diff options
author | Matthew Sakai <msakai@redhat.com> | 2024-02-03 07:32:03 +0300 |
---|---|---|
committer | Mike Snitzer <snitzer@kernel.org> | 2024-02-20 21:43:18 +0300 |
commit | 512039b41b08177dce08f5cf324f2f57f9629639 (patch) | |
tree | 50810da389913885ec75b7d9023eb4414ac25320 /Documentation/admin-guide/device-mapper | |
parent | a03652238d252e6c8a138f04eec71a90e0a99379 (diff) | |
download | linux-512039b41b08177dce08f5cf324f2f57f9629639.tar.xz |
dm vdo: add vio life cycle details to design doc
Add more documentation details for most aspects of the data_vio
read and write processes. Also correct a few minor errors and
rewrite some text for clarity.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Diffstat (limited to 'Documentation/admin-guide/device-mapper')
-rw-r--r-- | Documentation/admin-guide/device-mapper/vdo-design.rst | 674 |
1 files changed, 446 insertions, 228 deletions
diff --git a/Documentation/admin-guide/device-mapper/vdo-design.rst b/Documentation/admin-guide/device-mapper/vdo-design.rst index c82d51071c7d..3cd59decbec0 100644 --- a/Documentation/admin-guide/device-mapper/vdo-design.rst +++ b/Documentation/admin-guide/device-mapper/vdo-design.rst @@ -38,19 +38,27 @@ structures involved in a single write operation to a vdo target is larger than most other targets. Furthermore, because vdo must operate on small block sizes in order to achieve good deduplication rates, acceptable performance can only be achieved through parallelism. Therefore, vdo's -design attempts to be lock-free. Most of a vdo's main data structures are -designed to be easily divided into "zones" such that any given bio must -only access a single zone of any zoned structure. Safety with minimal -locking is achieved by ensuring that during normal operation, each zone is -assigned to a specific thread, and only that thread will access the portion -of that data structure in that zone. Associated with each thread is a work -queue. Each bio is associated with a request object which can be added to a -work queue when the next phase of its operation requires access to the -structures in the zone associated with that queue. Although each structure -may be divided into zones, this division is not reflected in the on-disk -representation of each data structure. Therefore, the number of zones for -each structure, and hence the number of threads, is configured each time a -vdo target is started. +design attempts to be lock-free. + +Most of a vdo's main data structures are designed to be easily divided into +"zones" such that any given bio must only access a single zone of any zoned +structure. Safety with minimal locking is achieved by ensuring that during +normal operation, each zone is assigned to a specific thread, and only that +thread will access the portion of the data structure in that zone. +Associated with each thread is a work queue. Each bio is associated with a +request object (the "data_vio") which will be added to a work queue when +the next phase of its operation requires access to the structures in the +zone associated with that queue. + +Another way of thinking about this arrangement is that the work queue for +each zone has an implicit lock on the structures it manages for all its +operations, because vdo guarantees that no other thread will alter those +structures. + +Although each structure is divided into zones, this division is not +reflected in the on-disk representation of each data structure. Therefore, +the number of zones for each structure, and hence the number of threads, +can be reconfigured each time a vdo target is started. The Deduplication Index ----------------------- @@ -75,17 +83,17 @@ is sufficient to find and eliminate most of the redundancy. Each block of data is hashed to produce a 16-byte block name. An index record consists of this block name paired with the presumed location of that data on the underlying storage. However, it is not possible to -guarantee that the index is accurate. Most often, this occurs because it is -too costly to update the index when a block is over-written or discarded. -Doing so would require either storing the block name along with the blocks, -which is difficult to do efficiently in block-based storage, or reading and -rehashing each block before overwriting it. Inaccuracy can also result from -a hash collision where two different blocks have the same name. In -practice, this is extremely unlikely, but because vdo does not use a -cryptographic hash, a malicious workload can be constructed. Because of -these inaccuracies, vdo treats the locations in the index as hints, and -reads each indicated block to verify that it is indeed a duplicate before -sharing the existing block with a new one. +guarantee that the index is accurate. In the most common case, this occurs +because it is too costly to update the index when a block is over-written +or discarded. Doing so would require either storing the block name along +with the blocks, which is difficult to do efficiently in block-based +storage, or reading and rehashing each block before overwriting it. +Inaccuracy can also result from a hash collision where two different blocks +have the same name. In practice, this is extremely unlikely, but because +vdo does not use a cryptographic hash, a malicious workload could be +constructed. Because of these inaccuracies, vdo treats the locations in the +index as hints, and reads each indicated block to verify that it is indeed +a duplicate before sharing the existing block with a new one. Records are collected into groups called chapters. New records are added to the newest chapter, called the open chapter. This chapter is stored in a @@ -95,7 +103,7 @@ When the open chapter fills up, it is closed and a new open chapter is created to collect new records. Closing a chapter converts it to a different format which is optimized for -writing. The records are written to a series of record pages based on the +reading. The records are written to a series of record pages based on the order in which they were received. This means that records with temporal locality should be on a small number of pages, reducing the I/O required to retrieve them. The chapter also compiles an index that indicates which @@ -104,85 +112,110 @@ name can determine exactly which record page may contain that record, without having to load the entire chapter from storage. This index uses only a subset of the block name as its key, so it cannot guarantee that an index entry refers to the desired block name. It can only guarantee that if -there is a record for this name, it will be on the indicated page. The -contents of a closed chapter are never altered in any way; these chapters -are read-only structures. +there is a record for this name, it will be on the indicated page. Closed +chapters are read-only structures and their contents are never altered in +any way. Once enough records have been written to fill up all the available index -space, the oldest chapter gets removed to make space for new chapters. Any +space, the oldest chapter is removed to make space for new chapters. Any time a request finds a matching record in the index, that record is copied -to the open chapter. This ensures that useful block names remain available -in the index, while unreferenced block names are forgotten. +into the open chapter. This ensures that useful block names remain available +in the index, while unreferenced block names are forgotten over time. In order to find records in older chapters, the index also maintains a higher level structure called the volume index, which contains entries -mapping a block name to the chapter containing its newest record. This +mapping each block name to the chapter containing its newest record. This mapping is updated as records for the block name are copied or updated, -ensuring that only the newer record for a given block name is findable. -Older records for a block name can no longer be found even though they have -not been deleted. Like the chapter index, the volume index uses only a -subset of the block name as its key and can not definitively say that a -record exists for a name. It can only say which chapter would contain the -record if a record exists. The volume index is stored entirely in memory -and is saved to storage only when the vdo target is shut down. - -From the viewpoint of a request for a particular block name, first it will -look up the name in the volume index which will indicate either that the -record is new, or which chapter to search. If the latter, the request looks -up its name in the chapter index to determine if the record is new, or -which record page to search. Finally, if not new, the request will look for -its record on the indicated record page. This process may require up to two -page reads per request (one for the chapter index page and one for the -request page). However, recently accessed pages are cached so that these -page reads can be amortized across many block name requests. +ensuring that only the newest record for a given block name can be found. +An older record for a block name will no longer be found even though it has +not been deleted from its chapter. Like the chapter index, the volume index +uses only a subset of the block name as its key and can not definitively +say that a record exists for a name. It can only say which chapter would +contain the record if a record exists. The volume index is stored entirely +in memory and is saved to storage only when the vdo target is shut down. + +From the viewpoint of a request for a particular block name, it will first +look up the name in the volume index. This search will either indicate that +the name is new, or which chapter to search. If it returns a chapter, the +request looks up its name in the chapter index. This will indicate either +that the name is new, or which record page to search. Finally, if it is not +new, the request will look for its name in the indicated record page. +This process may require up to two page reads per request (one for the +chapter index page and one for the request page). However, recently +accessed pages are cached so that these page reads can be amortized across +many block name requests. The volume index and the chapter indexes are implemented using a memory-efficient structure called a delta index. Instead of storing the -entire key (the block name) for each entry, the entries are sorted by name +entire block name (the key) for each entry, the entries are sorted by name and only the difference between adjacent keys (the delta) is stored. -Because we expect the hashes to be evenly distributed, the size of the +Because we expect the hashes to be randomly distributed, the size of the deltas follows an exponential distribution. Because of this distribution, -the deltas are expressed in a Huffman code to take up even less space. The -entire sorted list of keys is called a delta list. This structure allows -the index to use many fewer bytes per entry than a traditional hash table, -but it is slightly more expensive to look up entries, because a request -must read every entry in a delta list to add up the deltas in order to find -the record it needs. The delta index reduces this lookup cost by splitting -its key space into many sub-lists, each starting at a fixed key value, so -that each individual list is short. +the deltas are expressed using a Huffman code to take up even less space. +The entire sorted list of keys is called a delta list. This structure +allows the index to use many fewer bytes per entry than a traditional hash +table, but it is slightly more expensive to look up entries, because a +request must read every entry in a delta list to add up the deltas in order +to find the record it needs. The delta index reduces this lookup cost by +splitting its key space into many sub-lists, each starting at a fixed key +value, so that each individual list is short. The default index size can hold 64 million records, corresponding to about -256GB. This means that the index can identify duplicate data if the +256GB of data. This means that the index can identify duplicate data if the original data was written within the last 256GB of writes. This range is called the deduplication window. If new writes duplicate data that is older than that, the index will not be able to find it because the records of the -older data have been removed. So when writing a 200 GB file to a vdo -target, and then immediately writing it again, the two copies will -deduplicate perfectly. Doing the same with a 500 GB file will result in no -deduplication, because the beginning of the file will no longer be in the -index by the time the second write begins (assuming there is no duplication -within the file itself). - -If you anticipate a data workload that will see useful deduplication beyond -the 256GB threshold, vdo can be configured to use a larger index with a -correspondingly larger deduplication window. (This configuration can only -be set when the target is created, not altered later. It is important to -consider the expected workload for a vdo target before configuring it.) -There are two ways to do this. +older data have been removed. This means that if an application writes a +200 GB file to a vdo target and then immediately writes it again, the two +copies will deduplicate perfectly. Doing the same with a 500 GB file will +result in no deduplication, because the beginning of the file will no +longer be in the index by the time the second write begins (assuming there +is no duplication within the file itself). + +If an application anticipates a data workload that will see useful +deduplication beyond the 256GB threshold, vdo can be configured to use a +larger index with a correspondingly larger deduplication window. (This +configuration can only be set when the target is created, not altered +later. It is important to consider the expected workload for a vdo target +before configuring it.) There are two ways to do this. One way is to increase the memory size of the index, which also increases the amount of backing storage required. Doubling the size of the index will double the length of the deduplication window at the expense of doubling the storage size and the memory requirements. -The other way is to enable sparse indexing. Sparse indexing increases the -deduplication window by a factor of 10, at the expense of also increasing -the storage size by a factor of 10. However with sparse indexing, the -memory requirements do not increase; the trade-off is slightly more -computation per request, and a slight decrease in the amount of -deduplication detected. (For workloads with significant amounts of +The other option is to enable sparse indexing. Sparse indexing increases +the deduplication window by a factor of 10, at the expense of also +increasing the storage size by a factor of 10. However with sparse +indexing, the memory requirements do not increase. The trade-off is +slightly more computation per request and a slight decrease in the amount +of deduplication detected. For most workloads with significant amounts of duplicate data, sparse indexing will detect 97-99% of the deduplication -that a standard, or "dense", index will detect.) +that a standard index will detect. + +The vio and data_vio Structures +------------------------------- + +A vio (short for Vdo I/O) is conceptually similar to a bio, with additional +fields and data to track vdo-specific information. A struct vio maintains a +pointer to a bio but also tracks other fields specific to the operation of +vdo. The vio is kept separate from its related bio because there are many +circumstances where vdo completes the bio but must continue to do work +related to deduplication or compression. + +Metadata reads and writes, and other writes that originate within vdo, use +a struct vio directly. Application reads and writes use a larger structure +called a data_vio to track information about their progress. A struct +data_vio contain a struct vio and also includes several other fields +related to deduplication and other vdo features. The data_vio is the +primary unit of application work in vdo. Each data_vio proceeds through a +set of steps to handle the application data, after which it is reset and +returned to a pool of data_vios for reuse. + +There is a fixed pool of 2048 data_vios. This number was chosen to bound +the amount of work that is required to recover from a crash. In addition, +benchmarks have indicated that increasing the size of the pool does not +significantly improve performance. The Data Store -------------- @@ -199,13 +232,18 @@ three sections. Most of a slab consists of a linear sequence of 4K blocks. These blocks are used either to store data, or to hold portions of the block map (see below). In addition to the data blocks, each slab has a set of reference counters, using 1 byte for each data block. Finally each slab -has a journal. Reference updates are written to the slab journal, which is -written out one block at a time as each block fills. A copy of the -reference counters are kept in memory, and are written out a block at a -time, in oldest-dirtied-order whenever there is a need to reclaim slab -journal space. The journal is used both to ensure that the main recovery -journal (see below) can regularly free up space, and also to amortize the -cost of updating individual reference blocks. +has a journal. + +Reference updates are written to the slab journal. Slab journal blocks are +written out either when they are full, or when the recovery journal +requests they do so in order to allow the main recovery journal (see below) +to free up space. The slab journal is used both to ensure that the main +recovery journal can regularly free up space, and also to amortize the cost +of updating individual reference blocks. The reference counters are kept in +memory and are written out, a block at a time in oldest-dirtied-order, only +when there is a need to reclaim slab journal space. The write operations +are performed in the background as needed so they do not add latency to +particular I/O operations. Each slab is independent of every other. They are assigned to "physical zones" in round-robin fashion. If there are P physical zones, then slab n @@ -214,14 +252,14 @@ is assigned to zone n mod P. The slab depot maintains an additional small data structure, the "slab summary," which is used to reduce the amount of work needed to come back online after a crash. The slab summary maintains an entry for each slab -indicating whether or not the slab has ever been used, whether it is clean -(i.e. all of its reference count updates have been persisted to storage), -and approximately how full it is. During recovery, each physical zone will -attempt to recover at least one slab, stopping whenever it has recovered a -slab which has some free blocks. Once each zone has some space (or has -determined that none is available), the target can resume normal operation -in a degraded mode. Read and write requests can be serviced, perhaps with -degraded performance, while the remainder of the dirty slabs are recovered. +indicating whether or not the slab has ever been used, whether all of its +reference count updates have been persisted to storage, and approximately +how full it is. During recovery, each physical zone will attempt to recover +at least one slab, stopping whenever it has recovered a slab which has some +free blocks. Once each zone has some space, or has determined that none is +available, the target can resume normal operation in a degraded mode. Read +and write requests can be serviced, perhaps with degraded performance, +while the remainder of the dirty slabs are recovered. *The Block Map* @@ -233,32 +271,30 @@ of the mapping. Of the 16 possible states, one represents a logical address which is unmapped (i.e. it has never been written, or has been discarded), one represents an uncompressed block, and the other 14 states are used to indicate that the mapped data is compressed, and which of the compression -slots in the compressed block this logical address maps to (see below). +slots in the compressed block contains the data for this logical address. In practice, the array of mapping entries is divided into "block map pages," each of which fits in a single 4K block. Each block map page -consists of a header, and 812 mapping entries (812 being the number that -fit). Each mapping page is actually a leaf of a radix tree which consists -of block map pages at each level. There are 60 radix trees which are -assigned to "logical zones" in round robin fashion (if there are L logical -zones, tree n will belong to zone n mod L). At each level, the trees are -interleaved, so logical addresses 0-811 belong to tree 0, logical addresses -812-1623 belong to tree 1, and so on. The interleaving is maintained all -the way up the forest. 60 was chosen as the number of trees because it is -highly composite and hence results in an evenly distributed number of trees -per zone for a large number of possible logical zone counts. The storage -for the 60 tree roots is allocated at format time. All other block map -pages are allocated out of the slabs as needed. This flexible allocation -avoids the need to pre-allocate space for the entire set of logical -mappings and also makes growing the logical size of a vdo easy to -implement. +consists of a header and 812 mapping entries. Each mapping page is actually +a leaf of a radix tree which consists of block map pages at each level. +There are 60 radix trees which are assigned to "logical zones" in round +robin fashion. (If there are L logical zones, tree n will belong to zone n +mod L.) At each level, the trees are interleaved, so logical addresses +0-811 belong to tree 0, logical addresses 812-1623 belong to tree 1, and so +on. The interleaving is maintained all the way up to the 60 root nodes. +Choosing 60 trees results in an evenly distributed number of trees per zone +for a large number of possible logical zone counts. The storage for the 60 +tree roots is allocated at format time. All other block map pages are +allocated out of the slabs as needed. This flexible allocation avoids the +need to pre-allocate space for the entire set of logical mappings and also +makes growing the logical size of a vdo relatively easy. In operation, the block map maintains two caches. It is prohibitive to keep the entire leaf level of the trees in memory, so each logical zone maintains its own cache of leaf pages. The size of this cache is configurable at target start time. The second cache is allocated at start time, and is large enough to hold all the non-leaf pages of the entire -block map. This cache is populated as needed. +block map. This cache is populated as pages are needed. *The Recovery Journal* @@ -267,127 +303,307 @@ slab depot. Each write request causes an entry to be made in the journal. Entries are either "data remappings" or "block map remappings." For a data remapping, the journal records the logical address affected and its old and new physical mappings. For a block map remapping, the journal records the -block map page number and the physical block allocated for it (block map -pages are never reclaimed, so the old mapping is always 0). Each journal -entry and the data write it represents must be stable on disk before the -other metadata structures may be updated to reflect the operation. +block map page number and the physical block allocated for it. Block map +pages are never reclaimed or repurposed, so the old mapping is always 0. + +Each journal entry is an intent record summarizing the metadata updates +that are required for a data_vio. The recovery journal issues a flush +before each journal block write to ensure that the physical data for the +new block mappings in that block are stable on storage, and journal block +writes are all issued with the FUA bit set to ensure the recovery journal +entries themselves are stable. The journal entry and the data write it +represents must be stable on disk before the other metadata structures may +be updated to reflect the operation. These entries allow the vdo device to +reconstruct the logical to physical mappings after an unexpected +interruption such as a loss of power. *Write Path* -A write bio is first assigned a "data_vio," the request object which will -operate on behalf of the bio. (A "vio," from Vdo I/O, is vdo's wrapper for -bios; metadata operations use a vio, whereas submitted bios require the -much larger data_vio.) There is a fixed pool of 2048 data_vios. This number -was chosen both to bound the amount of work that is required to recover -from a crash, and because measurements indicate that increasing it consumes -more resources, but does not improve performance. These measurements have -been, and should continue to be, revisited over time. - -Once a data_vio is assigned, the following steps are performed: - -1. The bio's data is checked to see if it is all zeros, and copied if not. - -2. A lock is obtained on the logical address of the bio. Because - deduplication involves sharing blocks, it is vital to prevent - simultaneous modifications of the same block. - -3. The block map tree is traversed, loading any non-leaf pages which cover - the logical address and are not already in memory. If any of these - pages, or the leaf page which covers the logical address have not been - allocated, and the block is not all zeros, they are allocated at this - time. +All write I/O to vdo is asynchronous. Each bio will be acknowledged as soon +as vdo has done enough work to guarantee that it can complete the write +eventually. Generally, the data for acknowledged but unflushed write I/O +can be treated as though it is cached in memory. If an application +requires data to be stable on storage, it must issue a flush or write the +data with the FUA bit set like any other asynchronous I/O. Shutting down +the vdo target will also flush any remaining I/O. + +Application write bios follow the steps outlined below. + +1. A data_vio is obtained from the data_vio pool and associated with the + application bio. If there are no data_vios available, the incoming bio + will block until a data_vio is available. This provides back pressure + to the application. The data_vio pool is protected by a spin lock. + + The newly acquired data_vio is reset and the bio's data is copied into + the data_vio if it is a write and the data is not all zeroes. The data + must be copied because the application bio can be acknowledged before + the data_vio processing is complete, which means later processing steps + will no longer have access to the application bio. The application bio + may also be smaller than 4K, in which case the data_vio will have + already read the underlying block and the data is instead copied over + the relevant portion of the larger block. + +2. The data_vio places a claim (the "logical lock") on the logical address + of the bio. It is vital to prevent simultaneous modifications of the + same logical address, because deduplication involves sharing blocks. + This claim is implemented as an entry in a hashtable where the key is + the logical address and the value is a pointer to the data_vio + currently handling that address. + + If a data_vio looks in the hashtable and finds that another data_vio is + already operating on that logical address, it waits until the previous + operation finishes. It also sends a message to inform the current + lock holder that it is waiting. Most notably, a new data_vio waiting + for a logical lock will flush the previous lock holder out of the + compression packer (step 8d) rather than allowing it to continue + waiting to be packed. + + This stage requires the data_vio to get an implicit lock on the + appropriate logical zone to prevent concurrent modifications of the + hashtable. This implicit locking is handled by the zone divisions + described above. + +3. The data_vio traverses the block map tree to ensure that all the + necessary internal tree nodes have been allocated, by trying to find + the leaf page for its logical address. If any interior tree page is + missing, it is allocated at this time out of the same physical storage + pool used to store application data. + + a. If any page-node in the tree has not yet been allocated, it must be + allocated before the write can continue. This step requires the + data_vio to lock the page-node that needs to be allocated. This + lock, like the logical block lock in step 2, is a hashtable entry + that causes other data_vios to wait for the allocation process to + complete. + + The implicit logical zone lock is released while the allocation is + happening, in order to allow other operations in the same logical + zone to proceed. The details of allocation are the same as in + step 4. Once a new node has been allocated, that node is added to + the tree using a similar process to adding a new data block mapping. + The data_vio journals the intent to add the new node to the block + map tree (step 10), updates the reference count of the new block + (step 11), and reacquires the implicit logical zone lock to add the + new mapping to the parent tree node (step 12). Once the tree is + updated, the data_vio proceeds down the tree. Any other data_vios + waiting on this allocation also proceed. + + b. In the steady-state case, the block map tree nodes will already be + allocated, so the data_vio just traverses the tree until it finds + the required leaf node. The location of the mapping (the "block map + slot") is recorded in the data_vio so that later steps do not need + to traverse the tree again. The data_vio then releases the implicit + logical zone lock. 4. If the block is a zero block, skip to step 9. Otherwise, an attempt is - made to allocate a free data block. - -5. If an allocation was obtained, the bio is acknowledged. - -6. The bio's data is hashed. - -7. The data_vio obtains or joins a "hash lock," which represents all of - the bios currently writing the same data. - -8. If the hash lock does not already have a data_vio acting as its agent, - the current one assumes that role. As the agent: - - a) The index is queried. - - b) If an entry is found, the indicated block is read and compared - to the data being written. - - c) If the data matches, we have identified duplicate data. As many - of the data_vios as there are references available for that - block (including the agent) are shared. If there are more - data_vios in the hash lock than there are references available, - one of them becomes the new agent and continues as if there was - no duplicate found. - - d) If no duplicate was found, and the agent in the hash lock does - not have an allocation (fron step 3), another data_vio in the - hash lock will become the agent and write the data. If no - data_vio in the hash lock has an allocation, the data_vios will - be marked out of space and go to step 13 for cleanup. - - If there is an allocation, the data being written will be - compressed. If the compressed size is sufficiently small, the - data_vio will go to the packer where it may be placed in a bin - along with other data_vios. - - e) Once a bin is full, either because it is out of space, or - because all 14 of its slots are in use, it is written out. - - f) Each data_vio from the bin just written is the agent of some - hash lock, it will now proceed to treat the just written - compressed block as if it were a duplicate and share it with as - many other data_vios in its hash lock as possible. - - g) If the agent's data is not compressed, it will attempt to write - its data to the block it has allocated. - - h) If the data was written, this new block is treated as a - duplicate and shared as much as possible with any other - data_vios in the hash lock. - - i) If the agent wrote new data (whether compressed or not), the - index is updated to reflect the new entry. - -9. The block map is queried to determine the previous mapping of the - logical address. - -10. An entry is made in the recovery journal. The data_vio will block in - the journal until a flush has completed to ensure the data it may have - written is stable. It must also wait until its journal entry is stable - on disk. (Journal writes are all issued with the FUA bit set.) + made to allocate a free data block. This allocation ensures that the + data_vio can write its data somewhere even if deduplication and + compression are not possible. This stage gets an implicit lock on a + physical zone to search for free space within that zone. + + The data_vio will search each slab in a zone until it finds a free + block or decides there are none. If the first zone has no free space, + it will proceed to search the next physical zone by taking the implicit + lock for that zone and releasing the previous one until it finds a + free block or runs out of zones to search. The data_vio will acquire a + struct pbn_lock (the "physical block lock") on the free block. The + struct pbn_lock also has several fields to record the various kinds of + claims that data_vios can have on physical blocks. The pbn_lock is + added to a hashtable like the logical block locks in step 2. This + hashtable is also covered by the implicit physical zone lock. The + reference count of the free block is updated to prevent any other + data_vio from considering it free. The reference counters are a + sub-component of the slab and are thus also covered by the implicit + physical zone lock. + +5. If an allocation was obtained, the data_vio has all the resources it + needs to complete the write. The application bio can safely be + acknowledged at this point. The acknowledgment happens on a separate + thread to prevent the application callback from blocking other data_vio + operations. + + If an allocation could not be obtained, the data_vio continues to + attempt to deduplicate or compress the data, but the bio is not + acknowledged because the vdo device may be out of space. + +6. At this point vdo must determine where to store the application data. + The data_vio's data is hashed and the hash (the "record name") is + recorded in the data_vio. + +7. The data_vio reserves or joins a struct hash_lock, which manages all of + the data_vios currently writing the same data. Active hash locks are + tracked in a hashtable similar to the way logical block locks are + tracked in step 2. This hashtable is covered by the implicit lock on + the hash zone. + + If there is no existing hash lock for this data_vio's record_name, the + data_vio obtains a hash lock from the pool, adds it to the hashtable, + and sets itself as the new hash lock's "agent." The hash_lock pool is + also covered by the implicit hash zone lock. The hash lock agent will + do all the work to decide where the application data will be + written. If a hash lock for the data_vio's record_name already exists, + and the data_vio's data is the same as the agent's data, the new + data_vio will wait for the agent to complete its work and then share + its result. + + In the rare case that a hash lock exists for the data_vio's hash but + the data does not match the hash lock's agent, the data_vio skips to + step 8h and attempts to write its data directly. This can happen if two + different data blocks produce the same hash, for example. + +8. The hash lock agent attempts to deduplicate or compress its data with + the following steps. + + a. The agent initializes and sends its embedded deduplication request + (struct uds_request) to the deduplication index. This does not + require the data_vio to get any locks because the index components + manage their own locking. The data_vio waits until it either gets a + response from the index or times out. + + b. If the deduplication index returns advice, the data_vio attempts to + obtain a physical block lock on the indicated physical address, in + order to read the data and verify that it is the same as the + data_vio's data, and that it can accept more references. If the + physical address is already locked by another data_vio, the data at + that address may soon be overwritten so it is not safe to use the + address for deduplication. + + c. If the data matches and the physical block can add references, the + agent and any other data_vios waiting on it will record this + physical block as their new physical address and proceed to step 9 + to record their new mapping. If there are more data_vios in the hash + lock than there are references available, one of the remaining + data_vios becomes the new agent and continues to step 8d as if no + valid advice was returned. + + d. If no usable duplicate block was found, the agent first checks that + it has an allocated physical block (from step 3) that it can write + to. If the agent does not have an allocation, some other data_vio in + the hash lock that does have an allocation takes over as agent. If + none of the data_vios have an allocated physical block, these writes + are out of space, so they proceed to step 13 for cleanup. + + e. The agent attempts to compress its data. If the data does not + compress, the data_vio will continue to step 8h to write its data + directly. + + If the compressed size is small enough, the agent will release the + implicit hash zone lock and go to the packer (struct packer) where + it will be placed in a bin (struct packer_bin) along with other + data_vios. All compression operations require the implicit lock on + the packer zone. + + The packer can combine up to 14 compressed blocks in a single 4k + data block. Compression is only helpful if vdo can pack at least 2 + data_vios into a single data block. This means that a data_vio may + wait in the packer for an arbitrarily long time for other data_vios + to fill out the compressed block. There is a mechanism for vdo to + evict waiting data_vios when continuing to wait would cause + problems. Circumstances causing an eviction include an application + flush, device shutdown, or a subsequent data_vio trying to overwrite + the same logical block address. A data_vio may also be evicted from + the packer if it cannot be paired with any other compressed block + before more compressible blocks need to use its bin. An evicted + data_vio will proceed to step 8h to write its data directly. + + f. If the agent fills a packer bin, either because all 14 of its slots + are used or because it has no remaining space, it is written out + using the allocated physical block from one of its data_vios. Step + 8d has already ensured that an allocation is available. + + g. Each data_vio sets the compressed block as its new physical address. + The data_vio obtains an implicit lock on the physical zone and + acquires the struct pbn_lock for the compressed block, which is + modified to be a shared lock. Then it releases the implicit physical + zone lock and proceeds to step 8i. + + h. Any data_vio evicted from the packer will have an allocation from + step 3. It will write its data to that allocated physical block. + + i. After the data is written, if the data_vio is the agent of a hash + lock, it will reacquire the implicit hash zone lock and share its + physical address with as many other data_vios in the hash lock as + possible. Each data_vio will then proceed to step 9 to record its + new mapping. + + j. If the agent actually wrote new data (whether compressed or not), + the deduplication index is updated to reflect the location of the + new data. The agent then releases the implicit hash zone lock. + +9. The data_vio determines the previous mapping of the logical address. + There is a cache for block map leaf pages (the "block map cache"), + because there are usually too many block map leaf nodes to store + entirely in memory. If the desired leaf page is not in the cache, the + data_vio will reserve a slot in the cache and load the desired page + into it, possibly evicting an older cached page. The data_vio then + finds the current physical address for this logical address (the "old + physical mapping"), if any, and records it. This step requires a lock + on the block map cache structures, covered by the implicit logical zone + lock. + +10. The data_vio makes an entry in the recovery journal containing the + logical block address, the old physical mapping, and the new physical + mapping. Making this journal entry requires holding the implicit + recovery journal lock. The data_vio will wait in the journal until all + recovery blocks up to the one containing its entry have been written + and flushed to ensure the transaction is stable on storage. 11. Once the recovery journal entry is stable, the data_vio makes two slab journal entries: an increment entry for the new mapping, and a - decrement entry for the old mapping, if that mapping was non-zero. For - correctness during recovery, the slab journal entries in any given slab - journal must be in the same order as the corresponding recovery journal - entries. Therefore, if the two entries are in different zones, they are - made concurrently, and if they are in the same zone, the increment is - always made before the decrement in order to avoid underflow. After - each slab journal entry is made in memory, the associated reference - count is also updated in memory. Each of these updates will get written - out as needed. (Slab journal blocks are written out either when they - are full, or when the recovery journal requests they do so in order to - allow the recovery journal to free up space; reference count blocks are - written out whenever the associated slab journal requests they do so in - order to free up slab journal space.) - -12. Once all the reference count updates are done, the block map is updated - and the write is complete. - -13. If the data_vio did not use its allocation, it releases the allocated - block, the hash lock (if it has one), and its logical lock. The - data_vio then returns to the pool. + decrement entry for the old mapping. These two operations each require + holding a lock on the affected physical slab, covered by its implicit + physical zone lock. For correctness during recovery, the slab journal + entries in any given slab journal must be in the same order as the + corresponding recovery journal entries. Therefore, if the two entries + are in different zones, they are made concurrently, and if they are in + the same zone, the increment is always made before the decrement in + order to avoid underflow. After each slab journal entry is made in + memory, the associated reference count is also updated in memory. + +12. Once both of the reference count updates are done, the data_vio + acquires the implicit logical zone lock and updates the + logical-to-physical mapping in the block map to point to the new + physical block. At this point the write operation is complete. + +13. If the data_vio has a hash lock, it acquires the implicit hash zone + lock and releases its hash lock to the pool. + + The data_vio then acquires the implicit physical zone lock and releases + the struct pbn_lock it holds for its allocated block. If it had an + allocation that it did not use, it also sets the reference count for + that block back to zero to free it for use by subsequent data_vios. + + The data_vio then acquires the implicit logical zone lock and releases + the logical block lock acquired in step 2. + + The application bio is then acknowledged if it has not previously been + acknowledged, and the data_vio is returned to the pool. *Read Path* -Reads are much simpler than writes. After a data_vio is assigned to the -bio, and the logical lock is obtained, the block map is queried. If the -block is mapped, the appropriate physical block is read, and if necessary, -decompressed. +An application read bio follows a much simpler set of steps. It does steps +1 and 2 in the write path to obtain a data_vio and lock its logical +address. If there is already a write data_vio in progress for that logical +address that is guaranteed to complete, the read data_vio will copy the +data from the write data_vio and return it. Otherwise, it will look up the +logical-to-physical mapping by traversing the block map tree as in step 3, +and then read and possibly decompress the indicated data at the indicated +physical block address. A read data_vio will not allocate block map tree +nodes if they are missing. If the interior block map nodes do not exist +yet, the logical block map address must still be unmapped and the read +data_vio will return all zeroes. A read data_vio handles cleanup and +acknowledgment as in step 13, although it only needs to release the logical +lock and return itself to the pool. + +*Small Writes* + +All storage within vdo is managed as 4KB blocks, but it can accept writes +as small as 512 bytes. Processing a write that is smaller than 4K requires +a read-modify-write operation that reads the relevant 4K block, copies the +new data over the approriate sectors of the block, and then launches a +write operation for the modified data block. The read and write stages of +this operation are nearly identical to the normal read and write +operations, and a single data_vio is used throughout this operation. *Recovery* @@ -399,7 +615,7 @@ into the slab journals. Finally, each physical zone attempts to replay at least one slab journal to reconstruct the reference counts of one slab. Once each zone has some free space (or has determined that it has none), the vdo comes back online, while the remainder of the slab journals are -used to reconstruct the rest of the reference counts. +used to reconstruct the rest of the reference counts in the background. *Read-only Rebuild* @@ -407,9 +623,11 @@ If a vdo encounters an unrecoverable error, it will enter read-only mode. This mode indicates that some previously acknowledged data may have been lost. The vdo may be instructed to rebuild as best it can in order to return to a writable state. However, this is never done automatically due -to the likelihood that data has been lost. During a read-only rebuild, the +to the possibility that data has been lost. During a read-only rebuild, the block map is recovered from the recovery journal as before. However, the -reference counts are not rebuilt from the slab journals. Rather, the -reference counts are zeroed, and then the entire block map is traversed, -and the reference counts are updated from it. While this may lose some -data, it ensures that the block map and reference counts are consistent. +reference counts are not rebuilt from the slab journals. Instead, the +reference counts are zeroed, the entire block map is traversed, and the +reference counts are updated from the block mappings. While this may lose +some data, it ensures that the block map and reference counts are +consistent with each other. This allows vdo to resume normal operation and +accept further writes. |