summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-10-08 02:48:26 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2022-10-08 02:48:26 +0300
commitd3dcbe24a0fc6373ce7e4a65acd5c785aa8e2396 (patch)
tree2072b4977f2e22f0b51bd7e48f131c48c14e896d
parent6181073dd6a7e5deafc60e7981bd765b6c93da8c (diff)
parent00988f70a0763f14c97c4c0df76fb9aa4959e953 (diff)
downloadlinux-d3dcbe24a0fc6373ce7e4a65acd5c785aa8e2396.tar.xz
Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
-rw-r--r--Documentation/ABI/testing/sysfs-bus-thunderbolt4
-rw-r--r--Documentation/devicetree/bindings/phy/mxs-usb-phy.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/analogix,anx7411.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/faraday,fotg210.txt35
-rw-r--r--Documentation/devicetree/bindings/usb/faraday,fotg210.yaml77
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml36
-rw-r--r--Documentation/devicetree/bindings/usb/npcm7xx-usb.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.yaml6
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml99
-rw-r--r--Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml100
-rw-r--r--Documentation/devicetree/bindings/usb/snps,dwc3.yaml12
-rw-r--r--Documentation/devicetree/bindings/usb/st,stusb160x.yaml12
-rw-r--r--Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml1
-rw-r--r--Documentation/usb/usbip_protocol.rst13
-rw-r--r--MAINTAINERS3
-rw-r--r--arch/arm/mach-s3c/mach-gta02.c10
-rw-r--r--arch/arm/mach-s3c/mach-h1940.c13
-rw-r--r--arch/arm/mach-s3c/mach-jive.c10
-rw-r--r--arch/arm/mach-s3c/mach-mini2440.c9
-rw-r--r--arch/arm/mach-s3c/mach-n30.c13
-rw-r--r--arch/arm/mach-s3c/mach-rx1950.c13
-rw-r--r--arch/arm/mach-s3c/mach-smdk2413.c12
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp.dtsi4
-rw-r--r--drivers/media/usb/b2c2/flexcop-usb.c22
-rw-r--r--drivers/media/usb/uvc/uvc_ctrl.c1
-rw-r--r--drivers/media/usb/uvc/uvc_driver.c290
-rw-r--r--drivers/media/usb/uvc/uvc_v4l2.c14
-rw-r--r--drivers/media/usb/uvc/uvcvideo.h147
-rw-r--r--drivers/media/v4l2-core/v4l2-common.c86
-rw-r--r--drivers/phy/tegra/xusb-tegra186.c19
-rw-r--r--drivers/phy/tegra/xusb.c22
-rw-r--r--drivers/phy/tegra/xusb.h4
-rw-r--r--drivers/thunderbolt/Kconfig10
-rw-r--r--drivers/thunderbolt/debugfs.c836
-rw-r--r--drivers/thunderbolt/domain.c10
-rw-r--r--drivers/thunderbolt/icm.c3
-rw-r--r--drivers/thunderbolt/nhi.c55
-rw-r--r--drivers/thunderbolt/nhi.h3
-rw-r--r--drivers/thunderbolt/nvm.c385
-rw-r--r--drivers/thunderbolt/retimer.c113
-rw-r--r--drivers/thunderbolt/sb_regs.h58
-rw-r--r--drivers/thunderbolt/switch.c449
-rw-r--r--drivers/thunderbolt/tb.c33
-rw-r--r--drivers/thunderbolt/tb.h56
-rw-r--r--drivers/thunderbolt/tb_regs.h3
-rw-r--r--drivers/thunderbolt/usb4.c140
-rw-r--r--drivers/thunderbolt/xdomain.c35
-rw-r--r--drivers/usb/atm/usbatm.c2
-rw-r--r--drivers/usb/cdns3/cdns3-plat.c2
-rw-r--r--drivers/usb/chipidea/Kconfig10
-rw-r--r--drivers/usb/chipidea/ci_hdrc_usb2.c1
-rw-r--r--drivers/usb/chipidea/host.c7
-rw-r--r--drivers/usb/chipidea/otg_fsm.c7
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/common/debug.c96
-rw-r--r--drivers/usb/common/ulpi.c20
-rw-r--r--drivers/usb/common/usb-conn-gpio.c6
-rw-r--r--drivers/usb/core/devio.c2
-rw-r--r--drivers/usb/core/hcd-pci.c7
-rw-r--r--drivers/usb/core/hcd.c11
-rw-r--r--drivers/usb/core/quirks.c13
-rw-r--r--drivers/usb/dwc2/core.c30
-rw-r--r--drivers/usb/dwc2/core.h30
-rw-r--r--drivers/usb/dwc2/core_intr.c30
-rw-r--r--drivers/usb/dwc2/hcd.c30
-rw-r--r--drivers/usb/dwc2/hcd.h31
-rw-r--r--drivers/usb/dwc2/hcd_ddma.c30
-rw-r--r--drivers/usb/dwc2/hcd_intr.c30
-rw-r--r--drivers/usb/dwc2/hcd_queue.c30
-rw-r--r--drivers/usb/dwc2/hw.h30
-rw-r--r--drivers/usb/dwc2/params.c30
-rw-r--r--drivers/usb/dwc2/pci.c30
-rw-r--r--drivers/usb/dwc2/platform.c30
-rw-r--r--drivers/usb/dwc3/core.c137
-rw-r--r--drivers/usb/dwc3/core.h7
-rw-r--r--drivers/usb/dwc3/debug.h4
-rw-r--r--drivers/usb/dwc3/drd.c50
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c14
-rw-r--r--drivers/usb/dwc3/dwc3-qcom.c22
-rw-r--r--drivers/usb/dwc3/dwc3-xilinx.c63
-rw-r--r--drivers/usb/dwc3/ep0.c11
-rw-r--r--drivers/usb/dwc3/gadget.c73
-rw-r--r--drivers/usb/dwc3/trace.h3
-rw-r--r--drivers/usb/gadget/function/f_fs.c6
-rw-r--r--drivers/usb/gadget/function/f_mass_storage.c11
-rw-r--r--drivers/usb/gadget/function/f_ncm.c60
-rw-r--r--drivers/usb/gadget/function/f_printer.c12
-rw-r--r--drivers/usb/gadget/function/f_tcm.c4
-rw-r--r--drivers/usb/gadget/function/f_uvc.c37
-rw-r--r--drivers/usb/gadget/function/rndis.c4
-rw-r--r--drivers/usb/gadget/function/u_ether.c8
-rw-r--r--drivers/usb/gadget/function/u_serial.c4
-rw-r--r--drivers/usb/gadget/function/uvc.h3
-rw-r--r--drivers/usb/gadget/function/uvc_v4l2.c294
-rw-r--r--drivers/usb/gadget/function/uvc_video.c9
-rw-r--r--drivers/usb/gadget/udc/at91_udc.c10
-rw-r--r--drivers/usb/gadget/udc/net2272.c4
-rw-r--r--drivers/usb/gadget/udc/omap_udc.c4
-rw-r--r--drivers/usb/gadget/udc/renesas_usb3.c131
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c78
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.h3
-rw-r--r--drivers/usb/gadget/udc/tegra-xudc.c6
-rw-r--r--drivers/usb/host/Kconfig8
-rw-r--r--drivers/usb/host/ehci-atmel.c3
-rw-r--r--drivers/usb/host/ehci-exynos.c19
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c1
-rw-r--r--drivers/usb/host/ehci-npcm7xx.c53
-rw-r--r--drivers/usb/host/ehci-omap.c2
-rw-r--r--drivers/usb/host/ehci-orion.c4
-rw-r--r--drivers/usb/host/ehci-pci.c4
-rw-r--r--drivers/usb/host/ehci-platform.c4
-rw-r--r--drivers/usb/host/ehci-q.c4
-rw-r--r--drivers/usb/host/ehci-spear.c4
-rw-r--r--drivers/usb/host/ehci-st.c4
-rw-r--r--drivers/usb/host/fhci-hcd.c63
-rw-r--r--drivers/usb/host/fhci-hub.c15
-rw-r--r--drivers/usb/host/fhci.h4
-rw-r--r--drivers/usb/host/fotg210-hcd.c1
-rw-r--r--drivers/usb/host/ohci-at91.c3
-rw-r--r--drivers/usb/host/ohci-da8xx.c1
-rw-r--r--drivers/usb/host/ohci-exynos.c2
-rw-r--r--drivers/usb/host/ohci-hcd.c1
-rw-r--r--drivers/usb/host/ohci-nxp.c2
-rw-r--r--drivers/usb/host/ohci-omap.c2
-rw-r--r--drivers/usb/host/ohci-pci.c4
-rw-r--r--drivers/usb/host/ohci-platform.c32
-rw-r--r--drivers/usb/host/ohci-pxa27x.c4
-rw-r--r--drivers/usb/host/ohci-s3c2410.c3
-rw-r--r--drivers/usb/host/ohci-spear.c3
-rw-r--r--drivers/usb/host/ohci-st.c4
-rw-r--r--drivers/usb/host/u132-hcd.c1
-rw-r--r--drivers/usb/host/uhci-hcd.c2
-rw-r--r--drivers/usb/host/uhci-pci.c2
-rw-r--r--drivers/usb/host/xhci-dbgcap.c2
-rw-r--r--drivers/usb/host/xhci-mem.c7
-rw-r--r--drivers/usb/host/xhci-pci.c2
-rw-r--r--drivers/usb/host/xhci-plat.c18
-rw-r--r--drivers/usb/host/xhci.c8
-rw-r--r--drivers/usb/host/xhci.h5
-rw-r--r--drivers/usb/misc/idmouse.c8
-rw-r--r--drivers/usb/misc/usb251xb.c18
-rw-r--r--drivers/usb/misc/usb3503.c25
-rw-r--r--drivers/usb/misc/uss720.c8
-rw-r--r--drivers/usb/mon/mon_bin.c5
-rw-r--r--drivers/usb/mtu3/mtu3_core.c2
-rw-r--r--drivers/usb/mtu3/mtu3_plat.c2
-rw-r--r--drivers/usb/musb/da8xx.c8
-rw-r--r--drivers/usb/musb/jz4740.c10
-rw-r--r--drivers/usb/musb/musb_core.c4
-rw-r--r--drivers/usb/musb/musb_cppi41.c6
-rw-r--r--drivers/usb/musb/musb_gadget.c3
-rw-r--r--drivers/usb/musb/sunxi.c29
-rw-r--r--drivers/usb/phy/phy-generic.c9
-rw-r--r--drivers/usb/phy/phy-jz4770.c25
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c4
-rw-r--r--drivers/usb/phy/phy-tegra-usb.c14
-rw-r--r--drivers/usb/serial/console.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c485
-rw-r--r--drivers/usb/serial/ftdi_sio.h22
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h7
-rw-r--r--drivers/usb/serial/qcserial.c1
-rw-r--r--drivers/usb/storage/onetouch.c2
-rw-r--r--drivers/usb/storage/unusual_devs.h6
-rw-r--r--drivers/usb/typec/anx7411.c4
-rw-r--r--drivers/usb/typec/mux.c4
-rw-r--r--drivers/usb/typec/qcom-pmic-typec.c5
-rw-r--r--drivers/usb/typec/retimer.c2
-rw-r--r--drivers/usb/typec/stusb160x.c7
-rw-r--r--drivers/usb/typec/tcpm/Kconfig11
-rw-r--r--drivers/usb/typec/tcpm/Makefile1
-rw-r--r--drivers/usb/typec/tcpm/fusb302.c7
-rw-r--r--drivers/usb/typec/tcpm/tcpci.c22
-rw-r--r--drivers/usb/typec/tcpm/tcpci_mt6370.c207
-rw-r--r--drivers/usb/typec/tcpm/tcpci_rt1711h.c150
-rw-r--r--drivers/usb/typec/ucsi/ucsi.c8
-rw-r--r--drivers/usb/typec/ucsi/ucsi_ccg.c12
-rw-r--r--drivers/usb/typec/ucsi/ucsi_stm32g0.c2
-rw-r--r--drivers/usb/usbip/stub_main.c2
-rw-r--r--drivers/usb/usbip/stub_rx.c4
-rw-r--r--drivers/usb/usbip/usbip_common.c91
-rw-r--r--include/linux/phy/tegra/xusb.h4
-rw-r--r--include/linux/platform_data/usb-s3c2410_udc.h6
-rw-r--r--include/linux/usb/chipidea.h1
-rw-r--r--include/linux/usb/hcd.h1
-rw-r--r--include/linux/usb/tcpci.h22
-rw-r--r--include/media/v4l2-common.h4
-rw-r--r--include/media/v4l2-uvc.h359
-rw-r--r--include/uapi/linux/usbip.h26
191 files changed, 4601 insertions, 2277 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index f7570c240ce8..76ab3e1fe374 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -153,7 +153,7 @@ Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports number of RX lanes the device is
- using simultaneusly through its upstream port.
+ using simultaneously through its upstream port.
What: /sys/bus/thunderbolt/devices/.../tx_speed
Date: Jan 2020
@@ -167,7 +167,7 @@ Date: Jan 2020
KernelVersion: 5.5
Contact: Mika Westerberg <mika.westerberg@linux.intel.com>
Description: This attribute reports number of TX lanes the device is
- using simultaneusly through its upstream port.
+ using simultaneously through its upstream port.
What: /sys/bus/thunderbolt/devices/.../vendor
Date: Sep 2017
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index c9e392c64a7c..70c813b0755f 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -15,10 +15,10 @@ Required properties:
- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
high-speed trimming resistor connected in parallel with the 45 ohm resistor
that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
high-speed trimming resistor connected in parallel with the 45 ohm resistor
that terminates the DP output signal. Default: 45
- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
index ee436308e5dc..0e72c08e6566 100644
--- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -23,6 +23,8 @@ properties:
connector:
type: object
$ref: ../connector/usb-connector.yaml
+ unevaluatedProperties: false
+
description:
Properties for usb c connector.
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
index 8b019ac05bbe..a86bcd95100e 100644
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -67,6 +67,7 @@ properties:
vhub-strings:
type: object
+ additionalProperties: false
properties:
'#address-cells':
@@ -78,6 +79,7 @@ properties:
patternProperties:
'^string@[0-9a-f]+$':
type: object
+ additionalProperties: false
description: string descriptors of the specific language
properties:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 1bfbc6ef16eb..dc4988c0009c 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -32,6 +32,7 @@ properties:
- enum:
- rockchip,px30-usb
- rockchip,rk3036-usb
+ - rockchip,rk3128-usb
- rockchip,rk3188-usb
- rockchip,rk3228-usb
- rockchip,rk3288-usb
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
deleted file mode 100644
index 06a2286e2054..000000000000
--- a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Faraday FOTG Host controller
-
-This OTG-capable USB host controller is found in Cortina Systems
-Gemini and other SoC products.
-
-Required properties:
-- compatible: should be one of:
- "faraday,fotg210"
- "cortina,gemini-usb", "faraday,fotg210"
-- reg: should contain one register range i.e. start and length
-- interrupts: description of the interrupt line
-
-Optional properties:
-- clocks: should contain the IP block clock
-- clock-names: should be "PCLK" for the IP block clock
-
-Required properties for "cortina,gemini-usb" compatible:
-- syscon: a phandle to the system controller to access PHY registers
-
-Optional properties for "cortina,gemini-usb" compatible:
-- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
- OTG connector is in use
-- wakeup-source: see power/wakeup-source.txt
-
-Example for Gemini:
-
-usb@68000000 {
- compatible = "cortina,gemini-usb", "faraday,fotg210";
- reg = <0x68000000 0x1000>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cc 12>;
- clock-names = "PCLK";
- syscon = <&syscon>;
- wakeup-source;
-};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
new file mode 100644
index 000000000000..c69bbfbcf733
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FOTG210 HS OTG USB 2.0 controller Bindings
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: usb-drd.yaml#
+ - $ref: usb-hcd.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: faraday,fotg210
+ - items:
+ - const: cortina,gemini-usb
+ - const: faraday,fotg210
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: PCLK
+
+ resets:
+ maxItems: 1
+
+ syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to the global Gemini system controller on
+ Gemini systems
+
+ dr_mode: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb2-phy
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/cortina,gemini-clock.h>
+ #include <dt-bindings/reset/cortina,gemini-reset.h>
+ usb0: usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_USB0>;
+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ dr_mode = "host";
+ };
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
new file mode 100644
index 000000000000..72f56cc88457
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ MediaTek MT6370 is a multi-functional device.
+ It integrates charger, ADC, flash, RGB indicators,
+ regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller.
+ This document only describes MT6370 Type-C Port Switch and
+ Power Delivery controller.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6370-tcpc
+
+ interrupts:
+ maxItems: 1
+
+ connector:
+ type: object
+ $ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
diff --git a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
index 5a0f1f14fbfa..352a0a1e2f76 100644
--- a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
@@ -5,7 +5,9 @@ EHCI:
-----
Required properties:
-- compatible: "nuvoton,npcm750-ehci"
+- compatible: should be one of
+ "nuvoton,npcm750-ehci"
+ "nuvoton,npcm845-ehci"
- interrupts: Should contain the EHCI interrupt
- reg: Physical address and length of the register set for the device
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index cd2f7cb6745a..a6e6abb4dfa9 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -26,6 +26,7 @@ properties:
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
- qcom,sdm660-dwc3
+ - qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
@@ -175,6 +176,7 @@ allOf:
- qcom,msm8998-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sm6350-dwc3
@@ -294,6 +296,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
@@ -344,11 +347,11 @@ allOf:
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
- qcom,sc7180-dwc3
+ - qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sm4250-dwc3
- - qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm6350-dwc3
- qcom,sm8150-dwc3
@@ -380,6 +383,7 @@ allOf:
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
+ - qcom,sm6115-dwc3
then:
properties:
interrupts:
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 9fcf54b10b07..55dfd121b555 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -11,27 +11,55 @@ maintainers:
properties:
compatible:
- items:
- - enum:
- - renesas,r8a774a1-usb3-peri # RZ/G2M
- - renesas,r8a774b1-usb3-peri # RZ/G2N
- - renesas,r8a774c0-usb3-peri # RZ/G2E
- - renesas,r8a774e1-usb3-peri # RZ/G2H
- - renesas,r8a7795-usb3-peri # R-Car H3
- - renesas,r8a7796-usb3-peri # R-Car M3-W
- - renesas,r8a77961-usb3-peri # R-Car M3-W+
- - renesas,r8a77965-usb3-peri # R-Car M3-N
- - renesas,r8a77990-usb3-peri # R-Car E3
- - const: renesas,rcar-gen3-usb3-peri
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r8a774a1-usb3-peri # RZ/G2M
+ - renesas,r8a774b1-usb3-peri # RZ/G2N
+ - renesas,r8a774c0-usb3-peri # RZ/G2E
+ - renesas,r8a774e1-usb3-peri # RZ/G2H
+ - renesas,r8a7795-usb3-peri # R-Car H3
+ - renesas,r8a7796-usb3-peri # R-Car M3-W
+ - renesas,r8a77961-usb3-peri # R-Car M3-W+
+ - renesas,r8a77965-usb3-peri # R-Car M3-N
+ - renesas,r8a77990-usb3-peri # R-Car E3
+ - const: renesas,rcar-gen3-usb3-peri
+
+ - items:
+ - enum:
+ - renesas,r9a09g011-usb3-peri # RZ/V2M
+ - const: renesas,rzv2m-usb3-peri
reg:
maxItems: 1
interrupts:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: Combined interrupt for DMA, SYS and ERR
+ - description: Dual Role Device (DRD)
+ - description: Battery Charging
+ - description: Global Purpose Input
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: all_p
+ - const: drd
+ - const: bc
+ - const: gpi
clocks:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: Main clock
+ - description: Register access clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: aclk
+ - const: reg
phys:
maxItems: 1
@@ -43,7 +71,15 @@ properties:
maxItems: 1
resets:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: Peripheral reset
+ - description: DRD reset
+
+ reset-names:
+ items:
+ - const: aresetn_p
+ - const: drd_reset
usb-role-switch:
$ref: /schemas/types.yaml#/definitions/flag
@@ -78,6 +114,39 @@ required:
- interrupts
- clocks
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rzv2m-usb3-peri
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ minItems: 2
+ interrupts:
+ minItems: 4
+ interrupt-names:
+ minItems: 4
+ resets:
+ minItems: 2
+ required:
+ - clock-names
+ - interrupt-names
+ - resets
+ - reset-names
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+ interrupts:
+ maxItems: 1
+ resets:
+ maxItems: 1
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
new file mode 100644
index 000000000000..1999f614c89b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ The RT1711H is a USB Type-C controller that complies with the latest
+ USB Type-C and PD standards. It does the USB Type-C detection including attach
+ and orientation. It integrates the physical layer of the USB BMC power
+ delivery protocol to allow up to 100W of power. The BMC PD block enables full
+ support for alternative interfaces of the Type-C specification.
+
+properties:
+ compatible:
+ enum:
+ - richtek,rt1711h
+ - richtek,rt1715
+ description:
+ RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+
+ connector:
+ type: object
+ $ref: /schemas/connector/usb-connector.yaml#
+ description:
+ Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - connector
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 1779d08ba1c0..6d78048c4613 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -234,6 +234,18 @@ properties:
avoid -EPROTO errors with usbhid on some devices (Hikey 970).
type: boolean
+ snps,gfladj-refclk-lpm-sel-quirk:
+ description:
+ When set, run the SOF/ITP counter based on ref_clk.
+ type: boolean
+
+ snps,resume-hs-terminations:
+ description:
+ Fix the issue of HS terminations CRC error on resume by enabling this
+ quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
+ of resume. This option is to support certain legacy ULPI PHYs.
+ type: boolean
+
snps,is-utmi-l1-suspend:
description:
True when DWC3 asserts output signal utmi_l1_suspend_n, false when
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index b5a8c9814dd3..b8974807b666 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -33,6 +33,7 @@ properties:
connector:
type: object
$ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
properties:
compatible:
@@ -74,9 +75,14 @@ examples:
data-role = "dual";
typec-power-opmode = "default";
- port {
- typec_con_ep: endpoint {
- remote-endpoint = <&usbotg_hs_ep>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ typec_con_ep: endpoint {
+ remote-endpoint = <&usbotg_hs_ep>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
index c2b2243c7892..5aa4ffd67119 100644
--- a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
+++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
@@ -28,6 +28,7 @@ properties:
connector:
type: object
$ref: ../connector/usb-connector.yaml#
+ unevaluatedProperties: false
description:
The managed USB Type-C connector. Since WUSB3801 does not support
Power Delivery, the node should have the "pd-disable" property.
diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst
index 0b8541fda4d8..adc158967cc6 100644
--- a/Documentation/usb/usbip_protocol.rst
+++ b/Documentation/usb/usbip_protocol.rst
@@ -340,13 +340,12 @@ USBIP_CMD_SUBMIT:
| 0 | 20 | usbip_header_basic, 'command' shall be 0x00000001 |
+-----------+--------+---------------------------------------------------+
| 0x14 | 4 | transfer_flags: possible values depend on the |
-| | | URB transfer_flags (refer to URB doc in |
-| | | Documentation/driver-api/usb/URB.rst) |
-| | | but with URB_NO_TRANSFER_DMA_MAP masked. Refer to |
-| | | function usbip_pack_cmd_submit and function |
-| | | tweak_transfer_flags in drivers/usb/usbip/ |
-| | | usbip_common.c. The following fields may also ref |
-| | | to function usbip_pack_cmd_submit and URB doc |
+| | | USBIP_URB transfer_flags. |
+| | | Refer to include/uapi/linux/usbip.h and |
+| | | Documentation/driver-api/usb/URB.rst. |
+| | | Refer to usbip_pack_cmd_submit() and |
+| | | tweak_transfer_flags() in drivers/usb/usbip/ |
+| | | usbip_common.c. |
+-----------+--------+---------------------------------------------------+
| 0x18 | 4 | transfer_buffer_length: |
| | | use URB transfer_buffer_length |
diff --git a/MAINTAINERS b/MAINTAINERS
index 5beeea4fff5d..04b7e12ef719 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5921,10 +5921,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
F: drivers/usb/dwc2/
DESIGNWARE USB3 DRD IP DRIVER
-M: Felipe Balbi <balbi@kernel.org>
+M: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
L: linux-usb@vger.kernel.org
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
F: drivers/usb/dwc3/
DEVANTECH SRF ULTRASONIC RANGER IIO DRIVER
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
index abfdce765525..d50a81d85ae1 100644
--- a/arch/arm/mach-s3c/mach-gta02.c
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
/* Get PMU to set USB current limit accordingly. */
static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
.vbus_draw = gta02_udc_vbus_draw,
- .pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+static struct gpiod_lookup_table gta02_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/* USB */
@@ -555,6 +562,7 @@ static void __init gta02_machine_init(void)
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&gta02_udc_gpio_table);
gpiod_add_lookup_table(&gta02_audio_gpio_table);
gpiod_add_lookup_table(&gta02_mmc_gpio_table);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
index 032b18837855..83ac6cfdb1d8 100644
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = {
};
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = H1940_LATCH_USB_DP,
+};
+
+static struct gpiod_lookup_table h1940_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
@@ -725,6 +731,7 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ gpiod_add_lookup_table(&h1940_udc_gpio_table);
gpiod_add_lookup_table(&h1940_mmc_gpio_table);
gpiod_add_lookup_table(&h1940_audio_gpio_table);
gpiod_add_lookup_table(&h1940_bat_gpio_table);
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
index e32773175944..16859bb3bb13 100644
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
+};
+
+static struct gpiod_lookup_table jive_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/* Jive power management device */
@@ -669,6 +676,7 @@ static void __init jive_machine_init(void)
pm_power_off = jive_power_off;
+ gpiod_add_lookup_table(&jive_udc_gpio_table);
gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
index a6d17ffcdba1..283be70ca622 100644
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
/* USB device UDC support */
static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPC(5),
};
+static struct gpiod_lookup_table mini2440_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
/* LCD timing and setup */
@@ -755,6 +761,7 @@ static void __init mini2440_init(void)
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
+ gpiod_add_lookup_table(&mini2440_udc_gpio_table);
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
index 75f5dc6351a1..90122fc6b2aa 100644
--- a/arch/arm/mach-s3c/mach-n30.c
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
};
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1),
- .vbus_pin_inverted = 0,
- .pullup_pin = S3C2410_GPB(3),
+};
+
+static struct gpiod_lookup_table n30_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct gpio_keys_button n30_buttons[] = {
@@ -595,6 +601,7 @@ static void __init n30_init(void)
WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
s3c24xx_fb_set_platdata(&n30_fb_info);
+ gpiod_add_lookup_table(&n30_udc_gpio_table);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
gpiod_add_lookup_table(&n30_mci_gpio_table);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index 7a3e7c0a6484..d8c49e562660 100644
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct gpiod_lookup_table rx1950_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void)
gpio_direction_output(S3C2410_GPJ(6), 0);
pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+ gpiod_add_lookup_table(&rx1950_udc_gpio_table);
gpiod_add_lookup_table(&rx1950_audio_gpio_table);
gpiod_add_lookup_table(&rx1950_bat_gpio_table);
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
index f1f0ec174579..2b4e20aaa346 100644
--- a/arch/arm/mach-s3c/mach-smdk2413.c
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -12,7 +12,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
@@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPF(2),
};
+static struct gpiod_lookup_table smdk2413_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_ohci,
@@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
-
+ gpiod_add_lookup_table(&smdk2413_udc_gpio_table);
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 53493dc7d976..bb916a0948a8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1299,7 +1299,7 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u2-freeclk-exists-quirk;
+ snps,gfladj-refclk-lpm-sel-quirk;
};
};
@@ -1341,7 +1341,7 @@
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u2-freeclk-exists-quirk;
+ snps,gfladj-refclk-lpm-sel-quirk;
};
};
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index e012b21c4fd7..790787f0eba8 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -425,12 +425,14 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
- u16 frame_size = le16_to_cpu(
- fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
- int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
- frame_size, i, j, ret;
+ struct usb_host_interface *alt = fc_usb->uintf->cur_altsetting;
+ u16 frame_size;
+ int bufsize, i, j, ret;
int buffer_offset = 0;
+ frame_size = usb_endpoint_maxp(&alt->endpoint[0].desc);
+ bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size;
+
deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
B2C2_USB_NUM_ISO_URB,
B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
@@ -501,17 +503,21 @@ urb_error:
static int flexcop_usb_init(struct flexcop_usb *fc_usb)
{
- /* use the alternate setting with the larges buffer */
- int ret = usb_set_interface(fc_usb->udev, 0, 1);
+ struct usb_host_interface *alt;
+ int ret;
+ /* use the alternate setting with the largest buffer */
+ ret = usb_set_interface(fc_usb->udev, 0, 1);
if (ret) {
err("set interface failed.");
return ret;
}
- if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
+ alt = fc_usb->uintf->cur_altsetting;
+
+ if (alt->desc.bNumEndpoints < 1)
return -ENODEV;
- if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[0].desc))
+ if (!usb_endpoint_is_isoc_in(&alt->endpoint[0].desc))
return -ENODEV;
switch (fc_usb->udev->speed) {
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index 97f312020516..c95a2229f4fa 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -18,6 +18,7 @@
#include <linux/workqueue.h>
#include <linux/atomic.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-uvc.h>
#include "uvcvideo.h"
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 744051b52e12..215fb483efb0 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -20,6 +20,7 @@
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-uvc.h>
#include "uvcvideo.h"
@@ -35,198 +36,6 @@ unsigned int uvc_dbg_param;
unsigned int uvc_timeout_param = UVC_CTRL_STREAMING_TIMEOUT;
/* ------------------------------------------------------------------------
- * Video formats
- */
-
-static struct uvc_format_desc uvc_fmts[] = {
- {
- .name = "YUV 4:2:2 (YUYV)",
- .guid = UVC_GUID_FORMAT_YUY2,
- .fcc = V4L2_PIX_FMT_YUYV,
- },
- {
- .name = "YUV 4:2:2 (YUYV)",
- .guid = UVC_GUID_FORMAT_YUY2_ISIGHT,
- .fcc = V4L2_PIX_FMT_YUYV,
- },
- {
- .name = "YUV 4:2:0 (NV12)",
- .guid = UVC_GUID_FORMAT_NV12,
- .fcc = V4L2_PIX_FMT_NV12,
- },
- {
- .name = "MJPEG",
- .guid = UVC_GUID_FORMAT_MJPEG,
- .fcc = V4L2_PIX_FMT_MJPEG,
- },
- {
- .name = "YVU 4:2:0 (YV12)",
- .guid = UVC_GUID_FORMAT_YV12,
- .fcc = V4L2_PIX_FMT_YVU420,
- },
- {
- .name = "YUV 4:2:0 (I420)",
- .guid = UVC_GUID_FORMAT_I420,
- .fcc = V4L2_PIX_FMT_YUV420,
- },
- {
- .name = "YUV 4:2:0 (M420)",
- .guid = UVC_GUID_FORMAT_M420,
- .fcc = V4L2_PIX_FMT_M420,
- },
- {
- .name = "YUV 4:2:2 (UYVY)",
- .guid = UVC_GUID_FORMAT_UYVY,
- .fcc = V4L2_PIX_FMT_UYVY,
- },
- {
- .name = "Greyscale 8-bit (Y800)",
- .guid = UVC_GUID_FORMAT_Y800,
- .fcc = V4L2_PIX_FMT_GREY,
- },
- {
- .name = "Greyscale 8-bit (Y8 )",
- .guid = UVC_GUID_FORMAT_Y8,
- .fcc = V4L2_PIX_FMT_GREY,
- },
- {
- .name = "Greyscale 8-bit (D3DFMT_L8)",
- .guid = UVC_GUID_FORMAT_D3DFMT_L8,
- .fcc = V4L2_PIX_FMT_GREY,
- },
- {
- .name = "IR 8-bit (L8_IR)",
- .guid = UVC_GUID_FORMAT_KSMEDIA_L8_IR,
- .fcc = V4L2_PIX_FMT_GREY,
- },
- {
- .name = "Greyscale 10-bit (Y10 )",
- .guid = UVC_GUID_FORMAT_Y10,
- .fcc = V4L2_PIX_FMT_Y10,
- },
- {
- .name = "Greyscale 12-bit (Y12 )",
- .guid = UVC_GUID_FORMAT_Y12,
- .fcc = V4L2_PIX_FMT_Y12,
- },
- {
- .name = "Greyscale 16-bit (Y16 )",
- .guid = UVC_GUID_FORMAT_Y16,
- .fcc = V4L2_PIX_FMT_Y16,
- },
- {
- .name = "BGGR Bayer (BY8 )",
- .guid = UVC_GUID_FORMAT_BY8,
- .fcc = V4L2_PIX_FMT_SBGGR8,
- },
- {
- .name = "BGGR Bayer (BA81)",
- .guid = UVC_GUID_FORMAT_BA81,
- .fcc = V4L2_PIX_FMT_SBGGR8,
- },
- {
- .name = "GBRG Bayer (GBRG)",
- .guid = UVC_GUID_FORMAT_GBRG,
- .fcc = V4L2_PIX_FMT_SGBRG8,
- },
- {
- .name = "GRBG Bayer (GRBG)",
- .guid = UVC_GUID_FORMAT_GRBG,
- .fcc = V4L2_PIX_FMT_SGRBG8,
- },
- {
- .name = "RGGB Bayer (RGGB)",
- .guid = UVC_GUID_FORMAT_RGGB,
- .fcc = V4L2_PIX_FMT_SRGGB8,
- },
- {
- .name = "RGB565",
- .guid = UVC_GUID_FORMAT_RGBP,
- .fcc = V4L2_PIX_FMT_RGB565,
- },
- {
- .name = "BGR 8:8:8 (BGR3)",
- .guid = UVC_GUID_FORMAT_BGR3,
- .fcc = V4L2_PIX_FMT_BGR24,
- },
- {
- .name = "H.264",
- .guid = UVC_GUID_FORMAT_H264,
- .fcc = V4L2_PIX_FMT_H264,
- },
- {
- .name = "H.265",
- .guid = UVC_GUID_FORMAT_H265,
- .fcc = V4L2_PIX_FMT_HEVC,
- },
- {
- .name = "Greyscale 8 L/R (Y8I)",
- .guid = UVC_GUID_FORMAT_Y8I,
- .fcc = V4L2_PIX_FMT_Y8I,
- },
- {
- .name = "Greyscale 12 L/R (Y12I)",
- .guid = UVC_GUID_FORMAT_Y12I,
- .fcc = V4L2_PIX_FMT_Y12I,
- },
- {
- .name = "Depth data 16-bit (Z16)",
- .guid = UVC_GUID_FORMAT_Z16,
- .fcc = V4L2_PIX_FMT_Z16,
- },
- {
- .name = "Bayer 10-bit (SRGGB10P)",
- .guid = UVC_GUID_FORMAT_RW10,
- .fcc = V4L2_PIX_FMT_SRGGB10P,
- },
- {
- .name = "Bayer 16-bit (SBGGR16)",
- .guid = UVC_GUID_FORMAT_BG16,
- .fcc = V4L2_PIX_FMT_SBGGR16,
- },
- {
- .name = "Bayer 16-bit (SGBRG16)",
- .guid = UVC_GUID_FORMAT_GB16,
- .fcc = V4L2_PIX_FMT_SGBRG16,
- },
- {
- .name = "Bayer 16-bit (SRGGB16)",
- .guid = UVC_GUID_FORMAT_RG16,
- .fcc = V4L2_PIX_FMT_SRGGB16,
- },
- {
- .name = "Bayer 16-bit (SGRBG16)",
- .guid = UVC_GUID_FORMAT_GR16,
- .fcc = V4L2_PIX_FMT_SGRBG16,
- },
- {
- .name = "Depth data 16-bit (Z16)",
- .guid = UVC_GUID_FORMAT_INVZ,
- .fcc = V4L2_PIX_FMT_Z16,
- },
- {
- .name = "Greyscale 10-bit (Y10 )",
- .guid = UVC_GUID_FORMAT_INVI,
- .fcc = V4L2_PIX_FMT_Y10,
- },
- {
- .name = "IR:Depth 26-bit (INZI)",
- .guid = UVC_GUID_FORMAT_INZI,
- .fcc = V4L2_PIX_FMT_INZI,
- },
- {
- .name = "4-bit Depth Confidence (Packed)",
- .guid = UVC_GUID_FORMAT_CNF4,
- .fcc = V4L2_PIX_FMT_CNF4,
- },
- {
- .name = "HEVC",
- .guid = UVC_GUID_FORMAT_HEVC,
- .fcc = V4L2_PIX_FMT_HEVC,
- },
-};
-
-/* ------------------------------------------------------------------------
* Utility functions
*/
@@ -245,19 +54,6 @@ struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
return NULL;
}
-static struct uvc_format_desc *uvc_format_by_guid(const u8 guid[16])
-{
- unsigned int len = ARRAY_SIZE(uvc_fmts);
- unsigned int i;
-
- for (i = 0; i < len; ++i) {
- if (memcmp(guid, uvc_fmts[i].guid, 16) == 0)
- return &uvc_fmts[i];
- }
-
- return NULL;
-}
-
static enum v4l2_colorspace uvc_colorspace(const u8 primaries)
{
static const enum v4l2_colorspace colorprimaries[] = {
@@ -329,90 +125,6 @@ static enum v4l2_ycbcr_encoding uvc_ycbcr_enc(const u8 matrix_coefficients)
return V4L2_YCBCR_ENC_DEFAULT; /* Reserved */
}
-/*
- * Simplify a fraction using a simple continued fraction decomposition. The
- * idea here is to convert fractions such as 333333/10000000 to 1/30 using
- * 32 bit arithmetic only. The algorithm is not perfect and relies upon two
- * arbitrary parameters to remove non-significative terms from the simple
- * continued fraction decomposition. Using 8 and 333 for n_terms and threshold
- * respectively seems to give nice results.
- */
-void uvc_simplify_fraction(u32 *numerator, u32 *denominator,
- unsigned int n_terms, unsigned int threshold)
-{
- u32 *an;
- u32 x, y, r;
- unsigned int i, n;
-
- an = kmalloc_array(n_terms, sizeof(*an), GFP_KERNEL);
- if (an == NULL)
- return;
-
- /*
- * Convert the fraction to a simple continued fraction. See
- * https://en.wikipedia.org/wiki/Continued_fraction
- * Stop if the current term is bigger than or equal to the given
- * threshold.
- */
- x = *numerator;
- y = *denominator;
-
- for (n = 0; n < n_terms && y != 0; ++n) {
- an[n] = x / y;
- if (an[n] >= threshold) {
- if (n < 2)
- n++;
- break;
- }
-
- r = x - an[n] * y;
- x = y;
- y = r;
- }
-
- /* Expand the simple continued fraction back to an integer fraction. */
- x = 0;
- y = 1;
-
- for (i = n; i > 0; --i) {
- r = y;
- y = an[i-1] * y + x;
- x = r;
- }
-
- *numerator = y;
- *denominator = x;
- kfree(an);
-}
-
-/*
- * Convert a fraction to a frame interval in 100ns multiples. The idea here is
- * to compute numerator / denominator * 10000000 using 32 bit fixed point
- * arithmetic only.
- */
-u32 uvc_fraction_to_interval(u32 numerator, u32 denominator)
-{
- u32 multiplier;
-
- /* Saturate the result if the operation would overflow. */
- if (denominator == 0 ||
- numerator/denominator >= ((u32)-1)/10000000)
- return (u32)-1;
-
- /*
- * Divide both the denominator and the multiplier by two until
- * numerator * multiplier doesn't overflow. If anyone knows a better
- * algorithm please let me know.
- */
- multiplier = 10000000;
- while (numerator > ((u32)-1)/multiplier) {
- multiplier /= 2;
- denominator /= 2;
- }
-
- return denominator ? numerator * multiplier / denominator : 0;
-}
-
/* ------------------------------------------------------------------------
* Terminal and unit management
*/
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 4cc3fa6b8c98..f4d4c33b6dfb 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -386,7 +386,7 @@ static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
mutex_unlock(&stream->mutex);
denominator = 10000000;
- uvc_simplify_fraction(&numerator, &denominator, 8, 333);
+ v4l2_simplify_fraction(&numerator, &denominator, 8, 333);
memset(parm, 0, sizeof(*parm));
parm->type = stream->type;
@@ -427,7 +427,7 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
else
timeperframe = parm->parm.output.timeperframe;
- interval = uvc_fraction_to_interval(timeperframe.numerator,
+ interval = v4l2_fraction_to_interval(timeperframe.numerator,
timeperframe.denominator);
uvc_dbg(stream->dev, FORMAT, "Setting frame interval to %u/%u (%u)\n",
timeperframe.numerator, timeperframe.denominator, interval);
@@ -481,7 +481,7 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
/* Return the actual frame period. */
timeperframe.numerator = probe.dwFrameInterval;
timeperframe.denominator = 10000000;
- uvc_simplify_fraction(&timeperframe.numerator,
+ v4l2_simplify_fraction(&timeperframe.numerator,
&timeperframe.denominator, 8, 333);
if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
@@ -1275,7 +1275,7 @@ static int uvc_ioctl_enum_frameintervals(struct file *file, void *fh,
fival->discrete.numerator =
frame->dwFrameInterval[index];
fival->discrete.denominator = 10000000;
- uvc_simplify_fraction(&fival->discrete.numerator,
+ v4l2_simplify_fraction(&fival->discrete.numerator,
&fival->discrete.denominator, 8, 333);
} else {
fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
@@ -1285,11 +1285,11 @@ static int uvc_ioctl_enum_frameintervals(struct file *file, void *fh,
fival->stepwise.max.denominator = 10000000;
fival->stepwise.step.numerator = frame->dwFrameInterval[2];
fival->stepwise.step.denominator = 10000000;
- uvc_simplify_fraction(&fival->stepwise.min.numerator,
+ v4l2_simplify_fraction(&fival->stepwise.min.numerator,
&fival->stepwise.min.denominator, 8, 333);
- uvc_simplify_fraction(&fival->stepwise.max.numerator,
+ v4l2_simplify_fraction(&fival->stepwise.max.numerator,
&fival->stepwise.max.denominator, 8, 333);
- uvc_simplify_fraction(&fival->stepwise.step.numerator,
+ v4l2_simplify_fraction(&fival->stepwise.step.numerator,
&fival->stepwise.step.denominator, 8, 333);
}
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index 24c911aeebce..df93db259312 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -42,144 +42,6 @@
#define UVC_EXT_GPIO_UNIT_ID 0x100
/* ------------------------------------------------------------------------
- * GUIDs
- */
-#define UVC_GUID_UVC_CAMERA \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}
-#define UVC_GUID_UVC_OUTPUT \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02}
-#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
-#define UVC_GUID_UVC_PROCESSING \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01}
-#define UVC_GUID_UVC_SELECTOR \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02}
-#define UVC_GUID_EXT_GPIO_CONTROLLER \
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03}
-
-#define UVC_GUID_FORMAT_MJPEG \
- { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_YUY2 \
- { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_YUY2_ISIGHT \
- { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_NV12 \
- { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_YV12 \
- { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_I420 \
- { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_UYVY \
- { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y800 \
- { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y8 \
- { 'Y', '8', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y10 \
- { 'Y', '1', '0', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y12 \
- { 'Y', '1', '2', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y16 \
- { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_BY8 \
- { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_BA81 \
- { 'B', 'A', '8', '1', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_GBRG \
- { 'G', 'B', 'R', 'G', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_GRBG \
- { 'G', 'R', 'B', 'G', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_RGGB \
- { 'R', 'G', 'G', 'B', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_BG16 \
- { 'B', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_GB16 \
- { 'G', 'B', '1', '6', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_RG16 \
- { 'R', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_GR16 \
- { 'G', 'R', '1', '6', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_RGBP \
- { 'R', 'G', 'B', 'P', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_BGR3 \
- { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \
- 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70}
-#define UVC_GUID_FORMAT_M420 \
- { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-
-#define UVC_GUID_FORMAT_H264 \
- { 'H', '2', '6', '4', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_H265 \
- { 'H', '2', '6', '5', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y8I \
- { 'Y', '8', 'I', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Y12I \
- { 'Y', '1', '2', 'I', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_Z16 \
- { 'Z', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_RW10 \
- { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_INVZ \
- { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \
- 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b}
-#define UVC_GUID_FORMAT_INZI \
- { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \
- 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a}
-#define UVC_GUID_FORMAT_INVI \
- { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \
- 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f}
-#define UVC_GUID_FORMAT_CNF4 \
- { 'C', ' ', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-
-#define UVC_GUID_FORMAT_D3DFMT_L8 \
- {0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-#define UVC_GUID_FORMAT_KSMEDIA_L8_IR \
- {0x32, 0x00, 0x00, 0x00, 0x02, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-
-#define UVC_GUID_FORMAT_HEVC \
- { 'H', 'E', 'V', 'C', 0x00, 0x00, 0x10, 0x00, \
- 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
-
-
-/* ------------------------------------------------------------------------
* Driver specific constants.
*/
@@ -283,12 +145,6 @@ struct uvc_control {
struct uvc_fh *handle; /* File handle that last changed the control. */
};
-struct uvc_format_desc {
- char *name;
- u8 guid[16];
- u32 fcc;
-};
-
/*
* The term 'entity' refers to both UVC units and UVC terminals.
*
@@ -911,9 +767,6 @@ int uvc_xu_ctrl_query(struct uvc_video_chain *chain,
struct uvc_xu_control_query *xqry);
/* Utility functions */
-void uvc_simplify_fraction(u32 *numerator, u32 *denominator,
- unsigned int n_terms, unsigned int threshold);
-u32 uvc_fraction_to_interval(u32 numerator, u32 denominator);
struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
u8 epaddr);
u16 uvc_endpoint_max_bpi(struct usb_device *dev, struct usb_host_endpoint *ep);
diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index e0fbe6ba4b6c..40f56e044640 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -484,3 +484,89 @@ s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul,
return freq > 0 ? freq : -EINVAL;
}
EXPORT_SYMBOL_GPL(v4l2_get_link_freq);
+
+/*
+ * Simplify a fraction using a simple continued fraction decomposition. The
+ * idea here is to convert fractions such as 333333/10000000 to 1/30 using
+ * 32 bit arithmetic only. The algorithm is not perfect and relies upon two
+ * arbitrary parameters to remove non-significative terms from the simple
+ * continued fraction decomposition. Using 8 and 333 for n_terms and threshold
+ * respectively seems to give nice results.
+ */
+void v4l2_simplify_fraction(u32 *numerator, u32 *denominator,
+ unsigned int n_terms, unsigned int threshold)
+{
+ u32 *an;
+ u32 x, y, r;
+ unsigned int i, n;
+
+ an = kmalloc_array(n_terms, sizeof(*an), GFP_KERNEL);
+ if (an == NULL)
+ return;
+
+ /*
+ * Convert the fraction to a simple continued fraction. See
+ * https://en.wikipedia.org/wiki/Continued_fraction
+ * Stop if the current term is bigger than or equal to the given
+ * threshold.
+ */
+ x = *numerator;
+ y = *denominator;
+
+ for (n = 0; n < n_terms && y != 0; ++n) {
+ an[n] = x / y;
+ if (an[n] >= threshold) {
+ if (n < 2)
+ n++;
+ break;
+ }
+
+ r = x - an[n] * y;
+ x = y;
+ y = r;
+ }
+
+ /* Expand the simple continued fraction back to an integer fraction. */
+ x = 0;
+ y = 1;
+
+ for (i = n; i > 0; --i) {
+ r = y;
+ y = an[i-1] * y + x;
+ x = r;
+ }
+
+ *numerator = y;
+ *denominator = x;
+ kfree(an);
+}
+EXPORT_SYMBOL_GPL(v4l2_simplify_fraction);
+
+/*
+ * Convert a fraction to a frame interval in 100ns multiples. The idea here is
+ * to compute numerator / denominator * 10000000 using 32 bit fixed point
+ * arithmetic only.
+ */
+u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator)
+{
+ u32 multiplier;
+
+ /* Saturate the result if the operation would overflow. */
+ if (denominator == 0 ||
+ numerator/denominator >= ((u32)-1)/10000000)
+ return (u32)-1;
+
+ /*
+ * Divide both the denominator and the multiplier by two until
+ * numerator * multiplier doesn't overflow. If anyone knows a better
+ * algorithm please let me know.
+ */
+ multiplier = 10000000;
+ while (numerator > ((u32)-1)/multiplier) {
+ multiplier /= 2;
+ denominator /= 2;
+ }
+
+ return denominator ? numerator * multiplier / denominator : 0;
+}
+EXPORT_SYMBOL_GPL(v4l2_fraction_to_interval);
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f1643fb7d351..0996ede63387 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2022, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/delay.h>
@@ -638,7 +638,7 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
mutex_unlock(&padctl->lock);
}
-static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
+static void tegra186_utmi_pad_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
@@ -656,6 +656,8 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
return;
}
+ dev_dbg(dev, "power on UTMI pad %u\n", index);
+
tegra186_utmi_bias_pad_power_on(padctl);
udelay(2);
@@ -669,7 +671,7 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
}
-static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
+static void tegra186_utmi_pad_power_down(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
@@ -679,6 +681,8 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
if (!phy)
return;
+ dev_dbg(padctl->dev, "power down UTMI pad %u\n", index);
+
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value |= USB2_OTG_PD;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -849,15 +853,14 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
- /* TODO: pad power saving */
- tegra_phy_xusb_utmi_pad_power_on(phy);
+ tegra186_utmi_pad_power_on(phy);
+
return 0;
}
static int tegra186_utmi_phy_power_off(struct phy *phy)
{
- /* TODO: pad power saving */
- tegra_phy_xusb_utmi_pad_power_down(phy);
+ tegra186_utmi_pad_power_down(phy);
return 0;
}
@@ -1483,6 +1486,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
.suspend_noirq = tegra186_xusb_padctl_suspend_noirq,
.resume_noirq = tegra186_xusb_padctl_resume_noirq,
.vbus_override = tegra186_xusb_padctl_vbus_override,
+ .utmi_pad_power_on = tegra186_utmi_pad_power_on,
+ .utmi_pad_power_down = tegra186_utmi_pad_power_down,
};
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 82fff4d9f4e6..95091876c422 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/delay.h>
@@ -1459,6 +1459,26 @@ int tegra_phy_xusb_utmi_port_reset(struct phy *phy)
}
EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_port_reset);
+void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+ struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+ if (padctl->soc->ops->utmi_pad_power_on)
+ padctl->soc->ops->utmi_pad_power_on(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_pad_power_on);
+
+void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+ struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+ if (padctl->soc->ops->utmi_pad_power_down)
+ padctl->soc->ops->utmi_pad_power_down(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_pad_power_down);
+
int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl,
unsigned int port)
{
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 034f7a2c28d6..8cfbbdbd6e0c 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2014-2020, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2015, Google Inc.
*/
@@ -412,6 +412,8 @@ struct tegra_xusb_padctl_ops {
unsigned int index, bool enable);
int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
int (*utmi_port_reset)(struct phy *phy);
+ void (*utmi_pad_power_on)(struct phy *phy);
+ void (*utmi_pad_power_down)(struct phy *phy);
};
struct tegra_xusb_padctl_soc {
diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig
index f12d0a3ee3e2..448fd2ec8f6e 100644
--- a/drivers/thunderbolt/Kconfig
+++ b/drivers/thunderbolt/Kconfig
@@ -27,6 +27,16 @@ config USB4_DEBUGFS_WRITE
Only enable this if you know what you are doing! Never enable
this for production systems or distro kernels.
+config USB4_DEBUGFS_MARGINING
+ bool "Expose receiver lane margining operations under USB4 ports (DANGEROUS)"
+ depends on DEBUG_FS
+ depends on USB4_DEBUGFS_WRITE
+ help
+ Enables hardware and software based receiver lane margining support
+ under each USB4 port. Used for electrical quality and robustness
+ validation during manufacturing. Should not be enabled by distro
+ kernels.
+
config USB4_KUNIT_TEST
bool "KUnit tests" if !KUNIT_ALL_TESTS
depends on USB4 && KUNIT=y
diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c
index c850b0ac098c..834bcad42e9f 100644
--- a/drivers/thunderbolt/debugfs.c
+++ b/drivers/thunderbolt/debugfs.c
@@ -12,6 +12,7 @@
#include <linux/uaccess.h>
#include "tb.h"
+#include "sb_regs.h"
#define PORT_CAP_PCIE_LEN 1
#define PORT_CAP_POWER_LEN 2
@@ -187,6 +188,828 @@ static ssize_t switch_regs_write(struct file *file, const char __user *user_buf,
#define DEBUGFS_MODE 0400
#endif
+#if IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING)
+/**
+ * struct tb_margining - Lane margining support
+ * @caps: Port lane margining capabilities
+ * @results: Last lane margining results
+ * @lanes: %0, %1 or %7 (all)
+ * @min_ber_level: Minimum supported BER level contour value
+ * @max_ber_level: Maximum supported BER level contour value
+ * @ber_level: Current BER level contour value
+ * @voltage_steps: Number of mandatory voltage steps
+ * @max_voltage_offset: Maximum mandatory voltage offset (in mV)
+ * @time_steps: Number of time margin steps
+ * @max_time_offset: Maximum time margin offset (in mUI)
+ * @software: %true if software margining is used instead of hardware
+ * @time: %true if time margining is used instead of voltage
+ * @right_high: %false if left/low margin test is performed, %true if
+ * right/high
+ */
+struct tb_margining {
+ u32 caps[2];
+ u32 results[2];
+ unsigned int lanes;
+ unsigned int min_ber_level;
+ unsigned int max_ber_level;
+ unsigned int ber_level;
+ unsigned int voltage_steps;
+ unsigned int max_voltage_offset;
+ unsigned int time_steps;
+ unsigned int max_time_offset;
+ bool software;
+ bool time;
+ bool right_high;
+};
+
+static bool supports_software(const struct usb4_port *usb4)
+{
+ return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_MODES_SW;
+}
+
+static bool supports_hardware(const struct usb4_port *usb4)
+{
+ return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_MODES_HW;
+}
+
+static bool both_lanes(const struct usb4_port *usb4)
+{
+ return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_2_LANES;
+}
+
+static unsigned int independent_voltage_margins(const struct usb4_port *usb4)
+{
+ return (usb4->margining->caps[0] & USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK) >>
+ USB4_MARGIN_CAP_0_VOLTAGE_INDP_SHIFT;
+}
+
+static bool supports_time(const struct usb4_port *usb4)
+{
+ return usb4->margining->caps[0] & USB4_MARGIN_CAP_0_TIME;
+}
+
+/* Only applicable if supports_time() returns true */
+static unsigned int independent_time_margins(const struct usb4_port *usb4)
+{
+ return (usb4->margining->caps[1] & USB4_MARGIN_CAP_1_TIME_INDP_MASK) >>
+ USB4_MARGIN_CAP_1_TIME_INDP_SHIFT;
+}
+
+static ssize_t
+margining_ber_level_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ unsigned int val;
+ int ret = 0;
+ char *buf;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ if (usb4->margining->software) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf)) {
+ ret = PTR_ERR(buf);
+ goto out_unlock;
+ }
+
+ buf[count - 1] = '\0';
+
+ ret = kstrtouint(buf, 10, &val);
+ if (ret)
+ goto out_free;
+
+ if (val < usb4->margining->min_ber_level ||
+ val > usb4->margining->max_ber_level) {
+ ret = -EINVAL;
+ goto out_free;
+ }
+
+ usb4->margining->ber_level = val;
+
+out_free:
+ free_page((unsigned long)buf);
+out_unlock:
+ mutex_unlock(&tb->lock);
+
+ return ret < 0 ? ret : count;
+}
+
+static void ber_level_show(struct seq_file *s, unsigned int val)
+{
+ if (val % 2)
+ seq_printf(s, "3 * 1e%d (%u)\n", -12 + (val + 1) / 2, val);
+ else
+ seq_printf(s, "1e%d (%u)\n", -12 + val / 2, val);
+}
+
+static int margining_ber_level_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+
+ if (usb4->margining->software)
+ return -EINVAL;
+ ber_level_show(s, usb4->margining->ber_level);
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_ber_level);
+
+static int margining_caps_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ u32 cap0, cap1;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ /* Dump the raw caps first */
+ cap0 = usb4->margining->caps[0];
+ seq_printf(s, "0x%08x\n", cap0);
+ cap1 = usb4->margining->caps[1];
+ seq_printf(s, "0x%08x\n", cap1);
+
+ seq_printf(s, "# software margining: %s\n",
+ supports_software(usb4) ? "yes" : "no");
+ if (supports_hardware(usb4)) {
+ seq_puts(s, "# hardware margining: yes\n");
+ seq_puts(s, "# minimum BER level contour: ");
+ ber_level_show(s, usb4->margining->min_ber_level);
+ seq_puts(s, "# maximum BER level contour: ");
+ ber_level_show(s, usb4->margining->max_ber_level);
+ } else {
+ seq_puts(s, "# hardware margining: no\n");
+ }
+
+ seq_printf(s, "# both lanes simultaneously: %s\n",
+ both_lanes(usb4) ? "yes" : "no");
+ seq_printf(s, "# voltage margin steps: %u\n",
+ usb4->margining->voltage_steps);
+ seq_printf(s, "# maximum voltage offset: %u mV\n",
+ usb4->margining->max_voltage_offset);
+
+ switch (independent_voltage_margins(usb4)) {
+ case USB4_MARGIN_CAP_0_VOLTAGE_MIN:
+ seq_puts(s, "# returns minimum between high and low voltage margins\n");
+ break;
+ case USB4_MARGIN_CAP_0_VOLTAGE_HL:
+ seq_puts(s, "# returns high or low voltage margin\n");
+ break;
+ case USB4_MARGIN_CAP_0_VOLTAGE_BOTH:
+ seq_puts(s, "# returns both high and low margins\n");
+ break;
+ }
+
+ if (supports_time(usb4)) {
+ seq_puts(s, "# time margining: yes\n");
+ seq_printf(s, "# time margining is destructive: %s\n",
+ cap1 & USB4_MARGIN_CAP_1_TIME_DESTR ? "yes" : "no");
+
+ switch (independent_time_margins(usb4)) {
+ case USB4_MARGIN_CAP_1_TIME_MIN:
+ seq_puts(s, "# returns minimum between left and right time margins\n");
+ break;
+ case USB4_MARGIN_CAP_1_TIME_LR:
+ seq_puts(s, "# returns left or right margin\n");
+ break;
+ case USB4_MARGIN_CAP_1_TIME_BOTH:
+ seq_puts(s, "# returns both left and right margins\n");
+ break;
+ }
+
+ seq_printf(s, "# time margin steps: %u\n",
+ usb4->margining->time_steps);
+ seq_printf(s, "# maximum time offset: %u mUI\n",
+ usb4->margining->max_time_offset);
+ } else {
+ seq_puts(s, "# time margining: no\n");
+ }
+
+ mutex_unlock(&tb->lock);
+ return 0;
+}
+DEBUGFS_ATTR_RO(margining_caps);
+
+static ssize_t
+margining_lanes_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ int ret = 0;
+ char *buf;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ buf[count - 1] = '\0';
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_free;
+ }
+
+ if (!strcmp(buf, "0")) {
+ usb4->margining->lanes = 0;
+ } else if (!strcmp(buf, "1")) {
+ usb4->margining->lanes = 1;
+ } else if (!strcmp(buf, "all")) {
+ /* Needs to be supported */
+ if (both_lanes(usb4))
+ usb4->margining->lanes = 7;
+ else
+ ret = -EINVAL;
+ } else {
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&tb->lock);
+
+out_free:
+ free_page((unsigned long)buf);
+ return ret < 0 ? ret : count;
+}
+
+static int margining_lanes_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ unsigned int lanes;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ lanes = usb4->margining->lanes;
+ if (both_lanes(usb4)) {
+ if (!lanes)
+ seq_puts(s, "[0] 1 all\n");
+ else if (lanes == 1)
+ seq_puts(s, "0 [1] all\n");
+ else
+ seq_puts(s, "0 1 [all]\n");
+ } else {
+ if (!lanes)
+ seq_puts(s, "[0] 1\n");
+ else
+ seq_puts(s, "0 [1]\n");
+ }
+
+ mutex_unlock(&tb->lock);
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_lanes);
+
+static ssize_t margining_mode_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ int ret = 0;
+ char *buf;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ buf[count - 1] = '\0';
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_free;
+ }
+
+ if (!strcmp(buf, "software")) {
+ if (supports_software(usb4))
+ usb4->margining->software = true;
+ else
+ ret = -EINVAL;
+ } else if (!strcmp(buf, "hardware")) {
+ if (supports_hardware(usb4))
+ usb4->margining->software = false;
+ else
+ ret = -EINVAL;
+ } else {
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&tb->lock);
+
+out_free:
+ free_page((unsigned long)buf);
+ return ret ? ret : count;
+}
+
+static int margining_mode_show(struct seq_file *s, void *not_used)
+{
+ const struct tb_port *port = s->private;
+ const struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ const char *space = "";
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ if (supports_software(usb4)) {
+ if (usb4->margining->software)
+ seq_puts(s, "[software]");
+ else
+ seq_puts(s, "software");
+ space = " ";
+ }
+ if (supports_hardware(usb4)) {
+ if (usb4->margining->software)
+ seq_printf(s, "%shardware", space);
+ else
+ seq_printf(s, "%s[hardware]", space);
+ }
+
+ mutex_unlock(&tb->lock);
+
+ seq_puts(s, "\n");
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_mode);
+
+static int margining_run_write(void *data, u64 val)
+{
+ struct tb_port *port = data;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb_switch *sw = port->sw;
+ struct tb_margining *margining;
+ struct tb *tb = sw->tb;
+ int ret;
+
+ if (val != 1)
+ return -EINVAL;
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_rpm_put;
+ }
+
+ /*
+ * CL states may interfere with lane margining so inform the user know
+ * and bail out.
+ */
+ if (tb_port_is_clx_enabled(port, TB_CL1 | TB_CL2)) {
+ tb_port_warn(port,
+ "CL states are enabled, Disable them with clx=0 and re-connect\n");
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ margining = usb4->margining;
+
+ if (margining->software) {
+ tb_port_dbg(port, "running software %s lane margining for lanes %u\n",
+ margining->time ? "time" : "voltage", margining->lanes);
+ ret = usb4_port_sw_margin(port, margining->lanes, margining->time,
+ margining->right_high,
+ USB4_MARGIN_SW_COUNTER_CLEAR);
+ if (ret)
+ goto out_unlock;
+
+ ret = usb4_port_sw_margin_errors(port, &margining->results[0]);
+ } else {
+ tb_port_dbg(port, "running hardware %s lane margining for lanes %u\n",
+ margining->time ? "time" : "voltage", margining->lanes);
+ /* Clear the results */
+ margining->results[0] = 0;
+ margining->results[1] = 0;
+ ret = usb4_port_hw_margin(port, margining->lanes,
+ margining->ber_level, margining->time,
+ margining->right_high, margining->results);
+ }
+
+out_unlock:
+ mutex_unlock(&tb->lock);
+out_rpm_put:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
+ return ret;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(margining_run_fops, NULL, margining_run_write,
+ "%llu\n");
+
+static ssize_t margining_results_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ /* Just clear the results */
+ usb4->margining->results[0] = 0;
+ usb4->margining->results[1] = 0;
+
+ mutex_unlock(&tb->lock);
+ return count;
+}
+
+static void voltage_margin_show(struct seq_file *s,
+ const struct tb_margining *margining, u8 val)
+{
+ unsigned int tmp, voltage;
+
+ tmp = val & USB4_MARGIN_HW_RES_1_MARGIN_MASK;
+ voltage = tmp * margining->max_voltage_offset / margining->voltage_steps;
+ seq_printf(s, "%u mV (%u)", voltage, tmp);
+ if (val & USB4_MARGIN_HW_RES_1_EXCEEDS)
+ seq_puts(s, " exceeds maximum");
+ seq_puts(s, "\n");
+}
+
+static void time_margin_show(struct seq_file *s,
+ const struct tb_margining *margining, u8 val)
+{
+ unsigned int tmp, interval;
+
+ tmp = val & USB4_MARGIN_HW_RES_1_MARGIN_MASK;
+ interval = tmp * margining->max_time_offset / margining->time_steps;
+ seq_printf(s, "%u mUI (%u)", interval, tmp);
+ if (val & USB4_MARGIN_HW_RES_1_EXCEEDS)
+ seq_puts(s, " exceeds maximum");
+ seq_puts(s, "\n");
+}
+
+static int margining_results_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb_margining *margining;
+ struct tb *tb = port->sw->tb;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ margining = usb4->margining;
+ /* Dump the raw results first */
+ seq_printf(s, "0x%08x\n", margining->results[0]);
+ /* Only the hardware margining has two result dwords */
+ if (!margining->software) {
+ unsigned int val;
+
+ seq_printf(s, "0x%08x\n", margining->results[1]);
+
+ if (margining->time) {
+ if (!margining->lanes || margining->lanes == 7) {
+ val = margining->results[1];
+ seq_puts(s, "# lane 0 right time margin: ");
+ time_margin_show(s, margining, val);
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT;
+ seq_puts(s, "# lane 0 left time margin: ");
+ time_margin_show(s, margining, val);
+ }
+ if (margining->lanes == 1 || margining->lanes == 7) {
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT;
+ seq_puts(s, "# lane 1 right time margin: ");
+ time_margin_show(s, margining, val);
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT;
+ seq_puts(s, "# lane 1 left time margin: ");
+ time_margin_show(s, margining, val);
+ }
+ } else {
+ if (!margining->lanes || margining->lanes == 7) {
+ val = margining->results[1];
+ seq_puts(s, "# lane 0 high voltage margin: ");
+ voltage_margin_show(s, margining, val);
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT;
+ seq_puts(s, "# lane 0 low voltage margin: ");
+ voltage_margin_show(s, margining, val);
+ }
+ if (margining->lanes == 1 || margining->lanes == 7) {
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT;
+ seq_puts(s, "# lane 1 high voltage margin: ");
+ voltage_margin_show(s, margining, val);
+ val = margining->results[1] >>
+ USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT;
+ seq_puts(s, "# lane 1 low voltage margin: ");
+ voltage_margin_show(s, margining, val);
+ }
+ }
+ }
+
+ mutex_unlock(&tb->lock);
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_results);
+
+static ssize_t margining_test_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ int ret = 0;
+ char *buf;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ buf[count - 1] = '\0';
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_free;
+ }
+
+ if (!strcmp(buf, "time") && supports_time(usb4))
+ usb4->margining->time = true;
+ else if (!strcmp(buf, "voltage"))
+ usb4->margining->time = false;
+ else
+ ret = -EINVAL;
+
+ mutex_unlock(&tb->lock);
+
+out_free:
+ free_page((unsigned long)buf);
+ return ret ? ret : count;
+}
+
+static int margining_test_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ if (supports_time(usb4)) {
+ if (usb4->margining->time)
+ seq_puts(s, "voltage [time]\n");
+ else
+ seq_puts(s, "[voltage] time\n");
+ } else {
+ seq_puts(s, "[voltage]\n");
+ }
+
+ mutex_unlock(&tb->lock);
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_test);
+
+static ssize_t margining_margin_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+ int ret = 0;
+ char *buf;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ buf[count - 1] = '\0';
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_free;
+ }
+
+ if (usb4->margining->time) {
+ if (!strcmp(buf, "left"))
+ usb4->margining->right_high = false;
+ else if (!strcmp(buf, "right"))
+ usb4->margining->right_high = true;
+ else
+ ret = -EINVAL;
+ } else {
+ if (!strcmp(buf, "low"))
+ usb4->margining->right_high = false;
+ else if (!strcmp(buf, "high"))
+ usb4->margining->right_high = true;
+ else
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&tb->lock);
+
+out_free:
+ free_page((unsigned long)buf);
+ return ret ? ret : count;
+}
+
+static int margining_margin_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct usb4_port *usb4 = port->usb4;
+ struct tb *tb = port->sw->tb;
+
+ if (mutex_lock_interruptible(&tb->lock))
+ return -ERESTARTSYS;
+
+ if (usb4->margining->time) {
+ if (usb4->margining->right_high)
+ seq_puts(s, "left [right]\n");
+ else
+ seq_puts(s, "[left] right\n");
+ } else {
+ if (usb4->margining->right_high)
+ seq_puts(s, "low [high]\n");
+ else
+ seq_puts(s, "[low] high\n");
+ }
+
+ mutex_unlock(&tb->lock);
+ return 0;
+}
+DEBUGFS_ATTR_RW(margining_margin);
+
+static void margining_port_init(struct tb_port *port)
+{
+ struct tb_margining *margining;
+ struct dentry *dir, *parent;
+ struct usb4_port *usb4;
+ char dir_name[10];
+ unsigned int val;
+ int ret;
+
+ usb4 = port->usb4;
+ if (!usb4)
+ return;
+
+ snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
+ parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
+
+ margining = kzalloc(sizeof(*margining), GFP_KERNEL);
+ if (!margining)
+ return;
+
+ ret = usb4_port_margining_caps(port, margining->caps);
+ if (ret) {
+ kfree(margining);
+ return;
+ }
+
+ usb4->margining = margining;
+
+ /* Set the initial mode */
+ if (supports_software(usb4))
+ margining->software = true;
+
+ val = (margining->caps[0] & USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK) >>
+ USB4_MARGIN_CAP_0_VOLTAGE_STEPS_SHIFT;
+ margining->voltage_steps = val;
+ val = (margining->caps[0] & USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK) >>
+ USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_SHIFT;
+ margining->max_voltage_offset = 74 + val * 2;
+
+ if (supports_time(usb4)) {
+ val = (margining->caps[1] & USB4_MARGIN_CAP_1_TIME_STEPS_MASK) >>
+ USB4_MARGIN_CAP_1_TIME_STEPS_SHIFT;
+ margining->time_steps = val;
+ val = (margining->caps[1] & USB4_MARGIN_CAP_1_TIME_OFFSET_MASK) >>
+ USB4_MARGIN_CAP_1_TIME_OFFSET_SHIFT;
+ /*
+ * Store it as mUI (milli Unit Interval) because we want
+ * to keep it as integer.
+ */
+ margining->max_time_offset = 200 + 10 * val;
+ }
+
+ dir = debugfs_create_dir("margining", parent);
+ if (supports_hardware(usb4)) {
+ val = (margining->caps[1] & USB4_MARGIN_CAP_1_MIN_BER_MASK) >>
+ USB4_MARGIN_CAP_1_MIN_BER_SHIFT;
+ margining->min_ber_level = val;
+ val = (margining->caps[1] & USB4_MARGIN_CAP_1_MAX_BER_MASK) >>
+ USB4_MARGIN_CAP_1_MAX_BER_SHIFT;
+ margining->max_ber_level = val;
+
+ /* Set the default to minimum */
+ margining->ber_level = margining->min_ber_level;
+
+ debugfs_create_file("ber_level_contour", 0400, dir, port,
+ &margining_ber_level_fops);
+ }
+ debugfs_create_file("caps", 0400, dir, port, &margining_caps_fops);
+ debugfs_create_file("lanes", 0600, dir, port, &margining_lanes_fops);
+ debugfs_create_file("mode", 0600, dir, port, &margining_mode_fops);
+ debugfs_create_file("run", 0600, dir, port, &margining_run_fops);
+ debugfs_create_file("results", 0600, dir, port, &margining_results_fops);
+ debugfs_create_file("test", 0600, dir, port, &margining_test_fops);
+ if (independent_voltage_margins(usb4) ||
+ (supports_time(usb4) && independent_time_margins(usb4)))
+ debugfs_create_file("margin", 0600, dir, port, &margining_margin_fops);
+}
+
+static void margining_port_remove(struct tb_port *port)
+{
+ struct dentry *parent;
+ char dir_name[10];
+
+ if (!port->usb4)
+ return;
+
+ snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
+ parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
+ debugfs_remove_recursive(debugfs_lookup("margining", parent));
+
+ kfree(port->usb4->margining);
+ port->usb4->margining = NULL;
+}
+
+static void margining_switch_init(struct tb_switch *sw)
+{
+ struct tb_port *upstream, *downstream;
+ struct tb_switch *parent_sw;
+ u64 route = tb_route(sw);
+
+ if (!route)
+ return;
+
+ upstream = tb_upstream_port(sw);
+ parent_sw = tb_switch_parent(sw);
+ downstream = tb_port_at(route, parent_sw);
+
+ margining_port_init(downstream);
+ margining_port_init(upstream);
+}
+
+static void margining_switch_remove(struct tb_switch *sw)
+{
+ struct tb_switch *parent_sw;
+ struct tb_port *downstream;
+ u64 route = tb_route(sw);
+
+ if (!route)
+ return;
+
+ /*
+ * Upstream is removed with the router itself but we need to
+ * remove the downstream port margining directory.
+ */
+ parent_sw = tb_switch_parent(sw);
+ downstream = tb_port_at(route, parent_sw);
+ margining_port_remove(downstream);
+}
+
+static void margining_xdomain_init(struct tb_xdomain *xd)
+{
+ struct tb_switch *parent_sw;
+ struct tb_port *downstream;
+
+ parent_sw = tb_xdomain_parent(xd);
+ downstream = tb_port_at(xd->route, parent_sw);
+
+ margining_port_init(downstream);
+}
+
+static void margining_xdomain_remove(struct tb_xdomain *xd)
+{
+ struct tb_switch *parent_sw;
+ struct tb_port *downstream;
+
+ parent_sw = tb_xdomain_parent(xd);
+ downstream = tb_port_at(xd->route, parent_sw);
+ margining_port_remove(downstream);
+}
+#else
+static inline void margining_switch_init(struct tb_switch *sw) { }
+static inline void margining_switch_remove(struct tb_switch *sw) { }
+static inline void margining_xdomain_init(struct tb_xdomain *xd) { }
+static inline void margining_xdomain_remove(struct tb_xdomain *xd) { }
+#endif
+
static int port_clear_all_counters(struct tb_port *port)
{
u32 *buf;
@@ -689,6 +1512,8 @@ void tb_switch_debugfs_init(struct tb_switch *sw)
debugfs_create_file("counters", 0600, debugfs_dir, port,
&counters_fops);
}
+
+ margining_switch_init(sw);
}
/**
@@ -699,9 +1524,20 @@ void tb_switch_debugfs_init(struct tb_switch *sw)
*/
void tb_switch_debugfs_remove(struct tb_switch *sw)
{
+ margining_switch_remove(sw);
debugfs_remove_recursive(sw->debugfs_dir);
}
+void tb_xdomain_debugfs_init(struct tb_xdomain *xd)
+{
+ margining_xdomain_init(xd);
+}
+
+void tb_xdomain_debugfs_remove(struct tb_xdomain *xd)
+{
+ margining_xdomain_remove(xd);
+}
+
/**
* tb_service_debugfs_init() - Add debugfs directory for service
* @svc: Thunderbolt service pointer
diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c
index 99211f35a5cd..ec7b5f65804e 100644
--- a/drivers/thunderbolt/domain.c
+++ b/drivers/thunderbolt/domain.c
@@ -144,11 +144,9 @@ static ssize_t boot_acl_show(struct device *dev, struct device_attribute *attr,
for (ret = 0, i = 0; i < tb->nboot_acl; i++) {
if (!uuid_is_null(&uuids[i]))
- ret += scnprintf(buf + ret, PAGE_SIZE - ret, "%pUb",
- &uuids[i]);
+ ret += sysfs_emit_at(buf, ret, "%pUb", &uuids[i]);
- ret += scnprintf(buf + ret, PAGE_SIZE - ret, "%s",
- i < tb->nboot_acl - 1 ? "," : "\n");
+ ret += sysfs_emit_at(buf, ret, "%s", i < tb->nboot_acl - 1 ? "," : "\n");
}
out:
@@ -247,7 +245,7 @@ static ssize_t deauthorization_show(struct device *dev,
tb->security_level == TB_SECURITY_SECURE)
deauthorization = !!tb->cm_ops->disapprove_switch;
- return sprintf(buf, "%d\n", deauthorization);
+ return sysfs_emit(buf, "%d\n", deauthorization);
}
static DEVICE_ATTR_RO(deauthorization);
@@ -270,7 +268,7 @@ static ssize_t security_show(struct device *dev, struct device_attribute *attr,
if (tb->security_level < ARRAY_SIZE(tb_security_names))
name = tb_security_names[tb->security_level];
- return sprintf(buf, "%s\n", name);
+ return sysfs_emit(buf, "%s\n", name);
}
static DEVICE_ATTR_RO(security);
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index 572b5896caa3..86521ebb2579 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -2518,6 +2518,9 @@ struct tb *icm_probe(struct tb_nhi *nhi)
case PCI_DEVICE_ID_INTEL_ADL_NHI1:
case PCI_DEVICE_ID_INTEL_RPL_NHI0:
case PCI_DEVICE_ID_INTEL_RPL_NHI1:
+ case PCI_DEVICE_ID_INTEL_MTL_M_NHI0:
+ case PCI_DEVICE_ID_INTEL_MTL_P_NHI0:
+ case PCI_DEVICE_ID_INTEL_MTL_P_NHI1:
icm->is_supported = icm_tgl_is_supported;
icm->driver_ready = icm_icl_driver_ready;
icm->set_uuid = icm_icl_set_uuid;
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index b5cd9673e15d..4dce2edd86ea 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1184,6 +1184,7 @@ static void nhi_check_iommu(struct tb_nhi *nhi)
static int nhi_init_msi(struct tb_nhi *nhi)
{
struct pci_dev *pdev = nhi->pdev;
+ struct device *dev = &pdev->dev;
int res, irq, nvec;
/* In case someone left them on. */
@@ -1214,10 +1215,8 @@ static int nhi_init_msi(struct tb_nhi *nhi)
res = devm_request_irq(&pdev->dev, irq, nhi_msi,
IRQF_NO_SUSPEND, "thunderbolt", nhi);
- if (res) {
- dev_err(&pdev->dev, "request_irq failed, aborting\n");
- return res;
- }
+ if (res)
+ return dev_err_probe(dev, res, "request_irq failed, aborting\n");
}
return 0;
@@ -1258,26 +1257,21 @@ static struct tb *nhi_select_cm(struct tb_nhi *nhi)
static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct device *dev = &pdev->dev;
struct tb_nhi *nhi;
struct tb *tb;
int res;
- if (!nhi_imr_valid(pdev)) {
- dev_warn(&pdev->dev, "firmware image not valid, aborting\n");
- return -ENODEV;
- }
+ if (!nhi_imr_valid(pdev))
+ return dev_err_probe(dev, -ENODEV, "firmware image not valid, aborting\n");
res = pcim_enable_device(pdev);
- if (res) {
- dev_err(&pdev->dev, "cannot enable PCI device, aborting\n");
- return res;
- }
+ if (res)
+ return dev_err_probe(dev, res, "cannot enable PCI device, aborting\n");
res = pcim_iomap_regions(pdev, 1 << 0, "thunderbolt");
- if (res) {
- dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n");
- return res;
- }
+ if (res)
+ return dev_err_probe(dev, res, "cannot obtain PCI resources, aborting\n");
nhi = devm_kzalloc(&pdev->dev, sizeof(*nhi), GFP_KERNEL);
if (!nhi)
@@ -1288,7 +1282,7 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* cannot fail - table is allocated in pcim_iomap_regions */
nhi->iobase = pcim_iomap_table(pdev)[0];
nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff;
- dev_dbg(&pdev->dev, "total paths: %d\n", nhi->hop_count);
+ dev_dbg(dev, "total paths: %d\n", nhi->hop_count);
nhi->tx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count,
sizeof(*nhi->tx_rings), GFP_KERNEL);
@@ -1301,18 +1295,14 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
nhi_check_iommu(nhi);
res = nhi_init_msi(nhi);
- if (res) {
- dev_err(&pdev->dev, "cannot enable MSI, aborting\n");
- return res;
- }
+ if (res)
+ return dev_err_probe(dev, res, "cannot enable MSI, aborting\n");
spin_lock_init(&nhi->lock);
res = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (res) {
- dev_err(&pdev->dev, "failed to set DMA mask\n");
- return res;
- }
+ if (res)
+ return dev_err_probe(dev, res, "failed to set DMA mask\n");
pci_set_master(pdev);
@@ -1323,13 +1313,11 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
tb = nhi_select_cm(nhi);
- if (!tb) {
- dev_err(&nhi->pdev->dev,
+ if (!tb)
+ return dev_err_probe(dev, -ENODEV,
"failed to determine connection manager, aborting\n");
- return -ENODEV;
- }
- dev_dbg(&nhi->pdev->dev, "NHI initialized, starting thunderbolt\n");
+ dev_dbg(dev, "NHI initialized, starting thunderbolt\n");
res = tb_domain_add(tb);
if (res) {
@@ -1433,6 +1421,7 @@ static struct pci_device_id nhi_ids[] = {
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
+ /* Thunderbolt 4 */
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI0),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL_NHI1),
@@ -1449,6 +1438,12 @@ static struct pci_device_id nhi_ids[] = {
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL_NHI1),
.driver_data = (kernel_ulong_t)&icl_nhi_ops },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_M_NHI0),
+ .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI0),
+ .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL_P_NHI1),
+ .driver_data = (kernel_ulong_t)&icl_nhi_ops },
/* Any USB4 compliant host */
{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) },
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 01190d9ced16..b0718020c6f5 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -75,6 +75,9 @@ extern const struct tb_nhi_ops icl_nhi_ops;
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE 0x15ef
#define PCI_DEVICE_ID_INTEL_ADL_NHI0 0x463e
#define PCI_DEVICE_ID_INTEL_ADL_NHI1 0x466d
+#define PCI_DEVICE_ID_INTEL_MTL_M_NHI0 0x7eb2
+#define PCI_DEVICE_ID_INTEL_MTL_P_NHI0 0x7ec2
+#define PCI_DEVICE_ID_INTEL_MTL_P_NHI1 0x7ec3
#define PCI_DEVICE_ID_INTEL_ICL_NHI1 0x8a0d
#define PCI_DEVICE_ID_INTEL_ICL_NHI0 0x8a17
#define PCI_DEVICE_ID_INTEL_TGL_NHI0 0x9a1b
diff --git a/drivers/thunderbolt/nvm.c b/drivers/thunderbolt/nvm.c
index b3f310389378..3dd5f81bd629 100644
--- a/drivers/thunderbolt/nvm.c
+++ b/drivers/thunderbolt/nvm.c
@@ -12,19 +12,315 @@
#include "tb.h"
+/* Intel specific NVM offsets */
+#define INTEL_NVM_DEVID 0x05
+#define INTEL_NVM_VERSION 0x08
+#define INTEL_NVM_CSS 0x10
+#define INTEL_NVM_FLASH_SIZE 0x45
+
+/* ASMedia specific NVM offsets */
+#define ASMEDIA_NVM_DATE 0x1c
+#define ASMEDIA_NVM_VERSION 0x28
+
static DEFINE_IDA(nvm_ida);
/**
+ * struct tb_nvm_vendor_ops - Vendor specific NVM operations
+ * @read_version: Reads out NVM version from the flash
+ * @validate: Validates the NVM image before update (optional)
+ * @write_headers: Writes headers before the rest of the image (optional)
+ */
+struct tb_nvm_vendor_ops {
+ int (*read_version)(struct tb_nvm *nvm);
+ int (*validate)(struct tb_nvm *nvm);
+ int (*write_headers)(struct tb_nvm *nvm);
+};
+
+/**
+ * struct tb_nvm_vendor - Vendor to &struct tb_nvm_vendor_ops mapping
+ * @vendor: Vendor ID
+ * @vops: Vendor specific NVM operations
+ *
+ * Maps vendor ID to NVM vendor operations. If there is no mapping then
+ * NVM firmware upgrade is disabled for the device.
+ */
+struct tb_nvm_vendor {
+ u16 vendor;
+ const struct tb_nvm_vendor_ops *vops;
+};
+
+static int intel_switch_nvm_version(struct tb_nvm *nvm)
+{
+ struct tb_switch *sw = tb_to_switch(nvm->dev);
+ u32 val, nvm_size, hdr_size;
+ int ret;
+
+ /*
+ * If the switch is in safe-mode the only accessible portion of
+ * the NVM is the non-active one where userspace is expected to
+ * write new functional NVM.
+ */
+ if (sw->safe_mode)
+ return 0;
+
+ ret = tb_switch_nvm_read(sw, INTEL_NVM_FLASH_SIZE, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ hdr_size = sw->generation < 3 ? SZ_8K : SZ_16K;
+ nvm_size = (SZ_1M << (val & 7)) / 8;
+ nvm_size = (nvm_size - hdr_size) / 2;
+
+ ret = tb_switch_nvm_read(sw, INTEL_NVM_VERSION, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ nvm->major = (val >> 16) & 0xff;
+ nvm->minor = (val >> 8) & 0xff;
+ nvm->active_size = nvm_size;
+
+ return 0;
+}
+
+static int intel_switch_nvm_validate(struct tb_nvm *nvm)
+{
+ struct tb_switch *sw = tb_to_switch(nvm->dev);
+ unsigned int image_size, hdr_size;
+ u16 ds_size, device_id;
+ u8 *buf = nvm->buf;
+
+ image_size = nvm->buf_data_size;
+
+ /*
+ * FARB pointer must point inside the image and must at least
+ * contain parts of the digital section we will be reading here.
+ */
+ hdr_size = (*(u32 *)buf) & 0xffffff;
+ if (hdr_size + INTEL_NVM_DEVID + 2 >= image_size)
+ return -EINVAL;
+
+ /* Digital section start should be aligned to 4k page */
+ if (!IS_ALIGNED(hdr_size, SZ_4K))
+ return -EINVAL;
+
+ /*
+ * Read digital section size and check that it also fits inside
+ * the image.
+ */
+ ds_size = *(u16 *)(buf + hdr_size);
+ if (ds_size >= image_size)
+ return -EINVAL;
+
+ if (sw->safe_mode)
+ return 0;
+
+ /*
+ * Make sure the device ID in the image matches the one
+ * we read from the switch config space.
+ */
+ device_id = *(u16 *)(buf + hdr_size + INTEL_NVM_DEVID);
+ if (device_id != sw->config.device_id)
+ return -EINVAL;
+
+ /* Skip headers in the image */
+ nvm->buf_data_start = buf + hdr_size;
+ nvm->buf_data_size = image_size - hdr_size;
+
+ return 0;
+}
+
+static int intel_switch_nvm_write_headers(struct tb_nvm *nvm)
+{
+ struct tb_switch *sw = tb_to_switch(nvm->dev);
+
+ if (sw->generation < 3) {
+ int ret;
+
+ /* Write CSS headers first */
+ ret = dma_port_flash_write(sw->dma_port,
+ DMA_PORT_CSS_ADDRESS, nvm->buf + INTEL_NVM_CSS,
+ DMA_PORT_CSS_MAX_SIZE);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct tb_nvm_vendor_ops intel_switch_nvm_ops = {
+ .read_version = intel_switch_nvm_version,
+ .validate = intel_switch_nvm_validate,
+ .write_headers = intel_switch_nvm_write_headers,
+};
+
+static int asmedia_switch_nvm_version(struct tb_nvm *nvm)
+{
+ struct tb_switch *sw = tb_to_switch(nvm->dev);
+ u32 val;
+ int ret;
+
+ ret = tb_switch_nvm_read(sw, ASMEDIA_NVM_VERSION, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ nvm->major = (val << 16) & 0xff0000;
+ nvm->major |= val & 0x00ff00;
+ nvm->major |= (val >> 16) & 0x0000ff;
+
+ ret = tb_switch_nvm_read(sw, ASMEDIA_NVM_DATE, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ nvm->minor = (val << 16) & 0xff0000;
+ nvm->minor |= val & 0x00ff00;
+ nvm->minor |= (val >> 16) & 0x0000ff;
+
+ /* ASMedia NVM size is fixed to 512k */
+ nvm->active_size = SZ_512K;
+
+ return 0;
+}
+
+static const struct tb_nvm_vendor_ops asmedia_switch_nvm_ops = {
+ .read_version = asmedia_switch_nvm_version,
+};
+
+/* Router vendor NVM support table */
+static const struct tb_nvm_vendor switch_nvm_vendors[] = {
+ { 0x174c, &asmedia_switch_nvm_ops },
+ { PCI_VENDOR_ID_INTEL, &intel_switch_nvm_ops },
+ { 0x8087, &intel_switch_nvm_ops },
+};
+
+static int intel_retimer_nvm_version(struct tb_nvm *nvm)
+{
+ struct tb_retimer *rt = tb_to_retimer(nvm->dev);
+ u32 val, nvm_size;
+ int ret;
+
+ ret = tb_retimer_nvm_read(rt, INTEL_NVM_VERSION, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ nvm->major = (val >> 16) & 0xff;
+ nvm->minor = (val >> 8) & 0xff;
+
+ ret = tb_retimer_nvm_read(rt, INTEL_NVM_FLASH_SIZE, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ nvm_size = (SZ_1M << (val & 7)) / 8;
+ nvm_size = (nvm_size - SZ_16K) / 2;
+ nvm->active_size = nvm_size;
+
+ return 0;
+}
+
+static int intel_retimer_nvm_validate(struct tb_nvm *nvm)
+{
+ struct tb_retimer *rt = tb_to_retimer(nvm->dev);
+ unsigned int image_size, hdr_size;
+ u8 *buf = nvm->buf;
+ u16 ds_size, device;
+
+ image_size = nvm->buf_data_size;
+
+ /*
+ * FARB pointer must point inside the image and must at least
+ * contain parts of the digital section we will be reading here.
+ */
+ hdr_size = (*(u32 *)buf) & 0xffffff;
+ if (hdr_size + INTEL_NVM_DEVID + 2 >= image_size)
+ return -EINVAL;
+
+ /* Digital section start should be aligned to 4k page */
+ if (!IS_ALIGNED(hdr_size, SZ_4K))
+ return -EINVAL;
+
+ /*
+ * Read digital section size and check that it also fits inside
+ * the image.
+ */
+ ds_size = *(u16 *)(buf + hdr_size);
+ if (ds_size >= image_size)
+ return -EINVAL;
+
+ /*
+ * Make sure the device ID in the image matches the retimer
+ * hardware.
+ */
+ device = *(u16 *)(buf + hdr_size + INTEL_NVM_DEVID);
+ if (device != rt->device)
+ return -EINVAL;
+
+ /* Skip headers in the image */
+ nvm->buf_data_start = buf + hdr_size;
+ nvm->buf_data_size = image_size - hdr_size;
+
+ return 0;
+}
+
+static const struct tb_nvm_vendor_ops intel_retimer_nvm_ops = {
+ .read_version = intel_retimer_nvm_version,
+ .validate = intel_retimer_nvm_validate,
+};
+
+/* Retimer vendor NVM support table */
+static const struct tb_nvm_vendor retimer_nvm_vendors[] = {
+ { 0x8087, &intel_retimer_nvm_ops },
+};
+
+/**
* tb_nvm_alloc() - Allocate new NVM structure
* @dev: Device owning the NVM
*
* Allocates new NVM structure with unique @id and returns it. In case
- * of error returns ERR_PTR().
+ * of error returns ERR_PTR(). Specifically returns %-EOPNOTSUPP if the
+ * NVM format of the @dev is not known by the kernel.
*/
struct tb_nvm *tb_nvm_alloc(struct device *dev)
{
+ const struct tb_nvm_vendor_ops *vops = NULL;
struct tb_nvm *nvm;
- int ret;
+ int ret, i;
+
+ if (tb_is_switch(dev)) {
+ const struct tb_switch *sw = tb_to_switch(dev);
+
+ for (i = 0; i < ARRAY_SIZE(switch_nvm_vendors); i++) {
+ const struct tb_nvm_vendor *v = &switch_nvm_vendors[i];
+
+ if (v->vendor == sw->config.vendor_id) {
+ vops = v->vops;
+ break;
+ }
+ }
+
+ if (!vops) {
+ tb_sw_dbg(sw, "router NVM format of vendor %#x unknown\n",
+ sw->config.vendor_id);
+ return ERR_PTR(-EOPNOTSUPP);
+ }
+ } else if (tb_is_retimer(dev)) {
+ const struct tb_retimer *rt = tb_to_retimer(dev);
+
+ for (i = 0; i < ARRAY_SIZE(retimer_nvm_vendors); i++) {
+ const struct tb_nvm_vendor *v = &retimer_nvm_vendors[i];
+
+ if (v->vendor == rt->vendor) {
+ vops = v->vops;
+ break;
+ }
+ }
+
+ if (!vops) {
+ dev_dbg(dev, "retimer NVM format of vendor %#x unknown\n",
+ rt->vendor);
+ return ERR_PTR(-EOPNOTSUPP);
+ }
+ } else {
+ return ERR_PTR(-EOPNOTSUPP);
+ }
nvm = kzalloc(sizeof(*nvm), GFP_KERNEL);
if (!nvm)
@@ -38,14 +334,85 @@ struct tb_nvm *tb_nvm_alloc(struct device *dev)
nvm->id = ret;
nvm->dev = dev;
+ nvm->vops = vops;
return nvm;
}
/**
+ * tb_nvm_read_version() - Read and populate NVM version
+ * @nvm: NVM structure
+ *
+ * Uses vendor specific means to read out and fill in the existing
+ * active NVM version. Returns %0 in case of success and negative errno
+ * otherwise.
+ */
+int tb_nvm_read_version(struct tb_nvm *nvm)
+{
+ const struct tb_nvm_vendor_ops *vops = nvm->vops;
+
+ if (vops && vops->read_version)
+ return vops->read_version(nvm);
+
+ return -EOPNOTSUPP;
+}
+
+/**
+ * tb_nvm_validate() - Validate new NVM image
+ * @nvm: NVM structure
+ *
+ * Runs vendor specific validation over the new NVM image and if all
+ * checks pass returns %0. As side effect updates @nvm->buf_data_start
+ * and @nvm->buf_data_size fields to match the actual data to be written
+ * to the NVM.
+ *
+ * If the validation does not pass then returns negative errno.
+ */
+int tb_nvm_validate(struct tb_nvm *nvm)
+{
+ const struct tb_nvm_vendor_ops *vops = nvm->vops;
+ unsigned int image_size;
+ u8 *buf = nvm->buf;
+
+ if (!buf)
+ return -EINVAL;
+ if (!vops)
+ return -EOPNOTSUPP;
+
+ /* Just do basic image size checks */
+ image_size = nvm->buf_data_size;
+ if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
+ return -EINVAL;
+
+ /*
+ * Set the default data start in the buffer. The validate method
+ * below can change this if needed.
+ */
+ nvm->buf_data_start = buf;
+
+ return vops->validate ? vops->validate(nvm) : 0;
+}
+
+/**
+ * tb_nvm_write_headers() - Write headers before the rest of the image
+ * @nvm: NVM structure
+ *
+ * If the vendor NVM format requires writing headers before the rest of
+ * the image, this function does that. Can be called even if the device
+ * does not need this.
+ *
+ * Returns %0 in case of success and negative errno otherwise.
+ */
+int tb_nvm_write_headers(struct tb_nvm *nvm)
+{
+ const struct tb_nvm_vendor_ops *vops = nvm->vops;
+
+ return vops->write_headers ? vops->write_headers(nvm) : 0;
+}
+
+/**
* tb_nvm_add_active() - Adds active NVMem device to NVM
* @nvm: NVM structure
- * @size: Size of the active NVM in bytes
* @reg_read: Pointer to the function to read the NVM (passed directly to the
* NVMem device)
*
@@ -54,7 +421,7 @@ struct tb_nvm *tb_nvm_alloc(struct device *dev)
* needed. The first parameter passed to @reg_read is @nvm structure.
* Returns %0 in success and negative errno otherwise.
*/
-int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read)
+int tb_nvm_add_active(struct tb_nvm *nvm, nvmem_reg_read_t reg_read)
{
struct nvmem_config config;
struct nvmem_device *nvmem;
@@ -67,7 +434,7 @@ int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read
config.id = nvm->id;
config.stride = 4;
config.word_size = 4;
- config.size = size;
+ config.size = nvm->active_size;
config.dev = nvm->dev;
config.owner = THIS_MODULE;
config.priv = nvm;
@@ -109,17 +476,17 @@ int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val,
/**
* tb_nvm_add_non_active() - Adds non-active NVMem device to NVM
* @nvm: NVM structure
- * @size: Size of the non-active NVM in bytes
* @reg_write: Pointer to the function to write the NVM (passed directly
* to the NVMem device)
*
* Registers new non-active NVmem device for @nvm. The @reg_write is called
* directly from NVMem so it must handle possible concurrent access if
* needed. The first parameter passed to @reg_write is @nvm structure.
+ * The size of the NVMem device is set to %NVM_MAX_SIZE.
+ *
* Returns %0 in success and negative errno otherwise.
*/
-int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size,
- nvmem_reg_write_t reg_write)
+int tb_nvm_add_non_active(struct tb_nvm *nvm, nvmem_reg_write_t reg_write)
{
struct nvmem_config config;
struct nvmem_device *nvmem;
@@ -132,7 +499,7 @@ int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size,
config.id = nvm->id;
config.stride = 4;
config.word_size = 4;
- config.size = size;
+ config.size = NVM_MAX_SIZE;
config.dev = nvm->dev;
config.owner = THIS_MODULE;
config.priv = nvm;
diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c
index 8c29bd556ae0..81252e31014a 100644
--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -16,8 +16,23 @@
#define TB_MAX_RETIMER_INDEX 6
-static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val,
- size_t bytes)
+/**
+ * tb_retimer_nvm_read() - Read contents of retimer NVM
+ * @rt: Retimer device
+ * @address: NVM address (in bytes) to start reading
+ * @buf: Data read from NVM is stored here
+ * @size: Number of bytes to read
+ *
+ * Reads retimer NVM and copies the contents to @buf. Returns %0 if the
+ * read was successful and negative errno in case of failure.
+ */
+int tb_retimer_nvm_read(struct tb_retimer *rt, unsigned int address, void *buf,
+ size_t size)
+{
+ return usb4_port_retimer_nvm_read(rt->port, rt->index, address, buf, size);
+}
+
+static int nvm_read(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct tb_nvm *nvm = priv;
struct tb_retimer *rt = tb_to_retimer(nvm->dev);
@@ -30,7 +45,7 @@ static int tb_retimer_nvm_read(void *priv, unsigned int offset, void *val,
goto out;
}
- ret = usb4_port_retimer_nvm_read(rt->port, rt->index, offset, val, bytes);
+ ret = tb_retimer_nvm_read(rt, offset, val, bytes);
mutex_unlock(&rt->tb->lock);
out:
@@ -40,8 +55,7 @@ out:
return ret;
}
-static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val,
- size_t bytes)
+static int nvm_write(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct tb_nvm *nvm = priv;
struct tb_retimer *rt = tb_to_retimer(nvm->dev);
@@ -59,34 +73,23 @@ static int tb_retimer_nvm_write(void *priv, unsigned int offset, void *val,
static int tb_retimer_nvm_add(struct tb_retimer *rt)
{
struct tb_nvm *nvm;
- u32 val, nvm_size;
int ret;
nvm = tb_nvm_alloc(&rt->dev);
- if (IS_ERR(nvm))
- return PTR_ERR(nvm);
-
- ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_VERSION, &val,
- sizeof(val));
- if (ret)
+ if (IS_ERR(nvm)) {
+ ret = PTR_ERR(nvm) == -EOPNOTSUPP ? 0 : PTR_ERR(nvm);
goto err_nvm;
+ }
- nvm->major = val >> 16;
- nvm->minor = val >> 8;
-
- ret = usb4_port_retimer_nvm_read(rt->port, rt->index, NVM_FLASH_SIZE,
- &val, sizeof(val));
+ ret = tb_nvm_read_version(nvm);
if (ret)
goto err_nvm;
- nvm_size = (SZ_1M << (val & 7)) / 8;
- nvm_size = (nvm_size - SZ_16K) / 2;
-
- ret = tb_nvm_add_active(nvm, nvm_size, tb_retimer_nvm_read);
+ ret = tb_nvm_add_active(nvm, nvm_read);
if (ret)
goto err_nvm;
- ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE, tb_retimer_nvm_write);
+ ret = tb_nvm_add_non_active(nvm, nvm_write);
if (ret)
goto err_nvm;
@@ -94,59 +97,33 @@ static int tb_retimer_nvm_add(struct tb_retimer *rt)
return 0;
err_nvm:
- tb_nvm_free(nvm);
+ dev_dbg(&rt->dev, "NVM upgrade disabled\n");
+ if (!IS_ERR(nvm))
+ tb_nvm_free(nvm);
+
return ret;
}
static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt)
{
- unsigned int image_size, hdr_size;
- const u8 *buf = rt->nvm->buf;
- u16 ds_size, device;
+ unsigned int image_size;
+ const u8 *buf;
int ret;
- image_size = rt->nvm->buf_data_size;
- if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
- return -EINVAL;
-
- /*
- * FARB pointer must point inside the image and must at least
- * contain parts of the digital section we will be reading here.
- */
- hdr_size = (*(u32 *)buf) & 0xffffff;
- if (hdr_size + NVM_DEVID + 2 >= image_size)
- return -EINVAL;
-
- /* Digital section start should be aligned to 4k page */
- if (!IS_ALIGNED(hdr_size, SZ_4K))
- return -EINVAL;
-
- /*
- * Read digital section size and check that it also fits inside
- * the image.
- */
- ds_size = *(u16 *)(buf + hdr_size);
- if (ds_size >= image_size)
- return -EINVAL;
-
- /*
- * Make sure the device ID in the image matches the retimer
- * hardware.
- */
- device = *(u16 *)(buf + hdr_size + NVM_DEVID);
- if (device != rt->device)
- return -EINVAL;
+ ret = tb_nvm_validate(rt->nvm);
+ if (ret)
+ return ret;
- /* Skip headers in the image */
- buf += hdr_size;
- image_size -= hdr_size;
+ buf = rt->nvm->buf_data_start;
+ image_size = rt->nvm->buf_data_size;
ret = usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf,
image_size);
- if (!ret)
- rt->nvm->flushed = true;
+ if (ret)
+ return ret;
- return ret;
+ rt->nvm->flushed = true;
+ return 0;
}
static int tb_retimer_nvm_authenticate(struct tb_retimer *rt, bool auth_only)
@@ -185,7 +162,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr,
{
struct tb_retimer *rt = tb_to_retimer(dev);
- return sprintf(buf, "%#x\n", rt->device);
+ return sysfs_emit(buf, "%#x\n", rt->device);
}
static DEVICE_ATTR_RO(device);
@@ -200,8 +177,10 @@ static ssize_t nvm_authenticate_show(struct device *dev,
if (!rt->nvm)
ret = -EAGAIN;
+ else if (rt->no_nvm_upgrade)
+ ret = -EOPNOTSUPP;
else
- ret = sprintf(buf, "%#x\n", rt->auth_status);
+ ret = sysfs_emit(buf, "%#x\n", rt->auth_status);
mutex_unlock(&rt->tb->lock);
@@ -276,7 +255,7 @@ static ssize_t nvm_version_show(struct device *dev,
if (!rt->nvm)
ret = -EAGAIN;
else
- ret = sprintf(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor);
+ ret = sysfs_emit(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor);
mutex_unlock(&rt->tb->lock);
return ret;
@@ -288,7 +267,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr,
{
struct tb_retimer *rt = tb_to_retimer(dev);
- return sprintf(buf, "%#x\n", rt->vendor);
+ return sysfs_emit(buf, "%#x\n", rt->vendor);
}
static DEVICE_ATTR_RO(vendor);
diff --git a/drivers/thunderbolt/sb_regs.h b/drivers/thunderbolt/sb_regs.h
index bda889ff3bda..5185cf3e4d97 100644
--- a/drivers/thunderbolt/sb_regs.h
+++ b/drivers/thunderbolt/sb_regs.h
@@ -26,10 +26,68 @@ enum usb4_sb_opcode {
USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42, /* "BLKW" */
USB4_SB_OPCODE_NVM_AUTH_WRITE = 0x48545541, /* "AUTH" */
USB4_SB_OPCODE_NVM_READ = 0x52524641, /* "AFRR" */
+ USB4_SB_OPCODE_READ_LANE_MARGINING_CAP = 0x50434452, /* "RDCP" */
+ USB4_SB_OPCODE_RUN_HW_LANE_MARGINING = 0x474d4852, /* "RHMG" */
+ USB4_SB_OPCODE_RUN_SW_LANE_MARGINING = 0x474d5352, /* "RSMG" */
+ USB4_SB_OPCODE_READ_SW_MARGIN_ERR = 0x57534452, /* "RDSW" */
};
#define USB4_SB_METADATA 0x09
#define USB4_SB_METADATA_NVM_AUTH_WRITE_MASK GENMASK(5, 0)
#define USB4_SB_DATA 0x12
+/* USB4_SB_OPCODE_READ_LANE_MARGINING_CAP */
+#define USB4_MARGIN_CAP_0_MODES_HW BIT(0)
+#define USB4_MARGIN_CAP_0_MODES_SW BIT(1)
+#define USB4_MARGIN_CAP_0_2_LANES BIT(2)
+#define USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK GENMASK(4, 3)
+#define USB4_MARGIN_CAP_0_VOLTAGE_INDP_SHIFT 3
+#define USB4_MARGIN_CAP_0_VOLTAGE_MIN 0x0
+#define USB4_MARGIN_CAP_0_VOLTAGE_HL 0x1
+#define USB4_MARGIN_CAP_0_VOLTAGE_BOTH 0x2
+#define USB4_MARGIN_CAP_0_TIME BIT(5)
+#define USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK GENMASK(12, 6)
+#define USB4_MARGIN_CAP_0_VOLTAGE_STEPS_SHIFT 6
+#define USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK GENMASK(18, 13)
+#define USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_SHIFT 13
+#define USB4_MARGIN_CAP_1_TIME_DESTR BIT(8)
+#define USB4_MARGIN_CAP_1_TIME_INDP_MASK GENMASK(10, 9)
+#define USB4_MARGIN_CAP_1_TIME_INDP_SHIFT 9
+#define USB4_MARGIN_CAP_1_TIME_MIN 0x0
+#define USB4_MARGIN_CAP_1_TIME_LR 0x1
+#define USB4_MARGIN_CAP_1_TIME_BOTH 0x2
+#define USB4_MARGIN_CAP_1_TIME_STEPS_MASK GENMASK(15, 11)
+#define USB4_MARGIN_CAP_1_TIME_STEPS_SHIFT 11
+#define USB4_MARGIN_CAP_1_TIME_OFFSET_MASK GENMASK(20, 16)
+#define USB4_MARGIN_CAP_1_TIME_OFFSET_SHIFT 16
+#define USB4_MARGIN_CAP_1_MIN_BER_MASK GENMASK(25, 21)
+#define USB4_MARGIN_CAP_1_MIN_BER_SHIFT 21
+#define USB4_MARGIN_CAP_1_MAX_BER_MASK GENMASK(30, 26)
+#define USB4_MARGIN_CAP_1_MAX_BER_SHIFT 26
+#define USB4_MARGIN_CAP_1_MAX_BER_SHIFT 26
+
+/* USB4_SB_OPCODE_RUN_HW_LANE_MARGINING */
+#define USB4_MARGIN_HW_TIME BIT(3)
+#define USB4_MARGIN_HW_RH BIT(4)
+#define USB4_MARGIN_HW_BER_MASK GENMASK(9, 5)
+#define USB4_MARGIN_HW_BER_SHIFT 5
+
+/* Applicable to all margin values */
+#define USB4_MARGIN_HW_RES_1_MARGIN_MASK GENMASK(6, 0)
+#define USB4_MARGIN_HW_RES_1_EXCEEDS BIT(7)
+/* Different lane margin shifts */
+#define USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT 8
+#define USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT 16
+#define USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT 24
+
+/* USB4_SB_OPCODE_RUN_SW_LANE_MARGINING */
+#define USB4_MARGIN_SW_TIME BIT(3)
+#define USB4_MARGIN_SW_RH BIT(4)
+#define USB4_MARGIN_SW_COUNTER_MASK GENMASK(14, 13)
+#define USB4_MARGIN_SW_COUNTER_SHIFT 13
+#define USB4_MARGIN_SW_COUNTER_NOP 0x0
+#define USB4_MARGIN_SW_COUNTER_CLEAR 0x1
+#define USB4_MARGIN_SW_COUNTER_START 0x2
+#define USB4_MARGIN_SW_COUNTER_STOP 0x3
+
#endif
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 77d7f07ca075..60da5c23ccaf 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -19,8 +19,6 @@
/* Switch NVM support */
-#define NVM_CSS 0x10
-
struct nvm_auth_status {
struct list_head list;
uuid_t uuid;
@@ -102,70 +100,30 @@ static void nvm_clear_auth_status(const struct tb_switch *sw)
static int nvm_validate_and_write(struct tb_switch *sw)
{
- unsigned int image_size, hdr_size;
- const u8 *buf = sw->nvm->buf;
- u16 ds_size;
+ unsigned int image_size;
+ const u8 *buf;
int ret;
- if (!buf)
- return -EINVAL;
-
- image_size = sw->nvm->buf_data_size;
- if (image_size < NVM_MIN_SIZE || image_size > NVM_MAX_SIZE)
- return -EINVAL;
-
- /*
- * FARB pointer must point inside the image and must at least
- * contain parts of the digital section we will be reading here.
- */
- hdr_size = (*(u32 *)buf) & 0xffffff;
- if (hdr_size + NVM_DEVID + 2 >= image_size)
- return -EINVAL;
-
- /* Digital section start should be aligned to 4k page */
- if (!IS_ALIGNED(hdr_size, SZ_4K))
- return -EINVAL;
-
- /*
- * Read digital section size and check that it also fits inside
- * the image.
- */
- ds_size = *(u16 *)(buf + hdr_size);
- if (ds_size >= image_size)
- return -EINVAL;
-
- if (!sw->safe_mode) {
- u16 device_id;
+ ret = tb_nvm_validate(sw->nvm);
+ if (ret)
+ return ret;
- /*
- * Make sure the device ID in the image matches the one
- * we read from the switch config space.
- */
- device_id = *(u16 *)(buf + hdr_size + NVM_DEVID);
- if (device_id != sw->config.device_id)
- return -EINVAL;
-
- if (sw->generation < 3) {
- /* Write CSS headers first */
- ret = dma_port_flash_write(sw->dma_port,
- DMA_PORT_CSS_ADDRESS, buf + NVM_CSS,
- DMA_PORT_CSS_MAX_SIZE);
- if (ret)
- return ret;
- }
+ ret = tb_nvm_write_headers(sw->nvm);
+ if (ret)
+ return ret;
- /* Skip headers in the image */
- buf += hdr_size;
- image_size -= hdr_size;
- }
+ buf = sw->nvm->buf_data_start;
+ image_size = sw->nvm->buf_data_size;
if (tb_switch_is_usb4(sw))
ret = usb4_switch_nvm_write(sw, 0, buf, image_size);
else
ret = dma_port_flash_write(sw->dma_port, 0, buf, image_size);
- if (!ret)
- sw->nvm->flushed = true;
- return ret;
+ if (ret)
+ return ret;
+
+ sw->nvm->flushed = true;
+ return 0;
}
static int nvm_authenticate_host_dma_port(struct tb_switch *sw)
@@ -300,14 +258,6 @@ static inline bool nvm_upgradeable(struct tb_switch *sw)
return nvm_readable(sw);
}
-static inline int nvm_read(struct tb_switch *sw, unsigned int address,
- void *buf, size_t size)
-{
- if (tb_switch_is_usb4(sw))
- return usb4_switch_nvm_read(sw, address, buf, size);
- return dma_port_flash_read(sw->dma_port, address, buf, size);
-}
-
static int nvm_authenticate(struct tb_switch *sw, bool auth_only)
{
int ret;
@@ -335,8 +285,26 @@ static int nvm_authenticate(struct tb_switch *sw, bool auth_only)
return ret;
}
-static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val,
- size_t bytes)
+/**
+ * tb_switch_nvm_read() - Read router NVM
+ * @sw: Router whose NVM to read
+ * @address: Start address on the NVM
+ * @buf: Buffer where the read data is copied
+ * @size: Size of the buffer in bytes
+ *
+ * Reads from router NVM and returns the requested data in @buf. Locking
+ * is up to the caller. Returns %0 in success and negative errno in case
+ * of failure.
+ */
+int tb_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf,
+ size_t size)
+{
+ if (tb_switch_is_usb4(sw))
+ return usb4_switch_nvm_read(sw, address, buf, size);
+ return dma_port_flash_read(sw->dma_port, address, buf, size);
+}
+
+static int nvm_read(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct tb_nvm *nvm = priv;
struct tb_switch *sw = tb_to_switch(nvm->dev);
@@ -349,7 +317,7 @@ static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val,
goto out;
}
- ret = nvm_read(sw, offset, val, bytes);
+ ret = tb_switch_nvm_read(sw, offset, val, bytes);
mutex_unlock(&sw->tb->lock);
out:
@@ -359,8 +327,7 @@ out:
return ret;
}
-static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
- size_t bytes)
+static int nvm_write(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct tb_nvm *nvm = priv;
struct tb_switch *sw = tb_to_switch(nvm->dev);
@@ -384,28 +351,20 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
static int tb_switch_nvm_add(struct tb_switch *sw)
{
struct tb_nvm *nvm;
- u32 val;
int ret;
if (!nvm_readable(sw))
return 0;
- /*
- * The NVM format of non-Intel hardware is not known so
- * currently restrict NVM upgrade for Intel hardware. We may
- * relax this in the future when we learn other NVM formats.
- */
- if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL &&
- sw->config.vendor_id != 0x8087) {
- dev_info(&sw->dev,
- "NVM format of vendor %#x is not known, disabling NVM upgrade\n",
- sw->config.vendor_id);
- return 0;
+ nvm = tb_nvm_alloc(&sw->dev);
+ if (IS_ERR(nvm)) {
+ ret = PTR_ERR(nvm) == -EOPNOTSUPP ? 0 : PTR_ERR(nvm);
+ goto err_nvm;
}
- nvm = tb_nvm_alloc(&sw->dev);
- if (IS_ERR(nvm))
- return PTR_ERR(nvm);
+ ret = tb_nvm_read_version(nvm);
+ if (ret)
+ goto err_nvm;
/*
* If the switch is in safe-mode the only accessible portion of
@@ -413,31 +372,13 @@ static int tb_switch_nvm_add(struct tb_switch *sw)
* write new functional NVM.
*/
if (!sw->safe_mode) {
- u32 nvm_size, hdr_size;
-
- ret = nvm_read(sw, NVM_FLASH_SIZE, &val, sizeof(val));
- if (ret)
- goto err_nvm;
-
- hdr_size = sw->generation < 3 ? SZ_8K : SZ_16K;
- nvm_size = (SZ_1M << (val & 7)) / 8;
- nvm_size = (nvm_size - hdr_size) / 2;
-
- ret = nvm_read(sw, NVM_VERSION, &val, sizeof(val));
- if (ret)
- goto err_nvm;
-
- nvm->major = val >> 16;
- nvm->minor = val >> 8;
-
- ret = tb_nvm_add_active(nvm, nvm_size, tb_switch_nvm_read);
+ ret = tb_nvm_add_active(nvm, nvm_read);
if (ret)
goto err_nvm;
}
if (!sw->no_nvm_upgrade) {
- ret = tb_nvm_add_non_active(nvm, NVM_MAX_SIZE,
- tb_switch_nvm_write);
+ ret = tb_nvm_add_non_active(nvm, nvm_write);
if (ret)
goto err_nvm;
}
@@ -446,7 +387,11 @@ static int tb_switch_nvm_add(struct tb_switch *sw)
return 0;
err_nvm:
- tb_nvm_free(nvm);
+ tb_sw_dbg(sw, "NVM upgrade disabled\n");
+ sw->no_nvm_upgrade = true;
+ if (!IS_ERR(nvm))
+ tb_nvm_free(nvm);
+
return ret;
}
@@ -1229,6 +1174,135 @@ int tb_port_update_credits(struct tb_port *port)
return tb_port_do_update_credits(port->dual_link_port);
}
+static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
+{
+ u32 phy;
+ int ret;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (secondary)
+ phy |= LANE_ADP_CS_1_PMS;
+ else
+ phy &= ~LANE_ADP_CS_1_PMS;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_pm_secondary_enable(struct tb_port *port)
+{
+ return __tb_port_pm_secondary_set(port, true);
+}
+
+static int tb_port_pm_secondary_disable(struct tb_port *port)
+{
+ return __tb_port_pm_secondary_set(port, false);
+}
+
+/* Called for USB4 or Titan Ridge routers only */
+static bool tb_port_clx_supported(struct tb_port *port, unsigned int clx_mask)
+{
+ u32 val, mask = 0;
+ bool ret;
+
+ /* Don't enable CLx in case of two single-lane links */
+ if (!port->bonded && port->dual_link_port)
+ return false;
+
+ /* Don't enable CLx in case of inter-domain link */
+ if (port->xdomain)
+ return false;
+
+ if (tb_switch_is_usb4(port->sw)) {
+ if (!usb4_port_clx_supported(port))
+ return false;
+ } else if (!tb_lc_is_clx_supported(port)) {
+ return false;
+ }
+
+ if (clx_mask & TB_CL1) {
+ /* CL0s and CL1 are enabled and supported together */
+ mask |= LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
+ }
+ if (clx_mask & TB_CL2)
+ mask |= LANE_ADP_CS_0_CL2_SUPPORT;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_0, 1);
+ if (ret)
+ return false;
+
+ return !!(val & mask);
+}
+
+static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable)
+{
+ u32 phy, mask;
+ int ret;
+
+ /* CL0s and CL1 are enabled and supported together */
+ if (clx == TB_CL1)
+ mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+ else
+ /* For now we support only CL0s and CL1. Not CL2 */
+ return -EOPNOTSUPP;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (enable)
+ phy |= mask;
+ else
+ phy &= ~mask;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx)
+{
+ return __tb_port_clx_set(port, clx, false);
+}
+
+static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx)
+{
+ return __tb_port_clx_set(port, clx, true);
+}
+
+/**
+ * tb_port_is_clx_enabled() - Is given CL state enabled
+ * @port: USB4 port to check
+ * @clx_mask: Mask of CL states to check
+ *
+ * Returns true if any of the given CL states is enabled for @port.
+ */
+bool tb_port_is_clx_enabled(struct tb_port *port, unsigned int clx_mask)
+{
+ u32 val, mask = 0;
+ int ret;
+
+ if (!tb_port_clx_supported(port, clx_mask))
+ return false;
+
+ if (clx_mask & TB_CL1)
+ mask |= LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+ if (clx_mask & TB_CL2)
+ mask |= LANE_ADP_CS_1_CL2_ENABLE;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return false;
+
+ return !!(val & mask);
+}
+
static int tb_port_start_lane_initialization(struct tb_port *port)
{
int ret;
@@ -1620,7 +1694,7 @@ static ssize_t authorized_show(struct device *dev,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%u\n", sw->authorized);
+ return sysfs_emit(buf, "%u\n", sw->authorized);
}
static int disapprove_switch(struct device *dev, void *not_used)
@@ -1730,7 +1804,7 @@ static ssize_t boot_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%u\n", sw->boot);
+ return sysfs_emit(buf, "%u\n", sw->boot);
}
static DEVICE_ATTR_RO(boot);
@@ -1739,7 +1813,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%#x\n", sw->device);
+ return sysfs_emit(buf, "%#x\n", sw->device);
}
static DEVICE_ATTR_RO(device);
@@ -1748,7 +1822,7 @@ device_name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%s\n", sw->device_name ? sw->device_name : "");
+ return sysfs_emit(buf, "%s\n", sw->device_name ?: "");
}
static DEVICE_ATTR_RO(device_name);
@@ -1757,7 +1831,7 @@ generation_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%u\n", sw->generation);
+ return sysfs_emit(buf, "%u\n", sw->generation);
}
static DEVICE_ATTR_RO(generation);
@@ -1771,9 +1845,9 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr,
return restart_syscall();
if (sw->key)
- ret = sprintf(buf, "%*phN\n", TB_SWITCH_KEY_SIZE, sw->key);
+ ret = sysfs_emit(buf, "%*phN\n", TB_SWITCH_KEY_SIZE, sw->key);
else
- ret = sprintf(buf, "\n");
+ ret = sysfs_emit(buf, "\n");
mutex_unlock(&sw->tb->lock);
return ret;
@@ -1818,7 +1892,7 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%u.0 Gb/s\n", sw->link_speed);
+ return sysfs_emit(buf, "%u.0 Gb/s\n", sw->link_speed);
}
/*
@@ -1833,7 +1907,7 @@ static ssize_t lanes_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%u\n", sw->link_width);
+ return sysfs_emit(buf, "%u\n", sw->link_width);
}
/*
@@ -1850,7 +1924,7 @@ static ssize_t nvm_authenticate_show(struct device *dev,
u32 status;
nvm_get_auth_status(sw, &status);
- return sprintf(buf, "%#x\n", status);
+ return sysfs_emit(buf, "%#x\n", status);
}
static ssize_t nvm_authenticate_sysfs(struct device *dev, const char *buf,
@@ -1866,6 +1940,11 @@ static ssize_t nvm_authenticate_sysfs(struct device *dev, const char *buf,
goto exit_rpm;
}
+ if (sw->no_nvm_upgrade) {
+ ret = -EOPNOTSUPP;
+ goto exit_unlock;
+ }
+
/* If NVMem devices are not yet added */
if (!sw->nvm) {
ret = -EAGAIN;
@@ -1954,7 +2033,7 @@ static ssize_t nvm_version_show(struct device *dev,
else if (!sw->nvm)
ret = -EAGAIN;
else
- ret = sprintf(buf, "%x.%x\n", sw->nvm->major, sw->nvm->minor);
+ ret = sysfs_emit(buf, "%x.%x\n", sw->nvm->major, sw->nvm->minor);
mutex_unlock(&sw->tb->lock);
@@ -1967,7 +2046,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%#x\n", sw->vendor);
+ return sysfs_emit(buf, "%#x\n", sw->vendor);
}
static DEVICE_ATTR_RO(vendor);
@@ -1976,7 +2055,7 @@ vendor_name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%s\n", sw->vendor_name ? sw->vendor_name : "");
+ return sysfs_emit(buf, "%s\n", sw->vendor_name ?: "");
}
static DEVICE_ATTR_RO(vendor_name);
@@ -1985,7 +2064,7 @@ static ssize_t unique_id_show(struct device *dev, struct device_attribute *attr,
{
struct tb_switch *sw = tb_to_switch(dev);
- return sprintf(buf, "%pUb\n", sw->uuid);
+ return sysfs_emit(buf, "%pUb\n", sw->uuid);
}
static DEVICE_ATTR_RO(unique_id);
@@ -2822,6 +2901,26 @@ static void tb_switch_credits_init(struct tb_switch *sw)
tb_sw_info(sw, "failed to determine preferred buffer allocation, using defaults\n");
}
+static int tb_switch_port_hotplug_enable(struct tb_switch *sw)
+{
+ struct tb_port *port;
+
+ if (tb_switch_is_icm(sw))
+ return 0;
+
+ tb_switch_for_each_port(sw, port) {
+ int res;
+
+ if (!port->cap_usb4)
+ continue;
+
+ res = usb4_port_hotplug_enable(port);
+ if (res)
+ return res;
+ }
+ return 0;
+}
+
/**
* tb_switch_add() - Add a switch to the domain
* @sw: Switch to add
@@ -2891,6 +2990,10 @@ int tb_switch_add(struct tb_switch *sw)
return ret;
}
+ ret = tb_switch_port_hotplug_enable(sw);
+ if (ret)
+ return ret;
+
ret = device_add(&sw->dev);
if (ret) {
dev_err(&sw->dev, "failed to add device: %d\n", ret);
@@ -3362,35 +3465,6 @@ struct tb_port *tb_switch_find_port(struct tb_switch *sw,
return NULL;
}
-static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
-{
- u32 phy;
- int ret;
-
- ret = tb_port_read(port, &phy, TB_CFG_PORT,
- port->cap_phy + LANE_ADP_CS_1, 1);
- if (ret)
- return ret;
-
- if (secondary)
- phy |= LANE_ADP_CS_1_PMS;
- else
- phy &= ~LANE_ADP_CS_1_PMS;
-
- return tb_port_write(port, &phy, TB_CFG_PORT,
- port->cap_phy + LANE_ADP_CS_1, 1);
-}
-
-static int tb_port_pm_secondary_enable(struct tb_port *port)
-{
- return __tb_port_pm_secondary_set(port, true);
-}
-
-static int tb_port_pm_secondary_disable(struct tb_port *port)
-{
- return __tb_port_pm_secondary_set(port, false);
-}
-
static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
{
struct tb_switch *parent = tb_switch_parent(sw);
@@ -3409,83 +3483,6 @@ static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
return tb_port_pm_secondary_disable(down);
}
-/* Called for USB4 or Titan Ridge routers only */
-static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
-{
- u32 mask, val;
- bool ret;
-
- /* Don't enable CLx in case of two single-lane links */
- if (!port->bonded && port->dual_link_port)
- return false;
-
- /* Don't enable CLx in case of inter-domain link */
- if (port->xdomain)
- return false;
-
- if (tb_switch_is_usb4(port->sw)) {
- if (!usb4_port_clx_supported(port))
- return false;
- } else if (!tb_lc_is_clx_supported(port)) {
- return false;
- }
-
- switch (clx) {
- case TB_CL1:
- /* CL0s and CL1 are enabled and supported together */
- mask = LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
- break;
-
- /* For now we support only CL0s and CL1. Not CL2 */
- case TB_CL2:
- default:
- return false;
- }
-
- ret = tb_port_read(port, &val, TB_CFG_PORT,
- port->cap_phy + LANE_ADP_CS_0, 1);
- if (ret)
- return false;
-
- return !!(val & mask);
-}
-
-static int __tb_port_clx_set(struct tb_port *port, enum tb_clx clx, bool enable)
-{
- u32 phy, mask;
- int ret;
-
- /* CL0s and CL1 are enabled and supported together */
- if (clx == TB_CL1)
- mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
- else
- /* For now we support only CL0s and CL1. Not CL2 */
- return -EOPNOTSUPP;
-
- ret = tb_port_read(port, &phy, TB_CFG_PORT,
- port->cap_phy + LANE_ADP_CS_1, 1);
- if (ret)
- return ret;
-
- if (enable)
- phy |= mask;
- else
- phy &= ~mask;
-
- return tb_port_write(port, &phy, TB_CFG_PORT,
- port->cap_phy + LANE_ADP_CS_1, 1);
-}
-
-static int tb_port_clx_disable(struct tb_port *port, enum tb_clx clx)
-{
- return __tb_port_clx_set(port, clx, false);
-}
-
-static int tb_port_clx_enable(struct tb_port *port, enum tb_clx clx)
-{
- return __tb_port_clx_set(port, clx, true);
-}
-
static int __tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
{
struct tb_switch *parent = tb_switch_parent(sw);
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 9a277078338c..462845804427 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -105,6 +105,32 @@ static void tb_remove_dp_resources(struct tb_switch *sw)
}
}
+static void tb_discover_dp_resource(struct tb *tb, struct tb_port *port)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+ struct tb_port *p;
+
+ list_for_each_entry(p, &tcm->dp_resources, list) {
+ if (p == port)
+ return;
+ }
+
+ tb_port_dbg(port, "DP %s resource available discovered\n",
+ tb_port_is_dpin(port) ? "IN" : "OUT");
+ list_add_tail(&port->list, &tcm->dp_resources);
+}
+
+static void tb_discover_dp_resources(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+ struct tb_tunnel *tunnel;
+
+ list_for_each_entry(tunnel, &tcm->tunnel_list, list) {
+ if (tb_tunnel_is_dp(tunnel))
+ tb_discover_dp_resource(tb, tunnel->dst_port);
+ }
+}
+
static void tb_switch_discover_tunnels(struct tb_switch *sw,
struct list_head *list,
bool alloc_hopids)
@@ -1416,8 +1442,11 @@ static int tb_start(struct tb *tb)
* ICM firmware upgrade needs running firmware and in native
* mode that is not available so disable firmware upgrade of the
* root switch.
+ *
+ * However, USB4 routers support NVM firmware upgrade if they
+ * implement the necessary router operations.
*/
- tb->root_switch->no_nvm_upgrade = true;
+ tb->root_switch->no_nvm_upgrade = !tb_switch_is_usb4(tb->root_switch);
/* All USB4 routers support runtime PM */
tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch);
@@ -1446,6 +1475,8 @@ static int tb_start(struct tb *tb)
tb_scan_switch(tb->root_switch);
/* Find out tunnels created by the boot firmware */
tb_discover_tunnels(tb);
+ /* Add DP resources from the DP tunnels created by the boot firmware */
+ tb_discover_dp_resources(tb);
/*
* If the boot firmware did not create USB 3.x tunnels create them
* now for the whole topology.
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 0f067c06cba6..f9786976f5ec 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -23,11 +23,6 @@
#define NVM_MAX_SIZE SZ_512K
#define NVM_DATA_DWORDS 16
-/* Intel specific NVM offsets */
-#define NVM_DEVID 0x05
-#define NVM_VERSION 0x08
-#define NVM_FLASH_SIZE 0x45
-
/**
* struct tb_nvm - Structure holding NVM information
* @dev: Owner of the NVM
@@ -35,28 +30,35 @@
* @minor: Minor version number of the active NVM portion
* @id: Identifier used with both NVM portions
* @active: Active portion NVMem device
+ * @active_size: Size in bytes of the active NVM
* @non_active: Non-active portion NVMem device
* @buf: Buffer where the NVM image is stored before it is written to
* the actual NVM flash device
+ * @buf_data_start: Where the actual image starts after skipping
+ * possible headers
* @buf_data_size: Number of bytes actually consumed by the new NVM
* image
* @authenticating: The device is authenticating the new NVM
* @flushed: The image has been flushed to the storage area
+ * @vops: Router vendor specific NVM operations (optional)
*
* The user of this structure needs to handle serialization of possible
* concurrent access.
*/
struct tb_nvm {
struct device *dev;
- u8 major;
- u8 minor;
+ u32 major;
+ u32 minor;
int id;
struct nvmem_device *active;
+ size_t active_size;
struct nvmem_device *non_active;
void *buf;
+ void *buf_data_start;
size_t buf_data_size;
bool authenticating;
bool flushed;
+ const struct tb_nvm_vendor_ops *vops;
};
enum tb_nvm_write_ops {
@@ -113,8 +115,8 @@ struct tb_switch_tmu {
enum tb_clx {
TB_CLX_DISABLE,
/* CL0s and CL1 are enabled and supported together */
- TB_CL1,
- TB_CL2,
+ TB_CL1 = BIT(0),
+ TB_CL2 = BIT(1),
};
/**
@@ -279,12 +281,16 @@ struct tb_port {
* @can_offline: Does the port have necessary platform support to moved
* it into offline mode and back
* @offline: The port is currently in offline mode
+ * @margining: Pointer to margining structure if enabled
*/
struct usb4_port {
struct device dev;
struct tb_port *port;
bool can_offline;
bool offline;
+#ifdef CONFIG_USB4_DEBUGFS_MARGINING
+ struct tb_margining *margining;
+#endif
};
/**
@@ -296,6 +302,7 @@ struct usb4_port {
* @device: Device ID of the retimer
* @port: Pointer to the lane 0 adapter
* @nvm: Pointer to the NVM if the retimer has one (%NULL otherwise)
+ * @no_nvm_upgrade: Prevent NVM upgrade of this retimer
* @auth_status: Status of last NVM authentication
*/
struct tb_retimer {
@@ -306,6 +313,7 @@ struct tb_retimer {
u32 device;
struct tb_port *port;
struct tb_nvm *nvm;
+ bool no_nvm_upgrade;
u32 auth_status;
};
@@ -737,11 +745,13 @@ static inline void tb_domain_put(struct tb *tb)
}
struct tb_nvm *tb_nvm_alloc(struct device *dev);
-int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read);
+int tb_nvm_read_version(struct tb_nvm *nvm);
+int tb_nvm_validate(struct tb_nvm *nvm);
+int tb_nvm_write_headers(struct tb_nvm *nvm);
+int tb_nvm_add_active(struct tb_nvm *nvm, nvmem_reg_read_t reg_read);
int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val,
size_t bytes);
-int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size,
- nvmem_reg_write_t reg_write);
+int tb_nvm_add_non_active(struct tb_nvm *nvm, nvmem_reg_write_t reg_write);
void tb_nvm_free(struct tb_nvm *nvm);
void tb_nvm_exit(void);
@@ -755,6 +765,8 @@ int tb_nvm_write_data(unsigned int address, const void *buf, size_t size,
unsigned int retries, write_block_fn write_next_block,
void *write_block_data);
+int tb_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf,
+ size_t size);
struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent,
u64 route);
struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb,
@@ -1035,6 +1047,7 @@ void tb_port_lane_bonding_disable(struct tb_port *port);
int tb_port_wait_for_link_width(struct tb_port *port, int width,
int timeout_msec);
int tb_port_update_credits(struct tb_port *port);
+bool tb_port_is_clx_enabled(struct tb_port *port, enum tb_clx clx);
int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec);
int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap);
@@ -1132,6 +1145,13 @@ void tb_xdomain_remove(struct tb_xdomain *xd);
struct tb_xdomain *tb_xdomain_find_by_link_depth(struct tb *tb, u8 link,
u8 depth);
+static inline struct tb_switch *tb_xdomain_parent(struct tb_xdomain *xd)
+{
+ return tb_to_switch(xd->dev.parent);
+}
+
+int tb_retimer_nvm_read(struct tb_retimer *rt, unsigned int address, void *buf,
+ size_t size);
int tb_retimer_scan(struct tb_port *port, bool add);
void tb_retimer_remove_all(struct tb_port *port);
@@ -1174,6 +1194,7 @@ int usb4_switch_add_ports(struct tb_switch *sw);
void usb4_switch_remove_ports(struct tb_switch *sw);
int usb4_port_unlock(struct tb_port *port);
+int usb4_port_hotplug_enable(struct tb_port *port);
int usb4_port_configure(struct tb_port *port);
void usb4_port_unconfigure(struct tb_port *port);
int usb4_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd);
@@ -1182,6 +1203,13 @@ int usb4_port_router_offline(struct tb_port *port);
int usb4_port_router_online(struct tb_port *port);
int usb4_port_enumerate_retimers(struct tb_port *port);
bool usb4_port_clx_supported(struct tb_port *port);
+int usb4_port_margining_caps(struct tb_port *port, u32 *caps);
+int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes,
+ unsigned int ber_level, bool timing, bool right_high,
+ u32 *results);
+int usb4_port_sw_margin(struct tb_port *port, unsigned int lanes, bool timing,
+ bool right_high, u32 counter);
+int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors);
int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index);
int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
@@ -1264,6 +1292,8 @@ void tb_debugfs_init(void);
void tb_debugfs_exit(void);
void tb_switch_debugfs_init(struct tb_switch *sw);
void tb_switch_debugfs_remove(struct tb_switch *sw);
+void tb_xdomain_debugfs_init(struct tb_xdomain *xd);
+void tb_xdomain_debugfs_remove(struct tb_xdomain *xd);
void tb_service_debugfs_init(struct tb_service *svc);
void tb_service_debugfs_remove(struct tb_service *svc);
#else
@@ -1271,6 +1301,8 @@ static inline void tb_debugfs_init(void) { }
static inline void tb_debugfs_exit(void) { }
static inline void tb_switch_debugfs_init(struct tb_switch *sw) { }
static inline void tb_switch_debugfs_remove(struct tb_switch *sw) { }
+static inline void tb_xdomain_debugfs_init(struct tb_xdomain *xd) { }
+static inline void tb_xdomain_debugfs_remove(struct tb_xdomain *xd) { }
static inline void tb_service_debugfs_init(struct tb_service *svc) { }
static inline void tb_service_debugfs_remove(struct tb_service *svc) { }
#endif
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index 166054110388..86319dca0f8c 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -308,6 +308,7 @@ struct tb_regs_port_header {
#define ADP_CS_5 0x05
#define ADP_CS_5_LCA_MASK GENMASK(28, 22)
#define ADP_CS_5_LCA_SHIFT 22
+#define ADP_CS_5_DHP BIT(31)
/* TMU adapter registers */
#define TMU_ADP_CS_3 0x03
@@ -324,6 +325,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_0_SUPPORTED_WIDTH_DUAL 0x2
#define LANE_ADP_CS_0_CL0S_SUPPORT BIT(26)
#define LANE_ADP_CS_0_CL1_SUPPORT BIT(27)
+#define LANE_ADP_CS_0_CL2_SUPPORT BIT(28)
#define LANE_ADP_CS_1 0x01
#define LANE_ADP_CS_1_TARGET_SPEED_MASK GENMASK(3, 0)
#define LANE_ADP_CS_1_TARGET_SPEED_GEN3 0xc
@@ -333,6 +335,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3
#define LANE_ADP_CS_1_CL0S_ENABLE BIT(10)
#define LANE_ADP_CS_1_CL1_ENABLE BIT(11)
+#define LANE_ADP_CS_1_CL2_ENABLE BIT(12)
#define LANE_ADP_CS_1_LD BIT(14)
#define LANE_ADP_CS_1_LB BIT(15)
#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16)
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index a386228a44ee..f986854aa207 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1046,6 +1046,26 @@ int usb4_port_unlock(struct tb_port *port)
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
}
+/**
+ * usb4_port_hotplug_enable() - Enables hotplug for a port
+ * @port: USB4 port to operate on
+ *
+ * Enables hot plug events on a given port. This is only intended
+ * to be used on lane, DP-IN, and DP-OUT adapters.
+ */
+int usb4_port_hotplug_enable(struct tb_port *port)
+{
+ int ret;
+ u32 val;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+ if (ret)
+ return ret;
+
+ val &= ~ADP_CS_5_DHP;
+ return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+}
+
static int usb4_port_set_configured(struct tb_port *port, bool configured)
{
int ret;
@@ -1386,6 +1406,126 @@ bool usb4_port_clx_supported(struct tb_port *port)
return !!(val & PORT_CS_18_CPS);
}
+/**
+ * usb4_port_margining_caps() - Read USB4 port marginig capabilities
+ * @port: USB4 port
+ * @caps: Array with at least two elements to hold the results
+ *
+ * Reads the USB4 port lane margining capabilities into @caps.
+ */
+int usb4_port_margining_caps(struct tb_port *port, u32 *caps)
+{
+ int ret;
+
+ ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_OPCODE_READ_LANE_MARGINING_CAP, 500);
+ if (ret)
+ return ret;
+
+ return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_DATA, caps, sizeof(*caps) * 2);
+}
+
+/**
+ * usb4_port_hw_margin() - Run hardware lane margining on port
+ * @port: USB4 port
+ * @lanes: Which lanes to run (must match the port capabilities). Can be
+ * %0, %1 or %7.
+ * @ber_level: BER level contour value
+ * @timing: Perform timing margining instead of voltage
+ * @right_high: Use Right/high margin instead of left/low
+ * @results: Array with at least two elements to hold the results
+ *
+ * Runs hardware lane margining on USB4 port and returns the result in
+ * @results.
+ */
+int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes,
+ unsigned int ber_level, bool timing, bool right_high,
+ u32 *results)
+{
+ u32 val;
+ int ret;
+
+ val = lanes;
+ if (timing)
+ val |= USB4_MARGIN_HW_TIME;
+ if (right_high)
+ val |= USB4_MARGIN_HW_RH;
+ if (ber_level)
+ val |= (ber_level << USB4_MARGIN_HW_BER_SHIFT) &
+ USB4_MARGIN_HW_BER_MASK;
+
+ ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_METADATA, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_OPCODE_RUN_HW_LANE_MARGINING, 2500);
+ if (ret)
+ return ret;
+
+ return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_DATA, results, sizeof(*results) * 2);
+}
+
+/**
+ * usb4_port_sw_margin() - Run software lane margining on port
+ * @port: USB4 port
+ * @lanes: Which lanes to run (must match the port capabilities). Can be
+ * %0, %1 or %7.
+ * @timing: Perform timing margining instead of voltage
+ * @right_high: Use Right/high margin instead of left/low
+ * @counter: What to do with the error counter
+ *
+ * Runs software lane margining on USB4 port. Read back the error
+ * counters by calling usb4_port_sw_margin_errors(). Returns %0 in
+ * success and negative errno otherwise.
+ */
+int usb4_port_sw_margin(struct tb_port *port, unsigned int lanes, bool timing,
+ bool right_high, u32 counter)
+{
+ u32 val;
+ int ret;
+
+ val = lanes;
+ if (timing)
+ val |= USB4_MARGIN_SW_TIME;
+ if (right_high)
+ val |= USB4_MARGIN_SW_RH;
+ val |= (counter << USB4_MARGIN_SW_COUNTER_SHIFT) &
+ USB4_MARGIN_SW_COUNTER_MASK;
+
+ ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_METADATA, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ return usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_OPCODE_RUN_SW_LANE_MARGINING, 2500);
+}
+
+/**
+ * usb4_port_sw_margin_errors() - Read the software margining error counters
+ * @port: USB4 port
+ * @errors: Error metadata is copied here.
+ *
+ * This reads back the software margining error counters from the port.
+ * Returns %0 in success and negative errno otherwise.
+ */
+int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors)
+{
+ int ret;
+
+ ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_OPCODE_READ_SW_MARGIN_ERR, 150);
+ if (ret)
+ return ret;
+
+ return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0,
+ USB4_SB_METADATA, errors, sizeof(*errors));
+}
+
static inline int usb4_port_retimer_op(struct tb_port *port, u8 index,
enum usb4_sb_opcode opcode,
int timeout_msec)
diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c
index c31c0d94d8b3..bbb248a2686f 100644
--- a/drivers/thunderbolt/xdomain.c
+++ b/drivers/thunderbolt/xdomain.c
@@ -877,7 +877,7 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr,
* It should be null terminated but anything else is pretty much
* allowed.
*/
- return sprintf(buf, "%*pE\n", (int)strlen(svc->key), svc->key);
+ return sysfs_emit(buf, "%*pE\n", (int)strlen(svc->key), svc->key);
}
static DEVICE_ATTR_RO(key);
@@ -903,7 +903,7 @@ static ssize_t prtcid_show(struct device *dev, struct device_attribute *attr,
{
struct tb_service *svc = container_of(dev, struct tb_service, dev);
- return sprintf(buf, "%u\n", svc->prtcid);
+ return sysfs_emit(buf, "%u\n", svc->prtcid);
}
static DEVICE_ATTR_RO(prtcid);
@@ -912,7 +912,7 @@ static ssize_t prtcvers_show(struct device *dev, struct device_attribute *attr,
{
struct tb_service *svc = container_of(dev, struct tb_service, dev);
- return sprintf(buf, "%u\n", svc->prtcvers);
+ return sysfs_emit(buf, "%u\n", svc->prtcvers);
}
static DEVICE_ATTR_RO(prtcvers);
@@ -921,7 +921,7 @@ static ssize_t prtcrevs_show(struct device *dev, struct device_attribute *attr,
{
struct tb_service *svc = container_of(dev, struct tb_service, dev);
- return sprintf(buf, "%u\n", svc->prtcrevs);
+ return sysfs_emit(buf, "%u\n", svc->prtcrevs);
}
static DEVICE_ATTR_RO(prtcrevs);
@@ -930,7 +930,7 @@ static ssize_t prtcstns_show(struct device *dev, struct device_attribute *attr,
{
struct tb_service *svc = container_of(dev, struct tb_service, dev);
- return sprintf(buf, "0x%08x\n", svc->prtcstns);
+ return sysfs_emit(buf, "0x%08x\n", svc->prtcstns);
}
static DEVICE_ATTR_RO(prtcstns);
@@ -1131,11 +1131,6 @@ static int populate_properties(struct tb_xdomain *xd,
return 0;
}
-static inline struct tb_switch *tb_xdomain_parent(struct tb_xdomain *xd)
-{
- return tb_to_switch(xd->dev.parent);
-}
-
static int tb_xdomain_update_link_attributes(struct tb_xdomain *xd)
{
bool change = false;
@@ -1440,6 +1435,8 @@ static int tb_xdomain_get_properties(struct tb_xdomain *xd)
if (xd->vendor_name && xd->device_name)
dev_info(&xd->dev, "%s %s\n", xd->vendor_name,
xd->device_name);
+
+ tb_xdomain_debugfs_init(xd);
} else {
kobject_uevent(&xd->dev.kobj, KOBJ_CHANGE);
}
@@ -1664,7 +1661,7 @@ static ssize_t device_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%#x\n", xd->device);
+ return sysfs_emit(buf, "%#x\n", xd->device);
}
static DEVICE_ATTR_RO(device);
@@ -1676,7 +1673,7 @@ device_name_show(struct device *dev, struct device_attribute *attr, char *buf)
if (mutex_lock_interruptible(&xd->lock))
return -ERESTARTSYS;
- ret = sprintf(buf, "%s\n", xd->device_name ? xd->device_name : "");
+ ret = sysfs_emit(buf, "%s\n", xd->device_name ?: "");
mutex_unlock(&xd->lock);
return ret;
@@ -1688,7 +1685,7 @@ static ssize_t maxhopid_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%d\n", xd->remote_max_hopid);
+ return sysfs_emit(buf, "%d\n", xd->remote_max_hopid);
}
static DEVICE_ATTR_RO(maxhopid);
@@ -1697,7 +1694,7 @@ static ssize_t vendor_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%#x\n", xd->vendor);
+ return sysfs_emit(buf, "%#x\n", xd->vendor);
}
static DEVICE_ATTR_RO(vendor);
@@ -1709,7 +1706,7 @@ vendor_name_show(struct device *dev, struct device_attribute *attr, char *buf)
if (mutex_lock_interruptible(&xd->lock))
return -ERESTARTSYS;
- ret = sprintf(buf, "%s\n", xd->vendor_name ? xd->vendor_name : "");
+ ret = sysfs_emit(buf, "%s\n", xd->vendor_name ?: "");
mutex_unlock(&xd->lock);
return ret;
@@ -1721,7 +1718,7 @@ static ssize_t unique_id_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%pUb\n", xd->remote_uuid);
+ return sysfs_emit(buf, "%pUb\n", xd->remote_uuid);
}
static DEVICE_ATTR_RO(unique_id);
@@ -1730,7 +1727,7 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%u.0 Gb/s\n", xd->link_speed);
+ return sysfs_emit(buf, "%u.0 Gb/s\n", xd->link_speed);
}
static DEVICE_ATTR(rx_speed, 0444, speed_show, NULL);
@@ -1741,7 +1738,7 @@ static ssize_t lanes_show(struct device *dev, struct device_attribute *attr,
{
struct tb_xdomain *xd = container_of(dev, struct tb_xdomain, dev);
- return sprintf(buf, "%u\n", xd->link_width);
+ return sysfs_emit(buf, "%u\n", xd->link_width);
}
static DEVICE_ATTR(rx_lanes, 0444, lanes_show, NULL);
@@ -1940,6 +1937,8 @@ static int unregister_service(struct device *dev, void *data)
*/
void tb_xdomain_remove(struct tb_xdomain *xd)
{
+ tb_xdomain_debugfs_remove(xd);
+
stop_handshake(xd);
device_for_each_child_reverse(&xd->dev, xd, unregister_service);
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 362217189ef3..1cdb8758ae01 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -1026,7 +1026,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
/* public fields */
instance->driver = driver;
- strlcpy(instance->driver_name, driver->driver_name,
+ strscpy(instance->driver_name, driver->driver_name,
sizeof(instance->driver_name));
instance->usb_dev = usb_dev;
diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
index dc068e940ed5..2bc5d094548b 100644
--- a/drivers/usb/cdns3/cdns3-plat.c
+++ b/drivers/usb/cdns3/cdns3-plat.c
@@ -110,8 +110,6 @@ static int cdns3_plat_probe(struct platform_device *pdev)
cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
if (cdns->wakeup_irq == -EPROBE_DEFER)
return cdns->wakeup_irq;
- else if (cdns->wakeup_irq == 0)
- return -EINVAL;
if (cdns->wakeup_irq < 0) {
dev_dbg(dev, "couldn't get wakeup irq\n");
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 661818e8fed6..c815824a0b2d 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -34,26 +34,26 @@ config USB_CHIPIDEA_HOST
ChipIdea driver.
config USB_CHIPIDEA_PCI
- tristate "Enable PCI glue driver" if EMBEDDED
+ tristate "Enable PCI glue driver" if EXPERT
depends on USB_PCI
depends on NOP_USB_XCEIV
default USB_CHIPIDEA
config USB_CHIPIDEA_MSM
- tristate "Enable MSM hsusb glue driver" if EMBEDDED
+ tristate "Enable MSM hsusb glue driver" if EXPERT
default USB_CHIPIDEA
config USB_CHIPIDEA_IMX
- tristate "Enable i.MX USB glue driver" if EMBEDDED
+ tristate "Enable i.MX USB glue driver" if EXPERT
depends on OF
default USB_CHIPIDEA
config USB_CHIPIDEA_GENERIC
- tristate "Enable generic USB2 glue driver" if EMBEDDED
+ tristate "Enable generic USB2 glue driver" if EXPERT
default USB_CHIPIDEA
config USB_CHIPIDEA_TEGRA
- tristate "Enable Tegra USB glue driver" if EMBEDDED
+ tristate "Enable Tegra USB glue driver" if EXPERT
depends on OF
default USB_CHIPIDEA
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 89e1d82d739b..dc86b12060b5 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -30,6 +30,7 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
static const struct ci_hdrc_platform_data ci_zynq_pdata = {
.capoffset = DEF_CAPOFFSET,
+ .flags = CI_HDRC_PHY_VBUS_CONTROL,
};
static const struct ci_hdrc_platform_data ci_zevio_pdata = {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index bdc3885c0d49..bc3634a54c6b 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -63,6 +63,13 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
priv->enabled = enable;
}
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) {
+ if (enable)
+ usb_phy_vbus_on(ci->usb_phy);
+ else
+ usb_phy_vbus_off(ci->usb_phy);
+ }
+
if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
/*
* Marvell 28nm HSIC PHY requires forcing the port to HS mode.
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 61b157b9c662..ada78daba6df 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -471,6 +471,10 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
return;
}
}
+
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+ usb_phy_vbus_on(ci->usb_phy);
+
/* Disable data pulse irq */
hw_write_otgsc(ci, OTGSC_DPIE, 0);
@@ -480,6 +484,9 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
if (ci->platdata->reg_vbus)
regulator_disable(ci->platdata->reg_vbus);
+ if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL)
+ usb_phy_vbus_off(ci->usb_phy);
+
fsm->a_bus_drop = 1;
fsm->a_bus_req = 0;
}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index eebe782380fb..1f0951be15ab 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -958,7 +958,7 @@ static void wdm_wwan_rx(struct wdm_device *desc, int length)
if (!skb)
return;
- memcpy(skb_put(skb, length), desc->inbuf, length);
+ skb_put_data(skb, desc->inbuf, length);
wwan_port_rx(port, skb);
/* inbuf has been copied, it is safe to check for outstanding data */
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
index 075f6b1b2a1a..f204cec8d380 100644
--- a/drivers/usb/common/debug.c
+++ b/drivers/usb/common/debug.c
@@ -208,30 +208,28 @@ static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size)
snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
}
-/**
- * usb_decode_ctrl - Returns human readable representation of control request.
- * @str: buffer to return a human-readable representation of control request.
- * This buffer should have about 200 bytes.
- * @size: size of str buffer.
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (CPU byte order)
- * @wIndex: matches the USB wIndex field (CPU byte order)
- * @wLength: matches the USB wLength field (CPU byte order)
- *
- * Function returns decoded, formatted and human-readable description of
- * control request packet.
- *
- * The usage scenario for this is for tracepoints, so function as a return
- * use the same value as in parameters. This approach allows to use this
- * function in TP_printk
- *
- * Important: wValue, wIndex, wLength parameters before invoking this function
- * should be processed by le16_to_cpu macro.
- */
-const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
- __u8 bRequest, __u16 wValue, __u16 wIndex,
- __u16 wLength)
+static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ u8 recip = bRequestType & USB_RECIP_MASK;
+ u8 type = bRequestType & USB_TYPE_MASK;
+
+ snprintf(str, size,
+ "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u",
+ (type == USB_TYPE_STANDARD) ? "Standard" :
+ (type == USB_TYPE_VENDOR) ? "Vendor" :
+ (type == USB_TYPE_CLASS) ? "Class" : "Unknown",
+ (recip == USB_RECIP_DEVICE) ? "Device" :
+ (recip == USB_RECIP_INTERFACE) ? "Interface" :
+ (recip == USB_RECIP_ENDPOINT) ? "Endpoint" : "Unknown",
+ (bRequestType & USB_DIR_IN) ? "IN" : "OUT",
+ bRequest, wValue, wIndex, wLength);
+}
+
+static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
{
switch (bRequest) {
case USB_REQ_GET_STATUS:
@@ -272,14 +270,48 @@ const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
usb_decode_set_isoch_delay(wValue, str, size);
break;
default:
- snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
- bRequestType, bRequest,
- (u8)(cpu_to_le16(wValue) & 0xff),
- (u8)(cpu_to_le16(wValue) >> 8),
- (u8)(cpu_to_le16(wIndex) & 0xff),
- (u8)(cpu_to_le16(wIndex) >> 8),
- (u8)(cpu_to_le16(wLength) & 0xff),
- (u8)(cpu_to_le16(wLength) >> 8));
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+}
+
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ * This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ switch (bRequestType & USB_TYPE_MASK) {
+ case USB_TYPE_STANDARD:
+ usb_decode_ctrl_standard(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ case USB_TYPE_VENDOR:
+ case USB_TYPE_CLASS:
+ default:
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
}
return str;
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 0a4f441aff8f..d7c8461976ce 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -233,7 +233,7 @@ err:
return 0;
}
-static int ulpi_regs_read(struct seq_file *seq, void *data)
+static int ulpi_regs_show(struct seq_file *seq, void *data)
{
struct ulpi *ulpi = seq->private;
@@ -269,21 +269,7 @@ static int ulpi_regs_read(struct seq_file *seq, void *data)
return 0;
}
-
-static int ulpi_regs_open(struct inode *inode, struct file *f)
-{
- struct ulpi *ulpi = inode->i_private;
-
- return single_open(f, ulpi_regs_read, ulpi);
-}
-
-static const struct file_operations ulpi_regs_ops = {
- .owner = THIS_MODULE,
- .open = ulpi_regs_open,
- .release = single_release,
- .read = seq_read,
- .llseek = seq_lseek
-};
+DEFINE_SHOW_ATTRIBUTE(ulpi_regs);
#define ULPI_ROOT debugfs_lookup(KBUILD_MODNAME, NULL)
@@ -316,7 +302,7 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
}
root = debugfs_create_dir(dev_name(dev), ULPI_ROOT);
- debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_ops);
+ debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops);
dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
ulpi->id.vendor, ulpi->id.product);
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index b39c9f1c375d..e20874caba36 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -208,10 +208,8 @@ static int usb_conn_probe(struct platform_device *pdev)
if (PTR_ERR(info->vbus) == -ENODEV)
info->vbus = NULL;
- if (IS_ERR(info->vbus)) {
- ret = PTR_ERR(info->vbus);
- return dev_err_probe(dev, ret, "failed to get vbus :%d\n", ret);
- }
+ if (IS_ERR(info->vbus))
+ return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n");
info->role_sw = usb_role_switch_get(dev);
if (IS_ERR(info->role_sw))
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index b5b85bf80329..837f3e57f580 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1434,7 +1434,7 @@ static int proc_getdriver(struct usb_dev_state *ps, void __user *arg)
if (!intf || !intf->dev.driver)
ret = -ENODATA;
else {
- strlcpy(gd.driver, intf->dev.driver->name,
+ strscpy(gd.driver, intf->dev.driver->name,
sizeof(gd.driver));
ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0);
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 482dae72ef1c..9b77f49b3560 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -157,7 +157,6 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
/**
* usb_hcd_pci_probe - initialize PCI-based HCDs
* @dev: USB Host Controller being probed
- * @id: pci hotplug id connecting controller to HCD framework
* @driver: USB HC driver handle
*
* Context: task context, might sleep
@@ -170,8 +169,7 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
*
* Return: 0 if successful.
*/
-int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
- const struct hc_driver *driver)
+int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
{
struct usb_hcd *hcd;
int retval;
@@ -180,9 +178,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
if (usb_disabled())
return -ENODEV;
- if (!id)
- return -EINVAL;
-
if (!driver)
return -EINVAL;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 94b305bbd621..faeaace0d197 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1474,7 +1474,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
urb->sg,
urb->num_sgs,
dir);
- if (n <= 0)
+ if (!n)
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SG;
@@ -2158,21 +2158,14 @@ static struct urb *request_single_step_set_feature_urb(
{
struct urb *urb;
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- struct usb_host_endpoint *ep;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return NULL;
urb->pipe = usb_rcvctrlpipe(udev, 0);
- ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (!ep) {
- usb_free_urb(urb);
- return NULL;
- }
- urb->ep = ep;
+ urb->ep = &udev->ep0;
urb->dev = udev;
urb->setup_packet = (void *)dr;
urb->transfer_buffer = buf;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f99a65a64588..0722d2131305 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -388,6 +388,15 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Kingston DataTraveler 3.0 */
{ USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM },
+ /* NVIDIA Jetson devices in Force Recovery mode */
+ { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
@@ -437,6 +446,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */
+ { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
{ USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index dc4fc72ab1b6..5635e4d7ec88 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -3,36 +3,6 @@
* core.c - DesignWare HS OTG Controller common routines
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 0683852e47e4..40cf2880d7e5 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -3,36 +3,6 @@
* core.h - DesignWare HS OTG Controller common declarations
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __DWC2_CORE_H__
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index a5c52b237e72..158ede753854 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -3,36 +3,6 @@
* core_intr.c - DesignWare HS OTG Controller common interrupt handling
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index aaf7b9fc4d34..657f1f659ffa 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3,36 +3,6 @@
* hcd.c - DesignWare HS OTG Controller host-mode routines
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index ea02ee63ac6d..b7254d94fdc3 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -3,37 +3,8 @@
* hcd.h - DesignWare HS OTG Controller host-mode declarations
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
#ifndef __DWC2_HCD_H__
#define __DWC2_HCD_H__
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index a858b5f9c1d6..6b4d825e97a2 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -3,36 +3,6 @@
* hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index d5f4ec1b73b1..c9740caa5974 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -3,36 +3,6 @@
* hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 24beff610cf2..0a1145592fc7 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -3,36 +3,6 @@
* hcd_queue.c - DesignWare HS OTG Controller host queuing routines
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 6b16fbf98bc6..13abdd5f6752 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -3,36 +3,6 @@
* hw.h - DesignWare HS OTG Controller hardware definitions
*
* Copyright 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __DWC2_HW_H__
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index fdb8a42fff86..8eab5f38b110 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -1,36 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) 2004-2016 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index a93559b4ecdb..b7306ed8be4c 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -3,36 +3,6 @@
* pci.c - DesignWare HS OTG Controller PCI driver
*
* Copyright (C) 2004-2013 Synopsys, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index fd0ccf6f3ec5..ec4ace0107f5 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -3,36 +3,6 @@
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index d0237b30c9be..ea51624461b5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,7 +23,6 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
-#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
#include <linux/reset.h>
@@ -86,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
* mode. If the controller supports DRD but the dr_mode is not
* specified or set to OTG, then set the mode to peripheral.
*/
- if (mode == USB_DR_MODE_OTG && !dwc->edev &&
+ if (mode == USB_DR_MODE_OTG &&
(!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
!device_property_read_bool(dwc->dev, "usb-role-switch")) &&
!DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -408,6 +407,10 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc)
reg |= FIELD_PREP(DWC3_GFLADJ_REFCLK_FLADJ_MASK, fladj)
| FIELD_PREP(DWC3_GFLADJ_240MHZDECR, decr >> 1)
| FIELD_PREP(DWC3_GFLADJ_240MHZDECR_PLS1, decr & 1);
+
+ if (dwc->gfladj_refclk_lpm_sel)
+ reg |= DWC3_GFLADJ_REFCLK_LPM_SEL;
+
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
}
@@ -789,7 +792,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
else
reg |= DWC3_GUSB2PHYCFG_ENBLSLPM;
- if (dwc->dis_u2_freeclk_exists_quirk)
+ if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel)
reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
@@ -1180,6 +1183,21 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
}
+ /*
+ * When configured in HOST mode, after issuing U3/L2 exit controller
+ * fails to send proper CRC checksum in CRC5 feild. Because of this
+ * behaviour Transaction Error is generated, resulting in reset and
+ * re-enumeration of usb device attached. All the termsel, xcvrsel,
+ * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1
+ * will correct this problem. This option is to support certain
+ * legacy ULPI PHYs.
+ */
+ if (dwc->resume_hs_terminations) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
+ reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST;
+ dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
+ }
+
if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
@@ -1523,8 +1541,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
"snps,dis-del-phy-power-chg-quirk");
dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
"snps,dis-tx-ipgap-linecheck-quirk");
+ dwc->resume_hs_terminations = device_property_read_bool(dev,
+ "snps,resume-hs-terminations");
dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
"snps,parkmode-disable-ss-quirk");
+ dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev,
+ "snps,gfladj-refclk-lpm-sel-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
@@ -1668,46 +1690,6 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
}
-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
- struct device *dev = dwc->dev;
- struct device_node *np_phy;
- struct extcon_dev *edev = NULL;
- const char *name;
-
- if (device_property_read_bool(dev, "extcon"))
- return extcon_get_edev_by_phandle(dev, 0);
-
- /*
- * Device tree platforms should get extcon via phandle.
- * On ACPI platforms, we get the name from a device property.
- * This device property is for kernel internal use only and
- * is expected to be set by the glue code.
- */
- if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
- return extcon_get_extcon_dev(name);
-
- /*
- * Try to get an extcon device from the USB PHY controller's "port"
- * node. Check if it has the "port" node first, to avoid printing the
- * error message from underlying code, as it's a valid case: extcon
- * device (and "port" node) may be missing in case of "usb-role-switch"
- * or OTG mode.
- */
- np_phy = of_parse_phandle(dev->of_node, "phys", 0);
- if (of_graph_is_present(np_phy)) {
- struct device_node *np_conn;
-
- np_conn = of_graph_get_remote_node(np_phy, -1, -1);
- if (np_conn)
- edev = extcon_find_edev_by_node(np_conn);
- of_node_put(np_conn);
- }
- of_node_put(np_phy);
-
- return edev;
-}
-
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1753,8 +1735,10 @@ static int dwc3_probe(struct platform_device *pdev)
dwc3_get_properties(dwc);
dwc->reset = devm_reset_control_array_get_optional_shared(dev);
- if (IS_ERR(dwc->reset))
- return PTR_ERR(dwc->reset);
+ if (IS_ERR(dwc->reset)) {
+ ret = PTR_ERR(dwc->reset);
+ goto put_usb_psy;
+ }
if (dev->of_node) {
/*
@@ -1764,45 +1748,57 @@ static int dwc3_probe(struct platform_device *pdev)
* check for them to retain backwards compatibility.
*/
dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
- if (IS_ERR(dwc->bus_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
- "could not get bus clock\n");
+ if (IS_ERR(dwc->bus_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+ "could not get bus clock\n");
+ goto put_usb_psy;
+ }
if (dwc->bus_clk == NULL) {
dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
- if (IS_ERR(dwc->bus_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
- "could not get bus clock\n");
+ if (IS_ERR(dwc->bus_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+ "could not get bus clock\n");
+ goto put_usb_psy;
+ }
}
dwc->ref_clk = devm_clk_get_optional(dev, "ref");
- if (IS_ERR(dwc->ref_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
- "could not get ref clock\n");
+ if (IS_ERR(dwc->ref_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+ "could not get ref clock\n");
+ goto put_usb_psy;
+ }
if (dwc->ref_clk == NULL) {
dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
- if (IS_ERR(dwc->ref_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
- "could not get ref clock\n");
+ if (IS_ERR(dwc->ref_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+ "could not get ref clock\n");
+ goto put_usb_psy;
+ }
}
dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
- if (IS_ERR(dwc->susp_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
- "could not get suspend clock\n");
+ if (IS_ERR(dwc->susp_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+ "could not get suspend clock\n");
+ goto put_usb_psy;
+ }
if (dwc->susp_clk == NULL) {
dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
- if (IS_ERR(dwc->susp_clk))
- return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
- "could not get suspend clock\n");
+ if (IS_ERR(dwc->susp_clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+ "could not get suspend clock\n");
+ goto put_usb_psy;
+ }
}
}
ret = reset_control_deassert(dwc->reset);
if (ret)
- return ret;
+ goto put_usb_psy;
ret = dwc3_clk_enable(dwc);
if (ret)
@@ -1844,13 +1840,6 @@ static int dwc3_probe(struct platform_device *pdev)
goto err2;
}
- dwc->edev = dwc3_get_extcon(dwc);
- if (IS_ERR(dwc->edev)) {
- ret = PTR_ERR(dwc->edev);
- dev_err_probe(dwc->dev, ret, "failed to get extcon\n");
- goto err3;
- }
-
ret = dwc3_get_dr_mode(dwc);
if (ret)
goto err3;
@@ -1909,7 +1898,7 @@ disable_clks:
dwc3_clk_disable(dwc);
assert_reset:
reset_control_assert(dwc->reset);
-
+put_usb_psy:
if (dwc->usb_psy)
power_supply_put(dwc->usb_psy);
@@ -1977,9 +1966,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
case DWC3_GCTL_PRTCAP_DEVICE:
if (pm_runtime_suspended(dwc->dev))
break;
- spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_suspend(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
synchronize_irq(dwc->irq_gadget);
dwc3_core_exit(dwc);
break;
@@ -2040,9 +2027,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
return ret;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
- spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_resume(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
break;
case DWC3_GCTL_PRTCAP_HOST:
if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4fe4287dc934..8f9959ba9fd4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -263,6 +263,7 @@
#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26)
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
+#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10)
/* Global Status Register */
#define DWC3_GSTS_OTG_IP BIT(10)
@@ -391,6 +392,7 @@
#define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f
#define DWC3_GFLADJ_REFCLK_FLADJ_MASK GENMASK(21, 8)
+#define DWC3_GFLADJ_REFCLK_LPM_SEL BIT(23)
#define DWC3_GFLADJ_240MHZDECR GENMASK(30, 24)
#define DWC3_GFLADJ_240MHZDECR_PLS1 BIT(31)
@@ -1096,6 +1098,8 @@ struct dwc3_scratchpad_array {
* change quirk.
* @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
* check during HS transmit.
+ * @resume-hs-terminations: Set if we enable quirk for fixing improper crc
+ * generation after resume from suspend.
* @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
* instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
@@ -1311,7 +1315,9 @@ struct dwc3 {
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
unsigned dis_tx_ipgap_linecheck_quirk:1;
+ unsigned resume_hs_terminations:1;
unsigned parkmode_disable_ss_quirk:1;
+ unsigned gfladj_refclk_lpm_sel:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
@@ -1560,6 +1566,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
u32 param);
void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc);
+void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
{ return 0; }
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index d223c54115f4..48b44b88dc25 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -278,7 +278,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size,
break;
case DWC3_DEPEVT_XFERINPROGRESS:
scnprintf(str + len, size - len,
- "Transfer In Progress [%d] (%c%c%c)",
+ "Transfer In Progress [%08x] (%c%c%c)",
event->parameters,
status & DEPEVT_STATUS_SHORT ? 'S' : 's',
status & DEPEVT_STATUS_IOC ? 'I' : 'i',
@@ -286,7 +286,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size,
break;
case DWC3_DEPEVT_XFERNOTREADY:
len += scnprintf(str + len, size - len,
- "Transfer Not Ready [%d]%s",
+ "Transfer Not Ready [%08x]%s",
event->parameters,
status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
" (Active)" : " (Not Active)");
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 039bf241769a..8cad9e7d3368 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,6 +8,7 @@
*/
#include <linux/extcon.h>
+#include <linux/of_graph.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/property.h>
@@ -438,6 +439,51 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
}
+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+ struct device *dev = dwc->dev;
+ struct device_node *np_phy;
+ struct extcon_dev *edev = NULL;
+ const char *name;
+
+ if (device_property_read_bool(dev, "extcon"))
+ return extcon_get_edev_by_phandle(dev, 0);
+
+ /*
+ * Device tree platforms should get extcon via phandle.
+ * On ACPI platforms, we get the name from a device property.
+ * This device property is for kernel internal use only and
+ * is expected to be set by the glue code.
+ */
+ if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
+ edev = extcon_get_extcon_dev(name);
+ if (!edev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return edev;
+ }
+
+ /*
+ * Try to get an extcon device from the USB PHY controller's "port"
+ * node. Check if it has the "port" node first, to avoid printing the
+ * error message from underlying code, as it's a valid case: extcon
+ * device (and "port" node) may be missing in case of "usb-role-switch"
+ * or OTG mode.
+ */
+ np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+ if (of_graph_is_present(np_phy)) {
+ struct device_node *np_conn;
+
+ np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+ if (np_conn)
+ edev = extcon_find_edev_by_node(np_conn);
+ of_node_put(np_conn);
+ }
+ of_node_put(np_phy);
+
+ return edev;
+}
+
#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
#define ROLE_SWITCH 1
static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -542,6 +588,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
device_property_read_bool(dwc->dev, "usb-role-switch"))
return dwc3_setup_role_switch(dwc);
+ dwc->edev = dwc3_get_extcon(dwc);
+ if (IS_ERR(dwc->edev))
+ return PTR_ERR(dwc->edev);
+
if (dwc->edev) {
dwc->edev_nb.notifier_call = dwc3_drd_notifier;
ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 4ee4ca09873a..fb14511b1e10 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -40,9 +40,10 @@
#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee
#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee
#define PCI_DEVICE_ID_INTEL_JSP 0x4dee
-#define PCI_DEVICE_ID_INTEL_ADL 0x465e
-#define PCI_DEVICE_ID_INTEL_ADLP 0x51ee
-#define PCI_DEVICE_ID_INTEL_ADLM 0x54ee
+#define PCI_DEVICE_ID_INTEL_ADL 0x460e
+#define PCI_DEVICE_ID_INTEL_ADL_PCH 0x51ee
+#define PCI_DEVICE_ID_INTEL_ADLN 0x465e
+#define PCI_DEVICE_ID_INTEL_ADLN_PCH 0x54ee
#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1
#define PCI_DEVICE_ID_INTEL_RPL 0x460e
#define PCI_DEVICE_ID_INTEL_RPLS 0x7a61
@@ -448,10 +449,13 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL),
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLP),
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_PCH),
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLM),
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN),
+ (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN_PCH),
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS),
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index d3f3937d7005..7c40f3ffc054 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -243,6 +243,7 @@ static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
*/
static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
{
+ enum usb_device_speed max_speed;
struct device *dev = qcom->dev;
int ret;
@@ -252,7 +253,7 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
if (IS_ERR(qcom->icc_path_ddr)) {
dev_err(dev, "failed to get usb-ddr path: %ld\n",
- PTR_ERR(qcom->icc_path_ddr));
+ PTR_ERR(qcom->icc_path_ddr));
return PTR_ERR(qcom->icc_path_ddr);
}
@@ -263,21 +264,20 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
return PTR_ERR(qcom->icc_path_apps);
}
- if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
- usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
+ max_speed = usb_get_maximum_speed(&qcom->dwc3->dev);
+ if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) {
ret = icc_set_bw(qcom->icc_path_ddr,
- USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
- else
+ USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+ } else {
ret = icc_set_bw(qcom->icc_path_ddr,
- USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
-
+ USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+ }
if (ret) {
dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
return ret;
}
- ret = icc_set_bw(qcom->icc_path_apps,
- APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+ ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
if (ret) {
dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
return ret;
@@ -1007,10 +1007,6 @@ static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
static const struct of_device_id dwc3_qcom_of_match[] = {
{ .compatible = "qcom,dwc3" },
- { .compatible = "qcom,msm8996-dwc3" },
- { .compatible = "qcom,msm8998-dwc3" },
- { .compatible = "qcom,sdm660-dwc3" },
- { .compatible = "qcom,sdm845-dwc3" },
{ }
};
MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 67b237c7a76a..8607d4c23283 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -47,6 +47,7 @@ struct dwc3_xlnx {
struct device *dev;
void __iomem *regs;
int (*pltfm_init)(struct dwc3_xlnx *data);
+ struct phy *usb3_phy;
};
static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask)
@@ -100,13 +101,12 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
struct device *dev = priv_data->dev;
struct reset_control *crst, *hibrst, *apbrst;
struct gpio_desc *reset_gpio;
- struct phy *usb3_phy;
int ret = 0;
u32 reg;
- usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
- if (IS_ERR(usb3_phy)) {
- ret = PTR_ERR(usb3_phy);
+ priv_data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
+ if (IS_ERR(priv_data->usb3_phy)) {
+ ret = PTR_ERR(priv_data->usb3_phy);
dev_err_probe(dev, ret,
"failed to get USB3 PHY\n");
goto err;
@@ -121,7 +121,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
* in use but the usb3-phy entry is missing from the device tree.
* Therefore, skip these operations in this case.
*/
- if (!usb3_phy)
+ if (!priv_data->usb3_phy)
goto skip_usb3_phy;
crst = devm_reset_control_get_exclusive(dev, "usb_crst");
@@ -166,9 +166,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
goto err;
}
- ret = phy_init(usb3_phy);
+ ret = phy_init(priv_data->usb3_phy);
if (ret < 0) {
- phy_exit(usb3_phy);
+ phy_exit(priv_data->usb3_phy);
goto err;
}
@@ -196,9 +196,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
goto err;
}
- ret = phy_power_on(usb3_phy);
+ ret = phy_power_on(priv_data->usb3_phy);
if (ret < 0) {
- phy_exit(usb3_phy);
+ phy_exit(priv_data->usb3_phy);
goto err;
}
@@ -322,7 +322,7 @@ static int dwc3_xlnx_remove(struct platform_device *pdev)
return 0;
}
-static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev)
+static int __maybe_unused dwc3_xlnx_runtime_suspend(struct device *dev)
{
struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
@@ -331,7 +331,7 @@ static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev)
return 0;
}
-static int __maybe_unused dwc3_xlnx_resume_common(struct device *dev)
+static int __maybe_unused dwc3_xlnx_runtime_resume(struct device *dev)
{
struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
@@ -346,8 +346,45 @@ static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev)
return 0;
}
-static UNIVERSAL_DEV_PM_OPS(dwc3_xlnx_dev_pm_ops, dwc3_xlnx_suspend_common,
- dwc3_xlnx_resume_common, dwc3_xlnx_runtime_idle);
+static int __maybe_unused dwc3_xlnx_suspend(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+ phy_exit(priv_data->usb3_phy);
+
+ /* Disable the clocks */
+ clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
+
+ return 0;
+}
+
+static int __maybe_unused dwc3_xlnx_resume(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
+ if (ret)
+ return ret;
+
+ ret = phy_init(priv_data->usb3_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_power_on(priv_data->usb3_phy);
+ if (ret < 0) {
+ phy_exit(priv_data->usb3_phy);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dwc3_xlnx_suspend, dwc3_xlnx_resume)
+ SET_RUNTIME_PM_OPS(dwc3_xlnx_runtime_suspend,
+ dwc3_xlnx_runtime_resume, dwc3_xlnx_runtime_idle)
+};
static struct platform_driver dwc3_xlnx_driver = {
.probe = dwc3_xlnx_probe,
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 197af63f8d05..61de693461da 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
spin_lock_irqsave(&dwc->lock, flags);
- if (!dep->endpoint.desc || !dwc->pullups_connected) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
ret = -ESHUTDOWN;
@@ -293,7 +293,10 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
continue;
dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
- dwc3_stop_active_transfer(dwc3_ep, true, true);
+ if (dwc->connected)
+ dwc3_stop_active_transfer(dwc3_ep, true, true);
+ else
+ dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN);
}
}
@@ -815,7 +818,7 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
int ret = -EINVAL;
u32 len;
- if (!dwc->gadget_driver || !dwc->connected)
+ if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected)
goto out;
trace_dwc3_ctrl_req(ctrl);
@@ -1118,6 +1121,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
{
switch (event->status) {
case DEPEVT_STATUS_CONTROL_DATA:
+ if (!dwc->softconnect || !dwc->connected)
+ return;
/*
* We already have a DATA transfer in the controller's cache,
* if we receive a XferNotReady(DATA) we will ignore it, unless
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index eca945feeec3..079cd333632e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -366,7 +366,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
dwc3_writel(dep->regs, DWC3_DEPCMD, cmd);
- if (!(cmd & DWC3_DEPCMD_CMDACT)) {
+ if (!(cmd & DWC3_DEPCMD_CMDACT) ||
+ (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER &&
+ !(cmd & DWC3_DEPCMD_CMDIOC))) {
ret = 0;
goto skip_status;
}
@@ -965,29 +967,33 @@ out:
return 0;
}
-static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
+void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status)
{
struct dwc3_request *req;
dwc3_stop_active_transfer(dep, true, false);
+ /* If endxfer is delayed, avoid unmapping requests */
+ if (dep->flags & DWC3_EP_DELAY_STOP)
+ return;
+
/* - giveback all requests to gadget driver */
while (!list_empty(&dep->started_list)) {
req = next_request(&dep->started_list);
- dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ dwc3_gadget_giveback(dep, req, status);
}
while (!list_empty(&dep->pending_list)) {
req = next_request(&dep->pending_list);
- dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ dwc3_gadget_giveback(dep, req, status);
}
while (!list_empty(&dep->cancelled_list)) {
req = next_request(&dep->cancelled_list);
- dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ dwc3_gadget_giveback(dep, req, status);
}
}
@@ -1005,6 +1011,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
u32 reg;
+ u32 mask;
trace_dwc3_gadget_ep_disable(dep);
@@ -1022,11 +1029,19 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
dep->endpoint.desc = NULL;
}
- dwc3_remove_requests(dwc, dep);
+ dwc3_remove_requests(dwc, dep, -ECONNRESET);
dep->stream_capable = false;
dep->type = 0;
- dep->flags &= DWC3_EP_TXFIFO_RESIZED;
+ mask = DWC3_EP_TXFIFO_RESIZED;
+ /*
+ * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is
+ * set. Do not clear DEP flags, so that the end transfer command will
+ * be reattempted during the next SETUP stage.
+ */
+ if (dep->flags & DWC3_EP_DELAY_STOP)
+ mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED);
+ dep->flags &= mask;
return 0;
}
@@ -2340,7 +2355,7 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc)
if (!dep)
continue;
- dwc3_remove_requests(dwc, dep);
+ dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
}
}
@@ -2440,7 +2455,7 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc)
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
{
u32 reg;
- u32 timeout = 500;
+ u32 timeout = 2000;
if (pm_runtime_suspended(dwc->dev))
return 0;
@@ -2473,6 +2488,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
dwc3_gadget_dctl_write_safe(dwc, reg);
do {
+ usleep_range(1000, 2000);
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
reg &= DWC3_DSTS_DEVCTRLHLT;
} while (--timeout && !(!is_on ^ !reg));
@@ -2501,6 +2517,9 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
if (dwc->ep0state != EP0_SETUP_PHASE) {
int ret;
+ if (dwc->delayed_status)
+ dwc3_ep0_send_delayed_status(dwc);
+
reinit_completion(&dwc->ep0_in_setup);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -2568,6 +2587,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
return 0;
}
+ synchronize_irq(dwc->irq_gadget);
+
if (!is_on) {
ret = dwc3_gadget_soft_disconnect(dwc);
} else {
@@ -2718,6 +2739,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dep = dwc->eps[0];
+ dep->flags = 0;
ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
@@ -2725,6 +2747,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
}
dep = dwc->eps[1];
+ dep->flags = 0;
ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
@@ -3568,7 +3591,7 @@ static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep,
* streams are updated, and the device controller will not be
* triggered to generate ERDY to move the next stream data. To
* workaround this and maintain compatibility with various
- * hosts, force to reinitate the stream until the host is ready
+ * hosts, force to reinitiate the stream until the host is ready
* instead of waiting for the host to prime the endpoint.
*/
if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) {
@@ -3596,11 +3619,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dep = dwc->eps[epnum];
if (!(dep->flags & DWC3_EP_ENABLED)) {
- if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
+ if ((epnum > 1) && !(dep->flags & DWC3_EP_TRANSFER_STARTED))
return;
/* Handle only EPCMDCMPLT when EP disabled */
- if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
+ if ((event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) &&
+ !(epnum <= 1 && event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE))
return;
}
@@ -3695,7 +3719,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
* timeout. Delay issuing the End Transfer command until the Setup TRB is
* prepared.
*/
- if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) {
+ if (dwc->ep0state != EP0_SETUP_PHASE) {
dep->flags |= DWC3_EP_DELAY_STOP;
return;
}
@@ -3763,13 +3787,24 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
reg &= ~DWC3_DCTL_INITU2ENA;
dwc3_gadget_dctl_write_safe(dwc, reg);
+ dwc->connected = false;
+
dwc3_disconnect_gadget(dwc);
dwc->gadget->speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
- dwc->connected = false;
+ if (dwc->ep0state != EP0_SETUP_PHASE) {
+ unsigned int dir;
+
+ dir = !!dwc->ep0_expect_in;
+ if (dwc->ep0state == EP0_DATA_PHASE)
+ dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
+ else
+ dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
+ dwc3_ep0_stall_and_restart(dwc);
+ }
}
static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
@@ -3867,6 +3902,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
u8 lanes = 1;
u8 speed;
+ if (!dwc->softconnect)
+ return;
+
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
@@ -4129,7 +4167,7 @@ static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
unsigned int is_ss = evtinfo & BIT(4);
/*
- * WORKAROUND: DWC3 revison 2.20a with hibernation support
+ * WORKAROUND: DWC3 revision 2.20a with hibernation support
* have a known issue which can cause USB CV TD.9.23 to fail
* randomly.
*
@@ -4507,12 +4545,17 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
+ unsigned long flags;
+
if (!dwc->gadget_driver)
return 0;
dwc3_gadget_run_stop(dwc, false, false);
+
+ spin_lock_irqsave(&dwc->lock, flags);
dwc3_disconnect_gadget(dwc);
__dwc3_gadget_stop(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
}
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index cb998ba50fea..1975aec8d36d 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -241,7 +241,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
__entry->enqueue = dep->trb_enqueue;
__entry->dequeue = dep->trb_dequeue;
),
- TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)",
+ TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x sofn %08x (%c%c%c%c:%c%c:%s)",
__get_str(name), __entry->trb, __entry->enqueue,
__entry->dequeue, __entry->bph, __entry->bpl,
({char *s;
@@ -267,6 +267,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
s = "";
} s; }),
DWC3_TRB_SIZE_LENGTH(__entry->size), __entry->ctrl,
+ DWC3_TRB_CTRL_GET_SID_SOFN(__entry->ctrl),
__entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h',
__entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l',
__entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c',
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index e0fa4b186ec6..73dc10a77cde 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2645,10 +2645,10 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
unsigned i = 0;
vla_group(d);
vla_item(d, struct usb_gadget_strings *, stringtabs,
- lang_count + 1);
+ size_add(lang_count, 1));
vla_item(d, struct usb_gadget_strings, stringtab, lang_count);
vla_item(d, struct usb_string, strings,
- lang_count*(needed_count+1));
+ size_mul(lang_count, (needed_count + 1)));
char *vlabuf = kmalloc(vla_group_size(d), GFP_KERNEL);
@@ -3700,7 +3700,7 @@ int ffs_name_dev(struct ffs_dev *dev, const char *name)
existing = _ffs_do_find_dev(name);
if (!existing)
- strlcpy(dev->name, name, ARRAY_SIZE(dev->name));
+ strscpy(dev->name, name, ARRAY_SIZE(dev->name));
else if (existing != dev)
ret = -EBUSY;
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 925e99f9775c..3abf7f586e2a 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -2662,11 +2662,16 @@ static ssize_t forced_eject_store(struct device *dev,
}
static DEVICE_ATTR_RW(nofua);
-/* mode wil be set in fsg_lun_attr_is_visible() */
-static DEVICE_ATTR(ro, 0, ro_show, ro_store);
-static DEVICE_ATTR(file, 0, file_show, file_store);
static DEVICE_ATTR_WO(forced_eject);
+/*
+ * Mode of the ro and file attribute files will be overridden in
+ * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a
+ * removable device.
+ */
+static DEVICE_ATTR_RW(ro);
+static DEVICE_ATTR_RW(file);
+
/****************************** FSG COMMON ******************************/
static void fsg_lun_release(struct device *dev)
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index dc8f078f918c..c36bcfa0e9b4 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -450,39 +450,35 @@ struct ndp_parser_opts {
unsigned next_ndp_index;
};
-#define INIT_NDP16_OPTS { \
- .nth_sign = USB_CDC_NCM_NTH16_SIGN, \
- .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, \
- .nth_size = sizeof(struct usb_cdc_ncm_nth16), \
- .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \
- .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), \
- .ndplen_align = 4, \
- .dgram_item_len = 1, \
- .block_length = 1, \
- .ndp_index = 1, \
- .reserved1 = 0, \
- .reserved2 = 0, \
- .next_ndp_index = 1, \
- }
-
-
-#define INIT_NDP32_OPTS { \
- .nth_sign = USB_CDC_NCM_NTH32_SIGN, \
- .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, \
- .nth_size = sizeof(struct usb_cdc_ncm_nth32), \
- .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \
- .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), \
- .ndplen_align = 8, \
- .dgram_item_len = 2, \
- .block_length = 2, \
- .ndp_index = 2, \
- .reserved1 = 1, \
- .reserved2 = 2, \
- .next_ndp_index = 2, \
- }
+static const struct ndp_parser_opts ndp16_opts = {
+ .nth_sign = USB_CDC_NCM_NTH16_SIGN,
+ .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN,
+ .nth_size = sizeof(struct usb_cdc_ncm_nth16),
+ .ndp_size = sizeof(struct usb_cdc_ncm_ndp16),
+ .dpe_size = sizeof(struct usb_cdc_ncm_dpe16),
+ .ndplen_align = 4,
+ .dgram_item_len = 1,
+ .block_length = 1,
+ .ndp_index = 1,
+ .reserved1 = 0,
+ .reserved2 = 0,
+ .next_ndp_index = 1,
+};
-static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS;
-static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS;
+static const struct ndp_parser_opts ndp32_opts = {
+ .nth_sign = USB_CDC_NCM_NTH32_SIGN,
+ .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN,
+ .nth_size = sizeof(struct usb_cdc_ncm_nth32),
+ .ndp_size = sizeof(struct usb_cdc_ncm_ndp32),
+ .dpe_size = sizeof(struct usb_cdc_ncm_dpe32),
+ .ndplen_align = 8,
+ .dgram_item_len = 2,
+ .block_length = 2,
+ .ndp_index = 2,
+ .reserved1 = 1,
+ .reserved2 = 2,
+ .next_ndp_index = 2,
+};
static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
{
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index abec5c58f525..a881c69b1f2b 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -89,7 +89,7 @@ struct printer_dev {
u8 printer_cdev_open;
wait_queue_head_t wait;
unsigned q_len;
- char *pnp_string; /* We don't own memory! */
+ char **pnp_string; /* We don't own memory! */
struct usb_function function;
};
@@ -1000,16 +1000,16 @@ static int printer_func_setup(struct usb_function *f,
if ((wIndex>>8) != dev->interface)
break;
- if (!dev->pnp_string) {
+ if (!*dev->pnp_string) {
value = 0;
break;
}
- value = strlen(dev->pnp_string);
+ value = strlen(*dev->pnp_string);
buf[0] = (value >> 8) & 0xFF;
buf[1] = value & 0xFF;
- memcpy(buf + 2, dev->pnp_string, value);
+ memcpy(buf + 2, *dev->pnp_string, value);
DBG(dev, "1284 PNP String: %x %s\n", value,
- dev->pnp_string);
+ *dev->pnp_string);
break;
case GET_PORT_STATUS: /* Get Port Status */
@@ -1475,7 +1475,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
kref_init(&dev->kref);
++opts->refcnt;
dev->minor = opts->minor;
- dev->pnp_string = opts->pnp_string;
+ dev->pnp_string = &opts->pnp_string;
dev->q_len = opts->q_len;
mutex_unlock(&opts->lock);
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index 8e17ac831be0..658e2e21fdd0 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2306,7 +2306,7 @@ static struct usb_function *tcm_alloc(struct usb_function_instance *fi)
DECLARE_USB_FUNCTION(tcm, tcm_alloc_inst, tcm_alloc);
-static int tcm_init(void)
+static int __init tcm_init(void)
{
int ret;
@@ -2322,7 +2322,7 @@ static int tcm_init(void)
}
module_init(tcm_init);
-static void tcm_exit(void)
+static void __exit tcm_exit(void)
{
target_unregister_template(&usbg_ops);
usb_function_unregister(&tcmusb_func);
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 71669e0e4d00..6e196e06181e 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -421,7 +421,7 @@ uvc_register_video(struct uvc_device *uvc)
int ret;
/* TODO reference counting. */
- memset(&uvc->vdev, 0, sizeof(uvc->video));
+ memset(&uvc->vdev, 0, sizeof(uvc->vdev));
uvc->vdev.v4l2_dev = &uvc->v4l2_dev;
uvc->vdev.v4l2_dev->dev = &cdev->gadget->dev;
uvc->vdev.fops = &uvc_v4l2_fops;
@@ -430,7 +430,7 @@ uvc_register_video(struct uvc_device *uvc)
uvc->vdev.vfl_dir = VFL_DIR_TX;
uvc->vdev.lock = &uvc->video.mutex;
uvc->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
- strlcpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name));
+ strscpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name));
video_set_drvdata(&uvc->vdev, uvc);
@@ -888,6 +888,7 @@ static void uvc_free(struct usb_function *f)
struct uvc_device *uvc = to_uvc(f);
struct f_uvc_opts *opts = container_of(f->fi, struct f_uvc_opts,
func_inst);
+ config_item_put(&uvc->header->item);
--opts->refcnt;
kfree(uvc);
}
@@ -897,10 +898,14 @@ static void uvc_function_unbind(struct usb_configuration *c,
{
struct usb_composite_dev *cdev = c->cdev;
struct uvc_device *uvc = to_uvc(f);
+ struct uvc_video *video = &uvc->video;
long wait_ret = 1;
uvcg_info(f, "%s()\n", __func__);
+ if (video->async_wq)
+ destroy_workqueue(video->async_wq);
+
/*
* If we know we're connected via v4l2, then there should be a cleanup
* of the device from userspace either via UVC_EVENT_DISCONNECT or
@@ -941,6 +946,7 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
struct uvc_device *uvc;
struct f_uvc_opts *opts;
struct uvc_descriptor_header **strm_cls;
+ struct config_item *streaming, *header, *h;
uvc = kzalloc(sizeof(*uvc), GFP_KERNEL);
if (uvc == NULL)
@@ -973,6 +979,28 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
uvc->desc.fs_streaming = opts->fs_streaming;
uvc->desc.hs_streaming = opts->hs_streaming;
uvc->desc.ss_streaming = opts->ss_streaming;
+
+ streaming = config_group_find_item(&opts->func_inst.group, "streaming");
+ if (!streaming)
+ goto err_config;
+
+ header = config_group_find_item(to_config_group(streaming), "header");
+ config_item_put(streaming);
+ if (!header)
+ goto err_config;
+
+ h = config_group_find_item(to_config_group(header), "h");
+ config_item_put(header);
+ if (!h)
+ goto err_config;
+
+ uvc->header = to_uvcg_streaming_header(h);
+ if (!uvc->header->linked) {
+ mutex_unlock(&opts->lock);
+ kfree(uvc);
+ return ERR_PTR(-EBUSY);
+ }
+
++opts->refcnt;
mutex_unlock(&opts->lock);
@@ -988,6 +1016,11 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
uvc->func.bind_deactivated = true;
return &uvc->func;
+
+err_config:
+ mutex_unlock(&opts->lock);
+ kfree(uvc);
+ return ERR_PTR(-ENOENT);
}
DECLARE_USB_FUNCTION_INIT(uvc, uvc_alloc_inst, uvc_alloc);
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index 713efd9aefde..29bf8664bf58 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -869,7 +869,7 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser);
static inline int rndis_get_nr(void)
{
- return ida_simple_get(&rndis_ida, 0, 0, GFP_KERNEL);
+ return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL);
}
static inline void rndis_put_nr(int nr)
@@ -1105,7 +1105,7 @@ static int rndis_proc_show(struct seq_file *m, void *v)
"used : %s\n"
"state : %s\n"
"medium : 0x%08X\n"
- "speed : %d\n"
+ "speed : %u\n"
"cable : %s\n"
"vendor ID : 0x%08X\n"
"vendor : %s\n",
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 7887def05dc2..e06022873df1 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -144,10 +144,10 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
{
struct eth_dev *dev = netdev_priv(net);
- strlcpy(p->driver, "g_ether", sizeof(p->driver));
- strlcpy(p->version, UETH__VERSION, sizeof(p->version));
- strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version));
- strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info));
+ strscpy(p->driver, "g_ether", sizeof(p->driver));
+ strscpy(p->version, UETH__VERSION, sizeof(p->version));
+ strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version));
+ strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info));
}
/* REVISIT can also support:
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 6f68cbeeee7c..7538279f9817 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1443,7 +1443,7 @@ void gserial_resume(struct gserial *gser)
}
EXPORT_SYMBOL_GPL(gserial_resume);
-static int userial_init(void)
+static int __init userial_init(void)
{
struct tty_driver *driver;
unsigned i;
@@ -1496,7 +1496,7 @@ fail:
}
module_init(userial_init);
-static void userial_cleanup(void)
+static void __exit userial_cleanup(void)
{
tty_unregister_driver(gs_tty_driver);
tty_driver_kref_put(gs_tty_driver);
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 58e383afdd44..40226b1f7e14 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -88,6 +88,7 @@ struct uvc_video {
struct usb_ep *ep;
struct work_struct pump;
+ struct workqueue_struct *async_wq;
/* Frame parameters */
u8 bpp;
@@ -133,6 +134,8 @@ struct uvc_device {
bool func_connected;
wait_queue_head_t func_connected_queue;
+ struct uvcg_streaming_header *header;
+
/* Descriptors */
struct {
const struct uvc_descriptor_header * const *fs_control;
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index fd8f73bb726d..c4ed48d6b8a4 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -18,12 +18,161 @@
#include <media/v4l2-dev.h>
#include <media/v4l2-event.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-uvc.h>
#include "f_uvc.h"
#include "uvc.h"
#include "uvc_queue.h"
#include "uvc_video.h"
#include "uvc_v4l2.h"
+#include "uvc_configfs.h"
+
+static struct uvc_format_desc *to_uvc_format(struct uvcg_format *uformat)
+{
+ char guid[16] = UVC_GUID_FORMAT_MJPEG;
+ struct uvc_format_desc *format;
+ struct uvcg_uncompressed *unc;
+
+ if (uformat->type == UVCG_UNCOMPRESSED) {
+ unc = to_uvcg_uncompressed(&uformat->group.cg_item);
+ if (!unc)
+ return ERR_PTR(-EINVAL);
+
+ memcpy(guid, unc->desc.guidFormat, sizeof(guid));
+ }
+
+ format = uvc_format_by_guid(guid);
+ if (!format)
+ return ERR_PTR(-EINVAL);
+
+ return format;
+}
+
+static int uvc_v4l2_get_bytesperline(struct uvcg_format *uformat,
+ struct uvcg_frame *uframe)
+{
+ struct uvcg_uncompressed *u;
+
+ if (uformat->type == UVCG_UNCOMPRESSED) {
+ u = to_uvcg_uncompressed(&uformat->group.cg_item);
+ if (!u)
+ return 0;
+
+ return u->desc.bBitsPerPixel * uframe->frame.w_width / 8;
+ }
+
+ return 0;
+}
+
+static int uvc_get_frame_size(struct uvcg_format *uformat,
+ struct uvcg_frame *uframe)
+{
+ unsigned int bpl = uvc_v4l2_get_bytesperline(uformat, uframe);
+
+ return bpl ? bpl * uframe->frame.w_height :
+ uframe->frame.dw_max_video_frame_buffer_size;
+}
+
+static struct uvcg_format *find_format_by_index(struct uvc_device *uvc, int index)
+{
+ struct uvcg_format_ptr *format;
+ struct uvcg_format *uformat = NULL;
+ int i = 1;
+
+ list_for_each_entry(format, &uvc->header->formats, entry) {
+ if (index == i) {
+ uformat = format->fmt;
+ break;
+ }
+ i++;
+ }
+
+ return uformat;
+}
+
+static struct uvcg_frame *find_frame_by_index(struct uvc_device *uvc,
+ struct uvcg_format *uformat,
+ int index)
+{
+ struct uvcg_format_ptr *format;
+ struct uvcg_frame_ptr *frame;
+ struct uvcg_frame *uframe = NULL;
+
+ list_for_each_entry(format, &uvc->header->formats, entry) {
+ if (format->fmt->type != uformat->type)
+ continue;
+ list_for_each_entry(frame, &format->fmt->frames, entry) {
+ if (index == frame->frm->frame.b_frame_index) {
+ uframe = frame->frm;
+ break;
+ }
+ }
+ }
+
+ return uframe;
+}
+
+static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc,
+ u32 pixelformat)
+{
+ struct uvcg_format_ptr *format;
+ struct uvcg_format *uformat = NULL;
+
+ list_for_each_entry(format, &uvc->header->formats, entry) {
+ struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt);
+
+ if (fmtdesc->fcc == pixelformat) {
+ uformat = format->fmt;
+ break;
+ }
+ }
+
+ return uformat;
+}
+
+static struct uvcg_frame *find_closest_frame_by_size(struct uvc_device *uvc,
+ struct uvcg_format *uformat,
+ u16 rw, u16 rh)
+{
+ struct uvc_video *video = &uvc->video;
+ struct uvcg_format_ptr *format;
+ struct uvcg_frame_ptr *frame;
+ struct uvcg_frame *uframe = NULL;
+ unsigned int d, maxd;
+
+ /* Find the closest image size. The distance between image sizes is
+ * the size in pixels of the non-overlapping regions between the
+ * requested size and the frame-specified size.
+ */
+ maxd = (unsigned int)-1;
+
+ list_for_each_entry(format, &uvc->header->formats, entry) {
+ if (format->fmt->type != uformat->type)
+ continue;
+
+ list_for_each_entry(frame, &format->fmt->frames, entry) {
+ u16 w, h;
+
+ w = frame->frm->frame.w_width;
+ h = frame->frm->frame.w_height;
+
+ d = min(w, rw) * min(h, rh);
+ d = w*h + rw*rh - 2*d;
+ if (d < maxd) {
+ maxd = d;
+ uframe = frame->frm;
+ }
+
+ if (maxd == 0)
+ break;
+ }
+ }
+
+ if (!uframe)
+ uvcg_dbg(&video->uvc->func, "Unsupported size %ux%u\n", rw, rh);
+
+ return uframe;
+}
/* --------------------------------------------------------------------------
* Requests handling
@@ -67,9 +216,9 @@ uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
struct uvc_device *uvc = video_get_drvdata(vdev);
struct usb_composite_dev *cdev = uvc->func.config->cdev;
- strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
- strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
- strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
+ strscpy(cap->driver, "g_uvc", sizeof(cap->driver));
+ strscpy(cap->card, cdev->gadget->name, sizeof(cap->card));
+ strscpy(cap->bus_info, dev_name(&cdev->gadget->dev),
sizeof(cap->bus_info));
return 0;
}
@@ -135,6 +284,139 @@ uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt)
}
static int
+uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_device *uvc = video_get_drvdata(vdev);
+ struct uvc_video *video = &uvc->video;
+ struct uvcg_format *uformat;
+ struct uvcg_frame *uframe;
+ u8 *fcc;
+
+ if (fmt->type != video->queue.queue.type)
+ return -EINVAL;
+
+ fcc = (u8 *)&fmt->fmt.pix.pixelformat;
+ uvcg_dbg(&uvc->func, "Trying format 0x%08x (%c%c%c%c): %ux%u\n",
+ fmt->fmt.pix.pixelformat,
+ fcc[0], fcc[1], fcc[2], fcc[3],
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+
+ uformat = find_format_by_pix(uvc, fmt->fmt.pix.pixelformat);
+ if (!uformat)
+ return -EINVAL;
+
+ uframe = find_closest_frame_by_size(uvc, uformat,
+ fmt->fmt.pix.width, fmt->fmt.pix.height);
+ if (!uframe)
+ return -EINVAL;
+
+ fmt->fmt.pix.width = uframe->frame.w_width;
+ fmt->fmt.pix.height = uframe->frame.w_height;
+ fmt->fmt.pix.field = V4L2_FIELD_NONE;
+ fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe);
+ fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe);
+ fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc;
+ fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+ fmt->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int
+uvc_v4l2_enum_frameintervals(struct file *file, void *fh,
+ struct v4l2_frmivalenum *fival)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_device *uvc = video_get_drvdata(vdev);
+ struct uvcg_format *uformat = NULL;
+ struct uvcg_frame *uframe = NULL;
+ struct uvcg_frame_ptr *frame;
+
+ uformat = find_format_by_pix(uvc, fival->pixel_format);
+ if (!uformat)
+ return -EINVAL;
+
+ list_for_each_entry(frame, &uformat->frames, entry) {
+ if (frame->frm->frame.w_width == fival->width &&
+ frame->frm->frame.w_height == fival->height) {
+ uframe = frame->frm;
+ break;
+ }
+ }
+ if (!uframe)
+ return -EINVAL;
+
+ if (fival->index >= uframe->frame.b_frame_interval_type)
+ return -EINVAL;
+
+ fival->discrete.numerator =
+ uframe->dw_frame_interval[fival->index];
+
+ /* TODO: handle V4L2_FRMIVAL_TYPE_STEPWISE */
+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+ fival->discrete.denominator = 10000000;
+ v4l2_simplify_fraction(&fival->discrete.numerator,
+ &fival->discrete.denominator, 8, 333);
+
+ return 0;
+}
+
+static int
+uvc_v4l2_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_device *uvc = video_get_drvdata(vdev);
+ struct uvcg_format *uformat = NULL;
+ struct uvcg_frame *uframe = NULL;
+
+ uformat = find_format_by_pix(uvc, fsize->pixel_format);
+ if (!uformat)
+ return -EINVAL;
+
+ if (fsize->index >= uformat->num_frames)
+ return -EINVAL;
+
+ uframe = find_frame_by_index(uvc, uformat, fsize->index + 1);
+ if (!uframe)
+ return -EINVAL;
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = uframe->frame.w_width;
+ fsize->discrete.height = uframe->frame.w_height;
+
+ return 0;
+}
+
+static int
+uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+ struct video_device *vdev = video_devdata(file);
+ struct uvc_device *uvc = video_get_drvdata(vdev);
+ struct uvc_format_desc *fmtdesc;
+ struct uvcg_format *uformat;
+
+ if (f->index >= uvc->header->num_fmt)
+ return -EINVAL;
+
+ uformat = find_format_by_index(uvc, f->index + 1);
+ if (!uformat)
+ return -EINVAL;
+
+ if (uformat->type != UVCG_UNCOMPRESSED)
+ f->flags |= V4L2_FMT_FLAG_COMPRESSED;
+
+ fmtdesc = to_uvc_format(uformat);
+ f->pixelformat = fmtdesc->fcc;
+
+ strscpy(f->description, fmtdesc->name, sizeof(f->description));
+ f->description[strlen(fmtdesc->name) - 1] = 0;
+
+ return 0;
+}
+
+static int
uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b)
{
struct video_device *vdev = video_devdata(file);
@@ -170,7 +452,7 @@ uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
return ret;
if (uvc->state == UVC_STATE_STREAMING)
- schedule_work(&video->pump);
+ queue_work(video->async_wq, &video->pump);
return ret;
}
@@ -298,8 +580,12 @@ uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio,
const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = {
.vidioc_querycap = uvc_v4l2_querycap,
+ .vidioc_try_fmt_vid_out = uvc_v4l2_try_format,
.vidioc_g_fmt_vid_out = uvc_v4l2_get_format,
.vidioc_s_fmt_vid_out = uvc_v4l2_set_format,
+ .vidioc_enum_frameintervals = uvc_v4l2_enum_frameintervals,
+ .vidioc_enum_framesizes = uvc_v4l2_enum_framesizes,
+ .vidioc_enum_fmt_vid_out = uvc_v4l2_enum_format,
.vidioc_reqbufs = uvc_v4l2_reqbufs,
.vidioc_querybuf = uvc_v4l2_querybuf,
.vidioc_qbuf = uvc_v4l2_qbuf,
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index c00ce0e91f5d..bb037fcc90e6 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -277,7 +277,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
spin_unlock_irqrestore(&video->req_lock, flags);
if (uvc->state == UVC_STATE_STREAMING)
- schedule_work(&video->pump);
+ queue_work(video->async_wq, &video->pump);
}
static int
@@ -485,7 +485,7 @@ int uvcg_video_enable(struct uvc_video *video, int enable)
video->req_int_count = 0;
- schedule_work(&video->pump);
+ queue_work(video->async_wq, &video->pump);
return ret;
}
@@ -499,6 +499,11 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc)
spin_lock_init(&video->req_lock);
INIT_WORK(&video->pump, uvcg_video_pump);
+ /* Allocate a work queue for asynchronous video pump handler. */
+ video->async_wq = alloc_workqueue("uvcgadget", WQ_UNBOUND | WQ_HIGHPRI, 0);
+ if (!video->async_wq)
+ return -EINVAL;
+
video->uvc = uvc;
video->fcc = V4L2_PIX_FMT_YUYV;
video->bpp = 16;
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index 728987280373..a9a7b3fc60ec 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -994,7 +994,7 @@ static const struct usb_gadget_ops at91_udc_ops = {
.udc_stop = at91_stop,
/*
- * VBUS-powered devices may also also want to support bigger
+ * VBUS-powered devices may also want to support bigger
* power budgets after an appropriate SET_CONFIGURATION.
*/
/* .vbus_power = at91_vbus_power, */
@@ -1779,12 +1779,14 @@ static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
board->vbus_polled = 1;
- board->vbus_pin = gpiod_get_from_of_node(np, "atmel,vbus-gpio", 0,
- GPIOD_IN, "udc_vbus");
+ board->vbus_pin = fwnode_gpiod_get_index(of_fwnode_handle(np),
+ "atmel,vbus", 0, GPIOD_IN,
+ "udc_vbus");
if (IS_ERR(board->vbus_pin))
board->vbus_pin = NULL;
- board->pullup_pin = gpiod_get_from_of_node(np, "atmel,pullup-gpio", 0,
+ board->pullup_pin = fwnode_gpiod_get_index(of_fwnode_handle(np),
+ "atmel,pullup", 0,
GPIOD_ASIS, "udc_pullup");
if (IS_ERR(board->pullup_pin))
board->pullup_pin = NULL;
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index c97cd4bc817c..84605a4d0715 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -91,7 +91,7 @@ module_param(dma_mode, ushort, 0644);
* mode 2 == ep-a 1k, ep-b 1k, ep-c 512db
* mode 3 == ep-a 1k, ep-b disabled, ep-c 512db
*/
-static ushort fifo_mode = 0;
+static ushort fifo_mode;
module_param(fifo_mode, ushort, 0644);
/*
@@ -100,7 +100,7 @@ module_param(fifo_mode, ushort, 0644);
* USB suspend requests will be ignored. This is acceptable for
* self-powered devices. For bus powered devices set this to 1.
*/
-static ushort enable_suspend = 0;
+static ushort enable_suspend;
module_param(enable_suspend, ushort, 0644);
static void assert_out_naking(struct net2272_ep *ep, const char *where)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 61cabb9de6ae..bea346e362b2 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2234,7 +2234,7 @@ static int proc_otg_show(struct seq_file *s)
char *ctrl_name = "(UNKNOWN)";
tmp = omap_readl(OTG_REV);
- ctrl_name = "tranceiver_ctrl";
+ ctrl_name = "transceiver_ctrl";
trans = omap_readw(USB_TRANSCEIVER_CTRL);
seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
tmp >> 4, tmp & 0xf, ctrl_name, trans);
@@ -2558,7 +2558,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
/* set up driver data structures */
BUG_ON(strlen(name) >= sizeof ep->name);
- strlcpy(ep->name, name, sizeof ep->name);
+ strscpy(ep->name, name, sizeof(ep->name));
INIT_LIST_HEAD(&ep->queue);
INIT_LIST_HEAD(&ep->iso);
ep->bEndpointAddress = addr;
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 648be3fd476a..615ba0a6fbee 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -17,6 +17,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -38,16 +39,16 @@
#define USB3_USB20_CON 0x204
#define USB3_USB30_CON 0x208
#define USB3_USB_STA 0x210
-#define USB3_DRD_CON 0x218
+#define USB3_DRD_CON(p) ((p)->is_rzv2m ? 0x400 : 0x218)
#define USB3_USB_INT_STA_1 0x220
#define USB3_USB_INT_STA_2 0x224
#define USB3_USB_INT_ENA_1 0x228
#define USB3_USB_INT_ENA_2 0x22c
#define USB3_STUP_DAT_0 0x230
#define USB3_STUP_DAT_1 0x234
-#define USB3_USB_OTG_STA 0x268
-#define USB3_USB_OTG_INT_STA 0x26c
-#define USB3_USB_OTG_INT_ENA 0x270
+#define USB3_USB_OTG_STA(p) ((p)->is_rzv2m ? 0x410 : 0x268)
+#define USB3_USB_OTG_INT_STA(p) ((p)->is_rzv2m ? 0x414 : 0x26c)
+#define USB3_USB_OTG_INT_ENA(p) ((p)->is_rzv2m ? 0x418 : 0x270)
#define USB3_P0_MOD 0x280
#define USB3_P0_CON 0x288
#define USB3_P0_STA 0x28c
@@ -135,6 +136,8 @@
#define USB_STA_VBUS_STA BIT(0)
/* DRD_CON */
+#define DRD_CON_PERI_RST BIT(31) /* rzv2m only */
+#define DRD_CON_HOST_RST BIT(30) /* rzv2m only */
#define DRD_CON_PERI_CON BIT(24)
#define DRD_CON_VBOUT BIT(0)
@@ -155,7 +158,7 @@
#define USB_INT_2_PIPE(n) BIT(n)
/* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */
-#define USB_OTG_IDMON BIT(4)
+#define USB_OTG_IDMON(p) ((p)->is_rzv2m ? BIT(0) : BIT(4))
/* P0_MOD */
#define P0_MOD_DIR BIT(6)
@@ -255,7 +258,7 @@
#define USB3_EP0_SS_MAX_PACKET_SIZE 512
#define USB3_EP0_HSFS_MAX_PACKET_SIZE 64
#define USB3_EP0_BUF_SIZE 8
-#define USB3_MAX_NUM_PIPES 6 /* This includes PIPE 0 */
+#define USB3_MAX_NUM_PIPES(p) ((p)->is_rzv2m ? 16 : 6) /* This includes PIPE 0 */
#define USB3_WAIT_US 3
#define USB3_DMA_NUM_SETTING_AREA 4
/*
@@ -326,10 +329,13 @@ struct renesas_usb3_priv {
int num_ramif;
int ramsize_per_pipe; /* unit = bytes */
bool workaround_for_vbus; /* if true, don't check vbus signal */
+ bool is_rzv2m; /* if true, RZ/V2M SoC */
};
struct renesas_usb3 {
void __iomem *reg;
+ struct reset_control *drd_rstc;
+ struct reset_control *usbp_rstc;
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
@@ -363,6 +369,7 @@ struct renesas_usb3 {
bool forced_b_device;
bool start_to_connect;
bool role_sw_by_connector;
+ bool is_rzv2m;
};
#define gadget_to_renesas_usb3(_gadget) \
@@ -467,7 +474,7 @@ static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num)
static bool usb3_is_host(struct renesas_usb3 *usb3)
{
- return !(usb3_read(usb3, USB3_DRD_CON) & DRD_CON_PERI_CON);
+ return !(usb3_read(usb3, USB3_DRD_CON(usb3)) & DRD_CON_PERI_CON);
}
static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
@@ -674,10 +681,20 @@ static void renesas_usb3_role_work(struct work_struct *work)
static void usb3_set_mode(struct renesas_usb3 *usb3, bool host)
{
+ if (usb3->is_rzv2m) {
+ if (host) {
+ usb3_set_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3));
+ usb3_clear_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3));
+ } else {
+ usb3_set_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3));
+ usb3_clear_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3));
+ }
+ }
+
if (host)
- usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+ usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3));
else
- usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+ usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3));
}
static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host)
@@ -693,9 +710,9 @@ static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host)
static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable)
{
if (enable)
- usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
+ usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3));
else
- usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
+ usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3));
}
static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
@@ -716,7 +733,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
static bool usb3_is_a_device(struct renesas_usb3 *usb3)
{
- return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON);
+ return !(usb3_read(usb3, USB3_USB_OTG_STA(usb3)) & USB_OTG_IDMON(usb3));
}
static void usb3_check_id(struct renesas_usb3 *usb3)
@@ -739,8 +756,8 @@ static void renesas_usb3_init_controller(struct renesas_usb3 *usb3)
usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL |
USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP,
USB3_USB_COM_CON);
- usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA);
- usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA);
+ usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_STA(usb3));
+ usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_ENA(usb3));
usb3_check_id(usb3);
usb3_check_vbus(usb3);
@@ -750,7 +767,7 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3)
{
usb3_disconnect(usb3);
usb3_write(usb3, 0, USB3_P0_INT_ENA);
- usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA);
+ usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA(usb3));
usb3_write(usb3, 0, USB3_USB_INT_ENA_1);
usb3_write(usb3, 0, USB3_USB_INT_ENA_2);
usb3_write(usb3, 0, USB3_AXI_INT_ENA);
@@ -2005,9 +2022,15 @@ static void usb3_irq_idmon_change(struct renesas_usb3 *usb3)
usb3_check_id(usb3);
}
-static void usb3_irq_otg_int(struct renesas_usb3 *usb3, u32 otg_int_sta)
+static void usb3_irq_otg_int(struct renesas_usb3 *usb3)
{
- if (otg_int_sta & USB_OTG_IDMON)
+ u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA(usb3));
+
+ otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA(usb3));
+ if (otg_int_sta)
+ usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA(usb3));
+
+ if (otg_int_sta & USB_OTG_IDMON(usb3))
usb3_irq_idmon_change(usb3);
}
@@ -2015,7 +2038,6 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3)
{
u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1);
u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2);
- u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA);
int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1);
if (int_sta_1) {
@@ -2027,11 +2049,8 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3)
if (int_sta_2)
usb3_irq_epc_int_2(usb3, int_sta_2);
- otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA);
- if (otg_int_sta) {
- usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA);
- usb3_irq_otg_int(usb3, otg_int_sta);
- }
+ if (!usb3->is_rzv2m)
+ usb3_irq_otg_int(usb3);
}
static void usb3_irq_dma_int(struct renesas_usb3 *usb3, u32 dma_sta)
@@ -2085,6 +2104,15 @@ static irqreturn_t renesas_usb3_irq(int irq, void *_usb3)
return ret;
}
+static irqreturn_t renesas_usb3_otg_irq(int irq, void *_usb3)
+{
+ struct renesas_usb3 *usb3 = _usb3;
+
+ usb3_irq_otg_int(usb3);
+
+ return IRQ_HANDLED;
+}
+
static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep,
const struct usb_endpoint_descriptor *desc)
{
@@ -2571,6 +2599,8 @@ static int renesas_usb3_remove(struct platform_device *pdev)
usb_role_switch_unregister(usb3->role_sw);
usb_del_gadget_udc(&usb3->gadget);
+ reset_control_assert(usb3->usbp_rstc);
+ reset_control_assert(usb3->drd_rstc);
renesas_usb3_dma_free_prd(usb3, &pdev->dev);
__renesas_usb3_ep_free_request(usb3->ep0_req);
@@ -2589,8 +2619,8 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 /
priv->ramsize_per_pipe + 1;
- if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES)
- usb3->num_usb3_eps = USB3_MAX_NUM_PIPES;
+ if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES(usb3))
+ usb3->num_usb3_eps = USB3_MAX_NUM_PIPES(usb3);
usb3->usb3_ep = devm_kcalloc(dev,
usb3->num_usb3_eps, sizeof(*usb3_ep),
@@ -2707,6 +2737,13 @@ static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = {
.workaround_for_vbus = true,
};
+static const struct renesas_usb3_priv renesas_usb3_priv_rzv2m = {
+ .ramsize_per_ramif = SZ_16K,
+ .num_ramif = 1,
+ .ramsize_per_pipe = SZ_4K,
+ .is_rzv2m = true,
+};
+
static const struct of_device_id usb3_of_match[] = {
{
.compatible = "renesas,r8a774c0-usb3-peri",
@@ -2718,6 +2755,9 @@ static const struct of_device_id usb3_of_match[] = {
.compatible = "renesas,r8a77990-usb3-peri",
.data = &renesas_usb3_priv_r8a77990,
}, {
+ .compatible = "renesas,rzv2m-usb3-peri",
+ .data = &renesas_usb3_priv_rzv2m,
+ }, {
.compatible = "renesas,rcar-gen3-usb3-peri",
.data = &renesas_usb3_priv_gen3,
},
@@ -2748,7 +2788,7 @@ static struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
static int renesas_usb3_probe(struct platform_device *pdev)
{
struct renesas_usb3 *usb3;
- int irq, ret;
+ int irq, drd_irq, ret;
const struct renesas_usb3_priv *priv;
const struct soc_device_attribute *attr;
@@ -2762,10 +2802,18 @@ static int renesas_usb3_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ if (priv->is_rzv2m) {
+ drd_irq = platform_get_irq_byname(pdev, "drd");
+ if (drd_irq < 0)
+ return drd_irq;
+ }
+
usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return -ENOMEM;
+ usb3->is_rzv2m = priv->is_rzv2m;
+
usb3->reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(usb3->reg))
return PTR_ERR(usb3->reg);
@@ -2787,6 +2835,14 @@ static int renesas_usb3_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
+ if (usb3->is_rzv2m) {
+ ret = devm_request_irq(&pdev->dev, drd_irq,
+ renesas_usb3_otg_irq, 0,
+ dev_name(&pdev->dev), usb3);
+ if (ret < 0)
+ return ret;
+ }
+
INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work);
usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable);
if (IS_ERR(usb3->extcon))
@@ -2817,10 +2873,27 @@ static int renesas_usb3_probe(struct platform_device *pdev)
goto err_add_udc;
}
+ usb3->drd_rstc = devm_reset_control_get_optional_shared(&pdev->dev,
+ "drd_reset");
+ if (IS_ERR(usb3->drd_rstc)) {
+ ret = PTR_ERR(usb3->drd_rstc);
+ goto err_add_udc;
+ }
+
+ usb3->usbp_rstc = devm_reset_control_get_optional_shared(&pdev->dev,
+ "aresetn_p");
+ if (IS_ERR(usb3->usbp_rstc)) {
+ ret = PTR_ERR(usb3->usbp_rstc);
+ goto err_add_udc;
+ }
+
+ reset_control_deassert(usb3->drd_rstc);
+ reset_control_deassert(usb3->usbp_rstc);
+
pm_runtime_enable(&pdev->dev);
ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget);
if (ret < 0)
- goto err_add_udc;
+ goto err_reset;
ret = device_create_file(&pdev->dev, &dev_attr_role);
if (ret < 0)
@@ -2858,6 +2931,10 @@ static int renesas_usb3_probe(struct platform_device *pdev)
err_dev_create:
usb_del_gadget_udc(&usb3->gadget);
+err_reset:
+ reset_control_assert(usb3->usbp_rstc);
+ reset_control_assert(usb3->drd_rstc);
+
err_add_udc:
renesas_usb3_dma_free_prd(usb3, &pdev->dev);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index c6625aeb7bca..8c57b191e52b 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -23,7 +23,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/prefetch.h>
#include <linux/io.h>
@@ -1419,8 +1419,7 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
- if (udc_info && (udc_info->udc_command ||
- gpio_is_valid(udc_info->pullup_pin))) {
+ if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) {
if (is_on)
s3c2410_udc_enable(udc);
@@ -1467,9 +1466,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
- value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0;
- if (udc_info->vbus_pin_inverted)
- value = !value;
+ value = gpiod_get_value(dev->vbus_gpiod);
if (value != dev->vbus)
s3c2410_udc_vbus_session(&dev->gadget, value);
@@ -1504,14 +1501,15 @@ static const struct usb_gadget_ops s3c2410_ops = {
.udc_stop = s3c2410_udc_stop,
};
-static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
+static void s3c2410_udc_command(struct s3c2410_udc *udc,
+ enum s3c2410_udc_cmd_e cmd)
{
if (!udc_info)
return;
if (udc_info->udc_command) {
udc_info->udc_command(cmd);
- } else if (gpio_is_valid(udc_info->pullup_pin)) {
+ } else if (udc->pullup_gpiod) {
int value;
switch (cmd) {
@@ -1524,9 +1522,8 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
default:
return;
}
- value ^= udc_info->pullup_pin_inverted;
- gpio_set_value(udc_info->pullup_pin, value);
+ gpiod_set_value(udc->pullup_gpiod, value);
}
}
@@ -1551,7 +1548,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev)
udc_write(0x1F, S3C2410_UDC_EP_INT_REG);
/* Good bye, cruel world */
- s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
+ s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE);
/* Set speed to unknown */
dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1613,7 +1610,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG);
/* time to say "hello, world" */
- s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
+ s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE);
}
static int s3c2410_udc_start(struct usb_gadget *g,
@@ -1802,14 +1799,15 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
dev_dbg(dev, "got irq %i\n", irq_usbd);
- if (udc_info && udc_info->vbus_pin > 0) {
- retval = gpio_request(udc_info->vbus_pin, "udc vbus");
- if (retval < 0) {
- dev_err(dev, "cannot claim vbus pin\n");
- goto err_int;
- }
+ udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN);
+ if (IS_ERR(udc->vbus_gpiod)) {
+ retval = PTR_ERR(udc->vbus_gpiod);
+ goto err_int;
+ }
+ if (udc->vbus_gpiod) {
+ gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus");
- irq = gpio_to_irq(udc_info->vbus_pin);
+ irq = gpiod_to_irq(udc->vbus_gpiod);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
retval = irq;
@@ -1833,16 +1831,12 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
udc->vbus = 1;
}
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin)) {
-
- retval = gpio_request_one(udc_info->pullup_pin,
- udc_info->vbus_pin_inverted ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "udc pullup");
- if (retval)
- goto err_vbus_irq;
+ udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW);
+ if (IS_ERR(udc->pullup_gpiod)) {
+ retval = PTR_ERR(udc->pullup_gpiod);
+ goto err_vbus_irq;
}
+ gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup");
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
@@ -1856,15 +1850,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
return 0;
err_add_udc:
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
err_vbus_irq:
- if (udc_info && udc_info->vbus_pin > 0)
- free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
+ if (udc->vbus_gpiod)
+ free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
err_gpio_claim:
- if (udc_info && udc_info->vbus_pin > 0)
- gpio_free(udc_info->vbus_pin);
err_int:
free_irq(irq_usbd, udc);
err_udc_clk:
@@ -1885,7 +1874,6 @@ err_usb_bus_clk:
static int s3c2410_udc_remove(struct platform_device *pdev)
{
struct s3c2410_udc *udc = platform_get_drvdata(pdev);
- unsigned int irq;
dev_dbg(&pdev->dev, "%s()\n", __func__);
@@ -1895,14 +1883,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
usb_del_gadget_udc(&udc->gadget);
debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root));
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
-
- if (udc_info && udc_info->vbus_pin > 0) {
- irq = gpio_to_irq(udc_info->vbus_pin);
- free_irq(irq, udc);
- }
+ if (udc->vbus_gpiod)
+ free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
free_irq(irq_usbd, udc);
@@ -1926,14 +1908,18 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
static int
s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
{
- s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
+ struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+ s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE);
return 0;
}
static int s3c2410_udc_resume(struct platform_device *pdev)
{
- s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
+ struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+ s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE);
return 0;
}
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index 135a5bff3c74..cdbf202e5ee8 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -83,6 +83,9 @@ struct s3c2410_udc {
u32 port_status;
int ep0state;
+ struct gpio_desc *vbus_gpiod;
+ struct gpio_desc *pullup_gpiod;
+
unsigned got_irq : 1;
unsigned req_std : 1;
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 3c37effdfa64..76919d7570d2 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -2,7 +2,7 @@
/*
* NVIDIA Tegra XUSB device mode controller
*
- * Copyright (c) 2013-2019, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2015, Google Inc.
*/
@@ -702,6 +702,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
pm_runtime_get_sync(xudc->dev);
+ tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy);
+
err = phy_power_on(xudc->curr_utmi_phy);
if (err < 0)
dev_err(xudc->dev, "UTMI power on failed: %d\n", err);
@@ -756,6 +758,8 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
/* Make sure interrupt handler has completed before powergating. */
synchronize_irq(xudc->irq);
+ tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy);
+
err = phy_power_off(xudc->curr_utmi_phy);
if (err < 0)
dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fd9264cf6c87..247568bc17a2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -205,12 +205,12 @@ config USB_EHCI_FSL
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_HCD_NPCM7XX
- tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
- depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST
- default y if (USB_EHCI_HCD && ARCH_NPCM7XX)
+ tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
+ depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST
+ default y if (USB_EHCI_HCD && ARCH_NPCM)
help
Enables support for the on-chip EHCI controller on
- Nuvoton NPCM7XX chips.
+ Nuvoton NPCM chips.
config USB_EHCI_HCD_OMAP
tristate "EHCI support for OMAP3 and later chips"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 05d41fd65f25..8b775e7bab06 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -25,8 +25,6 @@
#define DRIVER_DESC "EHCI Atmel driver"
-static const char hcd_name[] = "ehci-atmel";
-
#define EHCI_INSNREG(index) ((index) * 4 + 0x90)
#define EHCI_INSNREG08_HSIC_EN BIT(2)
@@ -239,7 +237,6 @@ static int __init ehci_atmel_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides);
return platform_driver_register(&ehci_atmel_driver);
}
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 1a9b7572e17f..a333231616f4 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb.h>
@@ -32,7 +32,6 @@
(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
-static const char hcd_name[] = "ehci-exynos";
static struct hc_driver __read_mostly exynos_ehci_hc_driver;
#define PHY_NUMBER 3
@@ -132,20 +131,13 @@ static void exynos_ehci_phy_disable(struct device *dev)
static void exynos_setup_vbus_gpio(struct device *dev)
{
+ struct gpio_desc *gpio;
int err;
- int gpio;
- if (!dev->of_node)
- return;
-
- gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
- if (!gpio_is_valid(gpio))
- return;
-
- err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
- "ehci_vbus_gpio");
+ gpio = devm_gpiod_get_optional(dev, "samsung,vbus", GPIOD_OUT_HIGH);
+ err = PTR_ERR_OR_ZERO(gpio);
if (err)
- dev_err(dev, "can't request ehci vbus gpio %d", gpio);
+ dev_err(dev, "can't request ehci vbus gpio: %d\n", err);
}
static int exynos_ehci_probe(struct platform_device *pdev)
@@ -347,7 +339,6 @@ static int __init ehci_exynos_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides);
return platform_driver_register(&exynos_ehci_driver);
}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 896c0d107f72..9cea785934e5 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -722,8 +722,6 @@ static int __init ehci_fsl_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info(DRV_NAME ": " DRIVER_DESC "\n");
-
ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
fsl_ehci_hc_driver.product_desc =
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 684164fa9716..a1930db0da1c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1351,7 +1351,6 @@ static int __init ehci_hcd_init(void)
if (usb_disabled())
return -ENODEV;
- printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c
index 6b5a7a873e01..63af1a827fcb 100644
--- a/drivers/usb/host/ehci-npcm7xx.c
+++ b/drivers/usb/host/ehci-npcm7xx.c
@@ -22,19 +22,8 @@
#include "ehci.h"
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
-
#define DRIVER_DESC "EHCI npcm7xx driver"
-static const char hcd_name[] = "npcm7xx-ehci";
-
-#define USB2PHYCTL_OFFSET 0x144
-
-#define IPSRST2_OFFSET 0x24
-#define IPSRST3_OFFSET 0x34
-
-
static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver;
static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev)
@@ -60,52 +49,12 @@ static int npcm7xx_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
- struct regmap *gcr_regmap;
- struct regmap *rst_regmap;
const struct hc_driver *driver = &ehci_npcm7xx_hc_driver;
int irq;
int retval;
dev_dbg(&pdev->dev, "initializing npcm7xx ehci USB Controller\n");
- gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
- if (IS_ERR(gcr_regmap)) {
- dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-gcr\n",
- __func__);
- return PTR_ERR(gcr_regmap);
- }
-
- rst_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-rst");
- if (IS_ERR(rst_regmap)) {
- dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-rst\n",
- __func__);
- return PTR_ERR(rst_regmap);
- }
-
- /********* phy init ******/
- // reset usb host
- regmap_update_bits(rst_regmap, IPSRST2_OFFSET,
- (0x1 << 26), (0x1 << 26));
- regmap_update_bits(rst_regmap, IPSRST3_OFFSET,
- (0x1 << 25), (0x1 << 25));
- regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET,
- (0x1 << 28), 0);
-
- udelay(1);
-
- // enable phy
- regmap_update_bits(rst_regmap, IPSRST3_OFFSET,
- (0x1 << 25), 0);
-
- udelay(50); // enable phy
-
- regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET,
- (0x1 << 28), (0x1 << 28));
-
- // enable host
- regmap_update_bits(rst_regmap, IPSRST2_OFFSET,
- (0x1 << 26), 0);
-
if (usb_disabled())
return -ENODEV;
@@ -191,8 +140,6 @@ static int __init ehci_npcm7xx_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_npcm7xx_hc_driver, NULL);
return platform_driver_register(&npcm7xx_ehci_hcd_driver);
}
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 8c45bc17a580..7dd984722a7f 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -284,8 +284,6 @@ static int __init ehci_omap_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
return platform_driver_register(&ehci_hcd_omap_driver);
}
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 3626758b3e2a..a3454a3ea4e0 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -65,8 +65,6 @@ struct orion_ehci_hcd {
struct phy *phy;
};
-static const char hcd_name[] = "ehci-orion";
-
static struct hc_driver __read_mostly ehci_orion_hc_driver;
/*
@@ -361,8 +359,6 @@ static int __init ehci_orion_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
return platform_driver_register(&ehci_orion_driver);
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 9937c5a7efc2..17f8b6ea0c35 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -382,7 +382,7 @@ static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
if (is_bypassed_id(pdev))
return -ENODEV;
- return usb_hcd_pci_probe(pdev, id, &ehci_pci_hc_driver);
+ return usb_hcd_pci_probe(pdev, &ehci_pci_hc_driver);
}
static void ehci_pci_remove(struct pci_dev *pdev)
@@ -423,8 +423,6 @@ static int __init ehci_pci_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
/* Entries for the PCI suspend/resume callbacks are special */
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 6924f0316e9a..fe497c876d76 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -53,8 +53,6 @@ struct ehci_platform_priv {
struct delayed_work poll_work;
};
-static const char hcd_name[] = "ehci-platform";
-
static int ehci_platform_reset(struct usb_hcd *hcd)
{
struct platform_device *pdev = to_platform_device(hcd->self.controller);
@@ -529,8 +527,6 @@ static int __init ehci_platform_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
return platform_driver_register(&ehci_platform_driver);
}
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 807e64991e3e..666f5c4db25a 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -645,7 +645,7 @@ qh_urb_transaction (
token |= (1 /* "in" */ << 8);
/* else it's already initted to "out" pid (0 << 8) */
- maxpacket = usb_maxpacket(urb->dev, urb->pipe);
+ maxpacket = usb_endpoint_maxp(&urb->ep->desc);
/*
* buffer gets wrapped in one or more qtds;
@@ -1218,7 +1218,7 @@ static int ehci_submit_single_step_set_feature(
token |= (1 /* "in" */ << 8); /*This is IN stage*/
- maxpacket = usb_maxpacket(urb->dev, urb->pipe);
+ maxpacket = usb_endpoint_maxp(&urb->ep->desc);
qtd_fill(ehci, qtd, buf, len, token, maxpacket);
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 3694e450a11a..c4ddd1022f60 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -24,8 +24,6 @@
#define DRIVER_DESC "EHCI SPEAr driver"
-static const char hcd_name[] = "SPEAr-ehci";
-
struct spear_ehci {
struct clk *clk;
};
@@ -167,8 +165,6 @@ static int __init ehci_spear_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides);
return platform_driver_register(&spear_ehci_hcd_driver);
}
diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c
index f74433aac948..f731dc98c533 100644
--- a/drivers/usb/host/ehci-st.c
+++ b/drivers/usb/host/ehci-st.c
@@ -42,8 +42,6 @@ struct st_ehci_platform_priv {
#define hcd_to_ehci_priv(h) \
((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv)
-static const char hcd_name[] = "ehci-st";
-
#define EHCI_CAPS_SIZE 0x10
#define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84)
@@ -346,8 +344,6 @@ static int __init ehci_platform_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
return platform_driver_register(&ehci_platform_driver);
}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 2ba09c3fbc2f..95a44462bed0 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -25,8 +25,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
#include <soc/fsl/qe/qe.h>
#include <asm/fsl_gtm.h>
#include "fhci.h"
@@ -150,15 +150,15 @@ int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
u8 bits = 0;
/* check USBOE,if transmitting,exit */
- if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+ if (!gpiod_get_value(fhci->gpiods[GPIO_USBOE]))
return -1;
/* check USBRP */
- if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+ if (gpiod_get_value(fhci->gpiods[GPIO_USBRP]))
bits |= 0x2;
/* check USBRN */
- if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+ if (gpiod_get_value(fhci->gpiods[GPIO_USBRN]))
bits |= 0x1;
return bits;
@@ -630,40 +630,23 @@ static int of_fhci_probe(struct platform_device *ofdev)
/* GPIOs and pins */
for (i = 0; i < NUM_GPIOS; i++) {
- int gpio;
- enum of_gpio_flags flags;
-
- gpio = of_get_gpio_flags(node, i, &flags);
- fhci->gpios[i] = gpio;
- fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
-
- if (!gpio_is_valid(gpio)) {
- if (i < GPIO_SPEED) {
- dev_err(dev, "incorrect GPIO%d: %d\n",
- i, gpio);
- goto err_gpios;
- } else {
- dev_info(dev, "assuming board doesn't have "
- "%s gpio\n", i == GPIO_SPEED ?
- "speed" : "power");
- continue;
- }
- }
+ if (i < GPIO_SPEED)
+ fhci->gpiods[i] = devm_gpiod_get_index(dev,
+ NULL, i, GPIOD_IN);
+
+ else
+ fhci->gpiods[i] = devm_gpiod_get_index_optional(dev,
+ NULL, i, GPIOD_OUT_LOW);
- ret = gpio_request(gpio, dev_name(dev));
- if (ret) {
- dev_err(dev, "failed to request gpio %d", i);
+ if (IS_ERR(fhci->gpiods[i])) {
+ dev_err(dev, "incorrect GPIO%d: %ld\n",
+ i, PTR_ERR(fhci->gpiods[i]));
goto err_gpios;
}
-
- if (i >= GPIO_SPEED) {
- ret = gpio_direction_output(gpio, 0);
- if (ret) {
- dev_err(dev, "failed to set gpio %d as "
- "an output\n", i);
- i++;
- goto err_gpios;
- }
+ if (!fhci->gpiods[i]) {
+ dev_info(dev, "assuming board doesn't have "
+ "%s gpio\n", i == GPIO_SPEED ?
+ "speed" : "power");
}
}
@@ -766,10 +749,6 @@ err_pins:
while (--j >= 0)
qe_pin_free(fhci->pins[j]);
err_gpios:
- while (--i >= 0) {
- if (gpio_is_valid(fhci->gpios[i]))
- gpio_free(fhci->gpios[i]);
- }
cpm_muram_free(pram_addr);
err_pram:
iounmap(hcd->regs);
@@ -782,18 +761,12 @@ static int fhci_remove(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct fhci_hcd *fhci = hcd_to_fhci(hcd);
- int i;
int j;
usb_remove_hcd(hcd);
free_irq(fhci->timer->irq, hcd);
gtm_put_timer16(fhci->timer);
cpm_muram_free(cpm_muram_offset(fhci->pram));
- for (i = 0; i < NUM_GPIOS; i++) {
- if (!gpio_is_valid(fhci->gpios[i]))
- continue;
- gpio_free(fhci->gpios[i]);
- }
for (j = 0; j < NUM_PINS; j++)
qe_pin_free(fhci->pins[j]);
fhci_dfs_destroy(fhci);
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index c359dcdb9b13..5f48660ebdfa 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <soc/fsl/qe/qe.h>
#include "fhci.h"
@@ -38,13 +38,12 @@ static u8 root_hub_des[] = {
static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
{
- int gpio = fhci->gpios[gpio_nr];
- bool alow = fhci->alow_gpios[gpio_nr];
+ struct gpio_desc *gpiod = fhci->gpiods[gpio_nr];
- if (!gpio_is_valid(gpio))
+ if (!gpiod)
return;
- gpio_set_value(gpio, on ^ alow);
+ gpiod_set_value(gpiod, on);
mdelay(5);
}
@@ -129,9 +128,9 @@ void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
{
fhci_dbg(fhci, "-> %s\n", __func__);
- gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
- gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
- gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+ gpiod_direction_output(fhci->gpiods[GPIO_USBOE], 0);
+ gpiod_direction_output(fhci->gpiods[GPIO_USBTP], 0);
+ gpiod_direction_output(fhci->gpiods[GPIO_USBTN], 0);
mdelay(5);
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 81fbc019a9b3..1f57b0989485 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <linux/gpio/consumer.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/immap_qe.h>
@@ -242,8 +243,7 @@ struct fhci_hcd {
enum qe_clock fullspeed_clk;
enum qe_clock lowspeed_clk;
struct qe_pin *pins[NUM_PINS];
- int gpios[NUM_GPIOS];
- bool alow_gpios[NUM_GPIOS];
+ struct gpio_desc *gpiods[NUM_GPIOS];
struct qe_usb_ctlr __iomem *regs; /* I/O memory used to communicate */
struct fhci_pram __iomem *pram; /* Parameter RAM */
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index f8c111e08a0d..3d1dbcf4c073 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5692,7 +5692,6 @@ static int __init fotg210_hcd_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 98326465e2dc..533537ef3c21 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -62,8 +62,6 @@ struct ohci_at91_priv {
#define DRIVER_DESC "OHCI Atmel driver"
-static const char hcd_name[] = "ohci-atmel";
-
static struct hc_driver __read_mostly ohci_at91_hc_driver;
static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
@@ -699,7 +697,6 @@ static int __init ohci_at91_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
/*
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 1371b0c249ec..d4818e8d652b 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -551,7 +551,6 @@ static int __init ohci_da8xx_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
/*
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 5f5e8a64c8e2..8d7977fd5d3b 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -21,7 +21,6 @@
#define DRIVER_DESC "OHCI Exynos driver"
-static const char hcd_name[] = "ohci-exynos";
static struct hc_driver __read_mostly exynos_ohci_hc_driver;
#define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
@@ -310,7 +309,6 @@ static int __init ohci_exynos_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides);
return platform_driver_register(&exynos_ohci_driver);
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index c4c821c2288c..0457dd9f6c19 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1276,7 +1276,6 @@ static int __init ohci_hcd_mod_init(void)
if (usb_disabled())
return -ENODEV;
- printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
pr_debug ("%s: block sizes: ed %zd td %zd\n", hcd_name,
sizeof (struct ed), sizeof (struct td));
set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 106a6bcefb08..5b32e683e367 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -275,8 +275,6 @@ static int __init ohci_nxp_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_nxp_hc_driver, NULL);
return platform_driver_register(&ohci_hcd_nxp_driver);
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f5bc9c8bdc9a..cb29701df911 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -423,8 +423,6 @@ static int __init ohci_omap_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides);
return platform_driver_register(&ohci_hcd_omap_driver);
}
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 41efe927d8f3..d7b4f40f9ff4 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -282,7 +282,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
static int ohci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- return usb_hcd_pci_probe(dev, id, &ohci_pci_hc_driver);
+ return usb_hcd_pci_probe(dev, &ohci_pci_hc_driver);
}
/* pci driver glue; this is a "new style" PCI driver module */
@@ -306,8 +306,6 @@ static int __init ohci_pci_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
#ifdef CONFIG_PM
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 0adae6265127..a84305091c43 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -41,8 +41,6 @@ struct ohci_platform_priv {
struct reset_control *resets;
};
-static const char hcd_name[] = "ohci-platform";
-
static int ohci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -289,7 +287,7 @@ static int ohci_platform_suspend(struct device *dev)
return ret;
}
-static int ohci_platform_resume(struct device *dev)
+static int ohci_platform_resume_common(struct device *dev, bool hibernated)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
@@ -301,7 +299,7 @@ static int ohci_platform_resume(struct device *dev)
return err;
}
- ohci_resume(hcd, false);
+ ohci_resume(hcd, hibernated);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
@@ -309,6 +307,16 @@ static int ohci_platform_resume(struct device *dev)
return 0;
}
+
+static int ohci_platform_resume(struct device *dev)
+{
+ return ohci_platform_resume_common(dev, false);
+}
+
+static int ohci_platform_restore(struct device *dev)
+{
+ return ohci_platform_resume_common(dev, true);
+}
#endif /* CONFIG_PM_SLEEP */
static const struct of_device_id ohci_platform_ids[] = {
@@ -325,8 +333,16 @@ static const struct platform_device_id ohci_platform_table[] = {
};
MODULE_DEVICE_TABLE(platform, ohci_platform_table);
-static SIMPLE_DEV_PM_OPS(ohci_platform_pm_ops, ohci_platform_suspend,
- ohci_platform_resume);
+#ifdef CONFIG_PM_SLEEP
+static const struct dev_pm_ops ohci_platform_pm_ops = {
+ .suspend = ohci_platform_suspend,
+ .resume = ohci_platform_resume,
+ .freeze = ohci_platform_suspend,
+ .thaw = ohci_platform_resume,
+ .poweroff = ohci_platform_suspend,
+ .restore = ohci_platform_restore,
+};
+#endif
static struct platform_driver ohci_platform_driver = {
.id_table = ohci_platform_table,
@@ -335,7 +351,9 @@ static struct platform_driver ohci_platform_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ohci-platform",
+#ifdef CONFIG_PM_SLEEP
.pm = &ohci_platform_pm_ops,
+#endif
.of_match_table = ohci_platform_ids,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
}
@@ -346,8 +364,6 @@ static int __init ohci_platform_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
return platform_driver_register(&ohci_platform_driver);
}
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index ab4f610a0140..a1dad8745622 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -114,8 +114,6 @@
#define PXA_UHC_MAX_PORTNUM 3
-static const char hcd_name[] = "ohci-pxa27x";
-
static struct hc_driver __read_mostly ohci_pxa27x_hc_driver;
struct pxa27x_ohci {
@@ -608,8 +606,6 @@ static int __init ohci_pxa27x_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides);
ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 12264c048601..85a0a9ae0095 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -39,8 +39,6 @@
#define DRIVER_DESC "OHCI S3C2410 driver"
-static const char hcd_name[] = "ohci-s3c2410";
-
static struct clk *clk;
static struct clk *usb_clk;
@@ -474,7 +472,6 @@ static int __init ohci_s3c2410_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
/*
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 9b81f420656d..196951a27f3f 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -23,7 +23,6 @@
#define DRIVER_DESC "OHCI SPEAr driver"
-static const char hcd_name[] = "SPEAr-ohci";
struct spear_ohci {
struct clk *clk;
};
@@ -179,8 +178,6 @@ static int __init ohci_spear_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides);
return platform_driver_register(&spear_ohci_hcd_driver);
}
diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c
index ac796ccd93ef..82eef3c62e11 100644
--- a/drivers/usb/host/ohci-st.c
+++ b/drivers/usb/host/ohci-st.c
@@ -40,8 +40,6 @@ struct st_ohci_platform_priv {
#define hcd_to_ohci_priv(h) \
((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv)
-static const char hcd_name[] = "ohci-st";
-
static int st_ohci_platform_power_on(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -324,8 +322,6 @@ static int __init ohci_platform_init(void)
if (usb_disabled())
return -ENODEV;
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
return platform_driver_register(&ohci_platform_driver);
}
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index d879d6af5710..95240c9c45bd 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3190,7 +3190,6 @@ static int __init u132_hcd_init(void)
u132_exiting = 0;
if (usb_disabled())
return -ENODEV;
- printk(KERN_INFO "driver %s\n", hcd_name);
workqueue = create_singlethread_workqueue("u132");
if (!workqueue)
return -ENOMEM;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d90b869f5f40..c22b51af83fc 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -867,8 +867,6 @@ static int __init uhci_hcd_init(void)
if (usb_disabled())
return -ENODEV;
- printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n",
- ignore_oc ? ", overcurrent ignored" : "");
set_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
#ifdef CONFIG_DYNAMIC_DEBUG
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 9b88745d247f..3592f757fe05 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -294,7 +294,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
static int uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- return usb_hcd_pci_probe(dev, id, &uhci_driver);
+ return usb_hcd_pci_probe(dev, &uhci_driver);
}
static struct pci_driver uhci_pci_driver = {
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index e61155fa6379..f1367b53b260 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -988,7 +988,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver *
dbc->driver = driver;
if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
- return NULL;
+ goto err;
INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events);
spin_lock_init(&dbc->lock);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8c19e151a945..9e56aa28efcd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -641,7 +641,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
num_stream_ctxs, &stream_info->ctx_array_dma,
mem_flags);
if (!stream_info->stream_ctx_array)
- goto cleanup_ctx;
+ goto cleanup_ring_array;
memset(stream_info->stream_ctx_array, 0,
sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
@@ -702,6 +702,11 @@ cleanup_rings:
}
xhci_free_command(xhci, stream_info->free_streams_command);
cleanup_ctx:
+ xhci_free_stream_ctx(xhci,
+ stream_info->num_stream_ctxs,
+ stream_info->stream_ctx_array,
+ stream_info->ctx_array_dma);
+cleanup_ring_array:
kfree(stream_info->stream_rings);
cleanup_info:
kfree(stream_info);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index dce6c0ec8d34..40228a3d77a0 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -431,7 +431,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
* to say USB 2.0, but I'm not sure what the implications would be in
* the other parts of the HCD code.
*/
- retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver);
+ retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver);
if (retval)
goto put_runtime_pm;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index a8641b6536ee..5fb55bf19493 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -123,7 +123,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
};
static const struct xhci_plat_priv xhci_plat_brcm = {
- .quirks = XHCI_RESET_ON_RESUME,
+ .quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
};
static const struct of_device_id usb_xhci_of_match[] = {
@@ -437,7 +437,16 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend.
*/
- return xhci_suspend(xhci, device_may_wakeup(dev));
+ ret = xhci_suspend(xhci, device_may_wakeup(dev));
+ if (ret)
+ return ret;
+
+ if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+ clk_disable_unprepare(xhci->clk);
+ clk_disable_unprepare(xhci->reg_clk);
+ }
+
+ return 0;
}
static int __maybe_unused xhci_plat_resume(struct device *dev)
@@ -446,6 +455,11 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
+ if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+ clk_prepare_enable(xhci->clk);
+ clk_prepare_enable(xhci->reg_clk);
+ }
+
ret = xhci_priv_resume_quirk(hcd);
if (ret)
return ret;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 38649284ff88..5176765c4013 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1183,7 +1183,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* re-initialize the HC on Restore Error, or Host Controller Error */
if (temp & (STS_SRE | STS_HCE)) {
reinit_xhc = true;
- xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+ if (!xhci->broken_suspend)
+ xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
}
if (reinit_xhc) {
@@ -1482,7 +1483,7 @@ EXPORT_SYMBOL_GPL(xhci_get_endpoint_index);
/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
* address from the XHCI endpoint index.
*/
-unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+static unsigned int xhci_get_endpoint_address(unsigned int ep_index)
{
unsigned int number = DIV_ROUND_UP(ep_index, 2);
unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
@@ -4095,7 +4096,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
slot_id = command->slot_id;
if (!slot_id || command->status != COMP_SUCCESS) {
- xhci_err(xhci, "Error while assigning device slot ID\n");
+ xhci_err(xhci, "Error while assigning device slot ID: %s\n",
+ xhci_trb_comp_code_string(command->status));
xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
HCS_MAX_SLOTS(
readl(&xhci->cap_regs->hcs_params1)));
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7caa0db5e826..c0964fe8ac12 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1807,8 +1807,6 @@ struct xhci_hcd {
struct xhci_erst erst;
/* Scratchpad */
struct xhci_scratchpad *scratchpad;
- /* Store LPM test failed devices' information */
- struct list_head lpm_failed_devs;
/* slot enabling and address device helpers */
/* these are not thread safe so use mutex */
@@ -1827,7 +1825,6 @@ struct xhci_hcd {
/* Host controller watchdog timer structures */
unsigned int xhc_state;
unsigned long run_graceperiod;
- u32 command;
struct s3_save s3;
/* Host controller is dying - not responding to commands. "I'm not dead yet!"
*
@@ -1899,6 +1896,7 @@ struct xhci_hcd {
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
#define XHCI_BROKEN_D3COLD BIT_ULL(41)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
+#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
unsigned int num_active_eps;
unsigned int limit_active_eps;
@@ -2041,7 +2039,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
-unsigned int xhci_get_endpoint_address(unsigned int ep_index);
unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index e9437a176518..ea39243efee3 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -177,10 +177,6 @@ static int idmouse_create_image(struct usb_idmouse *dev)
bytes_read += bulk_read;
}
- /* reset the device */
-reset:
- ftip_command(dev, FTIP_RELEASE, 0, 0);
-
/* check for valid image */
/* right border should be black (0x00) */
for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH)
@@ -192,6 +188,10 @@ reset:
if (dev->bulk_in_buffer[bytes_read] != 0xFF)
return -EAGAIN;
+ /* reset the device */
+reset:
+ ftip_command(dev, FTIP_RELEASE, 0, 0);
+
/* should be IMGSIZE == 65040 */
dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
bytes_read);
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 04c4e3fed094..54337d72bb9f 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -400,7 +400,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
{
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
- int len, err;
+ int len;
u32 property_u32 = 0;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
@@ -416,13 +416,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->skip_config = 0;
hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) {
- return -EPROBE_DEFER;
- } else if (IS_ERR(hub->gpio_reset)) {
- err = PTR_ERR(hub->gpio_reset);
- dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
- return err;
- }
+ if (IS_ERR(hub->gpio_reset))
+ return dev_err_probe(dev, PTR_ERR(hub->gpio_reset),
+ "unable to request GPIO reset pin\n");
if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
hub->vendor_id = USB251XB_DEF_VENDOR_ID;
@@ -547,7 +543,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->boost_up = USB251XB_DEF_BOOST_UP;
cproperty_char = of_get_property(np, "manufacturer", NULL);
- strlcpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING,
+ strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING,
sizeof(str));
hub->manufacturer_len = strlen(str) & 0xFF;
memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE);
@@ -557,7 +553,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
USB251XB_STRING_BUFSIZE);
cproperty_char = of_get_property(np, "product", NULL);
- strlcpy(str, cproperty_char ? : data->product_str, sizeof(str));
+ strscpy(str, cproperty_char ? : data->product_str, sizeof(str));
hub->product_len = strlen(str) & 0xFF;
memset(hub->product, 0, USB251XB_STRING_BUFSIZE);
len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str));
@@ -566,7 +562,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
USB251XB_STRING_BUFSIZE);
cproperty_char = of_get_property(np, "serial", NULL);
- strlcpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING,
+ strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING,
sizeof(str));
hub->serial_len = strlen(str) & 0xFF;
memset(hub->serial, 0, USB251XB_STRING_BUFSIZE);
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 3c9fa663475f..c70ca475c7c7 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -160,6 +160,7 @@ static int usb3503_probe(struct usb3503 *hub)
struct usb3503_platform_data *pdata = dev_get_platdata(dev);
struct device_node *np = dev->of_node;
int err;
+ bool is_clk_enabled = false;
u32 mode = USB3503_MODE_HUB;
const u32 *property;
enum gpiod_flags flags;
@@ -217,6 +218,7 @@ static int usb3503_probe(struct usb3503 *hub)
return err;
}
+ is_clk_enabled = true;
property = of_get_property(np, "disabled-ports", &len);
if (property && (len / sizeof(u32)) > 0) {
int i;
@@ -236,20 +238,26 @@ static int usb3503_probe(struct usb3503 *hub)
else
flags = GPIOD_OUT_HIGH;
hub->intn = devm_gpiod_get_optional(dev, "intn", flags);
- if (IS_ERR(hub->intn))
- return PTR_ERR(hub->intn);
+ if (IS_ERR(hub->intn)) {
+ err = PTR_ERR(hub->intn);
+ goto err_clk;
+ }
if (hub->intn)
gpiod_set_consumer_name(hub->intn, "usb3503 intn");
hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW);
- if (IS_ERR(hub->connect))
- return PTR_ERR(hub->connect);
+ if (IS_ERR(hub->connect)) {
+ err = PTR_ERR(hub->connect);
+ goto err_clk;
+ }
if (hub->connect)
gpiod_set_consumer_name(hub->connect, "usb3503 connect");
hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(hub->reset))
- return PTR_ERR(hub->reset);
+ if (IS_ERR(hub->reset)) {
+ err = PTR_ERR(hub->reset);
+ goto err_clk;
+ }
if (hub->reset) {
/* Datasheet defines a hardware reset to be at least 100us */
usleep_range(100, 10000);
@@ -265,6 +273,11 @@ static int usb3503_probe(struct usb3503 *hub)
(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
return 0;
+
+err_clk:
+ if (is_clk_enabled)
+ clk_disable_unprepare(hub->clk);
+ return err;
}
static int usb3503_i2c_probe(struct i2c_client *i2c,
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 0be8efcda15d..b00d92db5dfd 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -502,7 +502,7 @@ static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf,
#else
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
- int rlen;
+ int rlen = 0;
int i;
if (!usbdev)
@@ -563,7 +563,7 @@ static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buff
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
- int rlen;
+ int rlen = 0;
int i;
if (!usbdev)
@@ -581,7 +581,7 @@ static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, siz
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
- int rlen;
+ int rlen = 0;
int i;
if (!usbdev)
@@ -614,7 +614,7 @@ static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer
{
struct parport_uss720_private *priv = pp->private_data;
struct usb_device *usbdev = priv->usbdev;
- int rlen;
+ int rlen = 0;
int i;
if (!usbdev)
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index f48a23adbc35..094e812e9e69 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma)
{
/* don't do anything here: "fault" will set up page table entries */
vma->vm_ops = &mon_bin_vm_ops;
+
+ if (vma->vm_flags & VM_WRITE)
+ return -EPERM;
+
+ vma->vm_flags &= ~VM_MAYWRITE;
vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
vma->vm_private_data = filp->private_data;
mon_bin_vma_open(vma);
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 0ca173af87bb..a3a6282893d0 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -978,8 +978,6 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
goto irq_err;
}
- device_init_wakeup(dev, true);
-
/* power down device IP for power saving by default */
mtu3_stop(mtu);
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 4cb65346789d..d78ae52b4e26 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -356,6 +356,8 @@ static int mtu3_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
+ device_init_wakeup(dev, true);
+
ret = ssusb_rscs_init(ssusb);
if (ret)
goto comm_init_err;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index fd4ae2dd24e5..a4e55b0c52cf 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -523,11 +523,9 @@ static int da8xx_probe(struct platform_device *pdev)
}
glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
- if (IS_ERR(glue->phy)) {
- if (PTR_ERR(glue->phy) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to get phy\n");
- return PTR_ERR(glue->phy);
- }
+ if (IS_ERR(glue->phy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+ "failed to get phy\n");
glue->dev = &pdev->dev;
glue->clk = clk;
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 417c30bff9ca..d1e4e0deb753 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -105,7 +105,6 @@ static int jz4740_musb_init(struct musb *musb)
.driver_data = glue,
.fwnode = dev_fwnode(dev),
};
- int err;
glue->musb = musb;
@@ -113,12 +112,9 @@ static int jz4740_musb_init(struct musb *musb)
musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
else
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
- if (IS_ERR(musb->xceiv)) {
- err = PTR_ERR(musb->xceiv);
- if (err != -EPROBE_DEFER)
- dev_err(dev, "No transceiver configured: %d\n", err);
- return err;
- }
+ if (IS_ERR(musb->xceiv))
+ return dev_err_probe(dev, PTR_ERR(musb->xceiv),
+ "No transceiver configured\n");
glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
if (IS_ERR(glue->role_sw)) {
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bbbcfd49fb35..03027c6fa3ab 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2595,9 +2595,7 @@ fail2:
musb_platform_exit(musb);
fail1:
- if (status != -EPROBE_DEFER)
- dev_err(musb->controller,
- "%s failed with status %d\n", __func__, status);
+ dev_err_probe(musb->controller, status, "%s failed\n", __func__);
musb_free(musb);
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index c963cb8565f2..9589243e8951 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -718,10 +718,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
dc = dma_request_chan(dev->parent, str);
if (IS_ERR(dc)) {
- ret = PTR_ERR(dc);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request %s: %d.\n",
- str, ret);
+ ret = dev_err_probe(dev, PTR_ERR(dc),
+ "Failed to request %s.\n", str);
goto err;
}
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index daada4b66a92..6704a62a1665 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -760,6 +760,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)
musb_writew(epio, MUSB_RXCSR, csr);
buffer_aint_mapped:
+ fifo_count = min_t(unsigned int,
+ request->length - request->actual,
+ (unsigned int)fifo_count);
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
request->actual += fifo_count;
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 961c858fb349..7f9a999cd5ff 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -743,31 +743,20 @@ static int sunxi_musb_probe(struct platform_device *pdev)
if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
glue->rst = devm_reset_control_get(&pdev->dev, NULL);
- if (IS_ERR(glue->rst)) {
- if (PTR_ERR(glue->rst) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_err(&pdev->dev, "Error getting reset %ld\n",
- PTR_ERR(glue->rst));
- return PTR_ERR(glue->rst);
- }
+ if (IS_ERR(glue->rst))
+ return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst),
+ "Error getting reset\n");
}
glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
- if (IS_ERR(glue->extcon)) {
- if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_err(&pdev->dev, "Invalid or missing extcon\n");
- return PTR_ERR(glue->extcon);
- }
+ if (IS_ERR(glue->extcon))
+ return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon),
+ "Invalid or missing extcon\n");
glue->phy = devm_phy_get(&pdev->dev, "usb");
- if (IS_ERR(glue->phy)) {
- if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_err(&pdev->dev, "Error getting phy %ld\n",
- PTR_ERR(glue->phy));
- return PTR_ERR(glue->phy);
- }
+ if (IS_ERR(glue->phy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+ "Error getting phy\n");
glue->usb_phy = usb_phy_generic_register();
if (IS_ERR(glue->usb_phy)) {
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 34b9f8140187..3dc5c04e7cbf 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -230,12 +230,9 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
}
- if (err == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- if (err) {
- dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err,
+ "Error requesting RESET or VBUS GPIO\n");
if (nop->gpiod_reset)
gpiod_direction_output(nop->gpiod_reset, 1);
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index 4025da20b3fd..f16adcacdce3 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -321,27 +321,18 @@ static int jz4770_phy_probe(struct platform_device *pdev)
}
priv->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->clk)) {
- err = PTR_ERR(priv->clk);
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get clock\n");
- return err;
- }
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk),
+ "Failed to get clock\n");
priv->vcc_supply = devm_regulator_get(dev, "vcc");
- if (IS_ERR(priv->vcc_supply)) {
- err = PTR_ERR(priv->vcc_supply);
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get regulator\n");
- return err;
- }
+ if (IS_ERR(priv->vcc_supply))
+ return dev_err_probe(dev, PTR_ERR(priv->vcc_supply),
+ "Failed to get regulator\n");
err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
- if (err) {
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Unable to register PHY\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err, "Unable to register PHY\n");
return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
}
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 8a262c5a0408..d2836ef5d15c 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -144,8 +144,8 @@
#define MXS_PHY_NEED_IP_FIX BIT(3)
/* Minimum and maximum values for device tree entries */
-#define MXS_PHY_TX_CAL45_MIN 30
-#define MXS_PHY_TX_CAL45_MAX 55
+#define MXS_PHY_TX_CAL45_MIN 35
+#define MXS_PHY_TX_CAL45_MAX 54
#define MXS_PHY_TX_D_CAL_MIN 79
#define MXS_PHY_TX_D_CAL_MAX 119
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 68cd4b68e3a2..f0240107edb1 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1440,16 +1440,22 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
return err;
}
- gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np,
- "nvidia,phy-reset-gpio",
- 0, GPIOD_OUT_HIGH,
- "ulpi_phy_reset_b");
+ gpiod = devm_gpiod_get(&pdev->dev, "nvidia,phy-reset",
+ GPIOD_OUT_HIGH);
err = PTR_ERR_OR_ZERO(gpiod);
if (err) {
dev_err(&pdev->dev,
"Request failed for reset GPIO: %d\n", err);
return err;
}
+
+ err = gpiod_set_consumer_name(gpiod, "ulpi_phy_reset_b");
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to set up reset GPIO name: %d\n", err);
+ return err;
+ }
+
tegra_phy->reset_gpio = gpiod;
phy = devm_otg_ulpi_create(&pdev->dev,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b97aa40ca4d1..da19a5fa414f 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -189,8 +189,8 @@ static int usb_console_setup(struct console *co, char *options)
info->port = NULL;
usb_autopm_put_interface(serial->interface);
error_get_interface:
- usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
+ usb_serial_put(serial);
return retval;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0a1da579ead5..05e28a5ce42b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -47,10 +47,27 @@
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
+enum ftdi_chip_type {
+ SIO,
+ FT232A,
+ FT232B,
+ FT2232C,
+ FT232R,
+ FT232H,
+ FT2232H,
+ FT4232H,
+ FT4232HA,
+ FT232HP,
+ FT233HP,
+ FT2232HP,
+ FT2233HP,
+ FT4232HP,
+ FT4233HP,
+ FTX,
+};
struct ftdi_private {
enum ftdi_chip_type chip_type;
- /* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
int custom_divisor; /* custom_divisor kludge, this is for
baud_base (different from what goes to the
@@ -62,8 +79,7 @@ struct ftdi_private {
unsigned long last_dtr_rts; /* saved modem control outputs */
char prev_status; /* Used for TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
- u16 interface; /* FT2232C, FT2232H or FT4232H port interface
- (0 for FT232/245) */
+ u16 channel; /* channel index, or 0 for legacy types */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
@@ -84,8 +100,7 @@ struct ftdi_private {
#endif
};
-/* struct ftdi_sio_quirk is used by devices requiring special attention. */
-struct ftdi_sio_quirk {
+struct ftdi_quirk {
int (*probe)(struct usb_serial *);
/* Special settings for probed ports. */
void (*port_probe)(struct ftdi_private *);
@@ -98,27 +113,27 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
-static const struct ftdi_sio_quirk ftdi_jtag_quirk = {
+static const struct ftdi_quirk ftdi_jtag_quirk = {
.probe = ftdi_jtag_probe,
};
-static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+static const struct ftdi_quirk ftdi_NDI_device_quirk = {
.probe = ftdi_NDI_device_setup,
};
-static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
+static const struct ftdi_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
-static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+static const struct ftdi_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
};
-static const struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+static const struct ftdi_quirk ftdi_stmclite_quirk = {
.probe = ftdi_stmclite_probe,
};
-static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
+static const struct ftdi_quirk ftdi_8u2232c_quirk = {
.probe = ftdi_8u2232c_probe,
};
@@ -180,6 +195,13 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT2233HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT4233HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT2232HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT4232HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT233HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT232HP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FT4232HA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -1061,15 +1083,22 @@ static const struct usb_device_id id_table_combined[] = {
MODULE_DEVICE_TABLE(usb, id_table_combined);
static const char *ftdi_chip_name[] = {
- [SIO] = "SIO", /* the serial part of FT8U100AX */
- [FT8U232AM] = "FT8U232AM",
- [FT232BM] = "FT232BM",
- [FT2232C] = "FT2232C",
- [FT232RL] = "FT232RL",
- [FT2232H] = "FT2232H",
- [FT4232H] = "FT4232H",
- [FT232H] = "FT232H",
- [FTX] = "FT-X"
+ [SIO] = "SIO", /* the serial part of FT8U100AX */
+ [FT232A] = "FT232A",
+ [FT232B] = "FT232B",
+ [FT2232C] = "FT2232C/D",
+ [FT232R] = "FT232R",
+ [FT232H] = "FT232H",
+ [FT2232H] = "FT2232H",
+ [FT4232H] = "FT4232H",
+ [FT4232HA] = "FT4232HA",
+ [FT232HP] = "FT232HP",
+ [FT233HP] = "FT233HP",
+ [FT2232HP] = "FT2232HP",
+ [FT2233HP] = "FT2233HP",
+ [FT4232HP] = "FT4232HP",
+ [FT4233HP] = "FT4233HP",
+ [FTX] = "FT-X",
};
@@ -1078,75 +1107,12 @@ static const char *ftdi_chip_name[] = {
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* End TIOCMIWAIT */
-/* function prototypes for a FTDI serial converter */
-static int ftdi_sio_probe(struct usb_serial *serial,
- const struct usb_device_id *id);
-static int ftdi_sio_port_probe(struct usb_serial_port *port);
-static void ftdi_sio_port_remove(struct usb_serial_port *port);
-static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
-static void ftdi_process_read_urb(struct urb *urb);
-static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
- void *dest, size_t size);
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios);
-static int ftdi_tiocmget(struct tty_struct *tty);
-static int ftdi_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear);
-static int ftdi_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg);
-static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
-static int set_serial_info(struct tty_struct *tty,
- struct serial_struct *ss);
-static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static bool ftdi_tx_empty(struct usb_serial_port *port);
static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
-static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
-static unsigned short int ftdi_232am_baud_to_divisor(int baud);
-static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
-static u32 ftdi_232bm_baud_to_divisor(int baud);
-static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
-static u32 ftdi_2232h_baud_to_divisor(int baud);
-
-static struct usb_serial_driver ftdi_sio_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "ftdi_sio",
- },
- .description = "FTDI USB Serial Device",
- .id_table = id_table_combined,
- .num_ports = 1,
- .bulk_in_size = 512,
- .bulk_out_size = 256,
- .probe = ftdi_sio_probe,
- .port_probe = ftdi_sio_port_probe,
- .port_remove = ftdi_sio_port_remove,
- .open = ftdi_open,
- .dtr_rts = ftdi_dtr_rts,
- .throttle = usb_serial_generic_throttle,
- .unthrottle = usb_serial_generic_unthrottle,
- .process_read_urb = ftdi_process_read_urb,
- .prepare_write_buffer = ftdi_prepare_write_buffer,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
- .get_icount = usb_serial_generic_get_icount,
- .ioctl = ftdi_ioctl,
- .get_serial = get_serial_info,
- .set_serial = set_serial_info,
- .set_termios = ftdi_set_termios,
- .break_ctl = ftdi_break_ctl,
- .tx_empty = ftdi_tx_empty,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &ftdi_sio_device, NULL
-};
-
-
#define WDR_TIMEOUT 5000 /* default urb timeout */
#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
@@ -1262,7 +1228,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- value, priv->interface,
+ value, priv->channel,
NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n",
@@ -1308,7 +1274,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
if (!baud)
baud = 9600;
switch (priv->chip_type) {
- case SIO: /* SIO chip */
+ case SIO:
switch (baud) {
case 300: div_value = ftdi_sio_b300; break;
case 600: div_value = ftdi_sio_b600; break;
@@ -1320,8 +1286,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
- } /* baud */
- if (div_value == 0) {
+ default:
dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
__func__, baud);
div_value = ftdi_sio_b9600;
@@ -1329,7 +1294,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
div_okay = 0;
}
break;
- case FT8U232AM: /* 8U232AM chip */
+ case FT232A:
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
@@ -1339,10 +1304,10 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
div_okay = 0;
}
break;
- case FT232BM: /* FT232BM chip */
- case FT2232C: /* FT2232C chip */
- case FT232RL: /* FT232RL chip */
- case FTX: /* FT-X series */
+ case FT232B:
+ case FT2232C:
+ case FT232R:
+ case FTX:
if (baud <= 3000000) {
u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
@@ -1362,9 +1327,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
baud = 9600;
}
break;
- case FT2232H: /* FT2232H chip */
- case FT4232H: /* FT4232H chip */
- case FT232H: /* FT232H chip */
+ default:
if ((baud <= 12000000) && (baud >= 1200)) {
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
@@ -1376,7 +1339,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty,
baud = 9600;
}
break;
- } /* priv->chip_type */
+ }
if (div_okay) {
dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n",
@@ -1399,13 +1362,8 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
index_value = get_ftdi_divisor(tty, port);
value = (u16)index_value;
index = (u16)(index_value >> 16);
- if (priv->chip_type == FT2232C || priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H || priv->chip_type == FT232H ||
- priv->chip_type == FTX) {
- /* Probably the BM type needs the MSB of the encoded fractional
- * divider also moved like for the chips above. Any infos? */
- index = (u16)((index << 8) | priv->interface);
- }
+ if (priv->channel)
+ index = (u16)((index << 8) | priv->channel);
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
@@ -1423,7 +1381,7 @@ static int write_latency_timer(struct usb_serial_port *port)
int rv;
int l = priv->latency;
- if (priv->chip_type == SIO || priv->chip_type == FT8U232AM)
+ if (priv->chip_type == SIO || priv->chip_type == FT232A)
return -EINVAL;
if (priv->flags & ASYNC_LOW_LATENCY)
@@ -1435,7 +1393,7 @@ static int write_latency_timer(struct usb_serial_port *port)
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- l, priv->interface,
+ l, priv->channel,
NULL, 0, WDR_TIMEOUT);
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
@@ -1451,7 +1409,7 @@ static int _read_latency_timer(struct usb_serial_port *port)
rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0,
- priv->interface, &buf, 1, WDR_TIMEOUT,
+ priv->channel, &buf, 1, WDR_TIMEOUT,
GFP_KERNEL);
if (rv == 0)
rv = buf;
@@ -1464,7 +1422,7 @@ static int read_latency_timer(struct usb_serial_port *port)
struct ftdi_private *priv = usb_get_serial_port_data(port);
int rv;
- if (priv->chip_type == SIO || priv->chip_type == FT8U232AM)
+ if (priv->chip_type == SIO || priv->chip_type == FT232A)
return -EINVAL;
rv = _read_latency_timer(port);
@@ -1539,90 +1497,97 @@ static int get_lsr_info(struct usb_serial_port *port,
return 0;
}
-
-/* Determine type of FTDI chip based on USB config and descriptor. */
-static void ftdi_determine_type(struct usb_serial_port *port)
+static int ftdi_determine_type(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
- unsigned version;
- unsigned interfaces;
-
- /* Assume it is not the original SIO device for now. */
- priv->baud_base = 48000000 / 2;
+ unsigned int version, ifnum;
version = le16_to_cpu(udev->descriptor.bcdDevice);
- interfaces = udev->actconfig->desc.bNumInterfaces;
- dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__,
- version, interfaces);
- if (interfaces > 1) {
- struct usb_interface *intf = serial->interface;
- int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
- /* Multiple interfaces.*/
- if (version == 0x0800) {
- priv->chip_type = FT4232H;
- /* Hi-speed - baud clock runs at 120MHz */
- priv->baud_base = 120000000 / 2;
- } else if (version == 0x0700) {
- priv->chip_type = FT2232H;
- /* Hi-speed - baud clock runs at 120MHz */
- priv->baud_base = 120000000 / 2;
- } else
- priv->chip_type = FT2232C;
-
- /* Determine interface code. */
- if (ifnum == 0)
- priv->interface = INTERFACE_A;
- else if (ifnum == 1)
- priv->interface = INTERFACE_B;
- else if (ifnum == 2)
- priv->interface = INTERFACE_C;
- else if (ifnum == 3)
- priv->interface = INTERFACE_D;
-
- /* BM-type devices have a bug where bcdDevice gets set
- * to 0x200 when iSerialNumber is 0. */
- if (version < 0x500) {
- dev_dbg(&port->dev,
- "%s: something fishy - bcdDevice too low for multi-interface device\n",
- __func__);
- }
- } else if (version < 0x200) {
- /* Old device. Assume it's the original SIO. */
- priv->chip_type = SIO;
- priv->baud_base = 12000000 / 16;
- } else if (version < 0x400) {
- /* Assume it's an FT8U232AM (or FT8U245AM) */
- priv->chip_type = FT8U232AM;
+ ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+ /* Assume Hi-Speed type */
+ priv->baud_base = 120000000 / 2;
+ priv->channel = CHANNEL_A + ifnum;
+
+ switch (version) {
+ case 0x200:
+ priv->chip_type = FT232A;
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
/*
- * It might be a BM type because of the iSerialNumber bug.
- * If iSerialNumber==0 and the latency timer is readable,
- * assume it is BM type.
+ * FT232B devices have a bug where bcdDevice gets set to 0x200
+ * when iSerialNumber is 0. Assume it is an FT232B in case the
+ * latency timer is readable.
*/
if (udev->descriptor.iSerialNumber == 0 &&
_read_latency_timer(port) >= 0) {
- dev_dbg(&port->dev,
- "%s: has latency timer so not an AM type\n",
- __func__);
- priv->chip_type = FT232BM;
+ priv->chip_type = FT232B;
}
- } else if (version < 0x600) {
- /* Assume it's an FT232BM (or FT245BM) */
- priv->chip_type = FT232BM;
- } else if (version < 0x900) {
- /* Assume it's an FT232RL */
- priv->chip_type = FT232RL;
- } else if (version < 0x1000) {
- /* Assume it's an FT232H */
+ break;
+ case 0x400:
+ priv->chip_type = FT232B;
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
+ break;
+ case 0x500:
+ priv->chip_type = FT2232C;
+ priv->baud_base = 48000000 / 2;
+ break;
+ case 0x600:
+ priv->chip_type = FT232R;
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
+ break;
+ case 0x700:
+ priv->chip_type = FT2232H;
+ break;
+ case 0x800:
+ priv->chip_type = FT4232H;
+ break;
+ case 0x900:
priv->chip_type = FT232H;
- } else {
- /* Assume it's an FT-X series device */
+ break;
+ case 0x1000:
priv->chip_type = FTX;
+ priv->baud_base = 48000000 / 2;
+ break;
+ case 0x2800:
+ priv->chip_type = FT2233HP;
+ break;
+ case 0x2900:
+ priv->chip_type = FT4233HP;
+ break;
+ case 0x3000:
+ priv->chip_type = FT2232HP;
+ break;
+ case 0x3100:
+ priv->chip_type = FT4232HP;
+ break;
+ case 0x3200:
+ priv->chip_type = FT233HP;
+ break;
+ case 0x3300:
+ priv->chip_type = FT232HP;
+ break;
+ case 0x3600:
+ priv->chip_type = FT4232HA;
+ break;
+ default:
+ if (version < 0x200) {
+ priv->chip_type = SIO;
+ priv->baud_base = 12000000 / 16;
+ priv->channel = 0;
+ } else {
+ dev_err(&port->dev, "unknown device type: 0x%02x\n", version);
+ return -ENODEV;
+ }
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
+
+ return 0;
}
@@ -1721,7 +1686,7 @@ static ssize_t event_char_store(struct device *dev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
- v, priv->interface,
+ v, priv->channel,
NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dev_dbg(&port->dev, "Unable to write event character: %i\n", rv);
@@ -1732,51 +1697,42 @@ static ssize_t event_char_store(struct device *dev,
}
static DEVICE_ATTR_WO(event_char);
-static int create_sysfs_attrs(struct usb_serial_port *port)
-{
- struct ftdi_private *priv = usb_get_serial_port_data(port);
- int retval = 0;
-
- /* XXX I've no idea if the original SIO supports the event_char
- * sysfs parameter, so I'm playing it safe. */
- if (priv->chip_type != SIO) {
- dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]);
- retval = device_create_file(&port->dev, &dev_attr_event_char);
- if ((!retval) &&
- (priv->chip_type == FT232BM ||
- priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL ||
- priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H ||
- priv->chip_type == FT232H ||
- priv->chip_type == FTX)) {
- retval = device_create_file(&port->dev,
- &dev_attr_latency_timer);
- }
- }
- return retval;
-}
+static struct attribute *ftdi_attrs[] = {
+ &dev_attr_event_char.attr,
+ &dev_attr_latency_timer.attr,
+ NULL
+};
-static void remove_sysfs_attrs(struct usb_serial_port *port)
+static umode_t ftdi_is_visible(struct kobject *kobj, struct attribute *attr, int idx)
{
+ struct device *dev = kobj_to_dev(kobj);
+ struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
+ enum ftdi_chip_type type = priv->chip_type;
- /* XXX see create_sysfs_attrs */
- if (priv->chip_type != SIO) {
- device_remove_file(&port->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM ||
- priv->chip_type == FT2232C ||
- priv->chip_type == FT232RL ||
- priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H ||
- priv->chip_type == FT232H ||
- priv->chip_type == FTX) {
- device_remove_file(&port->dev, &dev_attr_latency_timer);
- }
+ if (attr == &dev_attr_event_char.attr) {
+ if (type == SIO)
+ return 0;
+ }
+
+ if (attr == &dev_attr_latency_timer.attr) {
+ if (type == SIO || type == FT232A)
+ return 0;
}
+ return attr->mode;
}
+static const struct attribute_group ftdi_group = {
+ .attrs = ftdi_attrs,
+ .is_visible = ftdi_is_visible,
+};
+
+static const struct attribute_group *ftdi_groups[] = {
+ &ftdi_group,
+ NULL
+};
+
#ifdef CONFIG_GPIOLIB
static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
@@ -1795,7 +1751,7 @@ static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
usb_sndctrlpipe(serial->dev, 0),
FTDI_SIO_SET_BITMODE_REQUEST,
FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
- priv->interface, NULL, 0, WDR_TIMEOUT);
+ priv->channel, NULL, 0, WDR_TIMEOUT);
if (result < 0) {
dev_err(&serial->interface->dev,
"bitmode request failed for value 0x%04x: %d\n",
@@ -1859,7 +1815,7 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port)
result = usb_control_msg_recv(serial->dev, 0,
FTDI_SIO_READ_PINS_REQUEST,
FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
- priv->interface, &buf, 1, WDR_TIMEOUT,
+ priv->channel, &buf, 1, WDR_TIMEOUT,
GFP_KERNEL);
if (result == 0)
result = buf;
@@ -2144,7 +2100,7 @@ static int ftdi_gpio_init(struct usb_serial_port *port)
case FT232H:
result = ftdi_gpio_init_ft232h(port);
break;
- case FT232RL:
+ case FT232R:
result = ftdi_gpio_init_ft232r(port);
break;
case FTX:
@@ -2214,12 +2170,9 @@ static void ftdi_gpio_remove(struct usb_serial_port *port) { }
* ***************************************************************************
*/
-/* Probe function to check for special devices */
-static int ftdi_sio_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
+static int ftdi_probe(struct usb_serial *serial, const struct usb_device_id *id)
{
- const struct ftdi_sio_quirk *quirk =
- (struct ftdi_sio_quirk *)id->driver_info;
+ const struct ftdi_quirk *quirk = (struct ftdi_quirk *)id->driver_info;
if (quirk && quirk->probe) {
int ret = quirk->probe(serial);
@@ -2232,10 +2185,10 @@ static int ftdi_sio_probe(struct usb_serial *serial,
return 0;
}
-static int ftdi_sio_port_probe(struct usb_serial_port *port)
+static int ftdi_port_probe(struct usb_serial_port *port)
{
+ const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial);
struct ftdi_private *priv;
- const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
int result;
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
@@ -2249,12 +2202,14 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
- ftdi_determine_type(port);
+ result = ftdi_determine_type(port);
+ if (result)
+ goto err_free;
+
ftdi_set_max_packet_size(port);
if (read_latency_timer(port) < 0)
priv->latency = 16;
write_latency_timer(port);
- create_sysfs_attrs(port);
result = ftdi_gpio_init(port);
if (result < 0) {
@@ -2264,6 +2219,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
}
return 0;
+
+err_free:
+ kfree(priv);
+
+ return result;
}
/* Setup for the USB-UIRT device, which requires hardwired
@@ -2374,14 +2334,12 @@ static int ftdi_stmclite_probe(struct usb_serial *serial)
return 0;
}
-static void ftdi_sio_port_remove(struct usb_serial_port *port)
+static void ftdi_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
ftdi_gpio_remove(port);
- remove_sysfs_attrs(port);
-
kfree(priv);
}
@@ -2395,7 +2353,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
- priv->interface, NULL, 0, WDR_TIMEOUT);
+ priv->channel, NULL, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would lose speed settings, etc.
@@ -2418,7 +2376,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, NULL, 0,
+ 0, priv->channel, NULL, 0,
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
@@ -2611,7 +2569,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
- value , priv->interface,
+ value, priv->channel,
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n",
__func__, break_state);
@@ -2748,7 +2706,7 @@ no_skip:
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
- value , priv->interface,
+ value, priv->channel,
NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n",
__func__);
@@ -2761,7 +2719,7 @@ no_data_parity_stop_changes:
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface,
+ 0, priv->channel,
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(ddev, "%s error from disable flowcontrol urb\n",
__func__);
@@ -2795,7 +2753,7 @@ no_c_cflag_changes:
index = FTDI_SIO_DISABLE_FLOW_CTRL;
}
- index |= priv->interface;
+ index |= priv->channel;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
@@ -2823,33 +2781,19 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
if (!buf)
return -ENOMEM;
/*
- * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
- * the same format as the data returned from the in point.
+ * The device returns a two byte value (the SIO a 1 byte value) in the
+ * same format as the data returned from the IN endpoint.
*/
- switch (priv->chip_type) {
- case SIO:
+ if (priv->chip_type == SIO)
len = 1;
- break;
- case FT8U232AM:
- case FT232BM:
- case FT2232C:
- case FT232RL:
- case FT2232H:
- case FT4232H:
- case FT232H:
- case FTX:
+ else
len = 2;
- break;
- default:
- ret = -EFAULT;
- goto out;
- }
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
- 0, priv->interface,
+ 0, priv->channel,
buf, len, WDR_TIMEOUT);
/* NOTE: We allow short responses and handle that below. */
@@ -2919,6 +2863,41 @@ static int ftdi_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+static struct usb_serial_driver ftdi_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ftdi_sio",
+ .dev_groups = ftdi_groups,
+ },
+ .description = "FTDI USB Serial Device",
+ .id_table = id_table_combined,
+ .num_ports = 1,
+ .bulk_in_size = 512,
+ .bulk_out_size = 256,
+ .probe = ftdi_probe,
+ .port_probe = ftdi_port_probe,
+ .port_remove = ftdi_port_remove,
+ .open = ftdi_open,
+ .dtr_rts = ftdi_dtr_rts,
+ .throttle = usb_serial_generic_throttle,
+ .unthrottle = usb_serial_generic_unthrottle,
+ .process_read_urb = ftdi_process_read_urb,
+ .prepare_write_buffer = ftdi_prepare_write_buffer,
+ .tiocmget = ftdi_tiocmget,
+ .tiocmset = ftdi_tiocmset,
+ .tiocmiwait = usb_serial_generic_tiocmiwait,
+ .get_icount = usb_serial_generic_get_icount,
+ .ioctl = ftdi_ioctl,
+ .get_serial = get_serial_info,
+ .set_serial = set_serial_info,
+ .set_termios = ftdi_set_termios,
+ .break_ctl = ftdi_break_ctl,
+ .tx_empty = ftdi_tx_empty,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &ftdi_device, NULL
+};
module_usb_serial_driver(serial_drivers, id_table_combined);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index be1641e0408b..55ea61264f91 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,11 +40,11 @@
#define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */
#define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */
-/* Interface indices for FT2232, FT2232H and FT4232H devices */
-#define INTERFACE_A 1
-#define INTERFACE_B 2
-#define INTERFACE_C 3
-#define INTERFACE_D 4
+/* Channel indices for FT2232, FT2232H and FT4232H devices */
+#define CHANNEL_A 1
+#define CHANNEL_B 2
+#define CHANNEL_C 3
+#define CHANNEL_D 4
/*
@@ -153,18 +153,6 @@
* not supported by the FT8U232AM).
*/
-enum ftdi_chip_type {
- SIO = 1,
- FT8U232AM = 2,
- FT232BM = 3,
- FT2232C = 4,
- FT232RL = 5,
- FT2232H = 6,
- FT4232H = 7,
- FT232H = 8,
- FTX = 9,
-};
-
enum ftdi_sio_baudrate {
ftdi_sio_b300 = 0,
ftdi_sio_b600 = 1,
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 31c8ccabbbb7..e2099445db70 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -25,6 +25,13 @@
#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */
#define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
+#define FTDI_FT2233HP_PID 0x6040 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4233HP_PID 0x6041 /* Quad channel hi-speed device with PD */
+#define FTDI_FT2232HP_PID 0x6042 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4232HP_PID 0x6043 /* Quad channel hi-speed device with PD */
+#define FTDI_FT233HP_PID 0x6044 /* Dual channel hi-speed device with PD */
+#define FTDI_FT232HP_PID 0x6045 /* Dual channel hi-speed device with PD */
+#define FTDI_FT4232HA_PID 0x6048 /* Quad channel automotive grade hi-speed device */
#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 586ef5551e76..b1e844bf31f8 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -177,6 +177,7 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
{DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */
{DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */
+ {DEVICE_SWI(0x413c, 0x81c2)}, /* Dell Wireless 5811e */
{DEVICE_SWI(0x413c, 0x81cb)}, /* Dell Wireless 5816e QDL */
{DEVICE_SWI(0x413c, 0x81cc)}, /* Dell Wireless 5816e */
{DEVICE_SWI(0x413c, 0x81cf)}, /* Dell Wireless 5819 */
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 1db2eefeea22..01f3c2779ccf 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -201,7 +201,7 @@ static int onetouch_connect_input(struct us_data *ss)
onetouch->dev = input_dev;
if (udev->manufacturer)
- strlcpy(onetouch->name, udev->manufacturer,
+ strscpy(onetouch->name, udev->manufacturer,
sizeof(onetouch->name));
if (udev->product) {
if (udev->manufacturer)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4993227ab293..20dcbccb290b 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1275,12 +1275,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
-UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
- "Samsung",
- "Flash Drive FIT",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_MAX_SECTORS_64),
-
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
index e205f409589a..b8f3b75fd7eb 100644
--- a/drivers/usb/typec/anx7411.c
+++ b/drivers/usb/typec/anx7411.c
@@ -1105,7 +1105,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
int ret;
struct device_node *node;
- node = of_find_node_by_name(dev->of_node, "orientation_switch");
+ node = of_get_child_by_name(dev->of_node, "orientation_switch");
if (!node)
return 0;
@@ -1115,7 +1115,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
return ret;
}
- node = of_find_node_by_name(dev->of_node, "mode_switch");
+ node = of_get_child_by_name(dev->of_node, "mode_switch");
if (!node) {
dev_err(dev, "no typec mux exist");
ret = -ENODEV;
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index 464330776cd6..941735c73161 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -29,7 +29,7 @@ static int switch_fwnode_match(struct device *dev, const void *fwnode)
if (!is_typec_switch_dev(dev))
return 0;
- return dev_fwnode(dev) == fwnode;
+ return device_match_fwnode(dev, fwnode);
}
static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id,
@@ -259,7 +259,7 @@ static int mux_fwnode_match(struct device *dev, const void *fwnode)
if (!is_typec_mux_dev(dev))
return 0;
- return dev_fwnode(dev) == fwnode;
+ return device_match_fwnode(dev, fwnode);
}
static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id,
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
index a0454a80c4a2..432ea62f1bab 100644
--- a/drivers/usb/typec/qcom-pmic-typec.c
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -195,9 +195,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev));
if (IS_ERR(qcom_usb->role_sw)) {
- if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
- dev_err(dev, "failed to get role switch\n");
- ret = PTR_ERR(qcom_usb->role_sw);
+ ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw),
+ "failed to get role switch\n");
goto err_typec_port;
}
diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c
index 2003731f1bee..ee94dbbe4745 100644
--- a/drivers/usb/typec/retimer.c
+++ b/drivers/usb/typec/retimer.c
@@ -31,7 +31,7 @@ static bool dev_name_ends_with(struct device *dev, const char *suffix)
static int retimer_fwnode_match(struct device *dev, const void *fwnode)
{
- return dev_fwnode(dev) == fwnode && dev_name_ends_with(dev, "-retimer");
+ return device_match_fwnode(dev, fwnode) && dev_name_ends_with(dev, "-retimer");
}
static void *typec_retimer_match(struct fwnode_handle *fwnode, const char *id, void *data)
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index 8638f1d39896..494b371151e0 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c
@@ -750,11 +750,8 @@ static int stusb160x_probe(struct i2c_client *client)
if (client->irq) {
chip->role_sw = fwnode_usb_role_switch_get(fwnode);
if (IS_ERR(chip->role_sw)) {
- ret = PTR_ERR(chip->role_sw);
- if (ret != -EPROBE_DEFER)
- dev_err(chip->dev,
- "Failed to get usb role switch: %d\n",
- ret);
+ ret = dev_err_probe(chip->dev, PTR_ERR(chip->role_sw),
+ "Failed to get usb role switch\n");
goto port_unregister;
}
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 073fd2ea5e0b..e6b88ca4a4b9 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -35,6 +35,17 @@ config TYPEC_MT6360
USB Type-C. It works with Type-C Port Controller Manager
to provide USB PD and USB Type-C functionalities.
+config TYPEC_TCPCI_MT6370
+ tristate "MediaTek MT6370 Type-C driver"
+ depends on MFD_MT6370
+ help
+ MediaTek MT6370 is a multi-functional IC that includes
+ USB Type-C. It works with Type-C Port Controller Manager
+ to provide USB PD and USB Type-C functionalities.
+
+ This driver can also be built as a module. The module
+ will be called "tcpci_mt6370".
+
config TYPEC_TCPCI_MAXIM
tristate "Maxim TCPCI based Type-C chip driver"
help
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
index 7d499f3569fd..906d9dced8e7 100644
--- a/drivers/usb/typec/tcpm/Makefile
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -6,4 +6,5 @@ typec_wcove-y := wcove.o
obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o
+obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o
obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 5e9348f28d50..721b2a548084 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -151,7 +151,7 @@ static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
if (fusb302_log_full(chip)) {
chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
- strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
+ strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
}
if (chip->logbuffer_head < 0 ||
@@ -1743,9 +1743,8 @@ static int fusb302_probe(struct i2c_client *client,
chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
if (IS_ERR(chip->tcpm_port)) {
fwnode_handle_put(chip->tcpc_dev.fwnode);
- ret = PTR_ERR(chip->tcpm_port);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "cannot register tcpm port, ret=%d", ret);
+ ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port),
+ "cannot register tcpm port\n");
goto destroy_workqueue;
}
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index f00810d198a8..b2bfcebe218f 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -27,11 +27,6 @@
#define VPPS_VALID_MIN_MV 100
#define VSINKDISCONNECT_PD_MIN_PERCENT 90
-#define tcpc_presenting_rd(reg, cc) \
- (!(TCPC_ROLE_CTRL_DRP & (reg)) && \
- (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
- (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
-
struct tcpci {
struct device *dev;
@@ -218,23 +213,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc,
TCPC_CMD_LOOK4CONNECTION);
}
-static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
-{
- switch (cc) {
- case 0x1:
- return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
- case 0x2:
- return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
- case 0x3:
- if (sink)
- return TYPEC_CC_RP_3_0;
- fallthrough;
- case 0x0:
- default:
- return TYPEC_CC_OPEN;
- }
-}
-
static int tcpci_get_cc(struct tcpc_dev *tcpc,
enum typec_cc_status *cc1, enum typec_cc_status *cc2)
{
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c
new file mode 100644
index 000000000000..c5bb201a5163
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+
+#define MT6370_REG_SYSCTRL8 0x9B
+
+#define MT6370_AUTOIDLE_MASK BIT(3)
+
+#define MT6370_VENDOR_ID 0x29CF
+#define MT6370_TCPC_DID_A 0x2170
+
+struct mt6370_priv {
+ struct device *dev;
+ struct regulator *vbus;
+ struct tcpci *tcpci;
+ struct tcpci_data tcpci_data;
+};
+
+static const struct reg_sequence mt6370_reg_init[] = {
+ REG_SEQ(0xA0, 0x1, 1000),
+ REG_SEQ(0x81, 0x38, 0),
+ REG_SEQ(0x82, 0x82, 0),
+ REG_SEQ(0xBA, 0xFC, 0),
+ REG_SEQ(0xBB, 0x50, 0),
+ REG_SEQ(0x9E, 0x8F, 0),
+ REG_SEQ(0xA1, 0x5, 0),
+ REG_SEQ(0xA2, 0x4, 0),
+ REG_SEQ(0xA3, 0x4A, 0),
+ REG_SEQ(0xA4, 0x01, 0),
+ REG_SEQ(0x95, 0x01, 0),
+ REG_SEQ(0x80, 0x71, 0),
+ REG_SEQ(0x9B, 0x3A, 1000),
+};
+
+static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+ u16 did;
+ int ret;
+
+ ret = regmap_register_patch(data->regmap, mt6370_reg_init,
+ ARRAY_SIZE(mt6370_reg_init));
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16));
+ if (ret)
+ return ret;
+
+ if (did == MT6370_TCPC_DID_A)
+ return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
+
+ return 0;
+}
+
+static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data,
+ bool enable)
+{
+ return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8,
+ MT6370_AUTOIDLE_MASK,
+ enable ? 0 : MT6370_AUTOIDLE_MASK);
+}
+
+static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data,
+ bool source, bool sink)
+{
+ struct mt6370_priv *priv = container_of(data, struct mt6370_priv,
+ tcpci_data);
+ int ret;
+
+ ret = regulator_is_enabled(priv->vbus);
+ if (ret < 0)
+ return ret;
+
+ if (ret && !source)
+ return regulator_disable(priv->vbus);
+
+ if (!ret && source)
+ return regulator_enable(priv->vbus);
+
+ return 0;
+}
+
+static irqreturn_t mt6370_irq_handler(int irq, void *dev_id)
+{
+ struct mt6370_priv *priv = dev_id;
+
+ return tcpci_irq(priv->tcpci);
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+ struct regmap *regmap = priv->tcpci_data.regmap;
+ u16 vid;
+ int ret;
+
+ ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16));
+ if (ret)
+ return ret;
+
+ if (vid != MT6370_VENDOR_ID)
+ return dev_err_probe(priv->dev, -ENODEV,
+ "Vendor ID not correct 0x%02x\n", vid);
+
+ return 0;
+}
+
+static void mt6370_unregister_tcpci_port(void *tcpci)
+{
+ tcpci_unregister_port(tcpci);
+}
+
+static int mt6370_tcpc_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ struct device *dev = &pdev->dev;
+ int irq, ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL);
+ if (!priv->tcpci_data.regmap)
+ return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
+
+ ret = mt6370_check_vendor_info(priv);
+ if (ret)
+ return ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return dev_err_probe(dev, irq, "Failed to get irq\n");
+
+ /* Assign TCPCI feature and ops */
+ priv->tcpci_data.auto_discharge_disconnect = 1;
+ priv->tcpci_data.init = mt6370_tcpc_init;
+ priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn;
+
+ priv->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (!IS_ERR(priv->vbus))
+ priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus;
+
+ priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data);
+ if (IS_ERR(priv->tcpci))
+ return dev_err_probe(dev, PTR_ERR(priv->tcpci),
+ "Failed to register tcpci port\n");
+
+ ret = devm_add_action_or_reset(dev, mt6370_unregister_tcpci_port, priv->tcpci);
+ if (ret)
+ return ret;
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, mt6370_irq_handler,
+ IRQF_ONESHOT, dev_name(dev), priv);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to allocate irq\n");
+
+ device_init_wakeup(dev, true);
+ dev_pm_set_wake_irq(dev, irq);
+
+ return 0;
+}
+
+static int mt6370_tcpc_remove(struct platform_device *pdev)
+{
+ dev_pm_clear_wake_irq(&pdev->dev);
+ device_init_wakeup(&pdev->dev, false);
+
+ return 0;
+}
+
+static const struct of_device_id mt6370_tcpc_devid_table[] = {
+ { .compatible = "mediatek,mt6370-tcpc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table);
+
+static struct platform_driver mt6370_tcpc_driver = {
+ .driver = {
+ .name = "mt6370-tcpc",
+ .of_match_table = mt6370_tcpc_devid_table,
+ },
+ .probe = mt6370_tcpc_probe,
+ .remove = mt6370_tcpc_remove,
+};
+module_platform_driver(mt6370_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index c1327713f06d..7b217c712c11 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -5,6 +5,7 @@
* Richtek RT1711H Type-C Chip Driver
*/
+#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
@@ -13,16 +14,27 @@
#include <linux/usb/tcpci.h>
#include <linux/usb/tcpm.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#define RT1711H_VID 0x29CF
#define RT1711H_PID 0x1711
+#define RT1711H_DID 0x2171
+#define RT1715_DID 0x2173
-#define RT1711H_RTCTRL8 0x9B
+#define RT1711H_PHYCTRL1 0x80
+#define RT1711H_PHYCTRL2 0x81
+
+#define RT1711H_RTCTRL4 0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL BIT(0)
+#define RT1711H_RTCTRL8 0x9B
/* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
#define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
(((ck300) << 7) | ((ship_off) << 5) | \
((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN BIT(3)
+#define RT1711H_ENEXTMSG BIT(4)
#define RT1711H_RTCTRL11 0x9E
@@ -35,10 +47,17 @@
#define RT1711H_RTCTRL15 0xA2
#define RT1711H_RTCTRL16 0xA3
+#define RT1711H_RTCTRL18 0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN BIT(0)
+
struct rt1711h_chip {
struct tcpci_data data;
struct tcpci *tcpci;
struct device *dev;
+ struct regulator *vbus;
+ bool src_en;
+ u16 did;
};
static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -75,8 +94,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
{
- int ret;
struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+ struct regmap *regmap = chip->data.regmap;
+ int ret;
/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -84,6 +104,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
if (ret < 0)
return ret;
+ /* Enable PD30 extended message for RT1715 */
+ if (chip->did == RT1715_DID) {
+ ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+ RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+ if (ret < 0)
+ return ret;
+ }
+
/* I2C reset : (val + 1) * 12.5ms */
ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -101,7 +129,37 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
return ret;
/* dcSRC.DRP : 33% */
- return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+ ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+ if (ret < 0)
+ return ret;
+
+ /* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */
+ ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+ if (ret < 0)
+ return ret;
+
+ /* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+ /* wait time : (val * .4167) us */
+ return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+ bool src, bool snk)
+{
+ struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+ int ret;
+
+ if (chip->src_en == src)
+ return 0;
+
+ if (src)
+ ret = regulator_enable(chip->vbus);
+ else
+ ret = regulator_disable(chip->vbus);
+
+ if (!ret)
+ chip->src_en = src;
+ return ret;
}
static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -109,8 +167,55 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
{
struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
- return rt1711h_write8(chip, RT1711H_RTCTRL8,
- RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+ return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+ RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
+}
+
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+ int ret, cc1, cc2;
+ u8 role = 0;
+ u32 rxdz_en, rxdz_sel;
+
+ ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+ if (ret < 0)
+ return ret;
+
+ cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+ TCPC_CC_STATUS_CC1_MASK,
+ status & TCPC_CC_STATUS_TERM ||
+ tcpc_presenting_rd(role, CC1));
+ cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+ TCPC_CC_STATUS_CC2_MASK,
+ status & TCPC_CC_STATUS_TERM ||
+ tcpc_presenting_rd(role, CC2));
+
+ if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+ (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+ rxdz_en = BMCIO_RXDZEN;
+ if (chip->did == RT1715_DID)
+ rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+ else
+ rxdz_sel = 0;
+ } else {
+ rxdz_en = 0;
+ rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+ }
+
+ ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+ BMCIO_RXDZEN, rxdz_en);
+ if (ret < 0)
+ return ret;
+
+ return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+ RT1711H_BMCIO_RXDZSEL, rxdz_sel);
}
static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
@@ -173,6 +278,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
/* Clear cc change event triggered by starting toggling */
if (status & TCPC_CC_STATUS_TOGGLING)
rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+ else
+ rt1711h_init_cc_params(chip, status);
}
out:
@@ -191,7 +298,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
return 0;
}
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
{
int ret;
@@ -209,7 +316,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
return -ENODEV;
}
- return 0;
+ ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+ if (ret < 0)
+ return ret;
+ if (ret != chip->did) {
+ dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+ return -ENODEV;
+ }
+ dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+ return ret;
}
static int rt1711h_probe(struct i2c_client *client,
@@ -218,16 +333,18 @@ static int rt1711h_probe(struct i2c_client *client,
int ret;
struct rt1711h_chip *chip;
- ret = rt1711h_check_revision(client);
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->did = (size_t)device_get_match_data(&client->dev);
+
+ ret = rt1711h_check_revision(client, chip);
if (ret < 0) {
dev_err(&client->dev, "check vid/pid fail\n");
return ret;
}
- chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
chip->data.regmap = devm_regmap_init_i2c(client,
&rt1711h_regmap_config);
if (IS_ERR(chip->data.regmap))
@@ -245,7 +362,12 @@ static int rt1711h_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ chip->vbus = devm_regulator_get(&client->dev, "vbus");
+ if (IS_ERR(chip->vbus))
+ return PTR_ERR(chip->vbus);
+
chip->data.init = rt1711h_init;
+ chip->data.set_vbus = rt1711h_set_vbus;
chip->data.set_vconn = rt1711h_set_vconn;
chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
@@ -272,13 +394,15 @@ static void rt1711h_remove(struct i2c_client *client)
static const struct i2c_device_id rt1711h_id[] = {
{ "rt1711h", 0 },
+ { "rt1715", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rt1711h_id);
#ifdef CONFIG_OF
static const struct of_device_id rt1711h_of_match[] = {
- { .compatible = "richtek,rt1711h", },
+ { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+ { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
{},
};
MODULE_DEVICE_TABLE(of, rt1711h_of_match);
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 6364f0d467ea..74fb5a4c6f21 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1067,11 +1067,9 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
cap->fwnode = ucsi_find_fwnode(con);
con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
- if (IS_ERR(con->usb_role_sw)) {
- dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
- con->num);
- return PTR_ERR(con->usb_role_sw);
- }
+ if (IS_ERR(con->usb_role_sw))
+ return dev_err_probe(ucsi->dev, PTR_ERR(con->usb_role_sw),
+ "con%d: failed to get usb role switch\n", con->num);
/* Delay other interactions with the con until registration is complete */
mutex_lock(&con->lock);
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 349756335362..835f1c4372ba 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -125,6 +125,11 @@ struct version_format {
#define CCG_FW_BUILD_NVIDIA (('n' << 8) | 'v')
#define CCG_OLD_FW_VERSION (CCG_VERSION(0x31) | CCG_VERSION_PATCH(10))
+/* Firmware for Tegra doesn't support UCSI ALT command, built
+ * for NVIDIA has known issue of reporting wrong capability info
+ */
+#define CCG_FW_BUILD_NVIDIA_TEGRA (('g' << 8) | 'n')
+
/* Altmode offset for NVIDIA Function Test Board (FTB) */
#define NVIDIA_FTB_DP_OFFSET (2)
#define NVIDIA_FTB_DBG_OFFSET (3)
@@ -513,6 +518,7 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
{
struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
+ struct ucsi_capability *cap;
struct ucsi_altmode *alt;
int ret;
@@ -536,6 +542,12 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
ucsi_ccg_nvidia_altmode(uc, alt);
}
break;
+ case UCSI_GET_CAPABILITY:
+ if (uc->fw_build == CCG_FW_BUILD_NVIDIA_TEGRA) {
+ cap = val;
+ cap->features &= ~UCSI_CAP_ALT_MODE_DETAILS;
+ }
+ break;
default:
break;
}
diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
index 16289ff583b4..7b92f0c8de70 100644
--- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
+++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
@@ -599,7 +599,7 @@ static int ucsi_stm32g0_probe_bootloader(struct ucsi *ucsi)
g0->i2c_bl = i2c_new_dummy_device(g0->client->adapter, STM32G0_I2C_BL_ADDR);
if (IS_ERR(g0->i2c_bl)) {
ret = dev_err_probe(g0->dev, PTR_ERR(g0->i2c_bl),
- "Failed to register booloader I2C address\n");
+ "Failed to register bootloader I2C address\n");
return ret;
}
}
diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
index 77a5b3f8736a..e8c3131a8543 100644
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -100,7 +100,7 @@ static int add_match_busid(char *busid)
for (i = 0; i < MAX_BUSID; i++) {
spin_lock(&busid_table[i].busid_lock);
if (!busid_table[i].name[0]) {
- strlcpy(busid_table[i].name, busid, BUSID_SIZE);
+ strscpy(busid_table[i].name, busid, BUSID_SIZE);
if ((busid_table[i].status != STUB_BUSID_ALLOC) &&
(busid_table[i].status != STUB_BUSID_REMOV))
busid_table[i].status = STUB_BUSID_ADDED;
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 5dd41e8215e0..fc01b31bbb87 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -464,7 +464,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
int nents;
int num_urbs = 1;
int pipe = get_pipe(sdev, pdu);
- int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
+ int use_sg = pdu->u.cmd_submit.transfer_flags & USBIP_URB_DMA_MAP_SG;
int support_sg = 1;
int np = 0;
int ret, i;
@@ -514,7 +514,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
num_urbs = nents;
priv->completed_urbs = 0;
pdu->u.cmd_submit.transfer_flags &=
- ~URB_DMA_MAP_SG;
+ ~USBIP_URB_DMA_MAP_SG;
}
} else {
buffer = kzalloc(buf_len, GFP_KERNEL);
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
index 2ab99244bc31..053a2bca4c47 100644
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -344,6 +344,91 @@ static unsigned int tweak_transfer_flags(unsigned int flags)
return flags;
}
+/*
+ * USBIP driver packs URB transfer flags in PDUs that are exchanged
+ * between Server (usbip_host) and Client (vhci_hcd). URB_* flags
+ * are internal to kernel and could change. Where as USBIP URB flags
+ * exchanged in PDUs are USBIP user API must not change.
+ *
+ * USBIP_URB* flags are exported as explicit API and client and server
+ * do mapping from kernel flags to USBIP_URB*. Details as follows:
+ *
+ * Client tx path (USBIP_CMD_SUBMIT):
+ * - Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet.
+ *
+ * Server rx path (USBIP_CMD_SUBMIT):
+ * - Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet.
+ *
+ * Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets
+ * and no special handling is needed for them in the following cases:
+ * - Server rx path (USBIP_CMD_UNLINK)
+ * - Client rx path & Server tx path (USBIP_RET_SUBMIT)
+ *
+ * Code paths:
+ * usbip_pack_pdu() is the common routine that handles packing pdu from
+ * urb and unpack pdu to an urb.
+ *
+ * usbip_pack_cmd_submit() and usbip_pack_ret_submit() handle
+ * USBIP_CMD_SUBMIT and USBIP_RET_SUBMIT respectively.
+ *
+ * usbip_map_urb_to_usbip() and usbip_map_usbip_to_urb() are used
+ * by usbip_pack_cmd_submit() and usbip_pack_ret_submit() to map
+ * flags.
+ */
+
+struct urb_to_usbip_flags {
+ u32 urb_flag;
+ u32 usbip_flag;
+};
+
+#define NUM_USBIP_FLAGS 17
+
+static const struct urb_to_usbip_flags flag_map[NUM_USBIP_FLAGS] = {
+ {URB_SHORT_NOT_OK, USBIP_URB_SHORT_NOT_OK},
+ {URB_ISO_ASAP, USBIP_URB_ISO_ASAP},
+ {URB_NO_TRANSFER_DMA_MAP, USBIP_URB_NO_TRANSFER_DMA_MAP},
+ {URB_ZERO_PACKET, USBIP_URB_ZERO_PACKET},
+ {URB_NO_INTERRUPT, USBIP_URB_NO_INTERRUPT},
+ {URB_FREE_BUFFER, USBIP_URB_FREE_BUFFER},
+ {URB_DIR_IN, USBIP_URB_DIR_IN},
+ {URB_DIR_OUT, USBIP_URB_DIR_OUT},
+ {URB_DIR_MASK, USBIP_URB_DIR_MASK},
+ {URB_DMA_MAP_SINGLE, USBIP_URB_DMA_MAP_SINGLE},
+ {URB_DMA_MAP_PAGE, USBIP_URB_DMA_MAP_PAGE},
+ {URB_DMA_MAP_SG, USBIP_URB_DMA_MAP_SG},
+ {URB_MAP_LOCAL, USBIP_URB_MAP_LOCAL},
+ {URB_SETUP_MAP_SINGLE, USBIP_URB_SETUP_MAP_SINGLE},
+ {URB_SETUP_MAP_LOCAL, USBIP_URB_SETUP_MAP_LOCAL},
+ {URB_DMA_SG_COMBINED, USBIP_URB_DMA_SG_COMBINED},
+ {URB_ALIGNED_TEMP_BUFFER, USBIP_URB_ALIGNED_TEMP_BUFFER},
+};
+
+static unsigned int urb_to_usbip(unsigned int flags)
+{
+ unsigned int map_flags = 0;
+ int loop;
+
+ for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) {
+ if (flags & flag_map[loop].urb_flag)
+ map_flags |= flag_map[loop].usbip_flag;
+ }
+
+ return map_flags;
+}
+
+static unsigned int usbip_to_urb(unsigned int flags)
+{
+ unsigned int map_flags = 0;
+ int loop;
+
+ for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) {
+ if (flags & flag_map[loop].usbip_flag)
+ map_flags |= flag_map[loop].urb_flag;
+ }
+
+ return map_flags;
+}
+
static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb,
int pack)
{
@@ -354,14 +439,14 @@ static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb,
* will be discussed when usbip is ported to other operating systems.
*/
if (pack) {
- spdu->transfer_flags =
- tweak_transfer_flags(urb->transfer_flags);
+ /* map after tweaking the urb flags */
+ spdu->transfer_flags = urb_to_usbip(tweak_transfer_flags(urb->transfer_flags));
spdu->transfer_buffer_length = urb->transfer_buffer_length;
spdu->start_frame = urb->start_frame;
spdu->number_of_packets = urb->number_of_packets;
spdu->interval = urb->interval;
} else {
- urb->transfer_flags = spdu->transfer_flags;
+ urb->transfer_flags = usbip_to_urb(spdu->transfer_flags);
urb->transfer_buffer_length = spdu->transfer_buffer_length;
urb->start_frame = spdu->start_frame;
urb->number_of_packets = spdu->number_of_packets;
diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
index 3a35e74cdc61..70998e6dd6fd 100644
--- a/include/linux/phy/tegra/xusb.h
+++ b/include/linux/phy/tegra/xusb.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2016-2020, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2022, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef PHY_TEGRA_XUSB_H
@@ -21,6 +21,8 @@ int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
unsigned int port, bool enable);
int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
bool val);
+void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy);
+void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy);
int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl,
unsigned int port);
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
index 07394819d03b..c0fbe1fe3426 100644
--- a/include/linux/platform_data/usb-s3c2410_udc.h
+++ b/include/linux/platform_data/usb-s3c2410_udc.h
@@ -22,12 +22,6 @@ enum s3c2410_udc_cmd_e {
struct s3c2410_udc_mach_info {
void (*udc_command)(enum s3c2410_udc_cmd_e);
void (*vbus_draw)(unsigned int ma);
-
- unsigned int pullup_pin;
- unsigned int pullup_pin_inverted;
-
- unsigned int vbus_pin;
- unsigned char vbus_pin_inverted;
};
extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edf3342507f1..ee38835ed77c 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -62,6 +62,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
#define CI_HDRC_IMX_IS_HSIC BIT(14)
#define CI_HDRC_PMQOS BIT(15)
+#define CI_HDRC_PHY_VBUS_CONTROL BIT(16)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 67f8713d3fa3..78cd566ee238 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -479,7 +479,6 @@ static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
struct pci_dev;
struct pci_device_id;
extern int usb_hcd_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id,
const struct hc_driver *driver);
extern void usb_hcd_pci_remove(struct pci_dev *dev);
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
index 20c0bedb8ec8..17657451c762 100644
--- a/include/linux/usb/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -167,6 +167,11 @@
/* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
#define TCPC_TRANSMIT_BUFFER_MAX_LEN 31
+#define tcpc_presenting_rd(reg, cc) \
+ (!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+ (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
+ (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
+
struct tcpci;
/*
@@ -207,4 +212,21 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci);
struct tcpm_port;
struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
+
+static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
+{
+ switch (cc) {
+ case 0x1:
+ return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
+ case 0x2:
+ return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
+ case 0x3:
+ if (sink)
+ return TYPEC_CC_RP_3_0;
+ fallthrough;
+ case 0x0:
+ default:
+ return TYPEC_CC_OPEN;
+ }
+}
#endif /* __LINUX_USB_TCPCI_H */
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index b708d63995f4..725ff91b26e0 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -540,6 +540,10 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat,
s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul,
unsigned int div);
+void v4l2_simplify_fraction(u32 *numerator, u32 *denominator,
+ unsigned int n_terms, unsigned int threshold);
+u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator);
+
static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf)
{
/*
diff --git a/include/media/v4l2-uvc.h b/include/media/v4l2-uvc.h
new file mode 100644
index 000000000000..f83e31661333
--- /dev/null
+++ b/include/media/v4l2-uvc.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * v4l2 uvc internal API header
+ *
+ * Some commonly needed functions for uvc drivers
+ */
+
+#ifndef __LINUX_V4L2_UVC_H
+#define __LINUX_V4L2_UVC_H
+
+/* ------------------------------------------------------------------------
+ * GUIDs
+ */
+#define UVC_GUID_UVC_CAMERA \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}
+#define UVC_GUID_UVC_OUTPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02}
+#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+#define UVC_GUID_UVC_PROCESSING \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01}
+#define UVC_GUID_UVC_SELECTOR \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02}
+#define UVC_GUID_EXT_GPIO_CONTROLLER \
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03}
+
+#define UVC_GUID_FORMAT_MJPEG \
+ { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YUY2 \
+ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YUY2_ISIGHT \
+ { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0x00, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_NV12 \
+ { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_YV12 \
+ { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_I420 \
+ { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_UYVY \
+ { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y800 \
+ { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y8 \
+ { 'Y', '8', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y10 \
+ { 'Y', '1', '0', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y12 \
+ { 'Y', '1', '2', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y16 \
+ { 'Y', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BY8 \
+ { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BA81 \
+ { 'B', 'A', '8', '1', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_GBRG \
+ { 'G', 'B', 'R', 'G', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_GRBG \
+ { 'G', 'R', 'B', 'G', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_RGGB \
+ { 'R', 'G', 'G', 'B', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BG16 \
+ { 'B', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_GB16 \
+ { 'G', 'B', '1', '6', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_RG16 \
+ { 'R', 'G', '1', '6', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_GR16 \
+ { 'G', 'R', '1', '6', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_RGBP \
+ { 'R', 'G', 'B', 'P', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_BGR3 \
+ { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \
+ 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70}
+#define UVC_GUID_FORMAT_M420 \
+ { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+#define UVC_GUID_FORMAT_H264 \
+ { 'H', '2', '6', '4', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_H265 \
+ { 'H', '2', '6', '5', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y8I \
+ { 'Y', '8', 'I', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Y12I \
+ { 'Y', '1', '2', 'I', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_Z16 \
+ { 'Z', '1', '6', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_RW10 \
+ { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_INVZ \
+ { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \
+ 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b}
+#define UVC_GUID_FORMAT_INZI \
+ { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \
+ 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a}
+#define UVC_GUID_FORMAT_INVI \
+ { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \
+ 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f}
+#define UVC_GUID_FORMAT_CNF4 \
+ { 'C', ' ', ' ', ' ', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+#define UVC_GUID_FORMAT_D3DFMT_L8 \
+ {0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+#define UVC_GUID_FORMAT_KSMEDIA_L8_IR \
+ {0x32, 0x00, 0x00, 0x00, 0x02, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+#define UVC_GUID_FORMAT_HEVC \
+ { 'H', 'E', 'V', 'C', 0x00, 0x00, 0x10, 0x00, \
+ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71}
+
+/* ------------------------------------------------------------------------
+ * Video formats
+ */
+
+struct uvc_format_desc {
+ char *name;
+ u8 guid[16];
+ u32 fcc;
+};
+
+static struct uvc_format_desc uvc_fmts[] = {
+ {
+ .name = "YUV 4:2:2 (YUYV)",
+ .guid = UVC_GUID_FORMAT_YUY2,
+ .fcc = V4L2_PIX_FMT_YUYV,
+ },
+ {
+ .name = "YUV 4:2:2 (YUYV)",
+ .guid = UVC_GUID_FORMAT_YUY2_ISIGHT,
+ .fcc = V4L2_PIX_FMT_YUYV,
+ },
+ {
+ .name = "YUV 4:2:0 (NV12)",
+ .guid = UVC_GUID_FORMAT_NV12,
+ .fcc = V4L2_PIX_FMT_NV12,
+ },
+ {
+ .name = "MJPEG",
+ .guid = UVC_GUID_FORMAT_MJPEG,
+ .fcc = V4L2_PIX_FMT_MJPEG,
+ },
+ {
+ .name = "YVU 4:2:0 (YV12)",
+ .guid = UVC_GUID_FORMAT_YV12,
+ .fcc = V4L2_PIX_FMT_YVU420,
+ },
+ {
+ .name = "YUV 4:2:0 (I420)",
+ .guid = UVC_GUID_FORMAT_I420,
+ .fcc = V4L2_PIX_FMT_YUV420,
+ },
+ {
+ .name = "YUV 4:2:0 (M420)",
+ .guid = UVC_GUID_FORMAT_M420,
+ .fcc = V4L2_PIX_FMT_M420,
+ },
+ {
+ .name = "YUV 4:2:2 (UYVY)",
+ .guid = UVC_GUID_FORMAT_UYVY,
+ .fcc = V4L2_PIX_FMT_UYVY,
+ },
+ {
+ .name = "Greyscale 8-bit (Y800)",
+ .guid = UVC_GUID_FORMAT_Y800,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "Greyscale 8-bit (Y8 )",
+ .guid = UVC_GUID_FORMAT_Y8,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "Greyscale 8-bit (D3DFMT_L8)",
+ .guid = UVC_GUID_FORMAT_D3DFMT_L8,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "IR 8-bit (L8_IR)",
+ .guid = UVC_GUID_FORMAT_KSMEDIA_L8_IR,
+ .fcc = V4L2_PIX_FMT_GREY,
+ },
+ {
+ .name = "Greyscale 10-bit (Y10 )",
+ .guid = UVC_GUID_FORMAT_Y10,
+ .fcc = V4L2_PIX_FMT_Y10,
+ },
+ {
+ .name = "Greyscale 12-bit (Y12 )",
+ .guid = UVC_GUID_FORMAT_Y12,
+ .fcc = V4L2_PIX_FMT_Y12,
+ },
+ {
+ .name = "Greyscale 16-bit (Y16 )",
+ .guid = UVC_GUID_FORMAT_Y16,
+ .fcc = V4L2_PIX_FMT_Y16,
+ },
+ {
+ .name = "BGGR Bayer (BY8 )",
+ .guid = UVC_GUID_FORMAT_BY8,
+ .fcc = V4L2_PIX_FMT_SBGGR8,
+ },
+ {
+ .name = "BGGR Bayer (BA81)",
+ .guid = UVC_GUID_FORMAT_BA81,
+ .fcc = V4L2_PIX_FMT_SBGGR8,
+ },
+ {
+ .name = "GBRG Bayer (GBRG)",
+ .guid = UVC_GUID_FORMAT_GBRG,
+ .fcc = V4L2_PIX_FMT_SGBRG8,
+ },
+ {
+ .name = "GRBG Bayer (GRBG)",
+ .guid = UVC_GUID_FORMAT_GRBG,
+ .fcc = V4L2_PIX_FMT_SGRBG8,
+ },
+ {
+ .name = "RGGB Bayer (RGGB)",
+ .guid = UVC_GUID_FORMAT_RGGB,
+ .fcc = V4L2_PIX_FMT_SRGGB8,
+ },
+ {
+ .name = "RGB565",
+ .guid = UVC_GUID_FORMAT_RGBP,
+ .fcc = V4L2_PIX_FMT_RGB565,
+ },
+ {
+ .name = "BGR 8:8:8 (BGR3)",
+ .guid = UVC_GUID_FORMAT_BGR3,
+ .fcc = V4L2_PIX_FMT_BGR24,
+ },
+ {
+ .name = "H.264",
+ .guid = UVC_GUID_FORMAT_H264,
+ .fcc = V4L2_PIX_FMT_H264,
+ },
+ {
+ .name = "H.265",
+ .guid = UVC_GUID_FORMAT_H265,
+ .fcc = V4L2_PIX_FMT_HEVC,
+ },
+ {
+ .name = "Greyscale 8 L/R (Y8I)",
+ .guid = UVC_GUID_FORMAT_Y8I,
+ .fcc = V4L2_PIX_FMT_Y8I,
+ },
+ {
+ .name = "Greyscale 12 L/R (Y12I)",
+ .guid = UVC_GUID_FORMAT_Y12I,
+ .fcc = V4L2_PIX_FMT_Y12I,
+ },
+ {
+ .name = "Depth data 16-bit (Z16)",
+ .guid = UVC_GUID_FORMAT_Z16,
+ .fcc = V4L2_PIX_FMT_Z16,
+ },
+ {
+ .name = "Bayer 10-bit (SRGGB10P)",
+ .guid = UVC_GUID_FORMAT_RW10,
+ .fcc = V4L2_PIX_FMT_SRGGB10P,
+ },
+ {
+ .name = "Bayer 16-bit (SBGGR16)",
+ .guid = UVC_GUID_FORMAT_BG16,
+ .fcc = V4L2_PIX_FMT_SBGGR16,
+ },
+ {
+ .name = "Bayer 16-bit (SGBRG16)",
+ .guid = UVC_GUID_FORMAT_GB16,
+ .fcc = V4L2_PIX_FMT_SGBRG16,
+ },
+ {
+ .name = "Bayer 16-bit (SRGGB16)",
+ .guid = UVC_GUID_FORMAT_RG16,
+ .fcc = V4L2_PIX_FMT_SRGGB16,
+ },
+ {
+ .name = "Bayer 16-bit (SGRBG16)",
+ .guid = UVC_GUID_FORMAT_GR16,
+ .fcc = V4L2_PIX_FMT_SGRBG16,
+ },
+ {
+ .name = "Depth data 16-bit (Z16)",
+ .guid = UVC_GUID_FORMAT_INVZ,
+ .fcc = V4L2_PIX_FMT_Z16,
+ },
+ {
+ .name = "Greyscale 10-bit (Y10 )",
+ .guid = UVC_GUID_FORMAT_INVI,
+ .fcc = V4L2_PIX_FMT_Y10,
+ },
+ {
+ .name = "IR:Depth 26-bit (INZI)",
+ .guid = UVC_GUID_FORMAT_INZI,
+ .fcc = V4L2_PIX_FMT_INZI,
+ },
+ {
+ .name = "4-bit Depth Confidence (Packed)",
+ .guid = UVC_GUID_FORMAT_CNF4,
+ .fcc = V4L2_PIX_FMT_CNF4,
+ },
+ {
+ .name = "HEVC",
+ .guid = UVC_GUID_FORMAT_HEVC,
+ .fcc = V4L2_PIX_FMT_HEVC,
+ },
+};
+
+static inline struct uvc_format_desc *uvc_format_by_guid(const u8 guid[16])
+{
+ unsigned int len = ARRAY_SIZE(uvc_fmts);
+ unsigned int i;
+
+ for (i = 0; i < len; ++i) {
+ if (memcmp(guid, uvc_fmts[i].guid, 16) == 0)
+ return &uvc_fmts[i];
+ }
+
+ return NULL;
+}
+
+#endif /* __LINUX_V4L2_UVC_H */
diff --git a/include/uapi/linux/usbip.h b/include/uapi/linux/usbip.h
index fd393d908d8a..e4421ad55b2e 100644
--- a/include/uapi/linux/usbip.h
+++ b/include/uapi/linux/usbip.h
@@ -24,4 +24,30 @@ enum usbip_device_status {
VDEV_ST_USED,
VDEV_ST_ERROR
};
+
+/* USB URB Transfer flags:
+ *
+ * USBIP server and client (vchi) pack URBs in TCP packets. The following
+ * are the transfer type defines used in USBIP protocol.
+ */
+
+#define USBIP_URB_SHORT_NOT_OK 0x0001
+#define USBIP_URB_ISO_ASAP 0x0002
+#define USBIP_URB_NO_TRANSFER_DMA_MAP 0x0004
+#define USBIP_URB_ZERO_PACKET 0x0040
+#define USBIP_URB_NO_INTERRUPT 0x0080
+#define USBIP_URB_FREE_BUFFER 0x0100
+#define USBIP_URB_DIR_IN 0x0200
+#define USBIP_URB_DIR_OUT 0
+#define USBIP_URB_DIR_MASK USBIP_URB_DIR_IN
+
+#define USBIP_URB_DMA_MAP_SINGLE 0x00010000
+#define USBIP_URB_DMA_MAP_PAGE 0x00020000
+#define USBIP_URB_DMA_MAP_SG 0x00040000
+#define USBIP_URB_MAP_LOCAL 0x00080000
+#define USBIP_URB_SETUP_MAP_SINGLE 0x00100000
+#define USBIP_URB_SETUP_MAP_LOCAL 0x00200000
+#define USBIP_URB_DMA_SG_COMBINED 0x00400000
+#define USBIP_URB_ALIGNED_TEMP_BUFFER 0x00800000
+
#endif /* _UAPI_LINUX_USBIP_H */