diff options
author | Geert Uytterhoeven <geert+renesas@glider.be> | 2020-08-21 14:20:59 +0300 |
---|---|---|
committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2020-09-15 10:37:20 +0300 |
commit | 5f76771a4a4514277f4618ba2fe20cb1d9ed5afd (patch) | |
tree | 8a2840b4bf5668fc223d51973d7c8e710d4f2bca /Documentation/devicetree/bindings/pinctrl | |
parent | 5398b2fa464722a3bb3cf4c264a19ac765974d98 (diff) | |
download | linux-5f76771a4a4514277f4618ba2fe20cb1d9ed5afd.tar.xz |
dt-bindings: pinctrl: rzn1: Convert to json-schema
Convert the Renesas RZ/N1 Pin controller Device Tree binding
documentation to json-schema.
Use "pinctrl" generic node name.
Drop generic and consumer examples, as they do not belong here.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Gareth Williams <gareth.williams.jx@renesas.com>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200821112059.5133-1-geert+renesas@glider.be
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt | 153 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml | 129 |
2 files changed, 129 insertions, 153 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt deleted file mode 100644 index 25e53acd523e..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt +++ /dev/null @@ -1,153 +0,0 @@ -Renesas RZ/N1 SoC Pinctrl node description. - -Pin controller node -------------------- -Required properties: -- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl" - followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible - strings must be one of: - "renesas,r9a06g032-pinctrl" for RZ/N1D - "renesas,r9a06g033-pinctrl" for RZ/N1S -- reg: Address base and length of the memory area where the pin controller - hardware is mapped to. -- clocks: phandle for the clock, see the description of clock-names below. -- clock-names: Contains the name of the clock: - "bus", the bus clock, sometimes described as pclk, for register accesses. - -Example: - pinctrl: pin-controller@40067000 { - compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; - reg = <0x40067000 0x1000>, <0x51000000 0x480>; - clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; - clock-names = "bus"; - }; - -Sub-nodes ---------- - -The child nodes of the pin controller node describe a pin multiplexing -function. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - A single sub-node may define several pin configurations. - Please refer to pinctrl-bindings.txt to get to know more on generic - pin properties usage. - - The allowed generic formats for a pin multiplexing sub-node are the - following ones: - - node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - node-2 { - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - sub-node-2 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - node-3 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - Use the latter two formats when pins part of the same logical group need to - have different generic pin configuration flags applied. Note that the generic - pinconfig in node-3 does not apply to the sub-nodes. - - Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle - of the most external one. - - Eg. - - client-1 { - ... - pinctrl-0 = <&node-1>; - ... - }; - - client-2 { - ... - pinctrl-0 = <&node-2>; - ... - }; - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Integers values in the "pinmux" argument list are assembled as: - (PIN | MUX_FUNC << 8) - where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is - one of the alternate function identifiers defined in: - <include/dt-bindings/pinctrl/rzn1-pinctrl.h> - These identifiers collapse the IO Multiplex Configuration Level 1 and - Level 2 numbers that are detailed in the hardware reference manual into a - single number. The identifiers for Level 2 are simply offset by 10. - Additional identifiers are provided to specify the MDIO source peripheral. - - Optional generic pinconf properties: - - bias-disable - disable any pin bias - - bias-pull-up - pull up the pin with 50 KOhm - - bias-pull-down - pull down the pin with 50 KOhm - - bias-high-impedance - high impedance mode - - drive-strength - sink or source at most 4, 6, 8 or 12 mA - - Example: - A serial communication interface with a TX output pin and an RX input pin. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = < - RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */ - RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */ - >; - }; - }; - - Example 2: - Here we set the pull up on the RXD pin of the UART. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; /* TXD */ - - pins_uart6_rx { - pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */ - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml new file mode 100644 index 000000000000..4a43af0d6e02 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Pin Controller + +maintainers: + - Gareth Williams <gareth.williams.jx@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-pinctrl # RZ/N1D + - renesas,r9a06g033-pinctrl # RZ/N1S + - const: renesas,rzn1-pinctrl # Generic RZ/N1 + + reg: + items: + - description: GPIO Multiplexing Level1 Register Block + - description: GPIO Multiplexing Level2 Register Block + + clocks: + maxItems: 1 + + clock-names: + const: bus + description: + The bus clock, sometimes described as pclk, for register accesses. + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + A pin multiplexing sub-node describes how to configure a set of (or a + single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + + properties: + pinmux: + description: | + Integer array representing pin number and pin multiplexing + configuration. + When a pin has to be configured in alternate function mode, use + this property to identify the pin by its global index, and provide + its alternate function configuration number along with it. + When multiple pins are required to be configured as part of the + same alternate function they shall be specified as members of the + same argument list of a single "pinmux" property. + Integers values in the "pinmux" argument list are assembled as: + (PIN | MUX_FUNC << 8) + where PIN directly corresponds to the pl_gpio pin number and + MUX_FUNC is one of the alternate function identifiers defined in: + <include/dt-bindings/pinctrl/rzn1-pinctrl.h> + These identifiers collapse the IO Multiplex Configuration Level 1 + and Level 2 numbers that are detailed in the hardware reference + manual into a single number. The identifiers for Level 2 are simply + offset by 10. Additional identifiers are provided to specify the + MDIO source peripheral. + + phandle: true + bias-disable: true + bias-pull-up: + description: Pull up the pin with 50 kOhm + bias-pull-down: + description: Pull down the pin with 50 kOhm + bias-high-impedance: true + drive-strength: + enum: [ 4, 6, 8, 12 ] + + required: + - pinmux + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + #include <dt-bindings/pinctrl/rzn1-pinctrl.h> + pinctrl: pinctrl@40067000 { + compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; + reg = <0x40067000 0x1000>, <0x51000000 0x480>; + clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; + clock-names = "bus"; + + /* + * A serial communication interface with a TX output pin and an RX + * input pin. + */ + pins_uart0: pins_uart0 { + pinmux = < + RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */ + RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */ + >; + }; + + /* + * Set the pull-up on the RXD pin of the UART. + */ + pins_uart0_alt: pins_uart0_alt { + pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; + + pins_uart6_rx { + pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; + bias-pull-up; + }; + }; + }; |