summaryrefslogtreecommitdiff
path: root/Documentation/admin-guide
diff options
context:
space:
mode:
authorPatrick Bellasi <patrick.bellasi@arm.com>2019-08-22 16:28:06 +0300
committerIngo Molnar <mingo@kernel.org>2019-09-03 10:17:37 +0300
commit2480c093130f64ac3a410504fa8b3db1fc4b87ce (patch)
tree1dbeca7920dfcadd75249ab41de421bbb2a3ad85 /Documentation/admin-guide
parenta55c7454a8c887b226a01d7eed088ccb5374d81e (diff)
downloadlinux-2480c093130f64ac3a410504fa8b3db1fc4b87ce.tar.xz
sched/uclamp: Extend CPU's cgroup controller
The cgroup CPU bandwidth controller allows to assign a specified (maximum) bandwidth to the tasks of a group. However this bandwidth is defined and enforced only on a temporal base, without considering the actual frequency a CPU is running on. Thus, the amount of computation completed by a task within an allocated bandwidth can be very different depending on the actual frequency the CPU is running that task. The amount of computation can be affected also by the specific CPU a task is running on, especially when running on asymmetric capacity systems like Arm's big.LITTLE. With the availability of schedutil, the scheduler is now able to drive frequency selections based on actual task utilization. Moreover, the utilization clamping support provides a mechanism to bias the frequency selection operated by schedutil depending on constraints assigned to the tasks currently RUNNABLE on a CPU. Giving the mechanisms described above, it is now possible to extend the cpu controller to specify the minimum (or maximum) utilization which should be considered for tasks RUNNABLE on a cpu. This makes it possible to better defined the actual computational power assigned to task groups, thus improving the cgroup CPU bandwidth controller which is currently based just on time constraints. Extend the CPU controller with a couple of new attributes uclamp.{min,max} which allow to enforce utilization boosting and capping for all the tasks in a group. Specifically: - uclamp.min: defines the minimum utilization which should be considered i.e. the RUNNABLE tasks of this group will run at least at a minimum frequency which corresponds to the uclamp.min utilization - uclamp.max: defines the maximum utilization which should be considered i.e. the RUNNABLE tasks of this group will run up to a maximum frequency which corresponds to the uclamp.max utilization These attributes: a) are available only for non-root nodes, both on default and legacy hierarchies, while system wide clamps are defined by a generic interface which does not depends on cgroups. This system wide interface enforces constraints on tasks in the root node. b) enforce effective constraints at each level of the hierarchy which are a restriction of the group requests considering its parent's effective constraints. Root group effective constraints are defined by the system wide interface. This mechanism allows each (non-root) level of the hierarchy to: - request whatever clamp values it would like to get - effectively get only up to the maximum amount allowed by its parent c) have higher priority than task-specific clamps, defined via sched_setattr(), thus allowing to control and restrict task requests. Add two new attributes to the cpu controller to collect "requested" clamp values. Allow that at each non-root level of the hierarchy. Keep it simple by not caring now about "effective" values computation and propagation along the hierarchy. Update sysctl_sched_uclamp_handler() to use the newly introduced uclamp_mutex so that we serialize system default updates with cgroup relate updates. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutny <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'Documentation/admin-guide')
-rw-r--r--Documentation/admin-guide/cgroup-v2.rst34
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 3b29005aa981..5f1c266131b0 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -951,6 +951,13 @@ controller implements weight and absolute bandwidth limit models for
normal scheduling policy and absolute bandwidth allocation model for
realtime scheduling policy.
+In all the above models, cycles distribution is defined only on a temporal
+base and it does not account for the frequency at which tasks are executed.
+The (optional) utilization clamping support allows to hint the schedutil
+cpufreq governor about the minimum desired frequency which should always be
+provided by a CPU, as well as the maximum desired frequency, which should not
+be exceeded by a CPU.
+
WARNING: cgroup2 doesn't yet support control of realtime processes and
the cpu controller can only be enabled when all RT processes are in
the root cgroup. Be aware that system management software may already
@@ -1016,6 +1023,33 @@ All time durations are in microseconds.
Shows pressure stall information for CPU. See
Documentation/accounting/psi.rst for details.
+ cpu.uclamp.min
+ A read-write single value file which exists on non-root cgroups.
+ The default is "0", i.e. no utilization boosting.
+
+ The requested minimum utilization (protection) as a percentage
+ rational number, e.g. 12.34 for 12.34%.
+
+ This interface allows reading and setting minimum utilization clamp
+ values similar to the sched_setattr(2). This minimum utilization
+ value is used to clamp the task specific minimum utilization clamp.
+
+ The requested minimum utilization (protection) is always capped by
+ the current value for the maximum utilization (limit), i.e.
+ `cpu.uclamp.max`.
+
+ cpu.uclamp.max
+ A read-write single value file which exists on non-root cgroups.
+ The default is "max". i.e. no utilization capping
+
+ The requested maximum utilization (limit) as a percentage rational
+ number, e.g. 98.76 for 98.76%.
+
+ This interface allows reading and setting maximum utilization clamp
+ values similar to the sched_setattr(2). This maximum utilization
+ value is used to clamp the task specific maximum utilization clamp.
+
+
Memory
------