Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

 - Add vfio-ap support to pass-through crypto devices to secure
   execution guests

 - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
   required to handle key generate and key derive (e.g. secure key to
   protected key) correctly

 - Add missing secure/has_secure sysfs files for the case where it is
   not possible to figure where a system has been booted from. Existing
   user space relies on that these files are always present

 - Fix DCSS block device driver list corruption, caused by incorrect
   error handling

 - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
   functions to enforce type checking

 - Cleanups, improvements, and minor fixes to the kernel mapping setup

 - Fix various virtual vs physical address confusions

 - Move pfault code to separate file, since it has nothing to do with
   regular fault handling

 - Move s390 documentation to Documentation/arch/ like it has been done
   for other architectures already

 - Add HAVE_FUNCTION_GRAPH_RETVAL support

 - Factor out the s390_hypfs filesystem and add a new config option for
   it. The filesystem is deprecated and as soon as all users are gone it
   can be removed some time in the not so near future

 - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
   driver

 - Add support for user-defined certificates: receive user-defined
   certificates with a diagnose call and provide them via 'cert_store'
   keyring to user space

 - Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390/pci: use builtin_misc_device macro to simplify the code
  s390/vfio-ap: make sure nib is shared
  KVM: s390: export kvm_s390_pv*_is_protected functions
  s390/uv: export uv_pin_shared for direct usage
  s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
  s390/vfio-ap: handle queue state change in progress on reset
  s390/vfio-ap: use work struct to verify queue reset
  s390/vfio-ap: store entire AP queue status word with the queue object
  s390/vfio-ap: remove upper limit on wait for queue reset to complete
  s390/vfio-ap: allow deconfigured queue to be passed through to a guest
  s390/vfio-ap: wait for response code 05 to clear on queue reset
  s390/vfio-ap: clean up irq resources if possible
  s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
  s390/ipl: refactor deprecated strncpy
  s390/ipl: fix virtual vs physical address confusion
  s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
  s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
  s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
  ...

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/arch/s390/qeth.rst b/Documentation/arch/s390/qeth.rst
new file mode 100644
index 000000000000..f02fdaa68de0
--- /dev/null
+++ b/Documentation/arch/s390/qeth.rst
@@ -0,0 +1,64 @@
+=============================
+IBM s390 QDIO Ethernet Driver
+=============================
+
+OSA and HiperSockets Bridge Port Support
+========================================
+
+Uevents
+-------
+
+To generate the events the device must be assigned a role of either
+a primary or a secondary Bridge Port. For more information, see
+"z/VM Connectivity, SC24-6174".
+
+When run on an OSA or HiperSockets Bridge Capable Port hardware, and the state
+of some configured Bridge Port device on the channel changes, a udev
+event with ACTION=CHANGE is emitted on behalf of the corresponding
+ccwgroup device. The event has the following attributes:
+
+BRIDGEPORT=statechange
+  indicates that the Bridge Port device changed
+  its state.
+
+ROLE={primary|secondary|none}
+  the role assigned to the port.
+
+STATE={active|standby|inactive}
+  the newly assumed state of the port.
+
+When run on HiperSockets Bridge Capable Port hardware with host address
+notifications enabled, a udev event with ACTION=CHANGE is emitted.
+It is emitted on behalf of the corresponding ccwgroup device when a host
+or a VLAN is registered or unregistered on the network served by the device.
+The event has the following attributes:
+
+BRIDGEDHOST={reset|register|deregister|abort}
+  host address
+  notifications are started afresh, a new host or VLAN is registered or
+  deregistered on the Bridge Port HiperSockets channel, or address
+  notifications are aborted.
+
+VLAN=numeric-vlan-id
+  VLAN ID on which the event occurred. Not included
+  if no VLAN is involved in the event.
+
+MAC=xx:xx:xx:xx:xx:xx
+  MAC address of the host that is being registered
+  or deregistered from the HiperSockets channel. Not reported if the
+  event reports the creation or destruction of a VLAN.
+
+NTOK_BUSID=x.y.zzzz
+  device bus ID (CSSID, SSID and device number).
+
+NTOK_IID=xx
+  device IID.
+
+NTOK_CHPID=xx
+  device CHPID.
+
+NTOK_CHID=xxxx
+  device channel ID.
+
+Note that the `NTOK_*` attributes refer to devices other than  the one
+connected to the system on which the OS is running.