summaryrefslogtreecommitdiff
path: root/Documentation/VGA-softcursor.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/VGA-softcursor.txt
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/VGA-softcursor.txt')
-rw-r--r--Documentation/VGA-softcursor.txt39
1 files changed, 39 insertions, 0 deletions
diff --git a/Documentation/VGA-softcursor.txt b/Documentation/VGA-softcursor.txt
new file mode 100644
index 000000000000..70acfbf399eb
--- /dev/null
+++ b/Documentation/VGA-softcursor.txt
@@ -0,0 +1,39 @@
+Software cursor for VGA by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz>
+======================= and Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+
+ Linux now has some ability to manipulate cursor appearance. Normally, you
+can set the size of hardware cursor (and also work around some ugly bugs in
+those miserable Trident cards--see #define TRIDENT_GLITCH in drivers/video/
+vgacon.c). You can now play a few new tricks: you can make your cursor look
+like a non-blinking red block, make it inverse background of the character it's
+over or to highlight that character and still choose whether the original
+hardware cursor should remain visible or not. There may be other things I have
+never thought of.
+
+ The cursor appearance is controlled by a "<ESC>[?1;2;3c" escape sequence
+where 1, 2 and 3 are parameters described below. If you omit any of them,
+they will default to zeroes.
+
+ Parameter 1 specifies cursor size (0=default, 1=invisible, 2=underline, ...,
+8=full block) + 16 if you want the software cursor to be applied + 32 if you
+want to always change the background color + 64 if you dislike having the
+background the same as the foreground. Highlights are ignored for the last two
+flags.
+
+ The second parameter selects character attribute bits you want to change
+(by simply XORing them with the value of this parameter). On standard VGA,
+the high four bits specify background and the low four the foreground. In both
+groups, low three bits set color (as in normal color codes used by the console)
+and the most significant one turns on highlight (or sometimes blinking--it
+depends on the configuration of your VGA).
+
+ The third parameter consists of character attribute bits you want to set.
+Bit setting takes place before bit toggling, so you can simply clear a bit by
+including it in both the set mask and the toggle mask.
+
+Examples:
+=========
+
+To get normal blinking underline, use: echo -e '\033[?2c'
+To get blinking block, use: echo -e '\033[?6c'
+To get red non-blinking block, use: echo -e '\033[?17;0;64c'