summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorColin Ian King <colin.king@canonical.com>2019-01-14 18:37:01 +0300
committerDavid S. Miller <davem@davemloft.net>2019-01-17 01:04:22 +0300
commiteedfb2234bf77f2c17b68e702ce5c51ed4c72fbd (patch)
tree34bdb3be6f2b6dec476ce5062f332f2e0f6d7d2f
parent9fb0969f75823e59f1af14d587aec279c66bf4a7 (diff)
downloadlinux-eedfb2234bf77f2c17b68e702ce5c51ed4c72fbd.tar.xz
drivers: net: atp: fix various indentation issues
There are various lines that have indentation issues, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/realtek/atp.c27
1 files changed, 15 insertions, 12 deletions
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index 7e011c1c1e6e..cfb67b746595 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -454,14 +454,14 @@ static void hardware_init(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
long ioaddr = dev->base_addr;
- int i;
+ int i;
/* Turn off the printer multiplexer on the 8012. */
for (i = 0; i < 8; i++)
outb(mux_8012[i], ioaddr + PAR_DATA);
write_reg_high(ioaddr, CMR1, CMR1h_RESET);
- for (i = 0; i < 6; i++)
+ for (i = 0; i < 6; i++)
write_reg_byte(ioaddr, PAR0 + i, dev->dev_addr[i]);
write_reg_high(ioaddr, CMR2, lp->addr_mode);
@@ -471,15 +471,15 @@ static void hardware_init(struct net_device *dev)
(read_nibble(ioaddr, CMR2_h) >> 3) & 0x0f);
}
- write_reg(ioaddr, CMR2, CMR2_IRQOUT);
- write_reg_high(ioaddr, CMR1, CMR1h_RxENABLE | CMR1h_TxENABLE);
+ write_reg(ioaddr, CMR2, CMR2_IRQOUT);
+ write_reg_high(ioaddr, CMR1, CMR1h_RxENABLE | CMR1h_TxENABLE);
/* Enable the interrupt line from the serial port. */
outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL);
/* Unmask the interesting interrupts. */
- write_reg(ioaddr, IMR, ISR_RxOK | ISR_TxErr | ISR_TxOK);
- write_reg_high(ioaddr, IMR, ISRh_RxErr);
+ write_reg(ioaddr, IMR, ISR_RxOK | ISR_TxErr | ISR_TxOK);
+ write_reg_high(ioaddr, IMR, ISRh_RxErr);
lp->tx_unit_busy = 0;
lp->pac_cnt_in_tx_buf = 0;
@@ -610,10 +610,12 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance)
write_reg(ioaddr, CMR2, CMR2_NULL);
write_reg(ioaddr, IMR, 0);
- if (net_debug > 5) printk(KERN_DEBUG "%s: In interrupt ", dev->name);
- while (--boguscount > 0) {
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: In interrupt ", dev->name);
+ while (--boguscount > 0) {
int status = read_nibble(ioaddr, ISR);
- if (net_debug > 5) printk("loop status %02x..", status);
+ if (net_debug > 5)
+ printk("loop status %02x..", status);
if (status & (ISR_RxOK<<3)) {
handled = 1;
@@ -640,7 +642,8 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance)
} while (--boguscount > 0);
} else if (status & ((ISR_TxErr + ISR_TxOK)<<3)) {
handled = 1;
- if (net_debug > 6) printk("handling Tx done..");
+ if (net_debug > 6)
+ printk("handling Tx done..");
/* Clear the Tx interrupt. We should check for too many failures
and reinitialize the adapter. */
write_reg(ioaddr, ISR, ISR_TxErr + ISR_TxOK);
@@ -680,7 +683,7 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance)
break;
} else
break;
- }
+ }
/* This following code fixes a rare (and very difficult to track down)
problem where the adapter forgets its ethernet address. */
@@ -694,7 +697,7 @@ static irqreturn_t atp_interrupt(int irq, void *dev_instance)
}
/* Tell the adapter that it can go back to using the output line as IRQ. */
- write_reg(ioaddr, CMR2, CMR2_IRQOUT);
+ write_reg(ioaddr, CMR2, CMR2_IRQOUT);
/* Enable the physical interrupt line, which is sure to be low until.. */
outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL);
/* .. we enable the interrupt sources. */