diff options
author | Geert Uytterhoeven <geert+renesas@glider.be> | 2020-08-21 14:19:56 +0300 |
---|---|---|
committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2020-09-15 10:37:20 +0300 |
commit | 5398b2fa464722a3bb3cf4c264a19ac765974d98 (patch) | |
tree | 86f2cd1c88353600db173cd5a0feb0070f70e987 /Documentation/devicetree/bindings/pinctrl | |
parent | d4691b7f6231a022f20028ea27b6c49466b2acd6 (diff) | |
download | linux-5398b2fa464722a3bb3cf4c264a19ac765974d98.tar.xz |
dt-bindings: pinctrl: rza1: Convert to json-schema
Convert the Renesas RZ/A1 combined Pin and GPIO controller Device Tree
binding documentation to json-schema.
Rename "rza1-pinctrl" to "rza1-ports", to match the compatible value
scheme.
Use "pinctrl" generic node name.
Drop generic and consumer examples, as they do not belong here.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200821111956.4989-1-geert+renesas@glider.be
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt | 222 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml | 190 |
2 files changed, 190 insertions, 222 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt deleted file mode 100644 index 38cdd23d3498..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ /dev/null @@ -1,222 +0,0 @@ -Renesas RZ/A1 combined Pin and GPIO controller - -The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller, -named "Ports" in the hardware reference manual. -Pin multiplexing and GPIO configuration is performed on a per-pin basis -writing configuration values to per-port register sets. -Each "port" features up to 16 pins, each of them configurable for GPIO -function (port mode) or in alternate function mode. -Up to 8 different alternate function modes exist for each single pin. - -Pin controller node -------------------- - -Required properties: - - compatible: should be: - - "renesas,r7s72100-ports": for RZ/A1H - - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M - - "renesas,r7s72102-ports": for RZ/A1L - - - reg - address base and length of the memory area where the pin controller - hardware is mapped to. - -Example: -Pin controller node for RZ/A1H SoC (r7s72100) - -pinctrl: pin-controller@fcfe3000 { - compatible = "renesas,r7s72100-ports"; - - reg = <0xfcfe3000 0x4230>; -}; - -Sub-nodes ---------- - -The child nodes of the pin controller node describe a pin multiplexing -function or a GPIO controller alternatively. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - A single sub-node may define several pin configurations. - A few alternate function require special pin configuration flags to be - supplied along with the alternate function configuration number. - The hardware reference manual specifies when a pin function requires - "software IO driven" mode to be specified. To do so use the generic - properties from the <include/linux/pinctrl/pinconf_generic.h> header file - to instruct the pin controller to perform the desired pin configuration - operation. - Please refer to pinctrl-bindings.txt to get to know more on generic - pin properties usage. - - The allowed generic formats for a pin multiplexing sub-node are the - following ones: - - node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - node-2 { - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - sub-node-2 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - Use the second format when pins part of the same logical group need to have - different generic pin configuration flags applied. - - Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle - of the most external one. - - Eg. - - client-1 { - ... - pinctrl-0 = <&node-1>; - ... - }; - - client-2 { - ... - pinctrl-0 = <&node-2>; - ... - }; - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Helper macros to ease assembling the pin index from its position - (port where it sits on and pin number) and alternate function identifier - are provided by the pin controller header file at: - <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> - Integers values in "pinmux" argument list are assembled as: - ((PORT * 16 + PIN) | MUX_FUNC << 16) - - Optional generic properties: - - input-enable: - enable input bufer for pins requiring software driven IO input - operations. - - output-enable: - enable output buffer for pins requiring software driven IO output - operations. - - The hardware reference manual specifies when a pin has to be configured to - work in bi-directional mode and when the IO direction has to be specified - by software. Bi-directional pins are managed by the pin controller driver - internally, while software driven IO direction has to be explicitly - selected when multiple options are available. - - Example: - A serial communication interface with a TX output pin and an RX input pin. - - &pinctrl { - scif2_pins: serial2 { - pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; - }; - }; - - Pin #0 on port #3 is configured as alternate function #6. - Pin #2 on port #3 is configured as alternate function #4. - - Example 2: - I2c master: both SDA and SCL pins need bi-directional operations - - &pinctrl { - i2c2_pins: i2c2 { - pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; - }; - }; - - Pin #4 on port #1 is configured as alternate function #1. - Pin #5 on port #1 is configured as alternate function #1. - Both need to work in bi-directional mode, the driver manages this internally. - - Example 3: - Multi-function timer input and output compare pins. - Configure TIOC0A as software driven input and TIOC0B as software driven - output. - - &pinctrl { - tioc0_pins: tioc0 { - tioc0_input_pins { - pinumx = <RZA1_PINMUX(4, 0, 2)>; - input-enable; - }; - - tioc0_output_pins { - pinmux = <RZA1_PINMUX(4, 1, 1)>; - output-enable; - }; - }; - }; - - &tioc0 { - ... - pinctrl-0 = <&tioc0_pins>; - ... - }; - - Pin #0 on port #4 is configured as alternate function #2 with IO direction - specified by software as input. - Pin #1 on port #4 is configured as alternate function #1 with IO direction - specified by software as output. - -- GPIO controller sub-nodes: - Each port of the r7s72100 pin controller hardware is itself a GPIO controller. - Different SoCs have different numbers of available pins per port, but - generally speaking, each of them can be configured in GPIO ("port") mode - on this hardware. - Describe GPIO controllers using sub-nodes with the following properties. - - Required properties: - - gpio-controller - empty property as defined by the GPIO bindings documentation. - - #gpio-cells - number of cells required to identify and configure a GPIO. - Shall be 2. - - gpio-ranges - Describes a GPIO controller specifying its specific pin base, the pin - base in the global pin numbering space, and the number of controlled - pins, as defined by the GPIO bindings documentation. Refer to - Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed - description. - - Example: - A GPIO controller node, controlling 16 pins indexed from 0. - The GPIO controller base in the global pin indexing space is pin 48, thus - pins [0 - 15] on this controller map to pins [48 - 63] in the global pin - indexing space. - - port3: gpio-3 { - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - A device node willing to use pins controlled by this GPIO controller, shall - refer to it as follows: - - led1 { - gpios = <&port3 10 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml new file mode 100644 index 000000000000..7f80578dc229 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A1 combined Pin and GPIO controller + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO + controller, named "Ports" in the hardware reference manual. + Pin multiplexing and GPIO configuration is performed on a per-pin basis + writing configuration values to per-port register sets. + Each "port" features up to 16 pins, each of them configurable for GPIO + function (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + oneOf: + - const: renesas,r7s72100-ports # RZ/A1H + - items: + - const: renesas,r7s72101-ports # RZ/A1M + - const: renesas,r7s72100-ports # fallback + - const: renesas,r7s72102-ports # RZ/A1L + + reg: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^gpio-[0-9]*$": + type: object + + description: + Each port of the r7s72100 pin controller hardware is itself a GPIO + controller. + Different SoCs have different numbers of available pins per port, but + generally speaking, each of them can be configured in GPIO ("port") mode + on this hardware. + Describe GPIO controllers using sub-nodes with the following properties. + + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - gpio-ranges + + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + A pin multiplexing sub-node describes how to configure a set of (or a + single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + A few alternate function require special pin configuration flags to be + supplied along with the alternate function configuration number. + The hardware reference manual specifies when a pin function requires + "software IO driven" mode to be specified. To do so use the generic + properties from the <include/linux/pinctrl/pinconf_generic.h> header + file to instruct the pin controller to perform the desired pin + configuration operation. + The hardware reference manual specifies when a pin has to be configured + to work in bi-directional mode and when the IO direction has to be + specified by software. Bi-directional pins must be managed by the pin + controller driver internally, while software driven IO direction has to + be explicitly selected when multiple options are available. + + properties: + pinmux: + description: | + Integer array representing pin number and pin multiplexing + configuration. + When a pin has to be configured in alternate function mode, use + this property to identify the pin by its global index, and provide + its alternate function configuration number along with it. + When multiple pins are required to be configured as part of the + same alternate function they shall be specified as members of the + same argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function + identifier are provided by the pin controller header file at: + <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> + Integers values in "pinmux" argument list are assembled as: + ((PORT * 16 + PIN) | MUX_FUNC << 16) + + phandle: true + input-enable: true + output-enable: true + + required: + - pinmux + + additionalProperties: false + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + pinctrl: pinctrl@fcfe3000 { + compatible = "renesas,r7s72100-ports"; + + reg = <0xfcfe3000 0x4230>; + + /* + * A GPIO controller node, controlling 16 pins indexed from 0. + * The GPIO controller base in the global pin indexing space is pin + * 48, thus pins [0 - 15] on this controller map to pins [48 - 63] + * in the global pin indexing space. + */ + port3: gpio-3 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + /* + * A serial communication interface with a TX output pin and an RX + * input pin. + * Pin #0 on port #3 is configured as alternate function #6. + * Pin #2 on port #3 is configured as alternate function #4. + */ + scif2_pins: serial2 { + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + + /* + * I2c master: both SDA and SCL pins need bi-directional operations + * Pin #4 on port #1 is configured as alternate function #1. + * Pin #5 on port #1 is configured as alternate function #1. + * Both need to work in bi-directional mode, the driver must manage + * this internally. + */ + i2c2_pins: i2c2 { + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + + /* + * Multi-function timer input and output compare pins. + */ + tioc0_pins: tioc0 { + /* + * Configure TIOC0A as software driven input + * Pin #0 on port #4 is configured as alternate function #2 + * with IO direction specified by software as input. + */ + tioc0_input_pins { + pinmux = <RZA1_PINMUX(4, 0, 2)>; + input-enable; + }; + + /* + * Configure TIOC0B as software driven output + * Pin #1 on port #4 is configured as alternate function #1 + * with IO direction specified by software as output. + */ + tioc0_output_pins { + pinmux = <RZA1_PINMUX(4, 1, 1)>; + output-enable; + }; + }; + }; |