Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.19

This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.

The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.

It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.

The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.

The SCM driver gains support for MSM8974.

Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.

* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
  soc: qcom: pdr: use static for servreg_* variables
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
  soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
  dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
  spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
  soc: qcom: socinfo: Sort out 8974PRO names
  dt-bindings: soc: qcom,smp2p: convert to dtschema
  dt-bindings: qcom: geni-se: Update UART schema reference
  dt-bindings: qcom: geni-se: Update I2C schema reference
  dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
  bus: add driver for initializing the SSC bus on (some) qcom SoCs
  dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
  dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
  dt-bindings: soc: qcom,smd: convert to dtschema
  firmware: qcom_scm: Add compatible for MSM8976 SoC
  dt-bindings: firmware: qcom-scm: Document msm8976 bindings
  soc: qcom: smem: validate fields of shared structures
  soc: qcom: smem: map only partitions used by local HOST
  ...

Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

14 files changed, 968 insertions, 766 deletions

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 95fcb43675d6..006e9f6f4dc5 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -64,116 +64,23 @@ required:
   - ranges
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-    description: Common properties for GENI Serial Engine based I2C, SPI and
-                 UART controller.
-
-    properties:
-      reg:
-        description: GENI Serial Engine register address and length.
-        maxItems: 1
-
-      clock-names:
-        const: se
-
-      clocks:
-        description: Serial engine core clock needed by the device.
-        maxItems: 1
-
-      interconnects:
-        minItems: 2
-        maxItems: 3
-
-      interconnect-names:
-        minItems: 2
-        items:
-          - const: qup-core
-          - const: qup-config
-          - const: qup-memory
-
-    required:
-      - reg
-      - clock-names
-      - clocks
-
   "spi@[0-9a-f]+$":
     type: object
     description: GENI serial engine based SPI controller. SPI in master mode
                  supports up to 50MHz, up to four chip selects, programmable
                  data path from 4 bits to 32 bits and numerous protocol
                  variants.
-    $ref: /schemas/spi/spi-controller.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-spi
-
-      interrupts:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    required:
-      - compatible
-      - interrupts
-      - "#address-cells"
-      - "#size-cells"
+    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
 
   "i2c@[0-9a-f]+$":
     type: object
     description: GENI serial engine based I2C controller.
-    $ref: /schemas/i2c/i2c-controller.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-i2c
-
-      interrupts:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-      clock-frequency:
-        description: Desired I2C bus clock frequency in Hz.
-        default: 100000
-
-    required:
-      - compatible
-      - interrupts
-      - "#address-cells"
-      - "#size-cells"
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
 
   "serial@[0-9a-f]+$":
     type: object
     description: GENI Serial Engine based UART Controller.
-    $ref: /schemas/serial.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-uart
-          - qcom,geni-debug-uart
-
-      interrupts:
-        minItems: 1
-        items:
-          - description: UART core irq
-          - description: Wakeup irq (RX GPIO)
-
-    required:
-      - compatible
-      - interrupts
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
deleted file mode 100644
index fe1855f09dcc..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-QCOM GSBI (General Serial Bus Interface) Driver
-
-The GSBI controller is modeled as a node with zero or more child nodes, each
-representing a serial sub-node device that is mux'd as part of the GSBI
-configuration settings.  The mode setting will govern the input/output mode of
-the 4 GSBI IOs.
-
-Required properties:
-- compatible:	Should contain "qcom,gsbi-v1.0.0"
-- cell-index:	Should contain the GSBI index
-- reg: Address range for GSBI registers
-- clocks: required clock
-- clock-names: must contain "iface" entry
-- qcom,mode : indicates MUX value for configuration of the serial interface.
-  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
-
-Optional properties:
-- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
-  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
-- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
-  dma.
-
-Required properties if child node exists:
-- #address-cells: Must be 1
-- #size-cells: Must be 1
-- ranges: Must be present
-
-Properties for children:
-
-A GSBI controller node can contain 0 or more child nodes representing serial
-devices.  These serial devices can be a QCOM UART, I2C controller, spi
-controller, or some combination of aforementioned devices.
-
-See the following for child node definitions:
-Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
-
-Example for APQ8064:
-
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-	gsbi4@16300000 {
-		compatible = "qcom,gsbi-v1.0.0";
-		cell-index = <4>;
-		reg = <0x16300000 0x100>;
-		clocks = <&gcc GSBI4_H_CLK>;
-		clock-names = "iface";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qcom,mode = <GSBI_PROT_I2C_UART>;
-		qcom,crci = <GSBI_CRCI_QUP>;
-
-		syscon-tcsr = <&tcsr>;
-
-		/* child nodes go under here */
-
-		i2c_qup4: i2c@16380000 {
-			compatible = "qcom,i2c-qup-v1.1.1";
-			reg = <0x16380000 0x1000>;
-			interrupts = <0 153 0>;
-
-			clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-
-			clock-frequency = <200000>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-		};
-
-		uart4:	serial@16340000 {
-			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-			reg = <0x16340000 0x1000>,
-				<0x16300000 0x1000>;
-			interrupts = <0 152 0x0>;
-			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-		};
-	};
-
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,apq8064-tcsr", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
new file mode 100644
index 000000000000..c33704333e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The GSBI controller is modeled as a node with zero or more child nodes, each
+  representing a serial sub-node device that is mux'd as part of the GSBI
+  configuration settings.  The mode setting will govern the input/output mode
+  of the 4 GSBI IOs.
+
+  A GSBI controller node can contain 0 or more child nodes representing serial
+  devices.  These serial devices can be a QCOM UART, I2C controller, spi
+  controller, or some combination of aforementioned devices.
+
+properties:
+  compatible:
+    const: qcom,gsbi-v1.0.0
+
+  '#address-cells':
+    const: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The GSBI index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iface
+
+  qcom,crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      CRCI MUX value for QUP CRCI ports.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+  qcom,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      MUX value for configuration of the serial interface.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+  '#size-cells':
+    const: 1
+
+  syscon-tcsr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of TCSR syscon node.Required if child uses dma.
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+  - compatible
+  - cell-index
+  - clocks
+  - clock-names
+  - qcom,mode
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,gsbi.h>
+
+    gsbi@12440000 {
+        compatible = "qcom,gsbi-v1.0.0";
+        reg = <0x12440000 0x100>;
+        cell-index = <1>;
+        clocks = <&gcc GSBI1_H_CLK>;
+        clock-names = "iface";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        syscon-tcsr = <&tcsr>;
+        qcom,mode = <GSBI_PROT_I2C_UART>;
+
+        serial@12450000 {
+            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+            reg = <0x12450000 0x100>,
+                  <0x12400000 0x03>;
+            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+        };
+
+        i2c@12460000 {
+            compatible = "qcom,i2c-qup-v1.1.1";
+            reg = <0x12460000 0x1000>;
+            pinctrl-0 = <&i2c1_pins>;
+            pinctrl-1 = <&i2c1_pins_sleep>;
+            pinctrl-names = "default", "sleep";
+            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "disabled"; /* UART chosen */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
new file mode 100644
index 000000000000..f5ecf4a8c377
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+  with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+  resources can be written to the Trigger Command Set (TCS)  registers and
+  using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+  sequence over an internal bus.
+
+  The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+  (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+  active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+  be written to from Linux. The structure of each DRV follows the same template
+  with a few variations that are captured by the properties here.
+
+  A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+  have powered off to facilitate idle power saving. TCS could be classified as::
+    ACTIVE  - Triggered by Linux
+    SLEEP   - Triggered by F/W
+    WAKE    - Triggered by F/W
+    CONTROL - Triggered by F/W
+  See also:: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+  The order in which they are described in the DT, should match the hardware
+  configuration.
+
+  Requests can be made for the state of a resource, when the subsystem is
+  active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+  resource state will be an aggregate of the sleep votes from each of those
+  subsystems. Clients may request a sleep value for their shared resources in
+  addition to the active mode requests.
+
+  Drivers that want to use the RSC to communicate with RPMH must specify their
+  bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+  compatible:
+    const: qcom,rpmh-rsc
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      The interrupt that trips when a message complete/response is received for
+      this DRV from the accelerators.
+      Number of interrupts must match number of DRV blocks.
+
+  label:
+    description:
+      Name for the RSC. The name would be used in trace logs.
+
+  qcom,drv-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The ID of the DRV in the RSC block that will be used by this controller.
+
+  qcom,tcs-config:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      - items:
+          - description: TCS type
+            enum: [ 0, 1, 2, 3 ]
+          - description: Number of TCS
+      - items:
+          - description: TCS type
+            enum: [ 0, 1, 2, 3 ]
+          - description: Number of TCS
+      - items:
+          - description: TCS type
+            enum: [ 0, 1, 2, 3]
+          - description: Numbe r of TCS
+      - items:
+          - description: TCS type
+            enum: [ 0, 1, 2, 3 ]
+          - description: Number of TCS
+    description: |
+      The tuple defining the configuration of TCS. Must have two cells which
+      describe each TCS type.  The order of the TCS must match the hardware
+      configuration.
+      Cell 1 (TCS Type):: TCS types to be specified::
+       - ACTIVE_TCS
+       - SLEEP_TCS
+       - WAKE_TCS
+       - CONTROL_TCS
+      Cell 2 (Number of TCS):: <u32>
+
+  qcom,tcs-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The offset of the TCS blocks.
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: drv-0
+      - const: drv-1
+      - const: drv-2
+      - const: drv-3
+
+  bcm-voter:
+    $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+  '-regulators$':
+    $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+
+required:
+  - compatible
+  - interrupts
+  - qcom,drv-id
+  - qcom,tcs-config
+  - qcom,tcs-offset
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+    // 2, the register offsets for DRV2 start at 0D00, the register
+    // calculations are like this::
+    // DRV0: 0x179C0000
+    // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+    // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+    // TCS-OFFSET: 0xD00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@179c0000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x179c0000 0x10000>,
+              <0x179d0000 0x10000>,
+              <0x179e0000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 1>;
+      };
+
+  - |
+    // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+    // register offsets for DRV0 start at 01C00, the register calculations are
+    // like this::
+    // DRV0: 0xAF20000
+    // TCS-OFFSET: 0x1C00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@af20000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0xaf20000 0x10000>;
+        reg-names = "drv-0";
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+        label = "disp_rsc";
+        qcom,tcs-offset = <0x1c00>;
+        qcom,drv-id = <0>;
+        qcom,tcs-config = <ACTIVE_TCS  0>,
+                          <SLEEP_TCS   1>,
+                          <WAKE_TCS    1>,
+                          <CONTROL_TCS 0>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rsc@18200000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x18200000 0x10000>,
+              <0x18210000 0x10000>,
+              <0x18220000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 0>;
+
+        clock-controller {
+            compatible = "qcom,sm8350-rpmh-clk";
+            #clock-cells = <1>;
+            clock-names = "xo";
+            clocks = <&xo_board>;
+        };
+
+        power-controller {
+            compatible = "qcom,sm8350-rpmhpd";
+            #power-domain-cells = <1>;
+            operating-points-v2 = <&rpmhpd_opp_table>;
+
+            rpmhpd_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                rpmhpd_opp_ret: opp1 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                };
+
+                rpmhpd_opp_min_svs: opp2 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                };
+
+                rpmhpd_opp_low_svs: opp3 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                };
+
+                rpmhpd_opp_svs: opp4 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                };
+
+                rpmhpd_opp_svs_l1: opp5 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                };
+
+                rpmhpd_opp_nom: opp6 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                };
+
+                rpmhpd_opp_nom_l1: opp7 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                };
+
+                rpmhpd_opp_nom_l2: opp8 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                };
+
+                rpmhpd_opp_turbo: opp9 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                };
+
+                rpmhpd_opp_turbo_l1: opp10 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                };
+            };
+        };
+
+        bcm-voter {
+            compatible = "qcom,bcm-voter";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index b32457c2fc0b..c4ca384be196 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -12,7 +12,7 @@ description: |
   to vote for state of the system resources, such as clocks, regulators and bus
   frequencies.
 
-  The SMD information for the RPM edge should be filled out.  See qcom,smd.txt
+  The SMD information for the RPM edge should be filled out.  See qcom,smd.yaml
   for the required edge properties.  All SMD related properties will reside
   within the RPM node itself.
 
@@ -25,7 +25,8 @@ description: |
   rpm_requests.
 
 maintainers:
-  - Kathiravan T <kathirav@codeaurora.org>
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 properties:
   compatible:
@@ -82,7 +83,7 @@ examples:
             qcom,ipc = <&apcs 8 0>;
             qcom,smd-edge = <15>;
 
-                rpm_requests {
+                rpm-requests {
                         compatible = "qcom,rpm-msm8974";
                         qcom,smd-channels = "rpm_requests";
 
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
deleted file mode 100644
index 234ae2256501..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Qualcomm Shared Memory Driver (SMD) binding
-
-This binding describes the Qualcomm Shared Memory Driver, a fifo based
-communication channel for sending data between the various subsystems in
-Qualcomm platforms.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,smd"
-
-= EDGES
-
-Each subnode of the SMD node represents a remote subsystem or a remote
-processor of some sort - or in SMD language an "edge". The name of the edges
-are not important.
-The edge is described by the following properties:
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the IRQ used by the remote processor to
-		    signal this processor about communication related updates
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote processor:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smd-edge:
-	Usage: required
-	Value type: <u32>
-	Definition: the identifier of the remote processor in the smd channel
-		    allocation table
-
-- qcom,remote-pid:
-	Usage: optional
-	Value type: <u32>
-	Definition: the identifier for the remote processor as known by the rest
-		    of the system.
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: name of the edge, used for debugging and identification
-		    purposes. The node name will be used if this is not
-		    present.
-
-= SMD DEVICES
-
-In turn, subnodes of the "edges" represent devices tied to SMD channels on that
-"edge". The names of the devices are not important. The properties of these
-nodes are defined by the individual bindings for the SMD devices - but must
-contain the following property:
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <stringlist>
-	Definition: a list of channels tied to this device, used for matching
-		    the device to channels
-
-= EXAMPLE
-
-The following example represents a smd node, with one edge representing the
-"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
-"rpm_request" channel.
-
-	apcs: syscon@f9011000 {
-		compatible = "syscon";
-		reg = <0xf9011000 0x1000>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
new file mode 100644
index 000000000000..e6f9ffa1c0ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Driver
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Qualcomm Shared Memory Driver is a FIFO based communication channel for
+  sending data between the various subsystems in Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,smd
+
+patternProperties:
+  "^.*-edge|rpm$":
+    type: object
+    description:
+      Each subnode of the SMD node represents a remote subsystem or a remote
+      processor of some sort - or in SMD language an "edge". The name of the
+      edges are not important.
+
+    properties:
+      interrupts:
+        maxItems: 1
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Name of the edge, used for debugging and identification purposes. The
+          node name will be used if this is not present.
+
+      mboxes:
+        maxItems: 1
+        description:
+          Reference to the mailbox representing the outgoing doorbell in APCS for
+          this client.
+
+      qcom,ipc:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle to a syscon node representing the APCS registers
+              - description: u32 representing offset to the register within the syscon
+              - description: u32 representing the ipc bit within the register
+        description:
+          Three entries specifying the outgoing ipc bit used for signaling the
+          remote processor.
+
+      qcom,smd-edge:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The identifier of the remote processor in the smd channel allocation
+          table.
+
+      qcom,remote-pid:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The identifier for the remote processor as known by the rest of the
+          system.
+
+    # Binding for edge subnodes is not complete
+    patternProperties:
+      "^rpm-requests$":
+        type: object
+        description:
+          In turn, subnodes of the "edges" represent devices tied to SMD
+          channels on that "edge". The names of the devices are not
+          important. The properties of these nodes are defined by the
+          individual bindings for the SMD devices.
+
+        properties:
+          qcom,smd-channels:
+            $ref: /schemas/types.yaml#/definitions/string-array
+            minItems: 1
+            maxItems: 32
+            description:
+              A list of channels tied to this device, used for matching the
+              device to channels.
+
+        required:
+          - compatible
+          - qcom,smd-channels
+
+        additionalProperties: true
+
+    required:
+      - interrupts
+      - qcom,smd-edge
+
+    oneOf:
+      - required:
+          - mboxes
+      - required:
+          - qcom,ipc
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # The following example represents a smd node, with one edge representing the
+  # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+  # "rpm_request" channel.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8974";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
deleted file mode 100644
index 49e1d72d3648..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Qualcomm Shared Memory Point 2 Point binding
-
-The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
-a single 32-bit value between two processors.  Each value has a single writer
-(the local side) and a single reader (the remote side).  Values are uniquely
-identified in the system by the directed edge (local processor ID to remote
-processor ID) and a string identifier.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smp2p"
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying the smp2p notification interrupt
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote end of the smp2p edge:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smem:
-	Usage: required
-	Value type: <u32 array>
-	Definition: two identifiers of the inbound and outbound smem items used
-		    for this edge
-
-- qcom,local-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the local endpoint of this edge
-
-- qcom,remote-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the remote endpoint of this edge
-
-= SUBNODES
-Each SMP2P pair contain a set of inbound and outbound entries, these are
-described in subnodes of the smp2p device node. The node names are not
-important.
-
-- qcom,entry-name:
-	Usage: required
-	Value type: <string>
-	Definition: specifies the name of this entry, for inbound entries this
-		    will be used to match against the remotely allocated entry
-		    and for outbound entries this name is used for allocating
-		    entries
-
-- interrupt-controller:
-	Usage: required for incoming entries
-	Value type: <empty>
-	Definition: marks the entry as inbound; the node should be specified
-		    as a two cell interrupt-controller as defined in
-		    "../interrupt-controller/interrupts.txt"
-		    If not specified this node will denote the outgoing entry
-
-- #interrupt-cells:
-	Usage: required for incoming entries
-	Value type: <u32>
-	Definition: must be 2 - denoting the bit in the entry and IRQ flags
-
-- #qcom,smem-state-cells:
-	Usage: required for outgoing entries
-	Value type: <u32>
-	Definition: must be 1 - denoting the bit in the entry
-
-= EXAMPLE
-The following example shows the SMP2P setup with the wireless processor,
-defined from the 8974 apps processor's point-of-view. It encompasses one
-inbound and one outbound entry:
-
-wcnss-smp2p {
-	compatible = "qcom,smp2p";
-	qcom,smem = <431>, <451>;
-
-	interrupts = <0 143 1>;
-
-	qcom,ipc = <&apcs 8 18>;
-
-	qcom,local-pid = <0>;
-	qcom,remote-pid = <4>;
-
-	wcnss_smp2p_out: master-kernel {
-		qcom,entry-name = "master-kernel";
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smp2p_in: slave-kernel {
-		qcom,entry-name = "slave-kernel";
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
new file mode 100644
index 000000000000..795bd8cd4104
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Point 2 Point
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+  of a single 32-bit value between two processors.  Each value has a single
+  writer (the local side) and a single reader (the remote side).  Values are
+  uniquely identified in the system by the directed edge (local processor ID to
+  remote processor ID) and a string identifier.
+
+properties:
+  compatible:
+    const: qcom,smp2p
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote end of the smp2p edge.
+
+  qcom,local-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the local endpoint of this edge.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote endpoint of this edge.
+
+  qcom,smem:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maxItems: 2
+    description:
+      Two identifiers of the inbound and outbound smem items used for this edge.
+
+patternProperties:
+  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+    type: object
+    description:
+      Each SMP2P pair contain a set of inbound and outbound entries, these are
+      described in subnodes of the smp2p device node. The node names are not
+      important.
+
+    properties:
+      interrupt-controller:
+        description:
+          Marks the entry as inbound; the node should be specified as a two
+          cell interrupt-controller.  If not specified this node will denote
+          the outgoing entry.
+
+      '#interrupt-cells':
+        const: 2
+
+      qcom,entry-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          The name of this entry, for inbound entries this will be used to
+          match against the remotely allocated entry and for outbound entries
+          this name is used for allocating entries.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for outgoing entries.
+
+    required:
+      - qcom,entry-name
+
+    oneOf:
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+      - required:
+          - '#qcom,smem-state-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,local-pid
+  - qcom,remote-pid
+  - qcom,smem
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMP2P setup with the wireless processor,
+  # defined from the 8974 apps processor's point-of-view. It encompasses one
+  # inbound and one outbound entry.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smp2p";
+        qcom,smem = <431>, <451>;
+        interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 18>;
+        qcom,local-pid = <0>;
+        qcom,remote-pid = <4>;
+
+        wcnss_smp2p_out: master-kernel {
+            qcom,entry-name = "master-kernel";
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smp2p_in: slave-kernel {
+            qcom,entry-name = "slave-kernel";
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
deleted file mode 100644
index 2993b5a97dd6..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm Shared Memory State Machine
-
-The Shared Memory State Machine facilitates broadcasting of single bit state
-information between the processors in a Qualcomm SoC. Each processor is
-assigned 32 bits of state that can be modified. A processor can through a
-matrix of bitmaps signal subscription of notifications upon changes to a
-certain bit owned by a certain remote processor.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smsm"
-
-- qcom,ipc-N:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the N:th remote processor
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,local-host:
-	Usage: optional
-	Value type: <u32>
-	Definition: identifier of the local processor in the list of hosts, or
-		    in other words specifier of the column in the subscription
-		    matrix representing the local processor
-		    defaults to host 0
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 0
-
-= SUBNODES
-Each processor's state bits are described by a subnode of the smsm device node.
-Nodes can either be flagged as an interrupt-controller to denote a remote
-processor's state bits or the local processors bits.  The node names are not
-important.
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the offset, in words, of the first bit for this
-		    entry
-
-- #qcom,smem-state-cells:
-	Usage: required for local entry
-	Value type: <u32>
-	Definition: must be 1 - denotes bit number
-
-- interrupt-controller:
-	Usage: required for remote entries
-	Value type: <empty>
-	Definition: marks the entry as a interrupt-controller and the state bits
-		    to belong to a remote processor
-
-- #interrupt-cells:
-	Usage: required for remote entries
-	Value type: <u32>
-	Definition: must be 2 - denotes bit number and IRQ flags
-
-- interrupts:
-	Usage: required for remote entries
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying remote IRQ used by the remote processor
-		    to signal changes of its state bits
-
-
-= EXAMPLE
-The following example shows the SMEM setup for controlling properties of the
-wireless processor, defined from the 8974 apps processor's point-of-view. It
-encompasses one outbound entry and the outgoing interrupt for the wireless
-processor.
-
-smsm {
-	compatible = "qcom,smsm";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	qcom,ipc-3 = <&apcs 8 19>;
-
-	apps_smsm: apps@0 {
-		reg = <0>;
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smsm: wcnss@7 {
-		reg = <7>;
-		interrupts = <0 144 1>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
new file mode 100644
index 000000000000..db67cf043256
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory State Machine
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory State Machine facilitates broadcasting of single bit state
+  information between the processors in a Qualcomm SoC. Each processor is
+  assigned 32 bits of state that can be modified. A processor can through a
+  matrix of bitmaps signal subscription of notifications upon changes to a
+  certain bit owned by a certain remote processor.
+
+properties:
+  compatible:
+    const: qcom,smsm
+
+  '#address-cells':
+    const: 1
+
+  qcom,local-host:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Identifier of the local processor in the list of hosts, or in other words
+      specifier of the column in the subscription matrix representing the local
+      processor.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^qcom,ipc-[1-4]$":
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the N:th
+      remote processor.
+
+  "@[0-9a-f]$":
+    type: object
+    description:
+      Each processor's state bits are described by a subnode of the SMSM device
+      node.  Nodes can either be flagged as an interrupt-controller to denote a
+      remote processor's state bits or the local processors bits.  The node
+      names are not important.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      interrupt-controller:
+        description:
+          Marks the entry as a interrupt-controller and the state bits to
+          belong to a remote processor.
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupts:
+        maxItems: 1
+        description:
+          One entry specifying remote IRQ used by the remote processor to
+          signal changes of its state bits.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for local entry. Denotes bit number.
+
+    required:
+      - reg
+
+    oneOf:
+      - required:
+          - '#qcom,smem-state-cells'
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+          - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+
+anyOf:
+  - required:
+      - qcom,ipc-1
+  - required:
+      - qcom,ipc-2
+  - required:
+      - qcom,ipc-3
+  - required:
+      - qcom,ipc-4
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMEM setup for controlling properties of
+  # the wireless processor, defined from the 8974 apps processor's
+  # point-of-view. It encompasses one outbound entry and the outgoing interrupt
+  # for the wireless processor.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smsm";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,ipc-3 = <&apcs 8 19>;
+
+        apps_smsm: apps@0 {
+            reg = <0>;
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smsm: wcnss@7 {
+            reg = <7>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
deleted file mode 100644
index 1382b64e1381..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Qualcomm WCNSS Binding
-
-This binding describes the Qualcomm WCNSS hardware. It consists of control
-block and a BT, WiFi and FM radio block, all using SMD as command channels.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,wcnss",
-
-- qcom,smd-channel:
-	Usage: required
-	Value type: <string>
-	Definition: standard SMD property specifying the SMD channel used for
-		    communication with the WiFi firmware.
-		    Should be "WCNSS_CTRL".
-
-- qcom,mmio:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a node specifying the wcnss "ccu" and "dxe"
-		    register blocks. The node must be compatible with one of
-		    the following:
-		    "qcom,riva",
-		    "qcom,pronto"
-
-- firmware-name:
-	Usage: optional
-	Value type: <string>
-	Definition: specifies the relative firmware image path for the WLAN NV
-		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
-		    not specified.
-
-= SUBNODES
-The subnodes of the wcnss node are optional and describe the individual blocks in
-the WCNSS.
-
-== Bluetooth
-The following properties are defined to the bluetooth node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,wcnss-bt"
-
-- local-bd-address:
-	Usage: optional
-	Value type: <u8 array>
-	Definition: see Documentation/devicetree/bindings/net/bluetooth.txt
-
-== WiFi
-The following properties are defined to the WiFi node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,wcnss-wlan",
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the "rx" and "tx" interrupts
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "rx" and "tx"
-
-- qcom,smem-state:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should reference the tx-enable and tx-rings-empty SMEM states
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "tx-enable" and "tx-rings-empty"
-
-= EXAMPLE
-The following example represents a SMD node, with one edge representing the
-"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
-described; as found on the 8974 platform.
-
-smd {
-	compatible = "qcom,smd";
-
-	pronto-edge {
-		interrupts = <0 142 1>;
-
-		qcom,ipc = <&apcs 8 17>;
-		qcom,smd-edge = <6>;
-
-		wcnss {
-			compatible = "qcom,wcnss";
-			qcom,smd-channels = "WCNSS_CTRL";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcom,mmio = <&pronto>;
-
-			bt {
-				compatible = "qcom,wcnss-bt";
-
-				/* BD address 00:11:22:33:44:55 */
-				local-bd-address = [ 55 44 33 22 11 00 ];
-			};
-
-			wlan {
-				compatible = "qcom,wcnss-wlan";
-
-				interrupts = <0 145 0>, <0 146 0>;
-				interrupt-names = "tx", "rx";
-
-				qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
-				qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-			};
-		};
-	};
-};
-
-soc {
-	pronto: pronto {
-		compatible = "qcom,pronto";
-
-		reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-		reg-names = "ccu", "dxe", "pmu";
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
new file mode 100644
index 000000000000..d891ecfb2691
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM
+  radio block, all using SMD as command channels.
+
+properties:
+  compatible:
+    const: qcom,wcnss
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: "wlan/prima/WCNSS_qcom_wlan_nv.bin"
+    description:
+      Relative firmware image path for the WLAN NV blob.
+
+  qcom,mmio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to a node specifying the wcnss "ccu" and "dxe" register blocks.
+      The node must be compatible with one of the following::
+           - qcom,riva"
+           - qcom,pronto"
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: WCNSS_CTRL
+    description:
+      Standard SMD property specifying the SMD channel used for communication
+      with the WiFi firmware.
+
+  bluetooth:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: qcom,wcnss-bt
+
+      local-bd-address:
+        $ref: /schemas/types.yaml#/definitions/uint8-array
+        maxItems: 6
+        description:
+          See Documentation/devicetree/bindings/net/bluetooth.txt
+
+    required:
+      - compatible
+
+  wifi:
+    additionalProperties: false
+    type: object
+    properties:
+      compatible:
+        const: qcom,wcnss-wlan
+
+      interrupts:
+        maxItems: 2
+
+      interrupt-names:
+        items:
+          - const: tx
+          - const: rx
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 2
+        description:
+          Should reference the tx-enable and tx-rings-empty SMEM states.
+
+      qcom,smem-state-names:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        items:
+          - const: tx-enable
+          - const: tx-rings-empty
+        description:
+          Names of SMEM states.
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - qcom,smem-states
+      - qcom,smem-state-names
+
+required:
+  - compatible
+  - qcom,mmio
+  - qcom,smd-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    smd-edge {
+        interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+        qcom,ipc = <&apcs 8 17>;
+        qcom,smd-edge = <6>;
+        qcom,remote-pid = <4>;
+
+        label = "pronto";
+
+        wcnss {
+            compatible = "qcom,wcnss";
+            qcom,smd-channels = "WCNSS_CTRL";
+
+            qcom,mmio = <&pronto>;
+
+            bluetooth {
+                compatible = "qcom,wcnss-bt";
+                /* BD address 00:11:22:33:44:55 */
+                local-bd-address = [ 55 44 33 22 11 00 ];
+            };
+
+            wifi {
+                compatible = "qcom,wcnss-wlan";
+
+                interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "tx", "rx";
+
+                qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
deleted file mode 100644
index 9b86d1eff219..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-RPMH RSC:
-------------
-
-Resource Power Manager Hardened (RPMH) is the mechanism for communicating with
-the hardened resource accelerators on Qualcomm SoCs. Requests to the resources
-can be written to the Trigger Command Set (TCS)  registers and using a (addr,
-val) pair and triggered. Messages in the TCS are then sent in sequence over an
-internal bus.
-
-The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
-(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
-active/wake resource requests. Multiple such DRVs can exist in a SoC and can
-be written to from Linux. The structure of each DRV follows the same template
-with a few variations that are captured by the properties here.
-
-A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
-have powered off to facilitate idle power saving. TCS could be classified as -
-
-	ACTIVE  /* Triggered by Linux */
-	SLEEP   /* Triggered by F/W */
-	WAKE    /* Triggered by F/W */
-	CONTROL /* Triggered by F/W */
-
-The order in which they are described in the DT, should match the hardware
-configuration.
-
-Requests can be made for the state of a resource, when the subsystem is active
-or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state
-will be an aggregate of the sleep votes from each of those subsystems. Clients
-may request a sleep value for their shared resources in addition to the active
-mode requests.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,rpmh-rsc".
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The first register specifies the base address of the
-		    DRV(s). The number of DRVs in the dependent on the RSC.
-	            The tcs-offset specifies the start address of the
-	            TCS in the DRVs.
-
-- reg-names:
-	Usage: required
-	Value type: <string>
-	Definition: Maps the register specified in the reg property. Must be
-	            "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-interrupt>
-	Definition: The interrupt that trips when a message complete/response
-	           is received for this DRV from the accelerators.
-
-- qcom,drv-id:
-	Usage: required
-	Value type: <u32>
-	Definition: The id of the DRV in the RSC block that will be used by
-		    this controller.
-
-- qcom,tcs-config:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The tuple defining the configuration of TCS.
-	            Must have 2 cells which describe each TCS type.
-	            <type number_of_tcs>.
-	            The order of the TCS must match the hardware
-	            configuration.
-	- Cell #1 (TCS Type): TCS types to be specified -
-	            ACTIVE_TCS
-	            SLEEP_TCS
-	            WAKE_TCS
-	            CONTROL_TCS
-	- Cell #2 (Number of TCS): <u32>
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: Name for the RSC. The name would be used in trace logs.
-
-Drivers that want to use the RSC to communicate with RPMH must specify their
-bindings as child nodes of the RSC controllers they wish to communicate with.
-
-Example 1:
-
-For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the
-register offsets for DRV2 start at 0D00, the register calculations are like
-this -
-DRV0: 0x179C0000
-DRV2: 0x179C0000 + 0x10000 = 0x179D0000
-DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
-TCS-OFFSET: 0xD00
-
-	apps_rsc: rsc@179c0000 {
-		label = "apps_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0x179c0000 0x10000>,
-		      <0x179d0000 0x10000>,
-		      <0x179e0000 0x10000>;
-		reg-names = "drv-0", "drv-1", "drv-2";
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0xd00>;
-		qcom,drv-id = <2>;
-		qcom,tcs-config = <ACTIVE_TCS  2>,
-				  <SLEEP_TCS   3>,
-				  <WAKE_TCS    3>,
-				  <CONTROL_TCS 1>;
-	};
-
-Example 2:
-
-For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
-register offsets for DRV0 start at 01C00, the register calculations are like
-this -
-DRV0: 0xAF20000
-TCS-OFFSET: 0x1C00
-
-	disp_rsc: rsc@af20000 {
-		label = "disp_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0xaf20000 0x10000>;
-		reg-names = "drv-0";
-		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0x1c00>;
-		qcom,drv-id = <0>;
-		qcom,tcs-config = <ACTIVE_TCS  0>,
-				  <SLEEP_TCS   1>,
-				  <WAKE_TCS    1>,
-				  <CONTROL_TCS 0>;
-	};