config IMX_HAVE_PLATFORM_IMX_UART - bool - -config IMX_HAVE_PLATFORM_IPU_CORE - bool - -config IMX_HAVE_PLATFORM_MX2_CAMERA - bool - -config IMX_HAVE_PLATFORM_MX2_EMMA - bool - -config IMX_HAVE_PLATFORM_MXC_EHCI - bool - -config IMX_HAVE_PLATFORM_MXC_MMC - bool - -config IMX_HAVE_PLATFORM_MXC_NAND - bool - -config IMX_HAVE_PLATFORM_MXC_RTC - bool - -config IMX_HAVE_PLATFORM_MXC_W1 - bool - -config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - bool - -config IMX_HAVE_PLATFORM_SPI_IMX - bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile deleted file mode 100644 index e44758aaa11c..000000000000 --- a/arch/arm/mach-imx/devices/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-y := devices.o - -obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o -obj-y += platform-gpio-mxc.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o -obj-y += platform-imx-dma.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h deleted file mode 100644 index 327a1de7dce1..000000000000 --- a/arch/arm/mach-imx/devices/devices-common.h +++ /dev/null @@ -1,293 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/gpio/machine.h> -#include <linux/platform_data/dma-imx-sdma.h> - -extern struct device mxc_aips_bus; -extern struct device mxc_ahb_bus; - -static inline struct platform_device *imx_add_platform_device_dmamask( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask) -{ - struct platform_device_info pdevinfo = { - .name = name, - .id = id, - .res = res, - .num_res = num_resources, - .data = data, - .size_data = size_data, - .dma_mask = dmamask, - }; - return platform_device_register_full(&pdevinfo); -} - -static inline struct platform_device *imx_add_platform_device( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data) -{ - return imx_add_platform_device_dmamask( - name, id, res, num_resources, data, size_data, 0); -} - -#include <linux/fec.h> -struct imx_fec_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_fec( - const struct imx_fec_data *data, - const struct fec_platform_data *pdata); - -struct imx_flexcan_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_flexcan( - const struct imx_flexcan_data *data); - -#include <linux/fsl_devices.h> -struct imx_fsl_usb2_udc_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_fsl_usb2_udc( - const struct imx_fsl_usb2_udc_data *data, - const struct fsl_usb2_platform_data *pdata); - -#include <linux/gpio_keys.h> -struct platform_device *__init imx_add_gpio_keys( - const struct gpio_keys_platform_data *pdata); - -#include <linux/platform_data/usb-mx2.h> -struct imx_imx21_hcd_data { - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx21_hcd( - const struct imx_imx21_hcd_data *data, - const struct mx21_usbh_platform_data *pdata); - -struct imx_imx27_coda_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx27_coda( - const struct imx_imx27_coda_data *data); - -struct imx_imx2_wdt_data { - int id; - resource_size_t iobase; - resource_size_t iosize; -}; -struct platform_device *__init imx_add_imx2_wdt( - const struct imx_imx2_wdt_data *data); - -struct imx_imxdi_rtc_data { - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imxdi_rtc( - const struct imx_imxdi_rtc_data *data); - -#include <linux/platform_data/video-imxfb.h> -struct imx_imx_fb_data { - const char *devid; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx_fb( - const struct imx_imx_fb_data *data, - const struct imx_fb_platform_data *pdata); - -#include <linux/platform_data/i2c-imx.h> -struct imx_imx_i2c_data { - const char *devid; - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx_i2c( - const struct imx_imx_i2c_data *data, - const struct imxi2c_platform_data *pdata); - -#include <linux/input/matrix_keypad.h> -struct imx_imx_keypad_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx_keypad( - const struct imx_imx_keypad_data *data, - const struct matrix_keymap_data *pdata); - -#include <linux/platform_data/asoc-imx-ssi.h> -struct imx_imx_ssi_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; - resource_size_t dmatx0; - resource_size_t dmarx0; - resource_size_t dmatx1; - resource_size_t dmarx1; -}; -struct platform_device *__init imx_add_imx_ssi( - const struct imx_imx_ssi_data *data, - const struct imx_ssi_platform_data *pdata); - -#include <linux/platform_data/serial-imx.h> -struct imx_imx_uart_1irq_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_imx_uart_1irq( - const struct imx_imx_uart_1irq_data *data, - const struct imxuart_platform_data *pdata); - -#include <linux/platform_data/video-mx3fb.h> -#include <linux/platform_data/media/camera-mx3.h> -struct imx_ipu_core_data { - resource_size_t iobase; - resource_size_t synirq; - resource_size_t errirq; -}; -struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data); -struct platform_device *__init imx_alloc_mx3_camera( - const struct imx_ipu_core_data *data, - const struct mx3_camera_pdata *pdata); -struct platform_device *__init imx_add_mx3_sdc_fb( - const struct imx_ipu_core_data *data, - struct mx3fb_platform_data *pdata); - -#include <linux/platform_data/media/camera-mx2.h> -struct imx_mx2_camera_data { - const char *devid; - resource_size_t iobasecsi; - resource_size_t iosizecsi; - resource_size_t irqcsi; - resource_size_t iobaseemmaprp; - resource_size_t iosizeemmaprp; - resource_size_t irqemmaprp; -}; -struct platform_device *__init imx_add_mx2_camera( - const struct imx_mx2_camera_data *data, - const struct mx2_camera_platform_data *pdata); - - -struct imx_mx2_emma_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_emma_data *data); - -#include <linux/platform_data/usb-ehci-mxc.h> -struct imx_mxc_ehci_data { - int id; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mxc_ehci( - const struct imx_mxc_ehci_data *data, - const struct mxc_usbh_platform_data *pdata); - -#include <linux/platform_data/mmc-mxcmmc.h> -struct imx_mxc_mmc_data { - const char *devid; - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; - resource_size_t dmareq; -}; -struct platform_device *__init imx_add_mxc_mmc( - const struct imx_mxc_mmc_data *data, - const struct imxmmc_platform_data *pdata); - -#include <linux/platform_data/mtd-mxc_nand.h> -struct imx_mxc_nand_data { - const char *devid; - /* - * id is traditionally 0, but -1 is more appropriate. We use -1 for new - * machines but don't change existing devices as the nand device usually - * appears in the kernel command line to pass its partitioning. - */ - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t axibase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mxc_nand( - const struct imx_mxc_nand_data *data, - const struct mxc_nand_platform_data *pdata); - -struct imx_pata_imx_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_pata_imx( - const struct imx_pata_imx_data *data); - -/* mxc_rtc */ -struct imx_mxc_rtc_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mxc_rtc( - const struct imx_mxc_rtc_data *data); - -/* mxc_w1 */ -struct imx_mxc_w1_data { - resource_size_t iobase; -}; -struct platform_device *__init imx_add_mxc_w1( - const struct imx_mxc_w1_data *data); - -#include <linux/platform_data/mmc-esdhc-imx.h> -struct imx_sdhci_esdhc_imx_data { - const char *devid; - int id; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_sdhci_esdhc_imx( - const struct imx_sdhci_esdhc_imx_data *data, - const struct esdhc_platform_data *pdata); - -struct imx_spi_imx_data { - const char *devid; - int id; - resource_size_t iobase; - resource_size_t iosize; - int irq; -}; -struct platform_device *__init imx_add_spi_imx( - const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable); - -struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, - int irq); -struct platform_device *imx_add_imx_sdma(char *name, - resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c deleted file mode 100644 index cd72f0894196..000000000000 --- a/arch/arm/mach-imx/devices/devices.c +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/platform_device.h> - -#include "../common.h" -#include "devices-common.h" - -struct device mxc_aips_bus = { - .init_name = "mxc_aips", -}; - -struct device mxc_ahb_bus = { - .init_name = "mxc_ahb", -}; - -int __init mxc_device_init(void) -{ - int ret; - - ret = device_register(&mxc_aips_bus); - if (ret < 0) - goto done; - - ret = device_register(&mxc_ahb_bus); - -done: - return ret; -} diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c deleted file mode 100644 index 88e853d7fb01..000000000000 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> -#include <linux/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_fec_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _FEC_BASE_ADDR, \ - .irq = soc ## _INT_FEC, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_fec_data imx27_fec_data __initconst = - imx_fec_data_entry_single(MX27, "imx27-fec"); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX35 -/* i.mx35 has the i.mx27 type fec */ -const struct imx_fec_data imx35_fec_data __initconst = - imx_fec_data_entry_single(MX35, "imx27-fec"); -#endif - -struct platform_device *__init imx_add_fec( - const struct imx_fec_data *data, - const struct fec_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c deleted file mode 100644 index e4eed35c1fe2..000000000000 --- a/arch/arm/mach-imx/devices/platform-flexcan.c +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \ - { \ - .id = _id, \ - .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_CAN ## _hwid, \ - } - -#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX35 -const struct imx_flexcan_data imx35_flexcan_data[] __initconst = { -#define imx35_flexcan_data_entry(_id, _hwid) \ - imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K) - imx35_flexcan_data_entry(0, 1), - imx35_flexcan_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_flexcan( - const struct imx_flexcan_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("flexcan", data->id, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c deleted file mode 100644 index cc86de4d7acb..000000000000 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _USB_OTG_BASE_ADDR, \ - .irq = soc ## _INT_USB_OTG, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_fsl_usb2_udc( - const struct imx_fsl_usb2_udc_data *data, - const struct fsl_usb2_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask(data->devid, -1, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c deleted file mode 100644 index 355de845224c..000000000000 --- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Limited - */ -#include "devices-common.h" -#include "../common.h" - -struct platform_device *__init mxc_register_gpio(char *name, int id, - resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) -{ - struct resource res[] = { - { - .start = iobase, - .end = iobase + iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - }, { - .start = irq_high, - .end = irq_high, - .flags = IORESOURCE_IRQ, - }, - }; - unsigned int nres; - - nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1; - return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c deleted file mode 100644 index 488678403ac8..000000000000 --- a/arch/arm/mach-imx/devices/platform-gpio_keys.c +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ -#include <linux/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -struct platform_device *__init imx_add_gpio_keys( - const struct gpio_keys_platform_data *pdata) -{ - return imx_add_platform_device("gpio-keys", -1, NULL, - 0, pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c deleted file mode 100644 index 12656f24ad0d..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-dma.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "devices-common.h" - -struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, - resource_size_t iobase, int irq) -{ - struct resource res[] = { - { - .start = iobase, - .end = iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return platform_device_register_resndata(&mxc_ahb_bus, - name, -1, res, ARRAY_SIZE(res), NULL, 0); -} - -struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, - resource_size_t iobase, int irq, struct sdma_platform_data *pdata) -{ - struct resource res[] = { - { - .start = iobase, - .end = iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return platform_device_register_resndata(&mxc_ahb_bus, name, - -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c deleted file mode 100644 index e553d014506a..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_fb_data_entry_single(soc, _devid, _size) \ - { \ - .devid = _devid, \ - .iobase = soc ## _LCDC_BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_LCDC, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx_fb_data imx21_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx_fb_data imx27_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -struct platform_device *__init imx_add_imx_fb( - const struct imx_imx_fb_data *data, - const struct imx_fb_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c deleted file mode 100644 index 81d317bfadd8..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \ - { \ - .devid = _devid, \ - .id = _id, \ - .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_I2C ## _hwid, \ - } - -#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ - [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { -#define imx27_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K) - imx27_imx_i2c_data_entry(0, 1), - imx27_imx_i2c_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { -#define imx31_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K) - imx31_imx_i2c_data_entry(0, 1), - imx31_imx_i2c_data_entry(1, 2), - imx31_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { -#define imx35_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K) - imx35_imx_i2c_data_entry(0, 1), - imx35_imx_i2c_data_entry(1, 2), - imx35_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_imx_i2c( - const struct imx_imx_i2c_data *data, - const struct imxi2c_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device(data->devid, data->id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c deleted file mode 100644 index de2e03ec2d89..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-keypad.c +++ /dev/null @@ -1,54 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_keypad_data_entry_single(soc, _size) \ - { \ - .iobase = soc ## _KPP_BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_KPP, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX21, SZ_16); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX27, SZ_16); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX31, SZ_16); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX35, SZ_16); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_imx_keypad( - const struct imx_imx_keypad_data *data, - const struct matrix_keymap_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imx-keypad", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c deleted file mode 100644 index ed8c66438af0..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-ssi.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ - [_id] = { \ - .id = _id, \ - .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_SSI ## _hwid, \ - .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ - .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ - .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ - .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { -#define imx21_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) - imx21_imx_ssi_data_entry(0, 1), - imx21_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { -#define imx27_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) - imx27_imx_ssi_data_entry(0, 1), - imx27_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { -#define imx31_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) - imx31_imx_ssi_data_entry(0, 1), - imx31_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { -#define imx35_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) - imx35_imx_ssi_data_entry(0, 1), - imx35_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_imx_ssi( - const struct imx_imx_ssi_data *data, - const struct imx_ssi_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, -#define DMARES(_name) { \ - .name = #_name, \ - .start = data->dma ## _name, \ - .end = data->dma ## _name, \ - .flags = IORESOURCE_DMA, \ -} - DMARES(tx0), - DMARES(rx0), - DMARES(tx1), - DMARES(rx1), - }; - - return imx_add_platform_device("imx-ssi", data->id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c deleted file mode 100644 index c8f01deedd80..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ - [_id] = { \ - .id = _id, \ - .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irqrx = soc ## _INT_UART ## _hwid ## RX, \ - .irqtx = soc ## _INT_UART ## _hwid ## TX, \ - .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ - } - -#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ - [_id] = { \ - .id = _id, \ - .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_UART ## _hwid, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { -#define imx21_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) - imx21_imx_uart_data_entry(0, 1), - imx21_imx_uart_data_entry(1, 2), - imx21_imx_uart_data_entry(2, 3), - imx21_imx_uart_data_entry(3, 4), -}; -#endif - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { -#define imx27_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) - imx27_imx_uart_data_entry(0, 1), - imx27_imx_uart_data_entry(1, 2), - imx27_imx_uart_data_entry(2, 3), - imx27_imx_uart_data_entry(3, 4), - imx27_imx_uart_data_entry(4, 5), - imx27_imx_uart_data_entry(5, 6), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { -#define imx31_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) - imx31_imx_uart_data_entry(0, 1), - imx31_imx_uart_data_entry(1, 2), - imx31_imx_uart_data_entry(2, 3), - imx31_imx_uart_data_entry(3, 4), - imx31_imx_uart_data_entry(4, 5), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { -#define imx35_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K) - imx35_imx_uart_data_entry(0, 1), - imx35_imx_uart_data_entry(1, 2), - imx35_imx_uart_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_imx_uart_1irq( - const struct imx_imx_uart_1irq_data *data, - const struct imxuart_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - /* i.mx21 type uart runs on all i.mx except i.mx1 */ - return imx_add_platform_device("imx21-uart", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c deleted file mode 100644 index fdd355ae4d5f..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \ - { \ - .id = _id, \ - .iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - } -#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_imx2_wdt( - const struct imx_imx2_wdt_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, - }; - return imx_add_platform_device("imx2-wdt", data->id, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c deleted file mode 100644 index f55763c36d26..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx21-hcd.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx21_hcd_data_entry_single(soc) \ - { \ - .iobase = soc ## _USBOTG_BASE_ADDR, \ - .irq = soc ## _INT_USBHOST, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst = - imx_imx21_hcd_data_entry_single(MX21); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -struct platform_device *__init imx_add_imx21_hcd( - const struct imx_imx21_hcd_data *data, - const struct mx21_usbh_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("imx21-hcd", 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c deleted file mode 100644 index 66a116e6c6bc..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx27-coda.c +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 Vista Silicon - * Javier Martin <javier.martin@vista-silicon.com> - */ - -#include "../hardware.h" -#include "devices-common.h" - -#ifdef CONFIG_SOC_IMX27 -const struct imx_imx27_coda_data imx27_coda_data __initconst = { - .iobase = MX27_VPU_BASE_ADDR, - .iosize = SZ_512, - .irq = MX27_INT_VPU, -}; -#endif - -struct platform_device *__init imx_add_imx27_coda( - const struct imx_imx27_coda_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL, - 0, DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c deleted file mode 100644 index b4290760f49f..000000000000 --- a/arch/arm/mach-imx/devices/platform-ipu-core.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_ipu_core_entry_single(soc) \ -{ \ - .iobase = soc ## _IPU_CTRL_BASE_ADDR, \ - .synirq = soc ## _INT_IPU_SYN, \ - .errirq = soc ## _INT_IPU_ERR, \ -} - -#ifdef CONFIG_SOC_IMX31 -const struct imx_ipu_core_data imx31_ipu_core_data __initconst = - imx_ipu_core_entry_single(MX31); -#endif - -#ifdef CONFIG_SOC_IMX35 -const struct imx_ipu_core_data imx35_ipu_core_data __initconst = - imx_ipu_core_entry_single(MX35); -#endif - -static struct platform_device *imx_ipu_coredev __initdata; - -struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data) -{ - /* The resource order is important! */ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + 0x5f, - .flags = IORESOURCE_MEM, - }, { - .start = data->iobase + 0x88, - .end = data->iobase + 0xb3, - .flags = IORESOURCE_MEM, - }, { - .start = data->synirq, - .end = data->synirq, - .flags = IORESOURCE_IRQ, - }, { - .start = data->errirq, - .end = data->errirq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1, - res, ARRAY_SIZE(res), NULL, 0); -} - -struct platform_device *__init imx_alloc_mx3_camera( - const struct imx_ipu_core_data *data, - const struct mx3_camera_pdata *pdata) -{ - struct resource res[] = { - { - .start = data->iobase + 0x60, - .end = data->iobase + 0x87, - .flags = IORESOURCE_MEM, - }, - }; - int ret = -ENOMEM; - struct platform_device *pdev; - - if (IS_ERR_OR_NULL(imx_ipu_coredev)) - return ERR_PTR(-ENODEV); - - pdev = platform_device_alloc("mx3-camera", 0); - if (!pdev) - return ERR_PTR(-ENOMEM); - - pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) - goto err; - - *pdev->dev.dma_mask = DMA_BIT_MASK(32); - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); - if (ret) - goto err; - - if (pdata) { - struct mx3_camera_pdata *copied_pdata; - - ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); - if (ret) { -err: - kfree(pdev->dev.dma_mask); - platform_device_put(pdev); - return ERR_PTR(-ENODEV); - } - copied_pdata = dev_get_platdata(&pdev->dev); - copied_pdata->dma_dev = &imx_ipu_coredev->dev; - } - - return pdev; -} - -struct platform_device *__init imx_add_mx3_sdc_fb( - const struct imx_ipu_core_data *data, - struct mx3fb_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase + 0xb4, - .end = data->iobase + 0x1bf, - .flags = IORESOURCE_MEM, - }, - }; - - if (IS_ERR_OR_NULL(imx_ipu_coredev)) - return ERR_PTR(-ENODEV); - - pdata->dma_dev = &imx_ipu_coredev->dev; - - return imx_add_platform_device_dmamask("mx3_sdc_fb", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata), - DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c deleted file mode 100644 index 5375f8b3d079..000000000000 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mx2_camera_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobasecsi = soc ## _CSI_BASE_ADDR, \ - .iosizecsi = SZ_4K, \ - .irqcsi = soc ## _INT_CSI, \ - } -#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \ - { \ - .devid = _devid, \ - .iobasecsi = soc ## _CSI_BASE_ADDR, \ - .iosizecsi = SZ_32, \ - .irqcsi = soc ## _INT_CSI, \ - .iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \ - .iosizeemmaprp = SZ_32, \ - .irqemmaprp = soc ## _INT_EMMAPRP, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -struct platform_device *__init imx_add_mx2_camera( - const struct imx_mx2_camera_data *data, - const struct mx2_camera_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobasecsi, - .end = data->iobasecsi + data->iosizecsi - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqcsi, - .end = data->irqcsi, - .flags = IORESOURCE_IRQ, - }, { - .start = data->iobaseemmaprp, - .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqemmaprp, - .end = data->irqemmaprp, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask(data->devid, 0, - res, data->iobaseemmaprp ? 4 : 2, - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} - diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c deleted file mode 100644 index 20f28ba16f36..000000000000 --- a/arch/arm/mach-imx/devices/platform-mx2-emma.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mx2_emmaprp_data_entry_single(soc) \ - { \ - .iobase = soc ## _EMMAPRP_BASE_ADDR, \ - .iosize = SZ_256, \ - .irq = soc ## _INT_EMMAPRP, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = - imx_mx2_emmaprp_data_entry_single(MX27); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_emma_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("m2m-emmaprp", 0, - res, 2, NULL, 0, DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c deleted file mode 100644 index d9d7cc71633f..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \ - { \ - .id = _id, \ - .iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \ - .irq = soc ## _INT_USB_ ## hs, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX27, 0, OTG); -const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = { - imx_mxc_ehci_data_entry_single(MX27, 1, HS1), - imx_mxc_ehci_data_entry_single(MX27, 2, HS2), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX31, 0, OTG); -const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = { - imx_mxc_ehci_data_entry_single(MX31, 1, HS1), - imx_mxc_ehci_data_entry_single(MX31, 2, HS2), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX35, 0, OTG); -const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst = - imx_mxc_ehci_data_entry_single(MX35, 1, HS); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_mxc_ehci( - const struct imx_mxc_ehci_data *data, - const struct mxc_usbh_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("mxc-ehci", data->id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c deleted file mode 100644 index cd4c502bc152..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc-mmc.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/dma-mapping.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \ - { \ - .devid = _devid, \ - .id = _id, \ - .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_SDHC ## _hwid, \ - .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \ - } -#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \ - [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { -#define imx21_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K) - imx21_mxc_mmc_data_entry(0, 1), - imx21_mxc_mmc_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { -#define imx27_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K) - imx27_mxc_mmc_data_entry(0, 1), - imx27_mxc_mmc_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = { -#define imx31_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K) - imx31_mxc_mmc_data_entry(0, 1), - imx31_mxc_mmc_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -struct platform_device *__init imx_add_mxc_mmc( - const struct imx_mxc_mmc_data *data, - const struct imxmmc_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, { - .start = data->dmareq, - .end = data->dmareq, - .flags = IORESOURCE_DMA, - }, - }; - return imx_add_platform_device_dmamask(data->devid, data->id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c deleted file mode 100644 index 0f5f741f897f..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \ - { \ - .devid = _devid, \ - .iobase = soc ## _NFC_BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_NFC \ - } - -#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \ - { \ - .devid = _devid, \ - .id = -1, \ - .iobase = soc ## _NFC_BASE_ADDR, \ - .iosize = _size, \ - .axibase = soc ## _NFC_AXI_BASE_ADDR, \ - .irq = soc ## _INT_NFC \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K); -#endif - -#ifdef CONFIG_SOC_IMX35 -const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K); -#endif - -struct platform_device *__init imx_add_mxc_nand( - const struct imx_mxc_nand_data *data, - const struct mxc_nand_platform_data *pdata) -{ - /* AXI has to come first, that's how the mxc_nand driver expect it */ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, { - .start = data->axibase, - .end = data->axibase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - }; - return imx_add_platform_device(data->devid, data->id, - res, ARRAY_SIZE(res) - !data->axibase, - pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c deleted file mode 100644 index 0c746de1dd1d..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_rtc.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010-2011 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_rtc_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _RTC_BASE_ADDR, \ - .irq = soc ## _INT_RTC, \ - } - -#ifdef CONFIG_SOC_IMX31 -const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc"); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc"); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_mxc_rtc( - const struct imx_mxc_rtc_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device(data->devid, -1, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c deleted file mode 100644 index ab42c6b0542c..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_w1.c +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_w1_data_entry_single(soc) \ - { \ - .iobase = soc ## _OWIRE_BASE_ADDR, \ - } - -#ifdef CONFIG_SOC_IMX21 -const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst = - imx_mxc_w1_data_entry_single(MX21); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst = - imx_mxc_w1_data_entry_single(MX27); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst = - imx_mxc_w1_data_entry_single(MX31); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst = - imx_mxc_w1_data_entry_single(MX35); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_mxc_w1( - const struct imx_mxc_w1_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - }; - - return imx_add_platform_device("mxc_w1", 0, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c deleted file mode 100644 index 0e985fffba78..000000000000 --- a/arch/arm/mach-imx/devices/platform-pata_imx.c +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#include "../hardware.h" -#include "devices-common.h" - -#define imx_pata_imx_data_entry_single(soc, _size) \ - { \ - .iobase = soc ## _ATA_BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_ATA, \ - } - -#ifdef CONFIG_SOC_IMX27 -const struct imx_pata_imx_data imx27_pata_imx_data __initconst = - imx_pata_imx_data_entry_single(MX27, SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_pata_imx_data imx31_pata_imx_data __initconst = - imx_pata_imx_data_entry_single(MX31, SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_pata_imx_data imx35_pata_imx_data __initconst = - imx_pata_imx_data_entry_single(MX35, SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_pata_imx( - const struct imx_pata_imx_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device("pata_imx", -1, - res, ARRAY_SIZE(res), NULL, 0); -} - diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c deleted file mode 100644 index 40c261071144..000000000000 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de> - */ - -#include <linux/platform_data/mmc-esdhc-imx.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ - { \ - .devid = _devid, \ - .id = _id, \ - .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ - .irq = soc ## _INT_ESDHC ## hwid, \ - } - -#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \ - [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid) - -#ifdef CONFIG_SOC_IMX35 -const struct imx_sdhci_esdhc_imx_data -imx35_sdhci_esdhc_imx_data[] __initconst = { -#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid) - imx35_sdhci_esdhc_imx_data_entry(0, 1), - imx35_sdhci_esdhc_imx_data_entry(1, 2), - imx35_sdhci_esdhc_imx_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -static const struct esdhc_platform_data default_esdhc_pdata __initconst = { - .wp_type = ESDHC_WP_NONE, - .cd_type = ESDHC_CD_NONE, -}; - -struct platform_device *__init imx_add_sdhci_esdhc_imx( - const struct imx_sdhci_esdhc_imx_data *data, - const struct esdhc_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - /* - * If machine does not provide pdata, use the default one - * which means no WP/CD support - */ - if (!pdata) - pdata = &default_esdhc_pdata; - - return imx_add_platform_device_dmamask(data->devid, data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata), - DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c deleted file mode 100644 index 27747bf628a3..000000000000 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ -#include <linux/gpio/machine.h> -#include "../hardware.h" -#include "devices-common.h" - -#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ - { \ - .devid = _devid, \ - .id = _id, \ - .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_ ## type ## hwid, \ - } - -#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ - [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { -#define imx21_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) - imx21_cspi_data_entry(0, 1), - imx21_cspi_data_entry(1, 2), -}; -#endif - -#ifdef CONFIG_SOC_IMX27 -const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { -#define imx27_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) - imx27_cspi_data_entry(0, 1), - imx27_cspi_data_entry(1, 2), - imx27_cspi_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX31 -const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { -#define imx31_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) - imx31_cspi_data_entry(0, 1), - imx31_cspi_data_entry(1, 2), - imx31_cspi_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { -#define imx35_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) - imx35_cspi_data_entry(0, 1), - imx35_cspi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX35 */ - -struct platform_device *__init imx_add_spi_imx( - const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - if (gtable) - gpiod_add_lookup_table(gtable); - return imx_add_platform_device(data->devid, data->id, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c deleted file mode 100644 index 83962ce75983..000000000000 --- a/arch/arm/mach-imx/ehci-imx27.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/usb-ehci-mxc.h> - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX27_OTG_SIC_SHIFT 29 -#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT) -#define MX27_OTG_PM_BIT (1 << 24) - -#define MX27_H2_SIC_SHIFT 21 -#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT) -#define MX27_H2_PM_BIT (1 << 16) -#define MX27_H2_DT_BIT (1 << 5) - -#define MX27_H1_SIC_SHIFT 13 -#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT) -#define MX27_H1_PM_BIT (1 << 8) -#define MX27_H1_DT_BIT (1 << 4) - -int mx27_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX27_OTG_PM_BIT; - break; - case 1: /* H1 port */ - v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX27_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX27_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX27_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX27_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} - diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c deleted file mode 100644 index d6d794d53a63..000000000000 --- a/arch/arm/mach-imx/ehci-imx31.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/usb-ehci-mxc.h> - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) -#define MX31_OTG_PM_BIT (1 << 24) - -#define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) -#define MX31_H2_PM_BIT (1 << 16) -#define MX31_H2_DT_BIT (1 << 5) - -#define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) -#define MX31_H1_PM_BIT (1 << 8) -#define MX31_H1_DT_BIT (1 << 4) - -int mx31_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c deleted file mode 100644 index e6ba965c5c5b..000000000000 --- a/arch/arm/mach-imx/ehci-imx35.c +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/usb-ehci-mxc.h> - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX35_OTG_SIC_SHIFT 29 -#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) -#define MX35_OTG_PM_BIT (1 << 24) -#define MX35_OTG_PP_BIT (1 << 11) -#define MX35_OTG_OCPOL_BIT (1 << 3) - -#define MX35_H1_SIC_SHIFT 21 -#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) -#define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 16) -#define MX35_H1_IPPUE_UP_BIT (1 << 7) -#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX35_H1_TLL_BIT (1 << 5) -#define MX35_H1_USBTE_BIT (1 << 4) -#define MX35_H1_OCPOL_BIT (1 << 2) - -int mx35_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | - MX35_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX35_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX35_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | - MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT | - MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX35_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX35_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h deleted file mode 100644 index b7ad6175f5bf..000000000000 --- a/arch/arm/mach-imx/ehci.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MACH_IMX_EHCI_H -#define __MACH_IMX_EHCI_H - -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) -#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) -#define MXC_EHCI_TTL_ENABLED (1 << 8) - -#define MXC_EHCI_INTERNAL_PHY (1 << 9) -#define MXC_EHCI_IPPUE_DOWN (1 << 10) -#define MXC_EHCI_IPPUE_UP (1 << 11) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) - -#define MXC_USBCTRL_OFFSET 0 -#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 -#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc -#define MXC_USBH2CTRL_OFFSET 0x14 - -int mx25_initialize_usb_hw(int port, unsigned int flags); -int mx31_initialize_usb_hw(int port, unsigned int flags); -int mx35_initialize_usb_hw(int port, unsigned int flags); -int mx27_initialize_usb_hw(int port, unsigned int flags); - -#endif /* __MACH_IMX_EHCI_H */ diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 92c5a9c9f94b..7acf7ce467ed 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -97,7 +97,6 @@ #include "mx31.h" #include "mx35.h" #include "mx2x.h" -#include "mx21.h" #include "mx27.h" #define imx_map_entry(soc, name, _type) { \ diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c deleted file mode 100644 index 29d97bd64381..000000000000 --- a/arch/arm/mach-imx/imx27-dt.c +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 Sascha Hauer, Pengutronix - */ - -#include <linux/irq.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "mx27.h" - -static const char * const imx27_dt_board_compat[] __initconst = { - "fsl,imx27", - NULL -}; - -DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_late = imx27_pm_init, - .dt_compat = imx27_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c deleted file mode 100644 index abfc306655c8..000000000000 --- a/arch/arm/mach-imx/iomux-imx31.c +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> - */ -#include <linux/gpio.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/kernel.h> - -#include "hardware.h" -#include "iomux-mx3.h" - -/* - * IOMUX register (base) addresses - */ -#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) -#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) -#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) -#define IOMUXGPR (IOMUX_BASE + 0x008) -#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) -#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) - -static DEFINE_SPINLOCK(gpio_mux_lock); - -#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) - -static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32); -/* - * set the mode for a IOMUX pin. - */ -void mxc_iomux_mode(unsigned int pin_mode) -{ - u32 field; - u32 l; - u32 mode; - void __iomem *reg; - - reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); - field = pin_mode & 0x3; - mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; - - spin_lock(&gpio_mux_lock); - - l = imx_readl(reg); - l &= ~(0xff << (field * 8)); - l |= mode << (field * 8); - imx_writel(l, reg); - - spin_unlock(&gpio_mux_lock); -} - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) -{ - u32 field, l; - void __iomem *reg; - - pin &= IOMUX_PADNUM_MASK; - reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; - field = (pin + 2) % 3; - - pr_debug("%s: reg offset = 0x%x, field = %d\n", - __func__, (pin + 2) / 3, field); - - spin_lock(&gpio_mux_lock); - - l = imx_readl(reg); - l &= ~(0x1ff << (field * 10)); - l |= config << (field * 10); - imx_writel(l, reg); - - spin_unlock(&gpio_mux_lock); -} - -/* - * allocs a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - */ -int mxc_iomux_alloc_pin(unsigned int pin, const char *label) -{ - unsigned pad = pin & IOMUX_PADNUM_MASK; - - if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n", - pad, label ? label : "?"); - return -EINVAL; - } - - if (test_and_set_bit(pad, mxc_pin_alloc_map)) { - printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", - pad, label ? label : "?"); - return -EBUSY; - } - mxc_iomux_mode(pin); - - return 0; -} - -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label) -{ - const unsigned int *p = pin_list; - int i; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - ret = mxc_iomux_alloc_pin(*p, label); - if (ret) - goto setup_error; - p++; - } - return 0; - -setup_error: - mxc_iomux_release_multiple_pins(pin_list, i); - return ret; -} - -void mxc_iomux_release_pin(unsigned int pin) -{ - unsigned pad = pin & IOMUX_PADNUM_MASK; - - if (pad < (PIN_MAX + 1)) - clear_bit(pad, mxc_pin_alloc_map); -} - -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) -{ - const unsigned int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - mxc_iomux_release_pin(*p); - p++; - } -} - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) -{ - u32 l; - - spin_lock(&gpio_mux_lock); - l = imx_readl(IOMUXGPR); - if (en) - l |= gp; - else - l &= ~gp; - - imx_writel(l, IOMUXGPR); - spin_unlock(&gpio_mux_lock); -} diff --git a/arch/arm/mach-imx/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h deleted file mode 100644 index 6eab3478fb80..000000000000 --- a/arch/arm/mach-imx/iomux-mx21.h +++ /dev/null @@ -1,109 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - */ -#ifndef __MACH_IOMUX_MX21_H__ -#define __MACH_IOMUX_MX21_H__ - -#include "iomux-mx2x.h" -#include "iomux-v1.h" - -/* Primary GPIO pin functions */ - -#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5) -#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6) -#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9) -#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10) -#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11) -#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12) -#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13) -#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17) -#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18) -#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19) -#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0) -#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1) -#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2) -#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16) - -/* Alternate GPIO pin functions */ - -#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5) -#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6) -#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7) -#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8) -#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9) -#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10) -#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11) -#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12) -#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13) -#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14) -#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15) -#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16) -#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17) -#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21) -#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22) -#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23) -#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29) -#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30) - -/* AIN GPIO pin functions */ - -#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21) -#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22) -#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23) -#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24) -#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8) -#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0) -#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1) -#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2) -#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3) -#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4) -#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5) - -/* BIN GPIO pin functions */ - -#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) -#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27) - -/* CIN GPIO pin functions */ - -#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26) - -/* AOUT GPIO pin functions */ - -#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29) -#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19) -#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20) -#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25) -#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26) -#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9) -#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6) -#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7) -#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8) -#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9) -#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10) -#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11) -#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12) -#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13) -#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14) - -#endif /* ifndef __MACH_IOMUX_MX21_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h deleted file mode 100644 index 4d848d1ef1e3..000000000000 --- a/arch/arm/mach-imx/iomux-mx27.h +++ /dev/null @@ -1,192 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - */ -#ifndef __MACH_IOMUX_MX27_H__ -#define __MACH_IOMUX_MX27_H__ - -#include "iomux-mx2x.h" -#include "iomux-v1.h" - -/* Primary GPIO pin functions */ - -#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0) -#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2) -#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4) -#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22) -#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6) -#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7) -#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8) -#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10) -#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12) -#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19) -#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0) -#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1) -#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2) -#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3) -#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4) -#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5) -#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6) -#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7) -#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8) -#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9) -#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10) -#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11) -#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12) -#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13) -#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14) -#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15) -#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16) -#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0) -#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1) -#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2) -#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24) -#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25) -#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1) -#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3) -#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7) -#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8) -#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9) -#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10) -#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11) -#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12) -#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13) -#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14) -#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16) -#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17) -#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18) -#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19) -#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20) -#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23) - -/* Alternate GPIO pin functions */ - -#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4) -#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5) -#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6) -#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7) -#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8) -#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21) -#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8) -#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24) -#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25) -#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26) -#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27) -#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1) -#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6) -#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7) -#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9) -#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2) -#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3) -#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4) -#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8) -#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10) -#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11) -#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12) -#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13) -#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14) -#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15) -#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16) -#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1) -#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3) -#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5) -#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7) -#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8) -#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9) -#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10) -#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11) -#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12) -#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13) -#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14) -#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15) -#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16) -#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17) -#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18) -#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19) -#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20) -#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22) -#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23) - -/* AIN GPIO pin functions */ - -#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14) -#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16) -#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23) - -/* BIN GPIO pin functions */ - -#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14) - -/* CIN GPIO pin functions */ - -#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2) -#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3) -#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4) -#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5) -#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6) -#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7) -#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8) -#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9) -#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10) -#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11) -#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12) -#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13) -#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14) -#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15) -#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16) -#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23) -#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27) -/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */ - -/* AOUT GPIO pin functions */ - -#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13) -#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15) - -/* BOUT GPIO pin functions */ - -#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17) -#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18) -#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19) -#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28) -#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29) -#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30) -#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31) - -#endif /* __MACH_IOMUX_MX27_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h deleted file mode 100644 index ce6b6d20a4f0..000000000000 --- a/arch/arm/mach-imx/iomux-mx2x.h +++ /dev/null @@ -1,217 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - */ -#ifndef __MACH_IOMUX_MX2x_H__ -#define __MACH_IOMUX_MX2x_H__ - -/* Primary GPIO pin functions */ - -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31) -#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4) -#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5) -#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6) -#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7) -#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8) -#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21) -#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24) -#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28) -#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29) -#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30) -#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31) -#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23) -#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4) -#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15) -#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16) -#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17) -#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18) -#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19) -#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20) -#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21) -#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22) -#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23) -#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0) -#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2) -#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4) -#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5) -#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6) -#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15) -#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21) -#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22) - -/* Alternate GPIO pin functions */ - -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31) -#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28) -#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29) -#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30) -#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31) -#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19) -#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20) -#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21) -#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22) -#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23) -#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24) -#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26) -#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0) -#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1) -#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2) -#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3) -#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4) -#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6) -#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7) -#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23) - -/* AIN GPIO pin functions */ - -#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6) -#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7) -#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8) -#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11) -#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13) -#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15) -#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19) -#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21) -#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22) -#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24) -#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25) -#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26) -#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27) -#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6) -#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7) -#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8) -#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9) -#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25) -#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26) -#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27) -#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28) -#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29) -#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30) -#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31) -#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5) -#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6) -#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7) -#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8) -#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9) -#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10) -#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11) -#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12) -#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13) -#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5) - -/* BIN GPIO pin functions */ - -#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5) - -/* CIN GPIO pin functions */ - -#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14) -#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15) -#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16) -#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17) -#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18) -#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19) -#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20) -#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21) -#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30) -#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5) - -/* AOUT GPIO pin functions */ - -#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29) -#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31) -#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8) -#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15) -#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21) - -#endif /* ifndef __MACH_IOMUX_MX2x_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h deleted file mode 100644 index 99270a183d47..000000000000 --- a/arch/arm/mach-imx/iomux-mx3.h +++ /dev/null @@ -1,706 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - */ -#ifndef __MACH_IOMUX_MX3_H__ -#define __MACH_IOMUX_MX3_H__ - -#include <linux/types.h> -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * various IOMUX pad functions - */ -enum iomux_pad_config { - PAD_CTL_NOLOOPBACK = 0x0 << 9, - PAD_CTL_LOOPBACK = 0x1 << 9, - PAD_CTL_PKE_NONE = 0x0 << 8, - PAD_CTL_PKE_ENABLE = 0x1 << 8, - PAD_CTL_PUE_KEEPER = 0x0 << 7, - PAD_CTL_PUE_PUD = 0x1 << 7, - PAD_CTL_100K_PD = 0x0 << 5, - PAD_CTL_100K_PU = 0x1 << 5, - PAD_CTL_47K_PU = 0x2 << 5, - PAD_CTL_22K_PU = 0x3 << 5, - PAD_CTL_HYS_CMOS = 0x0 << 4, - PAD_CTL_HYS_SCHMITZ = 0x1 << 4, - PAD_CTL_ODE_CMOS = 0x0 << 3, - PAD_CTL_ODE_OpenDrain = 0x1 << 3, - PAD_CTL_DRV_NORMAL = 0x0 << 1, - PAD_CTL_DRV_HIGH = 0x1 << 1, - PAD_CTL_DRV_MAX = 0x2 << 1, - PAD_CTL_SRE_SLOW = 0x0 << 0, - PAD_CTL_SRE_FAST = 0x1 << 0 -}; - -/* - * various IOMUX general purpose functions - */ -enum iomux_gp_func { - MUX_PGP_FIRI = 1 << 0, - MUX_DDR_MODE = 1 << 1, - MUX_PGP_CSPI_BB = 1 << 2, - MUX_PGP_ATA_1 = 1 << 3, - MUX_PGP_ATA_2 = 1 << 4, - MUX_PGP_ATA_3 = 1 << 5, - MUX_PGP_ATA_4 = 1 << 6, - MUX_PGP_ATA_5 = 1 << 7, - MUX_PGP_ATA_6 = 1 << 8, - MUX_PGP_ATA_7 = 1 << 9, - MUX_PGP_ATA_8 = 1 << 10, - MUX_PGP_UH2 = 1 << 11, - MUX_SDCTL_CSD0_SEL = 1 << 12, - MUX_SDCTL_CSD1_SEL = 1 << 13, - MUX_CSPI1_UART3 = 1 << 14, - MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, - MUX_TAMPER_DETECT_EN = 1 << 16, - MUX_PGP_USB_4WIRE = 1 << 17, - MUX_PGP_USB_COMMON = 1 << 18, - MUX_SDHC_MEMSTICK1 = 1 << 19, - MUX_SDHC_MEMSTICK2 = 1 << 20, - MUX_PGP_SPLL_BYP = 1 << 21, - MUX_PGP_UPLL_BYP = 1 << 22, - MUX_PGP_MSHC1_CLK_SEL = 1 << 23, - MUX_PGP_MSHC2_CLK_SEL = 1 << 24, - MUX_CSPI3_UART5_SEL = 1 << 25, - MUX_PGP_ATA_9 = 1 << 26, - MUX_PGP_USB_SUSPEND = 1 << 27, - MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, - MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, - MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, - MUX_CLKO_DDR_MODE = 1 << 31, -}; - -/* - * setups a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib - */ -int mxc_iomux_alloc_pin(unsigned int pin, const char *label); -/* - * setups multiple pins - * convenient way to call the above function with tables - */ -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label); - -/* - * releases a single pin: - * - make it available for a future use by another driver - * - frees the GPIO if the pin was configured as GPIO - * - DOES NOT reconfigure the IOMUX in its reset state - */ -void mxc_iomux_release_pin(unsigned int pin); -/* - * releases multiple pins - * convenvient way to call the above function with tables - */ -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func, bool en); - -/* - * This function only configures the iomux hardware. - * It is called by the setup functions and should not be called directly anymore. - * It is here visible for backward compatibility - */ -void mxc_iomux_mode(unsigned int pin_mode); - -#define IOMUX_PADNUM_MASK 0x1ff -#define IOMUX_GPIONUM_SHIFT 9 -#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) -#define IOMUX_MODE_SHIFT 17 -#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) - -#define IOMUX_PIN(gpionum, padnum) \ - (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ - (padnum & IOMUX_PADNUM_MASK)) - -#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) - -#define IOMUX_TO_GPIO(iomux_pin) \ - ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) - -/* - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ - -enum iomux_pins { - MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), - MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), - MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), - MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), - MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), - MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), - MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), - MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), - MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), - MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), - MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), - MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), - MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), - MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), - MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), - MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), - MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), - MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), - MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), - MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), - MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), - MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), - MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), - MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), - MX31_PIN_READ = IOMUX_PIN(0xff, 24), - MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), - MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), - MX31_PIN_SER_RS = IOMUX_PIN(89, 27), - MX31_PIN_LCS1 = IOMUX_PIN(88, 28), - MX31_PIN_LCS0 = IOMUX_PIN(87, 29), - MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), - MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), - MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), - MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), - MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), - MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), - MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), - MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), - MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), - MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), - MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), - MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), - MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), - MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), - MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), - MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), - MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), - MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), - MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), - MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), - MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), - MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), - MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), - MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), - MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), - MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), - MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), - MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), - MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), - MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), - MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), - MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), - MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), - MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), - MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), - MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), - MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), - MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), - MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), - MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), - MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), - MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), - MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), - MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), - MX31_PIN_USB_OC = IOMUX_PIN(30, 74), - MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), - MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), - MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), - MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), - MX31_PIN_TDO = IOMUX_PIN(0xff, 79), - MX31_PIN_TDI = IOMUX_PIN(0xff, 80), - MX31_PIN_TMS = IOMUX_PIN(0xff, 81), - MX31_PIN_TCK = IOMUX_PIN(0xff, 82), - MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), - MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), - MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), - MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), - MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), - MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), - MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), - MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), - MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), - MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), - MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), - MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), - MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), - MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), - MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), - MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), - MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), - MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), - MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), - MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), - MX31_PIN_TXD2 = IOMUX_PIN(28, 103), - MX31_PIN_RXD2 = IOMUX_PIN(27, 104), - MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), - MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), - MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), - MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), - MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), - MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), - MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), - MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), - MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), - MX31_PIN_CTS1 = IOMUX_PIN(39, 114), - MX31_PIN_RTS1 = IOMUX_PIN(38, 115), - MX31_PIN_TXD1 = IOMUX_PIN(37, 116), - MX31_PIN_RXD1 = IOMUX_PIN(36, 117), - MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), - MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), - MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), - MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), - MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), - MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), - MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), - MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), - MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), - MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), - MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), - MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), - MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), - MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), - MX31_PIN_SFS6 = IOMUX_PIN(26, 132), - MX31_PIN_SCK6 = IOMUX_PIN(25, 133), - MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), - MX31_PIN_STXD6 = IOMUX_PIN(23, 135), - MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), - MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), - MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), - MX31_PIN_STXD5 = IOMUX_PIN(21, 139), - MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), - MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), - MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), - MX31_PIN_STXD4 = IOMUX_PIN(19, 143), - MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), - MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), - MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), - MX31_PIN_STXD3 = IOMUX_PIN(17, 147), - MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), - MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), - MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), - MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), - MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), - MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), - MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), - MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), - MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), - MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), - MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), - MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), - MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), - MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), - MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), - MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), - MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), - MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), - MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), - MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), - MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), - MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), - MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), - MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), - MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), - MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), - MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), - MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), - MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), - MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), - MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), - MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), - MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), - MX31_PIN_D0 = IOMUX_PIN(0xff, 181), - MX31_PIN_D1 = IOMUX_PIN(0xff, 182), - MX31_PIN_D2 = IOMUX_PIN(0xff, 183), - MX31_PIN_D3 = IOMUX_PIN(0xff, 184), - MX31_PIN_D4 = IOMUX_PIN(0xff, 185), - MX31_PIN_D5 = IOMUX_PIN(0xff, 186), - MX31_PIN_D6 = IOMUX_PIN(0xff, 187), - MX31_PIN_D7 = IOMUX_PIN(0xff, 188), - MX31_PIN_D8 = IOMUX_PIN(0xff, 189), - MX31_PIN_D9 = IOMUX_PIN(0xff, 190), - MX31_PIN_D10 = IOMUX_PIN(0xff, 191), - MX31_PIN_D11 = IOMUX_PIN(0xff, 192), - MX31_PIN_D12 = IOMUX_PIN(0xff, 193), - MX31_PIN_D13 = IOMUX_PIN(0xff, 194), - MX31_PIN_D14 = IOMUX_PIN(0xff, 195), - MX31_PIN_D15 = IOMUX_PIN(0xff, 196), - MX31_PIN_NFRB = IOMUX_PIN(16, 197), - MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), - MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), - MX31_PIN_NFCLE = IOMUX_PIN(13, 200), - MX31_PIN_NFALE = IOMUX_PIN(12, 201), - MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), - MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), - MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), - MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), - MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), - MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), - MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), - MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), - MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), - MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), - MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), - MX31_PIN_CAS = IOMUX_PIN(0xff, 213), - MX31_PIN_RAS = IOMUX_PIN(0xff, 214), - MX31_PIN_RW = IOMUX_PIN(0xff, 215), - MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), - MX31_PIN_LBA = IOMUX_PIN(0xff, 217), - MX31_PIN_ECB = IOMUX_PIN(0xff, 218), - MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), - MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), - MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), - MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), - MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), - MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), - MX31_PIN_OE = IOMUX_PIN(0xff, 225), - MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), - MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), - MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), - MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), - MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), - MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), - MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), - MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), - MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), - MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), - MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), - MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), - MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), - MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), - MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), - MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), - MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), - MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), - MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), - MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), - MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), - MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), - MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), - MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), - MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), - MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), - MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), - MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), - MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), - MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), - MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), - MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), - MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), - MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), - MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), - MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), - MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), - MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), - MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), - MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), - MX31_PIN_A25 = IOMUX_PIN(0xff, 266), - MX31_PIN_A24 = IOMUX_PIN(0xff, 267), - MX31_PIN_A23 = IOMUX_PIN(0xff, 268), - MX31_PIN_A22 = IOMUX_PIN(0xff, 269), - MX31_PIN_A21 = IOMUX_PIN(0xff, 270), - MX31_PIN_A20 = IOMUX_PIN(0xff, 271), - MX31_PIN_A19 = IOMUX_PIN(0xff, 272), - MX31_PIN_A18 = IOMUX_PIN(0xff, 273), - MX31_PIN_A17 = IOMUX_PIN(0xff, 274), - MX31_PIN_A16 = IOMUX_PIN(0xff, 275), - MX31_PIN_A14 = IOMUX_PIN(0xff, 276), - MX31_PIN_A15 = IOMUX_PIN(0xff, 277), - MX31_PIN_A13 = IOMUX_PIN(0xff, 278), - MX31_PIN_A12 = IOMUX_PIN(0xff, 279), - MX31_PIN_A11 = IOMUX_PIN(0xff, 280), - MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), - MX31_PIN_A10 = IOMUX_PIN(0xff, 282), - MX31_PIN_A9 = IOMUX_PIN(0xff, 283), - MX31_PIN_A8 = IOMUX_PIN(0xff, 284), - MX31_PIN_A7 = IOMUX_PIN(0xff, 285), - MX31_PIN_A6 = IOMUX_PIN(0xff, 286), - MX31_PIN_A5 = IOMUX_PIN(0xff, 287), - MX31_PIN_A4 = IOMUX_PIN(0xff, 288), - MX31_PIN_A3 = IOMUX_PIN(0xff, 289), - MX31_PIN_A2 = IOMUX_PIN(0xff, 290), - MX31_PIN_A1 = IOMUX_PIN(0xff, 291), - MX31_PIN_A0 = IOMUX_PIN(0xff, 292), - MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), - MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), - MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), - MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), - MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), - MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), - MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), - MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), - MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), - MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), - MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), - MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), - MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), - MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), - MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), - MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), - MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), - MX31_PIN_SRX0 = IOMUX_PIN(34, 310), - MX31_PIN_STX0 = IOMUX_PIN(33, 311), - MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), - MX31_PIN_SRST0 = IOMUX_PIN(67, 313), - MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), - MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), - MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), - MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), - MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), - MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), - MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), - MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), - MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), - MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), - MX31_PIN_PWMO = IOMUX_PIN( 9, 324), - MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), - MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), - MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), -}; - -#define PIN_MAX 327 -#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */ - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MX31_PIN_(pin name)__(function) - */ -#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE) -#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2) -#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC) -#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) -#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) -#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC) -#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) -#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) -#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO) -#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO) -#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) -#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) -#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO) -#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO) -#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC) - - -/* - * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, - * cspi2_ss1, cspi1_ss0 cspi1_ss1 - */ - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins, u32); - -#endif /* ifndef __MACH_IOMUX_MX3_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h deleted file mode 100644 index 7fb5259b3ee0..000000000000 --- a/arch/arm/mach-imx/iomux-mx35.h +++ /dev/null @@ -1,1254 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> - */ - -#ifndef __MACH_IOMUX_MX35_H__ -#define __MACH_IOMUX_MX35_H__ - -#include "iomux-v3.h" - -/* - * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named - * GPIO_<unit>_<num> see also iomux-v3.h - */ - -/* PAD MUX ALT INPSE PATH */ -#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL) -#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL) -#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL) - -#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL) -#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL) - -#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL) -#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL) - -#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL) - -#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL) -#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL) - -#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL) -#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL) -#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL) - -#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL) - -#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL) -#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL) -#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL) -#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL) -#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL) -#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL) -#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL) - -#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL) -#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL) -#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL) -#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL) -#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL) -#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL) -#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL) -#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL) -#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL) -#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL) -#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL) -#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL) -#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL) -#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL) -#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL) -#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL) -#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL) -#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL) - -#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL) -#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL) -#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL) - -#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL) -#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL) - -#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL) -#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL) -#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL) - -#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL) -#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL) -#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL) - -#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL) -#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL) -#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL) - -#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL) -#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL) -#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL) -#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL) - -#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL) -#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL) -#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL) -#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL) -#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL) -#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL) -#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL) -#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL) -#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL) -#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL) -#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL) -#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL) -#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL) -#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL) -#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL) - -#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL) -#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL) -#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL) -#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL) -#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL) - -#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL) -#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL) -#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL) -#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL) -#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL) -#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL) -#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL) -#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL) -#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL) -#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL) -#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL) -#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL) -#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL) -#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL) -#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL) -#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL) -#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL) -#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL) -#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL) -#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL) -#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL) -#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL) -#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL) -#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL) -#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL) -#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL) -#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL) -#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL) -#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL) -#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL) -#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL) -#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL) -#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL) -#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL) - -#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL) -#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL) - -#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL) - -#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL) - -#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL) -#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL) - -#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL) -#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL) -#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL) - -#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL) - -#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL) -#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL) - - -#endif /* __MACH_IOMUX_MX35_H__ */ diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c deleted file mode 100644 index a4bec3b9b2b3..000000000000 --- a/arch/arm/mach-imx/iomux-v1.c +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/plat-mxc/iomux-v1.c - * - * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH - * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix - * - * Common code for i.MX1, i.MX21 and i.MX27 - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <asm/mach/map.h> - -#include "hardware.h" -#include "iomux-v1.h" - -static void __iomem *imx_iomuxv1_baseaddr; -static unsigned imx_iomuxv1_numports; - -static inline unsigned long imx_iomuxv1_readl(unsigned offset) -{ - return imx_readl(imx_iomuxv1_baseaddr + offset); -} - -static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) -{ - imx_writel(val, imx_iomuxv1_baseaddr + offset); -} - -static inline void imx_iomuxv1_rmwl(unsigned offset, - unsigned long mask, unsigned long value) -{ - unsigned long reg = imx_iomuxv1_readl(offset); - - reg &= ~mask; - reg |= value; - - imx_iomuxv1_writel(reg, offset); -} - -static inline void imx_iomuxv1_set_puen( - unsigned int port, unsigned int pin, int on) -{ - unsigned long mask = 1 << pin; - - imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); -} - -static inline void imx_iomuxv1_set_ddir( - unsigned int port, unsigned int pin, int out) -{ - unsigned long mask = 1 << pin; - - imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); -} - -static inline void imx_iomuxv1_set_gpr( - unsigned int port, unsigned int pin, int af) -{ - unsigned long mask = 1 << pin; - - imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); -} - -static inline void imx_iomuxv1_set_gius( - unsigned int port, unsigned int pin, int inuse) -{ - unsigned long mask = 1 << pin; - - imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); -} - -static inline void imx_iomuxv1_set_ocr( - unsigned int port, unsigned int pin, unsigned int ocr) -{ - unsigned long shift = (pin & 0xf) << 1; - unsigned long mask = 3 << shift; - unsigned long value = ocr << shift; - unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); - - imx_iomuxv1_rmwl(offset, mask, value); -} - -static inline void imx_iomuxv1_set_iconfa( - unsigned int port, unsigned int pin, unsigned int aout) -{ - unsigned long shift = (pin & 0xf) << 1; - unsigned long mask = 3 << shift; - unsigned long value = aout << shift; - unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); - - imx_iomuxv1_rmwl(offset, mask, value); -} - -static inline void imx_iomuxv1_set_iconfb( - unsigned int port, unsigned int pin, unsigned int bout) -{ - unsigned long shift = (pin & 0xf) << 1; - unsigned long mask = 3 << shift; - unsigned long value = bout << shift; - unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); - - imx_iomuxv1_rmwl(offset, mask, value); -} - -int mxc_gpio_mode(int gpio_mode) -{ - unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; - unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; - unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; - - if (port >= imx_iomuxv1_numports) - return -EINVAL; - - /* Pullup enable */ - imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); - - /* Data direction */ - imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); - - /* Primary / alternate function */ - imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); - - /* use as gpio? */ - imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); - - imx_iomuxv1_set_ocr(port, pin, ocr); - - imx_iomuxv1_set_iconfa(port, pin, aout); - - imx_iomuxv1_set_iconfb(port, pin, bout); - - return 0; -} - -static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) -{ - size_t i; - int ret = 0; - - for (i = 0; i < count; ++i) { - ret = mxc_gpio_mode(list[i]); - - if (ret) - return ret; - } - - return ret; -} - -int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label) -{ - int ret; - - ret = imx_iomuxv1_setup_multiple(pin_list, count); - return ret; -} - -int __init imx_iomuxv1_init(void __iomem *base, int numports) -{ - imx_iomuxv1_baseaddr = base; - imx_iomuxv1_numports = numports; - - return 0; -} diff --git a/arch/arm/mach-imx/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h deleted file mode 100644 index b94852970c7f..000000000000 --- a/arch/arm/mach-imx/iomux-v1.h +++ /dev/null @@ -1,81 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - */ -#ifndef __MACH_IOMUX_V1_H__ -#define __MACH_IOMUX_V1_H__ - -/* -* GPIO Module and I/O Multiplexer -* x = 0..3 for reg_A, reg_B, reg_C, reg_D -*/ -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#define MX1_NUM_GPIO_PORT 4 -#define MX21_NUM_GPIO_PORT 6 -#define MX27_NUM_GPIO_PORT 6 - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) - -extern int mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - const char *label); - -extern int imx_iomuxv1_init(void __iomem *base, int numports); - -#endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c deleted file mode 100644 index 043cf3c7cacf..000000000000 --- a/arch/arm/mach-imx/iomux-v3.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, - * <armlinux@phytec.de> - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/gpio.h> - -#include <asm/mach/map.h> - -#include "hardware.h" -#include "iomux-v3.h" - -static void __iomem *base; - -/* - * configures a single pad in the iomuxer - */ -int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) -{ - u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT; - u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT; - u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT; - u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT; - u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; - u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; - - if (mux_ctrl_ofs) - imx_writel(mux_mode, base + mux_ctrl_ofs); - - if (sel_input_ofs) - imx_writel(sel_input, base + sel_input_ofs); - - if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) - imx_writel(pad_ctrl, base + pad_ctrl_ofs); - - return 0; -} - -int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, - unsigned count) -{ - const iomux_v3_cfg_t *p = pad_list; - int i; - int ret; - - for (i = 0; i < count; i++) { - ret = mxc_iomux_v3_setup_pad(*p); - if (ret) - return ret; - p++; - } - return 0; -} - -void mxc_iomux_v3_init(void __iomem *iomux_v3_base) -{ - base = iomux_v3_base; -} diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h deleted file mode 100644 index 7db8ec926ff1..000000000000 --- a/arch/arm/mach-imx/iomux-v3.h +++ /dev/null @@ -1,130 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, - * <armlinux@phytec.de> - */ - -#ifndef __MACH_IOMUX_V3_H__ -#define __MACH_IOMUX_V3_H__ - -/* - * build IOMUX_PAD structure - * - * This iomux scheme is based around pads, which are the physical balls - * on the processor. - * - * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls - * things like driving strength and pullup/pulldown. - * - Each pad can have but not necessarily does have an output routing register - * (IOMUXC_SW_MUX_CTL_PAD_x). - * - Each pad can have but not necessarily does have an input routing register - * (IOMUXC_x_SELECT_INPUT) - * - * The three register sets do not have a fixed offset to each other, - * hence we order this table by pad control registers (which all pads - * have) and put the optional i/o routing registers into additional - * fields. - * - * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named - * GPIO_<unit>_<num> - * - * IOMUX/PAD Bit field definitions - * - * MUX_CTRL_OFS: 0..11 (12) - * PAD_CTRL_OFS: 12..23 (12) - * SEL_INPUT_OFS: 24..35 (12) - * MUX_MODE + SION: 36..40 (5) - * PAD_CTRL + NO_PAD_CTRL: 41..57 (17) - * SEL_INP: 58..61 (4) - * reserved: 63 (1) -*/ - -typedef u64 iomux_v3_cfg_t; - -#define MUX_CTRL_OFS_SHIFT 0 -#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) -#define MUX_PAD_CTRL_OFS_SHIFT 12 -#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT) -#define MUX_SEL_INPUT_OFS_SHIFT 24 -#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT) - -#define MUX_MODE_SHIFT 36 -#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) -#define MUX_PAD_CTRL_SHIFT 41 -#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) -#define MUX_SEL_INPUT_SHIFT 58 -#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) - -#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) - -#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \ - _sel_input, _pad_ctrl) \ - (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ - ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \ - ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ - ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ - ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \ - ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT)) - -#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad)) -/* - * Use to set PAD control - */ - -#define NO_PAD_CTRL (1 << 16) -#define PAD_CTL_DVS (1 << 13) -#define PAD_CTL_HYS (1 << 8) - -#define PAD_CTL_PKE (1 << 7) -#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) -#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) - -#define PAD_CTL_ODE (1 << 3) - -#define PAD_CTL_DSE_LOW (0 << 1) -#define PAD_CTL_DSE_MED (1 << 1) -#define PAD_CTL_DSE_HIGH (2 << 1) -#define PAD_CTL_DSE_MAX (3 << 1) - -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define IOMUX_CONFIG_SION (0x1 << 4) - -#define MX51_NUM_GPIO_PORT 4 - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -/* - * setups a single pad in the iomuxer - */ -int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); - -/* - * setups multiple pads - * convenient way to call the above function with tables - */ -int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, - unsigned count); - -/* - * Initialise the iomux controller - */ -void mxc_iomux_v3_init(void __iomem *iomux_v3_base); - -#endif /* __MACH_IOMUX_V3_H__*/ - diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c deleted file mode 100644 index 4d9a56fb6989..000000000000 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ /dev/null @@ -1,562 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * armadillo5x0.c - * - * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * updates in http://alberdroid.blogspot.com/ - * - * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 - * Based on mx31ads.c and pcm037.c Great Work! - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/delay.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx31.h" -#include "crmregs-imx3.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static int armadillo5x0_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* UART2 */ - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - /* LAN9118_IRQ */ - IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ - /* I2C2 */ - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, - /* OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /* USB host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), -}; - -/* USB */ - -#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) -#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) -#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbotg_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - /* Chip already enabled by hardware */ - /* OTG phy reset*/ - err = gpio_request(OTG_RESET, "USB-OTG-RESET"); - if (err) { - pr_err("Failed to request the usb otg reset gpio\n"); - return err; - } - - err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); - if (err) { - pr_err("Failed to reset the usb otg phy\n"); - goto otg_free_reset; - } - - gpio_set_value(OTG_RESET, 0/*LOW*/); - mdelay(5); - gpio_set_value(OTG_RESET, 1/*HIGH*/); - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_DIFF_UNI); - -otg_free_reset: - gpio_free(OTG_RESET); - return err; -} - -static int usbh2_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - - /* Enable the chip */ - err = gpio_request(USBH2_CS, "USB-H2-CS"); - if (err) { - pr_err("Failed to request the usb host 2 CS gpio\n"); - return err; - } - - err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); - if (err) { - pr_err("Failed to drive the usb host 2 CS gpio\n"); - goto h2_free_cs; - } - - /* H2 phy reset*/ - err = gpio_request(USBH2_RESET, "USB-H2-RESET"); - if (err) { - pr_err("Failed to request the usb host 2 reset gpio\n"); - goto h2_free_cs; - } - - err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); - if (err) { - pr_err("Failed to reset the usb host 2 phy\n"); - goto h2_free_reset; - } - - gpio_set_value(USBH2_RESET, 0/*LOW*/); - mdelay(5); - gpio_set_value(USBH2_RESET, 1/*HIGH*/); - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_DIFF_UNI); - -h2_free_reset: - gpio_free(USBH2_RESET); -h2_free_cs: - gpio_free(USBH2_CS); - return err; -} - -static struct mxc_usbh_platform_data usbotg_pdata __initdata = { - .init = usbotg_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -/* RTC over I2C*/ -#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) - -static struct i2c_board_info armadillo5x0_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), -}; - -/* GPIO BUTTONS */ -static struct gpio_keys_button armadillo5x0_buttons[] = { - { - .code = KEY_ENTER, /*28*/ - .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0), - .active_low = 1, - .desc = "menu", - .wakeup = 1, - }, { - .code = KEY_BACK, /*158*/ - .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0), - .active_low = 1, - .desc = "back", - .wakeup = 1, - } -}; - -static const struct gpio_keys_platform_data - armadillo5x0_button_data __initconst = { - .buttons = armadillo5x0_buttons, - .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), -}; - -/* - * NAND Flash - */ -static const struct mxc_nand_platform_data -armadillo5x0_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -/* - * MTD NOR Flash - */ -static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { - { - .name = "nor.bootloader", - .offset = 0x00000000, - .size = 4*32*1024, - }, { - .name = "nor.kernel", - .offset = MTDPART_OFS_APPEND, - .size = 16*128*1024, - }, { - .name = "nor.userland", - .offset = MTDPART_OFS_APPEND, - .size = 110*128*1024, - }, { - .name = "nor.config", - .offset = MTDPART_OFS_APPEND, - .size = 1*128*1024, - }, -}; - -static const struct physmap_flash_data - armadillo5x0_nor_flash_pdata __initconst = { - .width = 2, - .parts = armadillo5x0_nor_flash_partitions, - .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), -}; - -static const struct resource armadillo5x0_nor_flash_resource __initconst = { - .flags = IORESOURCE_MEM, - .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, -}; - -/* - * FB support - */ -static const struct fb_videomode fb_modedb[] = { - { /* 640x480 @ 60 Hz */ - .name = "CRT-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 35, - .right_margin = 115, - .upper_margin = 43, - .lower_margin = 1, - .hsync_len = 10, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, {/* 800x600 @ 56 Hz */ - .name = "CRT-SVGA", - .refresh = 56, - .xres = 800, - .yres = 600, - .pixclock = 30000, - .left_margin = 30, - .right_margin = 108, - .upper_margin = 13, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "CRT-VGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -/* - * SDHC 1 - * MMC support - */ -static int armadillo5x0_sdhc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); -} - -static int armadillo5x0_sdhc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - int gpio_det, gpio_wp; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); - - ret = gpio_request(gpio_det, "sdhc-card-detect"); - if (ret) - return ret; - - gpio_direction_input(gpio_det); - - ret = gpio_request(gpio_wp, "sdhc-write-protect"); - if (ret) - goto err_gpio_free; - - gpio_direction_input(gpio_wp); - - /* When supported the trigger type have to be BOTH */ - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), - detect_irq, IRQF_TRIGGER_FALLING, - "sdhc-detect", data); - - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(gpio_wp); - -err_gpio_free: - gpio_free(gpio_det); - - return ret; - -} - -static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); - gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); - gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .get_ro = armadillo5x0_sdhc1_get_ro, - .init = armadillo5x0_sdhc1_init, - .exit = armadillo5x0_sdhc1_exit, -}; - -/* - * SMSC 9118 - * Network support - */ -static struct resource armadillo5x0_smc911x_resources[] = { - { - .start = MX31_CS3_BASE_ADDR, - .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_16BIT, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device armadillo5x0_smc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), - .resource = armadillo5x0_smc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -/* UART device data */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &armadillo5x0_smc911x_device, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -/* - * Perform board specific initializations - */ -static void __init armadillo5x0_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(armadillo5x0_pins, - ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - imx31_add_imx_i2c1(NULL); - - /* Register UART */ - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - - /* Register FB */ - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); - - /* Register NOR Flash */ - platform_device_register_resndata(NULL, "physmap-flash", -1, - &armadillo5x0_nor_flash_resource, 1, - &armadillo5x0_nor_flash_pdata, - sizeof(armadillo5x0_nor_flash_pdata)); - - /* Register NAND Flash */ - imx31_add_mxc_nand(&armadillo5x0_nand_board_info); - - /* set NAND page size to 2k if not configured via boot mode pins */ - imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), - mx3_ccm_base + MXC_CCM_RCSR); -} - -static void __init armadillo5x0_late(void) -{ - armadillo5x0_smc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - armadillo5x0_smc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx_add_gpio_keys(&armadillo5x0_button_data); - - /* SMSC9118 IRQ pin */ - gpio_direction_input(MX31_PIN_GPIO1_0); - - /* Register SDHC */ - imx31_add_mxc_mmc(0, &sdhc_pdata); - - /* RTC */ - /* Get RTC IRQ and register the chip */ - if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) { - if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO)) - armadillo5x0_i2c_rtc.irq = - gpio_to_irq(ARMADILLO5X0_RTC_GPIO); - else - gpio_free(ARMADILLO5X0_RTC_GPIO); - } - - if (armadillo5x0_i2c_rtc.irq == 0) - pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); - i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); - - /* USB */ - usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbotg_pdata.otg) - imx31_add_mxc_ehci_otg(&usbotg_pdata); - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -} - -static void __init armadillo5x0_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(ARMADILLO5X0, "Armadillo-500") - /* Maintainer: Alberto Panizzo */ - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = armadillo5x0_timer_init, - .init_machine = armadillo5x0_init, - .init_late = armadillo5x0_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c deleted file mode 100644 index 3929208600f2..000000000000 --- a/arch/arm/mach-imx/mach-bug.c +++ /dev/null @@ -1,54 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const unsigned int bug_pins[] __initconst = { - MX31_PIN_PC_RST__CTS5, - MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, - MX31_PIN_PC_BVD1__RXD5, -}; - -static void __init bug_board_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(bug_pins, - ARRAY_SIZE(bug_pins), "uart-4"); - imx31_add_imx_uart4(&uart_pdata); -} - -static void __init bug_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(BUG, "BugLabs BUGBase") - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = bug_timer_init, - .init_machine = bug_board_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c new file mode 100644 index 000000000000..262422a9c196 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 Sascha Hauer, Pengutronix + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/mm.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include "common.h" +#include "hardware.h" +#include "mx27.h" + +/* MX27 memory map definition */ +static struct map_desc imx27_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + imx_map_entry(MX27, AIPI, MT_DEVICE), + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + imx_map_entry(MX27, SAHB1, MT_DEVICE), + /* + * this fixed mapping covers: + * - EMI + */ + imx_map_entry(MX27, X_MEMC, MT_DEVICE), +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +static void __init mx27_map_io(void) +{ + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); +} + +static void __init imx27_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX27); +} + +static void __init mx27_init_irq(void) +{ + void __iomem *avic_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); +} + +static const char * const imx27_dt_board_compat[] __initconst = { + "fsl,imx27", + NULL +}; + +DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_late = imx27_pm_init, + .dt_compat = imx27_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c deleted file mode 100644 index 3da4c0920198..000000000000 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ /dev/null @@ -1,562 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * mach-imx27_visstrim_m10.c - * - * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> - * - * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/leds.h> -#include <linux/platform_data/asoc-mx27vis.h> -#include <sound/tlv320aic32x4.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/system_info.h> -#include <asm/memblock.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" - -#define TVP5150_RSTN (GPIO_PORTC + 18) -#define TVP5150_PWDN (GPIO_PORTC + 19) -#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) -#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) - -#define VERSION_MASK 0x7 -#define MOTHERBOARD_SHIFT 4 -#define EXPBOARD_SHIFT 0 - -#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) -#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) -#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) - -#define EXPBOARD_BIT2 (GPIO_PORTD + 25) -#define EXPBOARD_BIT1 (GPIO_PORTD + 27) -#define EXPBOARD_BIT0 (GPIO_PORTD + 28) - -#define AMP_GAIN_0 (GPIO_PORTF + 9) -#define AMP_GAIN_1 (GPIO_PORTF + 8) -#define AMP_MUTE_SDL (GPIO_PORTE + 5) -#define AMP_MUTE_SDR (GPIO_PORTF + 7) - -static const int visstrim_m10_pins[] __initconst = { - /* UART1 (console) */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* SDHC1 */ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* Both I2Cs */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* USB OTG */ - OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, - PC9_PF_USBOTG_DATA0, - PC11_PF_USBOTG_DATA1, - PC10_PF_USBOTG_DATA2, - PC13_PF_USBOTG_DATA3, - PC12_PF_USBOTG_DATA4, - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PE25_PF_USBOTG_DATA7, - PE24_PF_USBOTG_CLK, - PE2_PF_USBOTG_DIR, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PB23_PF_USB_PWR, - PB24_PF_USB_OC, - /* CSI */ - TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, - TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, - /* mother board version */ - MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - /* expansion board version */ - EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, - /* Audio AMP control */ - AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, - AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, - AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, - AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, -}; - -static struct gpio visstrim_m10_version_gpios[] = { - { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" }, - { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" }, - { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" }, - { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" }, - { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" }, - { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, -}; - -static const struct gpio visstrim_m10_gpios[] __initconst = { - { - .gpio = TVP5150_RSTN, - .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, - .label = "tvp5150_rstn", - }, - { - .gpio = TVP5150_PWDN, - .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, - .label = "tvp5150_pwdn", - }, - { - .gpio = OTG_PHY_CS_GPIO, - .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, - .label = "usbotg_cs", - }, - { - .gpio = AMP_GAIN_0, - .flags = GPIOF_DIR_OUT, - .label = "amp-gain-0", - }, - { - .gpio = AMP_GAIN_1, - .flags = GPIOF_DIR_OUT, - .label = "amp-gain-1", - }, - { - .gpio = AMP_MUTE_SDL, - .flags = GPIOF_DIR_OUT, - .label = "amp-mute-sdl", - }, - { - .gpio = AMP_MUTE_SDR, - .flags = GPIOF_DIR_OUT, - .label = "amp-mute-sdr", - }, -}; - -/* Camera */ -static struct mx2_camera_platform_data visstrim_camera = { - .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | - MX2_CAMERA_PCLK_SAMPLE_RISING, - .clk = 100000, -}; - -static phys_addr_t mx2_camera_base __initdata; -#define MX2_CAMERA_BUF_SIZE SZ_8M - -static void __init visstrim_analog_camera_init(void) -{ - struct platform_device *pdev; - - gpio_set_value(TVP5150_PWDN, 1); - ndelay(1); - gpio_set_value(TVP5150_RSTN, 0); - ndelay(500); - gpio_set_value(TVP5150_RSTN, 1); - ndelay(200000); - - pdev = imx27_add_mx2_camera(&visstrim_camera); - if (IS_ERR(pdev)) - return; - - dma_declare_coherent_memory(&pdev->dev, mx2_camera_base, - mx2_camera_base, MX2_CAMERA_BUF_SIZE); -} - -static void __init visstrim_reserve(void) -{ - /* reserve 4 MiB for mx2-camera */ - mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE); -} - -/* GPIOs used as events for applications */ -static struct gpio_keys_button visstrim_gpio_keys[] = { - { - .type = EV_KEY, - .code = KEY_RESTART, - .gpio = (GPIO_PORTC + 15), - .desc = "Default config", - .active_low = 0, - .wakeup = 1, - }, - { - .type = EV_KEY, - .code = KEY_RECORD, - .gpio = (GPIO_PORTF + 14), - .desc = "Record", - .active_low = 0, - .wakeup = 1, - }, - { - .type = EV_KEY, - .code = KEY_STOP, - .gpio = (GPIO_PORTF + 13), - .desc = "Stop", - .active_low = 0, - .wakeup = 1, - } -}; - -static const struct gpio_keys_platform_data - visstrim_gpio_keys_platform_data __initconst = { - .buttons = visstrim_gpio_keys, - .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), -}; - -/* led */ -static const struct gpio_led visstrim_m10_leds[] __initconst = { - { - .name = "visstrim:ld0", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 29), - }, - { - .name = "visstrim:ld1", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 24), - }, - { - .name = "visstrim:ld2", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 28), - }, - { - .name = "visstrim:ld3", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 25), - }, -}; - -static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { - .leds = visstrim_m10_leds, - .num_leds = ARRAY_SIZE(visstrim_m10_leds), -}; - -/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ -static int visstrim_m10_sdhc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - - ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); - return ret; -} - -static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); -} - -static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { - .init = visstrim_m10_sdhc1_init, - .exit = visstrim_m10_sdhc1_exit, -}; - -/* Visstrim_SM10 NOR flash */ -static struct physmap_flash_data visstrim_m10_flash_data = { - .width = 2, -}; - -static struct resource visstrim_m10_flash_resource = { - .start = 0xc0000000, - .end = 0xc0000000 + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device visstrim_m10_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &visstrim_m10_flash_data, - }, - .num_resources = 1, - .resource = &visstrim_m10_flash_resource, -}; - -static struct platform_device *platform_devices[] __initdata = { - &visstrim_m10_nor_mtd_device, -}; - -/* Visstrim_M10 uses UART0 as console */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* I2C */ -static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { - .gpio_base = 240, /* After MX27 internal GPIOs */ - .invert = 0, -}; - -static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { - .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | - AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | - AIC32X4_PWR_AIC32X4_LDO_ENABLE | - AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | - AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, - .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | - AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, - .swapdacs = false, -}; - -static struct i2c_board_info visstrim_m10_i2c_devices[] = { - { - I2C_BOARD_INFO("pca9555", 0x20), - .platform_data = &visstrim_m10_pca9555_pdata, - }, - { - I2C_BOARD_INFO("tlv320aic32x4", 0x18), - .platform_data = &visstrim_m10_aic32x4_pdata, - }, - { - I2C_BOARD_INFO("m41t00", 0x68), - } -}; - -/* USB OTG */ -static int otg_phy_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static const struct mxc_usbh_platform_data -visstrim_m10_usbotg_pdata __initconst = { - .init = otg_phy_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -/* SSI */ -static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { - .flags = IMX_SSI_DMA | IMX_SSI_SYN, -}; - -/* coda */ - -static void __init visstrim_coda_init(void) -{ - struct platform_device *pdev; - - pdev = imx27_add_coda(); - dma_declare_coherent_memory(&pdev->dev, - mx2_camera_base + MX2_CAMERA_BUF_SIZE, - mx2_camera_base + MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE); -} - -/* DMA deinterlace */ -static struct platform_device visstrim_deinterlace = { - .name = "m2m-deinterlace", - .id = 0, -}; - -static void __init visstrim_deinterlace_init(void) -{ - int ret = -ENOMEM; - struct platform_device *pdev = &visstrim_deinterlace; - - ret = platform_device_register(pdev); - - dma_declare_coherent_memory(&pdev->dev, - mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, - mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE); -} - -/* Emma-PrP for format conversion */ -static void __init visstrim_emmaprp_init(void) -{ - struct platform_device *pdev; - int ret; - - pdev = imx27_add_mx2_emmaprp(); - if (IS_ERR(pdev)) - return; - - /* - * Use the same memory area as the analog camera since both - * devices are, by nature, exclusive. - */ - ret = dma_declare_coherent_memory(&pdev->dev, - mx2_camera_base, mx2_camera_base, - MX2_CAMERA_BUF_SIZE); - if (ret) - pr_err("Failed to declare memory for emmaprp\n"); -} - -/* Audio */ -static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { - .amp_gain0_gpio = AMP_GAIN_0, - .amp_gain1_gpio = AMP_GAIN_1, - .amp_mutel_gpio = AMP_MUTE_SDL, - .amp_muter_gpio = AMP_MUTE_SDR, -}; - -static void __init visstrim_m10_revision(void) -{ - int exp_version = 0; - int mo_version = 0; - int ret; - - ret = gpio_request_array(visstrim_m10_version_gpios, - ARRAY_SIZE(visstrim_m10_version_gpios)); - if (ret) { - pr_err("Failed to request version gpios"); - return; - } - - /* Get expansion board version (negative logic) */ - exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2; - exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1; - exp_version |= !gpio_get_value(EXPBOARD_BIT0); - - /* Get mother board version (negative logic) */ - mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2; - mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1; - mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); - - system_rev = 0x27000; - system_rev |= (mo_version << MOTHERBOARD_SHIFT); - system_rev |= (exp_version << EXPBOARD_SHIFT); -} - -static void __init visstrim_m10_board_init(void) -{ - int ret; - - imx27_soc_init(); - visstrim_m10_revision(); - - ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, - ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); - if (ret) - pr_err("Failed to setup pins (%d)\n", ret); - - imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); - imx27_add_imx_uart0(&uart_pdata); - - imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); - imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); - i2c_register_board_info(0, visstrim_m10_i2c_devices, - ARRAY_SIZE(visstrim_m10_i2c_devices)); - - imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); - imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); - imx27_add_fec(NULL); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); -} - -static void __init visstrim_m10_late_init(void) -{ - int mo_version, ret; - - ret = gpio_request_array(visstrim_m10_gpios, - ARRAY_SIZE(visstrim_m10_gpios)); - if (ret) - pr_err("Failed to request gpios (%d)\n", ret); - - imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); - - imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, - sizeof(snd_mx27vis_pdata)); - - gpio_led_register_device(0, &visstrim_m10_led_data); - - /* Use mother board version to decide what video devices we shall use */ - mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; - if (mo_version & 0x1) { - visstrim_emmaprp_init(); - - /* - * Despite not being used, tvp5150 must be - * powered on to avoid I2C problems. To minimize - * power consupmtion keep reset enabled. - */ - gpio_set_value(TVP5150_PWDN, 1); - ndelay(1); - gpio_set_value(TVP5150_RSTN, 0); - } else { - visstrim_deinterlace_init(); - visstrim_analog_camera_init(); - } - - visstrim_coda_init(); -} - -static void __init visstrim_m10_timer_init(void) -{ - mx27_clocks_init((unsigned long)25000000); -} - -MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .atag_offset = 0x100, - .reserve = visstrim_reserve, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = visstrim_m10_timer_init, - .init_machine = visstrim_m10_board_init, - .init_late = visstrim_m10_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/mach-imx31.c index dc69dfe600df..dc69dfe600df 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/mach-imx31.c diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/mach-imx35.c index ec5c3068715c..ec5c3068715c 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/mach-imx35.c diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c index 128cf4c92aab..445256e6a4a0 100644 --- a/arch/arm/mach-imx/mach-imx7ulp.c +++ b/arch/arm/mach-imx/mach-imx7ulp.c @@ -67,6 +67,9 @@ static const char *const imx7ulp_dt_compat[] __initconst = { static void __init imx7ulp_init_late(void) { + if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT)) + platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0); + imx7ulp_cpuidle_init(); } diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c deleted file mode 100644 index 63f7f78a77af..000000000000 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ /dev/null @@ -1,291 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * KZM-ARM11-01 support - * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> - * - * based on code for MX31ADS, - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/smsc911x.h> -#include <linux/types.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/memory.h> -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ - IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ - IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \ - MX31_IO_ADDRESS(x)) - -/* - * KZM-ARM11-01 Board Control Registers on FPGA - */ -#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) - -/* - * External UART for touch panel on FPGA - */ -#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) - -#if IS_ENABLED(CONFIG_SERIAL_8250) -/* - * KZM-ARM11-01 has an external UART on FPGA - */ -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), - .mapbase = KZM_ARM11_16550, - /* irq number is run-time assigned */ - .irqflags = IRQ_TYPE_EDGE_RISING, - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_BUGGY_UART, - }, - {}, -}; - -static struct resource serial8250_resources[] = { - { - .start = KZM_ARM11_16550, - .end = KZM_ARM11_16550 + 0x10, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, - .num_resources = ARRAY_SIZE(serial8250_resources), - .resource = serial8250_resources, -}; - -static int __init kzm_init_ext_uart(void) -{ - u8 tmp; - - /* - * GPIO 1-1: external UART interrupt line - */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - - /* - * Unmask UART interrupt - */ - tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); - tmp |= 0x2; - __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); - - serial_platform_data[0].irq = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - serial8250_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - serial8250_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - - return platform_device_register(&serial_device); -} -#else -static inline int kzm_init_ext_uart(void) -{ - return 0; -} -#endif - -/* - * SMSC LAN9118 - */ -#if IS_ENABLED(CONFIG_SMSC911X) -static struct smsc911x_platform_config kzm_smsc9118_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct resource kzm_smsc9118_resources[] = { - { - .start = MX31_CS5_BASE_ADDR, - .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device kzm_smsc9118_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), - .resource = kzm_smsc9118_resources, - .dev = { - .platform_data = &kzm_smsc9118_config, - }, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -static int __init kzm_init_smsc9118(void) -{ - /* - * GPIO 1-2: SMSC9118 interrupt line - */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - kzm_smsc9118_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); - kzm_smsc9118_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); - - return platform_device_register(&kzm_smsc9118_device); -} -#else -static inline int kzm_init_smsc9118(void) -{ - return 0; -} -#endif - -#if IS_ENABLED(CONFIG_SERIAL_IMX) -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static void __init kzm_init_imx_uart(void) -{ - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); -} -#else -static inline void kzm_init_imx_uart(void) -{ -} -#endif - -static int kzm_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_DCD_DCE1__DCD_DCE1, - MX31_PIN_RI_DCE1__RI_DCE1, - MX31_PIN_DSR_DCE1__DSR_DCE1, - MX31_PIN_DTR_DCE1__DTR_DCE1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_DCD_DTE1__DCD_DTE2, - MX31_PIN_RI_DTE1__RI_DTE2, - MX31_PIN_DSR_DTE1__DSR_DTE2, - MX31_PIN_DTR_DTE1__DTR_DTE2, -}; - -/* - * Board specific initialization. - */ -static void __init kzm_board_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(kzm_pins, - ARRAY_SIZE(kzm_pins), "kzm"); - kzm_init_imx_uart(); - - pr_info("Clock input source is 26MHz\n"); -} - -static void __init kzm_late_init(void) -{ - kzm_init_ext_uart(); - kzm_init_smsc9118(); -} - -/* - * This structure defines static mappings for the kzm-arm11-01 board. - */ -static struct map_desc kzm_io_desc[] __initdata = { - { - .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE, - .type = MT_DEVICE - }, - { - .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), - .length = MX31_CS5_SIZE, - .type = MT_DEVICE - }, -}; - -/* - * Set up static virtual mappings. - */ -static void __init kzm_map_io(void) -{ - mx31_map_io(); - iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); -} - -static void __init kzm_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .atag_offset = 0x100, - .map_io = kzm_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = kzm_timer_init, - .init_machine = kzm_board_init, - .init_late = kzm_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c deleted file mode 100644 index ec011e89eb9e..000000000000 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ /dev/null @@ -1,338 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/physmap.h> -#include <linux/gpio/driver.h> -#include <linux/gpio/machine.h> -#include <linux/gpio.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx21.h" -#include "hardware.h" -#include "iomux-mx21.h" - -#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) -#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) -#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) -#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) - -#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) -#define MX21ADS_MMGPIO_BASE (6 * 32) - -/* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) -#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) -#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) -#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) -#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) -#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) -#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) -#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) -#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) -#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) -#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) -#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) -#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) -#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) -#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) -#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) -#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) -#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) - -static const int mx21ads_pins[] __initconst = { - - /* CS8900A */ - (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), - - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - - /* UART3 (IrDA) - only TXD and RXD */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - - /* UART4 */ - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, - - /* LCDC */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA24_PF_REV, /* Sharp panel dedicated signal */ - PA25_PF_CLS, /* Sharp panel dedicated signal */ - PA26_PF_PS, /* Sharp panel dedicated signal */ - PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */ - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - - /* MMC/SDHC */ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - - /* NFC */ - PF0_PF_NRFB, - PF1_PF_NFCE, - PF2_PF_NFWP, - PF3_PF_NFCLE, - PF4_PF_NFALE, - PF5_PF_NFRE, - PF6_PF_NFWE, - PF7_PF_NFIO0, - PF8_PF_NFIO1, - PF9_PF_NFIO2, - PF10_PF_NFIO3, - PF11_PF_NFIO4, - PF12_PF_NFIO5, - PF13_PF_NFIO6, - PF14_PF_NFIO7, -}; - -/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */ -static struct physmap_flash_data mx21ads_flash_data = { - .width = 4, -}; - -static struct resource mx21ads_flash_resource = - DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M); - -static struct platform_device mx21ads_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx21ads_flash_data, - }, - .num_resources = 1, - .resource = &mx21ads_flash_resource, -}; - -static struct resource mx21ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K), - /* irq number is run-time assigned */ - DEFINE_RES_IRQ(-1), -}; - -static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { - .name = "cs89x0", - .id = 0, - .res = mx21ads_cs8900_resources, - .num_res = ARRAY_SIZE(mx21ads_cs8900_resources), -}; - -static const struct imxuart_platform_data uart_pdata_rts __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxuart_platform_data uart_pdata_norts __initconst = { -}; - -static struct resource mx21ads_mmgpio_resource = - DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); - -static struct bgpio_pdata mx21ads_mmgpio_pdata = { - .label = "mx21ads-mmgpio", - .base = MX21ADS_MMGPIO_BASE, - .ngpio = 16, -}; - -static struct platform_device mx21ads_mmgpio = { - .name = "basic-mmio-gpio", - .id = PLATFORM_DEVID_AUTO, - .resource = &mx21ads_mmgpio_resource, - .num_resources = 1, - .dev = { - .platform_data = &mx21ads_mmgpio_pdata, - }, -}; - -static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer = - REGULATOR_SUPPLY("lcd", "imx-fb.0"); - -static struct regulator_init_data mx21ads_lcd_regulator_init_data = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .consumer_supplies = &mx21ads_lcd_regulator_consumer, - .num_consumer_supplies = 1, -}; - -static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { - .supply_name = "LCD", - .microvolts = 3300000, - .init_data = &mx21ads_lcd_regulator_init_data, -}; - -static struct platform_device mx21ads_lcd_regulator = { - .name = "reg-fixed-voltage", - .id = PLATFORM_DEVID_AUTO, - .dev = { - .platform_data = &mx21ads_lcd_regulator_pdata, - }, -}; - -static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = { - .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ - .table = { - GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* - * Connected is a portrait Sharp-QVGA display - * of type: LQ035Q7DB02 - */ -static struct imx_fb_videomode mx21ads_modes[] = { - { - .mode = { - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 188679, /* in ps (5.3MHz) */ - .hsync_len = 2, - .left_margin = 6, - .right_margin = 16, - .vsync_len = 1, - .upper_margin = 8, - .lower_margin = 10, - }, - .pcr = 0xfb108bc7, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { - .mode = mx21ads_modes, - .num_modes = ARRAY_SIZE(mx21ads_modes), - - .pwmr = 0x00a903ff, - .lscr1 = 0x00120300, - .dmacr = 0x00020008, -}; - -static int mx21ads_sdhc_get_ro(struct device *dev) -{ - return gpio_get_value(MX21ADS_IO_SD_WP); -} - -static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); - if (ret) - return ret; - - return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); -} - -static void mx21ads_sdhc_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); - gpio_free(MX21ADS_IO_SD_WP); -} - -static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { - .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */ - .get_ro = mx21ads_sdhc_get_ro, - .init = mx21ads_sdhc_init, - .exit = mx21ads_sdhc_exit, -}; - -static const struct mxc_nand_platform_data -mx21ads_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &mx21ads_mmgpio, - &mx21ads_lcd_regulator, - &mx21ads_nor_mtd_device, -}; - -static void __init mx21ads_board_init(void) -{ - imx21_soc_init(); - - mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), - "mx21ads"); - - imx21_add_imx_uart0(&uart_pdata_rts); - imx21_add_imx_uart2(&uart_pdata_norts); - imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_mxc_nand(&mx21ads_nand_board_info); - - imx21_add_imx_fb(&mx21ads_fb_data); -} - -static void __init mx21ads_late_init(void) -{ - imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); - - gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - - mx21ads_cs8900_resources[1].start = - gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); - mx21ads_cs8900_resources[1].end = - gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); - platform_device_register_full(&mx21ads_cs8900_devinfo); -} - -static void __init mx21ads_timer_init(void) -{ - mx21_clocks_init(32768, 26000000); -} - -MACHINE_START(MX21ADS, "Freescale i.MX21ADS") - /* maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx21_map_io, - .init_early = imx21_init_early, - .init_irq = mx21_init_irq, - .init_time = mx21ads_timer_init, - .init_machine = mx21ads_board_init, - .init_late = mx21ads_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c deleted file mode 100644 index 2db4475b7f85..000000000000 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ /dev/null @@ -1,470 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - */ - -/* - * This machine is known as: - * - i.MX27 3-Stack Development System - * - i.MX27 Platform Development Kit (i.MX27 PDK) - */ - -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/irq.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/delay.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) -#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) -#define SPI2_SS0 IMX_GPIO_NR(4, 21) -#define PMIC_INT IMX_GPIO_NR(3, 14) -#define SPI1_SS0 IMX_GPIO_NR(4, 28) -#define SD1_CD IMX_GPIO_NR(2, 26) -#define LCD_RESET IMX_GPIO_NR(1, 3) -#define LCD_ENABLE IMX_GPIO_NR(1, 31) - -static const int mx27pdk_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* SDHC1 */ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT, - /* OTG */ - OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT, - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* CSPI1 */ - PD31_PF_CSPI1_MOSI, - PD30_PF_CSPI1_MISO, - PD29_PF_CSPI1_SCLK, - PD25_PF_CSPI1_RDY, - SPI1_SS0 | GPIO_GPIO | GPIO_OUT, - /* CSPI2 */ - PD22_PF_CSPI2_SCLK, - PD23_PF_CSPI2_MISO, - PD24_PF_CSPI2_MOSI, - SPI2_SS0 | GPIO_GPIO | GPIO_OUT, - /* I2C1 */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* PMIC INT */ - PMIC_INT | GPIO_GPIO | GPIO_IN, - /* LCD */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - LCD_ENABLE | GPIO_GPIO | GPIO_OUT, - LCD_RESET | GPIO_GPIO | GPIO_OUT, - /* SSI4 */ - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD, - PC18_PF_SSI4_TXD, - PC19_PF_SSI4_CLK, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* - * Matrix keyboard - */ - -static const uint32_t mx27_3ds_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), -}; - -static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { - .keymap = mx27_3ds_keymap, - .keymap_size = ARRAY_SIZE(mx27_3ds_keymap), -}; - -static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - return request_irq(gpio_to_irq(SD1_CD), detect_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); -} - -static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SD1_CD), data); -} - -static const struct imxmmc_platform_data sdhc1_pdata __initconst = { - .init = mx27_3ds_sdhc1_init, - .exit = mx27_3ds_sdhc1_exit, -}; - -static void mx27_3ds_sdhc1_enable_level_translator(void) -{ - /* Turn on TXB0108 OE pin */ - gpio_request(SD1_EN_GPIO, "sd1_enable"); - gpio_direction_output(SD1_EN_GPIO, 1); -} - - -static int otg_phy_init(void) -{ - gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset"); - gpio_direction_output(OTG_PHY_RESET_GPIO, 0); - mdelay(1); - gpio_set_value(OTG_PHY_RESET_GPIO, 1); - return 0; -} - -static int mx27_3ds_otg_init(struct platform_device *pdev) -{ - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = mx27_3ds_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init mx27_3ds_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", mx27_3ds_otg_mode); - -/* Regulators */ -static struct regulator_init_data gpo_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("vcore", "spi0.0"), -}; - -static struct regulator_init_data vmmc1_init = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), - .consumer_supplies = vmmc1_consumers, -}; - -static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd", "spi0.0"), -}; - -static struct regulator_init_data vgen_init = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), - .consumer_supplies = vgen_consumers, -}; - -static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { - { - .id = MC13783_REG_VMMC1, - .init_data = &vmmc1_init, - }, { - .id = MC13783_REG_VGEN, - .init_data = &vgen_init, - }, { - .id = MC13783_REG_GPO1, /* Turn on 1.8V */ - .init_data = &gpo_init, - }, { - .id = MC13783_REG_GPO3, /* Turn on 3.3V */ - .init_data = &gpo_init, - }, -}; - -/* MC13783 */ -static struct mc13xxx_codec_platform_data mx27_3ds_codec = { - .dac_ssi_port = MC13783_SSI1_PORT, - .adc_ssi_port = MC13783_SSI1_PORT, -}; - -static struct mc13xxx_platform_data mc13783_pdata = { - .regulators = { - .regulators = mx27_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), - - }, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | - MC13XXX_USE_CODEC, - .codec = &mx27_3ds_codec, -}; - -static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { - .flags = IMX_SSI_DMA | IMX_SSI_NET, -}; - -/* SPI */ -static struct gpiod_lookup_table mx27_spi1_gpiod_table = { - .dev_id = "imx27-cspi.0", /* Actual device name for spi1 */ - .table = { - /* - * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO - * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28). - * - * This is in "bank 4" which is subtracted by one in the macro - * so this is actually bank 3 on "imx21-gpio.3". - */ - GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table mx27_spi2_gpiod_table = { - .dev_id = "imx27-cspi.1", /* Actual device name for spi2 */ - .table = { - /* - * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO - * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21). - * - * This is in "bank 4" which is subtracted by one in the macro - * so this is actually bank 3 on "imx21-gpio.3". - */ - GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct imx_fb_videomode mx27_3ds_modes[] = { - { /* 480x640 @ 60 Hz */ - .mode = { - .name = "Epson-VGA", - .refresh = 60, - .xres = 480, - .yres = 640, - .pixclock = 41701, - .left_margin = 20, - .right_margin = 41, - .upper_margin = 10, - .lower_margin = 5, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_OE_ACT_HIGH | - FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - .bpp = 16, - .pcr = 0xFAC08B82, - }, -}; - -static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { - .mode = mx27_3ds_modes, - .num_modes = ARRAY_SIZE(mx27_3ds_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -/* LCD */ -static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = { - .dev_id = "spi0.0", /* Bus 0 chipselect 0 */ - .table = { - /* - * The i.MX27 has the i.MX21 GPIO controller, the GPIOs - * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31) - * are in "bank 1" which is subtracted by one in the macro - * so these are actually bank 0 on "imx21-gpio.0". - */ - GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { - { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, /* SS0 */ - .platform_data = &mc13783_pdata, - /* irq number is run-time assigned */ - .mode = SPI_CS_HIGH, - }, { - .modalias = "l4f00242t03", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 0, /* SS0 */ - }, -}; - -static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static void __init mx27pdk_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), - "mx27pdk"); - imx27_add_imx_uart0(&uart_pdata); - imx27_add_fec(NULL); - imx27_add_imx_keypad(&mx27_3ds_keymap_data); - imx27_add_imx2_wdt(); - - imx27_add_spi_imx1(&mx27_spi2_gpiod_table); - imx27_add_spi_imx0(&mx27_spi1_gpiod_table); - - imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); - imx27_add_imx_fb(&mx27_3ds_fb_data); - - imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); -} - -static void __init mx27pdk_late_init(void) -{ - mx27_3ds_sdhc1_enable_level_translator(); - imx27_add_mxc_mmc(0, &sdhc1_pdata); - - otg_phy_init(); - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - - if (otg_pdata.otg) - imx27_add_mxc_ehci_otg(&otg_pdata); - } - - if (!otg_mode_host) - imx27_add_fsl_usb2_udc(&otg_device_pdata); - - gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table); - mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); - spi_register_board_info(mx27_3ds_spi_devs, - ARRAY_SIZE(mx27_3ds_spi_devs)); - - if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) - pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); - - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); -} - -static void __init mx27pdk_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(MX27_3DS, "Freescale MX27PDK") - /* maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = mx27pdk_timer_init, - .init_machine = mx27pdk_init, - .init_late = mx27pdk_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c deleted file mode 100644 index ba202f95bcdf..000000000000 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ /dev/null @@ -1,407 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ -#include <linux/gpio/driver.h> -/* Needed for gpio_to_irq() */ -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/i2c.h> -#include <linux/irq.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx27.h" -#include "hardware.h" -#include "iomux-mx27.h" - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xf4300000 -#define PBC_REG_ADDR(offset) (void __force __iomem *) \ - (PBC_BASE_ADDRESS + (offset)) - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -static const int mx27ads_pins[] __initconst = { - /* UART0 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART1 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART2 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* UART3 */ - PB26_AF_UART4_RTS, - PB28_AF_UART4_TXD, - PB29_AF_UART4_CTS, - PB31_AF_UART4_RXD, - /* UART4 */ - PB18_AF_UART5_TXD, - PB19_AF_UART5_RXD, - PB20_AF_UART5_CTS, - PB21_AF_UART5_RTS, - /* UART5 */ - PB10_AF_UART6_TXD, - PB12_AF_UART6_CTS, - PB11_AF_UART6_RXD, - PB13_AF_UART6_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* FB */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA24_PF_REV, - PA25_PF_CLS, - PA26_PF_PS, - PA27_PF_SPL_SPR, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA30_PF_CONTRAST, - PA31_PF_OE_ACD, - /* OWIRE */ - PE16_AF_OWIRE, - /* SDHC1*/ - PE18_PF_SD1_D0, - PE19_PF_SD1_D1, - PE20_PF_SD1_D2, - PE21_PF_SD1_D3, - PE22_PF_SD1_CMD, - PE23_PF_SD1_CLK, - /* SDHC2*/ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, -}; - -static const struct mxc_nand_platform_data -mx27ads_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -/* ADS's NOR flash */ -static struct physmap_flash_data mx27ads_flash_data = { - .width = 2, -}; - -static struct resource mx27ads_flash_resource = { - .start = 0xc0000000, - .end = 0xc0000000 + 0x02000000 - 1, - .flags = IORESOURCE_MEM, - -}; - -static struct platform_device mx27ads_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx27ads_flash_data, - }, - .num_resources = 1, - .resource = &mx27ads_flash_resource, -}; - -static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info mx27ads_i2c_devices[] = { -}; - -static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); - else - imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); -} - -static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) -{ - return 0; -} - -#define MX27ADS_LCD_GPIO (6 * 32) - -static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer = - REGULATOR_SUPPLY("lcd", "imx-fb.0"); - -static struct regulator_init_data mx27ads_lcd_regulator_init_data = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, -}, - .consumer_supplies = &mx27ads_lcd_regulator_consumer, - .num_consumer_supplies = 1, -}; - -static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { - .supply_name = "LCD", - .microvolts = 3300000, - .init_data = &mx27ads_lcd_regulator_init_data, -}; - -static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = { - .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ - .table = { - GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init mx27ads_regulator_init(void) -{ - struct gpio_chip *vchip; - - vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); - vchip->owner = THIS_MODULE; - vchip->label = "LCD"; - vchip->base = MX27ADS_LCD_GPIO; - vchip->ngpio = 1; - vchip->direction_output = vgpio_dir_out; - vchip->set = vgpio_set; - gpiochip_add_data(vchip, NULL); - - gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table); - - platform_device_register_data(NULL, "reg-fixed-voltage", - PLATFORM_DEVID_AUTO, - &mx27ads_lcd_regulator_pdata, - sizeof(mx27ads_lcd_regulator_pdata)); -} - -static struct imx_fb_videomode mx27ads_modes[] = { - { - .mode = { - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 188679, /* in ps (5.3MHz) */ - .hsync_len = 1, - .left_margin = 9, - .right_margin = 16, - .vsync_len = 1, - .upper_margin = 7, - .lower_margin = 9, - }, - .bpp = 16, - .pcr = 0xFB008BC0, - }, -}; - -static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { - .mode = mx27ads_modes, - .num_modes = ARRAY_SIZE(mx27ads_modes), - - /* - * - HSYNC active high - * - VSYNC active high - * - clk notenabled while idle - * - clock inverted - * - data not inverted - * - data enable low active - * - enable sharp mode - */ - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq, - IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); -} - -static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq, - IRQF_TRIGGER_RISING, "sdhc2-card-detect", data); -} - -static void mx27ads_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data); -} - -static void mx27ads_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data); -} - -static const struct imxmmc_platform_data sdhc1_pdata __initconst = { - .init = mx27ads_sdhc1_init, - .exit = mx27ads_sdhc1_exit, -}; - -static const struct imxmmc_platform_data sdhc2_pdata __initconst = { - .init = mx27ads_sdhc2_init, - .exit = mx27ads_sdhc2_exit, -}; - -static struct platform_device *platform_devices[] __initdata = { - &mx27ads_nor_mtd_device, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static void __init mx27ads_board_init(void) -{ - imx27_soc_init(); - - mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), - "mx27ads"); - - imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_uart1(&uart_pdata); - imx27_add_imx_uart2(&uart_pdata); - imx27_add_imx_uart3(&uart_pdata); - imx27_add_imx_uart4(&uart_pdata); - imx27_add_imx_uart5(&uart_pdata); - imx27_add_mxc_nand(&mx27ads_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, mx27ads_i2c_devices, - ARRAY_SIZE(mx27ads_i2c_devices)); - imx27_add_imx_i2c(1, &mx27ads_i2c1_data); - imx27_add_imx_fb(&mx27ads_fb_data); - - imx27_add_fec(NULL); - imx27_add_mxc_w1(); -} - -static void __init mx27ads_late_init(void) -{ - mx27ads_regulator_init(); - - imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_mxc_mmc(1, &sdhc2_pdata); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); -} - -static void __init mx27ads_timer_init(void) -{ - unsigned long fref = 26000000; - - if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) - fref = 27000000; - - mx27_clocks_init(fref); -} - -static struct map_desc mx27ads_io_desc[] __initdata = { - { - .virtual = PBC_BASE_ADDRESS, - .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -static void __init mx27ads_map_io(void) -{ - mx27_map_io(); - iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); -} - -MACHINE_START(MX27ADS, "Freescale i.MX27ADS") - /* maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx27ads_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_time = mx27ads_timer_init, - .init_machine = mx27ads_board_init, - .init_late = mx27ads_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c deleted file mode 100644 index 23e63d3b4c6a..000000000000 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ /dev/null @@ -1,615 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/regulator/machine.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static int mx31_3ds_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), - /*SPI0*/ - IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), - /* SPI 1 */ - MX31_PIN_CSPI2_SCLK__SCLK, - MX31_PIN_CSPI2_MOSI__MOSI, - MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, - MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ - /* MC13783 IRQ */ - IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), - /* USB OTG reset */ - IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO), - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /*Keyboard*/ - MX31_PIN_KEY_ROW0_KEY_ROW0, - MX31_PIN_KEY_ROW1_KEY_ROW1, - MX31_PIN_KEY_ROW2_KEY_ROW2, - MX31_PIN_KEY_COL0_KEY_COL0, - MX31_PIN_KEY_COL1_KEY_COL1, - MX31_PIN_KEY_COL2_KEY_COL2, - MX31_PIN_KEY_COL3_KEY_COL3, - /* USB Host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1), - /* USB Host2 reset */ - IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO), - /* I2C1 */ - MX31_PIN_I2C_CLK__I2C1_SCL, - MX31_PIN_I2C_DAT__I2C1_SDA, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */ - MX31_PIN_GPIO3_0__GPIO3_0, /* OE */ - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_CONTRAST__CONTRAST, - /* SSI */ - MX31_PIN_STXD4__STXD4, - MX31_PIN_SRXD4__SRXD4, - MX31_PIN_SCK4__SCK4, - MX31_PIN_SFS4__SFS4, -}; - -/* - * FB support - */ -static const struct fb_videomode fb_modedb[] = { - { /* 480x640 @ 60 Hz */ - .name = "Epson-VGA", - .refresh = 60, - .xres = 480, - .yres = 640, - .pixclock = 41701, - .left_margin = 20, - .right_margin = 41, - .upper_margin = 10, - .lower_margin = 5, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Epson-VGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -/* LCD */ -static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = { - .dev_id = "spi0.2", /* Bus 0 chipselect 2 */ - .table = { - /* - * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)). - * The macro only shifts 88 to bits 9..16 and then - * mask it and shift it back. The GPIO number is 88. - * 88 is 2*32+24 - */ - GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH), - /* - * Same reasoning as above for - * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25. - */ - GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* - * Support for SD card slot in personality board - */ -#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) - -static struct gpio mx31_3ds_sdhc1_gpios[] = { - { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" }, - { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" }, -}; - -static int mx31_3ds_sdhc1_init(struct device *dev, - irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); - if (ret) { - pr_warn("Unable to request the SD/MMC GPIOs.\n"); - return ret; - } - - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), - detect_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "sdhc1-detect", data); - if (ret) { - pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); - goto gpio_free; - } - - return 0; - -gpio_free: - gpio_free_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); - return ret; -} - -static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); - gpio_free_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); -} - -static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd) -{ - /* - * While the voltage stuff is done by the driver, activate the - * Buffer Enable Pin only if there is a card in slot to fix the card - * voltage issue caused by bi-directional chip TXB0108 on 3Stack. - * Done here because at this stage we have for sure a debounced value - * of the presence of the card, showed by the value of vdd. - * 7 == ilog2(MMC_VDD_165_195) - */ - if (vdd > 7) - gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1); - else - gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0); -} - -static struct imxmmc_platform_data sdhc1_pdata = { - .init = mx31_3ds_sdhc1_init, - .exit = mx31_3ds_sdhc1_exit, - .setpower = mx31_3ds_sdhc1_setpower, -}; - -/* - * Matrix keyboard - */ - -static const uint32_t mx31_3ds_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), -}; - -static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = { - .keymap = mx31_3ds_keymap, - .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), -}; - -/* Regulators */ -static struct regulator_init_data pwgtx_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data gpo_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_consumer_supply vmmc2_consumers[] = { - REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"), -}; - -static struct regulator_init_data vmmc2_init = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers), - .consumer_supplies = vmmc2_consumers, -}; - -static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("vcore", "spi0.0"), -}; - -static struct regulator_init_data vmmc1_init = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), - .consumer_supplies = vmmc1_consumers, -}; - -static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd", "spi0.0"), -}; - -static struct regulator_init_data vgen_init = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), - .consumer_supplies = vgen_consumers, -}; - -static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { - { - .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ - .init_data = &pwgtx_init, - }, { - .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */ - .init_data = &pwgtx_init, - }, { - - .id = MC13783_REG_GPO1, /* Turn on 1.8V */ - .init_data = &gpo_init, - }, { - .id = MC13783_REG_GPO3, /* Turn on 3.3V */ - .init_data = &gpo_init, - }, { - .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */ - .init_data = &vmmc2_init, - }, { - .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */ - .init_data = &vmmc1_init, - }, { - .id = MC13783_REG_VGEN, /* Power LCD */ - .init_data = &vgen_init, - }, -}; - -/* MC13783 */ -static struct mc13xxx_codec_platform_data mx31_3ds_codec = { - .dac_ssi_port = MC13783_SSI1_PORT, - .adc_ssi_port = MC13783_SSI1_PORT, -}; - -static struct mc13xxx_platform_data mc13783_pdata = { - .regulators = { - .regulators = mx31_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - }, - .codec = &mx31_3ds_codec, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC, - -}; - -static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = { - .flags = IMX_SSI_DMA | IMX_SSI_NET, -}; - -static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { - { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 2, /* SS2 */ - .platform_data = &mc13783_pdata, - /* irq number is run-time assigned */ - .mode = SPI_CS_HIGH, - }, { - .modalias = "l4f00242t03", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 2, /* SS2 */ - }, -}; - -/* - * NAND Flash - */ -static const struct mxc_nand_platform_data -mx31_3ds_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT - .flash_bbt = 1, -#endif -}; - -/* - * USB OTG - */ - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) -#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP) - -static int mx31_3ds_usbotg_init(void) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - err = gpio_request(USBOTG_RST_B, "otgusb-reset"); - if (err) { - pr_err("Failed to request the USB OTG reset gpio\n"); - return err; - } - - err = gpio_direction_output(USBOTG_RST_B, 0); - if (err) { - pr_err("Failed to drive the USB OTG reset gpio\n"); - goto usbotg_free_reset; - } - - mdelay(1); - gpio_set_value(USBOTG_RST_B, 1); - return 0; - -usbotg_free_reset: - gpio_free(USBOTG_RST_B); - return err; -} - -static int mx31_3ds_otg_init(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static int mx31_3ds_host2_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG); - - err = gpio_request(USBH2_RST_B, "usbh2-reset"); - if (err) { - pr_err("Failed to request the USB Host 2 reset gpio\n"); - return err; - } - - err = gpio_direction_output(USBH2_RST_B, 0); - if (err) { - pr_err("Failed to drive the USB Host 2 reset gpio\n"); - goto usbotg_free_reset; - } - - mdelay(1); - gpio_set_value(USBH2_RST_B, 1); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); - -usbotg_free_reset: - gpio_free(USBH2_RST_B); - return err; -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = mx31_3ds_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = mx31_3ds_host2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init mx31_3ds_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", mx31_3ds_otg_mode); - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static void __init mx31_3ds_init(void) -{ - imx31_soc_init(); - - /* Configure SPI1 IOMUX */ - mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); - - mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), - "mx31_3ds"); - - imx31_add_imx_uart0(&uart_pdata); - imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - - imx31_add_spi_imx1(NULL); - - imx31_add_imx_keypad(&mx31_3ds_keymap_data); - - imx31_add_imx2_wdt(); - imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); - - imx31_add_spi_imx0(NULL); - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); - - imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); -} - -static void __init mx31_3ds_late(void) -{ - gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table); - mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(mx31_3ds_spi_devs, - ARRAY_SIZE(mx31_3ds_spi_devs)); - - mx31_3ds_usbotg_init(); - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx31_add_mxc_ehci_otg(&otg_pdata); - } - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - - if (!otg_mode_host) - imx31_add_fsl_usb2_udc(&usbotg_pdata); - - if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) - printk(KERN_WARNING "Init of the debug board failed, all " - "devices on the debug board are unusable.\n"); - - imx31_add_mxc_mmc(0, &sdhc1_pdata); -} - -static void __init mx31_3ds_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31_3ds_timer_init, - .init_machine = mx31_3ds_init, - .init_late = mx31_3ds_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c deleted file mode 100644 index 49783385bccf..000000000000 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ /dev/null @@ -1,579 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -#include <linux/mfd/wm8350/audio.h> -#include <linux/mfd/wm8350/core.h> -#include <linux/mfd/wm8350/pmic.h> -#endif - -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) - -#define EXPIO_INT_XUART_INTA 10 -#define EXPIO_INT_XUART_INTB 11 - -#define MXC_MAX_EXP_IO_LINES 16 - -/* CS8900 */ -#define EXPIO_INT_ENET_INT 8 -#define CS4_CS8900_MMIO_START 0x20000 - -static struct irq_domain *domain; - -/* - * The serial port definition structure. - */ -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), - .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, - }, { - .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), - .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, - }, - {}, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct resource mx31ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), - DEFINE_RES_IRQ(-1), -}; - -static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { - .name = "cs89x0", - .id = 0, - .res = mx31ads_cs8900_resources, - .num_res = ARRAY_SIZE(mx31ads_cs8900_resources), -}; - -static int __init mxc_init_extuart(void) -{ - serial_platform_data[0].irq = irq_find_mapping(domain, - EXPIO_INT_XUART_INTA); - serial_platform_data[1].irq = irq_find_mapping(domain, - EXPIO_INT_XUART_INTB); - return platform_device_register(&serial_device); -} - -static void __init mxc_init_ext_ethernet(void) -{ - mx31ads_cs8900_resources[1].start = - irq_find_mapping(domain, EXPIO_INT_ENET_INT); - mx31ads_cs8900_resources[1].end = - irq_find_mapping(domain, EXPIO_INT_ENET_INT); - platform_device_register_full( - (struct platform_device_info *)&mx31ads_cs8900_devinfo); -} - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static unsigned int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 -}; - -static inline void mxc_init_imx_uart(void) -{ - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - imx31_add_imx_uart0(&uart_pdata); -} - -static void mx31ads_expio_irq_handler(struct irq_desc *desc) -{ - u32 imr_val; - u32 int_valid; - u32 expio_irq; - - imr_val = imx_readw(PBC_INTMASK_SET_REG); - int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val; - - expio_irq = 0; - for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - if ((int_valid & 1) == 0) - continue; - - generic_handle_irq(irq_find_mapping(domain, expio_irq)); - } -} - -/* - * Disable an expio pin's interrupt by setting the bit in the imr. - * @param d an expio virtual irq description - */ -static void expio_mask_irq(struct irq_data *d) -{ - u32 expio = d->hwirq; - /* mask the interrupt */ - imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG); - imx_readw(PBC_INTMASK_CLEAR_REG); -} - -/* - * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param d an expio virtual irq description - */ -static void expio_ack_irq(struct irq_data *d) -{ - u32 expio = d->hwirq; - /* clear the interrupt status */ - imx_writew(1 << expio, PBC_INTSTATUS_REG); -} - -/* - * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param d an expio virtual irq description - */ -static void expio_unmask_irq(struct irq_data *d) -{ - u32 expio = d->hwirq; - /* unmask the interrupt */ - imx_writew(1 << expio, PBC_INTMASK_SET_REG); -} - -static struct irq_chip expio_irq_chip = { - .name = "EXPIO(CPLD)", - .irq_ack = expio_ack_irq, - .irq_mask = expio_mask_irq, - .irq_unmask = expio_unmask_irq, -}; - -static void __init mx31ads_init_expio(void) -{ - int irq_base; - int i, irq; - - printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); - - /* - * Configure INT line as GPIO input - */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); - - /* disable the interrupt and clear the status */ - imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); - imx_writew(0xFFFF, PBC_INTSTATUS_REG); - - irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); - WARN_ON(irq_base < 0); - - domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, - &irq_domain_simple_ops, NULL); - WARN_ON(!domain); - - for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { - irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } - irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); - irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); - irq_set_chained_handler(irq, mx31ads_expio_irq_handler); -} - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -/* This section defines setup for the Wolfson Microelectronics - * 1133-EV1 PMU/audio board. When other PMU boards are supported the - * regulator definitions may be shared with them, but for now they can - * only be used with this board so would generate warnings about - * unused statics and some of the configuration is specific to this - * module. - */ - -/* CPU */ -static struct regulator_consumer_supply sw1a_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_init_data sw1a_data = { - .constraints = { - .name = "SW1A", - .min_uV = 1275000, - .max_uV = 1600000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .state_mem = { - .uV = 1400000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers), - .consumer_supplies = sw1a_consumers, -}; - -/* System IO - High */ -static struct regulator_init_data viohi_data = { - .constraints = { - .name = "VIOHO", - .min_uV = 2800000, - .max_uV = 2800000, - .state_mem = { - .uV = 2800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* System IO - Low */ -static struct regulator_init_data violo_data = { - .constraints = { - .name = "VIOLO", - .min_uV = 1800000, - .max_uV = 1800000, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* DDR RAM */ -static struct regulator_init_data sw2a_data = { - .constraints = { - .name = "SW2A", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .state_disk = { - .mode = REGULATOR_MODE_NORMAL, - .enabled = 0, - }, - .always_on = 1, - .boot_on = 1, - .initial_state = PM_SUSPEND_MEM, - }, -}; - -static struct regulator_init_data ldo1_data = { - .constraints = { - .name = "VCAM/VMMC1/VMMC2", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, -}; - -static struct regulator_consumer_supply ldo2_consumers[] = { - { .supply = "AVDD", .dev_name = "1-001a" }, - { .supply = "HPVDD", .dev_name = "1-001a" }, -}; - -/* CODEC and SIM */ -static struct regulator_init_data ldo2_data = { - .constraints = { - .name = "VESIM/VSIM/AVDD", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), - .consumer_supplies = ldo2_consumers, -}; - -/* General */ -static struct regulator_init_data vdig_data = { - .constraints = { - .name = "VDIG", - .min_uV = 1500000, - .max_uV = 1500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* Tranceivers */ -static struct regulator_init_data ldo4_data = { - .constraints = { - .name = "VRF1/CVDD_2.775", - .min_uV = 2500000, - .max_uV = 2500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - .boot_on = 1, - }, -}; - -static struct wm8350_led_platform_data wm8350_led_data = { - .name = "wm8350:white", - .default_trigger = "heartbeat", - .max_uA = 27899, -}; - -static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { - .vmid_discharge_msecs = 1000, - .drain_msecs = 30, - .cap_discharge_msecs = 700, - .vmid_charge_msecs = 700, - .vmid_s_curve = WM8350_S_CURVE_SLOW, - .dis_out4 = WM8350_DISCHARGE_SLOW, - .dis_out3 = WM8350_DISCHARGE_SLOW, - .dis_out2 = WM8350_DISCHARGE_SLOW, - .dis_out1 = WM8350_DISCHARGE_SLOW, - .vroi_out4 = WM8350_TIE_OFF_500R, - .vroi_out3 = WM8350_TIE_OFF_500R, - .vroi_out2 = WM8350_TIE_OFF_500R, - .vroi_out1 = WM8350_TIE_OFF_500R, - .vroi_enable = 0, - .codec_current_on = WM8350_CODEC_ISEL_1_0, - .codec_current_standby = WM8350_CODEC_ISEL_0_5, - .codec_current_charge = WM8350_CODEC_ISEL_1_5, -}; - -static int mx31_wm8350_init(struct wm8350 *wm8350) -{ - wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, - WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_ON); - - wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN, - WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_ON); - - wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN, - WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN, - WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT, - WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT, - WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT, - WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data); - wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data); - wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data); - wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data); - wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data); - - /* LEDs */ - wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1, - WM8350_DC5_ERRACT_SHUTDOWN_CONV); - wm8350_isink_set_flash(wm8350, WM8350_ISINK_A, - WM8350_ISINK_FLASH_DISABLE, - WM8350_ISINK_FLASH_TRIG_BIT, - WM8350_ISINK_FLASH_DUR_32MS, - WM8350_ISINK_FLASH_ON_INSTANT, - WM8350_ISINK_FLASH_OFF_INSTANT, - WM8350_ISINK_FLASH_MODE_EN); - wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5, - WM8350_ISINK_MODE_BOOST, - WM8350_ISINK_ILIM_NORMAL, - WM8350_DC5_RMP_20V, - WM8350_DC5_FBSRC_ISINKA); - wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A, - &wm8350_led_data); - - wm8350->codec.platform_data = &imx32ads_wm8350_setup; - - regulator_has_full_constraints(); - - return 0; -} - -static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { - .init = mx31_wm8350_init, -}; -#endif - -static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 - { - I2C_BOARD_INFO("wm8350", 0x1a), - .platform_data = &mx31_wm8350_pdata, - /* irq number is run-time assigned */ - }, -#endif -}; - -static void __init mxc_init_i2c(void) -{ -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 - mx31ads_i2c1_devices[0].irq = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); -#endif - i2c_register_board_info(1, mx31ads_i2c1_devices, - ARRAY_SIZE(mx31ads_i2c1_devices)); - - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); - - imx31_add_imx_i2c1(NULL); -} - -static unsigned int ssi_pins[] = { - MX31_PIN_SFS5__SFS5, - MX31_PIN_SCK5__SCK5, - MX31_PIN_SRXD5__SRXD5, - MX31_PIN_STXD5__STXD5, -}; - -static void __init mxc_init_audio(void) -{ - imx31_add_imx_ssi(0, NULL); - mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); -} - -/* - * Static mappings, starting from the CS4 start address up to the start address - * of the CS8900. - */ -static struct map_desc mx31ads_io_desc[] __initdata = { - { - .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = CS4_CS8900_MMIO_START, - .type = MT_DEVICE - }, -}; - -static void __init mx31ads_map_io(void) -{ - mx31_map_io(); - iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); -} - -static void __init mx31ads_init(void) -{ - imx31_soc_init(); - - mxc_init_imx_uart(); - mxc_init_audio(); -} - -static void __init mx31ads_late(void) -{ - mx31ads_init_expio(); - mxc_init_extuart(); - mxc_init_i2c(); - mxc_init_ext_ethernet(); -} - -static void __init mx31ads_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(MX31ADS, "Freescale MX31ADS") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx31ads_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31ads_timer_init, - .init_machine = mx31ads_init, - .init_late = mx31ads_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c deleted file mode 100644 index 4b955ccc92cd..000000000000 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ /dev/null @@ -1,312 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * LILLY-1131 module support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/smsc911x.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/mfd/mc13783.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "board-mx31lilly.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -/* - * This file contains module-specific initialization routines for LILLY-1131. - * Initialization of peripherals found on the baseboard is implemented in the - * appropriate baseboard support code. - */ - -static unsigned int mx31lilly_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, -}; - -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* SMSC ethernet support */ - -static struct resource smsc91x_resources[] = { - { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 0xffff, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, - } -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | - SMSC911X_SAVE_MAC_ADDRESS | - SMSC911X_FORCE_INTERNAL_PHY, -}; - -static struct platform_device smsc91x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc91x_resources), - .resource = smsc91x_resources, - .dev = { - .platform_data = &smsc911x_config, - } -}; - -/* NOR flash */ -static struct physmap_flash_data nor_flash_data = { - .width = 2, -}; - -static struct resource nor_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device physmap_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = &nor_flash_resource, - .num_resources = 1, -}; - -/* USB */ - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbh1_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_MISO__USBH1_RXDP, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, - MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, - MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1"); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_SINGLE_UNI); -} - -static int usbh2_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_USBH2_CLK__USBH2_CLK, - MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, - MX31_PIN_USBH2_STP__USBH2_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), - "USBH2_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { - .init = usbh1_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, -}; - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -static void __init lilly1131_usb_init(void) -{ - imx31_add_mxc_ehci_hs(1, &usbh1_pdata); - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); -} - -static struct mc13xxx_platform_data mc13783_pdata __initdata = { - .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, -}; - -static struct spi_board_info mc13783_dev __initdata = { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &mc13783_pdata, - /* irq number is run-time assigned */ -}; - -static struct platform_device *devices[] __initdata = { - &smsc91x_device, - &physmap_flash_device, -}; - -static int mx31lilly_baseboard; -core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -static void __init mx31lilly_board_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(mx31lilly_pins, - ARRAY_SIZE(mx31lilly_pins), "mx31lily"); - - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); - - mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); - - /* SPI */ - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2"); - - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); - - imx31_add_spi_imx0(NULL); - imx31_add_spi_imx1(NULL); - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); -} - -static void __init mx31lilly_late_init(void) -{ - if (mx31lilly_baseboard == MX31LILLY_DB) - mx31lilly_db_init(); - - mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(&mc13783_dev, 1); - - smsc91x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - smsc91x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - /* USB */ - lilly1131_usb_init(); -} - -static void __init mx31lilly_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31lilly_timer_init, - .init_machine = mx31lilly_board_init, - .init_late = mx31lilly_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c deleted file mode 100644 index aaccf52f7ac1..000000000000 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ /dev/null @@ -1,290 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/memory.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/moduleparam.h> -#include <linux/smsc911x.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/mtd/physmap.h> -#include <linux/delay.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <asm/page.h> -#include <asm/setup.h> - -#include "board-mx31lite.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -/* - * This file contains the module-specific initialization routines. - */ - -static unsigned int mx31lite_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* SPI 0 */ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* LAN9117 IRQ pin */ - IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), - /* SPI 1 */ - MX31_PIN_CSPI2_SCLK__SCLK, - MX31_PIN_CSPI2_MOSI__MOSI, - MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, - MX31_PIN_CSPI2_SS1__SS1, - MX31_PIN_CSPI2_SS2__SS2, -}; - -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -mx31lite_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT, -}; - -static struct resource smsc911x_resources[] = { - { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 0x100, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; - -static struct mc13xxx_platform_data mc13783_pdata __initdata = { - .flags = MC13XXX_USE_RTC, -}; - -static struct spi_board_info mc13783_spi_dev __initdata = { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &mc13783_pdata, - /* irq number is run-time assigned */ -}; - -/* - * USB - */ - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbh2_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_USBH2_CLK__USBH2_CLK, - MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, - MX31_PIN_USBH2_STP__USBH2_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), - "USBH2_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -/* - * NOR flash - */ - -static struct physmap_flash_data nor_flash_data = { - .width = 2, -}; - -static struct resource nor_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device physmap_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = &nor_flash_resource, - .num_resources = 1, -}; - -/* - * This structure defines the MX31 memory map. - */ -static struct map_desc mx31lite_io_desc[] __initdata = { - { - .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE, - .type = MT_DEVICE - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init mx31lite_map_io(void) -{ - mx31_map_io(); - iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); -} - -static int mx31lite_baseboard; -core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -static void __init mx31lite_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), - "mx31lite"); - - imx31_add_imx_uart0(&uart_pdata); - imx31_add_spi_imx0(NULL); - - /* NOR and NAND flash */ - platform_device_register(&physmap_flash_device); - imx31_add_mxc_nand(&mx31lite_nand_board_info); - - imx31_add_spi_imx1(NULL); - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); -} - -static void __init mx31lite_late(void) -{ - int ret; - - if (mx31lite_baseboard == MX31LITE_DB) - mx31lite_db_init(); - - mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(&mc13783_spi_dev, 1); - - /* USB */ - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - - /* SMSC9117 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); - if (ret) - pr_warn("could not get LAN irq gpio\n"); - else { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); - smsc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); - smsc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); - platform_device_register(&smsc911x_device); - } -} - -static void __init mx31lite_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx31lite_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31lite_timer_init, - .init_machine = mx31lite_init, - .init_late = mx31lite_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c deleted file mode 100644 index 96845a4eaf57..000000000000 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ /dev/null @@ -1,581 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/gfp.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/leds.h> -#include <linux/memory.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/types.h> -#include <linux/memblock.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/input.h> - -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <asm/memblock.h> -#include <linux/platform_data/asoc-imx-ssi.h> - -#include "board-mx31moboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static unsigned int moboard_pins[] = { - /* UART0 */ - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS1__GPIO2_7, - /* UART4 */ - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, - /* I2C0 */ - MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, - /* I2C1 */ - MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, - /* USB reset */ - MX31_PIN_GPIO1_0__GPIO1_0, - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, - MX31_PIN_USB_OC__GPIO1_30, - /* USB H2 */ - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3, - MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5, - MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7, - MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP, - MX31_PIN_SCK6__GPIO1_25, - /* LEDs */ - MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, - MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, - /* SPI1 */ - MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2, - /* Atlas IRQ */ - MX31_PIN_GPIO1_3__GPIO1_3, - /* SPI2 */ - MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO, - MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS1__CSPI3_SS1, - /* SSI */ - MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4, - MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4, -}; - -static struct physmap_flash_data mx31moboard_flash_data = { - .width = 2, -}; - -static struct resource mx31moboard_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mx31moboard_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx31moboard_flash_data, - }, - .resource = &mx31moboard_flash_resource, - .num_resources = 1, -}; - -static void __init moboard_uart0_init(void) -{ - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) { - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); - gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); - } -} - -static const struct imxuart_platform_data uart0_pdata __initconst = { -}; - -static const struct imxuart_platform_data uart4_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data moboard_i2c0_data __initconst = { - .bitrate = 400000, -}; - -static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static struct regulator_consumer_supply sdhc_consumers[] = { - { - .dev_name = "imx31-mmc.0", - .supply = "sdhc0_vcc", - }, - { - .dev_name = "imx31-mmc.1", - .supply = "sdhc1_vcc", - }, -}; - -static struct regulator_init_data sdhc_vreg_data = { - .constraints = { - .min_uV = 2700000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers), - .consumer_supplies = sdhc_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev_name = "mx3_camera.0", - .supply = "cam_vcc", - }, -}; - -static struct regulator_init_data cam_vreg_data = { - .constraints = { - .min_uV = 2700000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -static struct mc13xxx_regulator_init_data moboard_regulators[] = { - { - .id = MC13783_REG_VMMC1, - .init_data = &sdhc_vreg_data, - }, - { - .id = MC13783_REG_VCAM, - .init_data = &cam_vreg_data, - }, -}; - -static struct mc13xxx_led_platform_data moboard_led[] = { - { - .id = MC13783_LED_R1, - .name = "coreboard-led-4:red", - }, - { - .id = MC13783_LED_G1, - .name = "coreboard-led-4:green", - }, - { - .id = MC13783_LED_B1, - .name = "coreboard-led-4:blue", - }, - { - .id = MC13783_LED_R2, - .name = "coreboard-led-5:red", - }, - { - .id = MC13783_LED_G2, - .name = "coreboard-led-5:green", - }, - { - .id = MC13783_LED_B2, - .name = "coreboard-led-5:blue", - }, -}; - -static struct mc13xxx_leds_platform_data moboard_leds = { - .num_leds = ARRAY_SIZE(moboard_led), - .led = moboard_led, - .led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0), - .led_control[1] = MC13783_LED_C1_SLEWLIM, - .led_control[2] = MC13783_LED_C2_SLEWLIM, - .led_control[3] = MC13783_LED_C3_PERIOD(0) | - MC13783_LED_C3_CURRENT_R1(2) | - MC13783_LED_C3_CURRENT_G1(2) | - MC13783_LED_C3_CURRENT_B1(2), - .led_control[4] = MC13783_LED_C4_PERIOD(0) | - MC13783_LED_C4_CURRENT_R2(3) | - MC13783_LED_C4_CURRENT_G2(3) | - MC13783_LED_C4_CURRENT_B2(3), -}; - -static struct mc13xxx_buttons_platform_data moboard_buttons = { - .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE | - MC13783_BUTTON_POL_INVERT, - .b1on_key = KEY_POWER, -}; - -static struct mc13xxx_codec_platform_data moboard_codec = { - .dac_ssi_port = MC13783_SSI1_PORT, - .adc_ssi_port = MC13783_SSI1_PORT, -}; - -static struct mc13xxx_platform_data moboard_pmic = { - .regulators = { - .regulators = moboard_regulators, - .num_regulators = ARRAY_SIZE(moboard_regulators), - }, - .leds = &moboard_leds, - .buttons = &moboard_buttons, - .codec = &moboard_codec, - .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC, -}; - -static struct imx_ssi_platform_data moboard_ssi_pdata = { - .flags = IMX_SSI_DMA | IMX_SSI_NET, -}; - -static struct spi_board_info moboard_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - /* irq number is run-time assigned */ - .max_speed_hz = 300000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &moboard_pmic, - .mode = SPI_CS_HIGH, - }, -}; - -#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) -#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) - -static int moboard_sdhc1_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC1_WP); -} - -static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC1_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC1_CD); - - ret = gpio_request(SDHC1_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC1_WP); - - ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc1-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC1_WP); -err_gpio_free: - gpio_free(SDHC1_CD); - - return ret; -} - -static void moboard_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC1_CD), data); - gpio_free(SDHC1_WP); - gpio_free(SDHC1_CD); -} - -static const struct imxmmc_platform_data sdhc1_pdata __initconst = { - .get_ro = moboard_sdhc1_get_ro, - .init = moboard_sdhc1_init, - .exit = moboard_sdhc1_exit, -}; - -/* - * this pin is dedicated for all mx31moboard systems, so we do it here - */ -#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0) -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS) - -#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) -#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) - -static void usb_xcvr_reset(void) -{ - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD); - - gpio_request(OTG_EN_B, "usb-udc-en"); - gpio_direction_output(OTG_EN_B, 0); - gpio_request(USBH2_EN_B, "usbh2-en"); - gpio_direction_output(USBH2_EN_B, 0); - - gpio_request(USB_RESET_B, "usb-reset"); - gpio_direction_output(USB_RESET_B, 0); - mdelay(1); - gpio_set_value(USB_RESET_B, 1); - mdelay(1); -} - -static int moboard_usbh2_init_hw(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = moboard_usbh2_init_hw, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -static int __init moboard_usbh2_init(void) -{ - struct platform_device *pdev; - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (!usbh2_pdata.otg) - return -ENODEV; - - pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - - return PTR_ERR_OR_ZERO(pdev); -} - -static const struct gpio_led mx31moboard_leds[] __initconst = { - { - .name = "coreboard-led-0:red:running", - .default_trigger = "heartbeat", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), - }, { - .name = "coreboard-led-1:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0), - }, { - .name = "coreboard-led-2:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0), - }, { - .name = "coreboard-led-3:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0), - }, -}; - -static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { - .num_leds = ARRAY_SIZE(mx31moboard_leds), - .leds = mx31moboard_leds, -}; - -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, -}; - -static struct mx3_camera_pdata camera_pdata __initdata = { - .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 4800, -}; - -static phys_addr_t mx3_camera_base __initdata; -#define MX3_CAMERA_BUF_SIZE SZ_4M - -static int __init mx31moboard_init_cam(void) -{ - int ret; - struct platform_device *pdev; - - imx31_add_ipu_core(); - - pdev = imx31_alloc_mx3_camera(&camera_pdata); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - ret = dma_declare_coherent_memory(&pdev->dev, - mx3_camera_base, mx3_camera_base, - MX3_CAMERA_BUF_SIZE); - if (ret) - goto err; - - ret = platform_device_add(pdev); - if (ret) -err: - platform_device_put(pdev); - - return ret; - -} - -static void mx31moboard_poweroff(void) -{ - struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); - - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); - - imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); -} - -static int mx31moboard_baseboard; -core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); - -/* - * Board specific initialization. - */ -static void __init mx31moboard_init(void) -{ - imx31_soc_init(); - - mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), - "moboard"); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx31_add_imx2_wdt(); - - imx31_add_imx_uart0(&uart0_pdata); - imx31_add_imx_uart4(&uart4_pdata); - - imx31_add_imx_i2c0(&moboard_i2c0_data); - imx31_add_imx_i2c1(&moboard_i2c1_data); - - imx31_add_spi_imx1(NULL); - imx31_add_spi_imx2(NULL); - - mx31moboard_init_cam(); - - imx31_add_imx_ssi(0, &moboard_ssi_pdata); - - pm_power_off = mx31moboard_poweroff; -} - -static void __init mx31moboard_late(void) -{ - gpio_led_register_device(-1, &mx31moboard_led_pdata); - - moboard_uart0_init(); - - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - moboard_spi_board_info[0].irq = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(moboard_spi_board_info, - ARRAY_SIZE(moboard_spi_board_info)); - - imx31_add_mxc_mmc(0, &sdhc1_pdata); - - usb_xcvr_reset(); - moboard_usbh2_init(); - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); - - switch (mx31moboard_baseboard) { - case MX31NOBOARD: - break; - case MX31DEVBOARD: - mx31moboard_devboard_init(); - break; - case MX31MARXBOT: - mx31moboard_marxbot_init(); - break; - case MX31SMARTBOT: - case MX31EYEBOT: - mx31moboard_smartbot_init(mx31moboard_baseboard); - break; - default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", - mx31moboard_baseboard); - } -} - -static void __init mx31moboard_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static void __init mx31moboard_reserve(void) -{ - /* reserve 4 MiB for mx3-camera */ - mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE, - MX3_CAMERA_BUF_SIZE); -} - -MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Philippe Retornaz, EPFL Mobots group */ - .atag_offset = 0x100, - .reserve = mx31moboard_reserve, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31moboard_timer_init, - .init_machine = mx31moboard_init, - .init_late = mx31moboard_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c deleted file mode 100644 index 802e0abe4568..000000000000 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ /dev/null @@ -1,516 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * Copyright (C) 2011 Meprolight, Ltd. - * Alex Gershgorin <alexg@meprolight.com> - * - * Modified from i.MX31 3-Stack Development System - */ - -/* - * This machine is known as: - * - i.MX35 3-Stack Development System - * - i.MX35 Platform Development Kit (i.MX35 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/usb/otg.h> - -#include <linux/mtd/physmap.h> -#include <linux/mfd/mc13892.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <video/platform_lcd.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" - -#define GPIO_MC9S08DZ60_GPS_ENABLE 0 -#define GPIO_MC9S08DZ60_HDD_ENABLE 4 -#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 -#define GPIO_MC9S08DZ60_LCD_ENABLE 6 -#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 - -static const struct fb_videomode fb_modedb[] = { - { - /* 800x480 @ 55 Hz */ - .name = "Ceramate-CLAA070VC01", - .refresh = 55, - .xres = 800, - .yres = 480, - .pixclock = 40000, - .left_margin = 40, - .right_margin = 40, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Ceramate-CLAA070VC01", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct i2c_board_info __initdata i2c_devices_3ds[] = { - { - I2C_BOARD_INFO("mc9s08dz60", 0x69), - }, -}; - -static int lcd_power_gpio = -ENXIO; - -static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data) -{ - return !strcmp(chip->label, data); -} - -static void mx35_3ds_lcd_set_power( - struct plat_lcd_data *pd, unsigned int power) -{ - struct gpio_chip *chip; - - if (!gpio_is_valid(lcd_power_gpio)) { - chip = gpiochip_find( - "mc9s08dz60", mc9s08dz60_gpiochip_match); - if (chip) { - lcd_power_gpio = - chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; - if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { - pr_err("error: gpio already requested!\n"); - lcd_power_gpio = -ENXIO; - } - } else { - pr_err("error: didn't find mc9s08dz60 gpio chip\n"); - } - } - - if (gpio_is_valid(lcd_power_gpio)) - gpio_set_value_cansleep(lcd_power_gpio, power); -} - -static struct plat_lcd_data mx35_3ds_lcd_data = { - .set_power = mx35_3ds_lcd_set_power, -}; - -static struct platform_device mx35_3ds_lcd = { - .name = "platform-lcd", - .dev.platform_data = &mx35_3ds_lcd_data, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct physmap_flash_data mx35pdk_flash_data = { - .width = 2, -}; - -static struct resource mx35pdk_flash_resource = { - .start = MX35_CS0_BASE_ADDR, - .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mx35pdk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx35pdk_flash_data, - }, - .resource = &mx35pdk_flash_resource, - .num_resources = 1, -}; - -static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct platform_device *devices[] __initdata = { - &mx35pdk_flash, -}; - -static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* USBOTG */ - MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - /* USBH1 */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /*PMIC IRQ*/ - MX35_PAD_GPIO2_0__GPIO2_0, -}; - -static struct regulator_consumer_supply sw1_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_consumer_supply vcam_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDA", "0-000a"), -}; - -static struct regulator_init_data sw1_init = { - .constraints = { - .name = "SW1", - .min_uV = 600000, - .max_uV = 1375000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = 0, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), - .consumer_supplies = sw1_consumers, -}; - -static struct regulator_init_data sw2_init = { - .constraints = { - .name = "SW2", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw3_init = { - .constraints = { - .name = "SW3", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw4_init = { - .constraints = { - .name = "SW4", - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data viohi_init = { - .constraints = { - .name = "VIOHI", - .boot_on = 1, - } -}; - -static struct regulator_init_data vusb_init = { - .constraints = { - .name = "VUSB", - .boot_on = 1, - } -}; - -static struct regulator_init_data vdig_init = { - .constraints = { - .name = "VDIG", - .boot_on = 1, - } -}; - -static struct regulator_init_data vpll_init = { - .constraints = { - .name = "VPLL", - .boot_on = 1, - } -}; - -static struct regulator_init_data vusb2_init = { - .constraints = { - .name = "VUSB2", - .boot_on = 1, - } -}; - -static struct regulator_init_data vvideo_init = { - .constraints = { - .name = "VVIDEO", - .boot_on = 1 - } -}; - -static struct regulator_init_data vcam_init = { - .constraints = { - .name = "VCAM", - .min_uV = 2500000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, - .boot_on = 1 - }, - .num_consumer_supplies = ARRAY_SIZE(vcam_consumers), - .consumer_supplies = vcam_consumers, -}; - -static struct regulator_init_data vgen1_init = { - .constraints = { - .name = "VGEN1", - } -}; - -static struct regulator_init_data vgen2_init = { - .constraints = { - .name = "VGEN2", - .boot_on = 1, - } -}; - -static struct regulator_init_data vgen3_init = { - .constraints = { - .name = "VGEN3", - } -}; - -static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { - { .id = MC13892_SW1, .init_data = &sw1_init }, - { .id = MC13892_SW2, .init_data = &sw2_init }, - { .id = MC13892_SW3, .init_data = &sw3_init }, - { .id = MC13892_SW4, .init_data = &sw4_init }, - { .id = MC13892_VIOHI, .init_data = &viohi_init }, - { .id = MC13892_VPLL, .init_data = &vpll_init }, - { .id = MC13892_VDIG, .init_data = &vdig_init }, - { .id = MC13892_VUSB2, .init_data = &vusb2_init }, - { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VCAM, .init_data = &vcam_init }, - { .id = MC13892_VGEN1, .init_data = &vgen1_init }, - { .id = MC13892_VGEN2, .init_data = &vgen2_init }, - { .id = MC13892_VGEN3, .init_data = &vgen3_init }, - { .id = MC13892_VUSB, .init_data = &vusb_init }, -}; - -static struct mc13xxx_platform_data mx35_3ds_mc13892_data = { - .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, - .regulators = { - .num_regulators = ARRAY_SIZE(mx35_3ds_regulators), - .regulators = mx35_3ds_regulators, - }, -}; - -#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) - -static struct i2c_board_info mx35_3ds_i2c_mc13892 = { - - I2C_BOARD_INFO("mc13892", 0x08), - .platform_data = &mx35_3ds_mc13892_data, - /* irq number is run-time assigned */ -}; - -static void __init imx35_3ds_init_mc13892(void) -{ - int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq"); - - if (ret) { - pr_err("failed to get pmic irq: %d\n", ret); - return; - } - - mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); - i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); -} - -static int mx35_3ds_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -/* OTG config */ -static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -/* - * ENGCM09152 also requires a hardware change. - * Please check the MX35 Chip Errata document for details. - */ -}; - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = mx35_3ds_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int mx35_3ds_usbh_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY); -} - -/* USB HOST config */ -static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .init = mx35_3ds_usbh_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static bool otg_mode_host __initdata; - -static int __init mx35_3ds_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", mx35_3ds_otg_mode); - -static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -/* - * Board specific initialization. - */ -static void __init mx35_3ds_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - imx35_add_mxc_rtc(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx35_add_imx_uart0(&uart_pdata); - - if (otg_mode_host) - imx35_add_mxc_ehci_otg(&otg_pdata); - - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - if (!otg_mode_host) - imx35_add_fsl_usb2_udc(&usb_otg_pdata); - - imx35_add_mxc_nand(&mx35pdk_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); - - imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); - - i2c_register_board_info( - 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); - - imx35_add_ipu_core(); -} - -static void __init mx35_3ds_late_init(void) -{ - struct platform_device *imx35_fb_pdev; - - if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) - pr_warn("Init of the debugboard failed, all " - "devices on the debugboard are unusable.\n"); - - imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); - mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; - platform_device_register(&mx35_3ds_lcd); - - imx35_3ds_init_mc13892(); -} - -static void __init mx35pdk_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(MX35_3DS, "Freescale MX35PDK") - /* Maintainer: Freescale Semiconductor, Inc */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = mx35pdk_timer_init, - .init_machine = mx35_3ds_init, - .init_late = mx35_3ds_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c deleted file mode 100644 index 27a3678e0658..000000000000 --- a/arch/arm/mach-imx/mach-pca100.c +++ /dev/null @@ -1,426 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de) - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/property.h> -#include <linux/dma-mapping.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx27.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx27.h" -#include "ulpi.h" - -#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) -#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) -#define SPI1_SS0 (GPIO_PORTD + 28) -#define SPI1_SS1 (GPIO_PORTD + 27) -#define SD2_CD (GPIO_PORTC + 29) - -static const int pca100_pins[] __initconst = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* SDHC */ - PB4_PF_SD2_D0, - PB5_PF_SD2_D1, - PB6_PF_SD2_D2, - PB7_PF_SD2_D3, - PB8_PF_SD2_CMD, - PB9_PF_SD2_CLK, - SD2_CD | GPIO_GPIO | GPIO_IN, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* onboard I2C */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* external I2C */ - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - /* SPI1 */ - PD25_PF_CSPI1_RDY, - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* OTG */ - OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, - PC7_PF_USBOTG_DATA5, - PC8_PF_USBOTG_DATA6, - PC9_PF_USBOTG_DATA0, - PC10_PF_USBOTG_DATA2, - PC11_PF_USBOTG_DATA1, - PC12_PF_USBOTG_DATA4, - PC13_PF_USBOTG_DATA3, - PE0_PF_USBOTG_NXT, - PE1_PF_USBOTG_STP, - PE2_PF_USBOTG_DIR, - PE24_PF_USBOTG_CLK, - PE25_PF_USBOTG_DATA7, - /* USBH2 */ - USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, - PA0_PF_USBH2_CLK, - PA1_PF_USBH2_DIR, - PA2_PF_USBH2_DATA7, - PA3_PF_USBH2_NXT, - PA4_PF_USBH2_STP, - PD19_AF_USBH2_DATA4, - PD20_AF_USBH2_DATA3, - PD21_AF_USBH2_DATA6, - PD22_AF_USBH2_DATA0, - PD23_AF_USBH2_DATA2, - PD24_AF_USBH2_DATA1, - PD26_AF_USBH2_DATA5, - /* display */ - PA5_PF_LSCLK, - PA6_PF_LD0, - PA7_PF_LD1, - PA8_PF_LD2, - PA9_PF_LD3, - PA10_PF_LD4, - PA11_PF_LD5, - PA12_PF_LD6, - PA13_PF_LD7, - PA14_PF_LD8, - PA15_PF_LD9, - PA16_PF_LD10, - PA17_PF_LD11, - PA18_PF_LD12, - PA19_PF_LD13, - PA20_PF_LD14, - PA21_PF_LD15, - PA22_PF_LD16, - PA23_PF_LD17, - PA26_PF_PS, - PA28_PF_HSYNC, - PA29_PF_VSYNC, - PA31_PF_OE_ACD, - /* free GPIO */ - GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */ - GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */ - GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */ -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct mxc_nand_platform_data -pca100_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static const struct imxi2c_platform_data pca100_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static const struct property_entry board_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 32), - { } -}; - -static struct i2c_board_info pca100_i2c_devices[] = { - { - I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ - .properties = board_eeprom_properties, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("lm75", 0x4a), - } -}; - -static struct spi_eeprom at25320 = { - .name = "at25320an", - .byte_len = 4096, - .page_size = 32, - .flags = EE_ADDR2, -}; - -static struct spi_board_info pca100_spi_board_info[] __initdata = { - { - .modalias = "at25", - .max_speed_hz = 30000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &at25320, - }, -}; - -static struct gpiod_lookup_table pca100_spi0_gpiod_table = { - .dev_id = "imx27-cspi.0", /* Actual device name for spi0 */ - .table = { - /* - * The i.MX27 has the i.MX21 GPIO controller, port D is - * bank 3 and thus named "imx21-gpio.3". - * SPI1_SS0 is GPIO_PORTD + 28 - * SPI1_SS1 is GPIO_PORTD + 27 - */ - GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) -{ - mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); - gpio_set_value(GPIO_PORTC + 20, 1); - udelay(2); - gpio_set_value(GPIO_PORTC + 20, 0); - mxc_gpio_mode(PC20_PF_SSI1_FS); - msleep(2); -} - -static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) -{ - mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */ - gpio_set_value(GPIO_PORTC + 20, 0); - mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */ - gpio_set_value(GPIO_PORTC + 22, 0); - mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */ - gpio_set_value(GPIO_PORTC + 28, 0); - udelay(10); - gpio_set_value(GPIO_PORTC + 28, 1); - mxc_gpio_mode(PC20_PF_SSI1_FS); - mxc_gpio_mode(PC22_PF_SSI1_TXD); - msleep(2); -} - -static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { - .ac97_reset = pca100_ac97_cold_reset, - .ac97_warm_reset = pca100_ac97_warm_reset, - .flags = IMX_SSI_USE_AC97, -}; - -static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); - if (ret) - printk(KERN_ERR - "pca100: Failed to request irq for sd/mmc detection\n"); - - return ret; -} - -static void pca100_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { - .init = pca100_sdhc2_init, - .exit = pca100_sdhc2_exit, -}; - -static int otg_phy_init(struct platform_device *pdev) -{ - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = otg_phy_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int usbh2_phy_init(struct platform_device *pdev) -{ - gpio_set_value(USBH2_PHY_CS_GPIO, 0); - - mdelay(10); - - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = usbh2_phy_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init pca100_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", pca100_otg_mode); - -/* framebuffer info */ -static struct imx_fb_videomode pca100_fb_modes[] = { - { - .mode = { - .name = "EMERGING-ETV570G0DHU", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39722, /* in ps (25.175 MHz) */ - .hsync_len = 30, - .left_margin = 114, - .right_margin = 16, - .vsync_len = 3, - .upper_margin = 32, - .lower_margin = 0, - }, - /* - * TFT - * Pixel pol active high - * HSYNC active low - * VSYNC active low - * use HSYNC for ACD count - * line clock disable while idle - * always enable line clock even if no data - */ - .pcr = 0xf0c08080, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data pca100_fb_data __initconst = { - .mode = pca100_fb_modes, - .num_modes = ARRAY_SIZE(pca100_fb_modes), - - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static void __init pca100_init(void) -{ - int ret; - - imx27_soc_init(); - - ret = mxc_gpio_setup_multiple_pins(pca100_pins, - ARRAY_SIZE(pca100_pins), "PCA100"); - if (ret) - printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - - imx27_add_imx_uart0(&uart_pdata); - - imx27_add_mxc_nand(&pca100_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, pca100_i2c_devices, - ARRAY_SIZE(pca100_i2c_devices)); - - imx27_add_imx_i2c(1, &pca100_i2c1_data); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); - mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); - spi_register_board_info(pca100_spi_board_info, - ARRAY_SIZE(pca100_spi_board_info)); - imx27_add_spi_imx0(&pca100_spi0_gpiod_table); - - imx27_add_imx_fb(&pca100_fb_data); - - imx27_add_fec(NULL); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); -} - -static void __init pca100_late_init(void) -{ - imx27_add_imx_ssi(0, &pca100_ssi_pdata); - - imx27_add_mxc_mmc(1, &sdhc_pdata); - - gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); - gpio_direction_output(OTG_PHY_CS_GPIO, 1); - gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); - gpio_direction_output(USBH2_PHY_CS_GPIO, 1); - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - - if (otg_pdata.otg) - imx27_add_mxc_ehci_otg(&otg_pdata); - } else { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } - - usbh2_pdata.otg = imx_otg_ulpi_create( - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - if (usbh2_pdata.otg) - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); -} - -static void __init pca100_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -MACHINE_START(PCA100, "phyCARD-i.MX27") - .atag_offset = 0x100, - .map_io = mx27_map_io, - .init_early = imx27_init_early, - .init_irq = mx27_init_irq, - .init_machine = pca100_init, - .init_late = pca100_late_init, - .init_time = pca100_timer_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c deleted file mode 100644 index c7d23e9d4f8b..000000000000 --- a/arch/arm/mach-imx/mach-pcm037.c +++ /dev/null @@ -1,585 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/property.h> -#include <linux/delay.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/can/platform/sja1000.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/gfp.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "pcm037.h" -#include "ulpi.h" - -static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; - -static int __init pcm037_variant_setup(char *str) -{ - if (!strcmp("eet", str)) - pcm037_instance = PCM037_EET; - else if (strcmp("pcm970", str)) - pr_warn("Unknown pcm037 baseboard variant %s\n", str); - - return 1; -} - -/* Supported values: "pcm970" (default) and "eet" */ -__setup("pcm037_variant=", pcm037_variant_setup); - -enum pcm037_board_variant pcm037_variant(void) -{ - return pcm037_instance; -} - -/* UART1 with RTS/CTS handshake signals */ -static unsigned int pcm037_uart1_handshake_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, -}; - -/* UART1 without RTS/CTS handshake signals */ -static unsigned int pcm037_uart1_pins[] = { - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, -}; - -static unsigned int pcm037_pins[] = { - /* I2C */ - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, - MX31_PIN_CSPI2_SS2__I2C3_SDA, - MX31_PIN_CSPI2_SCLK__I2C3_SCL, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ - IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ - /* SPI1 */ - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* UART2 */ - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - /* UART3 */ - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, - /* LAN9217 irq pin */ - IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - /* Onewire */ - MX31_PIN_BATT_LINE__OWIRE, - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - MX31_PIN_D3_REV__D3_REV, - MX31_PIN_CONTRAST__CONTRAST, - MX31_PIN_D3_SPL__D3_SPL, - MX31_PIN_D3_CLS__D3_CLS, - MX31_PIN_LCS0__GPIO3_23, - /* GPIO */ - IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), - /* OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /* USB host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), -}; - -static struct physmap_flash_data pcm037_flash_data = { - .width = 2, -}; - -static struct resource pcm037_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm037_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm037_flash_data, - }, - .resource = &pcm037_flash_resource, - .num_resources = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource smsc911x_resources[] = { - { - .start = MX31_CS1_BASE_ADDR + 0x300, - .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY | - SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device pcm037_eth = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm037_sram_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -static const struct mxc_nand_platform_data -pcm037_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = { - .bitrate = 20000, -}; - -static const struct property_entry board_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 32), - { } -}; - -static struct i2c_board_info pcm037_i2c_devices[] = { - { - I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ - .properties = board_eeprom_properties, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - } -}; - -/* Not connected by default */ -#ifdef PCM970_SDHC_RW_SWITCH -static int pcm970_sdhc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); -} -#endif - -#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) -#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) - -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC1_GPIO_DET); - -#ifdef PCM970_SDHC_RW_SWITCH - ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC1_GPIO_WP); -#endif - - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, - IRQF_TRIGGER_FALLING, "sdhc-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: -#ifdef PCM970_SDHC_RW_SWITCH - gpio_free(SDHC1_GPIO_WP); -err_gpio_free: -#endif - gpio_free(SDHC1_GPIO_DET); - - return ret; -} - -static void pcm970_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data); - gpio_free(SDHC1_GPIO_DET); - gpio_free(SDHC1_GPIO_WP); -} - -static const struct imxmmc_platform_data sdhc_pdata __initconst = { -#ifdef PCM970_SDHC_RW_SWITCH - .get_ro = pcm970_sdhc1_get_ro, -#endif - .init = pcm970_sdhc1_init, - .exit = pcm970_sdhc1_exit, -}; - -static struct platform_device *devices[] __initdata = { - &pcm037_flash, - &pcm037_sram_device, -}; - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz Sharp */ - .name = "Sharp-LQ035Q7DH06-QVGA", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | - FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "CMEL-OLED", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .name = "Sharp-LQ035Q7DH06-QVGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct resource pcm970_sja1000_resources[] = { - { - .start = MX31_CS5_BASE_ADDR, - .end = MX31_CS5_BASE_ADDR + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct sja1000_platform_data pcm970_sja1000_platform_data = { - .osc_freq = 16000000, - .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, - .cdr = CDR_CBP, -}; - -static struct platform_device pcm970_sja1000 = { - .name = "sja1000_platform", - .dev = { - .platform_data = &pcm970_sja1000_platform_data, - }, - .resource = pcm970_sja1000_resources, - .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), -}; - -static int pcm037_otg_init(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = pcm037_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int pcm037_usbh2_init(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = pcm037_usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init pcm037_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", pcm037_otg_mode); - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -/* - * Board specific initialization. - */ -static void __init pcm037_init(void) -{ - imx31_soc_init(); - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - mxc_iomux_set_gpr(MUX_PGP_UH2, 1); - - mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), - "pcm037"); - -#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \ - | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ - mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ - mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ - mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ - mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ - mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ - mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ - - if (pcm037_variant() == PCM037_EET) - mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, - ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); - else - mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, - ARRAY_SIZE(pcm037_uart1_handshake_pins), - "pcm037_uart1"); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx31_add_imx2_wdt(); - imx31_add_imx_uart0(&uart_pdata); - /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); - - imx31_add_mxc_w1(); - - /* I2C adapters and devices */ - i2c_register_board_info(1, pcm037_i2c_devices, - ARRAY_SIZE(pcm037_i2c_devices)); - - imx31_add_imx_i2c1(&pcm037_i2c1_data); - imx31_add_imx_i2c2(&pcm037_i2c2_data); - - imx31_add_mxc_nand(&pcm037_nand_board_info); - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx31_add_mxc_ehci_otg(&otg_pdata); - } - - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - - if (!otg_mode_host) - imx31_add_fsl_usb2_udc(&otg_device_pdata); -} - -static void __init pcm037_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static void __init pcm037_init_late(void) -{ - int ret; - - /* LAN9217 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); - if (!ret) { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - platform_device_register(&pcm037_eth); - } else { - pr_warn("could not get LAN irq gpio\n"); - } - - imx31_add_mxc_mmc(0, &sdhc_pdata); - - pcm970_sja1000_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - pcm970_sja1000_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - platform_device_register(&pcm970_sja1000); - - pcm037_eet_init_devices(); -} - -MACHINE_START(PCM037, "Phytec Phycore pcm037") - /* Maintainer: Pengutronix */ - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = pcm037_timer_init, - .init_machine = pcm037_init, - .init_late = pcm037_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c deleted file mode 100644 index 8b0e03a595c1..000000000000 --- a/arch/arm/mach-imx/mach-pcm037_eet.c +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - */ -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> - -#include <asm/mach-types.h> - -#include "pcm037.h" -#include "common.h" -#include "devices-imx31.h" -#include "iomux-mx3.h" - -static unsigned int pcm037_eet_pins[] = { - /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ - IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), - /* GPIO keys */ - IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ - IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ - IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ - IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ - IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ - IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ - IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ - IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ - IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ - IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ - IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ - IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ - IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ - IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ - - /* LEDs */ - IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ - IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ - IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ - IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ -}; - -/* SPI */ -static struct spi_board_info pcm037_spi_dev[] = { - { - .modalias = "dac124s085", - .max_speed_hz = 400000, - .bus_num = 0, - .chip_select = 1, /* Index in pcm037_spi1_cs[] */ - .mode = SPI_CPHA, - }, -}; - -/* GPIO-keys input device */ -static struct gpio_keys_button pcm037_gpio_keys[] = { - { - .type = EV_KEY, - .code = KEY_L, - .gpio = 0, - .desc = "Wheel Manual", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_A, - .gpio = 1, - .desc = "Wheel AF", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_V, - .gpio = 2, - .desc = "Wheel View", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_M, - .gpio = 3, - .desc = "Wheel Menu", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_UP, - .gpio = 32, - .desc = "Nav Pad Up", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_RIGHT, - .gpio = 33, - .desc = "Nav Pad Right", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_DOWN, - .gpio = 34, - .desc = "Nav Pad Down", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_LEFT, - .gpio = 35, - .desc = "Nav Pad Left", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_ENTER, - .gpio = 38, - .desc = "Nav Pad Ok", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_O, - .gpio = 39, - .desc = "Wheel Off", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_FORWARD, - .gpio = 50, - .desc = "Focus Forward", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_BACK, - .gpio = 51, - .desc = "Focus Backward", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_MIDDLE, - .gpio = 52, - .desc = "Release Half", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_EXTRA, - .gpio = 53, - .desc = "Release Full", - .wakeup = 0, - }, -}; - -static const struct gpio_keys_platform_data - pcm037_gpio_keys_platform_data __initconst = { - .buttons = pcm037_gpio_keys, - .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), - .rep = 0, /* No auto-repeat */ -}; - -int __init pcm037_eet_init_devices(void) -{ - if (pcm037_variant() != PCM037_EET) - return 0; - - mxc_iomux_setup_multiple_pins(pcm037_eet_pins, - ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); - - /* SPI */ - spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); - imx31_add_spi_imx0(NULL); - - imx_add_gpio_keys(&pcm037_gpio_keys_platform_data); - - return 0; -} diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c deleted file mode 100644 index 017a50113005..000000000000 --- a/arch/arm/mach-imx/mach-pcm043.c +++ /dev/null @@ -1,412 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Sascha Hauer, Pengutronix - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/smc911x.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/property.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" -#include "ulpi.h" - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz */ - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Sharp-LQ035Q7", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data pcm043_flash_data = { - .width = 2, -}; - -static struct resource pcm043_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm043_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm043_flash_data, - }, - .resource = &pcm043_flash_resource, - .num_resources = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { - .bitrate = 50000, -}; - -static const struct property_entry board_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 32), - { } -}; - -static struct i2c_board_info pcm043_i2c_devices[] = { - { - I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */ - .properties = board_eeprom_properties, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static struct platform_device *devices[] __initdata = { - &pcm043_flash, -}; - -static const iomux_v3_cfg_t pcm043_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /* gpio */ - MX35_PAD_ATA_CS0__GPIO2_6, - /* USB host */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SSI */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* esdhc */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */ - MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */ -}; - -#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) -#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) -#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) - -static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) -{ - iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) { - printk("failed to get GPIO_TXFS: %d\n", ret); - return; - } - - mxc_iomux_v3_setup_pad(txfs_gpio); - - /* warm reset */ - gpio_direction_output(AC97_GPIO_TXFS, 1); - udelay(2); - gpio_set_value(AC97_GPIO_TXFS, 0); - - gpio_free(AC97_GPIO_TXFS); - mxc_iomux_v3_setup_pad(txfs); -} - -static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) -{ - iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28; - iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; - iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) - goto err1; - - ret = gpio_request(AC97_GPIO_TXD, "SSI"); - if (ret) - goto err2; - - ret = gpio_request(AC97_GPIO_RESET, "SSI"); - if (ret) - goto err3; - - mxc_iomux_v3_setup_pad(txfs_gpio); - mxc_iomux_v3_setup_pad(txd_gpio); - mxc_iomux_v3_setup_pad(reset_gpio); - - gpio_direction_output(AC97_GPIO_TXFS, 0); - gpio_direction_output(AC97_GPIO_TXD, 0); - - /* cold reset */ - gpio_direction_output(AC97_GPIO_RESET, 0); - udelay(10); - gpio_direction_output(AC97_GPIO_RESET, 1); - - mxc_iomux_v3_setup_pad(txd); - mxc_iomux_v3_setup_pad(txfs); - - gpio_free(AC97_GPIO_RESET); -err3: - gpio_free(AC97_GPIO_TXD); -err2: - gpio_free(AC97_GPIO_TXFS); -err1: - if (ret) - printk("%s failed with %d\n", __func__, ret); - mdelay(1); -} - -static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { - .ac97_reset = pcm043_ac97_cold_reset, - .ac97_warm_reset = pcm043_ac97_warm_reset, - .flags = IMX_SSI_USE_AC97, -}; - -static const struct mxc_nand_platform_data -pcm037_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static int pcm043_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = pcm043_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int pcm043_usbh1_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { - .init = pcm043_usbh1_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static bool otg_mode_host __initdata; - -static int __init pcm043_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", pcm043_otg_mode); - -static struct esdhc_platform_data sd1_pdata = { - .wp_type = ESDHC_WP_GPIO, - .cd_type = ESDHC_CD_GPIO, -}; - -static struct gpiod_lookup_table sd1_gpio_table = { - .dev_id = "sdhci-esdhc-imx35.0", - .table = { - /* Card detect: bank 2 offset 24 */ - GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW), - /* Write protect: bank 2 offset 23 */ - GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW), - { }, - }, -}; - -/* - * Board specific initialization. - */ -static void __init pcm043_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - - imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&pcm037_nand_board_info); - - imx35_add_imx_uart1(&uart_pdata); - - i2c_register_board_info(0, pcm043_i2c_devices, - ARRAY_SIZE(pcm043_i2c_devices)); - - imx35_add_imx_i2c0(&pcm043_i2c0_data); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx35_add_mxc_ehci_otg(&otg_pdata); - } - imx35_add_mxc_ehci_hs(&usbh1_pdata); - - if (!otg_mode_host) - imx35_add_fsl_usb2_udc(&otg_device_pdata); - - imx35_add_flexcan1(); -} - -static void __init pcm043_late_init(void) -{ - imx35_add_imx_ssi(0, &pcm043_ssi_pdata); - - gpiod_add_lookup_table(&sd1_gpio_table); - imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); -} - -static void __init pcm043_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(PCM043, "Phytec Phycore pcm043") - /* Maintainer: Pengutronix */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = pcm043_timer_init, - .init_machine = pcm043_init, - .init_late = pcm043_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c deleted file mode 100644 index 5b362da2dc09..000000000000 --- a/arch/arm/mach-imx/mach-qong.c +++ /dev/null @@ -1,262 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/memory.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/platnand.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <asm/page.h> -#include <asm/setup.h> - -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -/* FPGA defines */ -#define QONG_FPGA_VERSION(major, minor, rev) \ - (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) - -#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR -#define QONG_FPGA_PERIPH_SIZE (1 << 24) - -#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR -#define QONG_FPGA_CTRL_SIZE 0x10 -/* FPGA control registers */ -#define QONG_FPGA_CTRL_VERSION 0x00 - -#define QONG_DNET_ID 1 -#define QONG_DNET_BASEADDR \ - (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) -#define QONG_DNET_SIZE 0x00001000 - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 -}; - -static inline void __init mxc_init_imx_uart(void) -{ - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), - "uart-0"); - imx31_add_imx_uart0(&uart_pdata); -} - -static struct resource dnet_resources[] = { - { - .name = "dnet-memory", - .start = QONG_DNET_BASEADDR, - .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dnet_device = { - .name = "dnet", - .id = -1, - .num_resources = ARRAY_SIZE(dnet_resources), - .resource = dnet_resources, -}; - -static int __init qong_init_dnet(void) -{ - int ret; - - dnet_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); - dnet_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); - ret = platform_device_register(&dnet_device); - return ret; -} - -/* MTD NOR flash */ - -static struct physmap_flash_data qong_flash_data = { - .width = 2, -}; - -static struct resource qong_flash_resource = { - .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device qong_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &qong_flash_data, - }, - .resource = &qong_flash_resource, - .num_resources = 1, -}; - -static void qong_init_nor_mtd(void) -{ - (void)platform_device_register(&qong_nor_mtd_device); -} - -/* - * Hardware specific access to control-lines - */ -static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd, - unsigned int ctrl) -{ - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24)); - else - writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23)); -} - -/* - * Read the Device Ready pin. - */ -static int qong_nand_device_ready(struct nand_chip *chip) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); -} - -static void qong_nand_select_chip(struct nand_chip *chip, int cs) -{ - if (cs >= 0) - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); - else - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); -} - -static struct platform_nand_data qong_nand_data = { - .chip = { - .nr_chips = 1, - .chip_delay = 20, - .options = 0, - }, - .ctrl = { - .cmd_ctrl = qong_nand_cmd_ctrl, - .dev_ready = qong_nand_device_ready, - .select_chip = qong_nand_select_chip, - } -}; - -static struct resource qong_nand_resource = { - .start = MX31_CS3_BASE_ADDR, - .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device qong_nand_device = { - .name = "gen_nand", - .id = -1, - .dev = { - .platform_data = &qong_nand_data, - }, - .num_resources = 1, - .resource = &qong_nand_resource, -}; - -static void __init qong_init_nand_mtd(void) -{ - /* init CS */ - imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); - imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); - imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); - - mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); - - /* enable pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable")) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); - - /* ready/busy pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy")) - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB)); - - /* write protect pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp")) - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B)); - - platform_device_register(&qong_nand_device); -} - -static void __init qong_init_fpga(void) -{ - void __iomem *regs; - u32 fpga_ver; - - regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE); - if (!regs) { - printk(KERN_ERR "%s: failed to map registers, aborting.\n", - __func__); - return; - } - - fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION); - iounmap(regs); - printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", - (fpga_ver & 0xF000) >> 12, - (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF); - if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) { - printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " - "devices won't be registered!\n"); - return; - } - - /* register FPGA-based devices */ - qong_init_nand_mtd(); - qong_init_dnet(); -} - -/* - * Board specific initialization. - */ -static void __init qong_init(void) -{ - imx31_soc_init(); - - mxc_init_imx_uart(); - qong_init_nor_mtd(); - imx31_add_imx2_wdt(); -} - -static void __init qong_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") - /* Maintainer: DENX Software Engineering GmbH */ - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = qong_timer_init, - .init_machine = qong_init, - .init_late = qong_init_fpga, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c deleted file mode 100644 index fae5a41b5f6c..000000000000 --- a/arch/arm/mach-imx/mach-vpr200.c +++ /dev/null @@ -1,306 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix - * Copyright 2010 Creative Product Design - * - * Derived from mx35 3stack. - * Original author: Fabio Estevam <fabio.estevam@freescale.com> - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/memory.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include <linux/i2c.h> -#include <linux/mfd/mc13xxx.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx35.h" - -#define GPIO_LCDPWR IMX_GPIO_NR(1, 2) -#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) - -#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4) -#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5) -#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7) -#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8) -#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9) -#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10) -#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11) -#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12) - -static const struct fb_videomode fb_modedb[] = { - { - /* 800x480 @ 60 Hz */ - .name = "PT0708048", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = KHZ2PICOS(33260), - .left_margin = 50, - .right_margin = 156, - .upper_margin = 10, - .lower_margin = 10, - .hsync_len = 1, /* note: DE only display */ - .vsync_len = 1, /* note: DE only display */ - .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 800x480 @ 60 Hz */ - .name = "CTP-CLAA070LC0ACW", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = KHZ2PICOS(27000), - .left_margin = 50, - .right_margin = 50, /* whole line should have 900 clocks */ - .upper_margin = 10, - .lower_margin = 10, /* whole frame should have 500 lines */ - .hsync_len = 1, /* note: DE only display */ - .vsync_len = 1, /* note: DE only display */ - .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - } -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "PT0708048", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data vpr200_flash_data = { - .width = 2, -}; - -static struct resource vpr200_flash_resource = { - .start = MX35_CS0_BASE_ADDR, - .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device vpr200_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &vpr200_flash_data, - }, - .resource = &vpr200_flash_resource, - .num_resources = 1, -}; - -static const struct mxc_nand_platform_data - vpr200_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -#define VPR_KEY_DEBOUNCE 500 -static struct gpio_keys_button vpr200_gpio_keys_table[] = { - {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE}, - {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE}, - {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE}, - {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE}, - {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE}, - {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE}, - {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE}, - {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, -}; - -static const struct gpio_keys_platform_data - vpr200_gpio_keys_data __initconst = { - .buttons = vpr200_gpio_keys_table, - .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), -}; - -static struct mc13xxx_platform_data vpr200_pmic = { - .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, -}; - -static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = { - .bitrate = 50000, -}; - -static struct i2c_board_info vpr200_i2c_devices[] = { - { - I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */ - }, { - I2C_BOARD_INFO("mc13892", 0x08), - .platform_data = &vpr200_pmic, - /* irq number is run-time assigned */ - } -}; - -static const iomux_v3_cfg_t vpr200_pads[] __initconst = { - /* UART1 */ - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART3 */ - MX35_PAD_ATA_DATA10__UART3_RXD_MUX, - MX35_PAD_ATA_DATA11__UART3_TXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - /* LCD Enable */ - MX35_PAD_D3_VSYNC__GPIO1_2, - /* USBOTG */ - MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* PMIC */ - MX35_PAD_GPIO2_0__GPIO2_0, - /* GPIO keys */ - MX35_PAD_SCKR__GPIO1_4, - MX35_PAD_COMPARE__GPIO1_5, - MX35_PAD_SCKT__GPIO1_7, - MX35_PAD_FST__GPIO1_8, - MX35_PAD_HCKT__GPIO1_9, - MX35_PAD_TX5_RX0__GPIO1_10, - MX35_PAD_TX4_RX1__GPIO1_11, - MX35_PAD_TX3_RX2__GPIO1_12, -}; - -/* USB Device config */ -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static int vpr200_usbh_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, - MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); -} - -/* USB HOST config */ -static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .init = vpr200_usbh_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static struct platform_device *devices[] __initdata = { - &vpr200_flash, -}; - -/* - * Board specific initialization. - */ -static void __init vpr200_board_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(NULL); - imx35_add_imx_uart2(NULL); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_fsl_usb2_udc(&otg_device_pdata); - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - imx35_add_mxc_nand(&vpr200_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); -} - -static void __init vpr200_late_init(void) -{ - imx_add_gpio_keys(&vpr200_gpio_keys_data); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR")) - printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); - else - gpio_direction_output(GPIO_LCDPWR, 0); - - if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT")) - printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); - else - gpio_direction_input(GPIO_PMIC_INT); - - vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); - i2c_register_board_info(0, vpr200_i2c_devices, - ARRAY_SIZE(vpr200_i2c_devices)); - - imx35_add_imx_i2c0(&vpr200_i2c0_data); -} - -static void __init vpr200_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(VPR200, "VPR200") - /* Maintainer: Creative Product Design */ - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = vpr200_timer_init, - .init_machine = vpr200_board_init, - .init_late = vpr200_late_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c deleted file mode 100644 index b834026e4615..000000000000 --- a/arch/arm/mach-imx/mm-imx21.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-imx/mm-imx21.c - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/pinctrl/machine.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v1.h" - -/* MX21 memory map definition */ -static struct map_desc imx21_io_desc[] __initdata = { - /* - * this fixed mapping covers: - * - AIPI1 - * - AIPI2 - * - AITC - * - ROM Patch - * - and some reserved space - */ - imx_map_entry(MX21, AIPI, MT_DEVICE), - /* - * this fixed mapping covers: - * - CSI - * - ATA - */ - imx_map_entry(MX21, SAHB1, MT_DEVICE), - /* - * this fixed mapping covers: - * - EMI - */ - imx_map_entry(MX21, X_MEMC, MT_DEVICE), -}; - -/* - * Initialize the memory map. It is called during the - * system startup to create static physical to virtual - * memory map for the IO modules. - */ -void __init mx21_map_io(void) -{ - iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); -} - -void __init imx21_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX21); - imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR), - MX21_NUM_GPIO_PORT); -} - -void __init mx21_init_irq(void) -{ - mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); -} - -static const struct resource imx21_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K), -}; - -void __init imx21_soc_init(void) -{ - mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); - - pinctrl_provide_dummies(); - imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0); - platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, - ARRAY_SIZE(imx21_audmux_res)); -} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c deleted file mode 100644 index 2717614f101d..000000000000 --- a/arch/arm/mach-imx/mm-imx27.c +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-imx/mm-imx27.c - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/pinctrl/machine.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v1.h" - -/* MX27 memory map definition */ -static struct map_desc imx27_io_desc[] __initdata = { - /* - * this fixed mapping covers: - * - AIPI1 - * - AIPI2 - * - AITC - * - ROM Patch - * - and some reserved space - */ - imx_map_entry(MX27, AIPI, MT_DEVICE), - /* - * this fixed mapping covers: - * - CSI - * - ATA - */ - imx_map_entry(MX27, SAHB1, MT_DEVICE), - /* - * this fixed mapping covers: - * - EMI - */ - imx_map_entry(MX27, X_MEMC, MT_DEVICE), -}; - -/* - * Initialize the memory map. It is called during the - * system startup to create static physical to virtual - * memory map for the IO modules. - */ -void __init mx27_map_io(void) -{ - iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); -} - -void __init imx27_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX27); - imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR), - MX27_NUM_GPIO_PORT); -} - -void __init mx27_init_irq(void) -{ - mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); -} - -static const struct resource imx27_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), -}; - -void __init imx27_soc_init(void) -{ - mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); - mxc_device_init(); - - /* i.mx27 has the i.mx21 type gpio */ - mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); - - pinctrl_provide_dummies(); - imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0); - /* imx27 has the imx21 type audmux */ - platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, - ARRAY_SIZE(imx27_audmux_res)); - - imx27_pm_init(); -} diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index ea2d58a63903..5056438e5b42 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_address.h> #include <linux/pinctrl/machine.h> #include <asm/system_misc.h> @@ -19,9 +20,7 @@ #include "common.h" #include "crmregs-imx3.h" -#include "devices/devices-common.h" #include "hardware.h" -#include "iomux-v3.h" void __iomem *mx3_ccm_base; @@ -71,40 +70,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size, return __arm_ioremap_caller(phys_addr, size, mtype, caller); } -static void __init imx3_init_l2x0(void) -{ -#ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base; - void __iomem *clkctl_base; - -/* - * First of all, we must repair broken chip settings. There are some - * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These - * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. - * Workaraound is to setup the correct register setting prior enabling the - * L2 cache. This should not hurt already working CPUs, as they are using the - * same value. - */ -#define L2_MEM_VAL 0x10 - - clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); - if (clkctl_base != NULL) { - writel(0x00000515, clkctl_base + L2_MEM_VAL); - iounmap(clkctl_base); - } else { - pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); - } - - l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (!l2x0_base) { - printk(KERN_ERR "remapping L2 cache area failed\n"); - return; - } - - l2x0_init(l2x0_base, 0x00030024, 0x00000000); -#endif -} - #ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), @@ -135,70 +100,26 @@ static void imx31_idle(void) void __init imx31_init_early(void) { + struct device_node *np; + mxc_set_cpu_type(MXC_CPU_MX31); arch_ioremap_caller = imx3_ioremap_caller; arm_pm_idle = imx31_idle; - mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); + np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm"); + mx3_ccm_base = of_iomap(np, 0); + BUG_ON(!mx3_ccm_base); } void __init mx31_init_irq(void) { - mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); -} - -static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { - .per_2_per_addr = 1677, -}; - -static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { - .ap_2_ap_addr = 423, - .ap_2_bp_addr = 829, - .bp_2_ap_addr = 1029, -}; - -static struct sdma_platform_data imx31_sdma_pdata __initdata = { - .fw_name = "sdma-imx31-to2.bin", - .script_addrs = &imx31_to2_sdma_script, -}; - -static const struct resource imx31_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), -}; - -static const struct resource imx31_rnga_res[] __initconst = { - DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), -}; - -void __init imx31_soc_init(void) -{ - int to_version = mx31_revision() >> 4; + void __iomem *avic_base; + struct device_node *np; - imx3_init_l2x0(); + np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); - - pinctrl_provide_dummies(); - - if (to_version == 1) { - strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", - strlen(imx31_sdma_pdata.fw_name)); - imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; - } - - imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); - - imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR)); - imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR)); - - platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, - ARRAY_SIZE(imx31_audmux_res)); - platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, - ARRAY_SIZE(imx31_rnga_res)); + mxc_init_irq(avic_base); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -228,85 +149,25 @@ static void imx35_idle(void) void __init imx35_init_early(void) { + struct device_node *np; + mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); arm_pm_idle = imx35_idle; arch_ioremap_caller = imx3_ioremap_caller; - mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm"); + mx3_ccm_base = of_iomap(np, 0); + BUG_ON(!mx3_ccm_base); } void __init mx35_init_irq(void) { - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - -static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .uartsh_2_mcu_addr = 1183, - .per_2_shp_addr = 1033, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1333, - .mcu_2_ata_addr = 1252, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1111, - .shp_2_mcu_addr = 892, -}; - -static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1597, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1270, - .per_2_shp_addr = 1120, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1429, - .mcu_2_ata_addr = 1339, - .app_2_per_addr = 1531, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1198, - .shp_2_mcu_addr = 979, -}; - -static struct sdma_platform_data imx35_sdma_pdata __initdata = { - .fw_name = "sdma-imx35-to2.bin", - .script_addrs = &imx35_to2_sdma_script, -}; - -static const struct resource imx35_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K), -}; - -void __init imx35_soc_init(void) -{ - int to_version = mx35_revision() >> 4; - - imx3_init_l2x0(); - - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); - mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); - mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); - - pinctrl_provide_dummies(); - if (to_version == 1) { - strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", - strlen(imx35_sdma_pdata.fw_name)); - imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; - } - - imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + void __iomem *avic_base; + struct device_node *np; - /* Setup AIPS registers */ - imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR)); - imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR)); + np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); - /* i.mx35 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res, - ARRAY_SIZE(imx35_audmux_res)); + mxc_init_irq(avic_base); } #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/mx21.h b/arch/arm/mach-imx/mx21.h deleted file mode 100644 index 38be12a44bdd..000000000000 --- a/arch/arm/mach-imx/mx21.h +++ /dev/null @@ -1,176 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de - * - * This contains i.MX21-specific hardware definitions. For those - * hardware pieces that are common between i.MX21 and i.MX27, have a - * look at mx2x.h. - */ - -#ifndef __MACH_MX21_H__ -#define __MACH_MX21_H__ - -#define MX21_AIPI_BASE_ADDR 0x10000000 -#define MX21_AIPI_SIZE SZ_1M -#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000) -#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000) -#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000) -#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000) -#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000) -#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000) -#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000) -#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000) -#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000) -#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000) -#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000) -#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000) -#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000) -#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000) -#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000) -#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000) -#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000) -#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000) -#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000) -#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000) -#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000) -#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000) -#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100) -#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200) -#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300) -#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400) -#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500) -#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000) -#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000) -#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000) -#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000) -#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000) -#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000) -#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400) -#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000) -#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800) -#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000) -#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000) - -#define MX21_AVIC_BASE_ADDR 0x10040000 - -#define MX21_SAHB1_BASE_ADDR 0x80000000 -#define MX21_SAHB1_SIZE SZ_1M -#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) - -/* Memory regions and CS */ -#define MX21_SDRAM_BASE_ADDR 0xc0000000 -#define MX21_CSD1_BASE_ADDR 0xc4000000 - -#define MX21_CS0_BASE_ADDR 0xc8000000 -#define MX21_CS1_BASE_ADDR 0xcc000000 -#define MX21_CS2_BASE_ADDR 0xd0000000 -#define MX21_CS3_BASE_ADDR 0xd1000000 -#define MX21_CS4_BASE_ADDR 0xd2000000 -#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000 -#define MX21_CS5_BASE_ADDR 0xdd000000 - -/* NAND, SDRAM, WEIM etc controllers */ -#define MX21_X_MEMC_BASE_ADDR 0xdf000000 -#define MX21_X_MEMC_SIZE SZ_256K - -#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000) -#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000) -#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000) -#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000) - -#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */ - -#define MX21_IO_P2V(x) IMX_IO_P2V(x) -#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) - -/* fixed interrupt numbers */ -#include <asm/irq.h> -#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6) -#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8) -#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9) -#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10) -#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11) -#define MX21_INT_I2C (NR_IRQS_LEGACY + 12) -#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13) -#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14) -#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15) -#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16) -#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17) -#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19) -#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20) -#define MX21_INT_KPP (NR_IRQS_LEGACY + 21) -#define MX21_INT_RTC (NR_IRQS_LEGACY + 22) -#define MX21_INT_PWM (NR_IRQS_LEGACY + 23) -#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24) -#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25) -#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26) -#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27) -#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28) -#define MX21_INT_NFC (NR_IRQS_LEGACY + 29) -#define MX21_INT_BMI (NR_IRQS_LEGACY + 30) -#define MX21_INT_CSI (NR_IRQS_LEGACY + 31) -#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32) -#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33) -#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34) -#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35) -#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36) -#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37) -#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38) -#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39) -#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40) -#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41) -#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42) -#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43) -#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44) -#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45) -#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46) -#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47) -#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49) -#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50) -#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51) -#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52) -#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53) -#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54) -#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55) -#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56) -#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57) -#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58) -#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60) -#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61) - -/* fixed DMA request numbers */ -#define MX21_DMA_REQ_CSPI3_RX 1 -#define MX21_DMA_REQ_CSPI3_TX 2 -#define MX21_DMA_REQ_EXT 3 -#define MX21_DMA_REQ_FIRI_RX 4 -#define MX21_DMA_REQ_SDHC2 6 -#define MX21_DMA_REQ_SDHC1 7 -#define MX21_DMA_REQ_SSI2_RX0 8 -#define MX21_DMA_REQ_SSI2_TX0 9 -#define MX21_DMA_REQ_SSI2_RX1 10 -#define MX21_DMA_REQ_SSI2_TX1 11 -#define MX21_DMA_REQ_SSI1_RX0 12 -#define MX21_DMA_REQ_SSI1_TX0 13 -#define MX21_DMA_REQ_SSI1_RX1 14 -#define MX21_DMA_REQ_SSI1_TX1 15 -#define MX21_DMA_REQ_CSPI2_RX 16 -#define MX21_DMA_REQ_CSPI2_TX 17 -#define MX21_DMA_REQ_CSPI1_RX 18 -#define MX21_DMA_REQ_CSPI1_TX 19 -#define MX21_DMA_REQ_UART4_RX 20 -#define MX21_DMA_REQ_UART4_TX 21 -#define MX21_DMA_REQ_UART3_RX 22 -#define MX21_DMA_REQ_UART3_TX 23 -#define MX21_DMA_REQ_UART2_RX 24 -#define MX21_DMA_REQ_UART2_TX 25 -#define MX21_DMA_REQ_UART1_RX 26 -#define MX21_DMA_REQ_UART1_TX 27 -#define MX21_DMA_REQ_BMI_TX 28 -#define MX21_DMA_REQ_BMI_RX 29 -#define MX21_DMA_REQ_CSI_STAT 30 -#define MX21_DMA_REQ_CSI_RX 31 - -#endif /* ifndef __MACH_MX21_H__ */ diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index c6f7aae02b67..241c04d706fe 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -13,209 +13,13 @@ #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_SIZE SZ_1M -#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) -#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000) -#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000) -#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000) -#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000) -#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000) -#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000) -#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000) -#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000) -#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000) -#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000) -#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000) -#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000) -#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000) -#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) -#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) -#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) -#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) -#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) -#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) -#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) -#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000) -#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100) -#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200) -#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300) -#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400) -#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500) -#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000) -#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000) -#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000) -#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000) -#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000) -#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000) -#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000) -#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000) -#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000) -#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000) -#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000) -#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000) -#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000) -#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000) -#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000) -#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200) -#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400) -#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000) -#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000) -#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400) -#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000) -#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800) -#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000) -#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000) -#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000) -#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000) -#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000) -#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000) -#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000) -#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000) - -#define MX27_AVIC_BASE_ADDR 0x10040000 - -/* ROM patch */ -#define MX27_ROMP_BASE_ADDR 0x10041000 #define MX27_SAHB1_BASE_ADDR 0x80000000 #define MX27_SAHB1_SIZE SZ_1M -#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000) -#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000) - -/* Memory regions and CS */ -#define MX27_SDRAM_BASE_ADDR 0xa0000000 -#define MX27_CSD1_BASE_ADDR 0xb0000000 -#define MX27_CS0_BASE_ADDR 0xc0000000 -#define MX27_CS1_BASE_ADDR 0xc8000000 -#define MX27_CS2_BASE_ADDR 0xd0000000 -#define MX27_CS3_BASE_ADDR 0xd2000000 -#define MX27_CS4_BASE_ADDR 0xd4000000 -#define MX27_CS5_BASE_ADDR 0xd6000000 - -/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define MX27_X_MEMC_BASE_ADDR 0xd8000000 #define MX27_X_MEMC_SIZE SZ_1M -#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR) -#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000) -#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000) -#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000) -#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000) - -#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10) -#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs)) -#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) -#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) - -#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000 - -/* IRAM */ -#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */ #define MX27_IO_P2V(x) IMX_IO_P2V(x) -#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) - -/* fixed interrupt numbers */ -#include <asm/irq.h> -#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1) -#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2) -#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3) -#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) -#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) -#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) -#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7) -#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) -#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) -#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) -#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11) -#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12) -#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13) -#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14) -#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15) -#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16) -#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17) -#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19) -#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20) -#define MX27_INT_KPP (NR_IRQS_LEGACY + 21) -#define MX27_INT_RTC (NR_IRQS_LEGACY + 22) -#define MX27_INT_PWM (NR_IRQS_LEGACY + 23) -#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24) -#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25) -#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26) -#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27) -#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28) -#define MX27_INT_NFC (NR_IRQS_LEGACY + 29) -#define MX27_INT_ATA (NR_IRQS_LEGACY + 30) -#define MX27_INT_CSI (NR_IRQS_LEGACY + 31) -#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32) -#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33) -#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34) -#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35) -#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36) -#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37) -#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38) -#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39) -#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40) -#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41) -#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42) -#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43) -#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44) -#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45) -#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46) -#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47) -#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48) -#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49) -#define MX27_INT_FEC (NR_IRQS_LEGACY + 50) -#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51) -#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52) -#define MX27_INT_VPU (NR_IRQS_LEGACY + 53) -#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54) -#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55) -#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56) -#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57) -#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58) -#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59) -#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60) -#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61) -#define MX27_INT_IIM (NR_IRQS_LEGACY + 62) -#define MX27_INT_CCM (NR_IRQS_LEGACY + 63) - -/* fixed DMA request numbers */ -#define MX27_DMA_REQ_CSPI3_RX 1 -#define MX27_DMA_REQ_CSPI3_TX 2 -#define MX27_DMA_REQ_EXT 3 -#define MX27_DMA_REQ_MSHC 4 -#define MX27_DMA_REQ_SDHC2 6 -#define MX27_DMA_REQ_SDHC1 7 -#define MX27_DMA_REQ_SSI2_RX0 8 -#define MX27_DMA_REQ_SSI2_TX0 9 -#define MX27_DMA_REQ_SSI2_RX1 10 -#define MX27_DMA_REQ_SSI2_TX1 11 -#define MX27_DMA_REQ_SSI1_RX0 12 -#define MX27_DMA_REQ_SSI1_TX0 13 -#define MX27_DMA_REQ_SSI1_RX1 14 -#define MX27_DMA_REQ_SSI1_TX1 15 -#define MX27_DMA_REQ_CSPI2_RX 16 -#define MX27_DMA_REQ_CSPI2_TX 17 -#define MX27_DMA_REQ_CSPI1_RX 18 -#define MX27_DMA_REQ_CSPI1_TX 19 -#define MX27_DMA_REQ_UART4_RX 20 -#define MX27_DMA_REQ_UART4_TX 21 -#define MX27_DMA_REQ_UART3_RX 22 -#define MX27_DMA_REQ_UART3_TX 23 -#define MX27_DMA_REQ_UART2_RX 24 -#define MX27_DMA_REQ_UART2_TX 25 -#define MX27_DMA_REQ_UART1_RX 26 -#define MX27_DMA_REQ_UART1_TX 27 -#define MX27_DMA_REQ_ATA_TX 28 -#define MX27_DMA_REQ_ATA_RCV 29 -#define MX27_DMA_REQ_CSI_STAT 30 -#define MX27_DMA_REQ_CSI_RX 31 -#define MX27_DMA_REQ_UART5_TX 32 -#define MX27_DMA_REQ_UART5_RX 33 -#define MX27_DMA_REQ_UART6_TX 34 -#define MX27_DMA_REQ_UART6_RX 35 -#define MX27_DMA_REQ_SDHC3 36 -#define MX27_DMA_REQ_NFC 37 #endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/mach-imx/mx31.h b/arch/arm/mach-imx/mx31.h index d9574671ca5c..08a72e25c289 100644 --- a/arch/arm/mach-imx/mx31.h +++ b/arch/arm/mach-imx/mx31.h @@ -2,196 +2,17 @@ #ifndef __MACH_MX31_H__ #define __MACH_MX31_H__ -/* - * IRAM - */ -#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */ -#define MX31_IRAM_SIZE SZ_16K - -#define MX31_L2CC_BASE_ADDR 0x30000000 -#define MX31_L2CC_SIZE SZ_1M - #define MX31_AIPS1_BASE_ADDR 0x43f00000 #define MX31_AIPS1_SIZE SZ_1M -#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000) -#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000) -#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000) -#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) -#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) -#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) -#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) -#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) -#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) -#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000) -#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200) -#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400) -#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) -#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000) -#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000) -#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000) -#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000) -#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000) -#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000) -#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000) -#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000) -#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000) -#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000) -#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000) -#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000) - #define MX31_SPBA0_BASE_ADDR 0x50000000 #define MX31_SPBA0_SIZE SZ_1M -#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000) -#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000) -#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000) -#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000) -#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000) -#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000) -#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000) -#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000) -#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000) -#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000) - #define MX31_AIPS2_BASE_ADDR 0x53f00000 #define MX31_AIPS2_SIZE SZ_1M -#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000) -#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000) -#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000) -#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000) -#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000) -#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000) -#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000) -#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000) -#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000) -#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000) -#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000) -#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000) -#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000) -#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000) -#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000) -#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000) -#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000) -#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000) -#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000) -#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000) -#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000) - -#define MX31_ROMP_BASE_ADDR 0x60000000 -#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000) -#define MX31_ROMP_SIZE SZ_1M - #define MX31_AVIC_BASE_ADDR 0x68000000 #define MX31_AVIC_SIZE SZ_1M - -#define MX31_IPU_MEM_BASE_ADDR 0x70000000 -#define MX31_CSD0_BASE_ADDR 0x80000000 -#define MX31_CSD1_BASE_ADDR 0x90000000 - -#define MX31_CS0_BASE_ADDR 0xa0000000 -#define MX31_CS1_BASE_ADDR 0xa8000000 -#define MX31_CS2_BASE_ADDR 0xb0000000 -#define MX31_CS3_BASE_ADDR 0xb2000000 - -#define MX31_CS4_BASE_ADDR 0xb4000000 -#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000) -#define MX31_CS4_SIZE SZ_32M - -#define MX31_CS5_BASE_ADDR 0xb6000000 -#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000) -#define MX31_CS5_SIZE SZ_32M - #define MX31_X_MEMC_BASE_ADDR 0xb8000000 #define MX31_X_MEMC_SIZE SZ_64K -#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000) -#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000) -#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000) -#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000) -#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000) -#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR - -#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10) -#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs)) -#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4) -#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8) - -#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000 #define MX31_IO_P2V(x) IMX_IO_P2V(x) -#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#include <asm/irq.h> -#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3) -#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4) -#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5) -#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6) -#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7) -#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8) -#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9) -#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10) -#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11) -#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12) -#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13) -#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14) -#define MX31_INT_ATA (NR_IRQS_LEGACY + 15) -#define MX31_INT_MBX (NR_IRQS_LEGACY + 16) -#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17) -#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX31_INT_IIM (NR_IRQS_LEGACY + 19) -#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20) -#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21) -#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22) -#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23) -#define MX31_INT_KPP (NR_IRQS_LEGACY + 24) -#define MX31_INT_RTC (NR_IRQS_LEGACY + 25) -#define MX31_INT_PWM (NR_IRQS_LEGACY + 26) -#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27) -#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28) -#define MX31_INT_GPT (NR_IRQS_LEGACY + 29) -#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) -#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31) -#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32) -#define MX31_INT_NFC (NR_IRQS_LEGACY + 33) -#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34) -#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35) -#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36) -#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37) -#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39) -#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40) -#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41) -#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42) -#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45) -#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46) -#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47) -#define MX31_INT_ECT (NR_IRQS_LEGACY + 48) -#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49) -#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50) -#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51) -#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52) -#define MX31_INT_CCM (NR_IRQS_LEGACY + 53) -#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54) -#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55) -#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56) -#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58) -#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) -#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) -#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) -#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) -#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63) - -#define MX31_DMA_REQ_SDHC1 20 -#define MX31_DMA_REQ_SDHC2 21 -#define MX31_DMA_REQ_SSI2_RX1 22 -#define MX31_DMA_REQ_SSI2_TX1 23 -#define MX31_DMA_REQ_SSI2_RX0 24 -#define MX31_DMA_REQ_SSI2_TX0 25 -#define MX31_DMA_REQ_SSI1_RX1 26 -#define MX31_DMA_REQ_SSI1_TX1 27 -#define MX31_DMA_REQ_SSI1_RX0 28 -#define MX31_DMA_REQ_SSI1_TX0 29 - -#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ #endif /* ifndef __MACH_MX31_H__ */ diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c deleted file mode 100644 index 00a5ee30d5dd..000000000000 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ /dev/null @@ -1,182 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * LILLY-1131 development board support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "board-mx31lilly.h" -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -/* - * This file contains board-specific initialization routines for the - * LILLY-1131 development board. If you design an own baseboard for the - * module, use this file as base for support code. - */ - -static unsigned int lilly_db_board_pins[] __initdata = { - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - MX31_PIN_CONTRAST__CONTRAST, -}; - -/* MMC support */ - -static int mxc_mmc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); -} - -static int gpio_det, gpio_wp; - -#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int mxc_mmc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); - - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); - - ret = gpio_request(gpio_det, "MMC detect"); - if (ret) - return ret; - - ret = gpio_request(gpio_wp, "MMC w/p"); - if (ret) - goto exit_free_det; - - gpio_direction_input(gpio_det); - gpio_direction_input(gpio_wp); - - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), - detect_irq, IRQF_TRIGGER_FALLING, - "MMC detect", data); - if (ret) - goto exit_free_wp; - - return 0; - -exit_free_wp: - gpio_free(gpio_wp); - -exit_free_det: - gpio_free(gpio_det); - - return ret; -} - -static void mxc_mmc1_exit(struct device *dev, void *data) -{ - gpio_free(gpio_det); - gpio_free(gpio_wp); - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data); -} - -static const struct imxmmc_platform_data mmc_pdata __initconst = { - .get_ro = mxc_mmc1_get_ro, - .init = mxc_mmc1_init, - .exit = mxc_mmc1_exit, -}; - -/* Framebuffer support */ -static const struct fb_videomode fb_modedb = { - /* 640x480 TFT panel (IPS-056T) */ - .name = "CRT-VGA", - .refresh = 64, - .xres = 640, - .yres = 480, - .pixclock = 30000, - .left_margin = 200, - .right_margin = 2, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 3, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, -}; - -static struct mx3fb_platform_data fb_pdata __initdata = { - .name = "CRT-VGA", - .mode = &fb_modedb, - .num_modes = 1, -}; - -#define LCD_VCC_EN_GPIO (7) - -static void __init mx31lilly_init_fb(void) -{ - if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { - printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); - return; - } - - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&fb_pdata); - gpio_direction_output(LCD_VCC_EN_GPIO, 1); -} - -void __init mx31lilly_db_init(void) -{ - mxc_iomux_setup_multiple_pins(lilly_db_board_pins, - ARRAY_SIZE(lilly_db_board_pins), - "development board pins"); - imx31_add_mxc_mmc(0, &mmc_pdata); - mx31lilly_init_fb(); -} diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c deleted file mode 100644 index 13da7325c32b..000000000000 --- a/arch/arm/mach-imx/mx31lite-db.c +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * LogicPD i.MX31 SOM-LV development board support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "board-mx31lite.h" -#include "common.h" -#include "devices-imx31.h" -#include "hardware.h" -#include "iomux-mx3.h" - -/* - * This file contains board-specific initialization routines for the - * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'. - * If you design an own baseboard for the module, use this file as base - * for support code. - */ - -static unsigned int litekit_db_board_pins[] __initdata = { - /* SDHC1 */ - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; - -/* MMC */ - -static int gpio_det, gpio_wp; - -#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS) - -static int mxc_mmc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6)); -} - -static int mxc_mmc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); - - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - - ret = gpio_request(gpio_det, "MMC detect"); - if (ret) - return ret; - - ret = gpio_request(gpio_wp, "MMC w/p"); - if (ret) - goto exit_free_det; - - gpio_direction_input(gpio_det); - gpio_direction_input(gpio_wp); - - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), - detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC detect", data); - if (ret) - goto exit_free_wp; - - return 0; - -exit_free_wp: - gpio_free(gpio_wp); - -exit_free_det: - gpio_free(gpio_det); - - return ret; -} - -static void mxc_mmc1_exit(struct device *dev, void *data) -{ - gpio_free(gpio_det); - gpio_free(gpio_wp); - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data); -} - -static const struct imxmmc_platform_data mmc_pdata __initconst = { - .get_ro = mxc_mmc1_get_ro, - .init = mxc_mmc1_init, - .exit = mxc_mmc1_exit, -}; - -/* GPIO LEDs */ - -static const struct gpio_led litekit_leds[] __initconst = { - { - .name = "GPIO0", - .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "GPIO1", - .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE), - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static const struct gpio_led_platform_data - litekit_led_platform_data __initconst = { - .leds = litekit_leds, - .num_leds = ARRAY_SIZE(litekit_leds), -}; - -void __init mx31lite_db_init(void) -{ - mxc_iomux_setup_multiple_pins(litekit_db_board_pins, - ARRAY_SIZE(litekit_db_board_pins), - "development board pins"); - imx31_add_mxc_mmc(0, &mmc_pdata); - gpio_led_register_device(-1, &litekit_led_platform_data); - imx31_add_imx2_wdt(); - imx31_add_mxc_rtc(); -} diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c deleted file mode 100644 index 6a9db0663a80..000000000000 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> - -#include <linux/usb/otg.h> - -#include "board-mx31moboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static unsigned int devboard_pins[] = { - /* UART1 */ - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, - /* SDHC2 */ - MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, - MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, - MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, - MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* USB H1 */ - MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, - MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) -#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) - -static int devboard_sdhc2_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC2_WP); -} - -static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC2_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC2_CD); - - ret = gpio_request(SDHC2_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC2_WP); - - ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc2-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC2_WP); -err_gpio_free: - gpio_free(SDHC2_CD); - - return ret; -} - -static void devboard_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC2_CD), data); - gpio_free(SDHC2_WP); - gpio_free(SDHC2_CD); -} - -static const struct imxmmc_platform_data sdhc2_pdata __initconst = { - .get_ro = devboard_sdhc2_get_ro, - .init = devboard_sdhc2_init, - .exit = devboard_sdhc2_exit, -}; - -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void devboard_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int devboard_usbh1_hw_init(struct platform_device *pdev) -{ - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_SINGLE_UNI); -} - -#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) -#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) - -static int devboard_isp1105_init(struct usb_phy *otg) -{ - int ret = gpio_request(USBH1_MODE, "usbh1-mode"); - if (ret) - return ret; - /* single ended */ - gpio_direction_output(USBH1_MODE, 0); - - ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); - if (ret) { - gpio_free(USBH1_MODE); - return ret; - } - gpio_direction_output(USBH1_VBUSEN_B, 1); - - return 0; -} - - -static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on) -{ - if (on) - gpio_set_value(USBH1_VBUSEN_B, 0); - else - gpio_set_value(USBH1_VBUSEN_B, 1); - - return 0; -} - -static struct mxc_usbh_platform_data usbh1_pdata __initdata = { - .init = devboard_usbh1_hw_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, -}; - -static int __init devboard_usbh1_init(void) -{ - struct usb_phy *phy; - struct platform_device *pdev; - - phy = kzalloc(sizeof(*phy), GFP_KERNEL); - if (!phy) - return -ENOMEM; - - phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); - if (!phy->otg) { - kfree(phy); - return -ENOMEM; - } - - phy->label = "ISP1105"; - phy->init = devboard_isp1105_init; - phy->otg->set_vbus = devboard_isp1105_set_vbus; - - usbh1_pdata.otg = phy; - - pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); - - return PTR_ERR_OR_ZERO(pdev); -} - - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_devboard_init(void) -{ - printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - - mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), - "devboard"); - - imx31_add_imx_uart1(&uart_pdata); - - imx31_add_mxc_mmc(1, &sdhc2_pdata); - - devboard_init_sel_gpios(); - - imx31_add_fsl_usb2_udc(&usb_pdata); - - devboard_usbh1_init(); -} diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c deleted file mode 100644 index c2690008e6fc..000000000000 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ /dev/null @@ -1,270 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/types.h> - -#include <linux/usb/otg.h> - -#include "board-mx31moboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static unsigned int marxbot_pins[] = { - /* SDHC2 */ - MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, - MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, - MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, - MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* dsPIC resets */ - MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, - /*battery detection */ - MX31_PIN_LCS0__GPIO3_23, - /* USB H1 */ - MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, - MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) -#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) - -static int marxbot_sdhc2_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC2_WP); -} - -static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC2_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC2_CD); - - ret = gpio_request(SDHC2_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC2_WP); - - ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc2-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC2_WP); -err_gpio_free: - gpio_free(SDHC2_CD); - - return ret; -} - -static void marxbot_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC2_CD), data); - gpio_free(SDHC2_WP); - gpio_free(SDHC2_CD); -} - -static const struct imxmmc_platform_data sdhc2_pdata __initconst = { - .get_ro = marxbot_sdhc2_get_ro, - .init = marxbot_sdhc2_init, - .exit = marxbot_sdhc2_exit, -}; - -#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5) -#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5) - -static void dspics_resets_init(void) -{ - if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 0); - gpio_export(TRSLAT_RST_B, false); - } - - if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { - gpio_direction_output(DSPICS_RST_B, 0); - gpio_export(DSPICS_RST_B, false); - } -} - -static struct spi_board_info marxbot_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 300000, - .bus_num = 1, - .chip_select = 1, /* according spi1_cs[] ! */ - }, -}; - -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void marxbot_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int marxbot_usbh1_hw_init(struct platform_device *pdev) -{ - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_INTERFACE_SINGLE_UNI); -} - -#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) -#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) - -static int marxbot_isp1105_init(struct usb_phy *otg) -{ - int ret = gpio_request(USBH1_MODE, "usbh1-mode"); - if (ret) - return ret; - /* single ended */ - gpio_direction_output(USBH1_MODE, 0); - - ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); - if (ret) { - gpio_free(USBH1_MODE); - return ret; - } - gpio_direction_output(USBH1_VBUSEN_B, 1); - - return 0; -} - - -static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on) -{ - if (on) - gpio_set_value(USBH1_VBUSEN_B, 0); - else - gpio_set_value(USBH1_VBUSEN_B, 1); - - return 0; -} - -static struct mxc_usbh_platform_data usbh1_pdata __initdata = { - .init = marxbot_usbh1_hw_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, -}; - -static int __init marxbot_usbh1_init(void) -{ - struct usb_phy *phy; - struct platform_device *pdev; - - phy = kzalloc(sizeof(*phy), GFP_KERNEL); - if (!phy) - return -ENOMEM; - - phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); - if (!phy->otg) { - kfree(phy); - return -ENOMEM; - } - - phy->label = "ISP1105"; - phy->init = marxbot_isp1105_init; - phy->otg->set_vbus = marxbot_isp1105_set_vbus; - - usbh1_pdata.otg = phy; - - pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata); - - return PTR_ERR_OR_ZERO(pdev); -} - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_marxbot_init(void) -{ - printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); - - mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), - "marxbot"); - - marxbot_init_sel_gpios(); - - dspics_resets_init(); - - imx31_add_mxc_mmc(1, &sdhc2_pdata); - - spi_register_board_info(marxbot_spi_board_info, - ARRAY_SIZE(marxbot_spi_board_info)); - - /* battery present pin */ - gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); - gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); - - imx31_add_fsl_usb2_udc(&usb_pdata); - - marxbot_usbh1_init(); -} diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c deleted file mode 100644 index d165bd952bad..000000000000 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/platform_device.h> -#include <linux/types.h> - -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include "board-mx31moboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static unsigned int smartbot_pins[] = { - /* UART1 */ - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, - /* ENABLES */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -#if defined(CONFIG_USB_ULPI) - -static int smartbot_otg_init(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static struct mxc_usbh_platform_data otg_host_pdata __initdata = { - .init = smartbot_otg_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, -}; - -static int __init smartbot_otg_host_init(void) -{ - struct platform_device *pdev; - - otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (!otg_host_pdata.otg) - return -ENODEV; - - pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata); - - return PTR_ERR_OR_ZERO(pdev); -} -#else -static inline int smartbot_otg_host_init(void) { return 0; } -#endif - -#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void smartbot_resets_init(void) -{ - if (!gpio_request(POWER_EN, "power-enable")) { - gpio_direction_output(POWER_EN, 0); - gpio_export(POWER_EN, false); - } - - if (!gpio_request(DSPIC_RST_B, "dspic-rst")) { - gpio_direction_output(DSPIC_RST_B, 0); - gpio_export(DSPIC_RST_B, false); - } - - if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 0); - gpio_export(TRSLAT_RST_B, false); - } - - if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) { - gpio_direction_output(TRSLAT_SRC_CHOICE, 0); - gpio_export(TRSLAT_SRC_CHOICE, false); - } -} -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_smartbot_init(int board) -{ - printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); - - mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), - "smartbot"); - - imx31_add_imx_uart1(&uart_pdata); - - switch (board) { - case MX31SMARTBOT: - imx31_add_fsl_usb2_udc(&usb_pdata); - break; - case MX31EYEBOT: - smartbot_otg_host_init(); - break; - default: - printk(KERN_WARNING "Unknown board %d, USB OTG not initialized", - board); - } - - smartbot_resets_init(); -} diff --git a/arch/arm/mach-imx/mx35.h b/arch/arm/mach-imx/mx35.h index 760de6a0af7e..5a8a87a85c14 100644 --- a/arch/arm/mach-imx/mx35.h +++ b/arch/arm/mach-imx/mx35.h @@ -2,190 +2,17 @@ #ifndef __MACH_MX35_H__ #define __MACH_MX35_H__ -/* - * IRAM - */ -#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ -#define MX35_IRAM_SIZE SZ_128K - -#define MX35_L2CC_BASE_ADDR 0x30000000 -#define MX35_L2CC_SIZE SZ_1M - #define MX35_AIPS1_BASE_ADDR 0x43f00000 #define MX35_AIPS1_SIZE SZ_1M -#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000) -#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000) -#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000) -#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) -#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) -#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) -#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) -#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) -#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) -#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) -#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000) -#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000) -#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000) -#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000) -#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000) -#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000) -#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000) -#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000) - #define MX35_SPBA0_BASE_ADDR 0x50000000 #define MX35_SPBA0_SIZE SZ_1M -#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000) -#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000) -#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000) -#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000) -#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000) -#define MX35_FEC_BASE_ADDR 0x50038000 -#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000) - #define MX35_AIPS2_BASE_ADDR 0x53f00000 #define MX35_AIPS2_SIZE SZ_1M -#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000) -#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000) -#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000) -#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000) -#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) -#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) -#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) -#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) -#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) -#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) -#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) -#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) -#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) -#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000) -#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000) -#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) -#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) -#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) -#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) -#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) -#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) -#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) -#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000) -#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000) -/* - * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for - * HS. When host support was implemented only a preliminary document was - * available, which told 0x400. This works fine. - */ -#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400) - -#define MX35_ROMP_BASE_ADDR 0x60000000 -#define MX35_ROMP_SIZE SZ_1M - #define MX35_AVIC_BASE_ADDR 0x68000000 #define MX35_AVIC_SIZE SZ_1M - -/* - * Memory regions and CS - */ -#define MX35_IPU_MEM_BASE_ADDR 0x70000000 -#define MX35_CSD0_BASE_ADDR 0x80000000 -#define MX35_CSD1_BASE_ADDR 0x90000000 - -#define MX35_CS0_BASE_ADDR 0xa0000000 -#define MX35_CS1_BASE_ADDR 0xa8000000 -#define MX35_CS2_BASE_ADDR 0xb0000000 -#define MX35_CS3_BASE_ADDR 0xb2000000 - -#define MX35_CS4_BASE_ADDR 0xb4000000 -#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000 -#define MX35_CS4_SIZE SZ_32M - -#define MX35_CS5_BASE_ADDR 0xb6000000 -#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000 -#define MX35_CS5_SIZE SZ_32M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ #define MX35_X_MEMC_BASE_ADDR 0xb8000000 #define MX35_X_MEMC_SIZE SZ_64K -#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000) -#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000) -#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000) -#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000) -#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR - -#define MX35_NFC_BASE_ADDR 0xbb000000 -#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000 #define MX35_IO_P2V(x) IMX_IO_P2V(x) -#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#include <asm/irq.h> -#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2) -#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3) -#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4) -#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6) -#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7) -#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8) -#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9) -#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10) -#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11) -#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12) -#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13) -#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14) -#define MX35_INT_ATA (NR_IRQS_LEGACY + 15) -#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16) -#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17) -#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX35_INT_IIM (NR_IRQS_LEGACY + 19) -#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22) -#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23) -#define MX35_INT_KPP (NR_IRQS_LEGACY + 24) -#define MX35_INT_RTC (NR_IRQS_LEGACY + 25) -#define MX35_INT_PWM (NR_IRQS_LEGACY + 26) -#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27) -#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28) -#define MX35_INT_GPT (NR_IRQS_LEGACY + 29) -#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) -#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32) -#define MX35_INT_NFC (NR_IRQS_LEGACY + 33) -#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34) -#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35) -#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37) -#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39) -#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40) -#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41) -#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42) -#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43) -#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44) -#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45) -#define MX35_INT_MLB (NR_IRQS_LEGACY + 46) -#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47) -#define MX35_INT_ECT (NR_IRQS_LEGACY + 48) -#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49) -#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50) -#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51) -#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52) -#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55) -#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56) -#define MX35_INT_FEC (NR_IRQS_LEGACY + 57) -#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58) -#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) -#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) -#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) -#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) -#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63) - -#define MX35_DMA_REQ_SSI2_RX1 22 -#define MX35_DMA_REQ_SSI2_TX1 23 -#define MX35_DMA_REQ_SSI2_RX0 24 -#define MX35_DMA_REQ_SSI2_TX0 25 -#define MX35_DMA_REQ_SSI1_RX1 26 -#define MX35_DMA_REQ_SSI1_TX1 27 -#define MX35_DMA_REQ_SSI1_RX0 28 -#define MX35_DMA_REQ_SSI1_TX0 29 - -#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ #endif /* ifndef __MACH_MX35_H__ */ diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h deleted file mode 100644 index 470d3c887e14..000000000000 --- a/arch/arm/mach-imx/pcm037.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __PCM037_H__ -#define __PCM037_H__ - -enum pcm037_board_variant { - PCM037_PCM970, - PCM037_EET, -}; - -extern enum pcm037_board_variant pcm037_variant(void); - -#ifdef CONFIG_MACH_PCM037_EET -int pcm037_eet_init_devices(void); -#else -static inline int pcm037_eet_init_devices(void) { return 0; } -#endif - -#endif diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index d943535566c8..020e6deb67c8 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -7,6 +7,7 @@ * modify it under the terms of the GNU General Public License. */ +#include <linux/of_address.h> #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> @@ -15,13 +16,20 @@ static int mx27_suspend_enter(suspend_state_t state) { + void __iomem *ccm_base; + struct device_node *np; u32 cscr; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); + switch (state) { case PM_SUSPEND_MEM: /* Clear MPEN and SPEN to disable MPLL/SPLL */ - cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr = imx_readl(ccm_base); cscr &= 0xFFFFFFFC; - imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + imx_writel(cscr, ccm_base); /* Executes WFI */ cpu_do_idle(); break; diff --git a/arch/arm/mach-imx/ulpi.h b/arch/arm/mach-imx/ulpi.h deleted file mode 100644 index b367902c9c32..000000000000 --- a/arch/arm/mach-imx/ulpi.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MACH_ULPI_H -#define __MACH_ULPI_H - -#include <linux/usb/ulpi.h> - -#ifdef CONFIG_USB_ULPI_VIEWPORT -static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) -{ - return otg_ulpi_create(&ulpi_viewport_access_ops, flags); -} -#else -static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags) -{ - return NULL; -} -#endif - -#endif /* __MACH_ULPI_H */ - diff --git a/drivers/clk/imx/clk-imx27.c b/drivers/clk/imx/clk-imx27.c index a3753067fc12..5585ded8b8c6 100644 --- a/drivers/clk/imx/clk-imx27.c +++ b/drivers/clk/imx/clk-imx27.c @@ -181,79 +181,6 @@ static void __init _mx27_clocks_init(unsigned long fref) imx_print_silicon_rev("i.MX27", mx27_revision()); } -int __init mx27_clocks_init(unsigned long fref) -{ - ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K); - - _mx27_clocks_init(fref); - - clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0"); - - mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, GPT_TYPE_IMX21); - - return 0; -} - static void __init mx27_clocks_init_dt(struct device_node *np) { struct device_node *refnp; diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c index 4bb05e440cdd..7b13fb57d842 100644 --- a/drivers/clk/imx/clk-imx31.c +++ b/drivers/clk/imx/clk-imx31.c @@ -132,77 +132,6 @@ static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref) clk_disable_unprepare(clk[iim_gate]); } -int __init mx31_clocks_init(unsigned long fref) -{ - void __iomem *base; - - base = ioremap(MX31_CCM_BASE_ADDR, SZ_4K); - if (!base) - panic("%s: failed to map registers\n", __func__); - - _mx31_clocks_init(base, fref); - - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1"); - clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); - clk_register_clkdev(clk[pwm_gate], "pwm", NULL); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ckil], "ref", "imx21-rtc"); - clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc"); - clk_register_clkdev(clk[epit1_gate], "epit", NULL); - clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - /* i.mx31 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0"); - clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[firi_gate], "firi", NULL); - clk_register_clkdev(clk[ata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[rtic_gate], "rtic", NULL); - clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma"); - clk_register_clkdev(clk[iim_gate], "iim", NULL); - - - imx_register_uart_clocks(uart_clks); - mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31); - - return 0; -} - static void __init mx31_clocks_init_dt(struct device_node *np) { struct device_node *osc_np; diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c index e595f559907f..c1df03665c09 100644 --- a/drivers/clk/imx/clk-imx35.c +++ b/drivers/clk/imx/clk-imx35.c @@ -248,74 +248,6 @@ static void __init _mx35_clocks_init(void) imx_print_silicon_rev("i.MX35", mx35_revision()); } -int __init mx35_clocks_init(void) -{ - _mx35_clocks_init(); - - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); - clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1"); - clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1"); - clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0"); - clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1"); - clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2"); - /* i.mx35 has the i.mx27 type fec */ - clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - /* i.mx35 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - /* i.mx35 has the i.mx21 type rtc */ - clk_register_clkdev(clk[ckil], "ref", "imx21-rtc"); - clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - clk_register_clkdev(clk[admux_gate], "audmux", NULL); - - mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31); - - return 0; -} - static void __init mx35_clocks_init_dt(struct device_node *ccm_node) { _mx35_clocks_init(); |