Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l core: subdev frame interval now supports which field

 - v4l kapi: moves and renames the init_cfg pad op to init_state as an
   internal op.

 - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

 - new camera driver: STM32 DCMIPP

 - s5p-mfc has gained MFC v12 support

 - new ISP driver added to staging: Starfive

 - new stateful encoder/decoded: Wave5 codec It is found on the J721S2
   SoC, JH7100 SoC, ssd202d SoC. Etc.

 - fwnode gained support for MIPI "DisCo for Imaging"
   (https://www.mipi.org/specifications/mipi-disco-imaging)

 - as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
  media: i2c: thp7312: select CONFIG_FW_LOADER
  media: i2c: mt9m114: use fsleep() in place of udelay()
  media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
  media: i2c: thp7312: Store frame interval in subdev state
  media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
  media: docs: uAPI: Expand error documentation for invalid 'which' value
  media: docs: uAPI: Clarify error documentation for invalid 'which' value
  media: v4l2-subdev: Store frame interval in subdev state
  media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
  media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
  media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
  media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
  media: s5p-mfc: Load firmware for each run in MFCv12.
  media: s5p-mfc: Set context for valid case before calling try_run
  media: s5p-mfc: Add support for DMABUF for encoder
  media: s5p-mfc: Add support for UHD encoding.
  media: s5p-mfc: Add support for rate controls in MFCv12
  media: s5p-mfc: Add YV12 and I420 multiplanar format support
  media: s5p-mfc: Add initial support for MFCv12
  media: s5p-mfc: Rename IS_MFCV10 macro
  ...

1 files changed, 113 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 000000000000..1726ecca4c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+  The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+  phone camera applications and digital camera products. GC2145 incorporates a
+  1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+  processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+  gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+  sensor. It is programmable through an I2C interface. Image data is sent
+  either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: galaxycore,gc2145
+
+  reg:
+    const: 0x3c
+
+  clocks:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Power Supply for I/O circuits (1.7 - 3V).
+
+  avdd-supply:
+    description: Power for analog circuit/sensor array (2.7 - 3V).
+
+  dvdd-supply:
+    description: Power for digital core (1.7 - 1.9V).
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - reset-gpios
+  - iovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipid02_0>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+                };
+            };
+        };
+    };
+
+...