summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAditya Srivastava <yashsri421@gmail.com>2021-03-21 15:09:12 +0300
committerHerbert Xu <herbert@gondor.apana.org.au>2021-03-26 12:15:58 +0300
commitce668da5f11e3aeed49843980b70529aa61f4275 (patch)
tree31633acf5b1fd71a1d3c1109b1816ce05512d0b4
parent73f04d3d800f3c8058bb00447e3e1c4cdc85a2b0 (diff)
downloadlinux-ce668da5f11e3aeed49843980b70529aa61f4275.tar.xz
crypto: ux500 - fix incorrect kernel-doc comment syntax
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are certain files in drivers/crypto/ux500, which follow this syntax, but the content inside does not comply with kernel-doc. Such lines were probably not meant for kernel-doc parsing, but are parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warnings from kernel-doc. E.g., presence of kernel-doc like comment in the header lines for drivers/crypto/ux500/cryp/cryp.h at header causes this warning: "warning: expecting prototype for ST(). Prototype was for _CRYP_H_() instead" Similarly for other files too. Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-rw-r--r--drivers/crypto/ux500/cryp/cryp.h2
-rw-r--r--drivers/crypto/ux500/cryp/cryp_irq.h4
-rw-r--r--drivers/crypto/ux500/cryp/cryp_irqp.h4
-rw-r--r--drivers/crypto/ux500/cryp/cryp_p.h14
4 files changed, 12 insertions, 12 deletions
diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h
index 8da7f87b339b..db5713d7c940 100644
--- a/drivers/crypto/ux500/cryp/cryp.h
+++ b/drivers/crypto/ux500/cryp/cryp.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
diff --git a/drivers/crypto/ux500/cryp/cryp_irq.h b/drivers/crypto/ux500/cryp/cryp_irq.h
index 1984f30100ff..da90029ea141 100644
--- a/drivers/crypto/ux500/cryp/cryp_irq.h
+++ b/drivers/crypto/ux500/cryp/cryp_irq.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -19,7 +19,7 @@ enum cryp_irq_src_id {
CRYP_IRQ_SRC_ALL = 0x3
};
-/**
+/*
* M0 Funtions
*/
void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src);
diff --git a/drivers/crypto/ux500/cryp/cryp_irqp.h b/drivers/crypto/ux500/cryp/cryp_irqp.h
index 879ed68a12d7..4981a3f461e5 100644
--- a/drivers/crypto/ux500/cryp/cryp_irqp.h
+++ b/drivers/crypto/ux500/cryp/cryp_irqp.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -13,7 +13,7 @@
#include "cryp_irq.h"
-/**
+/*
*
* CRYP Registers - Offset mapping
* +-----------------+
diff --git a/drivers/crypto/ux500/cryp/cryp_p.h b/drivers/crypto/ux500/cryp/cryp_p.h
index 0df84eaa8531..ba17b1ffd94d 100644
--- a/drivers/crypto/ux500/cryp/cryp_p.h
+++ b/drivers/crypto/ux500/cryp/cryp_p.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
* Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
@@ -17,7 +17,7 @@
#include "cryp.h"
#include "cryp_irqp.h"
-/**
+/*
* Generic Macros
*/
#define CRYP_SET_BITS(reg_name, mask) \
@@ -34,7 +34,7 @@
writel_relaxed(((readl_relaxed(reg) & ~(mask)) | \
(((u32)val << shift) & (mask))), reg)
-/**
+/*
* CRYP specific Macros
*/
#define CRYP_PERIPHERAL_ID0 0xE3
@@ -48,7 +48,7 @@
#define CRYP_PCELL_ID2 0x05
#define CRYP_PCELL_ID3 0xB1
-/**
+/*
* CRYP register default values
*/
#define MAX_DEVICE_SUPPORT 2
@@ -62,7 +62,7 @@
#define CRYP_KEY_DEFAULT 0x0
#define CRYP_INIT_VECT_DEFAULT 0x0
-/**
+/*
* CRYP Control register specific mask
*/
#define CRYP_CR_SECURE_MASK BIT(0)
@@ -91,7 +91,7 @@
#define CRYP_SR_IFEM_MASK BIT(0)
#define CRYP_SR_BUSY_MASK BIT(4)
-/**
+/*
* Bit position used while setting bits in register
*/
#define CRYP_CR_PRLG_POS 1
@@ -107,7 +107,7 @@
#define CRYP_SR_BUSY_POS 4
-/**
+/*
* CRYP PCRs------PC_NAND control register
* BIT_MASK
*/