iio: cros_ec: Add calibscale for 3d MEMS

Add calibration scale support to accel, gyro and magnetometer.

Check on eve with current firmware, check reading calibscale returns 1.0,
check with newer firmware values are applied.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

5 files changed, 57 insertions, 15 deletions

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 17af4e0fd5f8..2af09606c438 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -63,10 +63,35 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 
 		/* Save values */
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
-			st->core.calib[i] =
+			st->core.calib[i].offset =
 				st->core.resp->sensor_offset.offset[i];
 		ret = IIO_VAL_INT;
-		*val = st->core.calib[idx];
+		*val = st->core.calib[idx].offset;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == -EPROTO) {
+			/* Reading calibscale is not supported on older EC. */
+			*val = 1;
+			*val2 = 0;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		} else if (ret) {
+			break;
+		}
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].scale =
+				st->core.resp->sensor_scale.scale[i];
+
+		*val = st->core.calib[idx].scale >> 15;
+		*val2 = ((st->core.calib[idx].scale & 0x7FFF) * 1000000LL) /
+			MOTION_SENSE_DEFAULT_SCALE;
+		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
@@ -134,7 +159,7 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
-		st->core.calib[idx] = val;
+		st->core.calib[idx].offset = val;
 
 		/* Send to EC for each axis, even if not complete */
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
@@ -142,12 +167,27 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 			MOTION_SENSE_SET_OFFSET;
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
 			st->core.param.sensor_offset.offset[i] =
-				st->core.calib[i];
+				st->core.calib[i].offset;
 		st->core.param.sensor_offset.temp =
 			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
 
 		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
 		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.calib[idx].scale = val;
+		/* Send to EC for each axis, even if not complete */
+
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_scale.scale[i] =
+				st->core.calib[i].scale;
+		st->core.param.sensor_scale.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
 	case IIO_CHAN_INFO_SCALE:
 		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
 			ret = -EINVAL;
@@ -206,7 +246,8 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 		/* Common part */
 		channel->info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_CALIBBIAS);
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE);
 		channel->info_mask_shared_by_all =
 			BIT(IIO_CHAN_INFO_SCALE) |
 			BIT(IIO_CHAN_INFO_FREQUENCY) |
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 130362ca421b..96d5aa1f4bd5 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -118,7 +118,7 @@ static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
 	} else {
 		/* Save values */
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
-			st->calib[i] = st->resp->perform_calib.offset[i];
+			st->calib[i].offset = st->resp->perform_calib.offset[i];
 	}
 	mutex_unlock(&st->cmd_lock);
 
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 308ee6ff2e22..b81746a99f1f 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -88,9 +88,10 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
 		}
 
 		/* Save values */
-		st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
+		st->core.calib[0].offset =
+			st->core.resp->sensor_offset.offset[0];
 
-		*val = st->core.calib[idx];
+		*val = st->core.calib[idx].offset;
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
 		/*
@@ -134,11 +135,12 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
-		st->core.calib[idx] = val;
+		st->core.calib[idx].offset = val;
 		/* Send to EC for each axis, even if not complete */
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
 		st->core.param.sensor_offset.flags = MOTION_SENSE_SET_OFFSET;
-		st->core.param.sensor_offset.offset[0] = st->core.calib[0];
+		st->core.param.sensor_offset.offset[0] =
+			st->core.calib[0].offset;
 		st->core.param.sensor_offset.temp =
 					EC_MOTION_SENSE_INVALID_CALIB_TEMP;
 		if (cros_ec_motion_send_host_cmd(&st->core, 0))
@@ -205,8 +207,6 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	channel->ext_info = cros_ec_sensors_ext_info;
 	channel->scan_type.sign = 'u';
 
-	state->core.calib[0] = 0;
-
 	/* Sensor specific */
 	switch (state->core.type) {
 	case MOTIONSENSE_TYPE_LIGHT:
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 034ce98d6e97..d3acba7ba582 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -152,8 +152,6 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	channel->ext_info = cros_ec_sensors_ext_info;
 	channel->scan_type.sign = 'u';
 
-	state->core.calib[0] = 0;
-
 	/* Sensor specific */
 	switch (state->core.type) {
 	case MOTIONSENSE_TYPE_BARO:
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 0c636b9fe8d7..bb03a252bd04 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -62,7 +62,10 @@ struct cros_ec_sensors_core_state {
 	enum motionsensor_type type;
 	enum motionsensor_location loc;
 
-	s16 calib[CROS_EC_SENSOR_MAX_AXIS];
+	struct calib_data {
+		s16 offset;
+		u16 scale;
+	} calib[CROS_EC_SENSOR_MAX_AXIS];
 
 	u8 samples[CROS_EC_SAMPLE_SIZE];