diff options
author | Vaishnav Achath <vaishnav.a@ti.com> | 2024-02-15 11:55:14 +0300 |
---|---|---|
committer | Vignesh Raghavendra <vigneshr@ti.com> | 2024-02-19 07:26:39 +0300 |
commit | f87c88947396674586a42a163b72efa3999e3dee (patch) | |
tree | 8cfc00bfb6fa8919636b6d2fa08e5f36739fd88d | |
parent | 12d82b15b94c2b44bee7c8c90682850d3ad9b120 (diff) | |
download | linux-f87c88947396674586a42a163b72efa3999e3dee.tar.xz |
arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux
J721E SK has the CSI2RX routed to a MIPI CSI connector and to 15-pin
RPi camera connector through an analog mux with GPIO control, model that
so that an overlay can control the mux state according to connected
cameras. Also provide labels to the I2C mux bus instances so that a
generic overlay can be used across multiple platforms.
J721E SK schematics: https://www.ti.com/lit/zip/sprr438
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-6-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
-rw-r--r-- | arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 19 |
1 files changed, 17 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 1da06e0479f2..0c4575ad8d7c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -286,6 +286,15 @@ }; }; }; + + csi_mux: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_csi_mux_sel_pins_default>; + }; }; &main_pmx0 { @@ -352,6 +361,12 @@ >; }; + main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ @@ -858,14 +873,14 @@ reg = <0x70>; /* CSI0 I2C */ - i2c@0 { + cam0_i2c: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; /* CSI1 I2C */ - i2c@1 { + cam1_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; |