Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - DT schema conversions for Samsung clocks, RNG bindings, Qcom
     Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
     Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb

   - DT schema conversions for Broadcom platforms: interrupt
     controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
     iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
     SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
     arbiter, and SATA

   - Add binding schemas for Tegra210 EMC table, TI DC-DC converters,

   - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues

   - More fixes due to 'unevaluatedProperties' enabling

   - Data type fixes and clean-ups of binding examples found in
     preparation to move to validating DTB files directly (instead of
     intermediate YAML representation.

   - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus

   - Add various new compatible strings

  DT core:

   - Silence a warning for overlapping reserved memory regions

   - Reimplement unittest overlay tracking

   - Fix stack frame size warning in unittest

   - Clean-ups of early FDT scanning functions

   - Fix handling of "linux,usable-memory-range" on EFI booted systems

   - Add support for 'fail' status on CPU nodes

   - Improve error message in of_phandle_iterator_next()

   - kbuild: Disable duplicate unit-address warnings for disabled nodes"

* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
  dt-bindings: net: mdio: Drop resets/reset-names child properties
  dt-bindings: clock: samsung: convert S5Pv210 to dtschema
  dt-bindings: clock: samsung: convert Exynos5410 to dtschema
  dt-bindings: clock: samsung: convert Exynos5260 to dtschema
  dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
  dt-bindings: clock: samsung: convert Exynos7 to dtschema
  dt-bindings: clock: samsung: convert Exynos5433 to dtschema
  dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
  dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
  dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
  dt-bindings: clock: imx5: Drop clock consumer node from example
  dt-bindings: Drop required 'interrupt-parent'
  dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
  dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
  dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
  dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  dt-bindings: net: stm32-dwmac: Make each example a separate entry
  dt-bindings: net: Cleanup MDIO node schemas
  ...

4 files changed, 59 insertions, 29 deletions

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
deleted file mode 100644
index c9f52b97cef1..000000000000
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Broadcom USB Device Controller (BDC)
-====================================
-
-Required properties:
-
-- compatible: must be one of:
-                "brcm,bdc-udc-v2"
-                "brcm,bdc"
-- reg: the base register address and length
-- interrupts: the interrupt line for this controller
-
-Optional properties:
-
-On Broadcom STB platforms, these properties are required:
-
-- phys: phandle to one or two USB PHY blocks
-        NOTE: Some SoC's have a single phy and some have
-        USB 2.0 and USB 3.0 phys
-- clocks: phandle to the functional clock of this block
-
-Example:
-
-        bdc@f0b02000 {
-                compatible = "brcm,bdc-udc-v2";
-                reg = <0xf0b02000 0xfc4>;
-                interrupts = <0x0 0x60 0x0>;
-                phys = <&usbphy_0 0x0>;
-                clocks = <&sw_usbd>;
-        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
new file mode 100644
index 000000000000..9e561fee98f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB Device Controller (BDC)
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bdc-udc-v2
+          - brcm,bdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB 2.0 or 3.0 PHY
+      - description: USB 3.0 PHY if there is a dedicated 2.0 PHY
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        usb@f0b02000 {
+                compatible = "brcm,bdc-udc-v2";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
index 43b91ab62004..d3511f48cd55 100644
--- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -13,6 +13,9 @@ properties:
   compatible:
     const: intel,keembay-dwc3
 
+  reg:
+    maxItems: 1
+
   clocks:
     maxItems: 4
 
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 25ac2c93dc6c..d29ffcd27472 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -36,6 +36,9 @@ properties:
         - const: synopsys,dwc3
           deprecated: true
 
+  reg:
+    maxItems: 1
+
   interrupts:
     description:
       It's either a single common DWC3 interrupt (dwc_usb3) or individual
@@ -65,6 +68,9 @@ properties:
         - enum: [bus_early, ref, suspend]
         - true
 
+  iommus:
+    maxItems: 1
+
   usb-phy:
     minItems: 1
     items: