diff options
author | Anton Vorontsov <anton.vorontsov@linaro.org> | 2012-12-12 10:15:57 +0400 |
---|---|---|
committer | Anton Vorontsov <anton.vorontsov@linaro.org> | 2012-12-12 10:15:57 +0400 |
commit | 76d8a23b127020472207b281427d3e9f4f1227e4 (patch) | |
tree | e14d7063d96d850fb259115d6fb08cbeb98ccf88 /Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt | |
parent | eba3b670a9166a91be5a11fe33290dca6b9457a2 (diff) | |
parent | 1ebaf4f4e6912199f8a4e30ba3ab55da2b71bcdf (diff) | |
download | linux-76d8a23b127020472207b281427d3e9f4f1227e4.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
The merge is merely to fix conflicts before sending a pull request.
Conflicts:
drivers/power/ab8500_btemp.c
drivers/power/ab8500_charger.c
drivers/power/ab8500_fg.c
drivers/power/abx500_chargalg.c
drivers/power/max8925_power.c
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt')
-rw-r--r-- | Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt index 2ee903fad25c..273a8d5b3300 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -6,11 +6,19 @@ Required properties: - reg : Address and length of the register set for the device - interrupts : Should contain the auart interrupt numbers +Optional properties: +- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other + is for TX. If you add this property, it also means that you + will enable the DMA support for the auart. + Note: due to the hardware bug in imx23(see errata : 2836), + only the imx28 can enable the DMA support for the auart. + Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + fsl,auart-dma-channel = <8 9>; }; Note: Each auart port should have an alias correctly numbered in "aliases" |