summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-07 21:11:16 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-07 21:11:16 +0400
commite0d65113a70f1dc514e625cc4e7a7485a4bf72df (patch)
tree7320a130dc304623f5cf4b5dd8f67fb1776225ca
parentcf5e15fbd72c13977720aa15b7b7e00e1d8fd8f2 (diff)
parent48e546b7f281f251893baa40769581fd15f085fb (diff)
downloadlinux-e0d65113a70f1dc514e625cc4e7a7485a4bf72df.tar.xz
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
-rw-r--r--Documentation/DocBook/mtdnand.tmpl19
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-dataflash.txt14
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c9
-rw-r--r--arch/arm/mach-at91/board-cam60.c9
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c9
-rw-r--r--arch/arm/mach-at91/board-kb9202.c9
-rw-r--r--arch/arm/mach-at91/board-neocore926.c9
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c9
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c9
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c9
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c9
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c9
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c9
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c9
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c9
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c9
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c10
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c9
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c9
-rw-r--r--arch/arm/mach-at91/include/mach/board.h3
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c2
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c3
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c2
-rw-r--r--arch/arm/mach-davinci/board-tnetv107x-evm.c2
-rw-r--r--arch/arm/mach-davinci/include/mach/nand.h4
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c23
-rw-r--r--arch/arm/mach-mmp/aspenite.c5
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c2
-rw-r--r--arch/arm/mach-pxa/cm-x300.c5
-rw-r--r--arch/arm/mach-pxa/colibri-pxa3xx.c5
-rw-r--r--arch/arm/mach-pxa/littleton.c5
-rw-r--r--arch/arm/mach-pxa/mxm8x10.c9
-rw-r--r--arch/arm/mach-pxa/raumfeld.c5
-rw-r--r--arch/arm/mach-pxa/zylonite.c5
-rw-r--r--arch/arm/plat-pxa/include/plat/pxa3xx_nand.h20
-rw-r--r--arch/avr32/boards/atngw100/setup.c8
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c9
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h3
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/nandflash.c2
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/nandflash.c2
-rw-r--r--drivers/mtd/Kconfig21
-rw-r--r--drivers/mtd/Makefile2
-rw-r--r--drivers/mtd/afs.c4
-rw-r--r--drivers/mtd/ar7part.c2
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c31
-rw-r--r--drivers/mtd/chips/fwh_lock.h3
-rw-r--r--drivers/mtd/chips/jedec_probe.c34
-rw-r--r--drivers/mtd/cmdlinepart.c7
-rw-r--r--drivers/mtd/devices/Kconfig13
-rw-r--r--drivers/mtd/devices/Makefile3
-rw-r--r--drivers/mtd/devices/doc2000.c17
-rw-r--r--drivers/mtd/devices/doc2001.c11
-rw-r--r--drivers/mtd/devices/doc2001plus.c11
-rw-r--r--drivers/mtd/devices/docecc.c2
-rw-r--r--drivers/mtd/devices/docg3.c1114
-rw-r--r--drivers/mtd/devices/docg3.h297
-rw-r--r--drivers/mtd/devices/docprobe.c5
-rw-r--r--drivers/mtd/devices/lart.c18
-rw-r--r--drivers/mtd/devices/m25p80.c92
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c91
-rw-r--r--drivers/mtd/devices/sst25l.c42
-rw-r--r--drivers/mtd/ftl.c40
-rw-r--r--drivers/mtd/inftlcore.c69
-rw-r--r--drivers/mtd/inftlmount.c116
-rw-r--r--drivers/mtd/maps/Kconfig26
-rw-r--r--drivers/mtd/maps/Makefile2
-rw-r--r--drivers/mtd/maps/bfin-async-flash.c16
-rw-r--r--drivers/mtd/maps/ceiva.c341
-rw-r--r--drivers/mtd/maps/dc21285.c9
-rw-r--r--drivers/mtd/maps/edb7312.c134
-rw-r--r--drivers/mtd/maps/gpio-addr-flash.c16
-rw-r--r--drivers/mtd/maps/h720x-flash.c23
-rw-r--r--drivers/mtd/maps/impa7.c28
-rw-r--r--drivers/mtd/maps/intel_vr_nor.c7
-rw-r--r--drivers/mtd/maps/ixp2000.c11
-rw-r--r--drivers/mtd/maps/ixp4xx.c29
-rw-r--r--drivers/mtd/maps/lantiq-flash.c17
-rw-r--r--drivers/mtd/maps/latch-addr-flash.c24
-rw-r--r--drivers/mtd/maps/pcmciamtd.c124
-rw-r--r--drivers/mtd/maps/physmap.c38
-rw-r--r--drivers/mtd/maps/physmap_of.c80
-rw-r--r--drivers/mtd/maps/plat-ram.c23
-rw-r--r--drivers/mtd/maps/pxa2xx-flash.c20
-rw-r--r--drivers/mtd/maps/rbtx4939-flash.c24
-rw-r--r--drivers/mtd/maps/sa1100-flash.c30
-rw-r--r--drivers/mtd/maps/solutionengine.c30
-rw-r--r--drivers/mtd/maps/wr_sbc82xx_flash.c33
-rw-r--r--drivers/mtd/mtd_blkdevs.c2
-rw-r--r--drivers/mtd/mtdblock.c18
-rw-r--r--drivers/mtd/mtdchar.c162
-rw-r--r--drivers/mtd/mtdconcat.c10
-rw-r--r--drivers/mtd/mtdcore.c70
-rw-r--r--drivers/mtd/mtdcore.h3
-rw-r--r--drivers/mtd/mtdoops.c2
-rw-r--r--drivers/mtd/mtdpart.c62
-rw-r--r--drivers/mtd/mtdsuper.c20
-rw-r--r--drivers/mtd/mtdswap.c31
-rw-r--r--drivers/mtd/nand/Kconfig29
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/atmel_nand.c74
-rw-r--r--drivers/mtd/nand/au1550nd.c29
-rw-r--r--drivers/mtd/nand/autcpu12.c4
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c57
-rw-r--r--drivers/mtd/nand/cafe_nand.c21
-rw-r--r--drivers/mtd/nand/cmx270_nand.c23
-rw-r--r--drivers/mtd/nand/cs553x_nand.c15
-rw-r--r--drivers/mtd/nand/davinci_nand.c39
-rw-r--r--drivers/mtd/nand/denali.c6
-rw-r--r--drivers/mtd/nand/diskonchip.c8
-rw-r--r--drivers/mtd/nand/edb7312.c203
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c75
-rw-r--r--drivers/mtd/nand/fsl_upm.c16
-rw-r--r--drivers/mtd/nand/fsmc_nand.c77
-rw-r--r--drivers/mtd/nand/gpmi-nand/Makefile3
-rw-r--r--drivers/mtd/nand/gpmi-nand/bch-regs.h84
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c1057
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c1619
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h273
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-regs.h172
-rw-r--r--drivers/mtd/nand/h1910.c19
-rw-r--r--drivers/mtd/nand/jz4740_nand.c18
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c22
-rw-r--r--drivers/mtd/nand/mxc_nand.c37
-rw-r--r--drivers/mtd/nand/nand_base.c1109
-rw-r--r--drivers/mtd/nand/nand_bbt.c692
-rw-r--r--drivers/mtd/nand/nand_bch.c4
-rw-r--r--drivers/mtd/nand/nand_ecc.c10
-rw-r--r--drivers/mtd/nand/nandsim.c4
-rw-r--r--drivers/mtd/nand/ndfc.c22
-rw-r--r--drivers/mtd/nand/nomadik_nand.c1
-rw-r--r--drivers/mtd/nand/nuc900_nand.c1
-rw-r--r--drivers/mtd/nand/omap2.c22
-rw-r--r--drivers/mtd/nand/orion_nand.c16
-rw-r--r--drivers/mtd/nand/pasemi_nand.c3
-rw-r--r--drivers/mtd/nand/plat_nand.c25
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c47
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c471
-rw-r--r--drivers/mtd/nand/r852.c6
-rw-r--r--drivers/mtd/nand/rtc_from4.c5
-rw-r--r--drivers/mtd/nand/s3c2410.c27
-rw-r--r--drivers/mtd/nand/sharpsl.c13
-rw-r--r--drivers/mtd/nand/sm_common.c2
-rw-r--r--drivers/mtd/nand/socrates_nand.c28
-rw-r--r--drivers/mtd/nand/tmio_nand.c17
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c8
-rw-r--r--drivers/mtd/nftlcore.c37
-rw-r--r--drivers/mtd/nftlmount.c26
-rw-r--r--drivers/mtd/ofpart.c112
-rw-r--r--drivers/mtd/onenand/generic.c14
-rw-r--r--drivers/mtd/onenand/omap2.c16
-rw-r--r--drivers/mtd/onenand/onenand_base.c114
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c8
-rw-r--r--drivers/mtd/onenand/samsung.c13
-rw-r--r--drivers/mtd/redboot.c16
-rw-r--r--drivers/mtd/sm_ftl.c26
-rw-r--r--drivers/mtd/ssfdc.c46
-rw-r--r--drivers/mtd/tests/mtd_oobtest.c33
-rw-r--r--drivers/mtd/tests/mtd_pagetest.c37
-rw-r--r--drivers/mtd/tests/mtd_readtest.c13
-rw-r--r--drivers/mtd/tests/mtd_speedtest.c17
-rw-r--r--drivers/mtd/tests/mtd_stresstest.c11
-rw-r--r--drivers/mtd/tests/mtd_subpagetest.c17
-rw-r--r--drivers/mtd/tests/mtd_torturetest.c11
-rw-r--r--drivers/mtd/ubi/eba.c2
-rw-r--r--drivers/mtd/ubi/io.c24
-rw-r--r--drivers/mtd/ubi/kapi.c2
-rw-r--r--drivers/mtd/ubi/misc.c2
-rw-r--r--drivers/mtd/ubi/scan.c4
-rw-r--r--drivers/mtd/ubi/vtbl.c2
-rw-r--r--drivers/staging/spectra/lld_mtd.c6
-rw-r--r--fs/jffs2/compr.c128
-rw-r--r--fs/jffs2/compr.h2
-rw-r--r--fs/jffs2/fs.c2
-rw-r--r--fs/jffs2/jffs2_fs_sb.h6
-rw-r--r--fs/jffs2/os-linux.h2
-rw-r--r--fs/jffs2/scan.c4
-rw-r--r--fs/jffs2/super.c119
-rw-r--r--fs/jffs2/wbuf.c9
-rw-r--r--include/linux/mtd/bbm.h39
-rw-r--r--include/linux/mtd/mtd.h82
-rw-r--r--include/linux/mtd/nand.h92
-rw-r--r--include/linux/mtd/onenand.h4
-rw-r--r--include/linux/mtd/partitions.h46
-rw-r--r--include/linux/mtd/physmap.h17
-rw-r--r--include/mtd/mtd-abi.h122
190 files changed, 7583 insertions, 4046 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 17910e2052ad..0c674be0d3c6 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</para>
<para>
The simplest way to activate the FLASH based bad block table support
- is to set the option NAND_USE_FLASH_BBT in the option field of
+ is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
the nand chip structure before calling nand_scan(). For AG-AND
chips is this done by default.
This activates the default FLASH based bad block table functionality
@@ -773,20 +773,6 @@ struct nand_oobinfo {
done according to the default builtin scheme.
</para>
</sect2>
- <sect2 id="User_space_placement_selection">
- <title>User space placement selection</title>
- <para>
- All non ecc functions like mtd->read and mtd->write use an internal
- structure, which can be set by an ioctl. This structure is preset
- to the autoplacement default.
- <programlisting>
- ioctl (fd, MEMSETOOBSEL, oobsel);
- </programlisting>
- oobsel is a pointer to a user supplied structure of type
- nand_oobconfig. The contents of this structure must match the
- criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
- </para>
- </sect2>
</sect1>
<sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
@@ -1158,9 +1144,6 @@ in this page</entry>
These constants are defined in nand.h. They are ored together to describe
the functionality.
<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT 0x00010000
/* The hw ecc generator provides a syndrome instead a ecc value on read
* This can only work if we have the ecc bytes directly behind the
* data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
new file mode 100644
index 000000000000..ef66ddd01da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
@@ -0,0 +1,14 @@
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+};
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 0487ea10c2d6..4282d96dffa8 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -130,19 +130,14 @@ static struct mtd_partition __initdata afeb9260_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
- return afeb9260_nand_partition;
-}
-
static struct atmel_nand_data __initdata afeb9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
.bus_width_16 = 0,
+ .parts = afeb9260_nand_partition,
+ .num_parts = ARRAY_SIZE(afeb9260_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 747b2eaa9737..f90cfb32bad2 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -132,19 +132,14 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cam60_nand_partition);
- return cam60_nand_partition;
-}
-
static struct atmel_nand_data __initdata cam60_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
- .partition_info = nand_partitions,
+ .parts = cam60_nand_partition,
+ .num_parts = ARRAY_SIZE(cam60_nand_partition),
};
static struct sam9_smc_config __initdata cam60_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 062670351a6a..5dffd3be62d2 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -169,19 +169,14 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
- return cap9adk_nand_partitions;
-}
-
static struct atmel_nand_data __initdata cap9adk_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
// .rdy_pin = ... not connected
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = cap9adk_nand_partitions,
+ .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
};
static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 15a3f1a87ab0..e61351ffad50 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -97,19 +97,14 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
- return kb9202_nand_partition;
-}
-
static struct atmel_nand_data __initdata kb9202_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
- .partition_info = nand_partitions,
+ .parts = kb9202_nand_partition,
+ .num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
static void __init kb9202_board_init(void)
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 6094496f7edb..ef816c17dc61 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -182,19 +182,14 @@ static struct mtd_partition __initdata neocore926_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(neocore926_nand_partition);
- return neocore926_nand_partition;
-}
-
static struct atmel_nand_data __initdata neocore926_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PB19,
.rdy_pin_active_low = 1,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = neocore926_nand_partition,
+ .num_parts = ARRAY_SIZE(neocore926_nand_partition),
};
static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 938cc390bea3..07421bdb88ea 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -130,19 +130,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index b4ac30e38a9e..80a8c9c6e922 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -138,19 +138,14 @@ static struct mtd_partition __initdata dk_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
static struct atmel_nand_data __initdata dk_nand_data = {
.ale = 22,
.cle = 21,
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
// .enable_pin = ... not there
- .partition_info = nand_partitions,
+ .parts = dk_nand_partition,
+ .num_parts = ARRAY_SIZE(dk_nand_partition),
};
#define DK_FLASH_BASE AT91_CHIPSELECT_0
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 2a21e790250e..072d53af98d9 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -131,19 +131,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 89c8b579bfda..4f10181a0782 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -173,19 +173,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 3741f43cdae9..b005b738e8ff 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -179,19 +179,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index a580dd451a41..bccdcf23caa1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -180,19 +180,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8d77c2ff96b2..64fc75c9d0ac 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -157,19 +157,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2d6203ac1a42..92de9127923a 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -137,19 +137,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 39a28effc3df..b2b748239f36 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -88,19 +88,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index c73d25e5faea..0df01c6e2d0c 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -97,18 +97,12 @@ static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
},
};
-static struct mtd_partition * __init
-snapper9260_nand_partition_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
- return snapper9260_nand_partitions;
-}
-
static struct atmel_nand_data __initdata snapper9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
- .partition_info = snapper9260_nand_partition_info,
+ .parts = snapper9260_nand_partitions,
+ .num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
.bus_width_16 = 0,
};
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 5852d3d9890c..0a20bab21f99 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -190,19 +190,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 3c288b396fc4..649b052231f5 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -172,19 +172,14 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
- return yl9200_nand_partition;
-}
-
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .partition_info = nand_partitions,
+ .parts = yl9200_nand_partition,
+ .num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
/*
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index d07767f4052e..eac92e995bb5 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -117,7 +117,8 @@ struct atmel_nand_data {
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 26d94c0b555c..11c3db985285 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
.timing = &da830_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index ec21663f8ddc..1d7d24995226 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -256,7 +256,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
};
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 65566280b7c9..4e0e707c313d 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b307470b071d..ff2d2413279a 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_nand_resources[] = {
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 04c43abcca66..1918ae711428 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 28fafa7819bc..0cf8abf78d33 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -151,7 +151,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 6efc84cceca0..3cfff555e8f2 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -396,7 +396,8 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+ .bbt_options = NAND_BBT_USE_FLASH,
+ .options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
};
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 38d6f644d8b9..e5f231aefee4 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_ntosd2_nandflash_resource[] = {
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 90ee7b5aabdc..f69e40a29e02 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = {
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 1,
};
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index 025151049f05..1cf555aef896 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -74,8 +74,10 @@ struct davinci_nand_pdata { /* platform_data */
nand_ecc_modes_t ecc_mode;
u8 ecc_bits;
- /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+ /* e.g. NAND_BUSWIDTH_16 */
unsigned options;
+ /* e.g. NAND_BBT_USE_FLASH */
+ unsigned bbt_options;
/* Main and mirror bbt descriptor overrides */
struct nand_bbt_descr *bbt_td;
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 1ade3c340507..8b2f1435bcac 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -116,8 +116,9 @@ static struct mtd_partition ts72xx_nand_parts[] = {
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Linux",
- .offset = MTDPART_OFS_APPEND,
- .size = 0, /* filled in later */
+ .offset = MTDPART_OFS_RETAIN,
+ .size = TS72XX_REDBOOT_PART_SIZE,
+ /* leave so much for last partition */
}, {
.name = "RedBoot",
.offset = MTDPART_OFS_APPEND,
@@ -126,28 +127,14 @@ static struct mtd_partition ts72xx_nand_parts[] = {
},
};
-static void ts72xx_nand_set_parts(uint64_t size,
- struct platform_nand_chip *chip)
-{
- /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
- if (size == SZ_32M || size == SZ_128M) {
- /* Set the "Linux" partition size */
- ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
-
- chip->partitions = ts72xx_nand_parts;
- chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
- } else {
- pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
- }
-}
-
static struct platform_nand_data ts72xx_nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.chip_delay = 15,
.part_probe_types = ts72xx_nand_part_probes,
- .set_parts = ts72xx_nand_set_parts,
+ .partitions = ts72xx_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts),
},
.ctrl = {
.cmd_ctrl = ts72xx_nand_hwcontrol,
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5ad774604..7a60bbbce7a4 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -167,8 +167,9 @@ static struct mtd_partition aspenite_nand_partitions[] = {
static struct pxa3xx_nand_platform_data aspenite_nand_info = {
.enable_arbiter = 1,
- .parts = aspenite_nand_partitions,
- .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = aspenite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
};
static struct i2c_board_info aspenite_i2c_info[] __initdata = {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6c75cd35c4c8..b35e2005a348 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -275,7 +275,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
},
.ctrl = {
/*
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3a7387f93c38..e096bba8fd57 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -424,8 +424,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = cm_x300_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = cm_x300_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
};
static void __init cm_x300_init_nand(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 3f9be419959d..2b8ca0de8a3d 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -139,8 +139,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
static struct pxa3xx_nand_platform_data colibri_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = colibri_nand_partitions,
- .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = colibri_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions),
};
void __init colibri_pxa3xx_init_nand(void)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0037e57e0cec..7b324ec6449f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -325,8 +325,9 @@ static struct mtd_partition littleton_nand_partitions[] = {
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
- .parts = littleton_nand_partitions,
- .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = littleton_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index b5a8fd3fce04..90928d6e1a5b 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -389,10 +389,11 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
};
static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
- .enable_arbiter = 1,
- .keep_config = 1,
- .parts = mxm_8x10_nand_partitions,
- .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .num_cs = 1,
+ .parts[0] = mxm_8x10_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions)
};
static void __init mxm_8x10_nand_init(void)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6810cddec927..f0c05f4d12ed 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -346,8 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = raumfeld_nand_partitions,
- .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = raumfeld_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions),
};
/**
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 31d496891891..6c39c3328418 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -366,8 +366,9 @@ static struct mtd_partition zylonite_nand_partitions[] = {
static struct pxa3xx_nand_platform_data zylonite_nand_info = {
.enable_arbiter = 1,
- .parts = zylonite_nand_partitions,
- .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = zylonite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions),
};
static void __init zylonite_init_nand(void)
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 442301fe48b4..c42f39f20195 100644
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
@@ -41,6 +41,19 @@ struct pxa3xx_nand_flash {
struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
};
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
struct pxa3xx_nand_platform_data {
/* the data flash bus is shared between the Static Memory
@@ -52,8 +65,11 @@ struct pxa3xx_nand_platform_data {
/* allow platform code to keep OBM/bootloader defined NFC config */
int keep_config;
- const struct mtd_partition *parts;
- unsigned int nr_parts;
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
const struct pxa3xx_nand_flash * flash;
size_t num_flash;
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index fafed4c38fd2..1f17bde52cd4 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.cle = 21,
@@ -102,7 +97,8 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 6ce30fb2ec94..4643ff5107c9 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -90,18 +90,13 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(num_partitions),
};
#endif
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 679458d9a622..5d7ffca7d69f 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -128,7 +128,8 @@ struct atmel_nand_data {
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index f58f2c1c5295..7fb52128ddc9 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index d5b0cc9f976b..e03238454b0e 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 66b616ebe536..318a869286ab 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -12,27 +12,17 @@ menuconfig MTD
if MTD
-config MTD_DEBUG
- bool "Debugging"
- help
- This turns on low-level debugging for the entire MTD sub-system.
- Normally, you should say 'N'.
-
-config MTD_DEBUG_VERBOSE
- int "Debugging verbosity (0 = quiet, 3 = noisy)"
- depends on MTD_DEBUG
- default "0"
- help
- Determines the verbosity level of the MTD debugging messages.
-
config MTD_TESTS
- tristate "MTD tests support"
+ tristate "MTD tests support (DANGEROUS)"
depends on m
help
This option includes various MTD tests into compilation. The tests
should normally be compiled as kernel modules. The modules perform
various checks and verifications when loaded.
+ WARNING: some of the tests will ERASE entire MTD device which they
+ test. Do not use these tests unless you really know what you do.
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
---help---
@@ -137,7 +127,8 @@ config MTD_AFS_PARTS
'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
config MTD_OF_PARTS
- def_bool y
+ tristate "OpenFirmware partitioning information support"
+ default Y
depends on OF
help
This provides a partition parsing function which derives
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 39664c4229ff..9aaac3ac89f3 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -5,8 +5,8 @@
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
-mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 302372c08b56..89a02f6f65dc 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -162,8 +162,8 @@ afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr)
}
static int parse_afs_partitions(struct mtd_info *mtd,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_partition *parts;
u_int mask, off, idx, sz;
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 95949b97de6a..f40ea4547554 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -47,7 +47,7 @@ struct ar7_bin_rec {
static int create_mtd_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_part_parser_data *data)
{
struct ar7_bin_rec header;
unsigned int offset;
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 23175edd5634..8d70895a58d6 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -145,8 +145,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
if (((major << 8) | minor) < 0x3131) {
/* CFI version 1.0 => don't trust bootloc */
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+ pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
map->name, cfi->mfr, cfi->id);
/* AFAICS all 29LV400 with a bottom boot block have a device ID
@@ -166,8 +165,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
* the 8-bit device ID.
*/
(cfi->mfr == CFI_MFR_MACRONIX)) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: Macronix MX29LV400C with bottom boot block"
+ pr_debug("%s: Macronix MX29LV400C with bottom boot block"
" detected\n", map->name);
extp->TopBottom = 2; /* bottom boot */
} else
@@ -178,8 +176,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
extp->TopBottom = 2; /* bottom boot */
}
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: AMD CFI PRI V%c.%c has no boot block field;"
+ pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;"
" deduced %s from Device ID\n", map->name, major, minor,
extp->TopBottom == 2 ? "bottom" : "top");
}
@@ -191,7 +188,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
if (cfi->cfiq->BufWriteTimeoutTyp) {
- DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
+ pr_debug("Using buffer write method\n" );
mtd->write = cfi_amdstd_write_buffers;
}
}
@@ -443,8 +440,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
mtd->writesize = 1;
mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): write buffer size %d\n",
- __func__, mtd->writebufsize);
+ pr_debug("MTD %s(): write buffer size %d\n", __func__,
+ mtd->writebufsize);
mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
@@ -1163,7 +1160,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
/*
@@ -1174,7 +1171,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
*/
oldd = map_read(map, adr);
if (map_word_equal(map, oldd, datum)) {
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+ pr_debug("MTD %s(): NOP\n",
__func__);
goto op_done;
}
@@ -1400,7 +1397,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
datum = map_word_load(map, buf);
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1587,7 +1584,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, chip->start );
XIP_INVAL_CACHED_RANGE(map, adr, map->size);
@@ -1675,7 +1672,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, adr );
XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1801,8 +1798,7 @@ static int do_atmel_lock(struct map_info *map, struct flchip *chip,
goto out_unlock;
chip->state = FL_LOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
@@ -1837,8 +1833,7 @@ static int do_atmel_unlock(struct map_info *map, struct flchip *chip,
goto out_unlock;
chip->state = FL_UNLOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h
index 5e3cc80128aa..89c6595454a5 100644
--- a/drivers/mtd/chips/fwh_lock.h
+++ b/drivers/mtd/chips/fwh_lock.h
@@ -34,8 +34,7 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip,
/* Refuse the operation if the we cannot look behind the chip */
if (chip->start < 0x400000) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+ pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
__func__, chip->start );
return -EIO;
}
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index ea832ea0e4aa..c443f527a53a 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1914,11 +1914,10 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
* (oh and incidentaly the jedec spec - 3.5.3.3) the reset
* sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
* 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
- * as they will ignore the writes and dont care what address
+ * as they will ignore the writes and don't care what address
* the F0 is written to */
if (cfi->addr_unlock1) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "reset unlock called %x %x \n",
+ pr_debug( "reset unlock called %x %x \n",
cfi->addr_unlock1,cfi->addr_unlock2);
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -1941,7 +1940,7 @@ static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int in
uint8_t uaddr;
if (!(jedec_table[index].devtypes & cfi->device_type)) {
- DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
+ pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
jedec_table[index].name, 4 * (1<<cfi->device_type));
return 0;
}
@@ -2021,7 +2020,7 @@ static inline int jedec_match( uint32_t base,
* there aren't.
*/
if (finfo->dev_id > 0xff) {
- DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+ pr_debug("%s(): ID is not 8bit\n",
__func__);
goto match_done;
}
@@ -2045,12 +2044,10 @@ static inline int jedec_match( uint32_t base,
}
/* the part size must fit in the memory window */
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+ pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
__func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
__func__, finfo->mfr_id, finfo->dev_id,
1 << finfo->dev_size );
goto match_done;
@@ -2061,13 +2058,12 @@ static inline int jedec_match( uint32_t base,
uaddr = finfo->uaddr;
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
__func__, cfi->addr_unlock1, cfi->addr_unlock2 );
if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
&& ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x did not match\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
__func__,
unlock_addrs[uaddr].addr1,
unlock_addrs[uaddr].addr2);
@@ -2083,15 +2079,13 @@ static inline int jedec_match( uint32_t base,
* FIXME - write a driver that takes all of the chip info as
* module parameters, doesn't probe but forces a load.
*/
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): check ID's disappear when not in ID mode\n",
+ pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
__func__ );
jedec_reset( base, map, cfi );
mfr = jedec_read_mfr( map, base, cfi );
id = jedec_read_id( map, base, cfi );
if ( mfr == cfi->mfr && id == cfi->id ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+ pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
"You might need to manually specify JEDEC parameters.\n",
__func__, cfi->mfr, cfi->id );
goto match_done;
@@ -2104,7 +2098,7 @@ static inline int jedec_match( uint32_t base,
* Put the device back in ID mode - only need to do this if we
* were truly frobbing a real device.
*/
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+ pr_debug("MTD %s(): return to ID mode\n", __func__ );
if (cfi->addr_unlock1) {
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -2167,13 +2161,11 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
cfi->mfr = jedec_read_mfr(map, base, cfi);
cfi->id = jedec_read_id(map, base, cfi);
- DEBUG(MTD_DEBUG_LEVEL3,
- "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+ pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
__func__, cfi->mfr, cfi->id,
cfi->addr_unlock1, cfi->addr_unlock2 );
if (!cfi_jedec_setup(map, cfi, i))
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 8cf667da2408..ddf9ec6d9168 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -189,10 +189,7 @@ static struct mtd_partition * newpart(char *s,
extra_mem_size;
parts = kzalloc(alloc_size, GFP_KERNEL);
if (!parts)
- {
- printk(KERN_ERR ERRP "out of memory\n");
return NULL;
- }
extra_mem = (unsigned char *)(parts + *num_parts);
}
/* enter this partition (offset will be calculated later if it is zero at this point) */
@@ -317,8 +314,8 @@ static int mtdpart_setup_real(char *s)
* the first one in the chain if a NULL mtd_id is passed in.
*/
static int parse_cmdline_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
unsigned long offset;
int i;
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35081ce77fbd..283d887f7825 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -249,6 +249,16 @@ config MTD_DOC2001PLUS
under "NAND Flash Device Drivers" (currently that driver does not
support all Millennium Plus devices).
+config MTD_DOCG3
+ tristate "M-Systems Disk-On-Chip G3"
+ ---help---
+ This provides an MTD device driver for the M-Systems DiskOnChip
+ G3 devices.
+
+ The driver provides access to G3 DiskOnChip, distributed by
+ M-Systems and now Sandisk. The support is very experimental,
+ and doesn't give access to any write operations.
+
config MTD_DOCPROBE
tristate
select MTD_DOCECC
@@ -268,8 +278,7 @@ config MTD_DOCPROBE_ADVANCED
config MTD_DOCPROBE_ADDRESS
hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
depends on MTD_DOCPROBE
- default "0x0000" if MTD_DOCPROBE_ADVANCED
- default "0" if !MTD_DOCPROBE_ADVANCED
+ default "0x0"
---help---
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index f3226b1d38fc..56c7cd462f11 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_MTD_DOC2000) += doc2000.o
obj-$(CONFIG_MTD_DOC2001) += doc2001.o
obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o
+obj-$(CONFIG_MTD_DOCG3) += docg3.o
obj-$(CONFIG_MTD_DOCPROBE) += docprobe.o
obj-$(CONFIG_MTD_DOCECC) += docecc.o
obj-$(CONFIG_MTD_SLRAM) += slram.o
@@ -17,3 +18,5 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
+
+CFLAGS_docg3.o += -I$(src) \ No newline at end of file
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index f7fbf6025ef2..e9fad9151219 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -82,8 +82,7 @@ static int _DoC_WaitReady(struct DiskOnChip *doc)
void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
@@ -92,7 +91,7 @@ static int _DoC_WaitReady(struct DiskOnChip *doc)
DoC_Delay(doc, 2);
if (time_after(jiffies, timeo)) {
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return -EIO;
}
udelay(1);
@@ -323,8 +322,7 @@ static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
/* Reset the chip */
if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (reset) for %d,%d returned true\n",
+ pr_debug("DoC_Command (reset) for %d,%d returned true\n",
floor, chip);
return 0;
}
@@ -332,8 +330,7 @@ static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
/* Read the NAND chip ID: 1. Send ReadID command */
if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (ReadID) for %d,%d returned true\n",
+ pr_debug("DoC_Command (ReadID) for %d,%d returned true\n",
floor, chip);
return 0;
}
@@ -699,7 +696,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
#ifdef ECC_DEBUG
printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC
+ /* Read the ECC syndrome through the DiskOnChip ECC
logic. These syndrome will be all ZERO when there
is no error */
for (i = 0; i < 6; i++) {
@@ -930,7 +927,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
@@ -1094,7 +1091,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
struct DiskOnChip *this = mtd->priv;
int ret;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
mutex_lock(&this->lock);
ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 241192f05bc8..a3f7a27499be 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -55,15 +55,14 @@ static int _DoC_WaitReady(void __iomem * docptr)
{
unsigned short c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
@@ -464,7 +463,7 @@ static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++) {
syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
@@ -632,7 +631,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
@@ -690,7 +689,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 09ae0adc3ad0..99351bc3e0ed 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -61,15 +61,14 @@ static int _DoC_WaitReady(void __iomem * docptr)
{
unsigned int c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
@@ -655,7 +654,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++)
syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
@@ -835,7 +834,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
@@ -920,7 +919,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index 37ef29a73ee4..4a1c39b6f37d 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -2,7 +2,7 @@
* ECC algorithm for M-systems disk on chip. We use the excellent Reed
* Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
* GNU GPL License. The rest is simply to convert the disk on chip
- * syndrom into a standard syndom.
+ * syndrome into a standard syndome.
*
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
* Copyright (C) 2000 Netgem S.A.
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
new file mode 100644
index 000000000000..bdcf5df982e8
--- /dev/null
+++ b/drivers/mtd/devices/docg3.c
@@ -0,0 +1,1114 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ * - block erase
+ * - page write
+ * - IPL write
+ * - ECC fixing (lack of BCH algorith understanding)
+ * - powerdown / powerup
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ * - a 1 byte Hamming code stored in the OOB for each page
+ * - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH part is only used for check purpose, no correction is available as
+ * some information is missing. What is known is that :
+ * - BCH is in GF(2^14)
+ * - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ * + 1 hamming byte)
+ * - BCH can correct up to 4 bits (t = 4)
+ * - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+ u8 val = readb(docg3->base + reg);
+
+ trace_docg3_io(0, 8, reg, (int)val);
+ return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+ u16 val = readw(docg3->base + reg);
+
+ trace_docg3_io(0, 16, reg, (int)val);
+ return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+ writeb(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+ writew(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+ doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+ doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+ doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+ u8 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readb(docg3, reg);
+ doc_vdbg("Read register %04x : %02x\n", reg, val);
+ return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+ u16 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readw(docg3, reg);
+ doc_vdbg("Read register %04x : %04x\n", reg, val);
+ return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+ int i;
+
+ doc_dbg("NOP x %d\n", nbNOPs);
+ for (i = 0; i < nbNOPs; i++)
+ doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+ int maxWaitCycles = 100;
+
+ do {
+ doc_delay(docg3, 4);
+ cpu_relax();
+ } while (!doc_is_ready(docg3) && maxWaitCycles--);
+ doc_delay(docg3, 2);
+ if (maxWaitCycles > 0)
+ return 0;
+ else
+ return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+ int ret;
+
+ doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+ doc_flash_sequence(docg3, DOC_SEQ_RESET);
+ doc_flash_command(docg3, DOC_CMD_RESET);
+ doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+
+ doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+ return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in
+ * @len: the lenght to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+ int first)
+{
+ int i, cdr, len4;
+ u16 data16, *dst16;
+ u8 data8, *dst8;
+
+ doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x3;
+ len4 = len - cdr;
+
+ if (first)
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ dst16 = buf;
+ for (i = 0; i < len4; i += 2) {
+ data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+ *dst16 = data16;
+ dst16++;
+ }
+
+ if (cdr) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_delay(docg3, 1);
+ dst8 = (u8 *)dst16;
+ for (i = 0; i < cdr; i++) {
+ data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+ *dst8 = data8;
+ dst8++;
+ }
+ }
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur. Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+ doc_dbg("doc_set_reliable_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_SET_MODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ * - RESET: all registers are zeroed
+ * - NORMAL: receives and handles commands
+ * - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+ int i;
+
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+
+ mode |= DOC_ASICMODE_MDWREN;
+ doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+ doc_writeb(docg3, mode, DOC_ASICMODE);
+ doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+ u8 ctrl;
+
+ doc_dbg("doc_set_device_id(%d)\n", id);
+ doc_writeb(docg3, id, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ ctrl &= ~DOC_CTRL_VIOLATION;
+ ctrl |= DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored. To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occured, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+ int fctrl;
+
+ doc_dbg("doc_set_extra_page_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+ doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+ doc_delay(docg3, 2);
+
+ fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+ return -EIO;
+ else
+ return 0;
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int wear, int ofs)
+{
+ int sector, ret = 0;
+
+ doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+ block0, block1, page, ofs, wear);
+
+ if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_set_reliable_mode(docg3);
+ if (wear)
+ ret = doc_set_extra_page_mode(docg3);
+ if (ret)
+ goto out;
+
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_sequence(docg3, DOC_SEQ_READ);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 2);
+
+out:
+ return ret;
+}
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ * - tell ASIC to map the flash pages
+ * - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ * - one read of 512 bytes at offset 0
+ * - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occured.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+ int page, int offset)
+{
+ int wear_area = 0, ret = 0;
+
+ doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+ block0, block1, page, offset);
+ if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+ wear_area = 1;
+ if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+ if (ret)
+ goto err;
+
+ doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+ doc_delay(docg3, 2);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+ doc_delay(docg3, 1);
+ if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+ offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+ doc_flash_address(docg3, offset >> 2);
+ doc_delay(docg3, 1);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+ return 0;
+err:
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+ int first)
+{
+ doc_read_data_area(docg3, buf, len, first);
+ doc_delay(docg3, 2);
+ return len;
+}
+
+/**
+ * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms
+ * @docg3: the device
+ * @syns: the array of 7 integers where the syndroms will be stored
+ */
+static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
+{
+ int i;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i));
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+ int *ofs)
+{
+ uint sector;
+
+ sector = from / DOC_LAYOUT_PAGE_SIZE;
+ *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES)
+ * DOC_LAYOUT_NBPLANES;
+ *block1 = *block0 + 1;
+ *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES);
+ *page /= DOC_LAYOUT_NBPLANES;
+ if (sector % 2)
+ *ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+ else
+ *ofs = 0;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, readlen, ret, ofs = 0;
+ int syn[DOC_ECC_BCH_SIZE], eccconf1;
+ u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+ ret = -EINVAL;
+ doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ goto err;
+ if (len % 4)
+ goto err;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ goto err;
+
+ *retlen = 0;
+ ret = 0;
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ while (!ret && len > 0) {
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+ if (ret < 0)
+ goto err;
+ ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES);
+ if (ret < 0)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, readlen, buf, 1);
+ if (ret < readlen)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ oob, 0);
+ if (ret < DOC_LAYOUT_OOB_SIZE)
+ goto err_in_read;
+
+ *retlen += readlen;
+ buf += readlen;
+ len -= readlen;
+
+ ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE;
+ if (ofs == 0)
+ page += 2;
+ if (page > DOC_ADDR_PAGE_MASK) {
+ page = 0;
+ block0 += 2;
+ block1 += 2;
+ }
+
+ /*
+ * There should be a BCH bitstream fixing algorithm here ...
+ * By now, a page read failure is triggered by BCH error
+ */
+ doc_get_hw_bch_syndroms(docg3, syn);
+ eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+ doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[0], oob[1], oob[2], oob[3], oob[4],
+ oob[5], oob[6]);
+ doc_dbg("OOB - HAMMING: %02x\n", oob[7]);
+ doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[8], oob[9], oob[10], oob[11], oob[12],
+ oob[13], oob[14]);
+ doc_dbg("OOB - UNUSED: %02x\n", oob[15]);
+ doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+ doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]);
+
+ ret = -EBADMSG;
+ if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) {
+ if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR)
+ goto err_in_read;
+ if (is_prot_seq_error(docg3))
+ goto err_in_read;
+ }
+ doc_read_page_finish(docg3);
+ }
+
+ return 0;
+err_in_read:
+ doc_read_page_finish(docg3);
+err:
+ return ret;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, ret;
+ u8 *buf = ops->oobbuf;
+ size_t len = ops->ooblen;
+
+ doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len);
+ if (len != DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ buf += ops->ooboffs;
+ break;
+ default:
+ break;
+ }
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret > 0)
+ ops->oobretlen = ret;
+ else
+ ops->oobretlen = 0;
+ return (ret > 0) ? 0 : ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+ int block = DOC_LAYOUT_BLOCK_BBT;
+ int ret = 0, nbpages, page;
+ u_char *buf = docg3->bbt;
+
+ nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+ for (page = 0; !ret && (page < nbpages); page++) {
+ ret = doc_read_page_prepare(docg3, block, block + 1,
+ page + DOC_LAYOUT_PAGE_BBT, 0);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3,
+ DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+ buf, 1);
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ }
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, is_good;
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+ from, block0, block1, page, ofs);
+
+ if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+ return 0;
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+ return !is_good;
+}
+
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+ u8 buf[DOC_LAYOUT_WEAR_SIZE];
+ int ret, plane1_erase_count, plane2_erase_count;
+ int block0, block1, page, ofs;
+
+ doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ return -EINVAL;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_reset_seq(docg3);
+ if (!ret)
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_WEAR_OFFSET);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+ return -EIO;
+ plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+ | ((u8)(~buf[5]) << 16);
+ plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+ | ((u8)(~buf[7]) << 16);
+
+ return max(plane1_erase_count, plane2_erase_count);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ pos += seq_printf(s,
+ "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+ fctrl,
+ fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+ fctrl & DOC_CTRL_CE ? "active" : "inactive",
+ fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+ fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+ fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+ return pos;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ int pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+ int mode = pctrl & 0x03;
+
+ pos += seq_printf(s,
+ "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+ pctrl,
+ pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+ pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+ pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+ mode >> 1, mode & 0x1);
+
+ switch (mode) {
+ case DOC_ASICMODE_RESET:
+ pos += seq_printf(s, "reset");
+ break;
+ case DOC_ASICMODE_NORMAL:
+ pos += seq_printf(s, "normal");
+ break;
+ case DOC_ASICMODE_POWERDOWN:
+ pos += seq_printf(s, "powerdown");
+ break;
+ }
+ pos += seq_printf(s, ")\n");
+ return pos;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int id = doc_register_readb(docg3, DOC_DEVICESELECT);
+
+ pos += seq_printf(s, "DeviceId = %d\n", id);
+ return pos;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int protect = doc_register_readb(docg3, DOC_PROTECTION);
+ int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
+ int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
+ int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
+ int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+
+ pos += seq_printf(s, "Protection = 0x%02x (",
+ protect);
+ if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+ pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+ if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+ pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+ if (protect & DOC_PROTECT_LOCK_INPUT)
+ pos += seq_printf(s, "LOCK_INPUT,");
+ if (protect & DOC_PROTECT_STICKY_LOCK)
+ pos += seq_printf(s, "STICKY_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+ pos += seq_printf(s, "PROTECTION ON,");
+ if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+ pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ERROR)
+ pos += seq_printf(s, "PROTECT_ERR,");
+ else
+ pos += seq_printf(s, "NO_PROTECT_ERR");
+ pos += seq_printf(s, ")\n");
+
+ pos += seq_printf(s, "DPS0 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps0, dps0_low, dps0_high,
+ !!(dps0 & DOC_DPS_OTP_PROTECTED),
+ !!(dps0 & DOC_DPS_READ_PROTECTED),
+ !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps0 & DOC_DPS_KEY_OK));
+ pos += seq_printf(s, "DPS1 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps1, dps1_low, dps1_high,
+ !!(dps1 & DOC_DPS_OTP_PROTECTED),
+ !!(dps1 & DOC_DPS_READ_PROTECTED),
+ !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps1 & DOC_DPS_KEY_OK));
+ return pos;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+ struct dentry *root, *entry;
+
+ root = debugfs_create_dir("docg3", NULL);
+ if (!root)
+ return -ENOMEM;
+
+ entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+ &flashcontrol_fops);
+ if (entry)
+ entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+ docg3, &asic_mode_fops);
+ if (entry)
+ entry = debugfs_create_file("device_id", S_IRUSR, root,
+ docg3, &device_id_fops);
+ if (entry)
+ entry = debugfs_create_file("protection", S_IRUSR, root,
+ docg3, &protection_fops);
+ if (entry) {
+ docg3->debugfs_root = root;
+ return 0;
+ } else {
+ debugfs_remove_recursive(root);
+ return -ENOMEM;
+ }
+}
+
+static void __exit doc_dbg_unregister(struct docg3 *docg3)
+{
+ debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int cfg;
+
+ cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+ docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ mtd->name = "DiskOnChip G3";
+ docg3->max_block = 2047;
+ break;
+ }
+ mtd->type = MTD_NANDFLASH;
+ /*
+ * Once write methods are added, the correct flags will be set.
+ * mtd->flags = MTD_CAP_NANDFLASH;
+ */
+ mtd->flags = MTD_CAP_ROM;
+ mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+ mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+ mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+ mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+ mtd->owner = THIS_MODULE;
+ mtd->erase = NULL;
+ mtd->point = NULL;
+ mtd->unpoint = NULL;
+ mtd->read = doc_read;
+ mtd->write = NULL;
+ mtd->read_oob = doc_read_oob;
+ mtd->write_oob = NULL;
+ mtd->sync = NULL;
+ mtd->block_isbad = doc_block_isbad;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct docg3 *docg3;
+ struct mtd_info *mtd;
+ struct resource *ress;
+ int ret, bbt_nbpages;
+ u16 chip_id, chip_id_inv;
+
+ ret = -ENOMEM;
+ docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+ if (!docg3)
+ goto nomem1;
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd)
+ goto nomem2;
+ mtd->priv = docg3;
+
+ ret = -ENXIO;
+ ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ress) {
+ dev_err(dev, "No I/O memory resource defined\n");
+ goto noress;
+ }
+ docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+
+ docg3->dev = &pdev->dev;
+ docg3->device_id = 0;
+ doc_set_device_id(docg3, docg3->device_id);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+ chip_id = doc_register_readw(docg3, DOC_CHIPID);
+ chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+ ret = -ENODEV;
+ if (chip_id != (u16)(~chip_id_inv)) {
+ doc_info("No device found at IO addr %p\n",
+ (void *)ress->start);
+ goto nochipfound;
+ }
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ doc_info("Found a G3 DiskOnChip at addr %p\n",
+ (void *)ress->start);
+ break;
+ default:
+ doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+ goto nochipfound;
+ }
+
+ doc_set_driver_info(chip_id, mtd);
+ platform_set_drvdata(pdev, mtd);
+
+ ret = -ENOMEM;
+ bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+ 8 * DOC_LAYOUT_PAGE_SIZE);
+ docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+ if (!docg3->bbt)
+ goto nochipfound;
+ doc_reload_bbt(docg3);
+
+ ret = mtd_device_parse_register(mtd, part_probes,
+ NULL, NULL, 0);
+ if (ret)
+ goto register_error;
+
+ doc_dbg_register(docg3);
+ return 0;
+
+register_error:
+ kfree(docg3->bbt);
+nochipfound:
+ iounmap(docg3->base);
+noress:
+ kfree(mtd);
+nomem2:
+ kfree(docg3);
+nomem1:
+ return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit docg3_release(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct docg3 *docg3 = mtd->priv;
+
+ doc_dbg_unregister(docg3);
+ mtd_device_unregister(mtd);
+ iounmap(docg3->base);
+ kfree(docg3->bbt);
+ kfree(docg3);
+ kfree(mtd);
+ return 0;
+}
+
+static struct platform_driver g3_driver = {
+ .driver = {
+ .name = "docg3",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(docg3_release),
+};
+
+static int __init docg3_init(void)
+{
+ return platform_driver_probe(&g3_driver, docg3_probe);
+}
+module_init(docg3_init);
+
+
+static void __exit docg3_exit(void)
+{
+ platform_driver_unregister(&g3_driver);
+}
+module_exit(docg3_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
new file mode 100644
index 000000000000..0d407be24594
--- /dev/null
+++ b/drivers/mtd/devices/docg3.h
@@ -0,0 +1,297 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+/*
+ * Flash memory areas :
+ * - 0x0000 .. 0x07ff : IPL
+ * - 0x0800 .. 0x0fff : Data area
+ * - 0x1000 .. 0x17ff : Registers
+ * - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL 0x0000
+#define DOC_IOSPACE_DATA 0x0800
+#define DOC_IOSPACE_SIZE 0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ * A page address for the block "b", plane "P" and page "p":
+ * address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK 0x3f
+#define DOC_ADDR_BLOCK_SHIFT 6
+#define DOC_LAYOUT_NBPLANES 2
+#define DOC_LAYOUT_PAGES_PER_BLOCK 64
+#define DOC_LAYOUT_PAGE_SIZE 512
+#define DOC_LAYOUT_OOB_SIZE 16
+#define DOC_LAYOUT_WEAR_SIZE 8
+#define DOC_LAYOUT_PAGE_OOB_SIZE \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE \
+ (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+#define DOC_ECC_BCH_SIZE 7
+#define DOC_ECC_BCH_COVERED_BYTES \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
+ DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT 0
+#define DOC_LAYOUT_BLOCK_OTP 0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
+
+#define DOC_LAYOUT_PAGE_BBT 4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
+#define DOC_LAYOUT_OOB_HAMMING_OFS 7
+#define DOC_LAYOUT_OOB_BCH_OFS 8
+#define DOC_LAYOUT_OOB_UNUSED_OFS 15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
+#define DOC_LAYOUT_OOB_HAMMING_SZ 1
+#define DOC_LAYOUT_OOB_BCH_SZ 7
+#define DOC_LAYOUT_OOB_UNUSED_SZ 1
+
+
+#define DOC_CHIPID_G3 0x200
+#define DOC_ERASE_MARK 0xaa
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID 0x1000
+#define DOC_TEST 0x1004
+#define DOC_BUSLOCK 0x1006
+#define DOC_ENDIANCONTROL 0x1008
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_CONFIGURATION 0x100e
+#define DOC_INTERRUPTCONTROL 0x1010
+#define DOC_READADDRESS 0x101a
+#define DOC_DATAEND 0x101e
+#define DOC_INTERRUPTSTATUS 0x1020
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_NOP 0x103e
+
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_ECCPRESET 0x1044
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1))
+
+#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_ADDRLOW 0x1060
+#define DOC_DPS0_ADDRHIGH 0x1062
+#define DOC_DPS1_ADDRLOW 0x1064
+#define DOC_DPS1_ADDRHIGH 0x1066
+#define DOC_DPS0_STATUS 0x106c
+#define DOC_DPS1_STATUS 0x106e
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET 0x00
+#define DOC_SEQ_PAGE_SIZE_532 0x03
+#define DOC_SEQ_SET_MODE 0x09
+#define DOC_SEQ_READ 0x12
+#define DOC_SEQ_SET_PLANE1 0x0e
+#define DOC_SEQ_SET_PLANE2 0x10
+#define DOC_SEQ_PAGE_SETUP 0x1d
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1 0x00
+#define DOC_CMD_SET_ADDR_READ 0x05
+#define DOC_CMD_READ_ALL_PLANES 0x30
+#define DOC_CMD_READ_PLANE2 0x50
+#define DOC_CMD_READ_FLASH 0xe0
+#define DOC_CMD_PAGE_SIZE_532 0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOC_CMD_PROG_CYCLE1 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_ERASECYCLE2 0xd0
+
+#define DOC_CMD_RELIABLE_MODE 0x22
+#define DOC_CMD_FAST_MODE 0xa2
+
+#define DOC_CMD_RESET 0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION 0x20
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN_BITS 0x08
+#define DOC_CTRL_PROTECTION_ERROR 0x04
+#define DOC_CTRL_SEQUENCE_ERROR 0x02
+#define DOC_CTRL_FLASHREADY 0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
+#define DOC_ECCCONF0_BCH_ENABLE 0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_UNKOWN1 0x40
+#define DOC_ECCCONF1_UNKOWN2 0x20
+#define DOC_ECCCONF1_UNKOWN3 0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
+#define DOC_PROTECT_LOCK_INPUT 0x04
+#define DOC_PROTECT_STICKY_LOCK 0x08
+#define DOC_PROTECT_PROTECTION_ENABLED 0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
+#define DOC_PROTECT_PROTECTION_ERROR 0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED 0x01
+#define DOC_DPS_READ_PROTECTED 0x02
+#define DOC_DPS_WRITE_PROTECTED 0x04
+#define DOC_DPS_HW_LOCK_ENABLED 0x08
+#define DOC_DPS_KEY_OK 0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG 0x80
+#define DOC_CONF_MAX_ID_MASK 0x30
+#define DOC_CONF_VCCQ_3V 0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC 0x8000
+#define DOC_READADDR_ONE_BYTE 0x4000
+#define DOC_READADDR_ADDR_MASK 0x1fff
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @base: mapped IO space
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+ * @bbt: bad block table cache
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+ struct device *dev;
+ void __iomem *base;
+ unsigned int device_id:4;
+ unsigned int if_cfg:1;
+ int max_block;
+ u8 *bbt;
+ struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+ static int name##_open(struct inode *inode, struct file *file) \
+ { return single_open(file, show_fct, inode->i_private); } \
+ static const struct file_operations name##_fops = { \
+ .owner = THIS_MODULE, \
+ .open = name##_open, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release \
+ };
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+ TP_PROTO(int op, int width, u16 reg, int val),
+ TP_ARGS(op, width, reg, val),
+ TP_STRUCT__entry(
+ __field(int, op)
+ __field(unsigned char, width)
+ __field(u16, reg)
+ __field(int, val)),
+ TP_fast_assign(
+ __entry->op = op;
+ __entry->width = width;
+ __entry->reg = reg;
+ __entry->val = val;),
+ TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+ __entry->op ? "write" : "read", __entry->width,
+ __entry->reg, __entry->val)
+ );
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d374603493a7..45116bb30297 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -50,11 +50,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
-#define CONFIG_MTD_DOCPROBE_ADDRESS 0
-#endif
-
static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
module_param(doc_config_location, ulong, 0);
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 772a0ff89e0f..3a11ea628e58 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -34,9 +34,6 @@
/* debugging */
//#define LART_DEBUG
-/* partition support */
-#define HAVE_PARTITIONS
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -44,9 +41,7 @@
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
#include <linux/mtd/partitions.h>
-#endif
#ifndef CONFIG_SA1100_LART
#error This is for LART architecture only
@@ -598,7 +593,6 @@ static struct mtd_erase_region_info erase_regions[] = {
}
};
-#ifdef HAVE_PARTITIONS
static struct mtd_partition lart_partitions[] = {
/* blob */
{
@@ -619,7 +613,7 @@ static struct mtd_partition lart_partitions[] = {
.size = INITRD_LEN, /* MTDPART_SIZ_FULL */
}
};
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
static int __init lart_flash_init (void)
{
@@ -668,7 +662,6 @@ static int __init lart_flash_init (void)
result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
result,mtd.eraseregions[result].numblocks);
-#ifdef HAVE_PARTITIONS
printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
@@ -681,25 +674,16 @@ static int __init lart_flash_init (void)
result,lart_partitions[result].offset,
result,lart_partitions[result].size,lart_partitions[result].size / 1024);
#endif
-#endif
-#ifndef HAVE_PARTITIONS
- result = mtd_device_register(&mtd, NULL, 0);
-#else
result = mtd_device_register(&mtd, lart_partitions,
ARRAY_SIZE(lart_partitions));
-#endif
return (result);
}
static void __exit lart_flash_exit (void)
{
-#ifndef HAVE_PARTITIONS
- mtd_device_unregister(&mtd);
-#else
mtd_device_unregister(&mtd);
-#endif
}
module_init (lart_flash_init);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35180e475c4c..884904d3f9d2 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -30,6 +30,7 @@
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of_platform.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
@@ -88,7 +89,6 @@ struct m25p {
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
- unsigned partitioned:1;
u16 page_size;
u16 addr_width;
u8 erase_opcode;
@@ -209,9 +209,8 @@ static int wait_till_ready(struct m25p *flash)
*/
static int erase_chip(struct m25p *flash)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %lldKiB\n",
- dev_name(&flash->spi->dev), __func__,
- (long long)(flash->mtd.size >> 10));
+ pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__,
+ (long long)(flash->mtd.size >> 10));
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
@@ -250,9 +249,8 @@ static int m25p_cmdsz(struct m25p *flash)
*/
static int erase_sector(struct m25p *flash, u32 offset)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
- dev_name(&flash->spi->dev), __func__,
- flash->mtd.erasesize / 1024, offset);
+ pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev),
+ __func__, flash->mtd.erasesize / 1024, offset);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
@@ -286,9 +284,9 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
u32 addr,len;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%llx, len %lld\n",
- dev_name(&flash->spi->dev), __func__, "at",
- (long long)instr->addr, (long long)instr->len);
+ pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev),
+ __func__, (long long)instr->addr,
+ (long long)instr->len);
/* sanity checks */
if (instr->addr + instr->len > flash->mtd.size)
@@ -348,9 +346,8 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "from",
- (u32)from, len);
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
/* sanity checks */
if (!len)
@@ -417,9 +414,8 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
@@ -510,9 +506,8 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t actual;
int cmd_sz, ret;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
@@ -661,6 +656,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
{ "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
{ "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
@@ -671,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = {
/* EON -- en25xxx */
{ "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
{ "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
/* Intel/Numonyx -- xxxs33b */
@@ -788,8 +785,8 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
*/
tmp = spi_write_then_read(spi, &code, 1, id, 5);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
+ pr_debug("%s: error %d reading JEDEC ID\n",
+ dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
jedec = id[0];
@@ -825,8 +822,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
struct m25p *flash;
struct flash_info *info;
unsigned i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
+ struct mtd_part_parser_data ppdata;
+
+#ifdef CONFIG_MTD_OF_PARTS
+ if (!of_device_is_available(spi->dev.of_node))
+ return -ENODEV;
+#endif
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
@@ -928,6 +929,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
+ ppdata.of_node = spi->dev.of_node;
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;
@@ -945,8 +947,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
@@ -955,8 +956,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
if (flash->mtd.numeraseregions)
for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+ pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, "
".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, (long long)flash->mtd.eraseregions[i].offset,
@@ -968,41 +968,9 @@ static int __devinit m25p_probe(struct spi_device *spi)
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[]
- = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes, &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (nr_parts <= 0 && spi->dev.of_node) {
- nr_parts = of_mtd_parse_partitions(&spi->dev,
- spi->dev.of_node, &parts);
- }
-#endif
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
- flash->partitioned = 1;
- }
-
- return mtd_device_register(&flash->mtd, parts, nr_parts) == 1 ?
- -ENODEV : 0;
+ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
}
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 13749d458a31..d75c7af18a63 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -17,6 +17,8 @@
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
@@ -24,7 +26,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-
/*
* DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
* each chip, which may be used for double buffered I/O; but this driver
@@ -98,6 +99,16 @@ struct dataflash {
struct mtd_info mtd;
};
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+ { .compatible = "atmel,at45", },
+ { .compatible = "atmel,dataflash", },
+ { /* sentinel */ }
+};
+#else
+#define dataflash_dt_ids NULL
+#endif
+
/* ......................................................................... */
/*
@@ -122,7 +133,7 @@ static int dataflash_waitready(struct spi_device *spi)
for (;;) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
+ pr_debug("%s: status %d?\n",
dev_name(&spi->dev), status);
status = 0;
}
@@ -149,7 +160,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
uint8_t *command;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
+ pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
dev_name(&spi->dev), (long long)instr->addr,
(long long)instr->len);
@@ -187,7 +198,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
command[2] = (uint8_t)(pageaddr >> 8);
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
+ pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
do_block ? "block" : "page",
command[0], command[1], command[2], command[3],
pageaddr);
@@ -238,8 +249,8 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
uint8_t *command;
int status;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
- dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
+ pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+ (unsigned)from, (unsigned)(from + len));
*retlen = 0;
@@ -255,7 +266,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
command = priv->command;
- DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
+ pr_debug("READ: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
spi_message_init(&msg);
@@ -287,7 +298,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
*retlen = msg.actual_length - 8;
status = 0;
} else
- DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
+ pr_debug("%s: read %x..%x --> %d\n",
dev_name(&priv->spi->dev),
(unsigned)from, (unsigned)(from + len),
status);
@@ -314,7 +325,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
int status = -EINVAL;
uint8_t *command;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
+ pr_debug("%s: write 0x%x..0x%x\n",
dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
*retlen = 0;
@@ -340,7 +351,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
mutex_lock(&priv->lock);
while (remaining > 0) {
- DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+ pr_debug("write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
/* REVISIT:
@@ -368,12 +379,12 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
+ pr_debug("TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
+ pr_debug("%s: xfer %u -> %d\n",
dev_name(&spi->dev), addr, status);
(void) dataflash_waitready(priv->spi);
@@ -386,7 +397,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = (addr & 0x000000FF);
- DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
+ pr_debug("PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
x[1].tx_buf = writebuf;
@@ -395,7 +406,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
status = spi_sync(spi, &msg);
spi_transfer_del(x + 1);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
+ pr_debug("%s: pgm %u/%u -> %d\n",
dev_name(&spi->dev), addr, writelen, status);
(void) dataflash_waitready(priv->spi);
@@ -410,12 +421,12 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
+ pr_debug("COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
+ pr_debug("%s: compare %u -> %d\n",
dev_name(&spi->dev), addr, status);
status = dataflash_waitready(priv->spi);
@@ -634,11 +645,10 @@ add_dataflash_otp(struct spi_device *spi, char *name,
{
struct dataflash *priv;
struct mtd_info *device;
+ struct mtd_part_parser_data ppdata;
struct flash_platform_data *pdata = spi->dev.platform_data;
char *otp_tag = "";
int err = 0;
- struct mtd_partition *parts;
- int nr_parts = 0;
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv)
@@ -677,28 +687,11 @@ add_dataflash_otp(struct spi_device *spi, char *name,
pagesize, otp_tag);
dev_set_drvdata(&spi->dev, priv);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(device, part_probes, &parts,
- 0);
- }
+ ppdata.of_node = spi->dev.of_node;
+ err = mtd_device_parse_register(device, NULL, &ppdata,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
- if (nr_parts <= 0 && pdata && pdata->parts) {
- parts = pdata->parts;
- nr_parts = pdata->nr_parts;
- }
-
- if (nr_parts > 0) {
- priv->partitioned = 1;
- err = mtd_device_register(device, parts, nr_parts);
- goto out;
- }
-
- if (mtd_device_register(device, NULL, 0) == 1)
- err = -ENODEV;
-
-out:
if (!err)
return 0;
@@ -787,7 +780,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
*/
tmp = spi_write_then_read(spi, &code, 1, id, 3);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+ pr_debug("%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
@@ -804,7 +797,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
tmp < ARRAY_SIZE(dataflash_data);
tmp++, info++) {
if (info->jedec_id == jedec) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+ pr_debug("%s: OTP, sector protect%s\n",
dev_name(&spi->dev),
(info->flags & SUP_POW2PS)
? ", binary pagesize" : ""
@@ -812,8 +805,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
return ERR_PTR(status);
}
@@ -878,7 +870,7 @@ static int __devinit dataflash_probe(struct spi_device *spi)
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
if (status == 0 || status == 0xff)
status = -ENODEV;
@@ -914,14 +906,14 @@ static int __devinit dataflash_probe(struct spi_device *spi)
break;
/* obsolete AT45DB1282 not (yet?) supported */
default:
- DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
- dev_name(&spi->dev), status & 0x3c);
+ pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+ status & 0x3c);
status = -ENODEV;
}
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
- dev_name(&spi->dev), status);
+ pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+ status);
return status;
}
@@ -931,7 +923,7 @@ static int __devexit dataflash_remove(struct spi_device *spi)
struct dataflash *flash = dev_get_drvdata(&spi->dev);
int status;
- DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
+ pr_debug("%s: remove\n", dev_name(&spi->dev));
status = mtd_device_unregister(&flash->mtd);
if (status == 0) {
@@ -946,6 +938,7 @@ static struct spi_driver dataflash_driver = {
.name = "mtd_dataflash",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = dataflash_dt_ids,
},
.probe = dataflash_probe,
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index 83e80c65d6e7..d38ef3bffe8d 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -52,8 +52,6 @@ struct sst25l_flash {
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
-
- int partitioned;
};
struct flash_info {
@@ -381,8 +379,6 @@ static int __devinit sst25l_probe(struct spi_device *spi)
struct sst25l_flash *flash;
struct flash_platform_data *data;
int ret, i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
flash_info = sst25l_match_device(spi);
if (!flash_info)
@@ -414,8 +410,7 @@ static int __devinit sst25l_probe(struct spi_device *spi)
dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
@@ -423,37 +418,10 @@ static int __devinit sst25l_probe(struct spi_device *spi)
flash->mtd.numeraseregions);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = {"cmdlinepart", NULL};
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes,
- &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
-
- flash->partitioned = 1;
- return mtd_device_register(&flash->mtd, parts,
- nr_parts);
- }
-
- ret = mtd_device_register(&flash->mtd, NULL, 0);
- if (ret == 1) {
+ ret = mtd_device_parse_register(&flash->mtd, NULL, 0,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (ret) {
kfree(flash);
dev_set_drvdata(&spi->dev, NULL);
return -ENODEV;
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 037b399df3f1..c7382bb686c6 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -339,7 +339,7 @@ static int erase_xfer(partition_t *part,
struct erase_info *erase;
xfer = &part->XferInfo[xfernum];
- DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
xfer->state = XFER_ERASING;
/* Is there a free erase slot? Always in MTD. */
@@ -415,7 +415,7 @@ static int prepare_xfer(partition_t *part, int i)
xfer = &part->XferInfo[i];
xfer->state = XFER_FAILED;
- DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
/* Write the transfer unit header */
header = part->header;
@@ -476,7 +476,7 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
eun = &part->EUNInfo[srcunit];
xfer = &part->XferInfo[xferunit];
- DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+ pr_debug("ftl_cs: copying block 0x%x to 0x%x\n",
eun->Offset, xfer->Offset);
@@ -598,7 +598,7 @@ static int copy_erase_unit(partition_t *part, uint16_t srcunit,
unit with the fewest erases, and usually pick the data unit with
the most deleted blocks. But with a small probability, pick the
oldest data unit instead. This means that we generally postpone
- the next reclaimation as long as possible, but shuffle static
+ the next reclamation as long as possible, but shuffle static
stuff around a bit for wear leveling.
======================================================================*/
@@ -609,8 +609,8 @@ static int reclaim_block(partition_t *part)
uint32_t best;
int queued, ret;
- DEBUG(0, "ftl_cs: reclaiming space...\n");
- DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+ pr_debug("ftl_cs: reclaiming space...\n");
+ pr_debug("NumTransferUnits == %x\n", part->header.NumTransferUnits);
/* Pick the least erased transfer unit */
best = 0xffffffff; xfer = 0xffff;
do {
@@ -618,22 +618,22 @@ static int reclaim_block(partition_t *part)
for (i = 0; i < part->header.NumTransferUnits; i++) {
int n=0;
if (part->XferInfo[i].state == XFER_UNKNOWN) {
- DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+ pr_debug("XferInfo[%d].state == XFER_UNKNOWN\n",i);
n=1;
erase_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_ERASING) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASING\n",i);
n=1;
queued = 1;
}
else if (part->XferInfo[i].state == XFER_ERASED) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASED\n",i);
n=1;
prepare_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_PREPARED) {
- DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_PREPARED\n",i);
n=1;
if (part->XferInfo[i].EraseCount <= best) {
best = part->XferInfo[i].EraseCount;
@@ -641,12 +641,12 @@ static int reclaim_block(partition_t *part)
}
}
if (!n)
- DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+ pr_debug("XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
}
if (xfer == 0xffff) {
if (queued) {
- DEBUG(1, "ftl_cs: waiting for transfer "
+ pr_debug("ftl_cs: waiting for transfer "
"unit to be prepared...\n");
if (part->mbd.mtd->sync)
part->mbd.mtd->sync(part->mbd.mtd);
@@ -656,7 +656,7 @@ static int reclaim_block(partition_t *part)
printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
else
- DEBUG(1, "ftl_cs: reclaim failed: no "
+ pr_debug("ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
return -EIO;
@@ -666,7 +666,7 @@ static int reclaim_block(partition_t *part)
eun = 0;
if ((jiffies % shuffle_freq) == 0) {
- DEBUG(1, "ftl_cs: recycling freshest block...\n");
+ pr_debug("ftl_cs: recycling freshest block...\n");
best = 0xffffffff;
for (i = 0; i < part->DataUnits; i++)
if (part->EUNInfo[i].EraseCount <= best) {
@@ -686,7 +686,7 @@ static int reclaim_block(partition_t *part)
printk(KERN_NOTICE "ftl_cs: reclaim failed: "
"no free blocks!\n");
else
- DEBUG(1,"ftl_cs: reclaim failed: "
+ pr_debug("ftl_cs: reclaim failed: "
"no free blocks!\n");
return -EIO;
@@ -771,7 +771,7 @@ static uint32_t find_free(partition_t *part)
printk(KERN_NOTICE "ftl_cs: bad free list!\n");
return 0;
}
- DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+ pr_debug("ftl_cs: found free block at %d in %d\n", blk, eun);
return blk;
} /* find_free */
@@ -791,7 +791,7 @@ static int ftl_read(partition_t *part, caddr_t buffer,
int ret;
size_t offset, retlen;
- DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+ pr_debug("ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -840,7 +840,7 @@ static int set_bam_entry(partition_t *part, uint32_t log_addr,
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+ pr_debug("ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
part, log_addr, virt_addr);
bsize = 1 << part->header.EraseUnitSize;
eun = log_addr / bsize;
@@ -905,7 +905,7 @@ static int ftl_write(partition_t *part, caddr_t buffer,
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+ pr_debug("ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -1011,7 +1011,7 @@ static int ftl_discardsect(struct mtd_blktrans_dev *dev,
partition_t *part = (void *)dev;
uint32_t bsize = 1 << part->header.EraseUnitSize;
- DEBUG(1, "FTL erase sector %ld for %d sectors\n",
+ pr_debug("FTL erase sector %ld for %d sectors\n",
sector, nr_sects);
while (nr_sects) {
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index d7592e67d048..dd034efd1875 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -63,14 +63,12 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
return;
}
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("INFTL: add_mtd for %s\n", mtd->name);
inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
- if (!inftl) {
- printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+ if (!inftl)
return;
- }
inftl->mbd.mtd = mtd;
inftl->mbd.devnum = -1;
@@ -133,7 +131,7 @@ static void inftl_remove_dev(struct mtd_blktrans_dev *dev)
{
struct INFTLrecord *inftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("INFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
@@ -154,7 +152,7 @@ int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
@@ -174,7 +172,7 @@ int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
@@ -194,7 +192,7 @@ static int inftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
@@ -215,16 +213,16 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate)
u16 pot = inftl->LastFreeEUN;
int silly = inftl->nb_blocks;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
- "desperate=%d)\n", inftl, desperate);
+ pr_debug("INFTL: INFTL_findfreeblock(inftl=%p,desperate=%d)\n",
+ inftl, desperate);
/*
* Normally, we force a fold to happen before we run out of free
* blocks completely.
*/
if (!desperate && inftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
- "EUNs (%d)\n", inftl->numfreeEUNs);
+ pr_debug("INFTL: there are too few free EUNs (%d)\n",
+ inftl->numfreeEUNs);
return BLOCK_NIL;
}
@@ -259,8 +257,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
struct inftl_oob oob;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
- "pending=%d)\n", inftl, thisVUC, pendingblock);
+ pr_debug("INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,pending=%d)\n",
+ inftl, thisVUC, pendingblock);
memset(BlockMap, 0xff, sizeof(BlockMap));
memset(BlockDeleted, 0, sizeof(BlockDeleted));
@@ -323,8 +321,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
* Chain, and the Erase Unit into which we are supposed to be copying.
* Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
- thisVUC, targetEUN);
+ pr_debug("INFTL: folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
unsigned char movebuf[SECTORSIZE];
@@ -349,14 +346,13 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE, &retlen,
movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd,
(inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE,
&retlen, movebuf);
if (ret != -EIO)
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
- "away on retry?\n");
+ pr_debug("INFTL: error went away on retry?\n");
}
memset(&oob, 0xff, sizeof(struct inftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
@@ -372,8 +368,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned
* is important, by doing oldest first if we crash/reboot then it
* it is relatively simple to clean up the mess).
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
- thisVUC);
+ pr_debug("INFTL: want to erase virtual chain %d\n", thisVUC);
for (;;) {
/* Find oldest unit in chain. */
@@ -421,7 +416,7 @@ static u16 INFTL_makefreeblock(struct INFTLrecord *inftl, unsigned pendingblock)
u16 ChainLength = 0, thislen;
u16 chain, EUN;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_makefreeblock(inftl=%p,"
"pending=%d)\n", inftl, pendingblock);
for (chain = 0; chain < inftl->nb_blocks; chain++) {
@@ -484,8 +479,8 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
size_t retlen;
int silly, silly2 = 3;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_findwriteunit(inftl=%p,block=%d)\n",
+ inftl, block);
do {
/*
@@ -501,8 +496,8 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block)
blockofs, 8, &retlen, (char *)&bci);
status = bci.Status | bci.Status1;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
- "EUN %d is %x\n", block , writeEUN, status);
+ pr_debug("INFTL: status of block %d in EUN %d is %x\n",
+ block , writeEUN, status);
switch(status) {
case SECTOR_FREE:
@@ -555,9 +550,9 @@ hitused:
* Hopefully we free something, lets try again.
* This time we are desperate...
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
- "to find free EUN to accommodate write to "
- "VUC %d\n", thisVUC);
+ pr_debug("INFTL: using desperate==1 to find free EUN "
+ "to accommodate write to VUC %d\n",
+ thisVUC);
writeEUN = INFTL_findfreeblock(inftl, 1);
if (writeEUN == BLOCK_NIL) {
/*
@@ -647,7 +642,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+ pr_debug("INFTL: INFTL_trydeletechain(inftl=%p,"
"thisVUC=%d)\n", inftl, thisVUC);
memset(BlockUsed, 0, sizeof(BlockUsed));
@@ -711,7 +706,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
* For each block in the chain free it and make it available
* for future use. Erase from the oldest unit first.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+ pr_debug("INFTL: deleting empty VUC %d\n", thisVUC);
for (;;) {
u16 *prevEUN = &inftl->VUtable[thisVUC];
@@ -719,7 +714,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
/* If the chain is all gone already, we're done */
if (thisEUN == BLOCK_NIL) {
- DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+ pr_debug("INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
return;
}
@@ -731,7 +726,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC)
thisEUN = *prevEUN;
}
- DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+ pr_debug("Deleting EUN %d from VUC %d\n",
thisEUN, thisVUC);
if (INFTL_formatblock(inftl, thisEUN) < 0) {
@@ -767,7 +762,7 @@ static int INFTL_deleteblock(struct INFTLrecord *inftl, unsigned block)
size_t retlen;
struct inftl_bci bci;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_deleteblock(inftl=%p,"
"block=%d)\n", inftl, block);
while (thisEUN < inftl->nb_blocks) {
@@ -826,7 +821,7 @@ static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
struct inftl_oob oob;
char *p, *pend;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_writeblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
/* Is block all zero? */
@@ -876,7 +871,7 @@ static int inftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_readblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
while (thisEUN < inftl->nb_blocks) {
@@ -922,7 +917,7 @@ foundit:
int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
/* Handle corrected bit flips gracefully */
- if (ret < 0 && ret != -EUCLEAN)
+ if (ret < 0 && !mtd_is_bitflip(ret))
return -EIO;
}
return 0;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 104052e774b0..2ff601f816ce 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -53,7 +53,7 @@ static int find_boot_record(struct INFTLrecord *inftl)
struct INFTLPartition *ip;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+ pr_debug("INFTL: find_boot_record(inftl=%p)\n", inftl);
/*
* Assume logical EraseSize == physical erasesize for starting the
@@ -139,24 +139,20 @@ static int find_boot_record(struct INFTLrecord *inftl)
mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk("INFTL: Media Header ->\n"
- " bootRecordID = %s\n"
- " NoOfBootImageBlocks = %d\n"
- " NoOfBinaryPartitions = %d\n"
- " NoOfBDTLPartitions = %d\n"
- " BlockMultiplerBits = %d\n"
- " FormatFlgs = %d\n"
- " OsakVersion = 0x%x\n"
- " PercentUsed = %d\n",
- mh->bootRecordID, mh->NoOfBootImageBlocks,
- mh->NoOfBinaryPartitions,
- mh->NoOfBDTLPartitions,
- mh->BlockMultiplierBits, mh->FormatFlags,
- mh->OsakVersion, mh->PercentUsed);
- }
-#endif
+ pr_debug("INFTL: Media Header ->\n"
+ " bootRecordID = %s\n"
+ " NoOfBootImageBlocks = %d\n"
+ " NoOfBinaryPartitions = %d\n"
+ " NoOfBDTLPartitions = %d\n"
+ " BlockMultiplerBits = %d\n"
+ " FormatFlgs = %d\n"
+ " OsakVersion = 0x%x\n"
+ " PercentUsed = %d\n",
+ mh->bootRecordID, mh->NoOfBootImageBlocks,
+ mh->NoOfBinaryPartitions,
+ mh->NoOfBDTLPartitions,
+ mh->BlockMultiplierBits, mh->FormatFlags,
+ mh->OsakVersion, mh->PercentUsed);
if (mh->NoOfBDTLPartitions == 0) {
printk(KERN_WARNING "INFTL: Media Header sanity check "
@@ -200,19 +196,15 @@ static int find_boot_record(struct INFTLrecord *inftl)
ip->spareUnits = le32_to_cpu(ip->spareUnits);
ip->Reserved0 = le32_to_cpu(ip->Reserved0);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk(" PARTITION[%d] ->\n"
- " virtualUnits = %d\n"
- " firstUnit = %d\n"
- " lastUnit = %d\n"
- " flags = 0x%x\n"
- " spareUnits = %d\n",
- i, ip->virtualUnits, ip->firstUnit,
- ip->lastUnit, ip->flags,
- ip->spareUnits);
- }
-#endif
+ pr_debug(" PARTITION[%d] ->\n"
+ " virtualUnits = %d\n"
+ " firstUnit = %d\n"
+ " lastUnit = %d\n"
+ " flags = 0x%x\n"
+ " spareUnits = %d\n",
+ i, ip->virtualUnits, ip->firstUnit,
+ ip->lastUnit, ip->flags,
+ ip->spareUnits);
if (ip->Reserved0 != ip->firstUnit) {
struct erase_info *instr = &inftl->instr;
@@ -375,7 +367,7 @@ static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address,
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int INFTL_formatblock(struct INFTLrecord *inftl, int block)
{
@@ -385,8 +377,7 @@ int INFTL_formatblock(struct INFTLrecord *inftl, int block)
struct mtd_info *mtd = inftl->mbd.mtd;
int physblock;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_formatblock(inftl=%p,block=%d)\n", inftl, block);
memset(instr, 0, sizeof(struct erase_info));
@@ -476,30 +467,30 @@ void INFTL_dumptables(struct INFTLrecord *s)
{
int i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("VUtable[%d] ->", s->nb_blocks);
+ pr_debug("VUtable[%d] ->", s->nb_blocks);
for (i = 0; i < s->nb_blocks; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->VUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->VUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+ pr_debug("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
for (i = 0; i <= s->lastEUN; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->PUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->PUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("INFTL ->\n"
+ pr_debug("INFTL ->\n"
" EraseSize = %d\n"
" h/s/c = %d/%d/%d\n"
" numvunits = %d\n"
@@ -513,7 +504,7 @@ void INFTL_dumptables(struct INFTLrecord *s)
s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
}
@@ -521,25 +512,25 @@ void INFTL_dumpVUchains(struct INFTLrecord *s)
{
int logical, block, i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("INFTL Virtual Unit Chains:\n");
+ pr_debug("INFTL Virtual Unit Chains:\n");
for (logical = 0; logical < s->nb_blocks; logical++) {
block = s->VUtable[logical];
if (block > s->nb_blocks)
continue;
- printk(" LOGICAL %d --> %d ", logical, block);
+ pr_debug(" LOGICAL %d --> %d ", logical, block);
for (i = 0; i < s->nb_blocks; i++) {
if (s->PUtable[block] == BLOCK_NIL)
break;
block = s->PUtable[block];
- printk("%d ", block);
+ pr_debug("%d ", block);
}
- printk("\n");
+ pr_debug("\n");
}
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
}
@@ -555,7 +546,7 @@ int INFTL_mount(struct INFTLrecord *s)
int i;
u8 *ANACtable, ANAC;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+ pr_debug("INFTL: INFTL_mount(inftl=%p)\n", s);
/* Search for INFTL MediaHeader and Spare INFTL Media Header */
if (find_boot_record(s) < 0) {
@@ -585,7 +576,7 @@ int INFTL_mount(struct INFTLrecord *s)
* NOTEXPLORED state. Then at the end we will try to format it and
* mark it as free.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+ pr_debug("INFTL: pass 1, explore each unit\n");
for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
continue;
@@ -717,17 +708,14 @@ int INFTL_mount(struct INFTLrecord *s)
logical_block = BLOCK_NIL;
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
-#endif
+ INFTL_dumptables(s);
/*
* Second pass, check for infinite loops in chains. These are
* possible because we don't update the previous pointers when
* we fold chains. No big deal, just fix them up in PUtable.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+ pr_debug("INFTL: pass 2, validate virtual chains\n");
for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
block = s->VUtable[logical_block];
last_block = BLOCK_NIL;
@@ -772,12 +760,8 @@ int INFTL_mount(struct INFTLrecord *s)
}
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumpVUchains(s);
-#endif
+ INFTL_dumptables(s);
+ INFTL_dumpVUchains(s);
/*
* Third pass, format unreferenced blocks and init free block count.
@@ -785,7 +769,7 @@ int INFTL_mount(struct INFTLrecord *s)
s->numfreeEUNs = 0;
s->LastFreeEUN = BLOCK_NIL;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+ pr_debug("INFTL: pass 3, format unused blocks\n");
for (block = s->firstEUN; block <= s->lastEUN; block++) {
if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
printk("INFTL: unreferenced block %d, formatting it\n",
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index c0c328c5b133..8e0c4bf9f7fb 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -41,8 +41,6 @@ config MTD_PHYSMAP_START
are mapped on your particular target board. Refer to the
memory map which should hopefully be in the documentation for
your board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_LEN
hex "Physical length of flash mapping"
@@ -55,8 +53,6 @@ config MTD_PHYSMAP_LEN
than the total amount of flash present. Refer to the memory
map which should hopefully be in the documentation for your
board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_BANKWIDTH
int "Bank width in octets"
@@ -67,8 +63,6 @@ config MTD_PHYSMAP_BANKWIDTH
in octets. For example, if you have a data bus width of 32
bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
@@ -260,7 +254,6 @@ config MTD_BCM963XX
config MTD_LANTIQ
tristate "Lantiq SoC NOR support"
depends on LANTIQ
- select MTD_PARTITIONS
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
@@ -339,10 +332,6 @@ config MTD_SOLUTIONENGINE
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
-config MTD_ARM_INTEGRATOR
- tristate "CFI Flash device mapped on ARM Integrator/P720T"
- depends on ARM && MTD_CFI
-
config MTD_CDB89712
tristate "Cirrus CDB89712 evaluation board mappings"
depends on MTD_CFI && ARCH_CDB89712
@@ -398,13 +387,6 @@ config MTD_AUTCPU12
This enables access to the NV-RAM on autronix autcpu12 board.
If you have such a board, say 'Y'.
-config MTD_EDB7312
- tristate "CFI Flash device mapped on EDB7312"
- depends on ARCH_EDB7312 && MTD_CFI
- help
- This enables access to the CFI Flash on the Cogent EDB7312 board.
- If you have such a board, say 'Y' here.
-
config MTD_IMPA7
tristate "JEDEC Flash device mapped on impA7"
depends on ARM && MTD_JEDECPROBE
@@ -412,14 +394,6 @@ config MTD_IMPA7
This enables access to the NOR Flash on the impA7 board of
implementa GmbH. If you have such a board, say 'Y' here.
-config MTD_CEIVA
- tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
- depends on MTD_JEDECPROBE && ARCH_CEIVA
- help
- This enables access to the flash chips on the Ceiva/Polaroid
- PhotoMax Digital Picture Frame.
- If you have such a device, say 'Y'.
-
config MTD_H720X
tristate "Hynix evaluation board mappings"
depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index cb48b11affff..45dcb8b14f22 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
obj-$(CONFIG_MTD_MBX860) += mbx860.o
-obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
@@ -40,7 +39,6 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
-obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 67815eed2f00..6d6b2b5674ee 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -41,7 +41,6 @@ struct async_state {
uint32_t flash_ambctl0, flash_ambctl1;
uint32_t save_ambctl0, save_ambctl1;
unsigned long irq_flags;
- struct mtd_partition *parts;
};
static void switch_to_flash(struct async_state *state)
@@ -165,18 +164,8 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
return -ENXIO;
}
- ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
- if (ret > 0) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, ret);
- state->parts = pdata->parts;
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, pdata->nr_parts);
- } else {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
- mtd_device_register(state->mtd, NULL, 0);
- }
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, state);
@@ -188,7 +177,6 @@ static int __devexit bfin_flash_remove(struct platform_device *pdev)
struct async_state *state = platform_get_drvdata(pdev);
gpio_free(state->enet_flash_pin);
mtd_device_unregister(state->mtd);
- kfree(state->parts);
map_destroy(state->mtd);
kfree(state);
return 0;
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
deleted file mode 100644
index 06f9c9815720..000000000000
--- a/drivers/mtd/maps/ceiva.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- * 1. The flash size given should be the largest flash size that can
- * be accommodated.
- *
- * 2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB (16)
-#define PARAMS_PARTITION_SIZE_KiB (8)
-#define KERNEL_PARTITION_SIZE_KiB (4*128)
-/* Use both remaining portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
- {
- .name = "Ceiva BOOT partition",
- .size = BOOT_PARTITION_SIZE_KiB*1024,
- .offset = 0,
-
- },{
- .name = "Ceiva parameters partition",
- .size = PARAMS_PARTITION_SIZE_KiB*1024,
- .offset = (16 + 8) * 1024,
- },{
- .name = "Ceiva kernel partition",
- .size = (KERNEL_PARTITION_SIZE_KiB)*1024,
- .offset = 0x20000,
-
- },{
- .name = "Ceiva root filesystem partition",
- .offset = MTDPART_OFS_APPEND,
- .size = (ROOT_PARTITION_SIZE_KiB)*1024,
- }
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
- int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- *parts = ceiva_partitions;
- nb_parts = ARRAY_SIZE(ceiva_partitions);
- }
-#endif
- return nb_parts;
-}
-#endif
-
-struct clps_info {
- unsigned long base;
- unsigned long size;
- int width;
- void *vbase;
- struct map_info *map;
- struct mtd_info *mtd;
- struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
- struct mtd_info *subdev[nr];
- struct map_info *maps;
- int i, found = 0, ret = 0;
-
- /*
- * Allocate the map_info structs in one go.
- */
- maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
- if (!maps)
- return -ENOMEM;
- /*
- * Claim and then map the memory regions.
- */
- for (i = 0; i < nr; i++) {
- if (clps[i].base == (unsigned long)-1)
- break;
-
- clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
- if (!clps[i].res) {
- ret = -EBUSY;
- break;
- }
-
- clps[i].map = maps + i;
-
- clps[i].map->name = "clps flash";
- clps[i].map->phys = clps[i].base;
-
- clps[i].vbase = ioremap(clps[i].base, clps[i].size);
- if (!clps[i].vbase) {
- ret = -ENOMEM;
- break;
- }
-
- clps[i].map->virt = (void __iomem *)clps[i].vbase;
- clps[i].map->bankwidth = clps[i].width;
- clps[i].map->size = clps[i].size;
-
- simple_map_init(&clps[i].map);
-
- clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
- if (clps[i].mtd == NULL) {
- ret = -ENXIO;
- break;
- }
- clps[i].mtd->owner = THIS_MODULE;
- subdev[i] = clps[i].mtd;
-
- printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
- "%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
- clps[i].width * 8);
- found += 1;
- }
-
- /*
- * ENXIO is special. It means we didn't find a chip when
- * we probed. We need to tear down the mapping, free the
- * resource and mark it as such.
- */
- if (ret == -ENXIO) {
- iounmap(clps[i].vbase);
- clps[i].vbase = NULL;
- release_resource(clps[i].res);
- clps[i].res = NULL;
- }
-
- /*
- * If we found one device, don't bother with concat support.
- * If we found multiple devices, use concat if we have it
- * available, otherwise fail.
- */
- if (ret == 0 || ret == -ENXIO) {
- if (found == 1) {
- *rmtd = subdev[0];
- ret = 0;
- } else if (found > 1) {
- /*
- * We detected multiple devices. Concatenate
- * them together.
- */
- *rmtd = mtd_concat_create(subdev, found,
- "clps flash");
- if (*rmtd == NULL)
- ret = -ENXIO;
- }
- }
-
- /*
- * If we failed, clean up.
- */
- if (ret) {
- do {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- } while (i--);
-
- kfree(maps);
- }
-
- return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
- int i;
-
- mtd_device_unregister(mtd);
-
- if (mtd != clps[0].mtd)
- mtd_concat_destroy(mtd);
-
- for (i = NR_SUBMTD; i >= 0; i--) {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- }
- kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
- int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- info[0].base = CS0_PHYS_BASE;
- info[0].size = SZ_32M;
- info[0].width = CEIVA_FLASH_WIDTH;
- info[1].base = CS1_PHYS_BASE;
- info[1].size = SZ_32M;
- info[1].width = CEIVA_FLASH_WIDTH;
- nr = 2;
- }
-#endif
- return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
- const char *part_type = NULL;
- int nr_parts = 0;
- do {
- /*
- * Partition selection stuff.
- */
- nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
- if (nr_parts > 0) {
- part_type = "command line";
- break;
- }
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
- nr_parts = clps_static_partitions(&parsed_parts);
- if (nr_parts > 0) {
- part_type = "static";
- break;
- }
- printk("found: %d partitions\n", nr_parts);
-#endif
- } while (0);
-
- if (nr_parts == 0) {
- printk(KERN_NOTICE "clps flash: no partition info "
- "available, registering whole flash\n");
- mtd_device_register(mtd, NULL, 0);
- } else {
- printk(KERN_NOTICE "clps flash: using %s partition "
- "definition\n", part_type);
- mtd_device_register(mtd, parsed_parts, nr_parts);
- }
-
- /* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
- kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
- int ret;
- int nr;
-
- nr = clps_setup_flash();
- if (nr < 0)
- return nr;
-
- ret = clps_setup_mtd(info, nr, &mymtd);
- if (ret)
- return ret;
-
- clps_locate_partitions(mymtd);
-
- return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
- clps_destroy_mtd(info, mymtd);
- clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 7a9e1989c977..f43b365b848c 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -145,14 +145,10 @@ static struct map_info dc21285_map = {
/* Partition stuff */
-static struct mtd_partition *dc21285_parts;
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
static int __init init_dc21285(void)
{
-
- int nrparts;
-
/* Determine bankwidth */
switch (*CSR_SA110_CNTL & (3<<14)) {
case SA110_CNTL_ROMWIDTH_8:
@@ -200,8 +196,7 @@ static int __init init_dc21285(void)
dc21285_mtd->owner = THIS_MODULE;
- nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
- mtd_device_register(dc21285_mtd, dc21285_parts, nrparts);
+ mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0);
if(machine_is_ebsa285()) {
/*
@@ -224,8 +219,6 @@ static int __init init_dc21285(void)
static void __exit cleanup_dc21285(void)
{
mtd_device_unregister(dc21285_mtd);
- if (dc21285_parts)
- kfree(dc21285_parts);
map_destroy(dc21285_mtd);
iounmap(dc21285_map.virt);
}
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
deleted file mode 100644
index fe42a212bb3e..000000000000
--- a/drivers/mtd/maps/edb7312.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Handle mapping of the NOR flash on Cogent EDB7312 boards
- *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_ADDR 0x00000000 /* physical properties of flash */
-#define WINDOW_SIZE 0x01000000
-#define BUSWIDTH 2
-#define FLASH_BLOCKSIZE_MAIN 0x20000
-#define FLASH_NUMBLOCKS_MAIN 128
-/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
-#define PROBETYPES { "cfi_probe", NULL }
-
-#define MSG_PREFIX "EDB7312-NOR:" /* prefix for our printk()'s */
-#define MTDID "edb7312-nor" /* for mtdparts= partitioning */
-
-static struct mtd_info *mymtd;
-
-struct map_info edb7312nor_map = {
- .name = "NOR flash on EDB7312",
- .size = WINDOW_SIZE,
- .bankwidth = BUSWIDTH,
- .phys = WINDOW_ADDR,
-};
-
-/*
- * MTD partitioning stuff
- */
-static struct mtd_partition static_partitions[3] =
-{
- {
- .name = "ARMboot",
- .size = 0x40000,
- .offset = 0
- },
- {
- .name = "Kernel",
- .size = 0x200000,
- .offset = 0x40000
- },
- {
- .name = "RootFS",
- .size = 0xDC0000,
- .offset = 0x240000
- },
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int mtd_parts_nb = 0;
-static struct mtd_partition *mtd_parts = 0;
-
-static int __init init_edb7312nor(void)
-{
- static const char *rom_probe_types[] = PROBETYPES;
- const char **type;
- const char *part_type = 0;
-
- printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
- WINDOW_SIZE, WINDOW_ADDR);
- edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!edb7312nor_map.virt) {
- printk(MSG_PREFIX "failed to ioremap\n");
- return -EIO;
- }
-
- simple_map_init(&edb7312nor_map);
-
- mymtd = 0;
- type = rom_probe_types;
- for(; !mymtd && *type; type++) {
- mymtd = do_map_probe(*type, &edb7312nor_map);
- }
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
-
- mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
- if (mtd_parts_nb > 0)
- part_type = "detected";
-
- if (mtd_parts_nb == 0) {
- mtd_parts = static_partitions;
- mtd_parts_nb = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- if (mtd_parts_nb == 0)
- printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
- else
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n", part_type);
- /* Register the whole device first. */
- mtd_device_register(mymtd, NULL, 0);
- mtd_device_register(mymtd, mtd_parts, mtd_parts_nb);
- return 0;
- }
-
- iounmap((void *)edb7312nor_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_edb7312nor(void)
-{
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (edb7312nor_map.virt) {
- iounmap((void *)edb7312nor_map.virt);
- edb7312nor_map.virt = 0;
- }
-}
-
-module_init(init_edb7312nor);
-module_exit(cleanup_edb7312nor);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("Generic configurable MTD map driver");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 7568c5f8b8ae..1ec66f031c51 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -187,7 +187,6 @@ static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
*/
static int __devinit gpio_flash_probe(struct platform_device *pdev)
{
- int nr_parts;
size_t i, arr_size;
struct physmap_flash_data *pdata;
struct resource *memory;
@@ -252,20 +251,9 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
return -ENXIO;
}
- nr_parts = parse_mtd_partitions(state->mtd, part_probe_types,
- &pdata->parts, 0);
- if (nr_parts > 0) {
- pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
- kfree(pdata->parts);
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
- nr_parts = pdata->nr_parts;
- } else {
- pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
- nr_parts = 0;
- }
- mtd_device_register(state->mtd, pdata->parts, nr_parts);
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
return 0;
}
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 7f035860a36b..49c14187fc66 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -58,18 +58,11 @@ static struct mtd_partition h720x_partitions[] = {
#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
-static int nr_mtd_parts;
-static struct mtd_partition *mtd_parts;
-static const char *probes[] = { "cmdlinepart", NULL };
-
/*
* Initialize FLASH support
*/
static int __init h720x_mtd_init(void)
{
-
- char *part_type = NULL;
-
h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
if (!h720x_map.virt) {
@@ -92,16 +85,8 @@ static int __init h720x_mtd_init(void)
if (mymtd) {
mymtd->owner = THIS_MODULE;
- nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
- if (nr_mtd_parts > 0)
- part_type = "command line";
- if (nr_mtd_parts <= 0) {
- mtd_parts = h720x_partitions;
- nr_mtd_parts = NUM_PARTITIONS;
- part_type = "builtin";
- }
- printk(KERN_INFO "Using %s partition table\n", part_type);
- mtd_device_register(mymtd, mtd_parts, nr_mtd_parts);
+ mtd_device_parse_register(mymtd, NULL, 0,
+ h720x_partitions, NUM_PARTITIONS);
return 0;
}
@@ -120,10 +105,6 @@ static void __exit h720x_mtd_cleanup(void)
map_destroy(mymtd);
}
- /* Free partition info, if commandline partition was used */
- if (mtd_parts && (mtd_parts != h720x_partitions))
- kfree (mtd_parts);
-
if (h720x_map.virt) {
iounmap((void *)h720x_map.virt);
h720x_map.virt = 0;
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index 404a50cbafa0..f47aedb24366 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -49,7 +49,7 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = {
/*
* MTD partitioning stuff
*/
-static struct mtd_partition static_partitions[] =
+static struct mtd_partition partitions[] =
{
{
.name = "FileSystem",
@@ -58,16 +58,10 @@ static struct mtd_partition static_partitions[] =
},
};
-static int mtd_parts_nb[NUM_FLASHBANKS];
-static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
static int __init init_impa7(void)
{
static const char *rom_probe_types[] = PROBETYPES;
const char **type;
- const char *part_type = 0;
int i;
static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
{ WINDOW_ADDR0, WINDOW_SIZE0 },
@@ -97,23 +91,9 @@ static int __init init_impa7(void)
if (impa7_mtd[i]) {
impa7_mtd[i]->owner = THIS_MODULE;
devicesfound++;
- mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
- probes,
- &mtd_parts[i],
- 0);
- if (mtd_parts_nb[i] > 0) {
- part_type = "command line";
- } else {
- mtd_parts[i] = static_partitions;
- mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n",
- part_type);
- mtd_device_register(impa7_mtd[i],
- mtd_parts[i], mtd_parts_nb[i]);
+ mtd_device_parse_register(impa7_mtd[i], NULL, 0,
+ partitions,
+ ARRAY_SIZE(partitions));
}
else
iounmap((void *)impa7_map[i].virt);
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index d2f47be8754b..08c239604ee4 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -44,7 +44,6 @@ struct vr_nor_mtd {
void __iomem *csr_base;
struct map_info map;
struct mtd_info *info;
- int nr_parts;
struct pci_dev *dev;
};
@@ -71,13 +70,9 @@ static void __devexit vr_nor_destroy_partitions(struct vr_nor_mtd *p)
static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
{
- struct mtd_partition *parts;
- static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* register the flash bank */
/* partition the flash bank */
- p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
- return mtd_device_register(p->info, parts, p->nr_parts);
+ return mtd_device_parse_register(p->info, NULL, 0, NULL, 0);
}
static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index 1594a802631d..437fcd2f352f 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -38,7 +38,6 @@
struct ixp2000_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
@@ -125,8 +124,6 @@ static int ixp2000_flash_remove(struct platform_device *dev)
if (info->map.map_priv_1)
iounmap((void *) info->map.map_priv_1);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
@@ -229,13 +226,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
- if (err > 0) {
- err = mtd_device_register(info->mtd, info->partitions, err);
- if(err)
- dev_err(&dev->dev, "Could not parse partitions\n");
- }
-
+ err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
if (err)
goto Error;
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 155b21942f47..30409015a3de 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -145,7 +145,6 @@ static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
struct ixp4xx_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
@@ -168,8 +167,6 @@ static int ixp4xx_flash_remove(struct platform_device *dev)
if (info->map.virt)
iounmap(info->map.virt);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
@@ -185,8 +182,6 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
{
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
- const char *part_type = NULL;
- int nr_parts = 0;
int err = -1;
if (!plat)
@@ -252,28 +247,12 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
/* Use the fast version */
info->map.write = ixp4xx_write16;
- nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
- dev->resource->start);
- if (nr_parts > 0) {
- part_type = "dynamic";
- } else {
- info->partitions = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
- if (nr_parts == 0)
- printk(KERN_NOTICE "IXP4xx flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "IXP4xx flash: using %s partition "
- "definition\n", part_type);
-
- err = mtd_device_register(info->mtd, info->partitions, nr_parts);
- if (err)
+ err = mtd_device_parse_register(info->mtd, probes, dev->resource->start,
+ plat->parts, plat->nr_parts);
+ if (err) {
printk(KERN_ERR "Could not parse partitions\n");
-
- if (err)
goto Error;
+ }
return 0;
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index 7e508969239e..4f10e27ada55 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -107,16 +107,12 @@ ltq_copy_to(struct map_info *map, unsigned long to,
spin_unlock_irqrestore(&ebu_lock, flags);
}
-static const char const *part_probe_types[] = { "cmdlinepart", NULL };
-
static int __init
ltq_mtd_probe(struct platform_device *pdev)
{
struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
struct ltq_mtd *ltq_mtd;
- struct mtd_partition *parts;
struct resource *res;
- int nr_parts = 0;
struct cfi_private *cfi;
int err;
@@ -172,17 +168,8 @@ ltq_mtd_probe(struct platform_device *pdev)
cfi->addr_unlock1 ^= 1;
cfi->addr_unlock2 ^= 1;
- nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
- part_probe_types, &parts, 0);
- if (nr_parts > 0) {
- dev_info(&pdev->dev,
- "using %d partitions from cmdline", nr_parts);
- } else {
- nr_parts = ltq_mtd_data->nr_parts;
- parts = ltq_mtd_data->parts;
- }
-
- err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts);
+ err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0,
+ ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
if (err) {
dev_err(&pdev->dev, "failed to add partitions\n");
goto err_destroy;
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
index 5936c466e901..119baa7d7477 100644
--- a/drivers/mtd/maps/latch-addr-flash.c
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -33,9 +33,6 @@ struct latch_addr_flash_info {
/* cache; could be found out of res */
unsigned long win_mask;
- int nr_parts;
- struct mtd_partition *parts;
-
spinlock_t lock;
};
@@ -97,8 +94,6 @@ static void lf_copy_from(struct map_info *map, void *to,
static char *rom_probe_types[] = { "cfi_probe", NULL };
-static char *part_probe_types[] = { "cmdlinepart", NULL };
-
static int latch_addr_flash_remove(struct platform_device *dev)
{
struct latch_addr_flash_info *info;
@@ -112,8 +107,6 @@ static int latch_addr_flash_remove(struct platform_device *dev)
latch_addr_data = dev->dev.platform_data;
if (info->mtd != NULL) {
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
@@ -206,21 +199,8 @@ static int __devinit latch_addr_flash_probe(struct platform_device *dev)
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, (const char **)part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- return 0;
- }
- if (latch_addr_data->nr_parts) {
- pr_notice("Using latch-addr-flash partition information\n");
- mtd_device_register(info->mtd,
- latch_addr_data->parts,
- latch_addr_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ mtd_device_parse_register(info->mtd, NULL, 0,
+ latch_addr_data->parts, latch_addr_data->nr_parts);
return 0;
iounmap:
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index bbe168b65c26..e8e9fec23553 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -22,22 +22,6 @@
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#ifdef CONFIG_MTD_DEBUG
-static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
-#undef DEBUG
-#define DEBUG(n, format, arg...) \
- if (n <= debug) { \
- printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
- }
-
-#else
-#undef DEBUG
-#define DEBUG(n, arg...)
-static const int debug = 0;
-#endif
-
#define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
#define DRIVER_DESC "PCMCIA Flash memory card driver"
@@ -105,13 +89,13 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
int ret;
if (!pcmcia_dev_present(dev->p_dev)) {
- DEBUG(1, "device removed");
+ pr_debug("device removed\n");
return 0;
}
offset = to & ~(dev->win_size-1);
if (offset != dev->offset) {
- DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
+ pr_debug("Remapping window from 0x%8.8x to 0x%8.8x\n",
dev->offset, offset);
ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
if (ret != 0)
@@ -132,7 +116,7 @@ static map_word pcmcia_read8_remap(struct map_info *map, unsigned long ofs)
return d;
d.x[0] = readb(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n", ofs, addr, d.x[0]);
return d;
}
@@ -147,7 +131,7 @@ static map_word pcmcia_read16_remap(struct map_info *map, unsigned long ofs)
return d;
d.x[0] = readw(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n", ofs, addr, d.x[0]);
return d;
}
@@ -157,7 +141,7 @@ static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
while(len) {
int toread = win_size - (from & (win_size-1));
caddr_t addr;
@@ -169,7 +153,7 @@ static void pcmcia_copy_from_remap(struct map_info *map, void *to, unsigned long
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+ pr_debug("memcpy from %p to %p len = %d\n", addr, to, toread);
memcpy_fromio(to, addr, toread);
len -= toread;
to += toread;
@@ -185,7 +169,7 @@ static void pcmcia_write8_remap(struct map_info *map, map_word d, unsigned long
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n", adr, addr, d.x[0]);
writeb(d.x[0], addr);
}
@@ -196,7 +180,7 @@ static void pcmcia_write16_remap(struct map_info *map, map_word d, unsigned long
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n", adr, addr, d.x[0]);
writew(d.x[0], addr);
}
@@ -206,7 +190,7 @@ static void pcmcia_copy_to_remap(struct map_info *map, unsigned long to, const v
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
while(len) {
int towrite = win_size - (to & (win_size-1));
caddr_t addr;
@@ -218,7 +202,7 @@ static void pcmcia_copy_to_remap(struct map_info *map, unsigned long to, const v
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+ pr_debug("memcpy from %p to %p len = %d\n", from, addr, towrite);
memcpy_toio(addr, from, towrite);
len -= towrite;
to += towrite;
@@ -240,7 +224,7 @@ static map_word pcmcia_read8(struct map_info *map, unsigned long ofs)
return d;
d.x[0] = readb(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
@@ -255,7 +239,7 @@ static map_word pcmcia_read16(struct map_info *map, unsigned long ofs)
return d;
d.x[0] = readw(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
@@ -268,7 +252,7 @@ static void pcmcia_copy_from(struct map_info *map, void *to, unsigned long from,
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
memcpy_fromio(to, win_base + from, len);
}
@@ -280,7 +264,7 @@ static void pcmcia_write8(struct map_info *map, map_word d, unsigned long adr)
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n",
adr, win_base + adr, d.x[0]);
writeb(d.x[0], win_base + adr);
}
@@ -293,7 +277,7 @@ static void pcmcia_write16(struct map_info *map, map_word d, unsigned long adr)
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n",
adr, win_base + adr, d.x[0]);
writew(d.x[0], win_base + adr);
}
@@ -306,7 +290,7 @@ static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *f
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
memcpy_toio(win_base + to, from, len);
}
@@ -316,7 +300,7 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
struct pcmcia_device *link = dev->p_dev;
- DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
+ pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
}
@@ -325,7 +309,7 @@ static void pcmciamtd_release(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link = 0x%p", link);
+ pr_debug("link = 0x%p\n", link);
if (link->resource[2]->end) {
if(dev->win_base) {
@@ -337,7 +321,6 @@ static void pcmciamtd_release(struct pcmcia_device *link)
}
-#ifdef CONFIG_MTD_DEBUG
static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
tuple_t *tuple,
void *priv_data)
@@ -347,7 +330,7 @@ static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_format_t *t = &parse.format;
(void)t; /* Shut up, gcc */
- DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+ pr_debug("Format type: %u, Error Detection: %u, offset = %u, length =%u\n",
t->type, t->edc, t->offset, t->length);
}
return -ENOSPC;
@@ -363,12 +346,11 @@ static int pcmciamtd_cistpl_jedec(struct pcmcia_device *p_dev,
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_jedec_t *t = &parse.jedec;
for (i = 0; i < t->nid; i++)
- DEBUG(2, "JEDEC: 0x%02x 0x%02x",
+ pr_debug("JEDEC: 0x%02x 0x%02x\n",
t->id[i].mfr, t->id[i].info);
}
return -ENOSPC;
}
-#endif
static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
tuple_t *tuple,
@@ -382,14 +364,14 @@ static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
if (pcmcia_parse_tuple(tuple, &parse))
return -EINVAL;
- DEBUG(2, "Common memory:");
+ pr_debug("Common memory:\n");
dev->pcmcia_map.size = t->dev[0].size;
/* from here on: DEBUG only */
for (i = 0; i < t->ndev; i++) {
- DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
- DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
- DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
- DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+ pr_debug("Region %d, type = %u\n", i, t->dev[i].type);
+ pr_debug("Region %d, wp = %u\n", i, t->dev[i].wp);
+ pr_debug("Region %d, speed = %u ns\n", i, t->dev[i].speed);
+ pr_debug("Region %d, size = %u bytes\n", i, t->dev[i].size);
}
return 0;
}
@@ -409,12 +391,12 @@ static int pcmciamtd_cistpl_geo(struct pcmcia_device *p_dev,
dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
/* from here on: DEBUG only */
for (i = 0; i < t->ngeo; i++) {
- DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
- DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
- DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
- DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
- DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
- DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+ pr_debug("region: %d bankwidth = %u\n", i, t->geo[i].buswidth);
+ pr_debug("region: %d erase_block = %u\n", i, t->geo[i].erase_block);
+ pr_debug("region: %d read_block = %u\n", i, t->geo[i].read_block);
+ pr_debug("region: %d write_block = %u\n", i, t->geo[i].write_block);
+ pr_debug("region: %d partition = %u\n", i, t->geo[i].partition);
+ pr_debug("region: %d interleave = %u\n", i, t->geo[i].interleave);
}
return 0;
}
@@ -432,13 +414,11 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
if (p_dev->prod_id[i])
strcat(dev->mtd_name, p_dev->prod_id[i]);
}
- DEBUG(2, "Found name: %s", dev->mtd_name);
+ pr_debug("Found name: %s\n", dev->mtd_name);
}
-#ifdef CONFIG_MTD_DEBUG
pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
-#endif
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
@@ -450,12 +430,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
if(force_size) {
dev->pcmcia_map.size = force_size << 20;
- DEBUG(2, "size forced to %dM", force_size);
+ pr_debug("size forced to %dM\n", force_size);
}
if(bankwidth) {
dev->pcmcia_map.bankwidth = bankwidth;
- DEBUG(2, "bankwidth forced to %d", bankwidth);
+ pr_debug("bankwidth forced to %d\n", bankwidth);
}
dev->pcmcia_map.name = dev->mtd_name;
@@ -464,7 +444,7 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
*new_name = 1;
}
- DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+ pr_debug("Device: Size: %lu Width:%d Name: %s\n",
dev->pcmcia_map.size,
dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
}
@@ -479,7 +459,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
static char *probes[] = { "jedec_probe", "cfi_probe" };
int new_name = 0;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
card_settings(dev, link, &new_name);
@@ -512,11 +492,11 @@ static int pcmciamtd_config(struct pcmcia_device *link)
do {
int ret;
- DEBUG(2, "requesting window with size = %luKiB memspeed = %d",
+ pr_debug("requesting window with size = %luKiB memspeed = %d\n",
(unsigned long) resource_size(link->resource[2]) >> 10,
mem_speed);
ret = pcmcia_request_window(link, link->resource[2], mem_speed);
- DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+ pr_debug("ret = %d dev->win_size = %d\n", ret, dev->win_size);
if(ret) {
j++;
link->resource[2]->start = 0;
@@ -524,21 +504,21 @@ static int pcmciamtd_config(struct pcmcia_device *link)
force_size << 20 : MAX_PCMCIA_ADDR;
link->resource[2]->end >>= j;
} else {
- DEBUG(2, "Got window of size %luKiB", (unsigned long)
+ pr_debug("Got window of size %luKiB\n", (unsigned long)
resource_size(link->resource[2]) >> 10);
dev->win_size = resource_size(link->resource[2]);
break;
}
} while (link->resource[2]->end >= 0x1000);
- DEBUG(2, "dev->win_size = %d", dev->win_size);
+ pr_debug("dev->win_size = %d\n", dev->win_size);
if(!dev->win_size) {
dev_err(&dev->p_dev->dev, "Cannot allocate memory window\n");
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+ pr_debug("Allocated a window of %dKiB\n", dev->win_size >> 10);
/* Get write protect status */
dev->win_base = ioremap(link->resource[2]->start,
@@ -549,7 +529,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "mapped window dev = %p @ %pR, base = %p",
+ pr_debug("mapped window dev = %p @ %pR, base = %p\n",
dev, link->resource[2], dev->win_base);
dev->offset = 0;
@@ -564,7 +544,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
}
link->config_index = 0;
- DEBUG(2, "Setting Configuration");
+ pr_debug("Setting Configuration\n");
ret = pcmcia_enable_device(link);
if (ret != 0) {
if (dev->win_base) {
@@ -580,17 +560,17 @@ static int pcmciamtd_config(struct pcmcia_device *link)
mtd = do_map_probe("map_rom", &dev->pcmcia_map);
} else {
for(i = 0; i < ARRAY_SIZE(probes); i++) {
- DEBUG(1, "Trying %s", probes[i]);
+ pr_debug("Trying %s\n", probes[i]);
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
break;
- DEBUG(1, "FAILED: %s", probes[i]);
+ pr_debug("FAILED: %s\n", probes[i]);
}
}
if(!mtd) {
- DEBUG(1, "Can not find an MTD");
+ pr_debug("Can not find an MTD\n");
pcmciamtd_release(link);
return -ENODEV;
}
@@ -617,7 +597,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
/* If the memory found is fits completely into the mapped PCMCIA window,
use the faster non-remapping read/write functions */
if(mtd->size <= dev->win_size) {
- DEBUG(1, "Using non remapping memory functions");
+ pr_debug("Using non remapping memory functions\n");
dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
if (dev->pcmcia_map.bankwidth == 1) {
dev->pcmcia_map.read = pcmcia_read8;
@@ -645,7 +625,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
static int pcmciamtd_suspend(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_RESUME");
+ pr_debug("EVENT_PM_RESUME\n");
/* get_lock(link); */
@@ -654,7 +634,7 @@ static int pcmciamtd_suspend(struct pcmcia_device *dev)
static int pcmciamtd_resume(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_SUSPEND");
+ pr_debug("EVENT_PM_SUSPEND\n");
/* free_lock(link); */
@@ -666,7 +646,7 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
if(dev->mtd_info) {
mtd_device_unregister(dev->mtd_info);
@@ -686,7 +666,7 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
/* Create new memory card device */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) return -ENOMEM;
- DEBUG(1, "dev=0x%p", dev);
+ pr_debug("dev=0x%p\n", dev);
dev->p_dev = link;
link->priv = dev;
@@ -755,7 +735,7 @@ static int __init init_pcmciamtd(void)
static void __exit exit_pcmciamtd(void)
{
- DEBUG(1, DRIVER_DESC " unloading");
+ pr_debug(DRIVER_DESC " unloading");
pcmcia_unregister_driver(&pcmciamtd_driver);
}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index f64cee4a3bfb..66e8200079c2 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -27,8 +27,6 @@ struct physmap_flash_info {
struct mtd_info *mtd[MAX_RESOURCES];
struct mtd_info *cmtd;
struct map_info map[MAX_RESOURCES];
- int nr_parts;
- struct mtd_partition *parts;
};
static int physmap_flash_remove(struct platform_device *dev)
@@ -46,8 +44,6 @@ static int physmap_flash_remove(struct platform_device *dev)
if (info->cmtd) {
mtd_device_unregister(info->cmtd);
- if (info->nr_parts)
- kfree(info->parts);
if (info->cmtd != info->mtd[0])
mtd_concat_destroy(info->cmtd);
}
@@ -175,23 +171,8 @@ static int physmap_flash_probe(struct platform_device *dev)
if (err)
goto err_out;
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->cmtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (physmap_data->nr_parts) {
- printk(KERN_NOTICE "Using physmap partition information\n");
- mtd_device_register(info->cmtd, physmap_data->parts,
- physmap_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->cmtd, NULL, 0);
-
+ mtd_device_parse_register(info->cmtd, part_probe_types, 0,
+ physmap_data->parts, physmap_data->nr_parts);
return 0;
err_out:
@@ -245,21 +226,6 @@ static struct platform_device physmap_flash = {
.num_resources = 1,
.resource = &physmap_flash_resource,
};
-
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int))
-{
- physmap_flash_resource.start = addr;
- physmap_flash_resource.end = addr + size - 1;
- physmap_flash_data.width = bankwidth;
- physmap_flash_data.set_vpp = set_vpp;
-}
-
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
- physmap_flash_data.nr_parts = num_parts;
- physmap_flash_data.parts = parts;
-}
#endif
static int __init physmap_init(void)
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index d251d1db129b..7d65f9d3e690 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -34,58 +34,10 @@ struct of_flash_list {
struct of_flash {
struct mtd_info *cmtd;
- struct mtd_partition *parts;
int list_size; /* number of elements in of_flash_list */
struct of_flash_list list[0];
};
-#define OF_FLASH_PARTS(info) ((info)->parts)
-static int parse_obsolete_partitions(struct platform_device *dev,
- struct of_flash *info,
- struct device_node *dp)
-{
- int i, plen, nr_parts;
- const struct {
- __be32 offset, len;
- } *part;
- const char *names;
-
- part = of_get_property(dp, "partitions", &plen);
- if (!part)
- return 0; /* No partitions found */
-
- dev_warn(&dev->dev, "Device tree uses obsolete partition map binding\n");
-
- nr_parts = plen / sizeof(part[0]);
-
- info->parts = kzalloc(nr_parts * sizeof(*info->parts), GFP_KERNEL);
- if (!info->parts)
- return -ENOMEM;
-
- names = of_get_property(dp, "partition-names", &plen);
-
- for (i = 0; i < nr_parts; i++) {
- info->parts[i].offset = be32_to_cpu(part->offset);
- info->parts[i].size = be32_to_cpu(part->len) & ~1;
- if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
- info->parts[i].mask_flags = MTD_WRITEABLE;
-
- if (names && (plen > 0)) {
- int len = strlen(names) + 1;
-
- info->parts[i].name = (char *)names;
- plen -= len;
- names += len;
- } else {
- info->parts[i].name = "unnamed";
- }
-
- part++;
- }
-
- return nr_parts;
-}
-
static int of_flash_remove(struct platform_device *dev)
{
struct of_flash *info;
@@ -101,11 +53,8 @@ static int of_flash_remove(struct platform_device *dev)
mtd_concat_destroy(info->cmtd);
}
- if (info->cmtd) {
- if (OF_FLASH_PARTS(info))
- kfree(OF_FLASH_PARTS(info));
+ if (info->cmtd)
mtd_device_unregister(info->cmtd);
- }
for (i = 0; i < info->list_size; i++) {
if (info->list[i].mtd)
@@ -165,7 +114,8 @@ static struct mtd_info * __devinit obsolete_probe(struct platform_device *dev,
specifies the list of partition probers to use. If none is given then the
default is use. These take precedence over other device tree
information. */
-static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot",
+ "ofpart", "ofoldpart", NULL };
static const char ** __devinit of_get_probes(struct device_node *dp)
{
const char *cp;
@@ -218,6 +168,7 @@ static int __devinit of_flash_probe(struct platform_device *dev)
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
+ struct mtd_part_parser_data ppdata;
match = of_match_device(of_flash_match, &dev->dev);
if (!match)
@@ -331,29 +282,12 @@ static int __devinit of_flash_probe(struct platform_device *dev)
if (err)
goto err_out;
+ ppdata.of_node = dp;
part_probe_types = of_get_probes(dp);
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err < 0) {
- of_free_probes(part_probe_types);
- goto err_out;
- }
+ mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+ NULL, 0);
of_free_probes(part_probe_types);
- if (err == 0) {
- err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
- if (err < 0)
- goto err_out;
- }
-
- if (err == 0) {
- err = parse_obsolete_partitions(dev, info, dp);
- if (err < 0)
- goto err_out;
- }
-
- mtd_device_register(info->cmtd, info->parts, err);
-
kfree(mtd_list);
return 0;
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 9ca1eccba4bc..94f553489725 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -44,8 +44,6 @@ struct platram_info {
struct device *dev;
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
- bool free_partitions;
struct resource *area;
struct platdata_mtd_ram *pdata;
};
@@ -95,10 +93,6 @@ static int platram_remove(struct platform_device *pdev)
if (info->mtd) {
mtd_device_unregister(info->mtd);
- if (info->partitions) {
- if (info->free_partitions)
- kfree(info->partitions);
- }
map_destroy(info->mtd);
}
@@ -228,21 +222,8 @@ static int platram_probe(struct platform_device *pdev)
/* check to see if there are any available partitions, or wether
* to add this device whole */
- if (!pdata->nr_partitions) {
- /* try to probe using the supplied probe type */
- if (pdata->probes) {
- err = parse_mtd_partitions(info->mtd, pdata->probes,
- &info->partitions, 0);
- info->free_partitions = 1;
- if (err > 0)
- err = mtd_device_register(info->mtd,
- info->partitions, err);
- }
- }
- /* use the static mapping */
- else
- err = mtd_device_register(info->mtd, pdata->partitions,
- pdata->nr_partitions);
+ err = mtd_device_parse_register(info->mtd, pdata->probes, 0,
+ pdata->partitions, pdata->nr_partitions);
if (!err)
dev_info(&pdev->dev, "registered mtd device\n");
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 7ae137d4b998..411a17df9fc1 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -41,8 +41,6 @@ static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from,
}
struct pxa2xx_flash_info {
- struct mtd_partition *parts;
- int nr_parts;
struct mtd_info *mtd;
struct map_info map;
};
@@ -55,9 +53,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
- struct mtd_partition *parts;
struct resource *res;
- int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -71,8 +67,6 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
info->map.bankwidth = flash->width;
info->map.phys = res->start;
info->map.size = resource_size(res);
- info->parts = flash->parts;
- info->nr_parts = flash->nr_parts;
info->map.virt = ioremap(info->map.phys, info->map.size);
if (!info->map.virt) {
@@ -104,18 +98,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
}
info->mtd->owner = THIS_MODULE;
- ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
- if (ret > 0) {
- info->nr_parts = ret;
- info->parts = parts;
- }
-
- if (!info->nr_parts)
- printk("Registering %s as whole device\n",
- info->map.name);
-
- mtd_device_register(info->mtd, info->parts, info->nr_parts);
+ mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
platform_set_drvdata(pdev, info);
return 0;
@@ -133,7 +116,6 @@ static int __devexit pxa2xx_flash_remove(struct platform_device *dev)
iounmap(info->map.virt);
if (info->map.cached)
iounmap(info->map.cached);
- kfree(info->parts);
kfree(info);
return 0;
}
diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c
index 761fb459d2c7..0237f197fd12 100644
--- a/drivers/mtd/maps/rbtx4939-flash.c
+++ b/drivers/mtd/maps/rbtx4939-flash.c
@@ -25,8 +25,6 @@
struct rbtx4939_flash_info {
struct mtd_info *mtd;
struct map_info map;
- int nr_parts;
- struct mtd_partition *parts;
};
static int rbtx4939_flash_remove(struct platform_device *dev)
@@ -41,8 +39,6 @@ static int rbtx4939_flash_remove(struct platform_device *dev)
if (info->mtd) {
struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
@@ -50,7 +46,6 @@ static int rbtx4939_flash_remove(struct platform_device *dev)
}
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
-static const char *part_probe_types[] = { "cmdlinepart", NULL };
static int rbtx4939_flash_probe(struct platform_device *dev)
{
@@ -107,22 +102,11 @@ static int rbtx4939_flash_probe(struct platform_device *dev)
info->mtd->owner = THIS_MODULE;
if (err)
goto err_out;
+ err = mtd_device_parse_register(info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
- err = parse_mtd_partitions(info->mtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (pdata->nr_parts) {
- pr_notice("Using rbtx4939 partition information\n");
- mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ if (err)
+ goto err_out;
return 0;
err_out:
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index a9b5e0e5c4c5..fa9c0a9670cd 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -131,10 +131,8 @@ struct sa_subdev_info {
};
struct sa_info {
- struct mtd_partition *parts;
struct mtd_info *mtd;
int num_subdev;
- unsigned int nr_parts;
struct sa_subdev_info subdev[0];
};
@@ -231,8 +229,6 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
mtd_concat_destroy(info->mtd);
}
- kfree(info->parts);
-
for (i = info->num_subdev - 1; i >= 0; i--)
sa1100_destroy_subdev(&info->subdev[i]);
kfree(info);
@@ -341,10 +337,8 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
{
struct flash_platform_data *plat = pdev->dev.platform_data;
- struct mtd_partition *parts;
- const char *part_type = NULL;
struct sa_info *info;
- int err, nr_parts = 0;
+ int err;
if (!plat)
return -ENODEV;
@@ -358,26 +352,8 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
/*
* Partition selection stuff.
*/
- nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- info->parts = parts;
- part_type = "dynamic";
- } else {
- parts = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
-
- if (nr_parts == 0)
- printk(KERN_NOTICE "SA1100 flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "SA1100 flash: using %s partition "
- "definition\n", part_type);
-
- mtd_device_register(info->mtd, parts, nr_parts);
-
- info->nr_parts = nr_parts;
+ mtd_device_parse_register(info->mtd, part_probes, 0,
+ plat->parts, plat->nr_parts);
platform_set_drvdata(pdev, info);
err = 0;
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index cbf6bade9354..496c40704aff 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -19,8 +19,6 @@
static struct mtd_info *flash_mtd;
static struct mtd_info *eprom_mtd;
-static struct mtd_partition *parsed_parts;
-
struct map_info soleng_eprom_map = {
.name = "Solution Engine EPROM",
.size = 0x400000,
@@ -51,12 +49,14 @@ static struct mtd_partition superh_se_partitions[] = {
.size = MTDPART_SIZ_FULL,
}
};
+#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions)
+#else
+#define superh_se_partitions NULL
+#define NUM_PARTITIONS 0
#endif /* CONFIG_MTD_SUPERH_RESERVE */
static int __init init_soleng_maps(void)
{
- int nr_parts = 0;
-
/* First probe at offset 0 */
soleng_flash_map.phys = 0;
soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
@@ -92,21 +92,8 @@ static int __init init_soleng_maps(void)
mtd_device_register(eprom_mtd, NULL, 0);
}
- nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
- if (nr_parts <= 0) {
- printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
- CONFIG_MTD_SUPERH_RESERVE);
- parsed_parts = superh_se_partitions;
- nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
- }
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
-
- if (nr_parts > 0)
- mtd_device_register(flash_mtd, parsed_parts, nr_parts);
- else
- mtd_device_register(flash_mtd, NULL, 0);
+ mtd_device_parse_register(flash_mtd, probes, 0,
+ superh_se_partitions, NUM_PARTITIONS);
return 0;
}
@@ -118,10 +105,7 @@ static void __exit cleanup_soleng_maps(void)
map_destroy(eprom_mtd);
}
- if (parsed_parts)
- mtd_device_unregister(flash_mtd);
- else
- mtd_device_unregister(flash_mtd);
+ mtd_device_unregister(flash_mtd);
map_destroy(flash_mtd);
}
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index 901ce968efae..aa7e0cb2893c 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -20,7 +20,6 @@
#include <asm/immap_cpm2.h>
static struct mtd_info *sbcmtd[3];
-static struct mtd_partition *sbcmtd_parts[3];
struct map_info sbc82xx_flash_map[3] = {
{.name = "Boot flash"},
@@ -101,6 +100,7 @@ static int __init init_sbc82xx_flash(void)
for (i=0; i<3; i++) {
int8_t flashcs[3] = { 0, 6, 1 };
int nr_parts;
+ struct mtd_partition *defparts;
printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
sbc82xx_flash_map[i].name,
@@ -113,7 +113,8 @@ static int __init init_sbc82xx_flash(void)
}
printk(" at %08lx)\n", sbc82xx_flash_map[i].phys);
- sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
+ sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
+ sbc82xx_flash_map[i].size);
if (!sbc82xx_flash_map[i].virt) {
printk("Failed to ioremap\n");
@@ -129,24 +130,20 @@ static int __init init_sbc82xx_flash(void)
sbcmtd[i]->owner = THIS_MODULE;
- nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
- &sbcmtd_parts[i], 0);
- if (nr_parts > 0) {
- mtd_device_register(sbcmtd[i], sbcmtd_parts[i],
- nr_parts);
- continue;
- }
-
/* No partitioning detected. Use default */
if (i == 2) {
- mtd_device_register(sbcmtd[i], NULL, 0);
+ defparts = NULL;
+ nr_parts = 0;
} else if (i == bigflash) {
- mtd_device_register(sbcmtd[i], bigflash_parts,
- ARRAY_SIZE(bigflash_parts));
+ defparts = bigflash_parts;
+ nr_parts = ARRAY_SIZE(bigflash_parts);
} else {
- mtd_device_register(sbcmtd[i], smallflash_parts,
- ARRAY_SIZE(smallflash_parts));
+ defparts = smallflash_parts;
+ nr_parts = ARRAY_SIZE(smallflash_parts);
}
+
+ mtd_device_parse_register(sbcmtd[i], part_probes, 0,
+ defparts, nr_parts);
}
return 0;
}
@@ -159,12 +156,8 @@ static void __exit cleanup_sbc82xx_flash(void)
if (!sbcmtd[i])
continue;
- if (i<2 || sbcmtd_parts[i])
- mtd_device_unregister(sbcmtd[i]);
- else
- mtd_device_unregister(sbcmtd[i]);
+ mtd_device_unregister(sbcmtd[i]);
- kfree(sbcmtd_parts[i]);
map_destroy(sbcmtd[i]);
iounmap((void *)sbc82xx_flash_map[i].virt);
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index ca385697446e..ed8b5e744b12 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -426,6 +426,8 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
new->rq->queuedata = new;
blk_queue_logical_block_size(new->rq, tr->blksize);
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, new->rq);
+
if (tr->discard) {
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, new->rq);
new->rq->limits.max_discard_sectors = UINT_MAX;
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 3326615ad66b..7c1dc908a174 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -44,7 +44,7 @@ struct mtdblk_dev {
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
};
-static struct mutex mtdblks_lock;
+static DEFINE_MUTEX(mtdblks_lock);
/*
* Cache stuff...
@@ -119,7 +119,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
if (mtdblk->cache_state != STATE_DIRTY)
return 0;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+ pr_debug("mtdblock: writing cached data for \"%s\" "
"at 0x%lx, size 0x%x\n", mtd->name,
mtdblk->cache_offset, mtdblk->cache_size);
@@ -148,7 +148,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos,
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
@@ -218,7 +218,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos,
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
@@ -283,7 +283,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ pr_debug("mtdblock_open\n");
mutex_lock(&mtdblks_lock);
if (mtdblk->count) {
@@ -303,7 +303,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
@@ -312,7 +312,7 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ pr_debug("mtdblock_release\n");
mutex_lock(&mtdblks_lock);
@@ -329,7 +329,7 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
@@ -389,8 +389,6 @@ static struct mtd_blktrans_ops mtdblock_tr = {
static int __init init_mtdblock(void)
{
- mutex_init(&mtdblks_lock);
-
return register_mtd_blktrans(&mtdblock_tr);
}
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 61086ea3cc6b..e7dc732ddabc 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -43,7 +43,7 @@ static struct vfsmount *mtd_inode_mnt __read_mostly;
/*
* Data structure to hold the pointer to the mtd device as well
- * as mode information ofr various use cases.
+ * as mode information of various use cases.
*/
struct mtd_file_info {
struct mtd_info *mtd;
@@ -86,7 +86,7 @@ static int mtd_open(struct inode *inode, struct file *file)
struct mtd_file_info *mfi;
struct inode *mtd_ino;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+ pr_debug("MTD_open\n");
/* You can't open the RO devices RW */
if ((file->f_mode & FMODE_WRITE) && (minor & 1))
@@ -151,7 +151,7 @@ static int mtd_close(struct inode *inode, struct file *file)
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+ pr_debug("MTD_close\n");
/* Only sync if opened RW */
if ((file->f_mode & FMODE_WRITE) && mtd->sync)
@@ -195,7 +195,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
size_t size = count;
char *kbuf;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+ pr_debug("MTD_read\n");
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
@@ -211,17 +211,17 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
len = min_t(size_t, count, size);
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
@@ -233,16 +233,16 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
default:
ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
}
- /* Nand returns -EBADMSG on ecc errors, but it returns
+ /* Nand returns -EBADMSG on ECC errors, but it returns
* the data. For our userspace tools it is important
- * to dump areas with ecc errors !
+ * to dump areas with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
- if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
+ if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
kfree(kbuf);
@@ -278,7 +278,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
int ret=0;
int len;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+ pr_debug("MTD_write\n");
if (*ppos == mtd->size)
return -ENOSPC;
@@ -302,10 +302,10 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
}
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = -EROFS;
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (!mtd->write_user_prot_reg) {
ret = -EOPNOTSUPP;
break;
@@ -313,13 +313,14 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
+ ops.ooboffs = 0;
ops.len = len;
ret = mtd->write_oob(mtd, *ppos, &ops);
@@ -367,13 +368,13 @@ static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_FACTORY;
+ mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
break;
case MTD_OTP_USER:
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_USER;
+ mfi->mode = MTD_FILE_MODE_OTP_USER;
break;
default:
ret = -EINVAL;
@@ -390,6 +391,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
uint64_t start, uint32_t length, void __user *ptr,
uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
uint32_t retlen;
int ret = 0;
@@ -409,9 +411,10 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
@@ -420,7 +423,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
if (IS_ERR(ops.oobbuf))
return PTR_ERR(ops.oobbuf);
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->write_oob(mtd, start, &ops);
if (ops.oobretlen > 0xFFFFFFFFU)
@@ -433,9 +436,11 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd,
return ret;
}
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
- uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtd_do_readoob(struct file *file, struct mtd_info *mtd,
+ uint64_t start, uint32_t length, void __user *ptr,
+ uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
int ret = 0;
@@ -451,9 +456,10 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
@@ -462,7 +468,7 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
if (!ops.oobbuf)
return -ENOMEM;
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->read_oob(mtd, start, &ops);
if (put_user(ops.oobretlen, retp))
@@ -472,13 +478,29 @@ static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
ret = -EFAULT;
kfree(ops.oobbuf);
+
+ /*
+ * NAND returns -EBADMSG on ECC errors, but it returns the OOB
+ * data. For our userspace tools it is important to dump areas
+ * with ECC errors!
+ * For kernel internal usage it also might return -EUCLEAN
+ * to signal the caller that a bitflip has occured and has
+ * been corrected by the ECC algorithm.
+ *
+ * Note: currently the standard NAND function, nand_read_oob_std,
+ * does not calculate ECC for the OOB area, so do not rely on
+ * this behavior unless you have replaced it with your own.
+ */
+ if (mtd_is_bitflip_or_eccerr(ret))
+ return 0;
+
return ret;
}
/*
* Copies (and truncates, if necessary) data from the larger struct,
* nand_ecclayout, to the smaller, deprecated layout struct,
- * nand_ecclayout_user. This is necessary only to suppport the deprecated
+ * nand_ecclayout_user. This is necessary only to support the deprecated
* API ioctl ECCGETLAYOUT while allowing all new functionality to use
* nand_ecclayout flexibly (i.e. the struct may change size in new
* releases without requiring major rewrites).
@@ -544,6 +566,55 @@ static int mtd_blkpg_ioctl(struct mtd_info *mtd,
}
}
+static int mtd_write_ioctl(struct mtd_info *mtd,
+ struct mtd_write_req __user *argp)
+{
+ struct mtd_write_req req;
+ struct mtd_oob_ops ops;
+ void __user *usr_data, *usr_oob;
+ int ret;
+
+ if (copy_from_user(&req, argp, sizeof(req)) ||
+ !access_ok(VERIFY_READ, req.usr_data, req.len) ||
+ !access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
+ return -EFAULT;
+ if (!mtd->write_oob)
+ return -EOPNOTSUPP;
+
+ ops.mode = req.mode;
+ ops.len = (size_t)req.len;
+ ops.ooblen = (size_t)req.ooblen;
+ ops.ooboffs = 0;
+
+ usr_data = (void __user *)(uintptr_t)req.usr_data;
+ usr_oob = (void __user *)(uintptr_t)req.usr_oob;
+
+ if (req.usr_data) {
+ ops.datbuf = memdup_user(usr_data, ops.len);
+ if (IS_ERR(ops.datbuf))
+ return PTR_ERR(ops.datbuf);
+ } else {
+ ops.datbuf = NULL;
+ }
+
+ if (req.usr_oob) {
+ ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
+ if (IS_ERR(ops.oobbuf)) {
+ kfree(ops.datbuf);
+ return PTR_ERR(ops.oobbuf);
+ }
+ } else {
+ ops.oobbuf = NULL;
+ }
+
+ ret = mtd->write_oob(mtd, (loff_t)req.start, &ops);
+
+ kfree(ops.datbuf);
+ kfree(ops.oobbuf);
+
+ return ret;
+}
+
static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
@@ -553,7 +624,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
u_long size;
struct mtd_info_user info;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+ pr_debug("MTD_ioctl\n");
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (cmd & IOC_IN) {
@@ -601,8 +672,8 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
- /* The below fields are obsolete */
- info.ecctype = -1;
+ /* The below field is obsolete */
+ info.padding = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
@@ -698,7 +769,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->start);
break;
}
@@ -725,12 +796,19 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
}
+ case MEMWRITE:
+ {
+ ret = mtd_write_ioctl(mtd,
+ (struct mtd_write_req __user *)arg);
+ break;
+ }
+
case MEMLOCK:
{
struct erase_info_user einfo;
@@ -827,7 +905,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
- mfi->mode = MTD_MODE_NORMAL;
+ mfi->mode = MTD_FILE_MODE_NORMAL;
ret = otp_select_filemode(mfi, mode);
@@ -843,11 +921,11 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
return -ENOMEM;
ret = -EOPNOTSUPP;
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
if (mtd->get_fact_prot_info)
ret = mtd->get_fact_prot_info(mtd, buf, 4096);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (mtd->get_user_prot_info)
ret = mtd->get_user_prot_info(mtd, buf, 4096);
break;
@@ -871,7 +949,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct otp_info oinfo;
- if (mfi->mode != MTD_MODE_OTP_USER)
+ if (mfi->mode != MTD_FILE_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
return -EFAULT;
@@ -882,7 +960,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
}
#endif
- /* This ioctl is being deprecated - it truncates the ecc layout */
+ /* This ioctl is being deprecated - it truncates the ECC layout */
case ECCGETLAYOUT:
{
struct nand_ecclayout_user *usrlay;
@@ -915,17 +993,17 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
mfi->mode = 0;
switch(arg) {
- case MTD_MODE_OTP_FACTORY:
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_USER:
ret = otp_select_filemode(mfi, arg);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
if (!mtd->read_oob || !mtd->write_oob)
return -EOPNOTSUPP;
mfi->mode = arg;
- case MTD_MODE_NORMAL:
+ case MTD_FILE_MODE_NORMAL:
break;
default:
ret = -EINVAL;
@@ -1011,7 +1089,7 @@ static long mtd_compat_ioctl(struct file *file, unsigned int cmd,
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start,
+ ret = mtd_do_readoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->start);
break;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index e601672a5305..6df4d4d4eb92 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -95,10 +95,10 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
@@ -279,10 +279,10 @@ concat_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
@@ -770,7 +770,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
/*
* Set up the new "super" device's MTD object structure, check for
- * incompatibilites between the subdevices.
+ * incompatibilities between the subdevices.
*/
concat->mtd.type = subdev[0]->type;
concat->mtd.flags = subdev[0]->flags;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c510aff289a8..b01993ea260e 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -362,7 +362,7 @@ int add_mtd_device(struct mtd_info *mtd)
MTD_DEVT(i) + 1,
NULL, "mtd%dro", i);
- DEBUG(0, "mtd: Giving out device %d to %s\n", i, mtd->name);
+ pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
/* No need to get a refcount on the module containing
the notifier, since we hold the mtd_table_mutex */
list_for_each_entry(not, &mtd_notifiers, list)
@@ -429,27 +429,63 @@ out_error:
}
/**
- * mtd_device_register - register an MTD device.
+ * mtd_device_parse_register - parse partitions and register an MTD device.
*
- * @master: the MTD device to register
- * @parts: the partitions to register - only valid if nr_parts > 0
- * @nr_parts: the number of partitions in parts. If zero then the full MTD
- * device is registered
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ * 'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ * only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ * MTD device is registered if no partition info is found
*
- * Register an MTD device with the system and optionally, a number of
- * partitions. If nr_parts is 0 then the whole device is registered, otherwise
- * only the partitions are registered. To register both the full device *and*
- * the partitions, call mtd_device_register() twice, once with nr_parts == 0
- * and once equal to the number of partitions.
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ * specified in @types (if @types is %NULL, then the default list of parsers
+ * is used, see 'parse_mtd_partitions()' for more information). If none are
+ * found this functions tries to fallback to information specified in
+ * @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ * partitions.
+ * * If no partitions were found this function just registers the MTD device
+ * @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
*/
-int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts)
+int mtd_device_parse_register(struct mtd_info *mtd, const char **types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *parts,
+ int nr_parts)
{
- return parts ? add_mtd_partitions(master, parts, nr_parts) :
- add_mtd_device(master);
+ int err;
+ struct mtd_partition *real_parts;
+
+ err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+ if (err <= 0 && nr_parts && parts) {
+ real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+ GFP_KERNEL);
+ if (!real_parts)
+ err = -ENOMEM;
+ else
+ err = nr_parts;
+ }
+
+ if (err > 0) {
+ err = add_mtd_partitions(mtd, real_parts, err);
+ kfree(real_parts);
+ } else if (err == 0) {
+ err = add_mtd_device(mtd);
+ if (err == 1)
+ err = -ENODEV;
+ }
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mtd_device_register);
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
/**
* mtd_device_unregister - unregister an existing MTD device.
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 0ed6126b4c1f..961a38408542 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -15,6 +15,9 @@ extern int del_mtd_device(struct mtd_info *mtd);
extern int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *,
int);
extern int del_mtd_partitions(struct mtd_info *);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data);
#define mtd_for_each_device(mtd) \
for ((mtd) = __mtd_next_device(0); \
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index e3e40f440323..1e2fa6236705 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -258,7 +258,7 @@ static void find_next_position(struct mtdoops_context *cxt)
ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
&retlen, (u_char *) &count[0]);
if (retlen != MTDOOPS_HEADER_SIZE ||
- (ret < 0 && ret != -EUCLEAN)) {
+ (ret < 0 && !mtd_is_bitflip(ret))) {
printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
page * record_size, retlen,
MTDOOPS_HEADER_SIZE, ret);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 630be3e7da04..a0bd2de4752b 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -73,9 +73,9 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
res = part->master->read(part->master, from + part->offset,
len, retlen, buf);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
}
return res;
@@ -130,7 +130,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
if (ops->oobbuf) {
size_t len, pages;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = mtd->oobavail;
else
len = mtd->oobsize;
@@ -142,9 +142,9 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
res = part->master->read_oob(part->master, from + part->offset, ops);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed++;
}
return res;
@@ -479,6 +479,19 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
}
}
+ if (slave->offset == MTDPART_OFS_RETAIN) {
+ slave->offset = cur_offset;
+ if (master->size - slave->offset >= slave->mtd.size) {
+ slave->mtd.size = master->size - slave->offset
+ - slave->mtd.size;
+ } else {
+ printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+ part->name, master->size - slave->offset,
+ slave->mtd.size);
+ /* register to preserve ordering */
+ goto out_register;
+ }
+ }
if (slave->mtd.size == MTDPART_SIZ_FULL)
slave->mtd.size = master->size - slave->offset;
@@ -693,6 +706,8 @@ static struct mtd_part_parser *get_partition_parser(const char *name)
return ret;
}
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
int register_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
@@ -712,19 +727,51 @@ int deregister_mtd_parser(struct mtd_part_parser *p)
}
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char *default_mtd_part_types[] = {
+ "cmdlinepart",
+ "ofpart",
+ NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ * point to an array containing this number of &struct mtd_info objects.
+ */
int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_part_parser *parser;
int ret = 0;
+ if (!types)
+ types = default_mtd_part_types;
+
for ( ; ret <= 0 && *types; types++) {
parser = get_partition_parser(*types);
if (!parser && !request_module("%s", *types))
parser = get_partition_parser(*types);
if (!parser)
continue;
- ret = (*parser->parse_fn)(master, pparts, origin);
+ ret = (*parser->parse_fn)(master, pparts, data);
if (ret > 0) {
printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
ret, parser->name, master->name);
@@ -733,7 +780,6 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
}
return ret;
}
-EXPORT_SYMBOL_GPL(parse_mtd_partitions);
int mtd_is_partition(struct mtd_info *mtd)
{
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 89f8e66448ab..a90bfe79916d 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -27,12 +27,12 @@ static int get_sb_mtd_compare(struct super_block *sb, void *_mtd)
struct mtd_info *mtd = _mtd;
if (sb->s_mtd == mtd) {
- DEBUG(2, "MTDSB: Match on device %d (\"%s\")\n",
+ pr_debug("MTDSB: Match on device %d (\"%s\")\n",
mtd->index, mtd->name);
return 1;
}
- DEBUG(2, "MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
+ pr_debug("MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
sb->s_mtd->index, sb->s_mtd->name, mtd->index, mtd->name);
return 0;
}
@@ -71,7 +71,7 @@ static struct dentry *mount_mtd_aux(struct file_system_type *fs_type, int flags,
goto already_mounted;
/* fresh new superblock */
- DEBUG(1, "MTDSB: New superblock for device %d (\"%s\")\n",
+ pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
mtd->index, mtd->name);
sb->s_flags = flags;
@@ -88,7 +88,7 @@ static struct dentry *mount_mtd_aux(struct file_system_type *fs_type, int flags,
/* new mountpoint for an already mounted superblock */
already_mounted:
- DEBUG(1, "MTDSB: Device %d (\"%s\") is already mounted\n",
+ pr_debug("MTDSB: Device %d (\"%s\") is already mounted\n",
mtd->index, mtd->name);
put_mtd_device(mtd);
return dget(sb->s_root);
@@ -109,7 +109,7 @@ static struct dentry *mount_mtd_nr(struct file_system_type *fs_type, int flags,
mtd = get_mtd_device(NULL, mtdnr);
if (IS_ERR(mtd)) {
- DEBUG(0, "MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
+ pr_debug("MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
return ERR_CAST(mtd);
}
@@ -132,7 +132,7 @@ struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
if (!dev_name)
return ERR_PTR(-EINVAL);
- DEBUG(2, "MTDSB: dev_name \"%s\"\n", dev_name);
+ pr_debug("MTDSB: dev_name \"%s\"\n", dev_name);
/* the preferred way of mounting in future; especially when
* CONFIG_BLOCK=n - we specify the underlying MTD device by number or
@@ -143,7 +143,7 @@ struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
struct mtd_info *mtd;
/* mount by MTD device name */
- DEBUG(1, "MTDSB: mtd:%%s, name \"%s\"\n",
+ pr_debug("MTDSB: mtd:%%s, name \"%s\"\n",
dev_name + 4);
mtd = get_mtd_device_nm(dev_name + 4);
@@ -164,7 +164,7 @@ struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
mtdnr = simple_strtoul(dev_name + 3, &endptr, 0);
if (!*endptr) {
/* It was a valid number */
- DEBUG(1, "MTDSB: mtd%%d, mtdnr %d\n",
+ pr_debug("MTDSB: mtd%%d, mtdnr %d\n",
mtdnr);
return mount_mtd_nr(fs_type, flags,
dev_name, data,
@@ -180,10 +180,10 @@ struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
bdev = lookup_bdev(dev_name);
if (IS_ERR(bdev)) {
ret = PTR_ERR(bdev);
- DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
+ pr_debug("MTDSB: lookup_bdev() returned %d\n", ret);
return ERR_PTR(ret);
}
- DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
+ pr_debug("MTDSB: lookup_bdev() returned 0\n");
ret = -EINVAL;
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index fd7885327611..bd9590c723e4 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -86,7 +86,7 @@ struct swap_eb {
unsigned int flags;
unsigned int active_count;
unsigned int erase_count;
- unsigned int pad; /* speeds up pointer decremtnt */
+ unsigned int pad; /* speeds up pointer decrement */
};
#define MTDSWAP_ECNT_MIN(rbroot) (rb_entry(rb_first(rbroot), struct swap_eb, \
@@ -314,7 +314,7 @@ static int mtdswap_read_oob(struct mtdswap_dev *d, loff_t from,
{
int ret = d->mtd->read_oob(d->mtd, from, ops);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
return ret;
if (ret) {
@@ -350,11 +350,11 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
ops.oobbuf = d->oob_buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ret = mtdswap_read_oob(d, offset, &ops);
- if (ret && ret != -EUCLEAN)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
data = (struct mtdswap_oobdata *)d->oob_buf;
@@ -363,7 +363,7 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
eb->erase_count = le32_to_cpu(data->count);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
ret = MTDSWAP_SCANNED_BITFLIP;
else {
if (le16_to_cpu(data2->magic) == MTDSWAP_MAGIC_DIRTY)
@@ -389,7 +389,7 @@ static int mtdswap_write_marker(struct mtdswap_dev *d, struct swap_eb *eb,
ops.ooboffs = 0;
ops.oobbuf = (uint8_t *)&n;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
if (marker == MTDSWAP_TYPE_CLEAN) {
@@ -408,7 +408,7 @@ static int mtdswap_write_marker(struct mtdswap_dev *d, struct swap_eb *eb,
if (ret) {
dev_warn(d->dev, "Write OOB failed for block at %08llx "
"error %d\n", offset, ret);
- if (ret == -EIO || ret == -EBADMSG)
+ if (ret == -EIO || mtd_is_eccerr(ret))
mtdswap_handle_write_error(d, eb);
return ret;
}
@@ -628,7 +628,7 @@ static int mtdswap_map_free_block(struct mtdswap_dev *d, unsigned int page,
TREE_COUNT(d, CLEAN)--;
ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_DIRTY);
- } while (ret == -EIO || ret == -EBADMSG);
+ } while (ret == -EIO || mtd_is_eccerr(ret));
if (ret)
return ret;
@@ -678,7 +678,7 @@ retry:
ret = mtdswap_map_free_block(d, page, bp);
eb = d->eb_data + (*bp / d->pages_per_eblk);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write = NULL;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
@@ -690,7 +690,7 @@ retry:
writepos = (loff_t)*bp << PAGE_SHIFT;
ret = mtd->write(mtd, writepos, PAGE_SIZE, &retlen, buf);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write_pos--;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
@@ -738,7 +738,7 @@ static int mtdswap_move_block(struct mtdswap_dev *d, unsigned int oldblock,
retry:
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, d->page_buf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
oldeb = d->eb_data + oldblock / d->pages_per_eblk;
oldeb->flags |= EBLOCK_READERR;
@@ -931,7 +931,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooboffs = 0;
@@ -1016,7 +1016,7 @@ static int mtdswap_gc(struct mtdswap_dev *d, unsigned int background)
if (ret == 0)
mtdswap_rb_add(d, eb, MTDSWAP_CLEAN);
- else if (ret != -EIO && ret != -EBADMSG)
+ else if (ret != -EIO && !mtd_is_eccerr(ret))
mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
return 0;
@@ -1164,7 +1164,7 @@ retry:
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, buf);
d->mtd_read_count++;
- if (ret == -EUCLEAN) {
+ if (mtd_is_bitflip(ret)) {
eb->flags |= EBLOCK_BITFLIP;
mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
ret = 0;
@@ -1374,11 +1374,10 @@ static int mtdswap_init(struct mtdswap_dev *d, unsigned int eblocks,
goto revmap_fail;
eblk_bytes = sizeof(struct swap_eb)*d->eblks;
- d->eb_data = vmalloc(eblk_bytes);
+ d->eb_data = vzalloc(eblk_bytes);
if (!d->eb_data)
goto eb_data_fail;
- memset(d->eb_data, 0, eblk_bytes);
for (i = 0; i < pages; i++)
d->page_data[i] = BLOCK_UNDEF;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dbfa0f7fb464..cce7b70824c3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -83,16 +83,9 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
-config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
- help
- This enables the driver for the Cirrus Logic EBD7312 evaluation
- board to access the onboard NAND Flash.
-
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
- depends on ARCH_PXA
+ depends on ARCH_PXA && BROKEN
help
This enables the driver for the iPAQ h1900 flash.
@@ -116,10 +109,11 @@ config MTD_NAND_AMS_DELTA
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+ tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
help
- Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+ platforms.
config MTD_NAND_IDS
tristate
@@ -423,6 +417,19 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NAND
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time. The GPMI may conflicts with other
+ block, such as SD card. So pay attention to it when you enable
+ the GPMI.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5745d831168e..618f4ba23699 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
@@ -49,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 55da20ccc7a8..23e5d77c39fc 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -161,37 +161,6 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
!!host->board->rdy_pin_active_low;
}
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
static void dma_complete_func(void *completion)
{
complete(completion);
@@ -266,33 +235,27 @@ err_buf:
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board->bus_width_16)
- atmel_read_buf16(mtd, buf, len);
- else
- atmel_read_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_fromio(buf, chip->IO_ADDR_R, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board->bus_width_16)
- atmel_write_buf16(mtd, buf, len);
- else
- atmel_write_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_toio(chip->IO_ADDR_W, buf, len);
}
/*
@@ -481,10 +444,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
}
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
/*
* Probe for the NAND device.
*/
@@ -496,8 +455,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct resource *regs;
struct resource *mem;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
@@ -583,7 +540,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
if (!cpu_has_dma())
@@ -594,7 +551,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
- host->dma_chan = dma_request_channel(mask, 0, NULL);
+ host->dma_chan = dma_request_channel(mask, NULL, NULL);
if (!host->dma_chan) {
dev_err(host->dev, "Failed to request DMA channel\n");
use_dma = 0;
@@ -655,27 +612,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
goto err_scan_tail;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "atmel_nand";
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
-#endif
- if (num_partitions <= 0 && host->board->partition_info)
- partitions = host->board->partition_info(mtd->size,
- &num_partitions);
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
- res = -ENXIO;
- goto err_no_partitions;
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, 0,
+ host->board->parts, host->board->num_parts);
if (!res)
return res;
-err_no_partitions:
- nand_release(mtd);
err_scan_tail:
err_scan_ident:
err_no_card:
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index fa5736b9286c..7dd3700f2303 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -52,7 +52,7 @@ static const struct mtd_partition partition_info[] = {
* au_read_byte - read one byte from the chip
* @mtd: MTD device structure
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static u_char au_read_byte(struct mtd_info *mtd)
{
@@ -67,7 +67,7 @@ static u_char au_read_byte(struct mtd_info *mtd)
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 8it buswith
+ * write function for 8it buswidth
*/
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
@@ -77,11 +77,10 @@ static void au_write_byte(struct mtd_info *mtd, u_char byte)
}
/**
- * au_read_byte16 - read one byte endianess aware from the chip
+ * au_read_byte16 - read one byte endianness aware from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
*/
static u_char au_read_byte16(struct mtd_info *mtd)
{
@@ -92,12 +91,11 @@ static u_char au_read_byte16(struct mtd_info *mtd)
}
/**
- * au_write_byte16 - write one byte endianess aware to the chip
+ * au_write_byte16 - write one byte endianness aware to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
*/
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
@@ -110,8 +108,7 @@ static void au_write_byte16(struct mtd_info *mtd, u_char byte)
* au_read_word - read one word from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
*/
static u16 au_read_word(struct mtd_info *mtd)
{
@@ -127,7 +124,7 @@ static u16 au_read_word(struct mtd_info *mtd)
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 8bit buswith
+ * write function for 8bit buswidth
*/
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -146,7 +143,7 @@ static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
@@ -165,7 +162,7 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 8bit buswith
+ * verify function for 8bit buswidth
*/
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -187,7 +184,7 @@ static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 16bit buswith
+ * write function for 16bit buswidth
*/
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -209,7 +206,7 @@ static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 16bit buswith
+ * read function for 16bit buswidth
*/
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
@@ -230,7 +227,7 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 16bit buswith
+ * verify function for 16bit buswidth
*/
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index eddc9a224985..2e42ec2e8ff4 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -172,9 +172,9 @@ static int __init autcpu12_init(void)
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
*/
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 8c569e454dc5..46b58d672847 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -52,8 +52,6 @@
static const __devinitconst char gBanner[] = KERN_INFO \
"BCM UMI MTD NAND Driver: 1.00\n";
-const char *part_probes[] = { "cmdlinepart", NULL };
-
#if NAND_ECC_BCH
static uint8_t scan_ff_pattern[] = { 0xff };
@@ -376,16 +374,18 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENXIO;
+ if (!r) {
+ err = -ENXIO;
+ goto out_free;
+ }
/* map physical address */
bcm_umi_io_base = ioremap(r->start, resource_size(r));
if (!bcm_umi_io_base) {
printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_free;
}
/* Get pointer to private data */
@@ -401,9 +401,8 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
/* Initialize the NAND hardware. */
if (bcm_umi_nand_inithw() < 0) {
printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_unmap;
}
/* Set address of NAND IO lines */
@@ -436,7 +435,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
#if USE_DMA
err = nand_dma_init();
if (err != 0)
- return err;
+ goto out_unmap;
#endif
/* Figure out the size of the device that we have.
@@ -447,9 +446,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Now that we know the nand size, we can setup the ECC layout */
@@ -468,13 +465,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
{
printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
board_mtd->writesize);
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
}
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
@@ -485,33 +483,20 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_tail(board_mtd);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Register the partitions */
- {
- int nr_partitions;
- struct mtd_partition *partition_info;
-
- board_mtd->name = "bcm_umi-nand";
- nr_partitions =
- parse_mtd_partitions(board_mtd, part_probes,
- &partition_info, 0);
-
- if (nr_partitions <= 0) {
- printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
- nr_partitions);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
- }
- mtd_device_register(board_mtd, partition_info, nr_partitions);
- }
+ board_mtd->name = "bcm_umi-nand";
+ mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
/* Return happy */
return 0;
+out_unmap:
+ iounmap(bcm_umi_io_base);
+out_free:
+ kfree(board_mtd);
+ return err;
}
static int bcm_umi_nand_remove(struct platform_device *pdev)
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 7c8df837d3b8..72d3f23490c5 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -58,7 +58,6 @@
struct cafe_priv {
struct nand_chip nand;
- struct mtd_partition *parts;
struct pci_dev *pdev;
void __iomem *mmio;
struct rs_control *rs;
@@ -372,7 +371,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
return 1;
}
/**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
@@ -631,8 +630,6 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
- struct mtd_partition *parts;
- int nr_parts;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
@@ -687,7 +684,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.chip_delay = 0;
/* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+ cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -800,18 +798,9 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, mtd);
- /* We register the whole device first, separate from the partitions */
- mtd_device_register(mtd, NULL, 0);
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "cafe_nand";
-#endif
- nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- cafe->parts = parts;
- dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
- mtd_device_register(mtd, parts, nr_parts);
- }
+ mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+
goto out;
out_irq:
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index be33b0f4634d..737ef9a04fdb 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -51,8 +51,6 @@ static struct mtd_partition partition_info[] = {
};
#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static u_char cmx270_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
@@ -152,9 +150,6 @@ static int cmx270_device_ready(struct mtd_info *mtd)
static int __init cmx270_init(void)
{
struct nand_chip *this;
- const char *part_type;
- struct mtd_partition *mtd_parts;
- int mtd_parts_nb = 0;
int ret;
if (!(machine_is_armcore() && cpu_is_pxa27x()))
@@ -223,23 +218,9 @@ static int __init cmx270_init(void)
goto err_scan;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
- &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (!mtd_parts_nb) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
/* Register the partitions */
- pr_notice("Using %s partition definition\n", part_type);
- ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
if (ret)
goto err_scan;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index f59ad1f2d5db..414afa793563 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -239,7 +239,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
this->ecc.correct = nand_correct_data;
/* Enable the following for a flash based bad block table */
- this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ this->bbt_options = NAND_BBT_USE_FLASH;
+ this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
@@ -277,15 +278,11 @@ static int is_geode(void)
return 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = NULL;
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
@@ -315,13 +312,9 @@ static int __init cs553x_init(void)
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
-
/* If any devices registered, return success. Else the last error. */
- mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- printk(KERN_NOTICE "Using command line partition definition\n");
- mtd_device_register(cs553x_mtd[i], mtd_parts,
- mtd_parts_nb);
+ mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+ NULL, 0);
err = 0;
}
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 1f34951ae1a7..c153e1f77f90 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -57,7 +57,6 @@ struct davinci_nand_info {
struct device *dev;
struct clk *clk;
- bool partitioned;
bool is_readmode;
@@ -530,8 +529,6 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
int ret;
uint32_t val;
nand_ecc_modes_t ecc_mode;
- struct mtd_partition *mtd_parts = NULL;
- int mtd_parts_nb = 0;
/* insist on board-specific configuration */
if (!pdata)
@@ -581,7 +578,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;
- /* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+ /* options such as NAND_BBT_USE_FLASH */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
@@ -751,33 +750,8 @@ syndrome_done:
if (ret < 0)
goto err_scan;
- if (mtd_has_cmdlinepart()) {
- static const char *probes[] __initconst = {
- "cmdlinepart", NULL
- };
-
- mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
- &mtd_parts, 0);
- }
-
- if (mtd_parts_nb <= 0) {
- mtd_parts = pdata->parts;
- mtd_parts_nb = pdata->nr_parts;
- }
-
- /* Register any partitions */
- if (mtd_parts_nb > 0) {
- ret = mtd_device_register(&info->mtd, mtd_parts,
- mtd_parts_nb);
- if (ret == 0)
- info->partitioned = true;
- }
-
- /* If there's no partition info, just package the whole chip
- * as a single MTD device.
- */
- if (!info->partitioned)
- ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0;
+ ret = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
if (ret < 0)
goto err_scan;
@@ -816,9 +790,6 @@ err_nomem:
static int __exit nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
- int status;
-
- status = mtd_device_unregister(&info->mtd);
spin_lock_irq(&davinci_nand_lock);
if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index d5276218945f..3984d488f9ab 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1346,6 +1346,7 @@ static void denali_hw_init(struct denali_nand_info *denali)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
+ detect_max_banks(denali);
denali_nand_reset(denali);
iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG,
@@ -1356,7 +1357,6 @@ static void denali_hw_init(struct denali_nand_info *denali)
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
- detect_max_banks(denali);
denali_nand_timing_set(denali);
denali_irq_init(denali);
}
@@ -1577,7 +1577,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
/* Denali Controller only support 15bit and 8bit ECC in MRST,
@@ -1676,7 +1677,6 @@ static void denali_pci_remove(struct pci_dev *dev)
struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_release(&denali->mtd);
- mtd_device_unregister(&denali->mtd);
denali_irq_cleanup(dev->irq, denali);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e1b84cb90f0d..5780dbab6113 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -133,7 +133,7 @@ static struct rs_control *rs_decoder;
/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
* Reed-Solomon library code.
*
* Fabrice Bellard figured this out in the old docecc code. I added
@@ -154,7 +154,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
parity = ecc[1];
- /* Initialize the syndrom buffer */
+ /* Initialize the syndrome buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
/*
@@ -1032,7 +1032,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
- if (no_ecc_failures && (ret == -EBADMSG)) {
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
printk(KERN_ERR "suppressing ECC failure\n");
ret = 0;
}
@@ -1653,7 +1653,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
doc->virtadr = virtadr;
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
deleted file mode 100644
index 8400d0f6dada..000000000000
--- a/drivers/mtd/nand/edb7312.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * drivers/mtd/nand/edb7312.c
- *
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- * a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
-#define EP7312_PXDR 0x0001 /*
- * IO offset to Port B data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define EP7312_PXDDR 0x0041 /*
- * IO offset to Port B data direction
- * register so we can control the IO
- * lines.
- */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
- {.name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- * NAND_CLE: bit 1 -> bit 4
- * NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned char bits = 0x80;
-
- bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
- bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
- clps_writeb((clps_readb(ep7312_pxdr) & 0xF0) | bits,
- ep7312_pxdr);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
- return 1;
-}
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem *ep7312_fio_base;
-
- /* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ep7312_mtd) {
- printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if (!ep7312_fio_base) {
- printk("ioremap EDB7312 NAND flash failed\n");
- kfree(ep7312_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ep7312_mtd[1]);
-
- /* Initialize structures */
- memset(ep7312_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ep7312_mtd->priv = this;
- ep7312_mtd->owner = THIS_MODULE;
-
- /*
- * Set GPIO Port B control register so that the pins are configured
- * to be outputs for controlling the NAND flash.
- */
- clps_writeb(0xf0, ep7312_pxddr);
-
- /* insert callbacks */
- this->IO_ADDR_R = ep7312_fio_base;
- this->IO_ADDR_W = ep7312_fio_base;
- this->cmd_ctrl = ep7312_hwcontrol;
- this->dev_ready = ep7312_device_ready;
- /* 15 us command delay time */
- this->chip_delay = 15;
-
- /* Scan to find existence of the device */
- if (nand_scan(ep7312_mtd, 1)) {
- iounmap((void *)ep7312_fio_base);
- kfree(ep7312_mtd);
- return -ENXIO;
- }
- ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
- struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
- /* Release resources, unregister device */
- nand_release(ap7312_mtd);
-
- /* Release io resource */
- iounmap(this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 33d8aad8bba5..eedd8ee2c9ac 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,6 @@ struct fsl_elbc_fcm_ctrl {
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
- char *oob_poi; /* Place to write ECC after read back */
};
/* These map to the positions used by the FCM hardware ECC generator */
@@ -244,6 +243,25 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicates which 512 byte sub-pages had fixed errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ */
+ if (lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if (lteccr & 0x000F0000)
+ mtd->ecc_stats.corrected++;
+ }
+
return 0;
}
@@ -435,7 +453,6 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
- int full_page;
dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
"writing %d bytes.\n", elbc_fcm_ctrl->index);
@@ -445,34 +462,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
* write so the HW generates the ECC.
*/
if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
- elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
- full_page = 0;
- } else {
+ else
out_be32(&lbc->fbcr, 0);
- full_page = 1;
- }
fsl_elbc_run_command(mtd);
-
- /* Read back the page in order to fill in the ECC for the
- * caller. Is this really needed?
- */
- if (full_page && elbc_fcm_ctrl->oob_poi) {
- out_be32(&lbc->fbcr, 3);
- set_addr(mtd, 6, page_addr, 1);
-
- elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
-
- fsl_elbc_do_read(chip, 1);
- fsl_elbc_run_command(mtd);
-
- memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
- &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
- elbc_fcm_ctrl->index += 3;
- }
-
- elbc_fcm_ctrl->oob_poi = NULL;
return;
}
@@ -752,13 +747,8 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf)
{
- struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
-
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- elbc_fcm_ctrl->oob_poi = chip->oob_poi;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
@@ -791,8 +781,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
@@ -829,7 +819,6 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
elbc_fcm_ctrl->chips[priv->bank] = NULL;
kfree(priv);
- kfree(elbc_fcm_ctrl);
return 0;
}
@@ -842,13 +831,14 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
struct resource res;
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
static const char *part_probe_types[]
- = { "cmdlinepart", "RedBoot", NULL };
- struct mtd_partition *parts;
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
int ret;
int bank;
struct device *dev;
struct device_node *node = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ ppdata.of_node = pdev->dev.of_node;
if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
lbc = fsl_lbc_ctrl_dev->regs;
@@ -934,17 +924,8 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(priv->dev, node, &parts);
- if (ret < 0)
- goto err;
- }
-
- mtd_device_register(&priv->mtd, parts, ret);
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 23752fd5bc59..b4f3cc9f32fb 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -158,7 +158,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
{
int ret;
struct device_node *flash_np;
- static const char *part_types[] = { "cmdlinepart", NULL, };
+ struct mtd_part_parser_data ppdata;
fun->chip.IO_ADDR_R = fun->io_base;
fun->chip.IO_ADDR_W = fun->io_base;
@@ -192,18 +192,12 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
if (ret)
goto err;
- ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0) {
- ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
- if (ret < 0)
- goto err;
- }
-#endif
- ret = mtd_device_register(&fun->mtd, fun->parts, ret);
+ ppdata.of_node = flash_np;
+ ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
+ if (ret)
+ kfree(fun->mtd.name);
return ret;
}
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index e9b275ac381c..e53b76064133 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -146,7 +146,7 @@ static struct mtd_partition partition_info_16KB_blk[] = {
{
.name = "Root File System",
.offset = 0x460000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
@@ -173,13 +173,10 @@ static struct mtd_partition partition_info_128KB_blk[] = {
{
.name = "Root File System",
.offset = 0x800000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
@@ -187,8 +184,6 @@ const char *part_probes[] = { "cmdlinepart", NULL };
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
- * @partitions: Partition info for a NAND Flash.
- * @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
@@ -203,8 +198,6 @@ struct fsmc_nand_data {
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
@@ -716,65 +709,17 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* platform data,
* default partition information present in driver.
*/
-#ifdef CONFIG_MTD_CMDLINE_PARTS
/*
- * Check if partition info passed via command line
+ * Check for partition info passed
*/
host->mtd.name = "nand";
- host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
- &host->partitions, 0);
- if (host->nr_partitions <= 0) {
-#endif
- /*
- * Check if partition info passed via command line
- */
- if (pdata->partitions) {
- host->partitions = pdata->partitions;
- host->nr_partitions = pdata->nr_partitions;
- } else {
- struct mtd_partition *partition;
- int i;
-
- /* Select the default partitions info */
- switch (host->mtd.size) {
- case 0x01000000:
- case 0x02000000:
- case 0x04000000:
- host->partitions = partition_info_16KB_blk;
- host->nr_partitions =
- sizeof(partition_info_16KB_blk) /
- sizeof(struct mtd_partition);
- break;
- case 0x08000000:
- case 0x10000000:
- case 0x20000000:
- case 0x40000000:
- host->partitions = partition_info_128KB_blk;
- host->nr_partitions =
- sizeof(partition_info_128KB_blk) /
- sizeof(struct mtd_partition);
- break;
- default:
- ret = -ENXIO;
- pr_err("Unsupported NAND size\n");
- goto err_probe;
- }
-
- partition = host->partitions;
- for (i = 0; i < host->nr_partitions; i++, partition++) {
- if (partition->size == 0) {
- partition->size = host->mtd.size -
- partition->offset;
- break;
- }
- }
- }
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- }
-#endif
-
- ret = mtd_device_register(&host->mtd, host->partitions,
- host->nr_partitions);
+ ret = mtd_device_parse_register(&host->mtd, NULL, 0,
+ host->mtd.size <= 0x04000000 ?
+ partition_info_16KB_blk :
+ partition_info_128KB_blk,
+ host->mtd.size <= 0x04000000 ?
+ ARRAY_SIZE(partition_info_16KB_blk) :
+ ARRAY_SIZE(partition_info_128KB_blk));
if (ret)
goto err_probe;
@@ -822,7 +767,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (host) {
- mtd_device_unregister(&host->mtd);
+ nand_release(&host->mtd);
clk_disable(host->clk);
clk_put(host->clk);
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 000000000000..3a462487c35e
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
new file mode 100644
index 000000000000..4effb8c579db
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -0,0 +1,84 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL 0x00000000
+#define HW_BCH_CTRL_SET 0x00000004
+#define HW_BCH_CTRL_CLR 0x00000008
+#define HW_BCH_CTRL_TOG 0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define HW_BCH_STATUS0 0x00000010
+#define HW_BCH_MODE 0x00000020
+#define HW_BCH_ENCODEPTR 0x00000030
+#define HW_BCH_DATAPTR 0x00000040
+#define HW_BCH_METAPTR 0x00000050
+#define HW_BCH_LAYOUTSELECT 0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0 0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1 0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
+ (0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
new file mode 100644
index 000000000000..de4db7604a3f
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -0,0 +1,1057 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <mach/mxs.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+struct timing_threshod timing_default_threshold = {
+ .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
+ BP_GPMI_TIMING0_DATA_SETUP),
+ .internal_data_setup_in_ns = 0,
+ .max_sample_delay_factor = (BM_GPMI_CTRL1_RDN_DELAY >>
+ BP_GPMI_CTRL1_RDN_DELAY),
+ .max_dll_clock_period_in_ns = 32,
+ .max_dll_delay_in_ns = 16,
+};
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ __mxs_clrl(mask, addr);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+#define MODULE_CLKGATE (1 << 30)
+#define MODULE_SFTRST (1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ * [1] enable the module.
+ * [2] reset the module.
+ *
+ * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ __mxs_clrl(MODULE_CLKGATE, reset_addr);
+
+ if (!just_enable) {
+ /* set SFTRST to reset the block */
+ __mxs_setl(MODULE_SFTRST, reset_addr);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+ }
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ int ret;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+ ret = gpmi_reset_block(r->gpmi_regs, false);
+ if (ret)
+ goto err_out;
+
+ /* Choose NAND mode. */
+ writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Set the IRQ polarity. */
+ writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+ r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Disable Write-Protection. */
+ writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Select BCH ECC. */
+ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *geo = &this->bch_geometry;
+ u32 reg;
+ int i;
+
+ pr_err("Show GPMI registers :\n");
+ for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+ reg = readl(r->gpmi_regs + i * 0x10);
+ pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+
+ /* start to print out the BCH info */
+ pr_err("BCH Geometry :\n");
+ pr_err("GF length : %u\n", geo->gf_len);
+ pr_err("ECC Strength : %u\n", geo->ecc_strength);
+ pr_err("Page Size in Bytes : %u\n", geo->page_size);
+ pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
+ pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
+ pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count);
+ pr_err("Payload Size in Bytes : %u\n", geo->payload_size);
+ pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
+ pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
+ pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
+ pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH. */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ unsigned int block_count;
+ unsigned int block_size;
+ unsigned int metadata_size;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ int ret;
+
+ if (common_nfc_set_geometry(this))
+ return !0;
+
+ block_count = bch_geo->ecc_chunk_count - 1;
+ block_size = bch_geo->ecc_chunk_size;
+ metadata_size = bch_geo->metadata_size;
+ ecc_strength = bch_geo->ecc_strength >> 1;
+ page_size = bch_geo->page_size;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+
+ ret = gpmi_reset_block(r->bch_regs, true);
+ if (ret)
+ goto err_out;
+
+ /* Configure layout 0. */
+ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* Set *all* chip selects to use layout 0. */
+ writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+ /* Enable interrupts. */
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ r->bch_regs + HW_BCH_CTRL_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+ unsigned int period, unsigned int min)
+{
+ unsigned int k;
+
+ k = (time + period - 1) / period;
+ return max(k, min);
+}
+
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ struct nand_chip *nand = &this->nand;
+ struct nand_timing target = this->timing;
+ bool improved_timing_is_available;
+ unsigned long clock_frequency_in_hz;
+ unsigned int clock_period_in_ns;
+ bool dll_use_half_periods;
+ unsigned int dll_delay_shift;
+ unsigned int max_sample_delay_in_ns;
+ unsigned int address_setup_in_cycles;
+ unsigned int data_setup_in_ns;
+ unsigned int data_setup_in_cycles;
+ unsigned int data_hold_in_cycles;
+ int ideal_sample_delay_in_ns;
+ unsigned int sample_delay_factor;
+ int tEYE;
+ unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
+ unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+
+ /*
+ * If there are multiple chips, we need to relax the timings to allow
+ * for signal distortion due to higher capacitance.
+ */
+ if (nand->numchips > 2) {
+ target.data_setup_in_ns += 10;
+ target.data_hold_in_ns += 10;
+ target.address_setup_in_ns += 10;
+ } else if (nand->numchips > 1) {
+ target.data_setup_in_ns += 5;
+ target.data_hold_in_ns += 5;
+ target.address_setup_in_ns += 5;
+ }
+
+ /* Check if improved timing information is available. */
+ improved_timing_is_available =
+ (target.tREA_in_ns >= 0) &&
+ (target.tRLOH_in_ns >= 0) &&
+ (target.tRHOH_in_ns >= 0) ;
+
+ /* Inspect the clock. */
+ clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+ clock_period_in_ns = 1000000000 / clock_frequency_in_hz;
+
+ /*
+ * The NFC quantizes setup and hold parameters in terms of clock cycles.
+ * Here, we quantize the setup and hold timing parameters to the
+ * next-highest clock period to make sure we apply at least the
+ * specified times.
+ *
+ * For data setup and data hold, the hardware interprets a value of zero
+ * as the largest possible delay. This is not what's intended by a zero
+ * in the input parameter, so we impose a minimum of one cycle.
+ */
+ data_setup_in_cycles = ns_to_cycles(target.data_setup_in_ns,
+ clock_period_in_ns, 1);
+ data_hold_in_cycles = ns_to_cycles(target.data_hold_in_ns,
+ clock_period_in_ns, 1);
+ address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+ clock_period_in_ns, 0);
+
+ /*
+ * The clock's period affects the sample delay in a number of ways:
+ *
+ * (1) The NFC HAL tells us the maximum clock period the sample delay
+ * DLL can tolerate. If the clock period is greater than half that
+ * maximum, we must configure the DLL to be driven by half periods.
+ *
+ * (2) We need to convert from an ideal sample delay, in ns, to a
+ * "sample delay factor," which the NFC uses. This factor depends on
+ * whether we're driving the DLL with full or half periods.
+ * Paraphrasing the reference manual:
+ *
+ * AD = SDF x 0.125 x RP
+ *
+ * where:
+ *
+ * AD is the applied delay, in ns.
+ * SDF is the sample delay factor, which is dimensionless.
+ * RP is the reference period, in ns, which is a full clock period
+ * if the DLL is being driven by full periods, or half that if
+ * the DLL is being driven by half periods.
+ *
+ * Let's re-arrange this in a way that's more useful to us:
+ *
+ * 8
+ * SDF = AD x ----
+ * RP
+ *
+ * The reference period is either the clock period or half that, so this
+ * is:
+ *
+ * 8 AD x DDF
+ * SDF = AD x ----- = --------
+ * f x P P
+ *
+ * where:
+ *
+ * f is 1 or 1/2, depending on how we're driving the DLL.
+ * P is the clock period.
+ * DDF is the DLL Delay Factor, a dimensionless value that
+ * incorporates all the constants in the conversion.
+ *
+ * DDF will be either 8 or 16, both of which are powers of two. We can
+ * reduce the cost of this conversion by using bit shifts instead of
+ * multiplication or division. Thus:
+ *
+ * AD << DDS
+ * SDF = ---------
+ * P
+ *
+ * or
+ *
+ * AD = (SDF >> DDS) x P
+ *
+ * where:
+ *
+ * DDS is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+ */
+ if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+ dll_use_half_periods = true;
+ dll_delay_shift = 3 + 1;
+ } else {
+ dll_use_half_periods = false;
+ dll_delay_shift = 3;
+ }
+
+ /*
+ * Compute the maximum sample delay the NFC allows, under current
+ * conditions. If the clock is running too slowly, no sample delay is
+ * possible.
+ */
+ if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+ max_sample_delay_in_ns = 0;
+ else {
+ /*
+ * Compute the delay implied by the largest sample delay factor
+ * the NFC allows.
+ */
+ max_sample_delay_in_ns =
+ (nfc->max_sample_delay_factor * clock_period_in_ns) >>
+ dll_delay_shift;
+
+ /*
+ * Check if the implied sample delay larger than the NFC
+ * actually allows.
+ */
+ if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+ max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+ }
+
+ /*
+ * Check if improved timing information is available. If not, we have to
+ * use a less-sophisticated algorithm.
+ */
+ if (!improved_timing_is_available) {
+ /*
+ * Fold the read setup time required by the NFC into the ideal
+ * sample delay.
+ */
+ ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+ nfc->internal_data_setup_in_ns;
+
+ /*
+ * The ideal sample delay may be greater than the maximum
+ * allowed by the NFC. If so, we can trade off sample delay time
+ * for more data setup time.
+ *
+ * In each iteration of the following loop, we add a cycle to
+ * the data setup time and subtract a corresponding amount from
+ * the sample delay until we've satisified the constraints or
+ * can't do any better.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ data_setup_in_cycles++;
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds most closely
+ * to the ideal sample delay. If the result is too large for the
+ * NFC, use the maximum value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the
+ * sample delay factor. We do this because the form of the
+ * computation is the same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /* Skip to the part where we return our results. */
+ goto return_results;
+ }
+
+ /*
+ * If control arrives here, we have more detailed timing information,
+ * so we can use a better algorithm.
+ */
+
+ /*
+ * Fold the read setup time required by the NFC into the maximum
+ * propagation delay.
+ */
+ max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+ /*
+ * Earlier, we computed the number of clock cycles required to satisfy
+ * the data setup time. Now, we need to know the actual nanoseconds.
+ */
+ data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+ /*
+ * Compute tEYE, the width of the data eye when reading from the NAND
+ * Flash. The eye width is fundamentally determined by the data setup
+ * time, perturbed by propagation delays and some characteristics of the
+ * NAND Flash device.
+ *
+ * start of the eye = max_prop_delay + tREA
+ * end of the eye = min_prop_delay + tRHOH + data_setup
+ */
+ tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+ (int)data_setup_in_ns;
+
+ tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+ /*
+ * The eye must be open. If it's not, we can try to open it by
+ * increasing its main forcer, the data setup time.
+ *
+ * In each iteration of the following loop, we increase the data setup
+ * time by a single clock cycle. We do this until either the eye is
+ * open or we run into NFC limits.
+ */
+ while ((tEYE <= 0) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+ }
+
+ /*
+ * When control arrives here, the eye is open. The ideal time to sample
+ * the data is in the center of the eye:
+ *
+ * end of the eye + start of the eye
+ * --------------------------------- - data_setup
+ * 2
+ *
+ * After some algebra, this simplifies to the code immediately below.
+ */
+ ideal_sample_delay_in_ns =
+ ((int)max_prop_delay_in_ns +
+ (int)target.tREA_in_ns +
+ (int)min_prop_delay_in_ns +
+ (int)target.tRHOH_in_ns -
+ (int)data_setup_in_ns) >> 1;
+
+ /*
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *
+ * __ _____________________________________
+ * RDN \_________________/
+ *
+ * <---- tEYE ----->
+ * /-----------------\
+ * Read Data ----------------------------< >---------
+ * \-----------------/
+ * ^ ^ ^ ^
+ * | | | |
+ * |<--Data Setup -->|<--Delay Time -->| |
+ * | | | |
+ * | | |
+ * | |<-- Quantized Delay Time -->|
+ * | | |
+ *
+ *
+ * We have some issues we must now address:
+ *
+ * (1) The *ideal* sample delay time must not be negative. If it is, we
+ * jam it to zero.
+ *
+ * (2) The *ideal* sample delay time must not be greater than that
+ * allowed by the NFC. If it is, we can increase the data setup
+ * time, which will reduce the delay between the end of the data
+ * setup and the center of the eye. It will also make the eye
+ * larger, which might help with the next issue...
+ *
+ * (3) The *quantized* sample delay time must not fall either before the
+ * eye opens or after it closes (the latter is the problem
+ * illustrated in the above figure).
+ */
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * Extend the data setup as needed to reduce the ideal sample delay
+ * below the maximum permitted by the NFC.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds to the ideal sample
+ * delay. If the result is too large, then use the maximum allowed
+ * value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the sample
+ * delay factor. We do this because the form of the computation is the
+ * same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /*
+ * These macros conveniently encapsulate a computation we'll use to
+ * continuously evaluate whether or not the data sample delay is inside
+ * the eye.
+ */
+ #define IDEAL_DELAY ((int) ideal_sample_delay_in_ns)
+
+ #define QUANTIZED_DELAY \
+ ((int) ((sample_delay_factor * clock_period_in_ns) >> \
+ dll_delay_shift))
+
+ #define DELAY_ERROR (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+ #define SAMPLE_IS_NOT_WITHIN_THE_EYE (DELAY_ERROR > (tEYE >> 1))
+
+ /*
+ * While the quantized sample time falls outside the eye, reduce the
+ * sample delay or extend the data setup to move the sampling point back
+ * toward the eye. Do not allow the number of data setup cycles to
+ * exceed the maximum allowed by the NFC.
+ */
+ while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * outside the eye. Check if it's before the eye opens, or after
+ * the eye closes.
+ */
+ if (QUANTIZED_DELAY > IDEAL_DELAY) {
+ /*
+ * If control arrives here, the quantized sample delay
+ * falls after the eye closes. Decrease the quantized
+ * delay time and then go back to re-evaluate.
+ */
+ if (sample_delay_factor != 0)
+ sample_delay_factor--;
+ continue;
+ }
+
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * before the eye opens. Shift the sample point by increasing
+ * data setup time. This will also make the eye larger.
+ */
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* ...and one less period for the delay time. */
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * We have a new ideal sample delay, so re-compute the quantized
+ * delay.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+ }
+
+ /* Control arrives here when we're ready to return our results. */
+return_results:
+ hw->data_setup_in_cycles = data_setup_in_cycles;
+ hw->data_hold_in_cycles = data_hold_in_cycles;
+ hw->address_setup_in_cycles = address_setup_in_cycles;
+ hw->use_half_periods = dll_use_half_periods;
+ hw->sample_delay_factor = sample_delay_factor;
+
+ /* Return success. */
+ return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ unsigned char *gpmi_regs = r->gpmi_regs;
+ unsigned int clock_period_in_ns;
+ uint32_t reg;
+ unsigned int dll_wait_time_in_us;
+ struct gpmi_nfc_hardware_timing hw;
+ int ret;
+
+ /* Enable the clock. */
+ ret = clk_enable(r->clock);
+ if (ret) {
+ pr_err("We failed in enable the clk\n");
+ goto err_out;
+ }
+
+ /* set ready/busy timeout */
+ writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT,
+ gpmi_regs + HW_GPMI_TIMING1);
+
+ /* Get the timing information we need. */
+ nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
+ clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
+
+ gpmi_nfc_compute_hardware_timing(this, &hw);
+
+ /* Set up all the simple timing parameters. */
+ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+ BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ;
+
+ writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+ /*
+ * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD.
+ */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Clear out the DLL control fields. */
+ writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR);
+ writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* If no sample delay is called for, return immediately. */
+ if (!hw.sample_delay_factor)
+ return;
+
+ /* Configure the HALF_PERIOD flag. */
+ if (hw.use_half_periods)
+ writel(BM_GPMI_CTRL1_HALF_PERIOD,
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Set the delay factor. */
+ writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Enable the DLL. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+ * we can use the GPMI.
+ *
+ * Calculate the amount of time we need to wait, in microseconds.
+ */
+ dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+ if (!dll_wait_time_in_us)
+ dll_wait_time_in_us = 1;
+
+ /* Wait for the DLL to settle. */
+ udelay(dll_wait_time_in_us);
+
+err_out:
+ return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ clk_disable(r->clock);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+ struct resources *r = &this->resources;
+ uint32_t mask = 0;
+ uint32_t reg = 0;
+
+ if (GPMI_IS_MX23(this)) {
+ mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+ reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+ } else if (GPMI_IS_MX28(this)) {
+ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+ reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+ } else
+ pr_err("unknow arch.\n");
+ return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+ enum dma_ops_type type)
+{
+ this->last_dma_type = this->dma_type;
+ this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ int chip = this->current_chip;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+ pio[1] = pio[2] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+ sgl = &this->cmd_sgl;
+
+ sg_init_one(sgl, this->cmd_buffer, this->command_length);
+ dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel,
+ sgl, 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_COMMAND);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ uint32_t command_mode;
+ uint32_t address;
+ u32 pio[2];
+
+ /* [1] PIO */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send DMA request */
+ prepare_data_dma(this, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_WRITE_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[2];
+
+ /* [1] : send PIO */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] : send DMA request */
+ prepare_data_dma(this, DMA_FROM_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_FROM_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] : submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* A DMA descriptor that does an ECC page read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* [1] Wait for the chip to report ready. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] Enable the BCH block and read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] Disable the BCH block */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 3 error\n");
+ return -1;
+ }
+
+ /* [4] submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
new file mode 100644
index 000000000000..071b63420f0e
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -0,0 +1,1619 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpmi-nand.h"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+/* We will use all the (page + OOB). */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+ .eccbytes = 0,
+ .eccpos = { 0, },
+ .oobfree = { {.offset = 0, .length = 0} }
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+ struct gpmi_nand_data *this = cookie;
+
+ gpmi_clear_bch(this);
+ complete(&this->bch_done);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Calculate the ECC strength by hand:
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * O : the oobsize of the NAND chip.
+ * M : the metasize of per page.
+ *
+ * The formula is :
+ * E * G * N
+ * ------------ <= (O - M)
+ * 8
+ *
+ * So, we get E by:
+ * (O - M) * 8
+ * E <= -------------
+ * G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ int ecc_strength;
+
+ ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+ / (geo->gf_len * geo->ecc_chunk_count);
+
+ /* We need the minor even number. */
+ return round_down(ecc_strength, 2);
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int metadata_size;
+ unsigned int status_size;
+ unsigned int block_mark_bit_offset;
+
+ /*
+ * The size of the metadata can be changed, though we set it to 10
+ * bytes now. But it can't be too large, because we have to save
+ * enough space for BCH.
+ */
+ geo->metadata_size = 10;
+
+ /* The default for the length of Galois Field. */
+ geo->gf_len = 13;
+
+ /* The default for chunk size. There is no oobsize greater then 512. */
+ geo->ecc_chunk_size = 512;
+ while (geo->ecc_chunk_size < mtd->oobsize)
+ geo->ecc_chunk_size *= 2; /* keep C >= O */
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /* We use the same ECC strength for all chunks. */
+ geo->ecc_strength = get_ecc_strength(this);
+ if (!geo->ecc_strength) {
+ pr_err("We get a wrong ECC strength.\n");
+ return -EINVAL;
+ }
+
+ geo->page_size = mtd->writesize + mtd->oobsize;
+ geo->payload_size = mtd->writesize;
+
+ /*
+ * The auxiliary buffer contains the metadata and the ECC status. The
+ * metadata is padded to the nearest 32-bit boundary. The ECC status
+ * contains one byte for every ECC chunk, and is also padded to the
+ * nearest 32-bit boundary.
+ */
+ metadata_size = ALIGN(geo->metadata_size, 4);
+ status_size = ALIGN(geo->ecc_chunk_count, 4);
+
+ geo->auxiliary_size = metadata_size + status_size;
+ geo->auxiliary_status_offset = metadata_size;
+
+ if (!this->swap_block_mark)
+ return 0;
+
+ /*
+ * We need to compute the byte and bit offsets of
+ * the physical block mark within the ECC-based view of the page.
+ *
+ * NAND chip with 2K page shows below:
+ * (Block Mark)
+ * | |
+ * | D |
+ * |<---->|
+ * V V
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ * | M | data |E| data |E| data |E| data |E|
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * With the formula to compute the ECC strength, and the condition
+ * : C >= O (C is the ecc chunk size)
+ *
+ * It's easy to deduce to the following result:
+ *
+ * E * G (O - M) C - M C - M
+ * ----------- <= ------- <= -------- < ---------
+ * 8 N N (N - 1)
+ *
+ * So, we get:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M) < C
+ * 8
+ *
+ * The above inequality means the position of block mark
+ * within the ECC-based view of the page is still in the data chunk,
+ * and it's NOT in the ECC bits of the chunk.
+ *
+ * Use the following to compute the bit position of the
+ * physical block mark within the ECC-based view of the page:
+ * (page_size - D) * 8
+ *
+ * --Huang Shijie
+ */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return 0;
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+ int chipnr = this->current_chip;
+
+ return this->dma_chans[chipnr];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+ struct scatterlist *sgl = &this->data_sgl;
+ int ret;
+
+ this->direct_dma_map_ok = true;
+
+ /* first try to map the upper buffer directly */
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0) {
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf,
+ this->upper_len);
+
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0)
+ pr_err("map failed.\n");
+
+ this->direct_dma_map_ok = false;
+ }
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct completion *dma_c = &this->dma_done;
+
+ complete(dma_c);
+
+ switch (this->dma_type) {
+ case DMA_FOR_COMMAND:
+ dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (this->direct_dma_map_ok == false)
+ memcpy(this->upper_buf, this->data_buffer_dma,
+ this->upper_len);
+ break;
+
+ case DMA_FOR_WRITE_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_ECC_PAGE:
+ case DMA_FOR_WRITE_ECC_PAGE:
+ /* We have to wait the BCH interrupt to finish. */
+ break;
+
+ default:
+ pr_err("in wrong DMA operation.\n");
+ }
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *dma_c = &this->dma_done;
+ int err;
+
+ init_completion(dma_c);
+
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ dmaengine_submit(desc);
+
+ /* Wait for the interrupt from the DMA block. */
+ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ * [1] firstly the DMA interrupt and
+ * [2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *bch_c = &this->bch_done;
+ int err;
+
+ /* Prepare to receive an interrupt from the BCH block. */
+ init_completion(bch_c);
+
+ /* start the DMA */
+ start_dma_without_bch_irq(this, desc);
+
+ /* Wait for the interrupt from the BCH block. */
+ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int __devinit
+acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ struct resource *r;
+ void *p;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ p = ioremap(r->start, resource_size(r));
+ if (!p) {
+ pr_err("Can't remap %s\n", res_name);
+ return -ENOMEM;
+ }
+
+ if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+ res->gpmi_regs = p;
+ else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+ res->bch_regs = p;
+ else
+ pr_err("unknown resource name : %s\n", res_name);
+
+ return 0;
+}
+
+static void release_register_block(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ if (res->gpmi_regs)
+ iounmap(res->gpmi_regs);
+ if (res->bch_regs)
+ iounmap(res->bch_regs);
+ res->gpmi_regs = NULL;
+ res->bch_regs = NULL;
+}
+
+static int __devinit
+acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+ struct resource *r;
+ int err;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ err = request_irq(r->start, irq_h, 0, res_name, this);
+ if (err) {
+ pr_err("Can't own %s\n", res_name);
+ return err;
+ }
+
+ res->bch_low_interrupt = r->start;
+ res->bch_high_interrupt = r->end;
+ return 0;
+}
+
+static void release_bch_irq(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int i = res->bch_low_interrupt;
+
+ for (; i <= res->bch_high_interrupt; i++)
+ free_irq(i, this);
+}
+
+static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct resource *r = this->private;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+ /*
+ * only catch the GPMI dma channels :
+ * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
+ * (These four channels share the same IRQ!)
+ *
+ * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
+ * (These eight channels share the same IRQ!)
+ */
+ if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ chan->private = &this->dma_data;
+ return true;
+ }
+ return false;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+ unsigned int i;
+ for (i = 0; i < DMA_CHANS; i++)
+ if (this->dma_chans[i]) {
+ dma_release_channel(this->dma_chans[i]);
+ this->dma_chans[i] = NULL;
+ }
+}
+
+static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+{
+ struct platform_device *pdev = this->pdev;
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct resources *res = &this->resources;
+ struct resource *r, *r_dma;
+ unsigned int i;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME);
+ if (!r || !r_dma) {
+ pr_err("Can't get resource for DMA\n");
+ return -ENXIO;
+ }
+
+ /* used in gpmi_dma_filter() */
+ this->private = r;
+
+ for (i = r->start; i <= r->end; i++) {
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ if (i - r->start >= pdata->max_chip_count)
+ break;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* get the DMA interrupt */
+ if (r_dma->start == r_dma->end) {
+ /* only register the first. */
+ if (i == r->start)
+ this->dma_data.chan_irq = r_dma->start;
+ else
+ this->dma_data.chan_irq = NO_IRQ;
+ } else
+ this->dma_data.chan_irq = r_dma->start + (i - r->start);
+
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan)
+ goto acquire_err;
+
+ /* fill the first empty item */
+ this->dma_chans[i - r->start] = dma_chan;
+ }
+
+ res->dma_low_channel = r->start;
+ res->dma_high_channel = i;
+ return 0;
+
+acquire_err:
+ pr_err("Can't acquire DMA channel %u\n", i);
+ release_dma_channels(this);
+ return -EINVAL;
+}
+
+static int __devinit acquire_resources(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int ret;
+
+ ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_bch_irq(this, bch_irq);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_dma_channels(this);
+ if (ret)
+ goto exit_dma_channels;
+
+ res->clock = clk_get(&this->pdev->dev, NULL);
+ if (IS_ERR(res->clock)) {
+ pr_err("can not get the clock\n");
+ ret = -ENOENT;
+ goto exit_clock;
+ }
+ return 0;
+
+exit_clock:
+ release_dma_channels(this);
+exit_dma_channels:
+ release_bch_irq(this);
+exit_regs:
+ release_register_block(this);
+ return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+
+ clk_put(r->clock);
+ release_register_block(this);
+ release_bch_irq(this);
+ release_dma_channels(this);
+}
+
+static int __devinit init_hardware(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /*
+ * This structure contains the "safe" GPMI timing that should succeed
+ * with any NAND Flash device
+ * (although, with less-than-optimal performance).
+ */
+ struct nand_timing safe_timing = {
+ .data_setup_in_ns = 80,
+ .data_hold_in_ns = 60,
+ .address_setup_in_ns = 25,
+ .gpmi_sample_delay_in_ns = 6,
+ .tREA_in_ns = -1,
+ .tRLOH_in_ns = -1,
+ .tRHOH_in_ns = -1,
+ };
+
+ /* Initialize the hardwares. */
+ ret = gpmi_init(this);
+ if (ret)
+ return ret;
+
+ this->timing = safe_timing;
+ return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(destination)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(dev, destination,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, dest_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = destination;
+ *use_phys = dest_phys;
+ this->direct_dma_map_ok = true;
+ return 0;
+ }
+
+map_failed:
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ this->direct_dma_map_ok = false;
+ return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (this->direct_dma_map_ok)
+ dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (!this->direct_dma_map_ok)
+ memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(source)) {
+ dma_addr_t source_phys;
+
+ source_phys = dma_map_single(dev, (void *)source, length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, source_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = source;
+ *use_phys = source_phys;
+ return 0;
+ }
+map_failed:
+ /*
+ * Copy the content of the source buffer into the alternate
+ * buffer and set up the return values accordingly.
+ */
+ memcpy(alt_virt, source, length);
+
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void *used_virt, dma_addr_t used_phys)
+{
+ struct device *dev = this->dev;
+ if (used_virt == source)
+ dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+
+ if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+ dma_free_coherent(dev, this->page_buffer_size,
+ this->page_buffer_virt,
+ this->page_buffer_phys);
+ kfree(this->cmd_buffer);
+ kfree(this->data_buffer_dma);
+
+ this->cmd_buffer = NULL;
+ this->data_buffer_dma = NULL;
+ this->page_buffer_virt = NULL;
+ this->page_buffer_size = 0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct device *dev = this->dev;
+
+ /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->cmd_buffer == NULL)
+ goto error_alloc;
+
+ /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
+ this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->data_buffer_dma == NULL)
+ goto error_alloc;
+
+ /*
+ * [3] Allocate the page buffer.
+ *
+ * Both the payload buffer and the auxiliary buffer must appear on
+ * 32-bit boundaries. We presume the size of the payload buffer is a
+ * power of two and is much larger than four, which guarantees the
+ * auxiliary buffer will appear on a 32-bit boundary.
+ */
+ this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+ this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+ &this->page_buffer_phys, GFP_DMA);
+ if (!this->page_buffer_virt)
+ goto error_alloc;
+
+
+ /* Slice up the page buffer. */
+ this->payload_virt = this->page_buffer_virt;
+ this->payload_phys = this->page_buffer_phys;
+ this->auxiliary_virt = this->payload_virt + geo->payload_size;
+ this->auxiliary_phys = this->payload_phys + geo->payload_size;
+ return 0;
+
+error_alloc:
+ gpmi_free_dma_buffer(this);
+ pr_err("allocate DMA buffer ret!!\n");
+ return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will deassert
+ * both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+ */
+ if ((ctrl & (NAND_ALE | NAND_CLE))) {
+ if (data != NAND_CMD_NONE)
+ this->cmd_buffer[this->command_length++] = data;
+ return;
+ }
+
+ if (!this->command_length)
+ return;
+
+ ret = gpmi_send_command(this);
+ if (ret)
+ pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+
+ this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ if ((this->current_chip < 0) && (chipnr >= 0))
+ gpmi_begin(this);
+ else if ((this->current_chip >= 0) && (chipnr < 0))
+ gpmi_end(this);
+
+ this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = buf;
+ this->upper_len = len;
+
+ gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = (uint8_t *)buf;
+ this->upper_len = len;
+
+ gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ uint8_t *buf = this->data_buffer_dma;
+
+ gpmi_read_buf(mtd, buf, 1);
+ return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+ void *payload, void *auxiliary)
+{
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ unsigned char *p;
+ unsigned char *a;
+ unsigned int bit;
+ unsigned char mask;
+ unsigned char from_data;
+ unsigned char from_oob;
+
+ if (!this->swap_block_mark)
+ return;
+
+ /*
+ * If control arrives here, we're swapping. Make some convenience
+ * variables.
+ */
+ bit = nfc_geo->block_mark_bit_offset;
+ p = payload + nfc_geo->block_mark_byte_offset;
+ a = auxiliary;
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+ /* Get the byte from the OOB. */
+ from_oob = a[0];
+
+ /* Swap them. */
+ a[0] = from_data;
+
+ mask = (0x1 << bit) - 1;
+ p[0] = (p[0] & mask) | (from_oob << bit);
+
+ mask = ~0 << bit;
+ p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ void *payload_virt;
+ dma_addr_t payload_phys;
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ unsigned int i;
+ unsigned char *status;
+ unsigned int failed;
+ unsigned int corrected;
+ int ret;
+
+ pr_debug("page number is : %d\n", page);
+ ret = read_page_prepare(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate DMA buffer\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* go! */
+ ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+ read_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ if (ret) {
+ pr_err("Error in ECC-based read: %d\n", ret);
+ goto exit_nfc;
+ }
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ failed = 0;
+ corrected = 0;
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+ for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+ continue;
+
+ if (*status == STATUS_UNCORRECTABLE) {
+ failed++;
+ continue;
+ }
+ corrected += *status;
+ }
+
+ /*
+ * Propagate ECC status to the owning MTD only when failed or
+ * corrected times nearly reaches our ECC correction threshold.
+ */
+ if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+ }
+
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to th caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+exit_nfc:
+ return ret;
+}
+
+static void gpmi_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ const void *payload_virt;
+ dma_addr_t payload_phys;
+ const void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ int ret;
+
+ pr_debug("ecc write page.\n");
+ if (this->swap_block_mark) {
+ /*
+ * If control arrives here, we're doing block mark swapping.
+ * Since we can't modify the caller's buffers, we must copy them
+ * into our own.
+ */
+ memcpy(this->payload_virt, buf, mtd->writesize);
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi,
+ nfc_geo->auxiliary_size);
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* Handle block mark swapping. */
+ block_mark_swapping(this,
+ (void *) payload_virt, (void *) auxiliary_virt);
+ } else {
+ /*
+ * If control arrives here, we're not doing block mark swapping,
+ * so we can to try and use the caller's buffers.
+ */
+ ret = send_page_prepare(this,
+ buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate payload DMA buffer\n");
+ return;
+ }
+
+ ret = send_page_prepare(this,
+ chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ &auxiliary_virt, &auxiliary_phys);
+ if (ret) {
+ pr_err("Inadequate auxiliary DMA buffer\n");
+ goto exit_auxiliary;
+ }
+ }
+
+ /* Ask the NFC. */
+ ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+ if (ret)
+ pr_err("Error in ECC-based write: %d\n", ret);
+
+ if (!this->swap_block_mark) {
+ send_page_end(this, chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+ send_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("page number is %d\n", page);
+ /* clear the OOB buffer */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+
+ /* Read out the conventional OOB. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /*
+ * Now, we want to make sure the block mark is correct. In the
+ * Swapping/Raw case, we already have it. Otherwise, we need to
+ * explicitly read it.
+ */
+ if (!this->swap_block_mark) {
+ /* Read the block mark into the first byte of the OOB buffer. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ chip->oob_poi[0] = chip->read_byte(mtd);
+ }
+
+ /*
+ * Return true, indicating that the next call to this function must send
+ * a command.
+ */
+ return true;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ /*
+ * The BCH will use all the (page + oob).
+ * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
+ * But it can not stop some ioctls such MEMWRITEOOB which uses
+ * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
+ * these ioctls too.
+ */
+ return -EPERM;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int block, ret = 0;
+ uint8_t *block_mark;
+ int column, page, status, chipnr;
+
+ /* Get block number */
+ block = (int)(ofs >> chip->bbt_erase_shift);
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* Do we have a flash based bad block table ? */
+ if (chip->options & NAND_BBT_USE_FLASH)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ column = this->swap_block_mark ? mtd->writesize : 0;
+
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
+
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
+
+ chip->select_chip(mtd, -1);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+
+static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+ /*
+ * Set the boot block stride size.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->stride_size_in_pages = 64;
+
+ /*
+ * Set the search area stride exponent.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->search_area_stride_exponent = 2;
+ return 0;
+}
+
+static const char *fingerprint = "STMP";
+static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int search_area_size_in_strides;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int found_an_ncb_fingerprint = false;
+
+ /* Compute the number of strides in a search area. */
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Loop through the first search area, looking for the NCB fingerprint.
+ */
+ dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+ /*
+ * Read the NCB fingerprint. The fingerprint is four bytes long
+ * and starts in the 12th byte of the page.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+ chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+ /* Look for the fingerprint. */
+ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+ found_an_ncb_fingerprint = true;
+ break;
+ }
+
+ }
+
+ chip->select_chip(mtd, saved_chip_number);
+
+ if (found_an_ncb_fingerprint)
+ dev_dbg(dev, "\tFound a fingerprint\n");
+ else
+ dev_dbg(dev, "\tNo fingerprint found\n");
+ return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int block_size_in_pages;
+ unsigned int search_area_size_in_strides;
+ unsigned int search_area_size_in_pages;
+ unsigned int search_area_size_in_blocks;
+ unsigned int block;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int status;
+
+ /* Compute the search area geometry. */
+ block_size_in_pages = mtd->erasesize / mtd->writesize;
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+ search_area_size_in_pages = search_area_size_in_strides *
+ rom_geo->stride_size_in_pages;
+ search_area_size_in_blocks =
+ (search_area_size_in_pages + (block_size_in_pages - 1)) /
+ block_size_in_pages;
+
+ dev_dbg(dev, "Search Area Geometry :\n");
+ dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+ dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+ dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages);
+
+ /* Select chip 0. */
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /* Loop over blocks in the first search area, erasing them. */
+ dev_dbg(dev, "Erasing the search area...\n");
+
+ for (block = 0; block < search_area_size_in_blocks; block++) {
+ /* Compute the page address. */
+ page = block * block_size_in_pages;
+
+ /* Erase this block. */
+ dev_dbg(dev, "\tErasing block 0x%x\n", block);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ /* Wait for the erase to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Erase failed.\n", __func__);
+ }
+
+ /* Write the NCB fingerprint into the page buffer. */
+ memset(buffer, ~0, mtd->writesize);
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+ /* Loop through the first search area, writing NCB fingerprints. */
+ dev_dbg(dev, "Writing NCB fingerprints...\n");
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ /* Write the first page of the current stride. */
+ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.write_page_raw(mtd, chip, buffer);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Wait for the write to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Write failed.\n", __func__);
+ }
+
+ /* Deselect chip 0. */
+ chip->select_chip(mtd, saved_chip_number);
+ return 0;
+}
+
+static int __devinit mx23_boot_init(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int block_count;
+ unsigned int block;
+ int chipnr;
+ int page;
+ loff_t byte;
+ uint8_t block_mark;
+ int ret = 0;
+
+ /*
+ * If control arrives here, we can't use block mark swapping, which
+ * means we're forced to use transcription. First, scan for the
+ * transcription stamp. If we find it, then we don't have to do
+ * anything -- the block marks are already transcribed.
+ */
+ if (mx23_check_transcription_stamp(this))
+ return 0;
+
+ /*
+ * If control arrives here, we couldn't find a transcription stamp, so
+ * so we presume the block marks are in the conventional location.
+ */
+ dev_dbg(dev, "Transcribing bad block marks...\n");
+
+ /* Compute the number of blocks in the entire medium. */
+ block_count = chip->chipsize >> chip->phys_erase_shift;
+
+ /*
+ * Loop over all the blocks in the medium, transcribing block marks as
+ * we go.
+ */
+ for (block = 0; block < block_count; block++) {
+ /*
+ * Compute the chip, page and byte addresses for this block's
+ * conventional mark.
+ */
+ chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+ page = block << (chip->phys_erase_shift - chip->page_shift);
+ byte = block << chip->phys_erase_shift;
+
+ /* Send the command to read the conventional block mark. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ block_mark = chip->read_byte(mtd);
+ chip->select_chip(mtd, -1);
+
+ /*
+ * Check if the block is marked bad. If so, we need to mark it
+ * again, but this time the result will be a mark in the
+ * location where we transcribe block marks.
+ */
+ if (block_mark != 0xff) {
+ dev_dbg(dev, "Transcribing mark in block %u\n", block);
+ ret = chip->block_markbad(mtd, byte);
+ if (ret)
+ dev_err(dev, "Failed to mark block bad with "
+ "ret %d\n", ret);
+ }
+ }
+
+ /* Write the stamp that indicates we've transcribed the block marks. */
+ mx23_write_transcription_stamp(this);
+ return 0;
+}
+
+static int __devinit nand_boot_init(struct gpmi_nand_data *this)
+{
+ nand_boot_set_geometry(this);
+
+ /* This is ROM arch-specific initilization before the BBT scanning. */
+ if (GPMI_IS_MX23(this))
+ return mx23_boot_init(this);
+ return 0;
+}
+
+static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Free the temporary DMA memory for reading ID. */
+ gpmi_free_dma_buffer(this);
+
+ /* Set up the NFC geometry which is used by BCH. */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ pr_err("set geometry ret : %d\n", ret);
+ return ret;
+ }
+
+ /* Alloc the new DMA buffers according to the pagesize and oobsize */
+ return gpmi_alloc_dma_buffer(this);
+}
+
+static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ if (GPMI_IS_MX23(this))
+ this->swap_block_mark = false;
+ else
+ this->swap_block_mark = true;
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
+ if (ret)
+ return ret;
+
+ /* NAND boot init, depends on the gpmi_set_geometry(). */
+ return nand_boot_init(this);
+}
+
+static int gpmi_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /* Prepare for the BBT scan. */
+ ret = gpmi_pre_bbt_scan(this);
+ if (ret)
+ return ret;
+
+ /* use the default BBT implementation */
+ return nand_default_bbt(mtd);
+}
+
+void gpmi_nfc_exit(struct gpmi_nand_data *this)
+{
+ nand_release(&this->mtd);
+ gpmi_free_dma_buffer(this);
+}
+
+static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ int ret;
+
+ /* init current chip */
+ this->current_chip = -1;
+
+ /* init the MTD data structures */
+ mtd->priv = chip;
+ mtd->name = "gpmi-nand";
+ mtd->owner = THIS_MODULE;
+
+ /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+ chip->priv = this;
+ chip->select_chip = gpmi_select_chip;
+ chip->cmd_ctrl = gpmi_cmd_ctrl;
+ chip->dev_ready = gpmi_dev_ready;
+ chip->read_byte = gpmi_read_byte;
+ chip->read_buf = gpmi_read_buf;
+ chip->write_buf = gpmi_write_buf;
+ chip->ecc.read_page = gpmi_ecc_read_page;
+ chip->ecc.write_page = gpmi_ecc_write_page;
+ chip->ecc.read_oob = gpmi_ecc_read_oob;
+ chip->ecc.write_oob = gpmi_ecc_write_oob;
+ chip->scan_bbt = gpmi_scan_bbt;
+ chip->badblock_pattern = &gpmi_bbt_descr;
+ chip->block_markbad = gpmi_block_markbad;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 1;
+ chip->ecc.layout = &gpmi_hw_ecclayout;
+
+ /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
+ this->bch_geometry.payload_size = 1024;
+ this->bch_geometry.auxiliary_size = 128;
+ ret = gpmi_alloc_dma_buffer(this);
+ if (ret)
+ goto err_out;
+
+ ret = nand_scan(mtd, pdata->max_chip_count);
+ if (ret) {
+ pr_err("Chip scan failed\n");
+ goto err_out;
+ }
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata->partitions, pdata->partition_count);
+ if (ret)
+ goto err_out;
+ return 0;
+
+err_out:
+ gpmi_nfc_exit(this);
+ return ret;
+}
+
+static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+{
+ struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct gpmi_nand_data *this;
+ int ret;
+
+ this = kzalloc(sizeof(*this), GFP_KERNEL);
+ if (!this) {
+ pr_err("Failed to allocate per-device memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, this);
+ this->pdev = pdev;
+ this->dev = &pdev->dev;
+ this->pdata = pdata;
+
+ if (pdata->platform_init) {
+ ret = pdata->platform_init();
+ if (ret)
+ goto platform_init_error;
+ }
+
+ ret = acquire_resources(this);
+ if (ret)
+ goto exit_acquire_resources;
+
+ ret = init_hardware(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ ret = gpmi_nfc_init(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ return 0;
+
+exit_nfc_init:
+ release_resources(this);
+platform_init_error:
+exit_acquire_resources:
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return ret;
+}
+
+static int __exit gpmi_nand_remove(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+ gpmi_nfc_exit(this);
+ release_resources(this);
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return 0;
+}
+
+static const struct platform_device_id gpmi_ids[] = {
+ {
+ .name = "imx23-gpmi-nand",
+ .driver_data = IS_MX23,
+ }, {
+ .name = "imx28-gpmi-nand",
+ .driver_data = IS_MX28,
+ }, {},
+};
+
+static struct platform_driver gpmi_nand_driver = {
+ .driver = {
+ .name = "gpmi-nand",
+ },
+ .probe = gpmi_nand_probe,
+ .remove = __exit_p(gpmi_nand_remove),
+ .id_table = gpmi_ids,
+};
+
+static int __init gpmi_nand_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&gpmi_nand_driver);
+ if (err == 0)
+ printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n");
+ else
+ pr_err("i.MX GPMI NAND driver registration failed\n");
+ return err;
+}
+
+static void __exit gpmi_nand_exit(void)
+{
+ platform_driver_unregister(&gpmi_nand_driver);
+}
+
+module_init(gpmi_nand_init);
+module_exit(gpmi_nand_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
new file mode 100644
index 000000000000..e023bccb7781
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -0,0 +1,273 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+struct resources {
+ void *gpmi_regs;
+ void *bch_regs;
+ unsigned int bch_low_interrupt;
+ unsigned int bch_high_interrupt;
+ unsigned int dma_low_channel;
+ unsigned int dma_high_channel;
+ struct clk *clock;
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len: The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength: A number that describes the strength of the ECC
+ * algorithm.
+ * @page_size: The size, in bytes, of a physical page, including
+ * both data and OOB.
+ * @metadata_size: The size, in bytes, of the metadata.
+ * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
+ * the first chunk in the page includes both data and
+ * metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count: The number of ECC chunks in the page,
+ * @payload_size: The size, in bytes, of the payload buffer.
+ * @auxiliary_size: The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset: The offset into the auxiliary buffer at which
+ * the ECC status appears.
+ * @block_mark_byte_offset: The byte offset in the ECC-based page view at
+ * which the underlying physical block mark appears.
+ * @block_mark_bit_offset: The bit offset into the ECC-based page view at
+ * which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+ unsigned int gf_len;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int metadata_size;
+ unsigned int ecc_chunk_size;
+ unsigned int ecc_chunk_count;
+ unsigned int payload_size;
+ unsigned int auxiliary_size;
+ unsigned int auxiliary_status_offset;
+ unsigned int block_mark_byte_offset;
+ unsigned int block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages: The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ * search area in boot block strides.
+ */
+struct boot_rom_geometry {
+ unsigned int stride_size_in_pages;
+ unsigned int search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+ DMA_FOR_COMMAND = 1,
+ DMA_FOR_READ_DATA,
+ DMA_FOR_WRITE_DATA,
+ DMA_FOR_READ_ECC_PAGE,
+ DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
+ * maximum of tDS and tWP. A negative value
+ * indicates this characteristic isn't known.
+ * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
+ * maximum of tDH, tWH and tREH. A negative value
+ * indicates this characteristic isn't known.
+ * @address_setup_in_ns: The address setup time, in nanoseconds. Usually
+ * the maximum of tCLS, tCS and tALS. A negative
+ * value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
+ * indicates this characteristic isn't known.
+ * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ */
+struct nand_timing {
+ int8_t data_setup_in_ns;
+ int8_t data_hold_in_ns;
+ int8_t address_setup_in_ns;
+ int8_t gpmi_sample_delay_in_ns;
+ int8_t tREA_in_ns;
+ int8_t tRLOH_in_ns;
+ int8_t tRHOH_in_ns;
+};
+
+struct gpmi_nand_data {
+ /* System Interface */
+ struct device *dev;
+ struct platform_device *pdev;
+ struct gpmi_nand_platform_data *pdata;
+
+ /* Resources */
+ struct resources resources;
+
+ /* Flash Hardware */
+ struct nand_timing timing;
+
+ /* BCH */
+ struct bch_geometry bch_geometry;
+ struct completion bch_done;
+
+ /* NAND Boot issue */
+ bool swap_block_mark;
+ struct boot_rom_geometry rom_geometry;
+
+ /* MTD / NAND */
+ struct nand_chip nand;
+ struct mtd_info mtd;
+
+ /* General-use Variables */
+ int current_chip;
+ unsigned int command_length;
+
+ /* passed from upper layer */
+ uint8_t *upper_buf;
+ int upper_len;
+
+ /* for DMA operations */
+ bool direct_dma_map_ok;
+
+ struct scatterlist cmd_sgl;
+ char *cmd_buffer;
+
+ struct scatterlist data_sgl;
+ char *data_buffer_dma;
+
+ void *page_buffer_virt;
+ dma_addr_t page_buffer_phys;
+ unsigned int page_buffer_size;
+
+ void *payload_virt;
+ dma_addr_t payload_phys;
+
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+
+ /* DMA channels */
+#define DMA_CHANS 8
+ struct dma_chan *dma_chans[DMA_CHANS];
+ struct mxs_dma_data dma_data;
+ enum dma_ops_type last_dma_type;
+ enum dma_ops_type dma_type;
+ struct completion dma_done;
+
+ /* private */
+ void *private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles: The data setup time, in cycles.
+ * @data_hold_in_cycles: The data hold time, in cycles.
+ * @address_setup_in_cycles: The address setup time, in cycles.
+ * @use_half_periods: Indicates the clock is running slowly, so the
+ * NFC DLL should use half-periods.
+ * @sample_delay_factor: The sample delay factor.
+ */
+struct gpmi_nfc_hardware_timing {
+ uint8_t data_setup_in_cycles;
+ uint8_t data_hold_in_cycles;
+ uint8_t address_setup_in_cycles;
+ bool use_half_periods;
+ uint8_t sample_delay_factor;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles: The maximum number of data setup cycles that
+ * can be expressed in the hardware.
+ * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
+ * for data read internal setup. In the Reference
+ * Manual, see the chapter "High-Speed NAND
+ * Timing" for more details.
+ * @max_sample_delay_factor: The maximum sample delay factor that can be
+ * expressed in the hardware.
+ * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
+ * sample delay DLL hardware can possibly work
+ * with (the DLL is unusable with longer periods).
+ * If the full-cycle period is greater than HALF
+ * this value, the DLL must be configured to use
+ * half-periods.
+ * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
+ * DLL can implement.
+ * @clock_frequency_in_hz: The clock frequency, in Hz, during the current
+ * I/O transaction. If no I/O transaction is in
+ * progress, this is the clock frequency during
+ * the most recent I/O transaction.
+ */
+struct timing_threshod {
+ const unsigned int max_chip_count;
+ const unsigned int max_data_setup_cycles;
+ const unsigned int internal_data_setup_in_ns;
+ const unsigned int max_sample_delay_factor;
+ const unsigned int max_dll_clock_period_in_ns;
+ const unsigned int max_dll_delay_in_ns;
+ unsigned long clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+ enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD 0x00
+#define STATUS_ERASED 0xff
+#define STATUS_UNCORRECTABLE 0xfe
+
+/* Use the platform_id to distinguish different Archs. */
+#define IS_MX23 0x1
+#define IS_MX28 0x2
+#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
+#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
new file mode 100644
index 000000000000..83431240e2f2
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -0,0 +1,172 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0 0x00000000
+#define HW_GPMI_CTRL0_SET 0x00000004
+#define HW_GPMI_CTRL0_CLR 0x00000008
+#define HW_GPMI_CTRL0_TOG 0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
+ (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
+
+/*
+ * Difference in LOCK_CS between imx23 and imx28 :
+ * This bit may impact the _POWER_ consumption. So some chips
+ * do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
+#define LOCK_CS_ENABLE 0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS 20
+#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
+ (GPMI_IS_MX23((x)) \
+ ? MX23_BM_GPMI_CTRL0_CS \
+ : MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v) \
+ (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v) \
+ (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE 0x00000010
+
+#define HW_GPMI_ECCCTRL 0x00000020
+#define HW_GPMI_ECCCTRL_SET 0x00000024
+#define HW_GPMI_ECCCTRL_CLR 0x00000028
+#define HW_GPMI_ECCCTRL_TOG 0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
+ (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
+ (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
+
+#define HW_GPMI_ECCCOUNT 0x00000030
+#define HW_GPMI_PAYLOAD 0x00000040
+#define HW_GPMI_AUXILIARY 0x00000050
+#define HW_GPMI_CTRL1 0x00000060
+#define HW_GPMI_CTRL1_SET 0x00000064
+#define HW_GPMI_CTRL1_CLR 0x00000068
+#define HW_GPMI_CTRL1_TOG 0x0000006c
+
+#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE 17
+#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD 16
+#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v) \
+ (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define HW_GPMI_TIMING0 0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1 0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
+
+#define HW_GPMI_TIMING2 0x00000090
+#define HW_GPMI_DATA 0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT 0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY 24
+#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
+ (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG 0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0 28
+#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 02a03e67109c..5dc6f0d92f1a 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -81,9 +81,6 @@ static int h1910_device_ready(struct mtd_info *mtd)
static int __init h1910_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *nandaddr;
if (!machine_is_h1900())
@@ -136,22 +133,10 @@ static int __init h1910_init(void)
iounmap((void *)nandaddr);
return -ENXIO;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 6e813daed068..e2664073a89b 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -251,10 +251,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
return 0;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = {"cmdline", NULL};
-#endif
-
static int jz_nand_ioremap_resource(struct platform_device *pdev,
const char *name, struct resource **res, void __iomem **base)
{
@@ -299,8 +295,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
struct nand_chip *chip;
struct mtd_info *mtd;
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
- struct mtd_partition *partition_info;
- int num_partitions = 0;
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
if (!nand) {
@@ -373,15 +367,9 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
goto err_gpio_free;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partition_info, 0);
-#endif
- if (num_partitions <= 0 && pdata) {
- num_partitions = pdata->num_partitions;
- partition_info = pdata->partitions;
- }
- ret = mtd_device_register(mtd, partition_info, num_partitions);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
if (ret) {
dev_err(&pdev->dev, "Failed to add mtd device\n");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index eb1fbac63eb6..5ede64706346 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -131,8 +131,6 @@ struct mpc5121_nfc_prv {
static void mpc5121_nfc_done(struct mtd_info *mtd);
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-
/* Read NFC register */
static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
{
@@ -656,13 +654,13 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
struct mpc5121_nfc_prv *prv;
struct resource res;
struct mtd_info *mtd;
- struct mtd_partition *parts;
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
+ struct mtd_part_parser_data ppdata;
/*
* Check SoC revision. This driver supports only NFC
@@ -727,6 +725,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
}
mtd->name = "MPC5121 NAND";
+ ppdata.of_node = dn;
chip->dev_ready = mpc5121_nfc_dev_ready;
chip->cmdfunc = mpc5121_nfc_command;
chip->read_byte = mpc5121_nfc_read_byte;
@@ -735,7 +734,8 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
@@ -837,19 +837,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
dev_set_drvdata(dev, mtd);
/* Register device in MTD */
- retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
- if (retval == 0)
- retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
- if (retval < 0) {
- dev_err(dev, "Error parsing MTD partitions!\n");
- devm_free_irq(dev, prv->irq, mtd);
- retval = -EINVAL;
- goto error;
- }
-
- retval = mtd_device_register(mtd, parts, retval);
+ retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (retval) {
dev_err(dev, "Error adding MTD device!\n");
devm_free_irq(dev, prv->irq, mtd);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 90df34c4d26c..74a43b818d0e 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -41,7 +41,7 @@
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53())
#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
@@ -143,7 +143,6 @@
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *parts;
struct device *dev;
void *spare0;
@@ -350,8 +349,7 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
- __func__);
+ pr_debug("%s: INT not set\n", __func__);
}
}
@@ -371,7 +369,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -387,8 +385,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
- __func__);
+ pr_debug("%s: RESET failed\n", __func__);
} else {
/* Wait for operation to complete */
wait_op_done(host, useirq);
@@ -411,7 +408,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
* a NAND command. */
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
writew(addr, NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -561,8 +558,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
return -1;
}
@@ -849,7 +845,7 @@ static void preset_v1_v2(struct mtd_info *mtd)
writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
} else if (nfc_is_v1()) {
writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
@@ -932,8 +928,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
/* Reset command state information */
@@ -1044,7 +1039,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- int err = 0, __maybe_unused nr_parts = 0;
+ int err = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
@@ -1179,7 +1174,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
}
init_completion(&host->op_completion);
@@ -1231,16 +1226,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
}
/* Register the partitions */
- nr_parts =
- parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
- if (nr_parts > 0)
- mtd_device_register(mtd, host->parts, nr_parts);
- else if (pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else {
- pr_info("Registering %s as whole device\n", mtd->name);
- mtd_device_register(mtd, NULL, 0);
- }
+ mtd_device_parse_register(mtd, part_probes, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, host);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a46e9bb847bd..3ed9c5e4d34e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -21,7 +21,7 @@
* TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
- * if we have HW ecc support.
+ * if we have HW ECC support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
* BBT table is not serialized, has to be fixed
@@ -113,21 +113,19 @@ static int check_offs_len(struct mtd_info *mtd,
/* Start address must align on block boundary */
if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ pr_debug("%s: unaligned address\n", __func__);
ret = -EINVAL;
}
/* Length must align on block boundary */
if (len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
- __func__);
+ pr_debug("%s: length not block aligned\n", __func__);
ret = -EINVAL;
}
/* Do not allow past end of device */
if (ofs + len > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
- __func__);
+ pr_debug("%s: past end of device\n", __func__);
ret = -EINVAL;
}
@@ -136,9 +134,9 @@ static int check_offs_len(struct mtd_info *mtd,
/**
* nand_release_device - [GENERIC] release chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
@@ -157,9 +155,9 @@ static void nand_release_device(struct mtd_info *mtd)
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
*/
static uint8_t nand_read_byte(struct mtd_info *mtd)
{
@@ -169,10 +167,11 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
/**
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd: MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
*
- * Default read function for 16bit buswith with
- * endianess conversion
*/
static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
@@ -182,10 +181,9 @@ static uint8_t nand_read_byte16(struct mtd_info *mtd)
/**
* nand_read_word - [DEFAULT] read one word from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
@@ -195,8 +193,8 @@ static u16 nand_read_word(struct mtd_info *mtd)
/**
* nand_select_chip - [DEFAULT] control CE line
- * @mtd: MTD device structure
- * @chipnr: chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
@@ -218,11 +216,11 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
/**
* nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
*/
static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -235,11 +233,11 @@ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -252,11 +250,11 @@ static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
/**
* nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
*/
static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -271,11 +269,11 @@ static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
*/
static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -291,11 +289,11 @@ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
*/
static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -310,11 +308,11 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
/**
* nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
*/
static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -332,9 +330,9 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
@@ -344,7 +342,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -384,11 +382,11 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
/**
* nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -396,7 +394,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int block, ret, i = 0;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
@@ -404,33 +402,31 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
+ /* Do we have a flash based bad block table? */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
+ struct mtd_oob_ops ops;
+
nand_get_device(chip, mtd, FL_WRITING);
- /* Write to first two pages and to byte 1 and 6 if necessary.
- * If we write to more than one location, the first error
- * encountered quits the procedure. We write two bytes per
- * location, so we dont have to mess with 16 bit access.
+ /*
+ * Write to first two pages if necessary. If we write to more
+ * than one location, the first error encountered quits the
+ * procedure. We write two bytes per location, so we dont have
+ * to mess with 16 bit access.
*/
+ ops.len = ops.ooblen = 2;
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos & ~0x01;
+ ops.mode = MTD_OPS_PLACE_OOB;
do {
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
-
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ ret = nand_do_write_oob(mtd, ofs, &ops);
- if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
- chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
- & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
- }
i++;
ofs += mtd->writesize;
- } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
i < 2);
nand_release_device(mtd);
@@ -443,16 +439,16 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/**
* nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd: MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
*
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
*/
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* broken xD cards report WP despite being writable */
+ /* Broken xD cards report WP despite being writable */
if (chip->options & NAND_BROKEN_XD)
return 0;
@@ -463,10 +459,10 @@ static int nand_check_wp(struct mtd_info *mtd)
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
- * @allowbbt: 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
@@ -485,8 +481,8 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
/**
* panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
*
* Helper function for nand_wait_ready used when needing to wait in interrupt
* context.
@@ -505,10 +501,7 @@ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
}
}
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -519,7 +512,7 @@ void nand_wait_ready(struct mtd_info *mtd)
return panic_nand_wait_ready(mtd, 400);
led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
+ /* Wait until command is processed or timeout occurs */
do {
if (chip->dev_ready(mtd))
break;
@@ -531,13 +524,13 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
* nand_command - [DEFAULT] Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
*/
static void nand_command(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -545,9 +538,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /*
- * Write out the command to the device.
- */
+ /* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
int readcmd;
@@ -567,9 +558,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
}
chip->cmd_ctrl(mtd, command, ctrl);
- /*
- * Address cycle, when necessary
- */
+ /* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
/* Serially input address */
if (column != -1) {
@@ -590,8 +579,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
*/
switch (command) {
@@ -625,8 +614,10 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
return;
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -634,14 +625,14 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
/**
* nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
* Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -683,8 +674,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status, sequential in, and deplete1 need no delay
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
*/
switch (command) {
@@ -698,14 +689,12 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
+ /* Read error status commands require only a short delay */
udelay(chip->chip_delay);
return;
@@ -739,7 +728,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
default:
/*
* If we don't have access to the busy pin, we apply the given
- * command delay
+ * command delay.
*/
if (!chip->dev_ready) {
udelay(chip->chip_delay);
@@ -747,8 +736,10 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -756,25 +747,25 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Used when in panic, no locks are taken.
*/
static void panic_nand_get_device(struct nand_chip *chip,
struct mtd_info *mtd, int new_state)
{
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
chip->controller->active = chip;
chip->state = new_state;
}
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
@@ -812,10 +803,10 @@ retry:
}
/**
- * panic_nand_wait - [GENERIC] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
- * @timeo: Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
*
* Wait for command done. This is a helper function for nand_wait used when
* we are in interrupt context. May happen when in panic and trying to write
@@ -838,13 +829,13 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
@@ -859,8 +850,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
led_trigger_event(nand_led_trigger, LED_FULL);
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
ndelay(100);
if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
@@ -890,16 +883,15 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
/**
* __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * when = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
*
- * return - unlock status
+ * Returs unlock status.
*/
static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
uint64_t len, int invert)
@@ -919,10 +911,9 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
}
@@ -932,12 +923,11 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
/**
* nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - unlock status
+ * Returns unlock status.
*/
int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
@@ -945,7 +935,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
int chipnr;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
@@ -964,7 +954,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
ret = -EIO;
goto out;
@@ -981,18 +971,16 @@ EXPORT_SYMBOL(nand_unlock);
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
*
- * This feature is not supported in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks, not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
*/
int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
@@ -1000,7 +988,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
int chipnr, status, page;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
@@ -1015,7 +1003,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
status = MTD_ERASE_FAILED;
ret = -EIO;
@@ -1028,10 +1016,9 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
goto out;
@@ -1047,13 +1034,13 @@ out:
EXPORT_SYMBOL(nand_lock);
/**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1064,11 +1051,11 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
@@ -1107,11 +1094,11 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
}
/**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1148,12 +1135,12 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @data_offs: offset of requested data within the page
- * @readlen: data length
- * @bufpoi: buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
@@ -1166,12 +1153,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
- /* Column address wihin the page aligned to ECC size (256bytes). */
+ /* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
- /* Data size aligned to ECC ecc.size*/
+ /* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
eccfrag_len = num_steps * chip->ecc.bytes;
@@ -1183,13 +1170,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
p = bufpoi + data_col_addr;
chip->read_buf(mtd, p, datafrag_len);
- /* Calculate ECC */
+ /* Calculate ECC */
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
- /* The performance is faster if to position offsets
- according to ecc.pos. Let make sure here that
- there are no gaps in ecc positions */
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
@@ -1201,8 +1189,10 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
} else {
- /* send the command to read the particular ecc bytes */
- /* take care about buswidth alignment in read_buf */
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
index = start_step * chip->ecc.bytes;
aligned_pos = eccpos[index] & ~(busw - 1);
@@ -1235,13 +1225,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1280,18 +1270,17 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
@@ -1329,14 +1318,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
}
/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1384,29 +1373,29 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip: nand chip structure
- * @oob: oob destination address
- * @ops: oob ops structure
- * @len: size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0 ? */
+ /* Read request not from offset 0? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
roffs -= free->length;
@@ -1432,11 +1421,10 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
}
/**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
@@ -1451,7 +1439,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
@@ -1473,7 +1461,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
- /* Is the current page in the buffer ? */
+ /* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
@@ -1483,7 +1471,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
}
/* Now read the page into the buffer */
- if (unlikely(ops->mode == MTD_OOB_RAW))
+ if (unlikely(ops->mode == MTD_OPS_RAW))
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
@@ -1492,14 +1480,22 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
- if (ret < 0)
+ if (ret < 0) {
+ if (!aligned)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
break;
+ }
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed))
+ !(mtd->ecc_stats.failed - stats.failed) &&
+ (ops->mode != MTD_OPS_RAW))
chip->pagebuf = realpage;
+ else
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
@@ -1539,7 +1535,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (!readlen)
break;
- /* For subsequent reads align to page boundary. */
+ /* For subsequent reads align to page boundary */
col = 0;
/* Increment page address */
realpage++;
@@ -1552,8 +1548,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
@@ -1574,18 +1571,19 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/**
* nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
*
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -1596,13 +1594,14 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
nand_get_device(chip, mtd, FL_READING);
- chip->ops.len = len;
- chip->ops.datbuf = buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_read_ops(mtd, from, &chip->ops);
+ ret = nand_do_read_ops(mtd, from, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
@@ -1610,11 +1609,11 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
@@ -1628,12 +1627,12 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
* with syndromes
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
@@ -1667,10 +1666,10 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page)
@@ -1690,11 +1689,11 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- * with syndrome - only for large page flash !
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
@@ -1749,34 +1748,37 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
}
/**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
*
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
*/
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
int page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ pr_debug("%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_AUTO)
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
- "outside oob\n", __func__);
+ pr_debug("%s: attempt to start read outside oob\n",
+ __func__);
return -EINVAL;
}
@@ -1784,8 +1786,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
- "of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
@@ -1797,7 +1799,10 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
page = realpage & chip->pagemask;
while (1) {
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ if (ops->mode == MTD_OPS_RAW)
+ sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+ else
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
@@ -1830,24 +1835,29 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
ops->oobretlen = ops->ooblen;
- return 0;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
* nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
*/
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
@@ -1859,17 +1869,17 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
- "beyond end of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_READING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -1888,12 +1898,12 @@ out:
/**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1903,10 +1913,10 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
@@ -1942,10 +1952,10 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
chip->write_buf(mtd, oob, size);
}
/**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1957,7 +1967,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *p = buf;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Software ecc calculation */
+ /* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1968,10 +1978,10 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1996,13 +2006,13 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static void nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf)
@@ -2041,12 +2051,12 @@ static void nand_write_page_syndrome(struct mtd_info *mtd,
/**
* nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @buf: the data to write
- * @page: page number to write
- * @cached: cached programming
- * @raw: use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int page, int cached, int raw)
@@ -2061,8 +2071,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.write_page(mtd, chip, buf);
/*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
*/
cached = 0;
@@ -2072,7 +2082,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
- * available
+ * available.
*/
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
status = chip->errstat(mtd, chip, FL_WRITING, status,
@@ -2096,29 +2106,37 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip: nand chip structure
- * @oob: oob data buffer
- * @len: oob data write length
- * @ops: oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0 ? */
+ /* Write request not from offset 0? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
woffs -= free->length;
@@ -2146,12 +2164,12 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2161,7 +2179,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *oob = ops->oobbuf;
@@ -2172,10 +2190,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
+ /* Reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "%s: Attempt to write not "
- "page aligned data\n", __func__);
+ pr_notice("%s: attempt to write non page aligned data\n",
+ __func__);
return -EINVAL;
}
@@ -2201,10 +2219,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- /* If we're not given explicit OOB data, let it be 0xFF */
- if (likely(!oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
@@ -2214,7 +2228,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
- /* Partial page write ? */
+ /* Partial page write? */
if (unlikely(column || writelen < (mtd->writesize - 1))) {
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
@@ -2226,12 +2240,15 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (unlikely(oob)) {
size_t len = min(oobwritelen, oobmaxlen);
- oob = nand_fill_oob(chip, oob, len, ops);
+ oob = nand_fill_oob(mtd, oob, len, ops);
oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
}
ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OOB_RAW));
+ (ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -2260,11 +2277,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
/**
* panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* NAND write with ECC. Used when performing writes in interrupt context, this
* may for example be called by mtdoops when writing an oops while in panic.
@@ -2273,6 +2290,7 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -2281,36 +2299,38 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
if (!len)
return 0;
- /* Wait for the device to get ready. */
+ /* Wait for the device to get ready */
panic_nand_wait(mtd, chip, 400);
- /* Grab the device. */
+ /* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
return ret;
}
/**
* nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -2321,13 +2341,14 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
@@ -2336,11 +2357,11 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
/**
* nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
- * NAND write out-of-band
+ * NAND write out-of-band.
*/
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2348,24 +2369,24 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
- "past end of page\n", __func__);
+ pr_debug("%s: attempt to write past end of page\n",
+ __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
- "write outside oob\n", __func__);
+ pr_debug("%s: attempt to start write outside oob\n",
+ __func__);
return -EINVAL;
}
@@ -2374,8 +2395,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
@@ -2401,10 +2422,12 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
if (page == chip->pagebuf)
chip->pagebuf = -1;
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
- memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
@@ -2416,9 +2439,9 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2430,17 +2453,17 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_WRITING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -2458,11 +2481,11 @@ out:
}
/**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2473,12 +2496,11 @@ static void single_erase_cmd(struct mtd_info *mtd, int page)
}
/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
*/
static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2493,10 +2515,10 @@ static void multi_erase_cmd(struct mtd_info *mtd, int page)
/**
* nand_erase - [MTD Interface] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
@@ -2505,12 +2527,12 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
- * @allowbbt: allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
@@ -2521,9 +2543,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)instr->addr,
- (unsigned long long)instr->len);
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
@@ -2545,8 +2567,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
- __func__);
+ pr_debug("%s: device is write protected!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2555,7 +2577,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
* If BBT requires refresh, set the BBT page mask to see if the BBT
* should be rewritten. Otherwise the mask is set to 0xffffffff which
* can not be matched. This is also done when the bbt is actually
- * erased to avoid recusrsive updates
+ * erased to avoid recursive updates.
*/
if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
@@ -2566,20 +2588,18 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
instr->state = MTD_ERASING;
while (len) {
- /*
- * heck if we have a bad block, we do not erase bad blocks !
- */
+ /* Heck if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "%s: attempt to erase a bad block "
- "at page 0x%08x\n", __func__, page);
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/*
* Invalidate the page cache, if we erase the block which
- * contains the current cached page
+ * contains the current cached page.
*/
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
@@ -2599,8 +2619,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
- "page 0x%08x\n", __func__, page);
+ pr_debug("%s: failed erase, page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
@@ -2609,7 +2629,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/*
* If BBT requires refresh, set the BBT rewrite flag to the
- * page being erased
+ * page being erased.
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
@@ -2628,7 +2648,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/*
* If BBT requires refresh and BBT-PERCHIP, set the BBT
- * page mask to see if this BBT should be rewritten
+ * page mask to see if this BBT should be rewritten.
*/
if (bbt_masked_page != 0xffffffff &&
(chip->bbt_td->options & NAND_BBT_PERCHIP))
@@ -2651,7 +2671,7 @@ erase_exit:
/*
* If BBT requires refresh and erase was successful, rewrite any
- * selected bad block tables
+ * selected bad block tables.
*/
if (bbt_masked_page == 0xffffffff || ret)
return ret;
@@ -2659,10 +2679,10 @@ erase_exit:
for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
if (!rewrite_bbt[chipnr])
continue;
- /* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
- rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
+ /* Update the BBT for chip */
+ pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+ __func__, chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
@@ -2672,15 +2692,15 @@ erase_exit:
/**
* nand_sync - [MTD Interface] sync
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
*/
static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
@@ -2690,8 +2710,8 @@ static void nand_sync(struct mtd_info *mtd)
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd: MTD device structure
- * @offs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
@@ -2704,8 +2724,8 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
/**
* nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -2714,7 +2734,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
ret = nand_block_isbad(mtd, ofs);
if (ret) {
- /* If it was bad already, return success and do nothing. */
+ /* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
@@ -2725,7 +2745,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static int nand_suspend(struct mtd_info *mtd)
{
@@ -2736,7 +2756,7 @@ static int nand_suspend(struct mtd_info *mtd)
/**
* nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static void nand_resume(struct mtd_info *mtd)
{
@@ -2745,13 +2765,11 @@ static void nand_resume(struct mtd_info *mtd)
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "%s called for a chip which is not "
- "in suspended state\n", __func__);
+ pr_err("%s called for a chip which is not in suspended state\n",
+ __func__);
}
-/*
- * Set default functions
- */
+/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
/* check for proper chip_delay setup, set 20us if not */
@@ -2793,23 +2811,21 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
}
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
static void sanitize_string(uint8_t *s, size_t len)
{
ssize_t i;
- /* null terminate */
+ /* Null terminate */
s[len - 1] = 0;
- /* remove non printable chars */
+ /* Remove non printable chars */
for (i = 0; i < len - 1; i++) {
if (s[i] < ' ' || s[i] > 127)
s[i] = '?';
}
- /* remove trailing spaces */
+ /* Remove trailing spaces */
strim(s);
}
@@ -2826,28 +2842,28 @@ static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
}
/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int busw)
+ int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
int i;
int val;
- /* try ONFI for unknow chip or LP */
+ /* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- printk(KERN_INFO "ONFI flash detected\n");
+ pr_info("ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- printk(KERN_INFO "ONFI param page %d valid\n", i);
+ pr_info("ONFI param page %d valid\n", i);
break;
}
}
@@ -2855,7 +2871,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
if (i == 3)
return 0;
- /* check version */
+ /* Check version */
val = le16_to_cpu(p->revision);
if (val & (1 << 5))
chip->onfi_version = 23;
@@ -2871,8 +2887,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->onfi_version = 0;
if (!chip->onfi_version) {
- printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
- __func__, val);
+ pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
return 0;
}
@@ -2884,9 +2899,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
- busw = 0;
+ *busw = 0;
if (le16_to_cpu(p->features) & 1)
- busw = NAND_BUSWIDTH_16;
+ *busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= (NAND_NO_READRDY |
@@ -2896,7 +2911,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
}
/*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Get the flash and manufacturer id and lookup if the type is supported.
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
@@ -2913,7 +2928,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
- * after power-up
+ * after power-up.
*/
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
@@ -2924,7 +2939,8 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
*maf_id = chip->read_byte(mtd);
*dev_id = chip->read_byte(mtd);
- /* Try again to make sure, as some systems the bus-hold or other
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
* possibly credible NAND flash to appear. If the two results do
* not match, ignore the device completely.
@@ -2936,9 +2952,9 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- printk(KERN_INFO "%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ pr_info("%s: second ID read did not match "
+ "%02x,%02x against %02x,%02x\n", __func__,
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
@@ -2952,7 +2968,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
- ret = nand_flash_detect_onfi(mtd, chip, busw);
+ ret = nand_flash_detect_onfi(mtd, chip, &busw);
if (ret)
goto ident_done;
}
@@ -2973,7 +2989,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->chipsize = (uint64_t)type->chipsize << 20;
if (!type->pagesize && chip->init_size) {
- /* set the pagesize, oobsize, erasesize by the driver*/
+ /* Set the pagesize, oobsize, erasesize by the driver */
busw = chip->init_size(mtd, chip, id_data);
} else if (!type->pagesize) {
int extid;
@@ -3033,7 +3049,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
}
} else {
/*
- * Old devices have chip data hardcoded in the device id table
+ * Old devices have chip data hardcoded in the device id table.
*/
mtd->erasesize = type->erasesize;
mtd->writesize = type->pagesize;
@@ -3043,7 +3059,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Check for Spansion/AMD ID + repeating 5th, 6th byte since
* some Spansion chips have erasesize that conflicts with size
- * listed in nand_ids table
+ * listed in nand_ids table.
* Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
*/
if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
@@ -3057,15 +3073,16 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
*/
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
/*
- * Set chip as a default. Board drivers can override it, if necessary
+ * Set chip as a default. Board drivers can override it, if necessary.
*/
chip->options |= NAND_NO_AUTOINCR;
@@ -3077,21 +3094,21 @@ ident_done:
/*
* Check, if buswidth is correct. Hardware drivers should set
- * chip correct !
+ * chip correct!
*/
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
- printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
- (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
+ pr_info("NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
return ERR_PTR(-EINVAL);
}
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
- /* Convert chipsize to number of pages per chip -1. */
+ /* Convert chipsize to number of pages per chip -1 */
chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
@@ -3121,7 +3138,7 @@ ident_done:
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BBT_SCANLASTPAGE;
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX ||
@@ -3129,17 +3146,7 @@ ident_done:
*maf_id == NAND_MFR_AMD)) ||
(mtd->writesize == 2048 &&
*maf_id == NAND_MFR_MICRON))
- chip->options |= NAND_BBT_SCAN2NDPAGE;
-
- /*
- * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
- */
- if (!(busw & NAND_BUSWIDTH_16) &&
- *maf_id == NAND_MFR_STMICRO &&
- mtd->writesize == 2048) {
- chip->options |= NAND_BBT_SCANBYTE1AND6;
- chip->badblockpos = 0;
- }
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
@@ -3147,12 +3154,11 @@ ident_done:
else
chip->erase_cmd = single_erase_cmd;
- /* Do not replace user supplied command function ! */
+ /* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- /* TODO onfi flash name */
- printk(KERN_INFO "NAND device: Manufacturer ID:"
+ pr_info("NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name);
@@ -3162,12 +3168,12 @@ ident_done:
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- * @table: Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
*
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
@@ -3189,7 +3195,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
- printk(KERN_WARNING "No NAND device found.\n");
+ pr_warn("No NAND device found\n");
chip->select_chip(mtd, -1);
return PTR_ERR(type);
}
@@ -3207,7 +3213,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
break;
}
if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
+ pr_info("%d NAND chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
chip->numchips = i;
@@ -3220,11 +3226,11 @@ EXPORT_SYMBOL(nand_scan_ident);
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
{
@@ -3240,7 +3246,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * If no default placement scheme is given, select an appropriate one
+ * If no default placement scheme is given, select an appropriate one.
*/
if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
@@ -3257,8 +3263,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.layout = &nand_oob_128;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
}
@@ -3267,7 +3273,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->write_page = nand_write_page;
/*
- * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
@@ -3276,15 +3282,15 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
+ /* Use standard hwecc read page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
@@ -3305,11 +3311,11 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
- /* Use standard syndrome read/write page function ? */
+ /* Use standard syndrome read/write page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
@@ -3325,9 +3331,9 @@ int nand_scan_tail(struct mtd_info *mtd)
if (mtd->writesize >= chip->ecc.size)
break;
- printk(KERN_WARNING "%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
chip->ecc.mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@@ -3347,7 +3353,7 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
chip->ecc.calculate = nand_bch_calculate_ecc;
@@ -3362,8 +3368,8 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
- * for details.
- * Otherwise, default to 4 bits for large page devices
+ * for details. Otherwise, default to 4 bits for large page
+ * devices.
*/
if (!chip->ecc.size && (mtd->oobsize >= 64)) {
chip->ecc.size = 512;
@@ -3374,14 +3380,14 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.bytes,
&chip->ecc.layout);
if (!chip->ecc.priv) {
- printk(KERN_WARNING "BCH ECC initialization failed!\n");
+ pr_warn("BCH ECC initialization failed!\n");
BUG();
}
break;
case NAND_ECC_NONE:
- printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. "
+ "This is not recommended!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
@@ -3393,14 +3399,19 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
default:
- printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
- chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
BUG();
}
+ /* For many systems, the standard OOB write also works for raw */
+ if (!chip->ecc.read_oob_raw)
+ chip->ecc.read_oob_raw = chip->ecc.read_oob;
+ if (!chip->ecc.write_oob_raw)
+ chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
/*
* The number of bytes available for a client to place data into
- * the out of band area
+ * the out of band area.
*/
chip->ecc.layout->oobavail = 0;
for (i = 0; chip->ecc.layout->oobfree[i].length
@@ -3411,19 +3422,16 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* Set the number of read / write steps for one page depending on ECC
- * mode
+ * mode.
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
- printk(KERN_WARNING "Invalid ecc parameters\n");
+ pr_warn("Invalid ECC parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /*
- * Allow subpage writes up to ecc.steps. Not possible for MLC
- * FLASH.
- */
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
switch (chip->ecc.steps) {
@@ -3481,9 +3489,11 @@ int nand_scan_tail(struct mtd_info *mtd)
}
EXPORT_SYMBOL(nand_scan_tail);
-/* is_module_text_address() isn't exported, and it's mostly a pointless
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
* test if this is a module _anyway_ -- they'd have to try _really_ hard
- * to call us from in-kernel code if the core NAND support is modular. */
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
#ifdef MODULE
#define caller_is_module() (1)
#else
@@ -3493,15 +3503,13 @@ EXPORT_SYMBOL(nand_scan_tail);
/**
* nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
*
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
{
@@ -3509,8 +3517,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
- __func__);
+ pr_crit("%s called with NULL mtd->owner!\n", __func__);
BUG();
}
@@ -3523,8 +3530,8 @@ EXPORT_SYMBOL(nand_scan);
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 4165857752ca..69148ae3bf58 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -14,7 +14,7 @@
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
@@ -36,9 +36,9 @@
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
@@ -81,17 +81,15 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @len: the length of buffer to search
- * @paglen: the pagelength
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
int i, end = 0;
@@ -110,32 +108,8 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
p += end;
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
-
- /* Check both positions 1 and 6 for pattern? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += NAND_SMALL_BADBLOCK_POS - td->offs;
- /* Check region between positions 1 and 6 */
- for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
- i++) {
- if (*p++ != 0xff)
- return -1;
- }
- }
- else {
- p += NAND_SMALL_BADBLOCK_POS - td->offs;
- }
- /* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(p, td->pattern, td->len))
+ return -1;
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
@@ -150,14 +124,13 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
*
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
int i;
@@ -168,21 +141,14 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
if (p[td->offs + i] != td->pattern[i])
return -1;
}
- /* Need to check location 1 AND 6? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- for (i = 0; i < td->len; i++) {
- if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
- return -1;
- }
- }
return 0;
}
/**
* add_marker_len - compute the length of the marker in data area
- * @td: BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
*
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
*/
static u32 add_marker_len(struct nand_bbt_descr *td)
{
@@ -199,34 +165,33 @@ static u32 add_marker_len(struct nand_bbt_descr *td)
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @page: the starting page
- * @num: the number of bbt descriptors to read
- * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
*
* Read the bad block table starting from page.
- *
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
struct nand_bbt_descr *td, int offs)
{
- int res, i, j, act = 0;
+ int res, ret = 0, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
int bits = td->options & NAND_BBT_NRBITS_MSK;
- uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
u32 marker_len;
int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
marker_len = add_marker_len(td);
- from = ((loff_t) page) << this->page_shift;
+ from = ((loff_t)page) << this->page_shift;
while (totlen) {
- len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
if (marker_len) {
/*
* In case the BBT marker is not in the OOB area it
@@ -238,11 +203,18 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
}
res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
- if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
@@ -253,17 +225,19 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
- /* Leave it for now, if its matured we can move this
- * message to MTD_DEBUG_LEVEL0 */
- printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /*
+ * Leave it for now, if it's matured we can
+ * move this message to pr_debug.
+ */
+ pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ /* Factory marked bad or worn out? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
@@ -274,20 +248,20 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
totlen -= len;
from += len;
}
- return 0;
+ return ret;
}
/**
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @chip: read the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
*
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
@@ -313,9 +287,7 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
return 0;
}
-/*
- * BBT marker is in the first page, no OOB.
- */
+/* BBT marker is in the first page, no OOB */
static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
struct nand_bbt_descr *td)
{
@@ -329,35 +301,26 @@ static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
return mtd->read(mtd, offs, len, &retlen, buf);
}
-/*
- * Scan read raw data from flash
- */
+/* Scan read raw data from flash */
static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
-
while (len > 0) {
- if (len <= mtd->writesize) {
- ops.oobbuf = buf + len;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
- } else {
- ops.oobbuf = buf + mtd->writesize;
- ops.datbuf = buf;
- ops.len = mtd->writesize;
- res = mtd->read_oob(mtd, offs, &ops);
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
- if (res)
- return res;
- }
+ res = mtd->read_oob(mtd, offs, &ops);
+
+ if (res)
+ return res;
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
@@ -374,15 +337,13 @@ static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
return scan_read_raw_oob(mtd, buf, offs, len);
}
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
uint8_t *buf, uint8_t *oob)
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = buf;
@@ -403,15 +364,14 @@ static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
@@ -422,8 +382,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
mtd->writesize, td);
td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- td->pages[0], td->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
@@ -431,15 +391,13 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
mtd->writesize, td);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- md->pages[0], md->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
return 1;
}
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, size_t readlen,
int scanlen, int len)
@@ -447,7 +405,8 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
int ret, j;
ret = scan_read_raw_oob(mtd, buf, offs, readlen);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
for (j = 0; j < len; j++, buf += scanlen) {
@@ -457,9 +416,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
return 0;
}
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, int len)
{
@@ -470,16 +427,16 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < len; j++) {
/*
- * Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit
- * buswidth
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
*/
ret = mtd->read_oob(mtd, offs, &ops);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
if (check_short_pattern(buf, bd))
@@ -492,14 +449,14 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
- * @chip: create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
*
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
*/
static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
@@ -510,7 +467,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
loff_t from;
size_t readlen;
- printk(KERN_INFO "Scanning device for bad blocks\n");
+ pr_info("Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
@@ -530,14 +487,16 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2
- * below as it makes shifting and masking less painful */
+ /*
+ * Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful
+ */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
return -EINVAL;
}
@@ -547,7 +506,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BBT_SCANLASTPAGE)
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
@@ -566,8 +525,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
- i >> 1, (unsigned long long)from);
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
+ i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
@@ -579,20 +538,18 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
/**
* search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
*
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
*/
static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
@@ -603,7 +560,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
- /* Search direction top -> down ? */
+ /* Search direction top -> down? */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
@@ -612,7 +569,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
dir = 1;
}
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
bbtblocks = this->chipsize >> this->bbt_erase_shift;
@@ -651,23 +608,23 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+ pr_warn("Bad block table not found for chip %d\n", i);
else
- printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
- td->version[i]);
+ pr_info("Bad block table found at page %d, version "
+ "0x%02X\n", td->pages[i], td->version[i]);
}
return 0;
}
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Search and read the bad block table(s)
-*/
+ * Search and read the bad block table(s).
+ */
static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
@@ -683,16 +640,14 @@ static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt
/**
* write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
*
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
- * @chipsel: selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
@@ -711,14 +666,14 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
if (!rcode)
rcode = 0xff;
- /* Write bad block table per chip rather than per device ? */
+ /* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
@@ -732,8 +687,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
+ /*
+ * There was already a version of the table, reuse the page
* This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
@@ -742,8 +697,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
goto write;
}
- /* Automatic placement of the bad block table */
- /* Search direction top -> down ? */
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = numblocks * (chip + 1) - 1;
dir = -1;
@@ -767,7 +724,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (!md || md->pages[chip] != page)
goto write;
}
- printk(KERN_ERR "No space left to write bad block table\n");
+ pr_err("No space left to write bad block table\n");
return -ENOSPC;
write:
@@ -792,24 +749,22 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
bbtoffs = chip * (numblocks >> 2);
- to = ((loff_t) page) << this->page_shift;
+ to = ((loff_t)page) << this->page_shift;
- /* Must we save the block contents ? */
+ /* Must we save the block contents? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
- to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+ to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error "
- "reading block for writing "
- "the bad block table\n");
+ pr_info("nand_bbt: error reading block "
+ "for writing the bad block table\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error "
- "while reading block for writing "
- "bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading "
+ "block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -822,19 +777,19 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
} else if (td->options & NAND_BBT_NO_OOB) {
ooboffs = 0;
offs = td->len;
- /* the version byte */
+ /* The version byte */
if (td->options & NAND_BBT_VERSION)
offs++;
/* Calc length */
- len = (size_t) (numblocks >> sft);
+ len = (size_t)(numblocks >> sft);
len += offs;
- /* Make it page aligned ! */
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len);
@@ -842,8 +797,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
- len = (size_t) (numblocks >> sft);
- /* Make it page aligned ! */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
@@ -857,13 +812,13 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (td->options & NAND_BBT_VERSION)
buf[ooboffs + td->veroffs] = td->version[chip];
- /* walk through the memory table */
+ /* Walk through the memory table */
for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
- /* Do not store the reserved bbt blocks ! */
+ /* Do not store the reserved bbt blocks! */
buf[offs + (i >> sft)] &=
~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
@@ -884,8 +839,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
- "0x%02X\n", (unsigned long long)to, td->version[chip]);
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
@@ -893,19 +848,18 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
return 0;
outerr:
- printk(KERN_WARNING
- "nand_bbt: Error while writing bad block table %d\n", res);
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
return res;
}
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -916,25 +870,24 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
- int i, chips, writeops, chipsel, res;
+ int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *td = this->bbt_td;
struct nand_bbt_descr *md = this->bbt_md;
struct nand_bbt_descr *rd, *rd2;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
else
@@ -942,86 +895,98 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
for (i = 0; i < chips; i++) {
writeops = 0;
+ create = 0;
rd = NULL;
rd2 = NULL;
- /* Per chip or per device ? */
+ res = res2 = 0;
+ /* Per chip or per device? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table available ? */
+ /* Mirrored table available? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
writeops = 0x03;
- goto create;
- }
-
- if (td->pages[i] == -1) {
+ } else if (td->pages[i] == -1) {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
- goto writecheck;
- }
-
- if (md->pages[i] == -1) {
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
- goto writecheck;
- }
-
- if (td->version[i] == md->version[i]) {
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
rd = td;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
- goto writecheck;
- }
-
- if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
+ writeops = 0x02;
} else {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
+ writeops = 0x01;
}
-
- goto writecheck;
-
} else {
if (td->pages[i] == -1) {
+ create = 1;
writeops = 0x01;
- goto create;
+ } else {
+ rd = td;
}
- rd = td;
- goto writecheck;
}
- create:
- /* Create the bad block table by scanning the device ? */
- if (!(td->options & NAND_BBT_CREATE))
- continue;
- /* Create the table in memory by scanning the chip(s) */
- if (!(this->options & NAND_CREATE_EMPTY_BBT))
- create_bbt(mtd, buf, bd, chipsel);
-
- td->version[i] = 1;
- if (md)
- md->version[i] = 1;
- writecheck:
- /* read back first ? */
- if (rd)
- read_abs_bbt(mtd, buf, rd, chipsel);
- /* If they weren't versioned, read both. */
- if (rd2)
- read_abs_bbt(mtd, buf, rd2, chipsel);
-
- /* Write the bad block table to the device ? */
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
+
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
+
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
- /* Write the mirror bad block table to the device ? */
+ /* Write the mirror bad block table to the device? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
@@ -1033,20 +998,19 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
/**
* mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd: MTD device structure
- * @td: bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
*
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
uint8_t oldval, newval;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
@@ -1083,9 +1047,11 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
update = 1;
block += 2;
}
- /* If we want reserved blocks to be recorded to flash, and some
- new ones have been marked, then we need to update the stored
- bbts. This should only happen once. */
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
if (update && td->reserved_block_code)
nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
}
@@ -1093,8 +1059,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
/**
* verify_bbt_descr - verify the bad block description
- * @mtd: MTD device structure
- * @bd: the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
*
* This functions performs a few sanity checks on the bad block description
* table.
@@ -1112,16 +1078,16 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
@@ -1141,18 +1107,16 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
- *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
*
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -1162,19 +1126,21 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) and clear the memory bad block table */
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
this->bbt = kzalloc(len, GFP_KERNEL);
- if (!this->bbt) {
- printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+ if (!this->bbt)
return -ENOMEM;
- }
- /* If no primary table decriptor is given, scan the device
- * to build a memory based bad block table
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
kfree(this->bbt);
this->bbt = NULL;
}
@@ -1188,13 +1154,12 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
len += (len >> this->page_shift) * mtd->oobsize;
buf = vmalloc(len);
if (!buf) {
- printk(KERN_ERR "nand_bbt: Out of memory\n");
kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
- /* Is the bbt at a given page ? */
+ /* Is the bbt at a given page? */
if (td->options & NAND_BBT_ABSPAGE) {
res = read_abs_bbts(mtd, buf, td, md);
} else {
@@ -1216,15 +1181,15 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd: MTD device structure
- * @offs: the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
*
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
- int len, res = 0, writeops = 0;
+ int len, res = 0;
int chip, chipsel;
uint8_t *buf;
struct nand_bbt_descr *td = this->bbt_td;
@@ -1237,14 +1202,10 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
buf = kmalloc(len, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+ if (!buf)
return -ENOMEM;
- }
-
- writeops = md != NULL ? 0x03 : 0x01;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chip = (int)(offs >> this->chip_shift);
chipsel = chip;
@@ -1257,14 +1218,14 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
if (md)
md->version[chip]++;
- /* Write the bad block table to the device ? */
- if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
- /* Write the mirror bad block table to the device ? */
- if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
}
@@ -1273,8 +1234,10 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
return res;
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
@@ -1286,8 +1249,7 @@ static struct nand_bbt_descr agand_flashbased = {
.pattern = scan_agand_pattern
};
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1331,31 +1293,27 @@ static struct nand_bbt_descr bbt_mirror_no_bbt_descr = {
.pattern = mirror_pattern
};
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
- NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
/**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
*
* This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
* this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
* passed to this function.
- *
*/
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
{
struct nand_bbt_descr *bd;
if (this->badblock_pattern) {
- printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ pr_warn("Bad block pattern already allocated; not replacing\n");
return -EINVAL;
}
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd) {
- printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ if (!bd)
return -ENOMEM;
- }
- bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
bd->offs = this->badblockpos;
bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
bd->pattern = scan_ff_pattern;
@@ -1366,22 +1324,20 @@ static int nand_create_default_bbt_descr(struct nand_chip *this)
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd: MTD device structure
- *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
+ * @mtd: MTD device structure
*
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
- /* Default for AG-AND. We must use a flash based
- * bad block table as the devices have factory marked
- * _good_ blocks. Erasing those blocks leads to loss
- * of the good / bad information, so we _must_ store
- * this information in a good / bad table during
- * startup
+ /*
+ * Default for AG-AND. We must use a flash based bad block table as the
+ * devices have factory marked _good_ blocks. Erasing those blocks
+ * leads to loss of the good / bad information, so we _must_ store this
+ * information in a good / bad table during startup.
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
@@ -1389,15 +1345,15 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}
- /* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
this->bbt_td = &bbt_main_no_bbt_descr;
this->bbt_md = &bbt_mirror_no_bbt_descr;
} else {
@@ -1411,18 +1367,17 @@ int nand_default_bbt(struct mtd_info *mtd)
}
if (!this->badblock_pattern)
- nand_create_default_bbt_descr(this);
+ nand_create_badblock_pattern(this);
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd: MTD device structure
- * @offs: offset in the device
- * @allowbbt: allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
@@ -1433,8 +1388,9 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+ "(block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index 0f931e757116..3803e0bba23b 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -93,8 +93,8 @@ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
/* else error in ecc, no action needed */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
- __func__, errloc[i]);
+ pr_debug("%s: corrected bitflip %u\n", __func__,
+ errloc[i]);
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 271b8e735e8f..b7cfe0d37121 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -110,7 +110,7 @@ static const char bitsperbyte[256] = {
/*
* addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
* this is only used for repairing parity
* see the comments in nand_correct_data for more details
*/
@@ -153,7 +153,7 @@ static const char addressbits[256] = {
* __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
* block
* @buf: input buffer with raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
* @code: output buffer with ECC
*/
void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
@@ -348,7 +348,7 @@ void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
rp17 = (par ^ rp16) & 0xff;
/*
- * Finally calculate the ecc bits.
+ * Finally calculate the ECC bits.
* Again here it might seem that there are performance optimisations
* possible, but benchmarks showed that on the system this is developed
* the code below is the fastest
@@ -436,7 +436,7 @@ EXPORT_SYMBOL(nand_calculate_ecc);
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
*
* Detect and correct a 1 bit error for eccsize byte block
*/
@@ -505,7 +505,7 @@ int __nand_correct_data(unsigned char *buf,
}
/* count nr of bits; use table lookup, faster than calculating it */
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
+ return 1; /* error in ECC data; no action needed */
printk(KERN_ERR "uncorrectable error : ");
return -1;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 357e8c5252a8..34c03be77301 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2273,9 +2273,9 @@ static int __init ns_init_module(void)
switch (bbt) {
case 2:
- chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
case 0:
break;
default:
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index ea2dea8a9c88..ee1713907b92 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -42,7 +42,6 @@ struct ndfc_controller {
struct nand_chip chip;
int chip_select;
struct nand_hw_control ndfc_control;
- struct mtd_partition *parts;
};
static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
@@ -159,13 +158,9 @@ static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
static int ndfc_chip_init(struct ndfc_controller *ndfc,
struct device_node *node)
{
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_types[] = { "cmdlinepart", NULL };
-#else
- static const char *part_types[] = { NULL };
-#endif
struct device_node *flash_np;
struct nand_chip *chip = &ndfc->chip;
+ struct mtd_part_parser_data ppdata;
int ret;
chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
@@ -193,6 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
if (!flash_np)
return -ENODEV;
+ ppdata->of_node = flash_np;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
@@ -204,18 +200,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
if (ret)
goto err;
- ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
- &ndfc->parts);
- if (ret < 0)
- goto err;
- }
-
- ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret);
+ ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
@@ -288,6 +273,7 @@ static int __devexit ndfc_remove(struct platform_device *ofdev)
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
nand_release(&ndfc->mtd);
+ kfree(ndfc->mtd.name);
return 0;
}
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index b6a5c86ab31e..b463ecfb4c1a 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -187,6 +187,7 @@ static int nomadik_nand_remove(struct platform_device *pdev)
pdata->exit();
if (host) {
+ nand_release(&host->mtd);
iounmap(host->cmd_va);
iounmap(host->data_va);
iounmap(host->addr_va);
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 9c30a0b03171..fa8faedfad6e 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -339,6 +339,7 @@ static int __devexit nuc900_nand_remove(struct platform_device *pdev)
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
+ nand_release(&nuc900_nand->mtd);
iounmap(nuc900_nand->reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ec22a5aab038..f745f00f3167 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -95,8 +95,6 @@
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
@@ -115,7 +113,6 @@ struct omap_nand_info {
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct nand_chip nand;
struct platform_device *pdev;
@@ -745,12 +742,12 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
case 1:
/* Uncorrectable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ pr_debug("ECC UNCORRECTED_ERROR 1\n");
return -1;
case 11:
/* UN-Correctable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+ pr_debug("ECC UNCORRECTED_ERROR B\n");
return -1;
case 12:
@@ -767,8 +764,8 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
- DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
- "offset: %d, bit: %d\n", find_byte, find_bit);
+ pr_debug("Correcting single bit ECC error at offset: "
+ "%d, bit: %d\n", find_byte, find_bit);
page_data[find_byte] ^= (1 << find_bit);
@@ -780,7 +777,7 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
ecc_data2[2] == 0)
return 0;
}
- DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ pr_debug("UNCORRECTED_ERROR default\n");
return -1;
}
}
@@ -1104,13 +1101,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
goto out_release_mem_region;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- mtd_device_register(&info->mtd, NULL, 0);
+ mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, &info->mtd);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 7794d0680f91..29f505adaf84 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -21,8 +21,6 @@
#include <mach/hardware.h>
#include <plat/orion_nand.h>
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd->priv;
@@ -81,8 +79,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *io_base;
int ret = 0;
- struct mtd_partition *partitions = NULL;
- int num_part = 0;
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
@@ -132,17 +128,9 @@ static int __init orion_nand_probe(struct platform_device *pdev)
goto no_dev;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "orion_nand";
- num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
- /* If cmdline partitions have been passed, let them be used */
- if (num_part <= 0) {
- num_part = board->nr_parts;
- partitions = board->parts;
- }
-
- ret = mtd_device_register(mtd, partitions, num_part);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ board->parts, board->nr_parts);
if (ret) {
nand_release(mtd);
goto no_dev;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index b1aa41b8a4eb..a97264ececdb 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -155,7 +155,8 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 633c04bf76f6..ea8e1234e0e2 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -21,8 +21,6 @@ struct plat_nand_data {
struct nand_chip chip;
struct mtd_info mtd;
void __iomem *io_base;
- int nr_parts;
- struct mtd_partition *parts;
};
/*
@@ -79,6 +77,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
data->chip.read_buf = pdata->ctrl.read_buf;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
data->chip.ecc.layout = pdata->chip.ecclayout;
@@ -99,23 +98,9 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
goto out;
}
- if (pdata->chip.part_probe_types) {
- err = parse_mtd_partitions(&data->mtd,
- pdata->chip.part_probe_types,
- &data->parts, 0);
- if (err > 0) {
- mtd_device_register(&data->mtd, data->parts, err);
- return 0;
- }
- }
- if (pdata->chip.set_parts)
- pdata->chip.set_parts(data->mtd.size, &pdata->chip);
- if (pdata->chip.partitions) {
- data->parts = pdata->chip.partitions;
- err = mtd_device_register(&data->mtd, data->parts,
- pdata->chip.nr_partitions);
- } else
- err = mtd_device_register(&data->mtd, NULL, 0);
+ err = mtd_device_parse_register(&data->mtd,
+ pdata->chip.part_probe_types, 0,
+ pdata->chip.partitions, pdata->chip.nr_partitions);
if (!err)
return err;
@@ -145,8 +130,6 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_release(&data->mtd);
- if (data->parts && data->parts != pdata->chip.partitions)
- kfree(data->parts);
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
iounmap(data->io_base);
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 3bbb796b451c..7e52af51a198 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -99,8 +99,6 @@ static struct mtd_partition partition_info_evb[] = {
#define NUM_PARTITIONS 1
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-
/*
* hardware specific access to control-lines
*/
@@ -187,18 +185,12 @@ static int ppchameleonevb_device_ready(struct mtd_info *minfo)
}
#endif
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __init ppchameleonevb_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *ppchameleon_fio_base;
void __iomem *ppchameleonevb_fio_base;
@@ -281,24 +273,13 @@ static int __init ppchameleonevb_init(void)
#endif
ppchameleon_mtd->name = "ppchameleon-nand";
- mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- mtd_parts = partition_info_me;
- else
- mtd_parts = partition_info_hi;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
nand_evb_init:
/****************************
@@ -382,21 +363,13 @@ static int __init ppchameleonevb_init(void)
}
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
- mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info_evb;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 1fb3b3a80581..9eb7f879969e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -110,6 +110,7 @@ enum {
enum {
STATE_IDLE = 0,
+ STATE_PREPARED,
STATE_CMD_HANDLE,
STATE_DMA_READING,
STATE_DMA_WRITING,
@@ -120,21 +121,40 @@ enum {
STATE_READY,
};
-struct pxa3xx_nand_info {
- struct nand_chip nand_chip;
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct pxa3xx_nand_cmdset *cmdset;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ unsigned int page_size;
+ int use_ecc;
+ int cs;
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+ size_t read_id_bytes;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+};
+
+struct pxa3xx_nand_info {
struct nand_hw_control controller;
struct platform_device *pdev;
- struct pxa3xx_nand_cmdset *cmdset;
struct clk *clk;
void __iomem *mmio_base;
unsigned long mmio_phys;
+ struct completion cmd_complete;
unsigned int buf_start;
unsigned int buf_count;
- struct mtd_info *mtd;
/* DMA information */
int drcmr_dat;
int drcmr_cmd;
@@ -142,44 +162,27 @@ struct pxa3xx_nand_info {
unsigned char *data_buff;
unsigned char *oob_buff;
dma_addr_t data_buff_phys;
- size_t data_buff_size;
int data_dma_ch;
struct pxa_dma_desc *data_desc;
dma_addr_t data_desc_addr;
- uint32_t reg_ndcr;
-
- /* saved column/page_addr during CMD_SEQIN */
- int seqin_column;
- int seqin_page_addr;
-
- /* relate to the command */
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
unsigned int state;
+ int cs;
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
int is_ready;
unsigned int page_size; /* page size of attached chip */
unsigned int data_size; /* data size in FIFO */
+ unsigned int oob_size;
int retcode;
- struct completion cmd_complete;
/* generated NDCBx register values */
uint32_t ndcb0;
uint32_t ndcb1;
uint32_t ndcb2;
-
- /* timing calcuted from setting */
- uint32_t ndtr0cs0;
- uint32_t ndtr1cs0;
-
- /* calculated from pxa3xx_nand_flash data */
- size_t oob_size;
- size_t read_id_bytes;
-
- unsigned int col_addr_cycles;
- unsigned int row_addr_cycles;
};
static int use_dma = 1;
@@ -225,7 +228,7 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
-const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
@@ -241,9 +244,10 @@ const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
const struct pxa3xx_nand_timing *t)
{
+ struct pxa3xx_nand_info *info = host->info_data;
unsigned long nand_clk = clk_get_rate(info->clk);
uint32_t ndtr0, ndtr1;
@@ -258,23 +262,24 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
+ host->ndtr0cs0 = ndtr0;
+ host->ndtr1cs0 = ndtr1;
nand_writel(info, NDTR0CS0, ndtr0);
nand_writel(info, NDTR1CS0, ndtr1);
}
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ int oob_enable = host->reg_ndcr & NDCR_SPARE_EN;
- info->data_size = info->page_size;
+ info->data_size = host->page_size;
if (!oob_enable) {
info->oob_size = 0;
return;
}
- switch (info->page_size) {
+ switch (host->page_size) {
case 2048:
info->oob_size = (info->use_ecc) ? 40 : 64;
break;
@@ -292,9 +297,10 @@ static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
*/
static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr;
- ndcr = info->reg_ndcr;
+ ndcr = host->reg_ndcr;
ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
ndcr |= NDCR_ND_RUN;
@@ -359,7 +365,7 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
DIV_ROUND_UP(info->oob_size, 4));
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
@@ -385,7 +391,7 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
@@ -416,6 +422,15 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
{
struct pxa3xx_nand_info *info = devid;
unsigned int status, is_completed = 0;
+ unsigned int ready, cmd_done;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
status = nand_readl(info, NDSR);
@@ -437,11 +452,11 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
handle_data_pio(info);
}
}
- if (status & NDSR_CS0_CMDD) {
+ if (status & cmd_done) {
info->state = STATE_CMD_DONE;
is_completed = 1;
}
- if (status & NDSR_FLASH_RDY) {
+ if (status & ready) {
info->is_ready = 1;
info->state = STATE_READY;
}
@@ -463,12 +478,6 @@ NORMAL_IRQ_EXIT:
return IRQ_HANDLED;
}
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
- struct pxa3xx_nand_info *info = mtd->priv;
- return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
-}
-
static inline int is_buf_blank(uint8_t *buf, size_t len)
{
for (; len > 0; len--)
@@ -481,10 +490,12 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
uint16_t column, int page_addr)
{
uint16_t cmd;
- int addr_cycle, exec_cmd, ndcb0;
- struct mtd_info *mtd = info->mtd;
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
- ndcb0 = 0;
+ host = info->host[info->cs];
+ mtd = host->mtd;
addr_cycle = 0;
exec_cmd = 1;
@@ -495,6 +506,10 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
info->use_ecc = 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
switch (command) {
case NAND_CMD_READ0:
@@ -512,20 +527,19 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
}
- info->ndcb0 = ndcb0;
- addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
- + info->col_addr_cycles);
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
switch (command) {
case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- cmd = info->cmdset->read1;
+ cmd = host->cmdset->read1;
if (command == NAND_CMD_READOOB)
info->buf_start = mtd->writesize + column;
else
info->buf_start = column;
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
info->ndcb0 |= NDCB0_CMD_TYPE(0)
| addr_cycle
| (cmd & NDCB0_CMD1_MASK);
@@ -537,7 +551,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
case NAND_CMD_SEQIN:
/* small page addr setting */
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
| (column & 0xFF);
@@ -564,7 +578,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
}
- cmd = info->cmdset->program;
+ cmd = host->cmdset->program;
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_AUTO_RS
| NDCB0_ST_ROW_EN
@@ -574,8 +588,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_READID:
- cmd = info->cmdset->read_id;
- info->buf_count = info->read_id_bytes;
+ cmd = host->cmdset->read_id;
+ info->buf_count = host->read_id_bytes;
info->ndcb0 |= NDCB0_CMD_TYPE(3)
| NDCB0_ADDR_CYC(1)
| cmd;
@@ -583,7 +597,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
info->data_size = 8;
break;
case NAND_CMD_STATUS:
- cmd = info->cmdset->read_status;
+ cmd = host->cmdset->read_status;
info->buf_count = 1;
info->ndcb0 |= NDCB0_CMD_TYPE(4)
| NDCB0_ADDR_CYC(1)
@@ -593,7 +607,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_ERASE1:
- cmd = info->cmdset->erase;
+ cmd = host->cmdset->erase;
info->ndcb0 |= NDCB0_CMD_TYPE(2)
| NDCB0_AUTO_RS
| NDCB0_ADDR_CYC(3)
@@ -604,7 +618,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_RESET:
- cmd = info->cmdset->reset;
+ cmd = host->cmdset->reset;
info->ndcb0 |= NDCB0_CMD_TYPE(5)
| cmd;
@@ -616,8 +630,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
default:
exec_cmd = 0;
- printk(KERN_ERR "pxa3xx-nand: non-supported"
- " command %x\n", command);
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
break;
}
@@ -627,7 +641,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int ret, exec_cmd;
/*
@@ -635,9 +650,21 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
* "byte" address into a "word" address appropriate
* for indexing a word-oriented device
*/
- if (info->reg_ndcr & NDCR_DWIDTH_M)
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
column /= 2;
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, host->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, host->ndtr1cs0);
+ }
+
+ info->state = STATE_PREPARED;
exec_cmd = prepare_command_pool(info, command, column, page_addr);
if (exec_cmd) {
init_completion(&info->cmd_complete);
@@ -646,12 +673,12 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
ret = wait_for_completion_timeout(&info->cmd_complete,
CHIP_DELAY_TIMEOUT);
if (!ret) {
- printk(KERN_ERR "Wait time out!!!\n");
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
/* Stop State Machine for next command cycle */
pxa3xx_nand_stop(info);
}
- info->state = STATE_IDLE;
}
+ info->state = STATE_IDLE;
}
static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
@@ -664,7 +691,8 @@ static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -685,6 +713,8 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
* OOB, ignore such double bit errors
*/
if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
mtd->ecc_stats.failed++;
}
@@ -693,7 +723,8 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
char retval = 0xFF;
if (info->buf_start < info->buf_count)
@@ -705,7 +736,8 @@ static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
u16 retval = 0xFFFF;
if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
@@ -717,7 +749,8 @@ static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(buf, info->data_buff + info->buf_start, real_len);
@@ -727,7 +760,8 @@ static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(info->data_buff + info->buf_start, buf, real_len);
@@ -747,7 +781,8 @@ static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
/* pxa3xx_nand_send_command has waited for command complete */
if (this->state == FL_WRITING || this->state == FL_ERASING) {
@@ -770,54 +805,70 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
{
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr = 0x0; /* enable all interrupts */
- if (f->page_size != 2048 && f->page_size != 512)
+ if (f->page_size != 2048 && f->page_size != 512) {
+ dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
return -EINVAL;
+ }
- if (f->flash_width != 16 && f->flash_width != 8)
+ if (f->flash_width != 16 && f->flash_width != 8) {
+ dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
return -EINVAL;
+ }
/* calculate flash information */
- info->cmdset = &default_cmdset;
- info->page_size = f->page_size;
- info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+ host->cmdset = &default_cmdset;
+ host->page_size = f->page_size;
+ host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
- info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+ host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
if (f->num_blocks * f->page_per_block > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
+ host->row_addr_cycles = 2;
ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
- ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+ ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
ndcr |= NDCR_SPARE_EN; /* enable spare by default */
- info->reg_ndcr = ndcr;
+ host->reg_ndcr = ndcr;
- pxa3xx_nand_set_timing(info, f->timing);
+ pxa3xx_nand_set_timing(host, f->timing);
return 0;
}
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
{
+ /*
+ * We set 0 by hard coding here, for we don't support keep_config
+ * when there is more than one chip attached to the controller
+ */
+ struct pxa3xx_nand_host *host = info->host[0];
uint32_t ndcr = nand_readl(info, NDCR);
- info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- /* set info fields needed to read id */
- info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
- info->reg_ndcr = ndcr;
- info->cmdset = &default_cmdset;
- info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
- info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ if (ndcr & NDCR_PAGE_SZ) {
+ host->page_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+ host->page_size = 512;
+ host->read_id_bytes = 2;
+ }
+
+ host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ host->cmdset = &default_cmdset;
+
+ host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
return 0;
}
@@ -847,7 +898,6 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
return -ENOMEM;
}
- info->data_buff_size = MAX_BUFF_SIZE;
info->data_desc = (void *)info->data_buff + data_desc_offset;
info->data_desc_addr = info->data_buff_phys + data_desc_offset;
@@ -855,7 +905,7 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
pxa3xx_nand_data_dma_irq, info);
if (info->data_dma_ch < 0) {
dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
return info->data_dma_ch;
}
@@ -865,24 +915,28 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
- struct mtd_info *mtd = info->mtd;
- struct nand_chip *chip = mtd->priv;
-
+ struct mtd_info *mtd;
+ int ret;
+ mtd = info->host[info->cs]->mtd;
/* use the common timing to make a try */
- pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
- chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+ if (ret)
+ return ret;
+
+ pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
if (info->is_ready)
- return 1;
- else
return 0;
+
+ return -ENODEV;
}
static int pxa3xx_nand_scan(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
- struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+ struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
const struct pxa3xx_nand_flash *f = NULL;
struct nand_chip *chip = mtd->priv;
uint32_t id = -1;
@@ -893,22 +947,20 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
goto KEEP_CONFIG;
ret = pxa3xx_nand_sensing(info);
- if (!ret) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_INFO "There is no nand chip on cs 0!\n");
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
- return -EINVAL;
+ return ret;
}
chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
id = *((uint16_t *)(info->data_buff));
if (id != 0)
- printk(KERN_INFO "Detect a flash id %x\n", id);
+ dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
else {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+ dev_warn(&info->pdev->dev,
+ "Read out ID 0, potential timing set wrong!!\n");
return -EINVAL;
}
@@ -926,14 +978,17 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+ dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
return -EINVAL;
}
- pxa3xx_nand_config_flash(info, f);
+ ret = pxa3xx_nand_config_flash(info, f);
+ if (ret) {
+ dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+ return ret;
+ }
+
pxa3xx_flash_ids[0].name = f->name;
pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
pxa3xx_flash_ids[0].pagesize = f->page_size;
@@ -942,62 +997,78 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
if (f->flash_width == 16)
pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+ pxa3xx_flash_ids[1].name = NULL;
+ def = pxa3xx_flash_ids;
KEEP_CONFIG:
- if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = host->page_size;
+
+ chip->options = NAND_NO_AUTOINCR;
+ chip->options |= NAND_NO_READRDY;
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
/* calculate addressing information */
- info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
info->oob_buff = info->data_buff + mtd->writesize;
if ((mtd->size >> chip->page_shift) > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
- mtd->name = mtd_names[0];
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.size = f->page_size;
-
- chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
- chip->options |= NAND_NO_AUTOINCR;
- chip->options |= NAND_NO_READRDY;
+ host->row_addr_cycles = 2;
+ mtd->name = mtd_names[0];
return nand_scan_tail(mtd);
}
-static
-struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
+static int alloc_nand_resource(struct platform_device *pdev)
{
+ struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *r;
- int ret, irq;
+ int ret, irq, cs;
- mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
- GFP_KERNEL);
- if (!mtd) {
+ pdata = pdev->dev.platform_data;
+ info = kzalloc(sizeof(*info) + (sizeof(*mtd) +
+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+ if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return NULL;
+ return -ENOMEM;
}
- info = (struct pxa3xx_nand_info *)(&mtd[1]);
- chip = (struct nand_chip *)(&mtd[1]);
info->pdev = pdev;
- info->mtd = mtd;
- mtd->priv = info;
- mtd->owner = THIS_MODULE;
-
- chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- chip->controller = &info->controller;
- chip->waitfunc = pxa3xx_nand_waitfunc;
- chip->select_chip = pxa3xx_nand_select_chip;
- chip->dev_ready = pxa3xx_nand_dev_ready;
- chip->cmdfunc = pxa3xx_nand_cmdfunc;
- chip->read_word = pxa3xx_nand_read_word;
- chip->read_byte = pxa3xx_nand_read_byte;
- chip->read_buf = pxa3xx_nand_read_buf;
- chip->write_buf = pxa3xx_nand_write_buf;
- chip->verify_buf = pxa3xx_nand_verify_buf;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = (struct mtd_info *)((unsigned int)&info[1] +
+ (sizeof(*mtd) + sizeof(*host)) * cs);
+ chip = (struct nand_chip *)(&mtd[1]);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ mtd->priv = host;
+ mtd->owner = THIS_MODULE;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->verify_buf = pxa3xx_nand_verify_buf;
+ }
spin_lock_init(&chip->controller->lock);
init_waitqueue_head(&chip->controller->wq);
@@ -1070,13 +1141,13 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
- return info;
+ return 0;
fail_free_buf:
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
@@ -1088,17 +1159,21 @@ fail_put_clk:
clk_disable(info->clk);
clk_put(info->clk);
fail_free_mtd:
- kfree(mtd);
- return NULL;
+ kfree(info);
+ return ret;
}
static int pxa3xx_nand_remove(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
struct resource *r;
- int irq;
+ int irq, cs;
+ if (!info)
+ return 0;
+
+ pdata = pdev->dev.platform_data;
platform_set_drvdata(pdev, NULL);
irq = platform_get_irq(pdev, 0);
@@ -1106,7 +1181,7 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_writecombine(&pdev->dev, info->data_buff_size,
+ dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
@@ -1118,10 +1193,9 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
clk_disable(info->clk);
clk_put(info->clk);
- if (mtd) {
- mtd_device_unregister(mtd);
- kfree(mtd);
- }
+ for (cs = 0; cs < pdata->num_cs; cs++)
+ nand_release(info->host[cs]->mtd);
+ kfree(info);
return 0;
}
@@ -1129,6 +1203,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
{
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ int ret, cs, probe_success;
pdata = pdev->dev.platform_data;
if (!pdata) {
@@ -1136,52 +1211,88 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
return -ENODEV;
}
- info = alloc_nand_resource(pdev);
- if (info == NULL)
- return -ENOMEM;
-
- if (pxa3xx_nand_scan(info->mtd)) {
- dev_err(&pdev->dev, "failed to scan nand\n");
- pxa3xx_nand_remove(pdev);
- return -ENODEV;
+ ret = alloc_nand_resource(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
}
- if (mtd_has_cmdlinepart()) {
- const char *probes[] = { "cmdlinepart", NULL };
- struct mtd_partition *parts;
- int nr_parts;
+ info = platform_get_drvdata(pdev);
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(info->host[cs]->mtd);
+ if (ret) {
+ dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
- nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+ ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
+ pdata->parts[cs], pdata->nr_parts[cs]);
+ if (!ret)
+ probe_success = 1;
+ }
- if (nr_parts)
- return mtd_device_register(info->mtd, parts, nr_parts);
+ if (!probe_success) {
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
}
- return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
+ return 0;
}
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
+ pdata = pdev->dev.platform_data;
if (info->state) {
dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
return -EAGAIN;
}
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->suspend(mtd);
+ }
+
return 0;
}
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- clk_enable(info->clk);
+ pdata = pdev->dev.platform_data;
+ /* We don't want to handle interrupt without calling mtd routine */
+ disable_int(info, NDCR_INT_MASK);
+
+ /*
+ * Directly set the chip select to a invalid value,
+ * then the driver would reset the timing according
+ * to current chip select at the beginning of cmdfunc
+ */
+ info->cs = 0xff;
+
+ /*
+ * As the spec says, the NDSR would be updated to 0x1800 when
+ * doing the nand_clk disable/enable.
+ * To prevent it damaging state machine of the driver, clear
+ * all status before resume
+ */
+ nand_writel(info, NDSR, NDSR_MASK);
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->resume(mtd);
+ }
return 0;
}
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index cae2e013c986..f20f393bfda6 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -1027,7 +1027,7 @@ void r852_shutdown(struct pci_dev *pci_dev)
}
#ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+static int r852_suspend(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
@@ -1048,7 +1048,7 @@ int r852_suspend(struct device *device)
return 0;
}
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
@@ -1092,7 +1092,7 @@ static const struct pci_device_id r852_pci_id_tbl[] = {
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
static struct pci_driver r852_pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index c9f9127ff770..f309addc2fa0 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -351,7 +351,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
return 0;
}
- /* Read the syndrom pattern from the FPGA and correct the bitorder */
+ /* Read the syndrome pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
for (i = 0; i < 8; i++) {
ecc[i] = bitrev8(*rs_ecc);
@@ -380,7 +380,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
/* Let the library code do its magic. */
res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
if (res > 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
+ pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
}
return res;
}
@@ -444,7 +444,6 @@ static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1;
goto out;
}
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 4405468f196b..868685db6712 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -723,7 +723,7 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
/* free the common resources */
- if (info->clk != NULL && !IS_ERR(info->clk)) {
+ if (!IS_ERR(info->clk)) {
s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
@@ -744,26 +744,15 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
return 0;
}
-const char *part_probes[] = { "cmdlinepart", NULL };
static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
- struct mtd_partition *part_info;
- int nr_part = 0;
+ if (set)
+ mtd->mtd.name = set->name;
- if (set == NULL)
- return mtd_device_register(&mtd->mtd, NULL, 0);
-
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
-
- if (nr_part <= 0 && set->nr_partitions > 0) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
-
- return mtd_device_register(&mtd->mtd, part_info, nr_part);
+ return mtd_device_parse_register(&mtd->mtd, NULL, 0,
+ set->partitions, set->nr_partitions);
}
/**
@@ -880,8 +869,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
/* If you use u-boot BBT creation code, specifying this flag will
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt)
- chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
}
/**
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 19e24ed089ea..619d2a504788 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -103,16 +103,12 @@ static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat,
return readb(sharpsl->io + ECCCNTR) != 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this;
- struct mtd_partition *sharpsl_partition_info;
- int nr_partitions;
struct resource *r;
int err = 0;
struct sharpsl_nand *sharpsl;
@@ -184,14 +180,9 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
- nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
- if (nr_partitions <= 0) {
- nr_partitions = data->nr_partitions;
- sharpsl_partition_info = data->partitions;
- }
- err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info,
- nr_partitions);
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
+ data->partitions, data->nr_partitions);
if (err)
goto err_add;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 43469715b3fa..32ae5af7444f 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -48,7 +48,7 @@ static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* As long as this function is called on erase block boundaries
it will work correctly for 256 byte nand */
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.oobbuf = (void *)&oob;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index ca2d0555729e..0fb24f9c2327 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -155,8 +155,6 @@ static int socrates_nand_device_ready(struct mtd_info *mtd)
return 1;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Probe for the NAND device.
*/
@@ -166,8 +164,7 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
+ struct mtd_part_parser_data ppdata;
/* Allocate memory for the device structure (and zero it) */
host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
@@ -193,6 +190,7 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
mtd->name = "socrates_nand";
mtd->owner = THIS_MODULE;
mtd->dev.parent = &ofdev->dev;
+ ppdata.of_node = ofdev->dev.of_node;
/*should never be accessed directly */
nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
@@ -225,30 +223,10 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
goto out;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
-#endif
-
- if (num_partitions == 0) {
- num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->dev.of_node,
- &partitions);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (!res)
return res;
-release:
nand_release(mtd);
out:
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 11e8371b5683..beebd95f7690 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -121,9 +121,6 @@ struct tmio_nand {
#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd)
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/*--------------------------------------------------------------------------*/
@@ -381,8 +378,6 @@ static int tmio_probe(struct platform_device *dev)
struct tmio_nand *tmio;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct mtd_partition *parts;
- int nbparts = 0;
int retval;
if (data == NULL)
@@ -461,15 +456,9 @@ static int tmio_probe(struct platform_device *dev)
goto err_scan;
}
/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
- if (nbparts <= 0 && data) {
- parts = data->partition;
- nbparts = data->num_partitions;
- }
-
- retval = mtd_device_register(mtd, parts, nbparts);
+ retval = mtd_device_parse_register(mtd, NULL, 0,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
if (!retval)
return retval;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index bfba4e39a6c5..ace46fdaef58 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -74,7 +74,6 @@ struct txx9ndfmc_drvdata {
unsigned char hold; /* in gbusclock */
unsigned char spw; /* in gbusclock */
struct nand_hw_control hw_control;
- struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
};
static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
@@ -287,7 +286,6 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
- static const char *probes[] = { "cmdlinepart", NULL };
int hold, spw;
int i;
struct txx9ndfmc_drvdata *drvdata;
@@ -333,7 +331,6 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
struct txx9ndfmc_priv *txx9_priv;
struct nand_chip *chip;
struct mtd_info *mtd;
- int nr_parts;
if (!(plat->ch_mask & (1 << i)))
continue;
@@ -393,9 +390,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
}
mtd->name = txx9_priv->mtdname;
- nr_parts = parse_mtd_partitions(mtd, probes,
- &drvdata->parts[i], 0);
- mtd_device_register(mtd, drvdata->parts[i], nr_parts);
+ mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
drvdata->mtds[i] = mtd;
}
@@ -421,7 +416,6 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
txx9_priv = chip->priv;
nand_release(mtd);
- kfree(drvdata->parts[i]);
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
}
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index b155666acfbe..cda77b562ad4 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -63,14 +63,12 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
return;
}
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("NFTL: add_mtd for %s\n", mtd->name);
nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
- if (!nftl) {
- printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+ if (!nftl)
return;
- }
nftl->mbd.mtd = mtd;
nftl->mbd.devnum = -1;
@@ -132,7 +130,7 @@ static void nftl_remove_dev(struct mtd_blktrans_dev *dev)
{
struct NFTLrecord *nftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("NFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(nftl->ReplUnitTable);
@@ -149,7 +147,7 @@ int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
@@ -170,7 +168,7 @@ int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
@@ -193,7 +191,7 @@ static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
@@ -220,7 +218,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate )
/* Normally, we force a fold to happen before we run out of free blocks completely */
if (!desperate && nftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+ pr_debug("NFTL_findfreeblock: there are too few free EUNs\n");
return BLOCK_NIL;
}
@@ -291,8 +289,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
if (block == 2) {
foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
if (foldmark == FOLD_MARK_IN_PROGRESS) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "Write Inhibited on EUN %d\n", thisEUN);
+ pr_debug("Write Inhibited on EUN %d\n", thisEUN);
inplace = 0;
} else {
/* There's no other reason not to do inplace,
@@ -357,7 +354,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
if (BlockLastState[block] != SECTOR_FREE &&
BlockMap[block] != BLOCK_NIL &&
BlockMap[block] != targetEUN) {
- DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+ pr_debug("Setting inplace to 0. VUC %d, "
"block %d was %x lastEUN, "
"and is in EUN %d (%s) %d\n",
thisVUC, block, BlockLastState[block],
@@ -373,14 +370,14 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
SECTOR_FREE) {
- DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+ pr_debug("Pending write not free in EUN %d. "
"Folding out of place.\n", targetEUN);
inplace = 0;
}
}
if (!inplace) {
- DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+ pr_debug("Cannot fold Virtual Unit Chain %d in place. "
"Trying out-of-place\n", thisVUC);
/* We need to find a targetEUN to fold into. */
targetEUN = NFTL_findfreeblock(nftl, 1);
@@ -410,7 +407,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
and the Erase Unit into which we are supposed to be copying.
Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+ pr_debug("Folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < nftl->EraseSize / 512 ; block++) {
unsigned char movebuf[512];
int ret;
@@ -428,7 +425,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
512, &retlen, movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
+ (block * 512), 512, &retlen,
movebuf);
@@ -457,7 +454,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p
has duplicate chains, we need to free one of the chains because it's not necessary any more.
*/
thisEUN = nftl->EUNtable[thisVUC];
- DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+ pr_debug("Want to erase\n");
/* For each block in the old chain (except the targetEUN of course),
free it and make it available for future use */
@@ -570,7 +567,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
(writeEUN * nftl->EraseSize) + blockofs,
8, &retlen, (char *)&bci);
- DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+ pr_debug("Status of block %d in EUN %d is %x\n",
block , writeEUN, le16_to_cpu(bci.Status));
status = bci.Status | bci.Status1;
@@ -623,7 +620,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block)
but they are reserved for when we're
desperate. Well, now we're desperate.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+ pr_debug("Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
writeEUN = NFTL_findfreeblock(nftl, 1);
}
if (writeEUN == BLOCK_NIL) {
@@ -776,7 +773,7 @@ static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block,
size_t retlen;
int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
- if (res < 0 && res != -EUCLEAN)
+ if (res < 0 && !mtd_is_bitflip(res))
return -EIO;
}
return 0;
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index e3cd1ffad2f6..ac4092591aea 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -32,7 +32,7 @@
/* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
* various device information of the NFTL partition and Bad Unit Table. Update
- * the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ * the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[]
* is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
*/
static int find_boot_record(struct NFTLrecord *nftl)
@@ -297,7 +297,7 @@ static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int NFTL_formatblock(struct NFTLrecord *nftl, int block)
{
@@ -337,7 +337,7 @@ int NFTL_formatblock(struct NFTLrecord *nftl, int block)
nb_erases = le32_to_cpu(uci.WearInfo);
nb_erases++;
- /* wrap (almost impossible with current flashs) or free block */
+ /* wrap (almost impossible with current flash) or free block */
if (nb_erases == 0)
nb_erases = 1;
@@ -363,10 +363,10 @@ fail:
* Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
* was being folded when NFTL was interrupted.
*
- * The check_free_sectors in this function is neceressary. There is a possible
+ * The check_free_sectors in this function is necessary. There is a possible
* situation that after writing the Data area, the Block Control Information is
* not updated according (due to power failure or something) which leaves the block
- * in an umconsistent state. So we have to check if a block is really FREE in this
+ * in an inconsistent state. So we have to check if a block is really FREE in this
* case. */
static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
{
@@ -428,7 +428,7 @@ static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
for (;;) {
length++;
- /* avoid infinite loops, although this is guaranted not to
+ /* avoid infinite loops, although this is guaranteed not to
happen because of the previous checks */
if (length >= nftl->nb_blocks) {
printk("nftl: length too long %d !\n", length);
@@ -447,11 +447,11 @@ static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block)
/* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
* Virtual Unit Chain, i.e. all the units are disconnected.
*
- * It is not stricly correct to begin from the first block of the chain because
+ * It is not strictly correct to begin from the first block of the chain because
* if we stop the code, we may see again a valid chain if there was a first_block
* flag in a block inside it. But is it really a problem ?
*
- * FixMe: Figure out what the last statesment means. What if power failure when we are
+ * FixMe: Figure out what the last statement means. What if power failure when we are
* in the for (;;) loop formatting blocks ??
*/
static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
@@ -485,7 +485,7 @@ static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
* totally free (only 0xff).
*
* Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
- * following critia:
+ * following criteria:
* 1. */
static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
{
@@ -502,7 +502,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
if (erase_mark != ERASE_MARK) {
/* if no erase mark, the block must be totally free. This is
- possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+ possible in two cases : empty filesystem or interrupted erase (very unlikely) */
if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
return -1;
@@ -544,7 +544,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
/* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
* to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
* is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
- * for some reason. A clean up/check of the VUC is neceressary in this case.
+ * for some reason. A clean up/check of the VUC is necessary in this case.
*
* WARNING: return 0 if read error
*/
@@ -657,7 +657,7 @@ int NFTL_mount(struct NFTLrecord *s)
printk("Block %d: incorrect logical block: %d expected: %d\n",
block, logical_block, first_logical_block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
}
if (is_first_block) {
@@ -669,7 +669,7 @@ int NFTL_mount(struct NFTLrecord *s)
printk("Block %d: incorrectly marked as first block in chain\n",
block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
} else {
printk("Block %d: folding in progress - ignoring first block flag\n",
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index a996718fa6b0..64be8f0848b0 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -20,14 +20,23 @@
#include <linux/slab.h>
#include <linux/mtd/partitions.h>
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
+static int parse_ofpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
+ struct device_node *node;
const char *partname;
struct device_node *pp;
int nr_parts, i;
+
+ if (!data)
+ return 0;
+
+ node = data->of_node;
+ if (!node)
+ return 0;
+
/* First count the subnodes */
pp = NULL;
nr_parts = 0;
@@ -69,7 +78,7 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
if (!i) {
of_node_put(pp);
- dev_err(dev, "No valid partition found on %s\n", node->full_name);
+ pr_err("No valid partition found on %s\n", node->full_name);
kfree(*pparts);
*pparts = NULL;
return -EINVAL;
@@ -77,6 +86,99 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
return nr_parts;
}
-EXPORT_SYMBOL(of_mtd_parse_partitions);
+
+static struct mtd_part_parser ofpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofpart_partitions,
+ .name = "ofpart",
+};
+
+static int parse_ofoldpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct device_node *dp;
+ int i, plen, nr_parts;
+ const struct {
+ __be32 offset, len;
+ } *part;
+ const char *names;
+
+ if (!data)
+ return 0;
+
+ dp = data->of_node;
+ if (!dp)
+ return 0;
+
+ part = of_get_property(dp, "partitions", &plen);
+ if (!part)
+ return 0; /* No partitions found */
+
+ pr_warning("Device tree uses obsolete partition map binding: %s\n",
+ dp->full_name);
+
+ nr_parts = plen / sizeof(part[0]);
+
+ *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+ if (!pparts)
+ return -ENOMEM;
+
+ names = of_get_property(dp, "partition-names", &plen);
+
+ for (i = 0; i < nr_parts; i++) {
+ (*pparts)[i].offset = be32_to_cpu(part->offset);
+ (*pparts)[i].size = be32_to_cpu(part->len) & ~1;
+ /* bit 0 set signifies read only partition */
+ if (be32_to_cpu(part->len) & 1)
+ (*pparts)[i].mask_flags = MTD_WRITEABLE;
+
+ if (names && (plen > 0)) {
+ int len = strlen(names) + 1;
+
+ (*pparts)[i].name = (char *)names;
+ plen -= len;
+ names += len;
+ } else {
+ (*pparts)[i].name = "unnamed";
+ }
+
+ part++;
+ }
+
+ return nr_parts;
+}
+
+static struct mtd_part_parser ofoldpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofoldpart_partitions,
+ .name = "ofoldpart",
+};
+
+static int __init ofpart_parser_init(void)
+{
+ int rc;
+ rc = register_mtd_parser(&ofpart_parser);
+ if (rc)
+ goto out;
+
+ rc = register_mtd_parser(&ofoldpart_parser);
+ if (!rc)
+ return 0;
+
+ deregister_mtd_parser(&ofoldpart_parser);
+out:
+ return rc;
+}
+
+module_init(ofpart_parser_init);
MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
+MODULE_AUTHOR("Vitaly Wool, David Gibson");
+/*
+ * When MTD core cannot find the requested parser, it tries to load the module
+ * with the same name. Since we provide the ofoldpart parser, we should have
+ * the corresponding alias.
+ */
+MODULE_ALIAS("ofoldpart");
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 2d70d354d846..7813095264a5 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -30,11 +30,8 @@
*/
#define DRIVER_NAME "onenand-flash"
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
struct onenand_info {
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
};
@@ -73,13 +70,9 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
goto out_iounmap;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(&info->mtd, NULL, 0);
+ err = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, info);
@@ -104,7 +97,6 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (info) {
- mtd_device_unregister(&info->mtd);
onenand_release(&info->mtd);
release_mem_region(res->start, size);
iounmap(info->onenand.base);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 6a1d6d9a2df9..7e9ea6852b67 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -57,7 +57,6 @@ struct omap2_onenand {
unsigned long phys_base;
int gpio_irq;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
@@ -67,8 +66,6 @@ struct omap2_onenand {
struct regulator *regulator;
};
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
{
struct omap2_onenand *c = data;
@@ -741,6 +738,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
c->regulator = regulator_get(&pdev->dev, "vonenand");
if (IS_ERR(c->regulator)) {
dev_err(&pdev->dev, "Failed to get regulator\n");
+ r = PTR_ERR(c->regulator);
goto err_release_dma;
}
c->onenand.enable = omap2_onenand_enable;
@@ -753,13 +751,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_regulator;
- r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
- if (r > 0)
- r = mtd_device_register(&c->mtd, c->parts, r);
- else if (pdata->parts != NULL)
- r = mtd_device_register(&c->mtd, pdata->parts, pdata->nr_parts);
- else
- r = mtd_device_register(&c->mtd, NULL, 0);
+ r = mtd_device_parse_register(&c->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
if (r)
goto err_release_onenand;
@@ -786,7 +780,6 @@ err_release_mem_region:
err_free_cs:
gpmc_cs_free(c->gpmc_cs);
err_kfree:
- kfree(c->parts);
kfree(c);
return r;
@@ -809,7 +802,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
gpmc_cs_free(c->gpmc_cs);
- kfree(c->parts);
kfree(c);
return 0;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index ac9e959802a7..a8394730b4b6 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1015,7 +1015,7 @@ static void onenand_release_device(struct mtd_info *mtd)
}
/**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param buf destination address
* @param column oob offset to read from
@@ -1079,7 +1079,7 @@ static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
return status;
/* check if we failed due to uncorrectable error */
- if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
return status;
/* check if address lies in MLC region */
@@ -1122,10 +1122,10 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
int ret = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1159,7 +1159,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
if (ret)
break;
@@ -1170,7 +1170,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1226,10 +1226,10 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
int ret = 0, boundary = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1255,7 +1255,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
}
@@ -1291,7 +1291,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1315,7 +1315,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
/* Now wait for load */
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
@@ -1351,19 +1351,19 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
struct mtd_ecc_stats stats;
int read = 0, thislen, column, oobsize;
size_t len = ops->ooblen;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
u_char *buf = ops->oobbuf;
int ret = 0, readcmd;
from += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
/* Initialize return length value */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1403,13 +1403,13 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
- if (ret && ret != -EBADMSG) {
+ if (ret && !mtd_is_eccerr(ret)) {
printk(KERN_ERR "%s: read failed = 0x%x\n",
__func__, ret);
break;
}
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
@@ -1487,10 +1487,10 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
@@ -1576,8 +1576,8 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
- __func__, (unsigned int) from, len);
+ pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
+ len);
/* Initialize return value */
ops->oobretlen = 0;
@@ -1750,8 +1750,8 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Wait for any existing operation to clear */
onenand_panic_wait(mtd);
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
@@ -1821,7 +1821,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
}
/**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param oob_buf oob buffer
* @param buf source address
@@ -1883,8 +1883,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
u_char *oobbuf;
int ret = 0, cmd;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->retlen = 0;
@@ -1908,7 +1908,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
if (!len)
return 0;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -1945,7 +1945,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
else
memcpy(oobbuf + oobcolumn, oob, thisooblen);
@@ -2055,7 +2055,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
/**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
@@ -2074,17 +2074,17 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
to += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
@@ -2128,7 +2128,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
@@ -2217,10 +2217,10 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
@@ -2281,7 +2281,7 @@ static int onenand_multiblock_erase_verify(struct mtd_info *mtd,
}
/**
- * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
+ * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
@@ -2397,7 +2397,7 @@ static int onenand_multiblock_erase(struct mtd_info *mtd,
/**
- * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
@@ -2489,8 +2489,9 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
struct mtd_erase_region_info *region = NULL;
loff_t region_offset = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
- (unsigned long long) instr->addr, (unsigned long long) instr->len);
+ pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
+ (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
/* Do not allow erase past end of device */
if (unlikely((len + addr) > mtd->size)) {
@@ -2558,7 +2559,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
*/
static void onenand_sync(struct mtd_info *mtd)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
@@ -2602,7 +2603,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooblen = 2,
.oobbuf = buf,
.ooboffs = 0,
@@ -2922,7 +2923,7 @@ static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
}
/**
- * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
@@ -3170,7 +3171,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
} else {
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = len;
ops.oobbuf = buf;
ops.ooboffs = 0;
@@ -3429,6 +3430,19 @@ static void onenand_check_features(struct mtd_info *mtd)
else if (numbufs == 1) {
this->options |= ONENAND_HAS_4KB_PAGE;
this->options |= ONENAND_HAS_CACHE_PROGRAM;
+ /*
+ * There are two different 4KiB pagesize chips
+ * and no way to detect it by H/W config values.
+ *
+ * To detect the correct NOP for each chips,
+ * It should check the version ID as workaround.
+ *
+ * Now it has as following
+ * KFM4G16Q4M has NOP 4 with version ID 0x0131
+ * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+ */
+ if ((this->version_id & 0xf) == 0xe)
+ this->options |= ONENAND_HAS_NOP_1;
}
case ONENAND_DEVICE_DENSITY_2Gb:
@@ -3663,7 +3677,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int
int i, ret;
int block;
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooboffs = 0,
.ooblen = mtd->oobsize,
.datbuf = NULL,
@@ -4054,6 +4068,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
this->ecclayout = &onenand_oob_128;
mtd->subpage_sft = 2;
}
+ if (ONENAND_IS_NOP_1(this))
+ mtd->subpage_sft = 0;
break;
case 64:
this->ecclayout = &onenand_oob_64;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index b2d7fc5ea25d..66fe3b7e7851 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -81,7 +81,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
startblock = 0;
from = 0;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = readlen;
ops.oobbuf = buf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -154,7 +154,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
block = (int) (onenand_block(this, offs) << 1);
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
(unsigned int) offs, block >> 1, res);
switch ((int) res) {
@@ -189,10 +189,8 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) and clear the memory bad block table */
bbm->bbt = kzalloc(len, GFP_KERNEL);
- if (!bbm->bbt) {
- printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+ if (!bbm->bbt)
return -ENOMEM;
- }
/* Set the bad block position */
bbm->badblockpos = ONENAND_BADBLOCK_POS;
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 3306b5b3c736..5474547eafc2 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -147,7 +147,6 @@ struct s3c_onenand {
struct resource *dma_res;
unsigned long phys_base;
struct completion complete;
- struct mtd_partition *parts;
};
#define CMD_MAP_00(dev, addr) (dev->cmd_map(MAP_00, ((addr) << 1)))
@@ -157,8 +156,6 @@ struct s3c_onenand {
static struct s3c_onenand *onenand;
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static inline int s3c_read_reg(int offset)
{
return readl(onenand->base + offset);
@@ -1017,13 +1014,9 @@ static int s3c_onenand_probe(struct platform_device *pdev)
if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ)
dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n");
- err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0);
- if (err > 0)
- mtd_device_register(mtd, onenand->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(mtd, NULL, 0);
+ err = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, mtd);
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 84b4dda023f4..e366b1d84ead 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -57,8 +57,8 @@ static inline int redboot_checksum(struct fis_image_desc *img)
}
static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
int nrparts = 0;
struct fis_image_desc *buf;
@@ -198,11 +198,10 @@ static int parse_redboot_partitions(struct mtd_info *master,
goto out;
}
new_fl->img = &buf[i];
- if (fis_origin) {
- buf[i].flash_base -= fis_origin;
- } else {
- buf[i].flash_base &= master->size-1;
- }
+ if (data && data->origin)
+ buf[i].flash_base -= data->origin;
+ else
+ buf[i].flash_base &= master->size-1;
/* I'm sure the JFFS2 code has done me permanent damage.
* I now think the following is _normal_
@@ -298,6 +297,9 @@ static struct mtd_part_parser redboot_parser = {
.name = "RedBoot",
};
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("RedBoot");
+
static int __init redboot_parser_init(void)
{
return register_mtd_parser(&redboot_parser);
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index ed3d6cd2c6dc..fddb714e323c 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -34,7 +34,7 @@ module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
-/* ------------------- sysfs attributtes ---------------------------------- */
+/* ------------------- sysfs attributes ---------------------------------- */
struct sm_sysfs_attribute {
struct device_attribute dev_attr;
char *data;
@@ -138,7 +138,7 @@ static int sm_get_lba(uint8_t *lba)
if ((lba[0] & 0xF8) != 0x10)
return -2;
- /* check parity - endianess doesn't matter */
+ /* check parity - endianness doesn't matter */
if (hweight16(*(uint16_t *)lba) & 1)
return -2;
@@ -147,7 +147,7 @@ static int sm_get_lba(uint8_t *lba)
/*
- * Read LBA asscociated with block
+ * Read LBA associated with block
* returns -1, if block is erased
* returns -2 if error happens
*/
@@ -252,11 +252,11 @@ static int sm_read_sector(struct sm_ftl *ftl,
return 0;
}
- /* User might not need the oob, but we do for data vertification */
+ /* User might not need the oob, but we do for data verification */
if (!oob)
oob = &tmp_oob;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = SM_OOB_SIZE;
ops.oobbuf = (void *)oob;
@@ -276,12 +276,12 @@ again:
return ret;
}
- /* Unfortunelly, oob read will _always_ succeed,
+ /* Unfortunately, oob read will _always_ succeed,
despite card removal..... */
ret = mtd->read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
/* Test for unknown errors */
- if (ret != 0 && ret != -EUCLEAN && ret != -EBADMSG) {
+ if (ret != 0 && !mtd_is_bitflip_or_eccerr(ret)) {
dbg("read of block %d at zone %d, failed due to error (%d)",
block, zone, ret);
goto again;
@@ -306,7 +306,7 @@ again:
}
/* Test ECC*/
- if (ret == -EBADMSG ||
+ if (mtd_is_eccerr(ret) ||
(ftl->smallpagenand && sm_correct_sector(buffer, oob))) {
dbg("read of block %d at zone %d, failed due to ECC error",
@@ -336,7 +336,7 @@ static int sm_write_sector(struct sm_ftl *ftl,
if (ftl->unstable)
return -EIO;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.len = SM_SECTOR_SIZE;
ops.datbuf = buffer;
ops.ooboffs = 0;
@@ -447,14 +447,14 @@ static void sm_mark_block_bad(struct sm_ftl *ftl, int zone, int block)
/* We aren't checking the return value, because we don't care */
/* This also fails on fake xD cards, but I guess these won't expose
- any bad blocks till fail completly */
+ any bad blocks till fail completely */
for (boffset = 0; boffset < ftl->block_size; boffset += SM_SECTOR_SIZE)
sm_write_sector(ftl, zone, block, boffset, NULL, &oob);
}
/*
* Erase a block within a zone
- * If erase succedes, it updates free block fifo, otherwise marks block as bad
+ * If erase succeeds, it updates free block fifo, otherwise marks block as bad
*/
static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
int put_free)
@@ -510,7 +510,7 @@ static void sm_erase_callback(struct erase_info *self)
complete(&ftl->erase_completion);
}
-/* Throughtly test that block is valid. */
+/* Thoroughly test that block is valid. */
static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
{
int boffset;
@@ -526,7 +526,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
for (boffset = 0; boffset < ftl->block_size;
boffset += SM_SECTOR_SIZE) {
- /* This shoudn't happen anyway */
+ /* This shouldn't happen anyway */
if (sm_read_sector(ftl, zone, block, boffset, NULL, &oob))
return -2;
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index 5cd189793332..976e3d28b962 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -135,8 +135,7 @@ static int get_valid_cis_sector(struct mtd_info *mtd)
/* Found */
cis_sector = (int)(offset >> SECTOR_SHIFT);
} else {
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: CIS/IDI sector not found"
+ pr_debug("SSFDC_RO: CIS/IDI sector not found"
" on %s (mtd%d)\n", mtd->name,
mtd->index);
}
@@ -170,7 +169,7 @@ static int read_raw_oob(struct mtd_info *mtd, loff_t offs, uint8_t *buf)
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = OOB_SIZE;
ops.oobbuf = buf;
@@ -221,8 +220,7 @@ static int get_logical_address(uint8_t *oob_buf)
block_address >>= 1;
if (get_parity(block_address, 10) != parity) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: logical address field%d"
+ pr_debug("SSFDC_RO: logical address field%d"
"parity error(0x%04X)\n", j+1,
block_address);
} else {
@@ -235,7 +233,7 @@ static int get_logical_address(uint8_t *oob_buf)
if (!ok)
block_address = -2;
- DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+ pr_debug("SSFDC_RO: get_logical_address() %d\n",
block_address);
return block_address;
@@ -249,7 +247,7 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
int ret, block_address, phys_block;
struct mtd_info *mtd = ssfdc->mbd.mtd;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+ pr_debug("SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
ssfdc->map_len,
(unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
@@ -262,8 +260,7 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
ret = read_raw_oob(mtd, offset, oob_buf);
if (ret < 0) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: mtd read_oob() failed at %lu\n",
+ pr_debug("SSFDC_RO: mtd read_oob() failed at %lu\n",
offset);
return -1;
}
@@ -279,8 +276,7 @@ static int build_logical_block_map(struct ssfdcr_record *ssfdc)
ssfdc->logic_block_map[block_address] =
(unsigned short)phys_block;
- DEBUG(MTD_DEBUG_LEVEL2,
- "SSFDC_RO: build_block_map() phys_block=%d,"
+ pr_debug("SSFDC_RO: build_block_map() phys_block=%d,"
"logic_block_addr=%d, zone=%d\n",
phys_block, block_address, zone_index);
}
@@ -304,11 +300,8 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
return;
ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
- if (!ssfdc) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc)
return;
- }
ssfdc->mbd.mtd = mtd;
ssfdc->mbd.devnum = -1;
@@ -319,8 +312,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
ssfdc->erase_size = mtd->erasesize;
ssfdc->map_len = (u32)mtd->size / mtd->erasesize;
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+ pr_debug("SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
@@ -331,7 +323,7 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
ssfdc->cylinders = (unsigned short)(((u32)mtd->size >> SECTOR_SHIFT) /
((long)ssfdc->sectors * (long)ssfdc->heads));
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+ pr_debug("SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
(long)ssfdc->cylinders * (long)ssfdc->heads *
(long)ssfdc->sectors);
@@ -342,11 +334,8 @@ static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
/* Allocate logical block map */
ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len, GFP_KERNEL);
- if (!ssfdc->logic_block_map) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc->logic_block_map)
goto out_err;
- }
memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len);
@@ -371,7 +360,7 @@ static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(ssfdc->logic_block_map);
@@ -387,8 +376,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
offset = (int)(logic_sect_no % sectors_per_block);
block_address = (int)(logic_sect_no / sectors_per_block);
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+ pr_debug("SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
block_address);
@@ -397,8 +385,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
block_address = ssfdc->logic_block_map[block_address];
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
block_address);
if (block_address < 0xffff) {
@@ -407,8 +394,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
sect_no = (unsigned long)block_address * sectors_per_block +
offset;
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
sect_no);
if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
@@ -424,7 +410,7 @@ static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
geo->heads = ssfdc->heads;
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index dec92ae6111a..933f7e5f32d3 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -30,7 +30,7 @@
#define PRINT_PREF KERN_INFO "mtd_oobtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -131,7 +131,7 @@ static int write_eraseblock(int ebnum)
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
@@ -184,7 +184,7 @@ static int verify_eraseblock(int ebnum)
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
@@ -211,7 +211,7 @@ static int verify_eraseblock(int ebnum)
if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
int k;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
@@ -276,7 +276,7 @@ static int verify_eraseblock_in_one_go(int ebnum)
size_t len = mtd->ecclayout->oobavail * pgcnt;
set_random_data(writebuf, len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = len;
@@ -366,6 +366,13 @@ static int __init mtd_oobtest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
@@ -507,7 +514,7 @@ static int __init mtd_oobtest_init(void)
addr0 += mtd->erasesize;
/* Attempt to write off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
@@ -527,7 +534,7 @@ static int __init mtd_oobtest_init(void)
}
/* Attempt to read off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
@@ -551,7 +558,7 @@ static int __init mtd_oobtest_init(void)
"block is bad\n");
else {
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
@@ -571,7 +578,7 @@ static int __init mtd_oobtest_init(void)
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
@@ -595,7 +602,7 @@ static int __init mtd_oobtest_init(void)
goto out;
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
@@ -615,7 +622,7 @@ static int __init mtd_oobtest_init(void)
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
@@ -655,7 +662,7 @@ static int __init mtd_oobtest_init(void)
addr = (i + 1) * mtd->erasesize - mtd->writesize;
for (pg = 0; pg < cnt; ++pg) {
set_random_data(writebuf, sz);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = sz;
@@ -683,7 +690,7 @@ static int __init mtd_oobtest_init(void)
continue;
set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
addr = (i + 1) * mtd->erasesize - mtd->writesize;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail * 2;
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 00b937e38c1d..afafb6935fd0 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -30,7 +30,7 @@
#define PRINT_PREF KERN_INFO "mtd_pagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -128,7 +128,7 @@ static int verify_eraseblock(int ebnum)
for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -136,7 +136,7 @@ static int verify_eraseblock(int ebnum)
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -146,7 +146,7 @@ static int verify_eraseblock(int ebnum)
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -164,7 +164,7 @@ static int verify_eraseblock(int ebnum)
unsigned long oldnext = next;
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -172,7 +172,7 @@ static int verify_eraseblock(int ebnum)
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -182,7 +182,7 @@ static int verify_eraseblock(int ebnum)
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -231,7 +231,7 @@ static int crosstest(void)
read = 0;
addr = addrn - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -244,7 +244,7 @@ static int crosstest(void)
read = 0;
addr = addrn - pgsize - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -258,7 +258,7 @@ static int crosstest(void)
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp2);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -272,7 +272,7 @@ static int crosstest(void)
addr = addrn - pgsize;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp3);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -286,7 +286,7 @@ static int crosstest(void)
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp4);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -345,7 +345,7 @@ static int erasecrosstest(void)
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -383,7 +383,7 @@ static int erasecrosstest(void)
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -439,7 +439,7 @@ static int erasetest(void)
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
err = mtd->read(mtd, addr0, pgsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -504,6 +504,13 @@ static int __init mtd_pagetest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c
index afe71aa15c4b..550fe51225a7 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/mtd_readtest.c
@@ -29,7 +29,7 @@
#define PRINT_PREF KERN_INFO "mtd_readtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -66,7 +66,7 @@ static int read_eraseblock_by_page(int ebnum)
if (mtd->oobsize) {
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->oobsize;
@@ -75,7 +75,8 @@ static int read_eraseblock_by_page(int ebnum)
ops.datbuf = NULL;
ops.oobbuf = oobbuf;
ret = mtd->read_oob(mtd, addr, &ops);
- if (ret || ops.oobretlen != mtd->oobsize) {
+ if ((ret && !mtd_is_bitflip(ret)) ||
+ ops.oobretlen != mtd->oobsize) {
printk(PRINT_PREF "error: read oob failed at "
"%#llx\n", (long long)addr);
if (!err)
@@ -169,6 +170,12 @@ static int __init mtd_readtest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c
index 627d4e2466a3..493b367bdd35 100644
--- a/drivers/mtd/tests/mtd_speedtest.c
+++ b/drivers/mtd/tests/mtd_speedtest.c
@@ -29,7 +29,7 @@
#define PRINT_PREF KERN_INFO "mtd_speedtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -216,7 +216,7 @@ static int read_eraseblock(int ebnum)
err = mtd->read(mtd, addr, mtd->erasesize, &read, iobuf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != mtd->erasesize) {
printk(PRINT_PREF "error: read failed at %#llx\n", addr);
@@ -237,7 +237,7 @@ static int read_eraseblock_by_page(int ebnum)
for (i = 0; i < pgcnt; i++) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -263,7 +263,7 @@ static int read_eraseblock_by_2pages(int ebnum)
for (i = 0; i < n; i++) {
err = mtd->read(mtd, addr, sz, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != sz) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -278,7 +278,7 @@ static int read_eraseblock_by_2pages(int ebnum)
if (pgcnt % 2) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -361,6 +361,13 @@ static int __init mtd_speedtest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
if (count)
printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
else
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c
index 531625fc9259..52ffd9120e0d 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/mtd_stresstest.c
@@ -30,7 +30,7 @@
#define PRINT_PREF KERN_INFO "mtd_stresstest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -154,7 +154,7 @@ static int do_read(void)
}
addr = eb * mtd->erasesize + offs;
err = mtd->read(mtd, addr, len, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (unlikely(err || read != len)) {
printk(PRINT_PREF "error: read failed at 0x%llx\n",
@@ -250,6 +250,13 @@ static int __init mtd_stresstest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/mtd_subpagetest.c
index 334eae53a3db..1a05bfac4eee 100644
--- a/drivers/mtd/tests/mtd_subpagetest.c
+++ b/drivers/mtd/tests/mtd_subpagetest.c
@@ -29,7 +29,7 @@
#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -198,7 +198,7 @@ static int verify_eraseblock(int ebnum)
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
@@ -226,7 +226,7 @@ static int verify_eraseblock(int ebnum)
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
@@ -264,7 +264,7 @@ static int verify_eraseblock2(int ebnum)
read = 0;
err = mtd->read(mtd, addr, subpgsize * k, &read, readbuf);
if (unlikely(err || read != subpgsize * k)) {
- if (err == -EUCLEAN && read == subpgsize * k) {
+ if (mtd_is_bitflip(err) && read == subpgsize * k) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
@@ -298,7 +298,7 @@ static int verify_eraseblock_ff(int ebnum)
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
@@ -379,6 +379,13 @@ static int __init mtd_subpagetest_init(void)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/mtd_torturetest.c
index 5c6c3d248901..03ab649a6964 100644
--- a/drivers/mtd/tests/mtd_torturetest.c
+++ b/drivers/mtd/tests/mtd_torturetest.c
@@ -46,7 +46,7 @@ static int pgcnt;
module_param(pgcnt, int, S_IRUGO);
MODULE_PARM_DESC(pgcnt, "number of pages per eraseblock to torture (0 => all)");
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
@@ -138,7 +138,7 @@ static inline int check_eraseblock(int ebnum, unsigned char *buf)
retry:
err = mtd->read(mtd, addr, len, &read, check_buf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
printk(PRINT_PREF "single bit flip occurred at EB %d "
"MTD reported that it was fixed.\n", ebnum);
else if (err) {
@@ -213,6 +213,13 @@ static int __init tort_init(void)
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "Warning: this program is trying to wear out your "
"flash, stop it if this is not wanted.\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
ebcnt, eb, eb + ebcnt - 1, dev);
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 4be671815014..fb7f19b62d91 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -443,7 +443,7 @@ retry:
if (err == UBI_IO_BITFLIPS) {
scrub = 1;
err = 0;
- } else if (err == -EBADMSG) {
+ } else if (mtd_is_eccerr(err)) {
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
goto out_unlock;
scrub = 1;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 6ba55c235873..f20b6f22f240 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -172,9 +172,9 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
retry:
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
if (err) {
- const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+ const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
- if (err == -EUCLEAN) {
+ if (mtd_is_bitflip(err)) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
@@ -205,7 +205,7 @@ retry:
* all the requested data. But some buggy drivers might do
* this, so we change it to -EIO.
*/
- if (read != len && err == -EBADMSG) {
+ if (read != len && mtd_is_eccerr(err)) {
ubi_assert(0);
err = -EIO;
}
@@ -469,7 +469,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
out:
mutex_unlock(&ubi->buf_mutex);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* If a bit-flip or data integrity error was detected, the test
* has not passed because it happened on a freshly erased
@@ -760,7 +760,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
if (read_err) {
- if (read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
/*
@@ -776,7 +776,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
magic = be32_to_cpu(ec_hdr->magic);
if (magic != UBI_EC_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
/*
@@ -1032,12 +1032,12 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
p = (char *)vid_hdr - ubi->vid_hdr_shift;
read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (read_err && read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
magic = be32_to_cpu(vid_hdr->magic);
if (magic != UBI_VID_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
@@ -1219,7 +1219,7 @@ static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
return -ENOMEM;
err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -1306,7 +1306,7 @@ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
p = (char *)vid_hdr - ubi->vid_hdr_shift;
err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -1358,7 +1358,7 @@ int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf1);
- if (err && err != -EUCLEAN)
+ if (err && !mtd_is_bitflip(err))
goto out_free;
for (i = 0; i < len; i++) {
@@ -1422,7 +1422,7 @@ int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
- if (err && err != -EUCLEAN) {
+ if (err && !mtd_is_bitflip(err)) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
goto error;
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index d39716e5b204..1a35fc5e3b40 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -410,7 +410,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
return 0;
err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
- if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+ if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn("mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index ff2a65c37f69..f6a7d7ac4b98 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -81,7 +81,7 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
if (err) {
- if (err == -EBADMSG)
+ if (mtd_is_eccerr(err))
err = 1;
break;
}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index a3a198f9b98d..0cb17d936b5a 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -395,7 +395,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
@@ -793,7 +793,7 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
err = ubi_io_read(ubi, ubi->peb_buf1, pnum, ubi->leb_start,
ubi->leb_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* Bit-flips or integrity errors while reading the data area.
* It is difficult to say for sure what type of corruption is
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 4b50a3029b84..9ad18da1891d 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -423,7 +423,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
/*
* Scrub the PEB later. Note, -EBADMSG indicates an
* uncorrectable ECC error, but we have our own CRC and
diff --git a/drivers/staging/spectra/lld_mtd.c b/drivers/staging/spectra/lld_mtd.c
index 2bd34662beb5..a9c309a167c2 100644
--- a/drivers/staging/spectra/lld_mtd.c
+++ b/drivers/staging/spectra/lld_mtd.c
@@ -340,7 +340,7 @@ u16 mtd_Read_Page_Main_Spare(u8 *read_data, u32 Block,
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = read_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = read_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
@@ -400,7 +400,7 @@ u16 mtd_Write_Page_Main_Spare(u8 *write_data, u32 Block,
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = write_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = write_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
@@ -473,7 +473,7 @@ u16 mtd_Read_Page_Spare(u8 *read_data, u32 Block,
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
ops.len = 0;
ops.oobbuf = read_data;
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index de4247021d25..5b6c9d1a2fb9 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -53,6 +53,78 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this,
return 0;
}
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ * If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ * On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ * data. On exit, expected to hold the actual size of the compressed
+ * data.
+ *
+ * Returns: the compression type used. Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+ unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+ struct jffs2_compressor *this;
+ int err, ret = JFFS2_COMPR_NONE;
+ uint32_t orig_slen, orig_dlen;
+ char *output_buf;
+
+ output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+ if (!output_buf) {
+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+ return ret;
+ }
+ orig_slen = *datalen;
+ orig_dlen = *cdatalen;
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ /* Skip decompress-only and disabled modules */
+ if (!this->compress || this->disabled)
+ continue;
+
+ /* Skip if not the desired compression type */
+ if (compr && (compr != this->compr))
+ continue;
+
+ /*
+ * Either compression type was unspecified, or we found our
+ * compressor; either way, we're good to go.
+ */
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+
+ *datalen = orig_slen;
+ *cdatalen = orig_dlen;
+ err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+ spin_lock(&jffs2_compressor_list_lock);
+ this->usecount--;
+ if (!err) {
+ /* Success */
+ ret = this->compr;
+ this->stat_compr_blocks++;
+ this->stat_compr_orig_size += *datalen;
+ this->stat_compr_new_size += *cdatalen;
+ break;
+ }
+ }
+ spin_unlock(&jffs2_compressor_list_lock);
+ if (ret == JFFS2_COMPR_NONE)
+ kfree(output_buf);
+ else
+ *cpage_out = output_buf;
+
+ return ret;
+}
+
/* jffs2_compress:
* @data_in: Pointer to uncompressed data
* @cpage_out: Pointer to returned pointer to buffer for compressed data
@@ -76,47 +148,23 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
uint32_t *datalen, uint32_t *cdatalen)
{
int ret = JFFS2_COMPR_NONE;
- int compr_ret;
+ int mode, compr_ret;
struct jffs2_compressor *this, *best=NULL;
unsigned char *output_buf = NULL, *tmp_buf;
uint32_t orig_slen, orig_dlen;
uint32_t best_slen=0, best_dlen=0;
- switch (jffs2_compression_mode) {
+ if (c->mount_opts.override_compr)
+ mode = c->mount_opts.compr;
+ else
+ mode = jffs2_compression_mode;
+
+ switch (mode) {
case JFFS2_COMPR_MODE_NONE:
break;
case JFFS2_COMPR_MODE_PRIORITY:
- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
- if (!output_buf) {
- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
- goto out;
- }
- orig_slen = *datalen;
- orig_dlen = *cdatalen;
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
-
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- *cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
- spin_lock(&jffs2_compressor_list_lock);
- this->usecount--;
- if (!compr_ret) {
- ret = this->compr;
- this->stat_compr_blocks++;
- this->stat_compr_orig_size += *datalen;
- this->stat_compr_new_size += *cdatalen;
- break;
- }
- }
- spin_unlock(&jffs2_compressor_list_lock);
- if (ret == JFFS2_COMPR_NONE)
- kfree(output_buf);
+ ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+ cdatalen);
break;
case JFFS2_COMPR_MODE_SIZE:
case JFFS2_COMPR_MODE_FAVOURLZO:
@@ -174,22 +222,28 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
best->stat_compr_orig_size += best_slen;
best->stat_compr_new_size += best_dlen;
ret = best->compr;
+ *cpage_out = output_buf;
}
spin_unlock(&jffs2_compressor_list_lock);
break;
+ case JFFS2_COMPR_MODE_FORCELZO:
+ ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
default:
printk(KERN_ERR "JFFS2: unknown compression mode.\n");
}
- out:
+
if (ret == JFFS2_COMPR_NONE) {
*cpage_out = data_in;
*datalen = *cdatalen;
none_stat_compr_blocks++;
none_stat_compr_size += *datalen;
}
- else {
- *cpage_out = output_buf;
- }
return ret;
}
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 13bb7597ab39..5e91d578f4ed 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -40,6 +40,8 @@
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
#define JFFS2_COMPR_MODE_FAVOURLZO 3
+#define JFFS2_COMPR_MODE_FORCELZO 4
+#define JFFS2_COMPR_MODE_FORCEZLIB 5
#define FAVOUR_LZO_PERCENT 80
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 7286e44ac665..4b8afe39a87f 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -379,7 +379,7 @@ void jffs2_dirty_inode(struct inode *inode, int flags)
jffs2_do_setattr(inode, &iattr);
}
-int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
+int jffs2_do_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 0bc6a6c80a56..55a0c1dceadf 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -29,6 +29,11 @@
struct jffs2_inodirty;
+struct jffs2_mount_opts {
+ bool override_compr;
+ unsigned int compr;
+};
+
/* A struct for the overall file system control. Pointers to
jffs2_sb_info structs are named `c' in the source code.
Nee jffs_control
@@ -126,6 +131,7 @@ struct jffs2_sb_info {
#endif
struct jffs2_summary *summary; /* Summary information */
+ struct jffs2_mount_opts mount_opts;
#ifdef CONFIG_JFFS2_FS_XATTR
#define XATTRINDEX_HASHSIZE (57)
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 6c1755c59c0f..ab65ee3ec858 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -176,7 +176,7 @@ void jffs2_dirty_inode(struct inode *inode, int flags);
struct inode *jffs2_new_inode (struct inode *dir_i, umode_t mode,
struct jffs2_raw_inode *ri);
int jffs2_statfs (struct dentry *, struct kstatfs *);
-int jffs2_remount_fs (struct super_block *, int *, char *);
+int jffs2_do_remount_fs(struct super_block *, int *, char *);
int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
void jffs2_gc_release_inode(struct jffs2_sb_info *c,
struct jffs2_inode_info *f);
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 8d8cd3419d02..28107ca136e4 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -275,9 +275,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c)
else
c->mtd->unpoint(c->mtd, 0, c->mtd->size);
#endif
- if (s)
- kfree(s);
-
+ kfree(s);
return ret;
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 853b8e300084..e7e974454115 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -17,11 +17,13 @@
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/mount.h>
+#include <linux/parser.h>
#include <linux/jffs2.h>
#include <linux/pagemap.h>
#include <linux/mtd/super.h>
#include <linux/ctype.h>
#include <linux/namei.h>
+#include <linux/seq_file.h>
#include <linux/exportfs.h>
#include "compr.h"
#include "nodelist.h"
@@ -75,6 +77,37 @@ static void jffs2_write_super(struct super_block *sb)
unlock_super(sb);
}
+static const char *jffs2_compr_name(unsigned int compr)
+{
+ switch (compr) {
+ case JFFS2_COMPR_MODE_NONE:
+ return "none";
+#ifdef CONFIG_JFFS2_LZO
+ case JFFS2_COMPR_MODE_FORCELZO:
+ return "lzo";
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ return "zlib";
+#endif
+ default:
+ /* should never happen; programmer error */
+ WARN_ON(1);
+ return "";
+ }
+}
+
+static int jffs2_show_options(struct seq_file *s, struct vfsmount *mnt)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(mnt->mnt_sb);
+ struct jffs2_mount_opts *opts = &c->mount_opts;
+
+ if (opts->override_compr)
+ seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+
+ return 0;
+}
+
static int jffs2_sync_fs(struct super_block *sb, int wait)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
@@ -133,6 +166,85 @@ static const struct export_operations jffs2_export_ops = {
.fh_to_parent = jffs2_fh_to_parent,
};
+/*
+ * JFFS2 mount options.
+ *
+ * Opt_override_compr: override default compressor
+ * Opt_err: just end of array marker
+ */
+enum {
+ Opt_override_compr,
+ Opt_err,
+};
+
+static const match_table_t tokens = {
+ {Opt_override_compr, "compr=%s"},
+ {Opt_err, NULL},
+};
+
+static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
+{
+ substring_t args[MAX_OPT_ARGS];
+ char *p, *name;
+
+ if (!data)
+ return 0;
+
+ while ((p = strsep(&data, ","))) {
+ int token;
+
+ if (!*p)
+ continue;
+
+ token = match_token(p, tokens, args);
+ switch (token) {
+ case Opt_override_compr:
+ name = match_strdup(&args[0]);
+
+ if (!name)
+ return -ENOMEM;
+ if (!strcmp(name, "none"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_NONE;
+#ifdef CONFIG_JFFS2_LZO
+ else if (!strcmp(name, "lzo"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_FORCELZO;
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ else if (!strcmp(name, "zlib"))
+ c->mount_opts.compr =
+ JFFS2_COMPR_MODE_FORCEZLIB;
+#endif
+ else {
+ printk(KERN_ERR "JFFS2 Error: unknown compressor \"%s\"",
+ name);
+ kfree(name);
+ return -EINVAL;
+ }
+ kfree(name);
+ c->mount_opts.override_compr = true;
+ break;
+ default:
+ printk(KERN_ERR "JFFS2 Error: unrecognized mount option '%s' or missing value\n",
+ p);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int jffs2_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+ int err;
+
+ err = jffs2_parse_options(c, data);
+ if (err)
+ return -EINVAL;
+
+ return jffs2_do_remount_fs(sb, flags, data);
+}
+
static const struct super_operations jffs2_super_operations =
{
.alloc_inode = jffs2_alloc_inode,
@@ -143,6 +255,7 @@ static const struct super_operations jffs2_super_operations =
.remount_fs = jffs2_remount_fs,
.evict_inode = jffs2_evict_inode,
.dirty_inode = jffs2_dirty_inode,
+ .show_options = jffs2_show_options,
.sync_fs = jffs2_sync_fs,
};
@@ -166,6 +279,12 @@ static int jffs2_fill_super(struct super_block *sb, void *data, int silent)
c->os_priv = sb;
sb->s_fs_info = c;
+ ret = jffs2_parse_options(c, data);
+ if (ret) {
+ kfree(c);
+ return -EINVAL;
+ }
+
/* Initialize JFFS2 superblock locks, the further initialization will
* be done later */
mutex_init(&c->alloc_sem);
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 4515bea0268f..b09e51d2f81f 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -578,8 +578,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
if (!jffs2_is_writebuffered(c))
return 0;
- if (mutex_trylock(&c->alloc_sem)) {
- mutex_unlock(&c->alloc_sem);
+ if (!mutex_is_locked(&c->alloc_sem)) {
printk(KERN_CRIT "jffs2_flush_wbuf() called with alloc_sem not locked!\n");
BUG();
}
@@ -1026,7 +1025,7 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c,
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = NR_OOB_SCAN_PAGES * c->oobavail;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -1069,7 +1068,7 @@ int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
struct mtd_oob_ops ops;
int ret, cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -1095,7 +1094,7 @@ int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c,
struct mtd_oob_ops ops;
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = (uint8_t *)&oob_cleanmarker;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 57cc0e63714f..c4eec228eef9 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -86,24 +86,39 @@ struct nand_bbt_descr {
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none exists */
#define NAND_BBT_CREATE 0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000400
+#define NAND_BBT_SCANALLPAGES 0x00000800
/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00000800
+#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
-#define NAND_BBT_WRITE 0x00001000
+#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT 0x00002000
+#define NAND_BBT_SAVECONTENT 0x00004000
/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00004000
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB 0x00400000
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH 0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB 0x00040000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 37be05bbfbc8..9f5b312af783 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -32,17 +32,19 @@
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
-#define MTD_ERASE_PENDING 0x01
+#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
-#define MTD_ERASE_DONE 0x08
-#define MTD_ERASE_FAILED 0x10
+#define MTD_ERASE_DONE 0x08
+#define MTD_ERASE_FAILED 0x10
#define MTD_FAIL_ADDR_UNKNOWN -1LL
-/* If the erase fails, fail_addr might indicate exactly which block failed. If
- fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
- specific to any particular block. */
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
struct erase_info {
struct mtd_info *mtd;
uint64_t addr;
@@ -59,26 +61,12 @@ struct erase_info {
};
struct mtd_erase_region_info {
- uint64_t offset; /* At which this region starts, from the beginning of the MTD */
+ uint64_t offset; /* At which this region starts, from the beginning of the MTD */
uint32_t erasesize; /* For this region */
uint32_t numblocks; /* Number of blocks of erasesize in this region */
unsigned long *lockmap; /* If keeping bitmap of locks */
};
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE: oob data are placed at the given offset
- * MTD_OOB_AUTO: oob data are automatically placed at the free areas
- * which are defined by the ecclayout
- * MTD_OOB_RAW: mode to read oob and data without doing ECC checking
- */
-typedef enum {
- MTD_OOB_PLACE,
- MTD_OOB_AUTO,
- MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
/**
* struct mtd_oob_ops - oob operation operands
* @mode: operation mode
@@ -90,7 +78,7 @@ typedef enum {
* @ooblen: number of oob bytes to write/read
* @oobretlen: number of oob bytes written/read
* @ooboffs: offset of oob data in the oob area (only relevant when
- * mode = MTD_OOB_PLACE)
+ * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
* @datbuf: data buffer - if NULL only oob data are read/written
* @oobbuf: oob data buffer
*
@@ -99,7 +87,7 @@ typedef enum {
* OOB area.
*/
struct mtd_oob_ops {
- mtd_oob_mode_t mode;
+ unsigned int mode;
size_t len;
size_t retlen;
size_t ooblen;
@@ -173,7 +161,7 @@ struct mtd_info {
const char *name;
int index;
- /* ecc layout structure pointer - read only ! */
+ /* ECC layout structure pointer - read only! */
struct nand_ecclayout *ecclayout;
/* Data for variable erase regions. If numeraseregions is zero,
@@ -324,10 +312,15 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
/* Kernel-side ioctl definitions */
struct mtd_partition;
-
-extern int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts);
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+ const char **part_probe_types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *defparts,
+ int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts) \
+ mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
@@ -356,27 +349,16 @@ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
void mtd_erase_callback(struct erase_info *instr);
-/*
- * Debugging macro and defines
- */
-#define MTD_DEBUG_LEVEL0 (0) /* Quiet */
-#define MTD_DEBUG_LEVEL1 (1) /* Audible */
-#define MTD_DEBUG_LEVEL2 (2) /* Loud */
-#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
-
-#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...) \
- do { \
- if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
- printk(KERN_INFO args); \
- } while(0)
-#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) \
- do { \
- if (0) \
- printk(KERN_INFO args); \
- } while(0)
-
-#endif /* CONFIG_MTD_DEBUG */
+static inline int mtd_is_bitflip(int err) {
+ return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+ return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+ return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
#endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c2b9ac4fbc4a..904131bab501 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -42,10 +42,10 @@ extern void nand_release(struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
@@ -150,7 +150,7 @@ typedef enum {
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
/* Bit mask for flags passed to do_nand_read_ecc */
@@ -163,7 +163,7 @@ typedef enum {
*/
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
#define NAND_NO_PADDING 0x00000004
@@ -219,27 +219,15 @@ typedef enum {
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN 0x00020000
+#define NAND_SKIP_BBTSCAN 0x00010000
/*
* This option is defined if the board driver allocates its own buffers
* (e.g. because it needs them DMA-coherent).
*/
-#define NAND_OWN_BUFFERS 0x00040000
+#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV 0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT 0x01000000
+#define NAND_SCAN_SILENT_NODEV 0x00040000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
@@ -331,27 +319,29 @@ struct nand_hw_control {
};
/**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode: ecc mode
- * @steps: number of ecc steps per page
- * @size: data bytes per ecc step
- * @bytes: ecc bytes per step
- * @total: total number of ecc bytes per page
- * @prepad: padding information for syndrome based ecc generators
- * @postpad: padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
- * @hwctl: function to control hardware ecc generator. Must only
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
- * @calculate: function for ecc calculation or readback from ecc hardware
- * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator
+ * @read_page: function to read a page according to the ECC generator
* requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator
+ * @write_page: function to write a page according to the ECC generator
* requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
@@ -380,6 +370,10 @@ struct nand_ecc_ctrl {
uint32_t offs, uint32_t len, uint8_t *buf);
void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd);
int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
int sndcmd);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -388,8 +382,8 @@ struct nand_ecc_ctrl {
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ecc
- * @ecccode: buffer for ecc read from flash
+ * @ecccalc: buffer for calculated ECC
+ * @ecccode: buffer for ECC read from flash
* @databuf: buffer for data - dynamically sized
*
* Do not change the order of buffers. databuf and oobrbuf must be in
@@ -422,7 +416,7 @@ struct nand_buffers {
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
* is read from the chip status register.
@@ -430,17 +424,17 @@ struct nand_buffers {
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
- * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
- * @oob_poi: poison value buffer
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
* @page_shift: [INTERN] number of address bits in a page (column
* address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
@@ -449,6 +443,9 @@ struct nand_buffers {
* @options: [BOARDSPECIFIC] various chip options. They can partly
* be set to inform nand_scan about special functionality.
* See the defines for further explanation.
+ * @bbt_options: [INTERN] bad block specific options. All options used
+ * here must come from bbm.h. By default, these options
+ * will be copied to the appropriate nand_bbt_descr's.
* @badblockpos: [INTERN] position of the bad block marker in the oob
* area.
* @badblockbits: [INTERN] number of bits to left-shift the bad block
@@ -464,7 +461,7 @@ struct nand_buffers {
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -472,9 +469,9 @@ struct nand_buffers {
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
* bad block scan.
* @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independend
+ * structure which is shared among multiple independent
* devices.
- * @priv: [OPTIONAL] pointer to private chip date
+ * @priv: [OPTIONAL] pointer to private chip data
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
@@ -509,6 +506,7 @@ struct nand_chip {
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
int page_shift;
int phys_erase_shift;
@@ -536,8 +534,6 @@ struct nand_chip {
struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
- struct mtd_oob_ops ops;
-
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
@@ -611,10 +607,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
* @partitions: mtd partition list
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
- * @ecclayout: ecc layout info structure
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
- * @set_parts: platform specific function to set partitions
- * @priv: hardware controller specific settings
*/
struct platform_nand_chip {
int nr_chips;
@@ -624,9 +619,8 @@ struct platform_nand_chip {
struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
const char **part_probe_types;
- void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
- void *priv;
};
/* Keep gcc happy */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 52b6f187bf49..4596503c9da9 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -184,6 +184,9 @@ struct onenand_chip {
#define ONENAND_IS_CACHE_PROGRAM(this) \
(this->options & ONENAND_HAS_CACHE_PROGRAM)
+#define ONENAND_IS_NOP_1(this) \
+ (this->options & ONENAND_HAS_NOP_1)
+
/* Check byte access in OneNAND */
#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
@@ -195,6 +198,7 @@ struct onenand_chip {
#define ONENAND_HAS_2PLANE (0x0004)
#define ONENAND_HAS_4KB_PAGE (0x0008)
#define ONENAND_HAS_CACHE_PROGRAM (0x0010)
+#define ONENAND_HAS_NOP_1 (0x0020)
#define ONENAND_SKIP_UNLOCK_CHECK (0x0100)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3a6f0372fc96..2475228c1158 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -24,7 +24,9 @@
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
* defined as MTDPART_OFS_APPEND, the partition will start where the
- * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ * if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ * after the end of partition.
* mask_flags: contains flags that have to be masked (removed) from the
* master MTD flag set for the corresponding MTD partition.
* For example, to force a read-only partition, simply adding
@@ -42,12 +44,25 @@ struct mtd_partition {
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
};
+#define MTDPART_OFS_RETAIN (-3)
#define MTDPART_OFS_NXTBLK (-2)
#define MTDPART_OFS_APPEND (-1)
#define MTDPART_SIZ_FULL (0)
struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+ unsigned long origin;
+ struct device_node *of_node;
+};
+
/*
* Functions dealing with the various ways of partitioning the space
@@ -57,37 +72,12 @@ struct mtd_part_parser {
struct list_head list;
struct module *owner;
const char *name;
- int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+ int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+ struct mtd_part_parser_data *);
};
extern int register_mtd_parser(struct mtd_part_parser *parser);
extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts);
-#else
-static inline int of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static inline int mtd_has_cmdlinepart(void) { return 1; }
-#else
-static inline int mtd_has_cmdlinepart(void) { return 0; }
-#endif
int mtd_is_partition(struct mtd_info *mtd);
int mtd_add_partition(struct mtd_info *master, char *name,
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index e5f21d293c70..04e018160e2b 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -32,21 +32,4 @@ struct physmap_flash_data {
struct mtd_partition *parts;
};
-/*
- * Board needs to specify the exact mapping during their setup time.
- */
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int) );
-
-/*
- * Machines that wish to do flash partition may want to call this function in
- * their setup routine.
- *
- * physmap_set_partitions(mypartitions, num_parts);
- *
- * Note that one can always override this hard-coded partition with
- * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
- */
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
-
#endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 2f7d45bcbd24..1a7e1d20adf9 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -45,6 +45,51 @@ struct mtd_oob_buf64 {
__u64 usr_ptr;
};
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
+ * which are defined by the internal ecclayout
+ * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
+ * this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+ MTD_OPS_PLACE_OOB = 0,
+ MTD_OPS_AUTO_OOB = 1,
+ MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start: start address
+ * @len: length of data buffer
+ * @ooblen: length of OOB buffer
+ * @usr_data: user-provided data buffer
+ * @usr_oob: user-provided OOB buffer
+ * @mode: MTD mode (see "MTD operation modes")
+ * @padding: reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+ __u64 start;
+ __u64 len;
+ __u64 ooblen;
+ __u64 usr_data;
+ __u64 usr_oob;
+ __u8 mode;
+ __u8 padding[7];
+};
+
#define MTD_ABSENT 0
#define MTD_RAM 1
#define MTD_ROM 2
@@ -59,13 +104,13 @@ struct mtd_oob_buf64 {
#define MTD_NO_ERASE 0x1000 /* No erase necessary */
#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
#define MTD_CAP_ROM 0
#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
-/* ECC byte placement */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
@@ -80,21 +125,18 @@ struct mtd_oob_buf64 {
struct mtd_info_user {
__u8 type;
__u32 flags;
- __u32 size; // Total size of the MTD
+ __u32 size; /* Total size of the MTD */
__u32 erasesize;
__u32 writesize;
- __u32 oobsize; // Amount of OOB data per block (e.g. 16)
- /* The below two fields are obsolete and broken, do not use them
- * (TODO: remove at some point) */
- __u32 ecctype;
- __u32 eccsize;
+ __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
+ __u64 padding; /* Old obsolete field; do not use */
};
struct region_info_user {
__u32 offset; /* At which this region starts,
- * from the beginning of the MTD */
- __u32 erasesize; /* For this region */
- __u32 numblocks; /* Number of blocks in this region */
+ * from the beginning of the MTD */
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
__u32 regionindex;
};
@@ -104,29 +146,61 @@ struct otp_info {
__u32 locked;
};
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
#define MEMERASE _IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
#define MEMGETREGIONCOUNT _IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
#define OTPSELECT _IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
#define OTPLOCK _IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
#define MTDFILEMODE _IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req")
+ */
+#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
@@ -177,13 +251,27 @@ struct mtd_ecc_stats {
};
/*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
*/
enum mtd_file_modes {
- MTD_MODE_NORMAL = MTD_OTP_OFF,
- MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
- MTD_MODE_OTP_USER = MTD_OTP_USER,
- MTD_MODE_RAW,
+ MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_FILE_MODE_RAW,
};
#endif /* __MTD_ABI_H__ */