diff options
author | Shengjiu Wang <shengjiu.wang@nxp.com> | 2024-04-25 09:35:06 +0300 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2024-04-26 05:09:17 +0300 |
commit | 2da01ca3674c6e90dbeeda02168849e2ec877edc (patch) | |
tree | 3b25f6a7bd92f16aa8d0a1dda33636ddad5aa925 /Documentation/devicetree/bindings/sound | |
parent | 466c8c46b4ba763435b2a787b7824d9f0fd3e76e (diff) | |
download | linux-2da01ca3674c6e90dbeeda02168849e2ec877edc.tar.xz |
ASoC: dt-bindings: fsl,ssi: Convert to YAML
Convert the fsl,ssi binding to YAML.
Add below compatible strings which were not listed
in document:
fsl,imx50-ssi
fsl,imx53-ssi
fsl,imx25-ssi
fsl,imx27-ssi
fsl,imx6q-ssi
fsl,imx6sl-ssi
fsl,imx6sx-ssi
Add below fsl,mode strings which were not listed.
i2s-slave
i2s-master
lj-slave
lj-master
rj-slave
rj-master
Add 'ac97-gpios' property which were not listed.
Then dtbs_check can pass.
And remove the 'codec' description which should be
in the 'codec' binding doc.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/1714026906-16723-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
-rw-r--r-- | Documentation/devicetree/bindings/sound/fsl,ssi.txt | 87 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/sound/fsl,ssi.yaml | 194 |
2 files changed, 194 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt deleted file mode 100644 index 7e15a85cecd2..000000000000 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ /dev/null @@ -1,87 +0,0 @@ -Freescale Synchronous Serial Interface - -The SSI is a serial device that communicates with audio codecs. It can -be programmed in AC97, I2S, left-justified, or right-justified modes. - -Required properties: -- compatible: Compatible list, should contain one of the following - compatibles: - fsl,mpc8610-ssi - fsl,imx51-ssi - fsl,imx35-ssi - fsl,imx21-ssi -- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. -- reg: Offset and length of the register set for the device. -- interrupts: <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. -- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. - This number is the maximum allowed value for SFCSR[TFWM0]. - - clocks: "ipg" - Required clock for the SSI unit - "baud" - Required clock for SSI master mode. Otherwise this - clock is not used - -Required are also ac97 link bindings if ac97 is used. See -Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary -bindings. - -Optional properties: -- codec-handle: Phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. -- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to - filter the codec stream. This is necessary for some boards - where an incompatible codec is connected to this SSI, e.g. - on pca100 and pcm043. -- dmas: Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. -- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq - is not defined. -- fsl,mode: The operating mode for the AC97 interface only. - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master -- fsl,ssi-asynchronous: - If specified, the SSI is to be programmed in asynchronous - mode. In this mode, pins SRCK, STCK, SRFS, and STFS must - all be connected to valid signals. In synchronous mode, - SRCK and SRFS are ignored. Asynchronous mode allows - playback and capture to use different sample sizes and - sample rates. Some drivers may require that SRCK and STCK - be connected together, and SRFS and STFS be connected - together. This would still allow different sample sizes, - but not different sample rates. -- fsl,playback-dma: Phandle to a node for the DMA channel to use for - playback of audio. This is typically dictated by SOC - design. See the notes below. - Only used on Power Architecture. -- fsl,capture-dma: Phandle to a node for the DMA channel to use for - capture (recording) of audio. This is typically dictated - by SOC design. See the notes below. - Only used on Power Architecture. - -Child 'codec' node required properties: -- compatible: Compatible list, contains the name of the codec - -Child 'codec' node optional properties: -- clock-frequency: The frequency of the input clock, which typically comes - from an on-board dedicated oscillator. - -Notes on fsl,playback-dma and fsl,capture-dma: - -On SOCs that have an SSI, specific DMA channels are hard-wired for playback -and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for -playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for -playback and DMA channel 3 for capture. The developer can choose which -DMA controller to use, but the channels themselves are hard-wired. The -purpose of these two properties is to represent this hardware design. - -The device tree nodes for the DMA channels that are referenced by -"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with -"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. -"fsl,mpc8610-dma-channel") can remain. If these nodes are left as -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA -drivers (fsldma) will attempt to use them, and it will conflict with the -sound drivers. diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.yaml b/Documentation/devicetree/bindings/sound/fsl,ssi.yaml new file mode 100644 index 000000000000..4ab10cd3b520 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,ssi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Synchronous Serial Interface + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: + Notes on fsl,playback-dma and fsl,capture-dma + On SOCs that have an SSI, specific DMA channels are hard-wired for playback + and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for + playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for + playback and DMA channel 3 for capture. The developer can choose which + DMA controller to use, but the channels themselves are hard-wired. The + purpose of these two properties is to represent this hardware design. + + The device tree nodes for the DMA channels that are referenced by + "fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with + "fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. + "fsl,mpc8610-dma-channel") can remain. If these nodes are left as + "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA + drivers (fsldma) will attempt to use them, and it will conflict with the + sound drivers. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx50-ssi + - fsl,imx53-ssi + - const: fsl,imx51-ssi + - const: fsl,imx21-ssi + - items: + - enum: + - fsl,imx25-ssi + - fsl,imx27-ssi + - fsl,imx35-ssi + - fsl,imx51-ssi + - const: fsl,imx21-ssi + - items: + - enum: + - fsl,imx6q-ssi + - fsl,imx6sl-ssi + - fsl,imx6sx-ssi + - const: fsl,imx51-ssi + - items: + - const: fsl,imx21-ssi + - items: + - const: fsl,mpc8610-ssi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The ipg clock for register access + - description: clock for SSI master mode + minItems: 1 + + clock-names: + items: + - const: ipg + - const: baud + minItems: 1 + + dmas: + oneOf: + - items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + - items: + - description: DMA controller phandle and request line for RX0 + - description: DMA controller phandle and request line for TX0 + - description: DMA controller phandle and request line for RX1 + - description: DMA controller phandle and request line for TX1 + + dma-names: + oneOf: + - items: + - const: rx + - const: tx + - items: + - const: rx0 + - const: tx0 + - const: rx1 + - const: tx1 + + "#sound-dai-cells": + const: 0 + description: optional, some dts node didn't add it. + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: The SSI index + + ac97-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Please refer to soc-ac97link.txt + + codec-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + + fsl,fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for SFCSR[TFWM0]. + enum: [8, 15] + + fsl,fiq-stream-filter: + type: boolean + description: + Disabled DMA and use FIQ instead to filter the codec stream. + This is necessary for some boards where an incompatible codec + is connected to this SSI, e.g. on pca100 and pcm043. + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ ac97-slave, ac97-master, i2s-slave, i2s-master, + lj-slave, lj-master, rj-slave, rj-master ] + description: | + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - Left justified mode, SSI is clock slave + "lj-master" - Left justified mode, SSI is clock master + "rj-slave" - Right justified mode, SSI is clock slave + "rj-master" - Right justified mode, SSI is clock master + + fsl,ssi-asynchronous: + type: boolean + description: If specified, the SSI is to be programmed in asynchronous + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must + all be connected to valid signals. In synchronous mode, + SRCK and SRFS are ignored. Asynchronous mode allows + playback and capture to use different sample sizes and + sample rates. Some drivers may require that SRCK and STCK + be connected together, and SRFS and STFS be connected + together. This would still allow different sample sizes, + but not different sample rates. + + fsl,playback-dma: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to a node for the DMA channel to use for + playback of audio. This is typically dictated by SOC + design. Only used on Power Architecture. + + fsl,capture-dma: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to a node for the DMA channel to use for + capture (recording) of audio. This is typically dictated + by SOC design. Only used on Power Architecture. + +required: + - compatible + - reg + - interrupts + - fsl,fifo-depth + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + ssi@2028000 { + compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + fsl,fifo-depth = <15>; + }; |