Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 49 deletions

diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
deleted file mode 100644
index 2632d3f13004..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2410 Clock Controller
-
-The S3C2410 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2410,
-s3c2440 and s3c2442 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
-  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
-  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2410.h header and can be used in device
-tree sources.
-
-External clocks:
-
-The xti clock used as input for the plls is generated outside the SoC. It is
-expected that is are defined using standard clock bindings with a
-clock-output-names value of "xti".
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2410-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
-	};