summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJuenKit Yip <JuenKit_Yip@hotmail.com>2023-06-16 19:00:16 +0300
committerGuenter Roeck <linux@roeck-us.net>2023-06-17 19:14:39 +0300
commitaf5ab550125f1bbae0ba89ed8e1994a11f40b96a (patch)
tree7d0d3992e6c6287c27e7c267962aa9215d33d092
parent3d2c211c0d2b5955b4ec9a1af7d59e8bed00c7fe (diff)
downloadlinux-af5ab550125f1bbae0ba89ed8e1994a11f40b96a.tar.xz
hwmon: (sht3x) Add new non-stardard sysfs attribute
Add "repeatability" attribute to sysfs, it could be read or written to control the sensor. Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com> Link: https://lore.kernel.org/r/DB4PR10MB6261B507C7656E3568DA33E39258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM [groeck: Fixed multi-line alignment; dropped check of unsigned against < 0] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-rw-r--r--Documentation/hwmon/sht3x.rst12
-rw-r--r--drivers/hwmon/sht3x.c33
2 files changed, 40 insertions, 5 deletions
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst
index b4aa561f03ab..87864ffd1777 100644
--- a/Documentation/hwmon/sht3x.rst
+++ b/Documentation/hwmon/sht3x.rst
@@ -28,11 +28,6 @@ The device communicates with the I2C protocol. Sensors can have the I2C
addresses 0x44 or 0x45, depending on the wiring. See
Documentation/i2c/instantiating-devices.rst for methods to instantiate the device.
-There is only one option configurable by means of sht3x_data:
-
- repeatability: high repeatability is used by default and using it is
- strongly recommended.
-
Even if sht3x sensor supports clock-strech(blocking mode) and non-strench
(non-blocking mode) in single-shot mode, this driver only supports the latter.
@@ -83,4 +78,11 @@ heater_enable: heater enable, heating element removes excess humidity from
update_interval: update interval, 0 for single shot, interval in msec
for periodic measurement. If the interval is not supported
by the sensor, the next faster interval is chosen
+repeatability: write or read repeatability, higher repeatability means
+ longer measurement duration, lower noise level and
+ larger energy consumption:
+
+ - 0: low repeatability
+ - 1: medium repeatability
+ - 2: high repeatability
=================== ============================================================
diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
index 111b86d9adb5..cbfb219cef2d 100644
--- a/drivers/hwmon/sht3x.c
+++ b/drivers/hwmon/sht3x.c
@@ -637,6 +637,37 @@ out:
return count;
}
+static ssize_t repeatability_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", data->repeatability);
+}
+
+static ssize_t repeatability_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 val;
+
+ struct sht3x_data *data = dev_get_drvdata(dev);
+
+ ret = kstrtou8(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ if (val > 2)
+ return -EINVAL;
+
+ data->repeatability = val;
+
+ return count;
+}
+
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp1_input, 0);
static SENSOR_DEVICE_ATTR_RO(humidity1_input, humidity1_input, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp1_limit, limit_max);
@@ -653,6 +684,7 @@ static SENSOR_DEVICE_ATTR_RO(temp1_alarm, temp1_alarm, 0);
static SENSOR_DEVICE_ATTR_RO(humidity1_alarm, humidity1_alarm, 0);
static SENSOR_DEVICE_ATTR_RW(heater_enable, heater_enable, 0);
static SENSOR_DEVICE_ATTR_RW(update_interval, update_interval, 0);
+static SENSOR_DEVICE_ATTR_RW(repeatability, repeatability, 0);
static struct attribute *sht3x_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -669,6 +701,7 @@ static struct attribute *sht3x_attrs[] = {
&sensor_dev_attr_humidity1_alarm.dev_attr.attr,
&sensor_dev_attr_heater_enable.dev_attr.attr,
&sensor_dev_attr_update_interval.dev_attr.attr,
+ &sensor_dev_attr_repeatability.dev_attr.attr,
NULL
};