diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-05 06:11:25 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-06-05 06:11:25 +0300 |
commit | 571d54ed91c0fae174d933683c0c2e11c84843d9 (patch) | |
tree | fedc4c05816f9adff472889fca5ba13039683121 /Documentation/devicetree/bindings/soc | |
parent | 9d71d3cd9ef040c284506648285915e9ba4d08c4 (diff) | |
parent | 8211d1e83aded34631aa87fa37f97d7bb712e925 (diff) | |
download | linux-571d54ed91c0fae174d933683c0c2e11c84843d9.tar.xz |
Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert various DT (non-binding) doc files to ReST
- Various improvements to device link code
- Fix __of_attach_node_sysfs refcounting bug
- Add support for 'memory-region-names' with reserved-memory binding
- Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
Shanghai Awinic Technology Co., MikroTik, Silex Insight
- A bunch more binding conversions to DT schema. Only 3K to go.
- Add a minimum version check for schema tools
- Treewide dropping of 'allOf' usage with schema references. Not needed
in new json-schema spec.
- Some formatting clean-ups of schemas
* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
dt-bindings: clock: Add documentation for X1830 bindings.
dt-bindings: mailbox: Convert imx mu to json-schema
dt-bindings: power: Convert imx gpcv2 to json-schema
dt-bindings: power: Convert imx gpc to json-schema
dt-bindings: Merge gpio-usb-b-connector with usb-connector
dt-bindings: timer: renesas: cmt: Convert to json-schema
dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
dt-bindings: timer: Convert i.MX GPT to json-schema
dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
dt-bindings: serial: Add binding for UART pin swap
dt-bindings: geni-se: Add interconnect binding for GENI QUP
dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
dt-bindings: input: touchscreen: edt-ft5x06: change reg property
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
dt-bindings: timer: renesas: mtu2: Convert to json-schema
of/fdt: Remove redundant kbasename function call
dt-bindings: clock: Convert i.MX1 clock to json-schema
dt-bindings: clock: Convert i.MX21 clock to json-schema
dt-bindings: clock: Convert i.MX25 clock to json-schema
...
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
3 files changed, 230 insertions, 99 deletions
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index cb008fd188d8..02b2d5ba01d6 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -26,11 +26,11 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,meson8-canvas - - amlogic,meson8b-canvas - - amlogic,meson8m2-canvas - - const: amlogic,canvas + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas - const: amlogic,canvas # GXBB and newer SoCs reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt deleted file mode 100644 index dab7ca9f250c..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ /dev/null @@ -1,94 +0,0 @@ -Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller - -Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper -is a programmable module for supporting a wide range of serial interfaces -like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial -Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP -Wrapper controller is modeled as a node with zero or more child nodes each -representing a serial engine. - -Required properties: -- compatible: Must be "qcom,geni-se-qup". -- reg: Must contain QUP register address and length. -- clock-names: Must contain "m-ahb" and "s-ahb". -- clocks: AHB clocks needed by the device. - -Required properties if child node exists: -- #address-cells: Must be <1> for Serial Engine Address -- #size-cells: Must be <1> for Serial Engine Address Size -- ranges: Must be present - -Properties for children: - -A GENI based QUP wrapper controller node can contain 0 or more child nodes -representing serial devices. These serial devices can be a QCOM UART, I2C -controller, SPI controller, or some combination of aforementioned devices. -Please refer below the child node definitions for the supported serial -interface protocols. - -Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller - -Required properties: -- compatible: Must be "qcom,geni-i2c". -- reg: Must contain QUP register address and length. -- interrupts: Must contain I2C interrupt. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> for I2C device address. -- #size-cells: Must be <0> as I2C addresses have no size component. - -Optional property: -- clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 100000Hz. - -Child nodes should conform to I2C bus binding as described in i2c.txt. - -Qualcomm Technologies Inc. GENI Serial Engine based UART Controller - -Required properties: -- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart". -- reg: Must contain UART register location and length. -- interrupts: Must contain UART core interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. - -Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller -node binding is described in -Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt. - -Example: - geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x8c0000 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - i2c0: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0xa94000 0x4000>; - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_i2c_5_active>; - pinctrl-1 = <&qup_1_i2c_5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; - - uart0: serial@a88000 { - compatible = "qcom,geni-debug-uart"; - reg = <0xa88000 0x7000>; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_uart_3_active>; - pinctrl-1 = <&qup_1_uart_3_sleep>; - }; - - } diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml new file mode 100644 index 000000000000..dee8bb2b69fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Mukesh Savaliya <msavaliy@codeaurora.org> + - Akash Asthana <akashast@codeaurora.org> + +description: | + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + enum: + - qcom,geni-se-qup + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + interconnects: + maxItems: 1 + + interconnect-names: + const: qup-core + +required: + - compatible + - reg + - clock-names + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + description: Common properties for GENI Serial Engine based I2C, SPI and + UART controller. + + properties: + reg: + description: GENI Serial Engine register address and length. + maxItems: 1 + + clock-names: + const: se + + clocks: + description: Serial engine core clock needed by the device. + maxItems: 1 + + interconnects: + minItems: 2 + maxItems: 3 + + interconnect-names: + minItems: 2 + items: + - const: qup-core + - const: qup-config + - const: qup-memory + + required: + - reg + - clock-names + - clocks + + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + allOf: + - $ref: /spi/spi-controller.yaml# + + properties: + compatible: + enum: + - qcom,geni-spi + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - compatible + - interrupts + - "#address-cells" + - "#size-cells" + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + properties: + compatible: + enum: + - qcom,geni-i2c + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. + default: 100000 + + required: + - compatible + - interrupts + - "#address-cells" + - "#size-cells" + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + allOf: + - $ref: /schemas/serial.yaml# + + properties: + compatible: + enum: + - qcom,geni-uart + - qcom,geni-debug-uart + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + required: + - compatible + - interrupts + + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xa94000 0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_i2c_5_active>; + pinctrl-1 = <&qup_1_i2c_5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0xa88000 0 0x7000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_uart_3_active>; + pinctrl-1 = <&qup_1_uart_3_sleep>; + }; + }; + }; + +... |