diff options
| author | David S. Miller <davem@davemloft.net> | 2017-06-07 05:20:08 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-06-07 05:20:08 +0300 |
| commit | 216fe8f021e33c36e3b27c49c9f1951f6b037d7f (patch) | |
| tree | a43daec41b4d3955e7a4f8d0ed0654a7c80527ec /Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | |
| parent | 9747e2313838ee8f5d8073fd6aa7289255c3c51b (diff) | |
| parent | b29794ec95c6856b316c2295904208bf11ffddd9 (diff) | |
| download | linux-216fe8f021e33c36e3b27c49c9f1951f6b037d7f.tar.xz | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just some simple overlapping changes in marvell PHY driver
and the DSA core code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 71a3c134af1b..f01d154090da 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -247,7 +247,6 @@ bias-bus-hold - latch weakly bias-pull-up - pull up the pin bias-pull-down - pull down the pin bias-pull-pin-default - use pin-default pull state -bi-directional - pin supports simultaneous input/output operations drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source @@ -260,7 +259,6 @@ input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode -output-enable - enable output on pin regardless of output value output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate |