summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-25 20:37:26 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-25 20:37:26 +0400
commitda89fb165e5e51a2ec1ff8a0ff6bc052d1068184 (patch)
tree1f15b6177a886ceef83d60c3b5a7af926442f581
parentd5adf235adc8d8d67c10afd43922c92753f6be3c (diff)
parentb25b086d23eb852bf3cfdeb60409b4967ebb3c0c (diff)
downloadlinux-da89fb165e5e51a2ec1ff8a0ff6bc052d1068184.tar.xz
Merge tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf
Pull dma-buf updates from Sumit Semwal: "Here's the first signed-tag pull request for dma-buf framework. It includes the following key items: - mmap support - vmap support - related documentation updates These are needed by various drivers to allow mmap/vmap of dma-buf shared buffers. Dave Airlie has some prime patches dependent on the vmap pull as well." * tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf: dma-buf: add initial vmap documentation dma-buf: minor documentation fixes. dma-buf: add vmap interface dma-buf: mmap support
-rw-r--r--Documentation/dma-buf-sharing.txt109
-rw-r--r--drivers/base/dma-buf.c99
-rw-r--r--include/linux/dma-buf.h33
3 files changed, 233 insertions, 8 deletions
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index 3bbd5c51605a..ad86fb86c9a0 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -29,13 +29,6 @@ The buffer-user
in memory, mapped into its own address space, so it can access the same area
of memory.
-*IMPORTANT*: [see https://lkml.org/lkml/2011/12/20/211 for more details]
-For this first version, A buffer shared using the dma_buf sharing API:
-- *may* be exported to user space using "mmap" *ONLY* by exporter, outside of
- this framework.
-- with this new iteration of the dma-buf api cpu access from the kernel has been
- enable, see below for the details.
-
dma-buf operations for device dma only
--------------------------------------
@@ -300,6 +293,17 @@ Access to a dma_buf from the kernel context involves three steps:
Note that these calls need to always succeed. The exporter needs to complete
any preparations that might fail in begin_cpu_access.
+ For some cases the overhead of kmap can be too high, a vmap interface
+ is introduced. This interface should be used very carefully, as vmalloc
+ space is a limited resources on many architectures.
+
+ Interfaces:
+ void *dma_buf_vmap(struct dma_buf *dmabuf)
+ void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
+
+ The vmap call can fail if there is no vmap support in the exporter, or if it
+ runs out of vmalloc space. Fallback to kmap should be implemented.
+
3. Finish access
When the importer is done accessing the range specified in begin_cpu_access,
@@ -313,6 +317,83 @@ Access to a dma_buf from the kernel context involves three steps:
enum dma_data_direction dir);
+Direct Userspace Access/mmap Support
+------------------------------------
+
+Being able to mmap an export dma-buf buffer object has 2 main use-cases:
+- CPU fallback processing in a pipeline and
+- supporting existing mmap interfaces in importers.
+
+1. CPU fallback processing in a pipeline
+
+ In many processing pipelines it is sometimes required that the cpu can access
+ the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid
+ the need to handle this specially in userspace frameworks for buffer sharing
+ it's ideal if the dma_buf fd itself can be used to access the backing storage
+ from userspace using mmap.
+
+ Furthermore Android's ION framework already supports this (and is otherwise
+ rather similar to dma-buf from a userspace consumer side with using fds as
+ handles, too). So it's beneficial to support this in a similar fashion on
+ dma-buf to have a good transition path for existing Android userspace.
+
+ No special interfaces, userspace simply calls mmap on the dma-buf fd.
+
+2. Supporting existing mmap interfaces in exporters
+
+ Similar to the motivation for kernel cpu access it is again important that
+ the userspace code of a given importing subsystem can use the same interfaces
+ with a imported dma-buf buffer object as with a native buffer object. This is
+ especially important for drm where the userspace part of contemporary OpenGL,
+ X, and other drivers is huge, and reworking them to use a different way to
+ mmap a buffer rather invasive.
+
+ The assumption in the current dma-buf interfaces is that redirecting the
+ initial mmap is all that's needed. A survey of some of the existing
+ subsystems shows that no driver seems to do any nefarious thing like syncing
+ up with outstanding asynchronous processing on the device or allocating
+ special resources at fault time. So hopefully this is good enough, since
+ adding interfaces to intercept pagefaults and allow pte shootdowns would
+ increase the complexity quite a bit.
+
+ Interface:
+ int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
+ unsigned long);
+
+ If the importing subsystem simply provides a special-purpose mmap call to set
+ up a mapping in userspace, calling do_mmap with dma_buf->file will equally
+ achieve that for a dma-buf object.
+
+3. Implementation notes for exporters
+
+ Because dma-buf buffers have invariant size over their lifetime, the dma-buf
+ core checks whether a vma is too large and rejects such mappings. The
+ exporter hence does not need to duplicate this check.
+
+ Because existing importing subsystems might presume coherent mappings for
+ userspace, the exporter needs to set up a coherent mapping. If that's not
+ possible, it needs to fake coherency by manually shooting down ptes when
+ leaving the cpu domain and flushing caches at fault time. Note that all the
+ dma_buf files share the same anon inode, hence the exporter needs to replace
+ the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
+ requred. This is because the kernel uses the underlying inode's address_space
+ for vma tracking (and hence pte tracking at shootdown time with
+ unmap_mapping_range).
+
+ If the above shootdown dance turns out to be too expensive in certain
+ scenarios, we can extend dma-buf with a more explicit cache tracking scheme
+ for userspace mappings. But the current assumption is that using mmap is
+ always a slower path, so some inefficiencies should be acceptable.
+
+ Exporters that shoot down mappings (for any reasons) shall not do any
+ synchronization at fault time with outstanding device operations.
+ Synchronization is an orthogonal issue to sharing the backing storage of a
+ buffer and hence should not be handled by dma-buf itself. This is explictly
+ mentioned here because many people seem to want something like this, but if
+ different exporters handle this differently, buffer sharing can fail in
+ interesting ways depending upong the exporter (if userspace starts depending
+ upon this implicit synchronization).
+
Miscellaneous notes
-------------------
@@ -336,6 +417,20 @@ Miscellaneous notes
the exporting driver to create a dmabuf fd must provide a way to let
userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd().
+- If an exporter needs to manually flush caches and hence needs to fake
+ coherency for mmap support, it needs to be able to zap all the ptes pointing
+ at the backing storage. Now linux mm needs a struct address_space associated
+ with the struct file stored in vma->vm_file to do that with the function
+ unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd
+ with the anon_file struct file, i.e. all dma_bufs share the same file.
+
+ Hence exporters need to setup their own file (and address_space) association
+ by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap
+ callback. In the specific case of a gem driver the exporter could use the
+ shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then
+ zap ptes by unmapping the corresponding range of the struct address_space
+ associated with their own file.
+
References:
[1] struct dma_buf_ops in include/linux/dma-buf.h
[2] All interfaces mentioned above defined in include/linux/dma-buf.h
diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c
index 05c64c11bad2..24e88fe29ec1 100644
--- a/drivers/base/dma-buf.c
+++ b/drivers/base/dma-buf.c
@@ -44,8 +44,26 @@ static int dma_buf_release(struct inode *inode, struct file *file)
return 0;
}
+static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma)
+{
+ struct dma_buf *dmabuf;
+
+ if (!is_dma_buf_file(file))
+ return -EINVAL;
+
+ dmabuf = file->private_data;
+
+ /* check for overflowing the buffer's size */
+ if (vma->vm_pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) >
+ dmabuf->size >> PAGE_SHIFT)
+ return -EINVAL;
+
+ return dmabuf->ops->mmap(dmabuf, vma);
+}
+
static const struct file_operations dma_buf_fops = {
.release = dma_buf_release,
+ .mmap = dma_buf_mmap_internal,
};
/*
@@ -82,7 +100,8 @@ struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops,
|| !ops->unmap_dma_buf
|| !ops->release
|| !ops->kmap_atomic
- || !ops->kmap)) {
+ || !ops->kmap
+ || !ops->mmap)) {
return ERR_PTR(-EINVAL);
}
@@ -406,3 +425,81 @@ void dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long page_num,
dmabuf->ops->kunmap(dmabuf, page_num, vaddr);
}
EXPORT_SYMBOL_GPL(dma_buf_kunmap);
+
+
+/**
+ * dma_buf_mmap - Setup up a userspace mmap with the given vma
+ * @dmabuf: [in] buffer that should back the vma
+ * @vma: [in] vma for the mmap
+ * @pgoff: [in] offset in pages where this mmap should start within the
+ * dma-buf buffer.
+ *
+ * This function adjusts the passed in vma so that it points at the file of the
+ * dma_buf operation. It alsog adjusts the starting pgoff and does bounds
+ * checking on the size of the vma. Then it calls the exporters mmap function to
+ * set up the mapping.
+ *
+ * Can return negative error values, returns 0 on success.
+ */
+int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma,
+ unsigned long pgoff)
+{
+ if (WARN_ON(!dmabuf || !vma))
+ return -EINVAL;
+
+ /* check for offset overflow */
+ if (pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) < pgoff)
+ return -EOVERFLOW;
+
+ /* check for overflowing the buffer's size */
+ if (pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) >
+ dmabuf->size >> PAGE_SHIFT)
+ return -EINVAL;
+
+ /* readjust the vma */
+ if (vma->vm_file)
+ fput(vma->vm_file);
+
+ vma->vm_file = dmabuf->file;
+ get_file(vma->vm_file);
+
+ vma->vm_pgoff = pgoff;
+
+ return dmabuf->ops->mmap(dmabuf, vma);
+}
+EXPORT_SYMBOL_GPL(dma_buf_mmap);
+
+/**
+ * dma_buf_vmap - Create virtual mapping for the buffer object into kernel
+ * address space. Same restrictions as for vmap and friends apply.
+ * @dmabuf: [in] buffer to vmap
+ *
+ * This call may fail due to lack of virtual mapping address space.
+ * These calls are optional in drivers. The intended use for them
+ * is for mapping objects linear in kernel space for high use objects.
+ * Please attempt to use kmap/kunmap before thinking about these interfaces.
+ */
+void *dma_buf_vmap(struct dma_buf *dmabuf)
+{
+ if (WARN_ON(!dmabuf))
+ return NULL;
+
+ if (dmabuf->ops->vmap)
+ return dmabuf->ops->vmap(dmabuf);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(dma_buf_vmap);
+
+/**
+ * dma_buf_vunmap - Unmap a vmap obtained by dma_buf_vmap.
+ * @dmabuf: [in] buffer to vunmap
+ */
+void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
+{
+ if (WARN_ON(!dmabuf))
+ return;
+
+ if (dmabuf->ops->vunmap)
+ dmabuf->ops->vunmap(dmabuf, vaddr);
+}
+EXPORT_SYMBOL_GPL(dma_buf_vunmap);
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index 3efbfc2145c3..eb48f3816df9 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -61,6 +61,13 @@ struct dma_buf_attachment;
* This Callback must not sleep.
* @kmap: maps a page from the buffer into kernel address space.
* @kunmap: [optional] unmaps a page from the buffer.
+ * @mmap: used to expose the backing storage to userspace. Note that the
+ * mapping needs to be coherent - if the exporter doesn't directly
+ * support this, it needs to fake coherency by shooting down any ptes
+ * when transitioning away from the cpu domain.
+ * @vmap: [optional] creates a virtual mapping for the buffer into kernel
+ * address space. Same restrictions as for vmap and friends apply.
+ * @vunmap: [optional] unmaps a vmap from the buffer
*/
struct dma_buf_ops {
int (*attach)(struct dma_buf *, struct device *,
@@ -92,6 +99,11 @@ struct dma_buf_ops {
void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *);
void *(*kmap)(struct dma_buf *, unsigned long);
void (*kunmap)(struct dma_buf *, unsigned long, void *);
+
+ int (*mmap)(struct dma_buf *, struct vm_area_struct *vma);
+
+ void *(*vmap)(struct dma_buf *);
+ void (*vunmap)(struct dma_buf *, void *vaddr);
};
/**
@@ -167,6 +179,11 @@ void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long);
void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *);
void *dma_buf_kmap(struct dma_buf *, unsigned long);
void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);
+
+int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
+ unsigned long);
+void *dma_buf_vmap(struct dma_buf *);
+void dma_buf_vunmap(struct dma_buf *, void *vaddr);
#else
static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
@@ -248,6 +265,22 @@ static inline void dma_buf_kunmap(struct dma_buf *dmabuf,
unsigned long pnum, void *vaddr)
{
}
+
+static inline int dma_buf_mmap(struct dma_buf *dmabuf,
+ struct vm_area_struct *vma,
+ unsigned long pgoff)
+{
+ return -ENODEV;
+}
+
+static inline void *dma_buf_vmap(struct dma_buf *dmabuf)
+{
+ return NULL;
+}
+
+static inline void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
+{
+}
#endif /* CONFIG_DMA_SHARED_BUFFER */
#endif /* __DMA_BUF_H__ */