ASoC: wm0010: Convert to GPIO descriptors

This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 23 insertions, 43 deletions

diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 8fce1e815ee8..a9a713641047 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,9 +32,18 @@
 
 #include "crag6410.h"
 
+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info wm1253_devs[] = {
@@ -337,7 +346,8 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
diff --git a/include/sound/wm0010.h b/include/sound/wm0010.h
index 13b473935ca1..14ff9056c5d0 100644
--- a/include/sound/wm0010.h
+++ b/include/sound/wm0010.h
@@ -11,12 +11,6 @@
 #define WM0010_PDATA_H
 
 struct wm0010_pdata {
-	int gpio_reset;
-
-	/* Set if there is an inverter between the GPIO controlling
-	 * the reset signal and the device.
-	 */
-	int reset_active_high;
 	int irq_flags;
 };
 
diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c
index 1d4259433f47..8f862729a2ca 100644
--- a/sound/soc/codecs/wm0010.c
+++ b/sound/soc/codecs/wm0010.c
@@ -18,7 +18,7 @@
 #include <linux/firmware.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
@@ -94,8 +94,7 @@ struct wm0010_priv {
 
 	struct wm0010_pdata pdata;
 
-	int gpio_reset;
-	int gpio_reset_value;
+	struct gpio_desc *reset;
 
 	struct regulator_bulk_data core_supplies[2];
 	struct regulator *dbvdd;
@@ -174,8 +173,7 @@ static void wm0010_halt(struct snd_soc_component *component)
 	case WM0010_STAGE2:
 	case WM0010_FIRMWARE:
 		/* Remember to put chip back into reset */
-		gpio_set_value_cansleep(wm0010->gpio_reset,
-					wm0010->gpio_reset_value);
+		gpiod_set_value_cansleep(wm0010->reset, 1);
 		/* Disable the regulators */
 		regulator_disable(wm0010->dbvdd);
 		regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies),
@@ -610,7 +608,7 @@ static int wm0010_boot(struct snd_soc_component *component)
 	}
 
 	/* Release reset */
-	gpio_set_value_cansleep(wm0010->gpio_reset, !wm0010->gpio_reset_value);
+	gpiod_set_value_cansleep(wm0010->reset, 0);
 	spin_lock_irqsave(&wm0010->irq_lock, flags);
 	wm0010->state = WM0010_OUT_OF_RESET;
 	spin_unlock_irqrestore(&wm0010->irq_lock, flags);
@@ -863,7 +861,6 @@ static int wm0010_probe(struct snd_soc_component *component)
 
 static int wm0010_spi_probe(struct spi_device *spi)
 {
-	unsigned long gpio_flags;
 	int ret;
 	int trigger;
 	int irq;
@@ -903,31 +900,11 @@ static int wm0010_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	if (wm0010->pdata.gpio_reset) {
-		wm0010->gpio_reset = wm0010->pdata.gpio_reset;
-
-		if (wm0010->pdata.reset_active_high)
-			wm0010->gpio_reset_value = 1;
-		else
-			wm0010->gpio_reset_value = 0;
-
-		if (wm0010->gpio_reset_value)
-			gpio_flags = GPIOF_OUT_INIT_HIGH;
-		else
-			gpio_flags = GPIOF_OUT_INIT_LOW;
-
-		ret = devm_gpio_request_one(wm0010->dev, wm0010->gpio_reset,
-					    gpio_flags, "wm0010 reset");
-		if (ret < 0) {
-			dev_err(wm0010->dev,
-				"Failed to request GPIO for DSP reset: %d\n",
-				ret);
-			return ret;
-		}
-	} else {
-		dev_err(wm0010->dev, "No reset GPIO configured\n");
-		return -EINVAL;
-	}
+	wm0010->reset = devm_gpiod_get(wm0010->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(wm0010->reset))
+		return dev_err_probe(wm0010->dev, PTR_ERR(wm0010->reset),
+				     "could not get RESET GPIO\n");
+	gpiod_set_consumer_name(wm0010->reset, "wm0010 reset");
 
 	wm0010->state = WM0010_POWER_OFF;
 
@@ -972,8 +949,7 @@ static void wm0010_spi_remove(struct spi_device *spi)
 {
 	struct wm0010_priv *wm0010 = spi_get_drvdata(spi);
 
-	gpio_set_value_cansleep(wm0010->gpio_reset,
-				wm0010->gpio_reset_value);
+	gpiod_set_value_cansleep(wm0010->reset, 1);
 
 	irq_set_irq_wake(wm0010->irq, 0);