summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2014-05-31 08:44:32 +0400
committerOlof Johansson <olof@lixom.net>2014-05-31 08:44:49 +0400
commitfe388fac0f18010688032393d042807261791eaf (patch)
treea8893162201072ead0fb353063216b918335fa60
parent8792f59213c3fc39a7f407f27975cce38fbb1b6d (diff)
parent9dfa92ec4033c348aae6bafc1881e07229fabaa6 (diff)
downloadlinux-fe388fac0f18010688032393d042807261791eaf.tar.xz
Merge tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Samsung Exynos updates for 3.16 - add new SoCs support : exynos3250, 5260, 5410 and 5800 - enable multi-platform on exynos : consolidate exynos related Kconfig entries * tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits) ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ... Signed-off-by: Olof Johansson <olof@lixom.net>
-rw-r--r--arch/arm/Kconfig20
-rw-r--r--arch/arm/Kconfig.debug54
-rw-r--r--arch/arm/boot/compressed/head.S5
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts12
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi18
-rw-r--r--arch/arm/configs/exynos_defconfig1
-rw-r--r--arch/arm/include/debug/s3c24xx.S46
-rw-r--r--arch/arm/mach-exynos/Kconfig92
-rw-r--r--arch/arm/mach-exynos/Makefile9
-rw-r--r--arch/arm/mach-exynos/common.h99
-rw-r--r--arch/arm/mach-exynos/cpuidle.c1
-rw-r--r--arch/arm/mach-exynos/exynos.c16
-rw-r--r--arch/arm/mach-exynos/firmware.c20
-rw-r--r--arch/arm/mach-exynos/hotplug.c65
-rw-r--r--arch/arm/mach-exynos/platsmp.c4
-rw-r--r--arch/arm/mach-exynos/pm.c1
-rw-r--r--arch/arm/mach-exynos/pmu.c2
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig28
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/debug-macro.S101
-rw-r--r--arch/arm/plat-samsung/Makefile3
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h61
-rw-r--r--drivers/cpufreq/exynos-cpufreq.c19
-rw-r--r--drivers/cpufreq/exynos-cpufreq.h8
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c11
24 files changed, 312 insertions, 384 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8071171b149a..506bf5d32874 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -828,26 +828,6 @@ config ARCH_S5PV210
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS
- bool "Samsung EXYNOS"
- select ARCH_HAS_CPUFREQ
- select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
- select ARCH_SPARSEMEM_ENABLE
- select ARM_GIC
- select COMMON_CLK_SAMSUNG
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_MEMORY_H
- select SPARSE_IRQ
- select SRAM
- select USE_OF
- help
- Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 149d1f02ea23..8f90595069a1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -616,6 +616,7 @@ choice
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C24XX_UART if ARCH_S3C24XX
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -628,6 +629,7 @@ choice
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C24XX_UART if ARCH_S3C24XX
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -640,6 +642,7 @@ choice
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C24XX_UART if ARCH_S3C24XX
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -661,6 +664,33 @@ choice
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_S3C2410_UART0
+ depends on ARCH_S3C24XX
+ select DEBUG_S3C2410_UART
+ bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_S3C2410_UART1
+ depends on ARCH_S3C24XX
+ select DEBUG_S3C2410_UART
+ bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_S3C2410_UART2
+ depends on ARCH_S3C24XX
+ select DEBUG_S3C2410_UART
+ bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
@@ -912,6 +942,13 @@ endchoice
config DEBUG_EXYNOS_UART
bool
+config DEBUG_S3C2410_UART
+ bool
+ select DEBUG_S3C24XX_UART
+
+config DEBUG_S3C24XX_UART
+ bool
+
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
@@ -971,6 +1008,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SX_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+ default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1027,6 +1065,12 @@ config DEBUG_UART_PHYS
default 0x40090000 if ARCH_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if ARCH_GEMINI
+ default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+ DEBUG_S3C2410_UART0)
+ default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+ DEBUG_S3C2410_UART1)
+ default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+ DEBUG_S3C2410_UART2)
default 0x7c0003f8 if FOOTBRIDGE
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
@@ -1059,7 +1103,7 @@ config DEBUG_UART_PHYS
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
- DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1077,6 +1121,12 @@ config DEBUG_UART_VIRT
default 0xf2100000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
+ default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+ DEBUG_S3C2410_UART0)
+ default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+ DEBUG_S3C2410_UART1)
+ default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+ DEBUG_S3C2410_UART2)
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1120,7 +1170,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
- DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 066b03480b63..3a8b32df6b31 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -60,11 +60,6 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
- .macro loadsp, rb, tmp
- mov \rb, #0x50000000
- add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
- .endm
#else
.macro loadsp, rb, tmp
addruart \rb, \tmp
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 80a3bf4c5986..896a2a6619e0 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -364,16 +364,4 @@
gpio-key,wakeup;
};
};
-
- amba {
- mdma1: mdma@11C10000 {
- /*
- * MDMA1 can support both secure and non-secure
- * AXI transactions. When this is enabled in the kernel
- * for boards that run in secure mode, we are getting
- * imprecise external aborts causing the kernel to oops.
- */
- status = "disabled";
- };
- };
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 3c530722e8dc..638efd5a8456 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -264,16 +264,6 @@
reg = <0x100440C0 0x20>;
};
- mau_pd: power-domain@100440E0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440E0 0x20>;
- };
-
- g2d_pd: power-domain@10044100 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044100 0x20>;
- };
-
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
@@ -381,6 +371,13 @@
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
+ /*
+ * MDMA1 can support both secure and non-secure
+ * AXI transactions. When this is enabled in the kernel
+ * for boards that run in secure mode, we are getting
+ * imprecise external aborts causing the kernel to oops.
+ */
+ status = "disabled";
};
};
@@ -775,6 +772,5 @@
interrupts = <0 112 0>;
clocks = <&clock 471>;
clock-names = "secss";
- samsung,power-domain = <&g2d_pd>;
};
};
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 4ce7b70ea901..e07a227ec0db 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
new file mode 100644
index 000000000000..b1f54dc4888c
--- /dev/null
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2005 Simtec Electronics
+ *
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_s3c.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, = CONFIG_DEBUG_UART_PHYS
+ ldr \rv, = CONFIG_DEBUG_UART_VIRT
+ .endm
+
+ .macro fifo_full_s3c2410 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ tst \rd, #S3C2410_UFSTAT_TXFULL
+ .endm
+
+ .macro fifo_level_s3c2410 rd, rx
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
+ and \rd, \rd, #S3C2410_UFSTAT_TXMASK
+ .endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_DEBUG_S3C2410_UART)
+#define fifo_full fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 1602abce6ec0..d58995c9a95a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,97 +7,102 @@
# Configuration options for the EXYNOS4
+config ARCH_EXYNOS
+ bool "Samsung EXYNOS" if ARCH_MULTI_V7
+ select ARCH_HAS_BANDGAP
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select COMMON_CLK_SAMSUNG
+ select HAVE_ARM_SCU if SMP
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
+ select PINCTRL
+ select PINCTRL_EXYNOS
+ select PM_GENERIC_DOMAINS if PM_RUNTIME
+ select S5P_DEV_MFC
+ select SRAM
+ help
+ Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
+
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
+config ARCH_EXYNOS3
+ bool "SAMSUNG EXYNOS3"
+ select ARM_CPU_SUSPEND if PM
+ help
+ Samsung EXYNOS3 (Crotex-A7) SoC based systems
+
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
- select ARM_AMBA
- select CLKSRC_OF
+ select ARM_CPU_SUSPEND if PM_SLEEP
select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select GIC_NON_BANKED
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
- select HAVE_ARM_SCU if SMP
- select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_DEV_MFC
help
- Samsung EXYNOS4 SoCs based systems
+ Samsung EXYNOS4 (Cortex-A9) SoC based systems
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
- select ARM_AMBA
- select CLKSRC_OF
- select HAVE_ARM_SCU if SMP
- select HAVE_SMP
- select PINCTRL
+ default y
help
- Samsung EXYNOS5 (Cortex-A15) SoC based systems
+ Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems
comment "EXYNOS SoCs"
+config SOC_EXYNOS3250
+ bool "SAMSUNG EXYNOS3250"
+ default y
+ depends on ARCH_EXYNOS3
+
config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select ARM_CPU_SUSPEND if PM_SLEEP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4210 CPU support
config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4212 SoC support
config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS4412 SoC support
config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
- select ARCH_HAS_BANDGAP
- select PINCTRL_EXYNOS
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_DEV_MFC
- select SAMSUNG_DMADEV
- help
- Enable EXYNOS5250 SoC support
+
+config SOC_EXYNOS5260
+ bool "SAMSUNG EXYNOS5260"
+ default y
+ depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5410
+ bool "SAMSUNG EXYNOS5410"
+ default y
+ depends on ARCH_EXYNOS5
config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
- select PM_GENERIC_DOMAINS if PM_RUNTIME
- help
- Enable EXYNOS5420 SoC support
config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_HAS_BANDGAP
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
@@ -108,6 +113,11 @@ config SOC_EXYNOS5440
help
Enable EXYNOS5440 SoC support
+config SOC_EXYNOS5800
+ bool "SAMSUNG EXYNOS5800"
+ default y
+ depends on SOC_EXYNOS5420
+
endmenu
config EXYNOS5420_MCPM
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 01bc9b94a032..97af694291f1 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -5,6 +5,8 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
obj-y :=
obj-m :=
obj-n :=
@@ -12,21 +14,16 @@ obj- :=
# Core
-obj-$(CONFIG_ARCH_EXYNOS) += exynos.o
+obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_ARCH_EXYNOS) += pmu.o
-
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o
-obj-$(CONFIG_ARCH_EXYNOS) += firmware.o
-
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 7876ed04b7a5..5dba5a1ee6c2 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,102 @@
#include <linux/reboot.h>
#include <linux/of.h>
+#define EXYNOS3250_SOC_ID 0xE3472000
+#define EXYNOS3_SOC_MASK 0xFFFFF000
+
+#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
+#define EXYNOS4412_CPU_ID 0xE4412200
+#define EXYNOS4_CPU_MASK 0xFFFE0000
+
+#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5410_SOC_ID 0xE5410000
+#define EXYNOS5420_SOC_ID 0xE5420000
+#define EXYNOS5440_SOC_ID 0xE5440000
+#define EXYNOS5800_SOC_ID 0xE5422000
+#define EXYNOS5_SOC_MASK 0xFFFFF000
+
+extern unsigned long samsung_cpu_id;
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+# define soc_is_exynos3250() is_samsung_exynos3250()
+#else
+# define soc_is_exynos3250() 0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210() is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412() is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412() 0
+#endif
+
+#define EXYNOS4210_REV_0 (0x0)
+#define EXYNOS4210_REV_1_0 (0x10)
+#define EXYNOS4210_REV_1_1 (0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250() is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410() is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420() is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440() is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5800)
+# define soc_is_exynos5800() is_samsung_exynos5800()
+#else
+# define soc_is_exynos5800() 0
+#endif
+
+#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
+ soc_is_exynos4412())
+#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
+ soc_is_exynos5420() || soc_is_exynos5800())
+
void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
struct map_desc;
@@ -70,4 +166,7 @@ extern void exynos_cluster_power_down(int cluster);
extern void exynos_cluster_power_up(int cluster);
extern int exynos_cluster_power_state(int cluster);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+extern unsigned int samsung_rev(void);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index c57cae0e8779..3dd385ebf195 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -24,7 +24,6 @@
#include <asm/unified.h>
#include <asm/cpuidle.h>
-#include <plat/cpu.h>
#include <plat/pm.h>
#include <mach/map.h>
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index e973ff5de7b3..d51d5af7e7df 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -26,8 +26,6 @@
#include <asm/mach/map.h>
#include <asm/memory.h>
-#include <plat/cpu.h>
-
#include "common.h"
#include "mfc.h"
#include "regs-pmu.h"
@@ -244,17 +242,6 @@ void __init exynos_init_io(void)
exynos_map_io();
}
-struct bus_type exynos_subsys = {
- .name = "exynos-core",
- .dev_name = "exynos-core",
-};
-
-static int __init exynos_core_init(void)
-{
- return subsys_system_register(&exynos_subsys, NULL);
-}
-core_initcall(exynos_core_init);
-
static int __init exynos4_l2x0_cache_init(void)
{
int ret;
@@ -306,12 +293,15 @@ static void __init exynos_dt_machine_init(void)
}
static char const *exynos_dt_compat[] __initconst = {
+ "samsung,exynos3",
+ "samsung,exynos3250",
"samsung,exynos4",
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
"samsung,exynos5",
"samsung,exynos5250",
+ "samsung,exynos5260",
"samsung,exynos5420",
"samsung,exynos5440",
NULL
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 483dfcd69065..eb91d2350f8c 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -29,6 +29,21 @@ static int exynos_do_idle(void)
static int exynos_cpu_boot(int cpu)
{
+ /*
+ * Exynos3250 doesn't need to send smc command for secondary CPU boot
+ * because Exynos3250 removes WFE in secure mode.
+ */
+ if (soc_is_exynos3250())
+ return 0;
+
+ /*
+ * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+ * But, Exynos4212 has only one secondary CPU so second parameter
+ * isn't used for informing secure firmware about CPU id.
+ */
+ if (soc_is_exynos4212())
+ cpu = 0;
+
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
@@ -40,7 +55,10 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
if (!sysram_ns_base_addr)
return -ENODEV;
- boot_reg = sysram_ns_base_addr + 0x1c + 4*cpu;
+ boot_reg = sysram_ns_base_addr + 0x1c;
+
+ if (!soc_is_exynos4212() && !soc_is_exynos3250())
+ boot_reg += 4*cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 609c99ca59c4..69fa48397394 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -19,61 +19,9 @@
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-#include <plat/cpu.h>
-
#include "common.h"
#include "regs-pmu.h"
-static inline void cpu_enter_lowpower_a9(void)
-{
- unsigned int v;
-
- asm volatile(
- " mcr p15, 0, %1, c7, c5, 0\n"
- " mcr p15, 0, %1, c7, c10, 4\n"
- /*
- * Turn off coherency
- */
- " mrc p15, 0, %0, c1, c0, 1\n"
- " bic %0, %0, %3\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- " mrc p15, 0, %0, c1, c0, 0\n"
- " bic %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- : "=&r" (v)
- : "r" (0), "Ir" (CR_C), "Ir" (0x40)
- : "cc");
-}
-
-static inline void cpu_enter_lowpower_a15(void)
-{
- unsigned int v;
-
- asm volatile(
- " mrc p15, 0, %0, c1, c0, 0\n"
- " bic %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- : "=&r" (v)
- : "Ir" (CR_C)
- : "cc");
-
- flush_cache_louis();
-
- asm volatile(
- /*
- * Turn off coherency
- */
- " mrc p15, 0, %0, c1, c0, 1\n"
- " bic %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- : "=&r" (v)
- : "Ir" (0x40)
- : "cc");
-
- isb();
- dsb();
-}
-
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
@@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
- int primary_part = 0;
- /*
- * we're ready for shutdown now, so do it.
- * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
- * number by reading the Main ID register and then perform the
- * appropriate sequence for entering low power.
- */
- asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
- if ((primary_part & 0xfff0) == 0xc0f0)
- cpu_enter_lowpower_a15();
- else
- cpu_enter_lowpower_a9();
+ v7_exit_coherency_flush(louis);
platform_do_lowpower(cpu, &spurious);
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 78002c7344b3..112bc66927a1 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -27,8 +27,6 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
-#include <plat/cpu.h>
-
#include "common.h"
#include "regs-pmu.h"
@@ -72,7 +70,7 @@ static inline void __iomem *cpu_boot_reg(int cpu)
return ERR_PTR(-ENODEV);
if (soc_is_exynos4412())
boot_reg += 4*cpu;
- else if (soc_is_exynos5420())
+ else if (soc_is_exynos5420() || soc_is_exynos5800())
boot_reg += 4;
return boot_reg;
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 3f2ae864582e..aba2ff6e443d 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -26,7 +26,6 @@
#include <asm/smp_scu.h>
#include <asm/suspend.h>
-#include <plat/cpu.h>
#include <plat/pm-common.h>
#include <plat/pll.h>
#include <plat/regs-srom.h>
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 05c7ce15322a..fb0deda3b3a4 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -13,8 +13,6 @@
#include <linux/kernel.h>
#include <linux/bug.h>
-#include <plat/cpu.h>
-
#include "common.h"
#include "regs-pmu.h"
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 1e52b6926374..04284de7aca5 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,6 @@ config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
- select CPU_LLSERIAL_S3C2410
select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
@@ -41,7 +40,6 @@ config CPU_S3C2410
config CPU_S3C2412
bool "SAMSUNG S3C2412"
select CPU_ARM926T
- select CPU_LLSERIAL_S3C2440
select S3C2412_COMMON_CLK
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
@@ -51,7 +49,6 @@ config CPU_S3C2412
config CPU_S3C2416
bool "SAMSUNG S3C2416/S3C2450"
select CPU_ARM926T
- select CPU_LLSERIAL_S3C2440
select S3C2416_PM if PM
select S3C2443_COMMON_CLK
select S3C2443_DMA if S3C24XX_DMA
@@ -61,7 +58,6 @@ config CPU_S3C2416
config CPU_S3C2440
bool "SAMSUNG S3C2440"
select CPU_ARM920T
- select CPU_LLSERIAL_S3C2440
select S3C2410_COMMON_CLK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
@@ -71,7 +67,6 @@ config CPU_S3C2440
config CPU_S3C2442
bool "SAMSUNG S3C2442"
select CPU_ARM920T
- select CPU_LLSERIAL_S3C2440
select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select S3C2410_PM if PM
@@ -86,7 +81,6 @@ config CPU_S3C244X
config CPU_S3C2443
bool "SAMSUNG S3C2443"
select CPU_ARM920T
- select CPU_LLSERIAL_S3C2440
select S3C2443_COMMON_CLK
select S3C2443_DMA if S3C24XX_DMA
help
@@ -148,28 +142,6 @@ config S3C2410_PM
help
Power Management code common to S3C2410 and better
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
- bool
- help
- Selected if there is an S3C2410 (or register compatible) serial
- low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
- bool
- help
- Selected if there is an S3C2440 (or register compatible) serial
- low-level implementation needed
-
config S3C24XX_PLL
bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
depends on ARM_S3C24XX_CPUFREQ
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
deleted file mode 100644
index 2f39737544c0..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2005 Simtec Electronics
- *
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <linux/serial_s3c.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C24XX_PA_UART
- ldr \rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
- .macro fifo_full_s3c24xx rd, rx
- @ check for arm920 vs arm926. currently assume all arm926
- @ devices have an 64 byte FIFO identical to the s3c2440
- mrc p15, 0, \rd, c0, c0
- and \rd, \rd, #0xff0
- teq \rd, #0x260
- beq 1004f
- mrc p15, 0, \rd, c1, c0
- tst \rd, #1
- addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
- addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
- bic \rd, \rd, #0xff000
- ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
- and \rd, \rd, #0x00ff0000
- teq \rd, #0x00440000 @ is it 2440?
-1004:
- ldr \rd, [\rx, # S3C2410_UFSTAT]
- moveq \rd, \rd, lsr #SHIFT_2440TXF
- tst \rd, #S3C2410_UFSTAT_TXFULL
- .endm
-
- .macro fifo_full_s3c2410 rd, rx
- ldr \rd, [\rx, # S3C2410_UFSTAT]
- tst \rd, #S3C2410_UFSTAT_TXFULL
- .endm
-
-/* fifo level reading */
-
- .macro fifo_level_s3c24xx rd, rx
- @ check for arm920 vs arm926. currently assume all arm926
- @ devices have an 64 byte FIFO identical to the s3c2440
- mrc p15, 0, \rd, c0, c0
- and \rd, \rd, #0xff0
- teq \rd, #0x260
- beq 10000f
- mrc p15, 0, \rd, c1, c0
- tst \rd, #1
- addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
- addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
- bic \rd, \rd, #0xff000
- ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
- and \rd, \rd, #0x00ff0000
- teq \rd, #0x00440000 @ is it 2440?
-
-10000:
- ldr \rd, [\rx, # S3C2410_UFSTAT]
- andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
- andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
- .endm
-
- .macro fifo_level_s3c2410 rd, rx
- ldr \rd, [\rx, # S3C2410_UFSTAT]
- and \rd, \rd, #S3C2410_UFSTAT_TXMASK
- .endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 25c826ed3b65..5e5beaa9ae15 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include
+
obj-y :=
obj-m :=
obj-n := dummy.o
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 5992b8dd9b89..5a237db9f9eb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id;
#define S5PV210_CPU_ID 0x43110000
#define S5PV210_CPU_MASK 0xFFFFF000
-#define EXYNOS4210_CPU_ID 0x43210000
-#define EXYNOS4212_CPU_ID 0x43220000
-#define EXYNOS4412_CPU_ID 0xE4412200
-#define EXYNOS4_CPU_MASK 0xFFFE0000
-
-#define EXYNOS5250_SOC_ID 0x43520000
-#define EXYNOS5420_SOC_ID 0xE5420000
-#define EXYNOS5440_SOC_ID 0xE5440000
-#define EXYNOS5_SOC_MASK 0xFFFFF000
-
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
@@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_s5pv210() 0
#endif
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210() is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210() 0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212() is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212() 0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412() is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412() 0
-#endif
-
-#define EXYNOS4210_REV_0 (0x0)
-#define EXYNOS4210_REV_1_0 (0x10)
-#define EXYNOS4210_REV_1_1 (0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250() is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250() 0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-# define soc_is_exynos5420() is_samsung_exynos5420()
-#else
-# define soc_is_exynos5420() 0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440() is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440() 0
-#endif
-
-#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
- soc_is_exynos4412())
-#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
-
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef KHZ
@@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
extern struct bus_type s5p64x0_subsys;
extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos_subsys;
extern void (*s5pc1xx_idle)(void);
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f99cfe24e7bc..e8a4a7ed38c1 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <plat/cpu.h>
@@ -163,14 +164,22 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
if (!exynos_info)
return -ENOMEM;
- if (soc_is_exynos4210())
+ if (of_machine_is_compatible("samsung,exynos4210")) {
+ exynos_info->type = EXYNOS_SOC_4210;
ret = exynos4210_cpufreq_init(exynos_info);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
+ } else if (of_machine_is_compatible("samsung,exynos4212")) {
+ exynos_info->type = EXYNOS_SOC_4212;
ret = exynos4x12_cpufreq_init(exynos_info);
- else if (soc_is_exynos5250())
+ } else if (of_machine_is_compatible("samsung,exynos4412")) {
+ exynos_info->type = EXYNOS_SOC_4412;
+ ret = exynos4x12_cpufreq_init(exynos_info);
+ } else if (of_machine_is_compatible("samsung,exynos5250")) {
+ exynos_info->type = EXYNOS_SOC_5250;
ret = exynos5250_cpufreq_init(exynos_info);
- else
- return 0;
+ } else {
+ pr_err("%s: Unknown SoC type\n", __func__);
+ return -ENODEV;
+ }
if (ret)
goto err_vdd_arm;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 3ddade8a5125..f189547bb447 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -17,6 +17,13 @@ enum cpufreq_level_index {
L20,
};
+enum exynos_soc_type {
+ EXYNOS_SOC_4210,
+ EXYNOS_SOC_4212,
+ EXYNOS_SOC_4412,
+ EXYNOS_SOC_5250,
+};
+
#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
{ \
.freq = (f) * 1000, \
@@ -34,6 +41,7 @@ struct apll_freq {
};
struct exynos_dvfs_info {
+ enum exynos_soc_type type;
unsigned long mpll_freq_khz;
unsigned int pll_safe_idx;
struct clk *cpu_clk;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 466c76ad335b..63a3907ce578 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -100,7 +100,6 @@ static struct apll_freq apll_freq_4412[] = {
static void exynos4x12_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
- unsigned int stat_cpu1;
/* Change Divider - CPU0 */
@@ -115,13 +114,11 @@ static void exynos4x12_set_clkdiv(unsigned int div_index)
tmp = apll_freq_4x12[div_index].clk_div_cpu1;
__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
- if (soc_is_exynos4212())
- stat_cpu1 = 0x11;
- else
- stat_cpu1 = 0x111;
- while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+ do {
cpu_relax();
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+ } while (tmp != 0x0);
}
static void exynos4x12_set_apll(unsigned int index)
@@ -184,7 +181,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
if (IS_ERR(mout_apll))
goto err_mout_apll;
- if (soc_is_exynos4212())
+ if (info->type == EXYNOS_SOC_4212)
apll_freq_4x12 = apll_freq_4212;
else
apll_freq_4x12 = apll_freq_4412;