summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pinctrl
diff options
context:
space:
mode:
authorGeert Uytterhoeven <geert+renesas@glider.be>2020-06-26 17:36:38 +0300
committerGeert Uytterhoeven <geert+renesas@glider.be>2020-07-16 10:57:50 +0300
commit4d0e62679f17b8bde01aa9995233b5b9ca05ab7f (patch)
treed706a2ca45094c1d0c377becf4d0501222a21d87 /Documentation/devicetree/bindings/pinctrl
parent6d31fa6aea09b3714c7a0a27d8cad3639c5f54ff (diff)
downloadlinux-4d0e62679f17b8bde01aa9995233b5b9ca05ab7f.tar.xz
dt-bindings: pinctrl: renesas,rza2-pinctrl: Convert to json-schema
Convert the Renesas RZ/A2 combined Pin and GPIO controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200626143638.16512-1-geert+renesas@glider.be
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt87
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml100
2 files changed, 100 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
deleted file mode 100644
index a63ccd476cda..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Renesas RZ/A2 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis.
-Each port features up to 8 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
- - compatible: shall be:
- - "renesas,r7s9210-pinctrl": for RZ/A2M
- - reg
- Address base and length of the memory area where the pin controller
- hardware is mapped to.
- - gpio-controller
- This pin controller also controls pins as GPIO
- - #gpio-cells
- Must be 2
- - gpio-ranges
- Expresses the total number of GPIO ports/pins in this SoC
-
-Example: Pin controller node for RZ/A2M SoC (r7s9210)
-
- pinctrl: pin-controller@fcffe000 {
- compatible = "renesas,r7s9210-pinctrl";
- reg = <0xfcffe000 0x1000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl 0 0 176>;
- };
-
-Sub-nodes
----------
-
-The child nodes of the pin controller designate pins to be used for
-specific peripheral functions or as GPIO.
-
-- Pin multiplexing sub-nodes:
- A pin multiplexing sub-node describes how to configure a set of
- (or a single) pin in some desired alternate function mode.
- The values for the pinmux properties are a combination of port name, pin
- number and the desired function index. Use the RZA2_PINMUX macro located
- in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these.
- For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h
- to express the desired port pin.
-
- Required properties:
- - pinmux:
- integer array representing pin number and pin multiplexing configuration.
- When a pin has to be configured in alternate function mode, use this
- property to identify the pin by its global index, and provide its
- alternate function configuration number along with it.
- When multiple pins are required to be configured as part of the same
- alternate function they shall be specified as members of the same
- argument list of a single "pinmux" property.
- Helper macros to ease assembling the pin index from its position
- (port where it sits on and pin number) and alternate function identifier
- are provided by the pin controller header file at:
- <dt-bindings/pinctrl/r7s9210-pinctrl.h>
- Integers values in "pinmux" argument list are assembled as:
- ((PORT * 8 + PIN) | MUX_FUNC << 16)
-
- Example: Board specific pins configuration
-
- &pinctrl {
- /* Serial Console */
- scif4_pins: serial4 {
- pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
- <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
- };
- };
-
- Example: Assigning a GPIO:
-
- leds {
- status = "okay";
- compatible = "gpio-leds";
-
- led0 {
- /* P6_0 */
- gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
new file mode 100644
index 000000000000..b7911a994f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A2 combined Pin and GPIO controller
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
+ controller.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+ Each port features up to 8 pins, each of them configurable for GPIO function
+ (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ const: "renesas,r7s9210-pinctrl" # RZ/A2M
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZA2_PIN() helper macro in r7s9210-pinctrl.h.
+ E.g. "RZA2_PIN(PORT6, 0)" for P6_0.
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+ description:
+ The child nodes of the pin controller designate pins to be used for
+ specific peripheral functions or as GPIO.
+
+ A pin multiplexing sub-node describes how to configure a set of
+ (or a single) pin in some desired alternate function mode.
+ The values for the pinmux properties are a combination of port name,
+ pin number and the desired function index. Use the RZA2_PINMUX macro
+ located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+ define these.
+ For assigning GPIO pins, use the macro RZA2_PIN also in
+ to express the desired port pin.
+
+ properties:
+ phandle: true
+
+ pinmux:
+ description:
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZA2_PINMUX()
+ helper macro in r7s9210-pinctrl.h.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+ pinctrl: pin-controller@fcffe000 {
+ compatible = "renesas,r7s9210-pinctrl";
+ reg = <0xfcffe000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 176>;
+
+ /* Serial Console */
+ scif4_pins: serial4 {
+ pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+ };
+ };