Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of serial and tty driver updates for 6.3-rc1.

  Once again, Jiri and Ilpo have done a number of core vt and tty/serial
  layer cleanups that were much needed and appreciated. Other than that,
  it's just a bunch of little tty/serial driver updates:

   - qcom-geni-serial driver updates

   - liteuart driver updates

   - hvcs driver cleanups

   - n_gsm updates and additions for new features

   - more 8250 device support added

   - fpga/dfl update and additions

   - imx serial driver updates

   - fsl_lpuart updates

   - other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
  tty: n_gsm: add keep alive support
  serial: imx: remove a redundant check
  dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
  soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  tty: n_gsm: add TIOCMIWAIT support
  tty: n_gsm: add RING/CD control support
  tty: n_gsm: mark unusable ioctl structure fields accordingly
  serial: imx: get rid of registers shadowing
  serial: imx: refine local variables in rxint()
  serial: imx: stop using USR2 in FIFO reading loop
  serial: imx: remove redundant USR2 read from FIFO reading loop
  serial: imx: do not break from FIFO reading loop prematurely
  serial: imx: do not sysrq broken chars
  serial: imx: work-around for hardware RX flood
  serial: imx: factor-out common code to imx_uart_soft_reset()
  serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  serial: 8250_pci1xxxx: Add driver for quad-uart support
  serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  tty: pcn_uart: fix memory leak with using debugfs_lookup()
  ...

1 files changed, 19 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..a8b323d7bf94 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
-allOf:
-  - $ref: /schemas/serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -46,6 +43,9 @@ properties:
       port does not use this pin.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -53,14 +53,25 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
   - |
     uart0: serial@e0000000 {
-      compatible = "xlnx,xuartps", "cdns,uart-r1p8";
-      clocks = <&clkc 23>, <&clkc 40>;
-      clock-names = "uart_clk", "pclk";
-      reg = <0xE0000000 0x1000>;
-      interrupts = <0 27 4>;
+        compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+        clocks = <&clkc 23>, <&clkc 40>;
+        clock-names = "uart_clk", "pclk";
+        reg = <0xe0000000 0x1000>;
+        interrupts = <0 27 4>;
     };