summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/eeprom
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-02-04 21:57:43 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-02-04 21:57:43 +0300
commit4141cf676b9e345d3ddeb1710dd3156a09c50244 (patch)
tree4b2b6249e99efdd47eafa5780f106d593f64708b /Documentation/devicetree/bindings/eeprom
parent3462ac57033e79a87dbae2497773f22b9c536fbc (diff)
parente38c85644e11c6dc5a39305c96b617f63403423d (diff)
downloadlinux-4141cf676b9e345d3ddeb1710dd3156a09c50244.tar.xz
Merge branch 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has the following changes for you: - new flag to mark DMA safe buffers in i2c_msg. Also, some infrastructure around it. And docs. - huge refactoring of the at24 driver led by the new maintainer Bartosz - update I2C bus recovery to send STOP after recovery - conversion from gpio to gpiod for I2C bus recovery - adding a fault-injector to the i2c-gpio driver - lots of small driver improvements, and bigger ones to i2c-sh_mobile" * 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits) i2c: mv64xxx: Add myself as maintainer for this driver i2c: mv64xxx: Fix clock resource by adding an optional bus clock i2c: mv64xxx: Remove useless test before clk_disable_unprepare i2c: mxs: use true and false for boolean values i2c: meson: update doc description to fix build warnings i2c: meson: add configurable divider factors dt-bindings: i2c: update documentation for the Meson-AXG i2c: imx-lpi2c: add runtime pm support i2c: rcar: fix some trivial typos in comments i2c: davinci: fix the cpufreq transition i2c: rk3x: add proper kerneldoc header i2c: rk3x: account for const type of of_device_id.data i2c: acorn: remove outdated path from file header i2c: acorn: add MODULE_LICENSE tag i2c: rcar: implement bus recovery i2c: send STOP after successful bus recovery i2c: ensure SDA is released in recovery if SDA is controllable i2c: add 'set_sda' to bus_recovery_info i2c: add identifier in declarations for i2c_bus_recovery i2c: make kerneldoc about bus recovery more precise ...
Diffstat (limited to 'Documentation/devicetree/bindings/eeprom')
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.txt78
-rw-r--r--Documentation/devicetree/bindings/eeprom/eeprom.txt47
2 files changed, 78 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
new file mode 100644
index 000000000000..1812c848e369
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -0,0 +1,78 @@
+EEPROMs (I2C)
+
+Required properties:
+
+ - compatible: Must be a "<manufacturer>,<model>" pair. The following <model>
+ values are supported (assuming "atmel" as manufacturer):
+
+ "atmel,24c00",
+ "atmel,24c01",
+ "atmel,24cs01",
+ "atmel,24c02",
+ "atmel,24cs02",
+ "atmel,24mac402",
+ "atmel,24mac602",
+ "atmel,spd",
+ "atmel,24c04",
+ "atmel,24cs04",
+ "atmel,24c08",
+ "atmel,24cs08",
+ "atmel,24c16",
+ "atmel,24cs16",
+ "atmel,24c32",
+ "atmel,24cs32",
+ "atmel,24c64",
+ "atmel,24cs64",
+ "atmel,24c128",
+ "atmel,24c256",
+ "atmel,24c512",
+ "atmel,24c1024",
+
+ If <manufacturer> is not "atmel", then a fallback must be used
+ with the same <model> and "atmel" as manufacturer.
+
+ Example:
+ compatible = "microchip,24c128", "atmel,24c128";
+
+ Supported manufacturers are:
+
+ "catalyst",
+ "microchip",
+ "ramtron",
+ "renesas",
+ "nxp",
+ "st",
+
+ Some vendors use different model names for chips which are just
+ variants of the above. Known such exceptions are listed below:
+
+ "renesas,r1ex24002" - the fallback is "atmel,24c02"
+
+ - reg: The I2C address of the EEPROM.
+
+Optional properties:
+
+ - pagesize: The length of the pagesize for writing. Please consult the
+ manual of your device, that value varies a lot. A wrong value
+ may result in data loss! If not specified, a safety value of
+ '1' is used which will be very slow.
+
+ - read-only: This parameterless property disables writes to the eeprom.
+
+ - size: Total eeprom size in bytes.
+
+ - no-read-rollover: This parameterless property indicates that the
+ multi-address eeprom does not automatically roll over
+ reads to the next slave address. Please consult the
+ manual of your device.
+
+ - wp-gpios: GPIO to which the write-protect pin of the chip is connected.
+
+Example:
+
+eeprom@52 {
+ compatible = "atmel,24c32";
+ reg = <0x52>;
+ pagesize = <32>;
+ wp-gpios = <&gpio1 3 0>;
+};
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
deleted file mode 100644
index 27f2bc15298a..000000000000
--- a/Documentation/devicetree/bindings/eeprom/eeprom.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-EEPROMs (I2C)
-
-Required properties:
-
- - compatible : should be "<manufacturer>,<type>", like these:
-
- "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
- "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
- "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
-
- "catalyst,24c32"
-
- "microchip,24c128"
-
- "ramtron,24c64"
-
- "renesas,r1ex24002"
-
- The following manufacturers values have been deprecated:
- "at", "at24"
-
- If there is no specific driver for <manufacturer>, a generic
- device with <type> and manufacturer "atmel" should be used.
- Possible types are:
- "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
- "24c128", "24c256", "24c512", "24c1024", "spd"
-
- - reg : the I2C address of the EEPROM
-
-Optional properties:
-
- - pagesize : the length of the pagesize for writing. Please consult the
- manual of your device, that value varies a lot. A wrong value
- may result in data loss! If not specified, a safety value of
- '1' is used which will be very slow.
-
- - read-only: this parameterless property disables writes to the eeprom
-
- - size: total eeprom size in bytes
-
-Example:
-
-eeprom@52 {
- compatible = "atmel,24c32";
- reg = <0x52>;
- pagesize = <32>;
-};