summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFlorian Fainelli <f.fainelli@gmail.com>2021-09-09 20:33:28 +0300
committerDavid S. Miller <davem@davemloft.net>2021-09-10 12:00:08 +0300
commite3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 (patch)
tree50878ce4bfcc80815e3062642562e09bfde5111b
parentbfe84435090a6c85271b02a42b1d83fef9ff7cc7 (diff)
downloadlinux-e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846.tar.xz
r6040: Restore MDIO clock frequency after MAC reset
A number of users have reported that they were not able to get the PHY to successfully link up, especially after commit c36757eb9dee ("net: phy: consider AN_RESTART status when reading link status") where we stopped reading just BMSR, but we also read BMCR to determine the link status. Andrius at NetBSD did a wonderful job at debugging the problem and found out that the MDIO bus clock frequency would be incorrectly set back to its default value which would prevent the MDIO bus controller from reading PHY registers properly. Back when we only read BMSR, if we read all 1s, we could falsely indicate a link status, though in general there is a cable plugged in, so this went unnoticed. After a second read of BMCR was added, a wrong read will lead to the inability to determine a link UP condition which is when it started to be visibly broken, even if it was long before that. The fix consists in restoring the value of the MD_CSR register that was set prior to the MAC reset. Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494 Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function") Reported-by: Andrius V <vezhlys@gmail.com> Reported-by: Darek Strugacz <darek.strugacz@op.pl> Tested-by: Darek Strugacz <darek.strugacz@op.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/rdc/r6040.c9
1 files changed, 8 insertions, 1 deletions
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 4b2eca5e08e2..01ef5efd7bc2 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -119,6 +119,8 @@
#define PHY_ST 0x8A /* PHY status register */
#define MAC_SM 0xAC /* MAC status machine */
#define MAC_SM_RST 0x0002 /* MAC status machine reset */
+#define MD_CSC 0xb6 /* MDC speed control register */
+#define MD_CSC_DEFAULT 0x0030
#define MAC_ID 0xBE /* Identifier register */
#define TX_DCNT 0x80 /* TX descriptor count */
@@ -355,8 +357,9 @@ static void r6040_reset_mac(struct r6040_private *lp)
{
void __iomem *ioaddr = lp->base;
int limit = MAC_DEF_TIMEOUT;
- u16 cmd;
+ u16 cmd, md_csc;
+ md_csc = ioread16(ioaddr + MD_CSC);
iowrite16(MAC_RST, ioaddr + MCR1);
while (limit--) {
cmd = ioread16(ioaddr + MCR1);
@@ -368,6 +371,10 @@ static void r6040_reset_mac(struct r6040_private *lp)
iowrite16(MAC_SM_RST, ioaddr + MAC_SM);
iowrite16(0, ioaddr + MAC_SM);
mdelay(5);
+
+ /* Restore MDIO clock frequency */
+ if (md_csc != MD_CSC_DEFAULT)
+ iowrite16(md_csc, ioaddr + MD_CSC);
}
static void r6040_init_mac_regs(struct net_device *dev)