diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-01-19 04:21:35 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-01-19 04:21:35 +0300 |
commit | 0f289bdd4102fc870c8b97652c57d41952040d70 (patch) | |
tree | abb62778d9e3dd30c1731db5698a06e13c86ea87 /Documentation/devicetree/bindings/input | |
parent | 33a9caa49938eff19a3cc5ffab195649d702540b (diff) | |
parent | 58f65f9db7e0de366a5a115c2e2c0703858bba69 (diff) | |
download | linux-0f289bdd4102fc870c8b97652c57d41952040d70.tar.xz |
Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: atkbd - use ab83 as id when skipping the getid command
Input: driver for Adafruit Seesaw Gamepad
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: da9063_onkey - avoid explicitly setting input's parent
Input: da9063_onkey - avoid using OF-specific APIs
Input: iqs269a - add support for OTP variants
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Input: zforce_ts - accept standard touchscreen properties
dt-bindings: touchscreen: neonode,zforce: Use standard properties
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: input: convert drv266x to json-schema
Input: da9063 - use dev_err_probe()
Input: da9063 - drop redundant prints in probe()
Input: da9063 - simplify obtaining OF match data
Input: as5011 - convert to GPIO descriptor
Input: omap-keypad - drop optional GPIO support
Input: tca6416-keypad - drop unused include
...
Diffstat (limited to 'Documentation/devicetree/bindings/input')
15 files changed, 523 insertions, 178 deletions
diff --git a/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml new file mode 100644 index 000000000000..5e86f6de6978 --- /dev/null +++ b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Adafruit Mini I2C Gamepad with seesaw + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +description: | + Adafruit Mini I2C Gamepad + + +-----------------------------+ + | ___ | + | / \ (X) | + | | S | __ __ (Y) (A) | + | \___/ |ST| |SE| (B) | + | | + +-----------------------------+ + + S -> 10-bit precision bidirectional analog joystick + ST -> Start + SE -> Select + X, A, B, Y -> Digital action buttons + + Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf + Product page: https://www.adafruit.com/product/5743 + Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw + +properties: + compatible: + const: adafruit,seesaw-gamepad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: + The gamepad's IRQ pin triggers a rising edge if interrupts are enabled. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + joystick@50 { + compatible = "adafruit,seesaw-gamepad"; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + reg = <0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index 159cd9d9fe57..cc78c2152921 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -31,7 +31,23 @@ patternProperties: maxItems: 1 interrupts: - maxItems: 1 + oneOf: + - items: + - description: Optional key interrupt or wakeup interrupt + - items: + - description: Key interrupt + - description: Wakeup interrupt + + interrupt-names: + description: + Optional interrupt names, can be used to specify a separate dedicated + wake-up interrupt in addition to the gpio irq + oneOf: + - items: + - enum: [ irq, wakeup ] + - items: + - const: irq + - const: wakeup label: description: Descriptive name of the key. @@ -97,6 +113,20 @@ patternProperties: - required: - gpios + allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + properties: + interrupt-names: + minItems: 2 + required: + - interrupt-names + dependencies: wakeup-event-action: [ wakeup-source ] linux,input-value: [ gpios ] @@ -137,6 +167,15 @@ examples: linux,code = <108>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; + + key-wakeup { + label = "GPIO Key WAKEUP"; + linux,code = <143>; + interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>, + <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; }; ... diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt deleted file mode 100644 index 519510a11af9..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-mouse.txt +++ /dev/null @@ -1,32 +0,0 @@ -Device-Tree bindings for GPIO attached mice - -This simply uses standard GPIO handles to define a simple mouse connected -to 5-7 GPIO lines. - -Required properties: - - compatible: must be "gpio-mouse" - - scan-interval-ms: The scanning interval in milliseconds - - up-gpios: GPIO line phandle to the line indicating "up" - - down-gpios: GPIO line phandle to the line indicating "down" - - left-gpios: GPIO line phandle to the line indicating "left" - - right-gpios: GPIO line phandle to the line indicating "right" - -Optional properties: - - button-left-gpios: GPIO line handle to the left mouse button - - button-middle-gpios: GPIO line handle to the middle mouse button - - button-right-gpios: GPIO line handle to the right mouse button -Example: - -#include <dt-bindings/gpio/gpio.h> - -gpio-mouse { - compatible = "gpio-mouse"; - scan-interval-ms = <50>; - up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.yaml b/Documentation/devicetree/bindings/input/gpio-mouse.yaml new file mode 100644 index 000000000000..3928ec6aff1d --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-mouse.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-mouse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO attached mouse + +description: | + This simply uses standard GPIO handles to define a simple mouse connected + to 5-7 GPIO lines. + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + const: gpio-mouse + + scan-interval-ms: + maxItems: 1 + + up-gpios: + maxItems: 1 + + down-gpios: + maxItems: 1 + + left-gpios: + maxItems: 1 + + right-gpios: + maxItems: 1 + + button-left-gpios: + maxItems: 1 + + button-middle-gpios: + maxItems: 1 + + button-right-gpios: + maxItems: 1 + +required: + - compatible + - scan-interval-ms + - up-gpios + - down-gpios + - left-gpios + - right-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + gpio-mouse { + compatible = "gpio-mouse"; + scan-interval-ms = <50>; + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml index 3c430d38594f..2c3f693b8982 100644 --- a/Documentation/devicetree/bindings/input/iqs269a.yaml +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml @@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller maintainers: - Jeff LaBundy <jeff@labundy.com> +allOf: + - $ref: input.yaml# + description: | The Azoteq IQS269A is an 8-channel capacitive touch controller that features additional Hall-effect and inductive sensing capabilities. @@ -17,7 +20,10 @@ description: | properties: compatible: - const: azoteq,iqs269a + enum: + - azoteq,iqs269a + - azoteq,iqs269a-00 + - azoteq,iqs269a-d0 reg: maxItems: 1 @@ -204,6 +210,73 @@ properties: default: 1 description: Specifies the slider coordinate filter strength. + azoteq,touch-hold-ms: + multipleOf: 256 + minimum: 256 + maximum: 65280 + default: 5120 + description: + Specifies the length of time (in ms) for which the channel selected by + 'azoteq,gpio3-select' must be held in a state of touch in order for an + approximately 60-ms pulse to be asserted on the GPIO4 pin. + + linux,keycodes: + minItems: 1 + maxItems: 8 + description: | + Specifies the numeric keycodes associated with each available gesture in + the following order (enter 0 for unused gestures): + 0: Slider 0 tap + 1: Slider 0 hold + 2: Slider 0 positive flick or swipe + 3: Slider 0 negative flick or swipe + 4: Slider 1 tap + 5: Slider 1 hold + 6: Slider 1 positive flick or swipe + 7: Slider 1 negative flick or swipe + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger remains + on slider) instead of a flick (finger leaves slider). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 400 + description: + Specifies the length of time (in ms) within which a slider touch must be + released in order to be interpreted as a tap. Default and maximum values + as well as step size are reduced by a factor of 4 with device version 2. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 2000 + description: + Specifies the length of time (in ms) within which an axial gesture must be + completed in order to be interpreted as a flick or swipe. Default and max- + imum values as well as step size are reduced by a factor of 4 with device + version 2. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 128 + description: + Specifies the number of points across which an axial gesture must travel + in order to be interpreted as a flick or swipe. + +dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + patternProperties: "^channel@[0-7]$": type: object @@ -454,6 +527,21 @@ patternProperties: additionalProperties: false +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs269a-d0 +then: + patternProperties: + "^channel@[0-7]$": + properties: + azoteq,slider1-select: false +else: + properties: + azoteq,touch-hold-ms: false + required: - compatible - reg @@ -484,6 +572,14 @@ examples: azoteq,hall-enable; azoteq,suspend-mode = <2>; + linux,keycodes = <KEY_PLAYPAUSE>, + <KEY_STOPCD>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>; + + azoteq,timeout-tap-ms = <400>; + azoteq,timeout-swipe-ms = <800>; + channel@0 { reg = <0x0>; diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml index e34c9e78d38d..70567d92c746 100644 --- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -90,26 +90,4 @@ required: unevaluatedProperties: false -examples: - - | - #include <dt-bindings/input/input.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - - pmic { - compatible = "mediatek,mt6397"; - - keys { - compatible = "mediatek,mt6397-keys"; - mediatek,long-press-mode = <1>; - power-off-time-sec = <0>; - - key-power { - linux,keycodes = <KEY_POWER>; - wakeup-source; - }; - - key-home { - linux,keycodes = <KEY_VOLUMEDOWN>; - }; - }; - }; +... diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml index 5b5d4f7d3482..7ade03f1b32b 100644 --- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml +++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml @@ -45,13 +45,13 @@ properties: Enables the Linux input system's autorepeat feature on the input device. linux,keycodes: - minItems: 6 - maxItems: 6 + minItems: 3 + maxItems: 8 description: | Specifies an array of numeric keycode values to be used for the channels. If this property is omitted, KEY_A, KEY_B, etc are used as defaults. - The array must have exactly six entries. + The number of entries must correspond to the number of channels. microchip,sensor-gain: $ref: /schemas/types.yaml#/definitions/uint32 @@ -70,6 +70,59 @@ properties: open drain. This property allows using the active high push-pull output. + microchip,sensitivity-delta-sense: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + description: + Controls the sensitivity multiplier of a touch detection. + Higher value means more sensitive settings. + At the more sensitive settings, touches are detected for a smaller delta + capacitance corresponding to a "lighter" touch. + + microchip,signal-guard: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [0, 1] + description: | + 0 - off + 1 - on + The signal guard isolates the signal from virtual grounds. + If enabled then the behavior of the channel is changed to signal guard. + The number of entries must correspond to the number of channels. + + microchip,input-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + minimum: 0 + maximum: 127 + description: + Specifies the delta threshold that is used to determine if a touch has + been detected. A higher value means a larger difference in capacitance + is required for a touch to be registered, making the touch sensor less + sensitive. + The number of entries must correspond to the number of channels. + + microchip,calib-sensitivity: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [1, 2, 4] + description: | + Specifies an array of numeric values that controls the gain + used by the calibration routine to enable sensor inputs + to be more sensitive for proximity detection. + Gain is based on touch pad capacitance range + 1 - 5-50pF + 2 - 0-25pF + 4 - 0-12.5pF + The number of entries must correspond to the number of channels. + patternProperties: "^led@[0-7]$": type: object @@ -99,10 +152,29 @@ allOf: contains: enum: - microchip,cap1106 + - microchip,cap1203 + - microchip,cap1206 + - microchip,cap1293 + - microchip,cap1298 then: patternProperties: "^led@[0-7]$": false + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1106 + - microchip,cap1126 + - microchip,cap1188 + - microchip,cap1203 + - microchip,cap1206 + then: + properties: + microchip,signal-guard: false + microchip,calib-sensitivity: false + required: - compatible - interrupts @@ -122,6 +194,8 @@ examples: reg = <0x28>; autorepeat; microchip,sensor-gain = <2>; + microchip,sensitivity-delta-sense = <16>; + microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>; linux,keycodes = <103>, /* KEY_UP */ <106>, /* KEY_RIGHT */ diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml index a401a0bfcbec..4c8d303ff93c 100644 --- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml @@ -28,21 +28,4 @@ required: additionalProperties: false -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0 0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - vibrator@eb4 { - compatible = "sprd,sc2731-vibrator"; - reg = <0xeb4>; - }; - }; +... diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt deleted file mode 100644 index 1ba97ac04305..000000000000 --- a/Documentation/devicetree/bindings/input/ti,drv2665.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Texas Instruments - drv2665 Haptics driver - -Required properties: - - compatible - "ti,drv2665" - DRV2665 - - reg - I2C slave address - - vbat-supply - Required supply regulator - -Example: - -haptics: haptics@59 { - compatible = "ti,drv2665"; - reg = <0x59>; - vbat-supply = <&vbat>; -}; - -For more product information please see the link below: -http://www.ti.com/product/drv2665 diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt deleted file mode 100644 index 996382cf994a..000000000000 --- a/Documentation/devicetree/bindings/input/ti,drv2667.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Texas Instruments - drv2667 Haptics driver - -Required properties: - - compatible - "ti,drv2667" - DRV2667 - - reg - I2C slave address - - vbat-supply - Required supply regulator - -Example: - -haptics: haptics@59 { - compatible = "ti,drv2667"; - reg = <0x59>; - vbat-supply = <&vbat>; -}; - -For more product information please see the link below: -http://www.ti.com/product/drv2667 diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml new file mode 100644 index 000000000000..da1818824373 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,drv266x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - drv266x Haptics driver + +description: | + Product Page: + http://www.ti.com/product/drv2665 + http://www.ti.com/product/drv2667 + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - ti,drv2665 + - ti,drv2667 + + reg: + maxItems: 1 + + vbat-supply: + description: Required supply regulator + +required: + - compatible + - reg + - vbat-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@59 { + compatible = "ti,drv2667"; + reg = <0x59>; + vbat-supply = <&vbat>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml new file mode 100644 index 000000000000..c2ee89b76ea1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Neonode infrared touchscreen controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: neonode,zforce + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + irq-gpios: + maxItems: 1 + + x-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: true + +required: + - compatible + - reg + - interrupts + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@50 { + compatible = "neonode,zforce"; + reg = <0x50>; + interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; + + reset-gpios = <&gpio5 9 0>; /* RST */ + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ + + touchscreen-min-x = <0>; + touchscreen-size-x = <800>; + touchscreen-min-y = <0>; + touchscreen-size-y = <600>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt deleted file mode 100644 index 6805d10d226d..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Samsung S6SY761 touchscreen controller - -Required properties: -- compatible : must be "samsung,s6sy761" -- reg : I2C slave address, (e.g. 0x48) -- interrupts : interrupt specification -- avdd-supply : analogic power supply -- vdd-supply : power supply - -Optional properties: -- touchscreen-size-x : see touchscreen.txt. This property is embedded in the - device. If defined it forces a different x resolution. -- touchscreen-size-y : see touchscreen.txt. This property is embedded in the - device. If defined it forces a different y resolution. - -Example: - -i2c@00000000 { - - /* ... */ - - touchscreen@48 { - compatible = "samsung,s6sy761"; - reg = <0x48>; - interrupt-parent = <&gpa1>; - interrupts = <1 IRQ_TYPE_NONE>; - avdd-supply = <&ldo30_reg>; - vdd-supply = <&ldo31_reg>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml new file mode 100644 index 000000000000..1ffd17af3c53 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6SY761 touchscreen controller + +maintainers: + - Andi Shyti <andi.shyti@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: samsung,s6sy761 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + avdd-supply: true + vdd-supply: true + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - vdd-supply + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt deleted file mode 100644 index e3c27c4fd9c8..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Neonode infrared touchscreen controller - -Required properties: -- compatible: must be "neonode,zforce" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- reset-gpios: reset gpio the chip is connected to -- x-size: horizontal resolution of touchscreen -- y-size: vertical resolution of touchscreen - -Optional properties: -- irq-gpios : interrupt gpio the chip is connected to -- vdd-supply: Regulator controlling the controller supply - -Example: - - i2c@00000000 { - /* ... */ - - zforce_ts@50 { - compatible = "neonode,zforce"; - reg = <0x50>; - interrupts = <2 0>; - vdd-supply = <®_zforce_vdd>; - - reset-gpios = <&gpio5 9 0>; /* RST */ - irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ - - x-size = <800>; - y-size = <600>; - }; - - /* ... */ - }; |