summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/ata
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 01:11:41 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 01:11:41 +0300
commit1bc03573e1c9024d4e4be97df4a1e0931edbae2c (patch)
treee15933000f9d671114eb739a25f27cb168b0f948 /Documentation/devicetree/bindings/ata
parent1be2172e96e33bfa22a5c7a651f768ef30ce3984 (diff)
parent5bca462d2d18b1c9ec86c7985753134f06fa5cd2 (diff)
downloadlinux-1bc03573e1c9024d4e4be97df4a1e0931edbae2c.tar.xz
Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "Nothing too interesting or alarming. Other than a new power saving mode addition to ahci and crash fix on a tracepoint, all changes are trivial or device-specific" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode. ata: sata_dwc_460ex: Propagate platform device ID to DMA driver ata: fixes kernel crash while tracing ata_eh_link_autopsy event ata: pata_pdc2027x: Fix space before '[' error. libata: fix spelling mistake: 'ambigious' -> 'ambiguous' ata: ceva: Add SMMU support for SATA IP ata: ceva: Correct the suspend and resume logic for SATA ata: ceva: Correct the AXI bus configuration for SATA ports ata: ceva: Add CCI support for SATA if CCI is enabled ata: ceva: Make RxWaterMark value as module parameter ata: ceva: Disable Device Sleep capability ata: ceva: Add gen 3 mode support in driver ata: ceva: Move sata port phy oob settings to device-tree devicetree: bindings: Add sata port phy config parameters in ahci-ceva ata: mark expected switch fall-throughs ata: sata_mv: remove a redundant assignment to pointer ehi ahci: Add support for Cavium's fifth generation SATA controller ata: sata_rcar: Use of_device_get_match_data() helper libata: make ata_port_type const libata: make static arrays const, reduces object code size ...
Diffstat (limited to 'Documentation/devicetree/bindings/ata')
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-ceva.txt39
1 files changed, 39 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
index 7ca8b976c13a..7561cc4de371 100644
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
@@ -5,6 +5,36 @@ Required properties:
- compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding.
+ - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
+ - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+ CINMP : COMINIT Negate Minimum Period.
+ CIBGN : COMINIT Burst Gap Nominal.
+ CIBGMX: COMINIT Burst Gap Maximum.
+ CIBGMN: COMINIT Burst Gap Minimum.
+ - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
+ - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+ CWBGMN: COMWAKE Burst Gap Minimum.
+ CWBGMX: COMWAKE Burst Gap Maximum.
+ CWBGN: COMWAKE Burst Gap Nominal.
+ CWNMP: COMWAKE Negate Minimum Period.
+ - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
+ - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+ BMX: COM Burst Maximum.
+ BNM: COM Burst Nominal.
+ SFD: Signal Failure Detection value.
+ PTST: Partial to Slumber timer value.
+ - ceva,p0-retry-params: Retry interval timing value for port 0.
+ - ceva,p1-retry-params: Retry interval timing value for port 1.
+ The fields for the above parameter must be as shown below:
+ ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+ RIT: Retry Interval Timer.
+ RCT: Rate Change Timer.
Optional properties:
- ceva,broken-gen2: limit to gen1 speed instead of gen2.
@@ -16,5 +46,14 @@ Examples:
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
clocks = <&clkc SATA_CLK_ID>;
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
ceva,broken-gen2;
};