summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2011-11-18 05:59:52 +0400
committerJames Bottomley <JBottomley@Parallels.com>2012-02-19 23:55:42 +0400
commitb91bb296188118eea9fdc6093cfcf76bbe8589ba (patch)
tree8fe9dda8894514f9cd1184368eab975583c12f3c
parent87c8331fcf72e501c3a3c0cdc5c9391ec72f7cf2 (diff)
downloadlinux-b91bb296188118eea9fdc6093cfcf76bbe8589ba.tar.xz
[SCSI] libsas: use ->set_dmamode to notify lldds of NCQ parameters
sas_discover_sata() notifies lldds of sata devices twice. Once to allow the 'identify' to be sent, and a second time to allow aic94xx (the only libsas driver that cares about sata_dev.identify) to setup NCQ parameters before the device becomes known to the midlayer. Replace this double notification and intervening 'identify' with an explicit ->lldd_ata_set_dmamode notification. With this change all ata internal commands are issued by libata, so we no longer need sas_issue_ata_cmd(). The data from the identify command only needs to be cached in one location so ata_device.id replaces domain_device.sata_dev.identify. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-rw-r--r--drivers/scsi/aic94xx/aic94xx.h2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dev.c38
-rw-r--r--drivers/scsi/aic94xx/aic94xx_init.c2
-rw-r--r--drivers/scsi/libsas/sas_ata.c324
-rw-r--r--drivers/scsi/libsas/sas_discover.c5
-rw-r--r--include/scsi/libsas.h4
6 files changed, 49 insertions, 326 deletions
diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
index 2863a9d22851..66cda669b417 100644
--- a/drivers/scsi/aic94xx/aic94xx.h
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -80,6 +80,8 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags);
+void asd_set_dmamode(struct domain_device *dev);
+
/* ---------- TMFs ---------- */
int asd_abort_task(struct sas_task *);
int asd_abort_task_set(struct domain_device *, u8 *lun);
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
index 2e2ddec9c0b6..64136c56e706 100644
--- a/drivers/scsi/aic94xx/aic94xx_dev.c
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -109,26 +109,37 @@ static int asd_init_sata_tag_ddb(struct domain_device *dev)
return 0;
}
-static int asd_init_sata(struct domain_device *dev)
+void asd_set_dmamode(struct domain_device *dev)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct ata_device *ata_dev = sas_to_ata_dev(dev);
int ddb = (int) (unsigned long) dev->lldd_dev;
u32 qdepth = 0;
- int res = 0;
- asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
- if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) &&
- dev->sata_dev.identify_device &&
- dev->sata_dev.identify_device[10] != 0) {
- u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]);
- u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]);
-
- if (w76 & 0x100) /* NCQ? */
- qdepth = (w75 & 0x1F) + 1;
+ if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) {
+ if (ata_id_has_ncq(ata_dev->id))
+ qdepth = ata_id_queue_depth(ata_dev->id);
asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
(1ULL<<qdepth)-1);
asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth);
}
+
+ if (qdepth > 0)
+ if (asd_init_sata_tag_ddb(dev) != 0) {
+ unsigned long flags;
+
+ spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
+ ata_dev->flags |= ATA_DFLAG_NCQ_OFF;
+ spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
+ }
+}
+
+static int asd_init_sata(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb = (int) (unsigned long) dev->lldd_dev;
+
+ asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
dev->dev_type == SATA_PM_PORT) {
struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
@@ -136,9 +147,8 @@ static int asd_init_sata(struct domain_device *dev)
asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
}
asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF);
- if (qdepth > 0)
- res = asd_init_sata_tag_ddb(dev);
- return res;
+
+ return 0;
}
static int asd_init_target_ddb(struct domain_device *dev)
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 2b3717f6d22c..eea988a04f92 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -1009,6 +1009,8 @@ static struct sas_domain_function_template aic94xx_transport_functions = {
.lldd_clear_nexus_ha = asd_clear_nexus_ha,
.lldd_control_phy = asd_control_phy,
+
+ .lldd_ata_set_dmamode = asd_set_dmamode,
};
static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 4b6365c6410f..71af919b856c 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -367,6 +367,17 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
}
}
+
+static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
+{
+ struct domain_device *dev = ap->private_data;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ if (i->dft->lldd_ata_set_dmamode)
+ i->dft->lldd_ata_set_dmamode(dev);
+}
+
static struct ata_port_operations sas_sata_ops = {
.prereset = ata_std_prereset,
.softreset = sas_ata_soft_reset,
@@ -380,6 +391,7 @@ static struct ata_port_operations sas_sata_ops = {
.qc_fill_rtf = sas_ata_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop,
+ .set_dmamode = sas_ata_set_dmamode,
};
static struct ata_port_info sata_port_info = {
@@ -442,163 +454,6 @@ void sas_ata_task_abort(struct sas_task *task)
complete(waiting);
}
-static void sas_task_timedout(unsigned long _task)
-{
- struct sas_task *task = (void *) _task;
- unsigned long flags;
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
- task->task_state_flags |= SAS_TASK_STATE_ABORTED;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- complete(&task->completion);
-}
-
-static void sas_disc_task_done(struct sas_task *task)
-{
- if (!del_timer(&task->timer))
- return;
- complete(&task->completion);
-}
-
-#define SAS_DEV_TIMEOUT 10
-
-/**
- * sas_execute_task -- Basic task processing for discovery
- * @task: the task to be executed
- * @buffer: pointer to buffer to do I/O
- * @size: size of @buffer
- * @dma_dir: DMA direction. DMA_xxx
- */
-static int sas_execute_task(struct sas_task *task, void *buffer, int size,
- enum dma_data_direction dma_dir)
-{
- int res = 0;
- struct scatterlist *scatter = NULL;
- struct task_status_struct *ts = &task->task_status;
- int num_scatter = 0;
- int retries = 0;
- struct sas_internal *i =
- to_sas_internal(task->dev->port->ha->core.shost->transportt);
-
- if (dma_dir != DMA_NONE) {
- scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
- if (!scatter)
- goto out;
-
- sg_init_one(scatter, buffer, size);
- num_scatter = 1;
- }
-
- task->task_proto = task->dev->tproto;
- task->scatter = scatter;
- task->num_scatter = num_scatter;
- task->total_xfer_len = size;
- task->data_dir = dma_dir;
- task->task_done = sas_disc_task_done;
- if (dma_dir != DMA_NONE &&
- sas_protocol_ata(task->task_proto)) {
- task->num_scatter = dma_map_sg(task->dev->port->ha->dev,
- task->scatter,
- task->num_scatter,
- task->data_dir);
- }
-
- for (retries = 0; retries < 5; retries++) {
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_completion(&task->completion);
-
- task->timer.data = (unsigned long) task;
- task->timer.function = sas_task_timedout;
- task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
- add_timer(&task->timer);
-
- res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
- if (res) {
- del_timer(&task->timer);
- SAS_DPRINTK("executing SAS discovery task failed:%d\n",
- res);
- goto ex_err;
- }
- wait_for_completion(&task->completion);
- res = -ECOMM;
- if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
- int res2;
- SAS_DPRINTK("task aborted, flags:0x%x\n",
- task->task_state_flags);
- res2 = i->dft->lldd_abort_task(task);
- SAS_DPRINTK("came back from abort task\n");
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- if (res2 == TMF_RESP_FUNC_COMPLETE)
- continue; /* Retry the task */
- else
- goto ex_err;
- }
- }
- if (task->task_status.stat == SAM_STAT_BUSY ||
- task->task_status.stat == SAM_STAT_TASK_SET_FULL ||
- task->task_status.stat == SAS_QUEUE_FULL) {
- SAS_DPRINTK("task: q busy, sleeping...\n");
- schedule_timeout_interruptible(HZ);
- } else if (task->task_status.stat == SAM_STAT_CHECK_CONDITION) {
- struct scsi_sense_hdr shdr;
-
- if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
- &shdr)) {
- SAS_DPRINTK("couldn't normalize sense\n");
- continue;
- }
- if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
- (shdr.sense_key == 2 && shdr.asc == 4 &&
- shdr.ascq == 1)) {
- SAS_DPRINTK("device %016llx LUN: %016llx "
- "powering up or not ready yet, "
- "sleeping...\n",
- SAS_ADDR(task->dev->sas_addr),
- SAS_ADDR(task->ssp_task.LUN));
-
- schedule_timeout_interruptible(5*HZ);
- } else if (shdr.sense_key == 1) {
- res = 0;
- break;
- } else if (shdr.sense_key == 5) {
- break;
- } else {
- SAS_DPRINTK("dev %016llx LUN: %016llx "
- "sense key:0x%x ASC:0x%x ASCQ:0x%x"
- "\n",
- SAS_ADDR(task->dev->sas_addr),
- SAS_ADDR(task->ssp_task.LUN),
- shdr.sense_key,
- shdr.asc, shdr.ascq);
- }
- } else if (task->task_status.resp != SAS_TASK_COMPLETE ||
- task->task_status.stat != SAM_STAT_GOOD) {
- SAS_DPRINTK("task finished with resp:0x%x, "
- "stat:0x%x\n",
- task->task_status.resp,
- task->task_status.stat);
- goto ex_err;
- } else {
- res = 0;
- break;
- }
- }
-ex_err:
- if (dma_dir != DMA_NONE) {
- if (sas_protocol_ata(task->task_proto))
- dma_unmap_sg(task->dev->port->ha->dev,
- task->scatter, task->num_scatter,
- task->data_dir);
- kfree(scatter);
- }
-out:
- return res;
-}
-
-/* ---------- SATA ---------- */
-
static void sas_get_ata_command_set(struct domain_device *dev)
{
struct dev_to_host_fis *fis =
@@ -642,122 +497,6 @@ static void sas_get_ata_command_set(struct domain_device *dev)
dev->sata_dev.command_set = ATAPI_COMMAND_SET;
}
-/**
- * sas_issue_ata_cmd -- Basic SATA command processing for discovery
- * @dev: the device to send the command to
- * @command: the command register
- * @features: the features register
- * @buffer: pointer to buffer to do I/O
- * @size: size of @buffer
- * @dma_dir: DMA direction. DMA_xxx
- */
-static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
- u8 features, void *buffer, int size,
- enum dma_data_direction dma_dir)
-{
- int res = 0;
- struct sas_task *task;
- struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
- &dev->frame_rcvd[0];
-
- res = -ENOMEM;
- task = sas_alloc_task(GFP_KERNEL);
- if (!task)
- goto out;
-
- task->dev = dev;
-
- task->ata_task.fis.fis_type = 0x27;
- task->ata_task.fis.command = command;
- task->ata_task.fis.features = features;
- task->ata_task.fis.device = d2h_fis->device;
- task->ata_task.retry_count = 1;
-
- res = sas_execute_task(task, buffer, size, dma_dir);
-
- sas_free_task(task);
-out:
- return res;
-}
-
-#define ATA_IDENTIFY_DEV 0xEC
-#define ATA_IDENTIFY_PACKET_DEV 0xA1
-#define ATA_SET_FEATURES 0xEF
-#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
-
-/**
- * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
- * @dev: STP/SATA device of interest (ATA/ATAPI)
- *
- * The LLDD has already been notified of this device, so that we can
- * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY
- * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
- * performance for this device.
- */
-static int sas_discover_sata_dev(struct domain_device *dev)
-{
- int res;
- __le16 *identify_x;
- u8 command;
-
- identify_x = kzalloc(512, GFP_KERNEL);
- if (!identify_x)
- return -ENOMEM;
-
- if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
- dev->sata_dev.identify_device = identify_x;
- command = ATA_IDENTIFY_DEV;
- } else {
- dev->sata_dev.identify_packet_device = identify_x;
- command = ATA_IDENTIFY_PACKET_DEV;
- }
-
- res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
- DMA_FROM_DEVICE);
- if (res)
- goto out_err;
-
- /* lives on the media? */
- if (le16_to_cpu(identify_x[0]) & 4) {
- /* incomplete response */
- SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
- "dev %llx\n", SAS_ADDR(dev->sas_addr));
- if (!(identify_x[83] & cpu_to_le16(1<<6)))
- goto cont1;
- res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
- ATA_FEATURE_PUP_STBY_SPIN_UP,
- NULL, 0, DMA_NONE);
- if (res)
- goto cont1;
-
- schedule_timeout_interruptible(5*HZ); /* More time? */
- res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
- DMA_FROM_DEVICE);
- if (res)
- goto out_err;
- }
-cont1:
- /* XXX Hint: register this SATA device with SATL.
- When this returns, dev->sata_dev->lu is alive and
- present.
- sas_satl_register_dev(dev);
- */
-
- sas_fill_in_rphy(dev, dev->rphy);
-
- return 0;
-out_err:
- dev->sata_dev.identify_packet_device = NULL;
- dev->sata_dev.identify_device = NULL;
- kfree(identify_x);
- return res;
-}
-
-static int sas_discover_sata_pm(struct domain_device *dev)
-{
- return -ENODEV;
-}
-
void sas_probe_sata(struct work_struct *work)
{
struct domain_device *dev, *n;
@@ -791,49 +530,26 @@ void sas_probe_sata(struct work_struct *work)
* sas_discover_sata -- discover an STP/SATA domain device
* @dev: pointer to struct domain_device of interest
*
- * First we notify the LLDD of this device, so we can send frames to
- * it. Then depending on the type of device we call the appropriate
- * discover functions. Once device discover is done, we notify the
- * LLDD so that it can fine-tune its parameters for the device, by
- * removing it and then adding it. That is, the second time around,
- * the driver would have certain fields, that it is looking at, set.
- * Finally we initialize the kobj so that the device can be added to
- * the system at registration time. Devices directly attached to a HA
- * port, have no parents. All other devices do, and should have their
- * "parent" pointer set appropriately before calling this function.
+ * Devices directly attached to a HA port, have no parents. All other
+ * devices do, and should have their "parent" pointer set appropriately
+ * before calling this function.
*/
int sas_discover_sata(struct domain_device *dev)
{
int res;
- sas_get_ata_command_set(dev);
-
- res = sas_notify_lldd_dev_found(dev);
- if (res)
- return res;
-
- switch (dev->dev_type) {
- case SATA_DEV:
- res = sas_discover_sata_dev(dev);
- break;
- case SATA_PM:
- res = sas_discover_sata_pm(dev);
- break;
- default:
- break;
- }
- sas_notify_lldd_dev_gone(dev);
+ if (dev->dev_type == SATA_PM)
+ return -ENODEV;
- if (res)
- return res;
+ sas_get_ata_command_set(dev);
+ sas_fill_in_rphy(dev, dev->rphy);
res = sas_notify_lldd_dev_found(dev);
if (res)
return res;
sas_discover_event(dev->port, DISCE_PROBE);
-
- return res;
+ return 0;
}
void sas_ata_strategy_handler(struct Scsi_Host *shost)
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 7e8fdcb202b7..bad5eba4a92b 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -237,11 +237,6 @@ void sas_free_device(struct kref *kref)
if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV)
kfree(dev->ex_dev.ex_phy);
- if (dev_is_sata(dev)) {
- kfree(dev->sata_dev.identify_device);
- kfree(dev->sata_dev.identify_packet_device);
- }
-
kfree(dev);
}
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index bd6e89ece2ab..9c13a5c0bb3a 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -164,9 +164,6 @@ enum ata_command_set {
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
- __le16 *identify_device;
- __le16 *identify_packet_device;
-
u8 port_no; /* port number, if this is a PM (Port) */
struct list_head children; /* PM Ports if this is a PM */
@@ -609,6 +606,7 @@ struct sas_domain_function_template {
int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
int (*lldd_I_T_nexus_reset)(struct domain_device *);
int (*lldd_ata_soft_reset)(struct domain_device *);
+ void (*lldd_ata_set_dmamode)(struct domain_device *);
int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
int (*lldd_query_task)(struct sas_task *);