diff options
author | Olof Johansson <olof@lixom.net> | 2020-09-26 20:22:03 +0300 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2020-09-26 20:22:14 +0300 |
commit | 873c331927302ab484c859601982a7cb88bc0723 (patch) | |
tree | 5c57fbfe984c278bba585adaa82ece58a6a36e89 /Documentation/devicetree/bindings/arm | |
parent | a1c259cdb02885f87c2f04a0127a01548330a42e (diff) | |
parent | 71593c519f162b5f54bafed085cdddc7a883894d (diff) | |
download | linux-873c331927302ab484c859601982a7cb88bc0723.tar.xz |
Merge tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.10, round 1
Highlights:
----------
MCU part:
-Some changes on stm32h743: enable display controler, add SPI resets,
use "st,stm32h7-uart" compatible.
MPU part:
-Add new Odyssey SOM board based on STM32MP157CAC. It embeds 4GB eMMC, 512
MB DDR3 RAM, USB and ETH connectors and a combo wifi/BT (AP6236 chip).
-Add FMC2 EBI support on EV1 board.
-Add arm-pmu node.
-LXA:
-Change ethernet phy delays to avoid kernel warnings.
-Enable DDR50 eMMC mode.
-DH:
-Add new DH DRC02 unit board.
-Add USB OTG support on PDK2 board.
-Use uart8 RTS/CTS on PDK2 board.
-Fix display PWM channel on PDK2 board.
-Swap phy reset line and touchscreen irq on DHCOM SOM.
-Drop QSPI CS2 on DHCOM SOM.
-Update SDMMC pin config on AV96.
-Enable uart7 RTS/CTS on AV96.
* tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add arm-pmu node on stm32mp15
ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
ARM: dts: stm32: lxa-mc1: enable DDR50 mode on eMMC
ARM: dts: stm32: Fix DH PDK2 display PWM channel
ARM: dts: stm32: Enable RTS/CTS for DH AV96 UART7
ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
ARM: dts: stm32: use stm32h7 usart compatible string for stm32h743
ARM: dts: stm32: add resets property to spi device nodes on stm32h743
ARM: dts: stm32: add display controller node to stm32h743
ARM: dts: stm32: Enable RTS/CTS for DH PDK2 UART8
ARM: dts: stm32: Drop QSPI CS2 pinmux on DHCOM
ARM: dts: stm32: Add STM32MP1 UART8 RTS/CTS pinmux
ARM: dts: stm32: add initial support for stm32mp157-odyssey board
dt-bindings: arm: stm32: document Odyssey compatible
dt-bindings: vendor-prefixes: add Seeed Studio
ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
ARM: dts: stm32: Add USB OTG support to DH PDK2
ARM: dts: stm32: Fix sdmmc2 pins on AV96
ARM: dts: stm32: Add DHSOM based DRC02 board
ARM: dts: stm32: Move ethernet PHY into DH SoM DT
Link: https://lore.kernel.org/r/7e2a93c9-cf37-bc93-ed6e-d9cb1808b7a3@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
-rw-r--r-- | Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 790e6dd48e34..3b318fe15194 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -50,4 +50,10 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: Odyssey STM32MP1 SoM based Boards + items: + - enum: + - seeed,stm32mp157c-odyssey + - const: seeed,stm32mp157c-odyssey-som + - const: st,stm32mp157 ... |