summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2010-12-28 23:11:36 +0300
committerJeff Garzik <jgarzik@redhat.com>2011-01-08 06:33:31 +0300
commitb197f13b53681c606e59d7d9a8a1d2d54fd363fe (patch)
treef0c8af11528d82b728f701741e5272de5fb94802
parent49bfbd38bfc997e9081beabd758b2bd655d26a9c (diff)
downloadlinux-b197f13b53681c606e59d7d9a8a1d2d54fd363fe.tar.xz
pata_hpt3x2n: coding style cleanup
Fix 8 errors and 3 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--drivers/ata/pata_hpt3x2n.c86
1 files changed, 47 insertions, 39 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 809a4b4e88ab..d2239bbdb798 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.12"
+#define DRV_VERSION "0.3.13"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -103,7 +103,7 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
{
struct hpt_clock *clocks = hpt3x2n_clocks;
- while(clocks->xfer_speed) {
+ while (clocks->xfer_speed) {
if (clocks->xfer_speed == speed)
return clocks->timing;
clocks++;
@@ -169,6 +169,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
@@ -384,12 +385,12 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev)
u32 reg5c;
int tries;
- for(tries = 0; tries < 0x5000; tries++) {
+ for (tries = 0; tries < 0x5000; tries++) {
udelay(50);
pci_read_config_byte(dev, 0x5b, &reg5b);
if (reg5b & 0x80) {
/* See if it stays set */
- for(tries = 0; tries < 0x1000; tries ++) {
+ for (tries = 0; tries < 0x1000; tries++) {
pci_read_config_byte(dev, 0x5b, &reg5b);
/* Failed ? */
if ((reg5b & 0x80) == 0)
@@ -397,7 +398,7 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev)
}
/* Turn off tuning, we have the DPLL set */
pci_read_config_dword(dev, 0x5c, &reg5c);
- pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100);
+ pci_write_config_dword(dev, 0x5c, reg5c & ~0x100);
return 1;
}
}
@@ -501,34 +502,36 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- switch(dev->device) {
- case PCI_DEVICE_ID_TTI_HPT366:
- /* 372N if rev >= 6 */
- if (rev < 6)
- return -ENODEV;
- goto hpt372n;
- case PCI_DEVICE_ID_TTI_HPT371:
- /* 371N if rev >= 2 */
- if (rev < 2)
- return -ENODEV;
- break;
- case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2 */
- if (rev < 2)
- return -ENODEV;
- goto hpt372n;
- case PCI_DEVICE_ID_TTI_HPT302:
- /* 302N if rev >= 2 */
- if (rev < 2)
- return -ENODEV;
- break;
- case PCI_DEVICE_ID_TTI_HPT372N:
-hpt372n:
- ppi[0] = &info_hpt372n;
- break;
- default:
- printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device);
+ switch (dev->device) {
+ case PCI_DEVICE_ID_TTI_HPT366:
+ /* 372N if rev >= 6 */
+ if (rev < 6)
+ return -ENODEV;
+ goto hpt372n;
+ case PCI_DEVICE_ID_TTI_HPT371:
+ /* 371N if rev >= 2 */
+ if (rev < 2)
+ return -ENODEV;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT372:
+ /* 372N if rev >= 2 */
+ if (rev < 2)
+ return -ENODEV;
+ goto hpt372n;
+ case PCI_DEVICE_ID_TTI_HPT302:
+ /* 302N if rev >= 2 */
+ if (rev < 2)
return -ENODEV;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT372N:
+hpt372n:
+ ppi[0] = &info_hpt372n;
+ break;
+ default:
+ printk(KERN_ERR
+ "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+ dev->device);
+ return -ENODEV;
}
/* Ok so this is a chip we support */
@@ -555,8 +558,10 @@ hpt372n:
pci_write_config_byte(dev, 0x50, mcr1);
}
- /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
- 50 for UDMA100. Right now we always use 66 */
+ /*
+ * Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
+ * 50 for UDMA100. Right now we always use 66
+ */
pci_mhz = hpt3x2n_pci_clock(dev);
@@ -568,7 +573,7 @@ hpt372n:
pci_write_config_byte(dev, 0x5B, 0x21);
/* Unlike the 37x we don't try jiggling the frequency */
- for(adjust = 0; adjust < 8; adjust++) {
+ for (adjust = 0; adjust < 8; adjust++) {
if (hpt3xn_calibrate_dpll(dev))
break;
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
@@ -580,8 +585,11 @@ hpt372n:
printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
pci_mhz);
- /* Set our private data up. We only need a few flags so we use
- it directly */
+
+ /*
+ * Set our private data up. We only need a few flags
+ * so we use it directly.
+ */
if (pci_mhz > 60)
hpriv = (void *)(PCI66 | USE_DPLL);
@@ -608,9 +616,9 @@ static const struct pci_device_id hpt3x2n[] = {
};
static struct pci_driver hpt3x2n_pci_driver = {
- .name = DRV_NAME,
+ .name = DRV_NAME,
.id_table = hpt3x2n,
- .probe = hpt3x2n_init_one,
+ .probe = hpt3x2n_init_one,
.remove = ata_pci_remove_one
};