summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/reset
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-02-09 01:04:19 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-02-09 01:04:19 +0300
commiteab3540562fb44f830e09492374fcc69a283ce47 (patch)
treec8b4ce22b246e8c284787c7c8487f61585c493f2 /Documentation/devicetree/bindings/reset
parent1afa9c3b7c9bdcb562e2afe9f58cc99d0b071cdc (diff)
parent88b4750151a2739761bb1af7fedeae1ff5d9aed9 (diff)
downloadlinux-eab3540562fb44f830e09492374fcc69a283ce47.tar.xz
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
Diffstat (limited to 'Documentation/devicetree/bindings/reset')
-rw-r--r--Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml37
-rw-r--r--Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml63
-rw-r--r--Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt32
3 files changed, 132 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
new file mode 100644
index 000000000000..411bd76f1b64
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Broadcom
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,bcm7216-pcie-sata-rescal.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM7216 RESCAL reset controller
+
+description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Jim Quinlan <jim2101024@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,bcm7216-pcie-sata-rescal
+
+ reg:
+ maxItems: 1
+
+ "#reset-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#reset-cells"
+
+examples:
+ - |
+ reset-controller@8b2c800 {
+ compatible = "brcm,bcm7216-pcie-sata-rescal";
+ reg = <0x8b2c800 0x10>;
+ #reset-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
new file mode 100644
index 000000000000..246dea8a2ec9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Reset Controller on Intel Gateway SoCs
+
+maintainers:
+ - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+ compatible:
+ enum:
+ - intel,rcu-lgm
+ - intel,rcu-xrx200
+
+ reg:
+ description: Reset controller registers.
+ maxItems: 1
+
+ intel,global-reset:
+ description: Global reset register offset and bit offset.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - maxItems: 2
+
+ "#reset-cells":
+ minimum: 2
+ maximum: 3
+ description: |
+ First cell is reset request register offset.
+ Second cell is bit offset in reset request register.
+ Third cell is bit offset in reset status register.
+ For LGM SoC, reset cell count is 2 as bit offset in
+ reset request and reset status registers is same. Whereas
+ 3 for legacy SoCs as bit offset differs.
+
+required:
+ - compatible
+ - reg
+ - intel,global-reset
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ rcu0: reset-controller@e0000000 {
+ compatible = "intel,rcu-lgm";
+ reg = <0xe0000000 0x20000>;
+ intel,global-reset = <0x10 30>;
+ #reset-cells = <2>;
+ };
+
+ pwm: pwm@e0d00000 {
+ status = "disabled";
+ compatible = "intel,lgm-pwm";
+ reg = <0xe0d00000 0x30>;
+ clocks = <&cgu0 1>;
+ #pwm-cells = <2>;
+ resets = <&rcu0 0x30 21>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
new file mode 100644
index 000000000000..6e802703af60
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
@@ -0,0 +1,32 @@
+Nuvoton NPCM Reset controller
+
+Required properties:
+- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
+- reg : specifies physical base address and size of the register.
+- #reset-cells: must be set to 2
+
+Optional property:
+- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
+ NPCM7xx contain four software reset that represent numbers 1 to 4.
+
+ If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.
+
+Example:
+ rstc: rstc@f0801000 {
+ compatible = "nuvoton,npcm750-reset";
+ reg = <0xf0801000 0x70>;
+ #reset-cells = <2>;
+ nuvoton,sw-reset-number = <2>;
+ };
+
+Specifying reset lines connected to IP NPCM7XX modules
+======================================================
+example:
+
+ spi0: spi@..... {
+ ...
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+ ...
+ };
+
+The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.