diff options
author | Bjorn Helgaas <bhelgaas@google.com> | 2017-09-02 00:35:50 +0300 |
---|---|---|
committer | Bjorn Helgaas <bhelgaas@google.com> | 2017-09-02 00:35:50 +0300 |
commit | 96291d565550c1fd363e488cc17cb3189d2e4cc2 (patch) | |
tree | 5edda68ba7ef9568df9a8a843a4e5c03be656ed8 /Documentation/devicetree | |
parent | cacf7eaf2a36cc51c24b591d681676b6d27a7a6e (diff) | |
download | linux-96291d565550c1fd363e488cc17cb3189d2e4cc2.tar.xz |
PCI: Fix typos and whitespace errors
Fix various typos and whitespace errors:
s/Synopsis/Synopsys/
s/Designware/DesignWare/
s/Keystine/Keystone/
s/gpio/GPIO/
s/pcie/PCIe/
s/phy/PHY/
s/confgiruation/configuration/
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Diffstat (limited to 'Documentation/devicetree')
22 files changed, 78 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt index 35a465362408..b9165b72473c 100644 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -1,11 +1,11 @@ * Freescale 83xx and 512x PCI bridges -Freescale 83xx and 512x SOCs include the same pci bridge core. +Freescale 83xx and 512x SOCs include the same PCI bridge core. 83xx/512x specific notes: - reg: should contain two address length tuples - The first is for the internal pci bridge registers - The second is for the pci config space access registers + The first is for the internal PCI bridge registers + The second is for the PCI config space access registers Example (MPC8313ERDB) pci0: pci@e0008500 { diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 2951a6a50704..495880193adc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -7,21 +7,21 @@ Required properties: "Txs": TX slave port region "Cra": Control register access region - interrupt-parent: interrupt source phandle. -- interrupts: specifies the interrupt source of the parent interrupt controller. - The format of the interrupt specifier depends on the parent interrupt - controller. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends + on the parent interrupt controller. - device_type: must be "pci" - #address-cells: set to <3> -- #size-cells: set to <2> +- #size-cells: set to <2> - #interrupt-cells: set to <1> -- ranges: describes the translation of addresses for root ports and standard - PCI regions. +- ranges: describes the translation of addresses for root ports and + standard PCI regions. - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. Optional properties: -- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe - controller. +- msi-parent: Link to the hardware entity that serves as the MSI controller + for this PCIe controller. - bus-range: PCI bus numbers covered Example @@ -45,5 +45,5 @@ Example <0 0 0 3 &pcie_0 3>, <0 0 0 4 &pcie_0 4>; ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 - 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt index 5ecaea1e6eee..4e4aee4439ea 100644 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -6,7 +6,7 @@ and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "axis,artpec6-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller (DBI), - the phy controller, and configuration address space. + the PHY controller, and configuration address space. - reg-names: Must include the following entries: - "dbi" - "phy" diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index b2480dd38c11..1da7ade3183c 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,4 +1,4 @@ -* Synopsys Designware PCIe interface +* Synopsys DesignWare PCIe interface Required properties: - compatible: should contain "snps,dw-pcie" to identify the core. @@ -17,29 +17,27 @@ RC mode: properties to define the mapping of the PCIe interface to interrupt numbers. EP mode: -- num-ib-windows: number of inbound address translation - windows -- num-ob-windows: number of outbound address translation - windows +- num-ib-windows: number of inbound address translation windows +- num-ob-windows: number of outbound address translation windows Optional properties: - num-lanes: number of lanes to use (this property should be specified unless the link is brought already up in BIOS) -- reset-gpio: gpio pin number of power good signal +- reset-gpio: GPIO pin number of power good signal - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pcie" - "pcie_bus" RC mode: -- num-viewport: number of view ports configured in - hardware. If a platform does not specify it, the driver assumes 2. -- bus-range: PCI bus numbers covered (it is recommended - for new devicetrees to specify this property, to keep backwards - compatibility a range of 0x00-0xff is assumed if not present) +- num-viewport: number of view ports configured in hardware. If a platform + does not specify it, the driver assumes 2. +- bus-range: PCI bus numbers covered (it is recommended for new devicetrees + to specify this property, to keep backwards compatibility a range of + 0x00-0xff is assumed if not present) + EP mode: -- max-functions: maximum number of functions that can be - configured +- max-functions: maximum number of functions that can be configured Example configuration: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index cf92d3ba5a26..7b1e48bf172b 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -1,6 +1,6 @@ * Freescale i.MX6 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index a339dbb15493..b0fd3ba66ec9 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -1,7 +1,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description -HiSilicon PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver and inherits +HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 68ffa0fbcd73..6e217c63123d 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -1,8 +1,8 @@ HiSilicon Kirin SoCs PCIe host DT description -Kirin PCIe host controller is based on Designware PCI core. -It shares common functions with PCIe Designware core driver -and inherits common properties defined in +Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and +inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt. Additional properties are described here: @@ -16,7 +16,7 @@ Required properties "apb": apb Ctrl register defined by Kirin; "phy": apb PHY register defined by Kirin; "config": PCIe configuration space registers. -- reset-gpios: The gpio to generate PCIe perst assert and deassert signal. +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. Optional properties: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index ee1c72d5162e..e00c706f85d9 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -16,7 +16,7 @@ Required properties: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" "fsl,ls1046a-pcie" -- reg: base addresses and lengths of the PCIe controller +- reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 2de6f65ecfb1..196e034f6879 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -77,7 +77,7 @@ and the following optional properties: - marvell,pcie-lane: the physical PCIe lane number, for ports having multiple lanes. If this property is not found, we assume that the value is 0. -- reset-gpios: optional gpio to PERST# +- reset-gpios: optional GPIO to PERST# - reset-delay-us: delay in us to wait after reset de-assertion, if not specified will default to 100ms, as required by the PCIe specification. diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 598533a57d79..c54a84350ec8 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -1,6 +1,6 @@ * Marvell Armada 7K/8K PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index d08a4d51108f..7e05487544ed 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -1,12 +1,12 @@ TI Keystone PCIe interface -Keystone PCI host Controller is based on Designware PCI h/w version 3.65. -It shares common functions with PCIe Designware core driver and inherit -common properties defined in +Keystone PCI host Controller is based on the Synopsys DesignWare PCI +hardware version 3.65. It shares common functions with the PCIe DesignWare +core driver and inherits common properties defined in Documentation/devicetree/bindings/pci/designware-pci.txt Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt -for the details of Designware DT bindings. Additional properties are +for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. Required Properties:- @@ -52,13 +52,12 @@ pcie_intc: Interrupt controller device node for Legacy IRQ chip }; Optional properties:- - phys: phandle to Generic Keystone SerDes phy for PCI - phy-names: name of the Generic Keystine SerDes phy for PCI + phys: phandle to generic Keystone SerDes PHY for PCI + phy-names: name of the generic Keystone SerDes PHY for PCI - If boot loader already does PCI link establishment, then phys and phy-names shouldn't be present. interrupts: platform interrupt for error interrupts. -Designware DT Properties not applicable for Keystone PCI +DesignWare DT Properties not applicable for Keystone PCI 1. pcie_bus clock-names not used. Instead, a phandle to phys is used. - diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 9d418b71774f..1425bb639300 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -20,7 +20,7 @@ Value type: <stringlist> Definition: Must include the following entries - "parf" Qualcomm specific registers - - "dbi" Designware PCIe registers + - "dbi" DesignWare PCIe registers - "elbi" External local bus interface registers - "config" PCIe configuration space @@ -180,7 +180,7 @@ - <name>-gpios: Usage: optional Value type: <prop-encoded-array> - Definition: List of phandle and gpio specifier pairs. Should contain + Definition: List of phandle and GPIO specifier pairs. Should contain - "perst-gpios" PCIe endpoint reset signal line - "wake-gpios" PCIe endpoint wake signal line diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt index 8e0a1eb0acbb..a04ab1b76211 100644 --- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt +++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt @@ -71,7 +71,7 @@ - interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - The PCI host bridge node migh have additional sub-nodes representing + The PCI host bridge node might have additional sub-nodes representing the onboard PCI devices/PCI slots. Each such sub-node must have the following mandatory properties: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index bd27428dda61..6b5b388fbc99 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -14,7 +14,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; SoC-specific version corresponding to the platform first followed by the generic version. -- reg: base address and length of the pcie controller registers. +- reg: base address and length of the PCIe controller registers. - #address-cells: set to <3> - #size-cells: set to <2> - bus-range: PCI bus numbers covered @@ -25,15 +25,14 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; source for hardware related interrupts (e.g. link speed change). - #interrupt-cells: set to <1> - interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt - numbers. + to define the mapping of the PCIe interface to interrupt numbers. - clocks: from common clock binding: clock specifiers for the PCIe controller and PCIe bus clocks. - clock-names: from common clock binding: should be "pcie" and "pcie_bus". Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie: pcie@fe000000 { compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index 1453a734c2f5..1136e9282108 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -45,7 +45,7 @@ Required properties: Optional Property: - aspm-no-l0s: RC won't support ASPM L0s. This property is needed if using 24MHz OSC for RC's PHY. -- ep-gpios: contain the entry for pre-reset gpio +- ep-gpios: contain the entry for pre-reset GPIO - num-lanes: number of lanes to use - vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. - vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 7d3b09474657..34a11bfbfb60 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -1,29 +1,29 @@ * Samsung Exynos 5440 PCIe interface -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "samsung,exynos5440-pcie" -- reg: base addresses and lengths of the pcie controller, - the phy controller, additional register for the phy controller. - (Registers for the phy controller are DEPRECATED. +- reg: base addresses and lengths of the PCIe controller, + the PHY controller, additional register for the PHY controller. + (Registers for the PHY controller are DEPRECATED. Use the PHY framework.) - reg-names : First name should be set to "elbi". - And use the "config" instead of getting the confgiruation address space + And use the "config" instead of getting the configuration address space from "ranges". - NOTE: When use the "config" property, reg-names must be set. + NOTE: When using the "config" property, reg-names must be set. - interrupts: A list of interrupt outputs for level interrupt, pulse interrupt, special interrupt. -- phys: From PHY binding. Phandle for the Generic PHY. +- phys: From PHY binding. Phandle for the generic PHY. Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt -Other common properties refer to - Documentation/devicetree/binding/pci/designware-pcie.txt +For other common properties, refer to + Documentation/devicetree/bindings/pci/designware-pcie.txt Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; @@ -83,7 +83,7 @@ With using PHY framework: ... }; -Board specific DT Entry: +Board-specific DT Entry: pcie@290000 { reset-gpio = <&pin_ctrl 5 0>; diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt index 49ea76da7718..d5a14f5dad46 100644 --- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt +++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt @@ -1,12 +1,12 @@ SPEAr13XX PCIe DT detail: ================================ -SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy +SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY controller. Required properties: -- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". -- phys : phandle to phy node associated with pcie controller +- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". +- phys : phandle to PHY node associated with PCIe controller - phy-names : must be "pcie-phy" - All other definitions as per generic PCI bindings diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt index 6a07c96227e0..7f7af3044016 100644 --- a/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -1,6 +1,6 @@ TI PCI Controllers -PCIe Designware Controller +PCIe DesignWare Controller - compatible: Should be "ti,dra7-pcie" for RC Should be "ti,dra7-pcie-ep" for EP - phys : list of PHY specifiers (used by generic PHY framework) @@ -13,7 +13,7 @@ PCIe Designware Controller HOST MODE ========= - reg : Two register ranges as listed in the reg-names property - - reg-names : The first entry must be "ti-conf" for the TI specific registers + - reg-names : The first entry must be "ti-conf" for the TI-specific registers The second entry must be "rc-dbics" for the DesignWare PCIe registers The third entry must be "config" for the PCIe configuration space @@ -30,7 +30,7 @@ HOST MODE DEVICE MODE =========== - reg : Four register ranges as listed in the reg-names property - - reg-names : "ti-conf" for the TI specific registers + - reg-names : "ti-conf" for the TI-specific registers "ep_dbics" for the standard configuration registers as they are locally accessed within the DIF CS space "ep_dbics2" for the standard configuration registers as @@ -46,7 +46,7 @@ DEVICE MODE access. Optional Property: - - gpios : Should be added if a gpio line is required to drive PERST# line + - gpios : Should be added if a GPIO line is required to drive PERST# line NOTE: Two DT nodes may be added for each PCI controller; one for host mode and another for device mode. So in order for PCI to diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt index ebd1e7d0403e..0a702b13d2ac 100644 --- a/Documentation/devicetree/bindings/pci/versatile.txt +++ b/Documentation/devicetree/bindings/pci/versatile.txt @@ -5,7 +5,7 @@ PCI host controller found on the ARM Versatile PB board's FPGA. Required properties: - compatible: should contain "arm,versatile-pci" to identify the Versatile PCI controller. -- reg: base addresses and lengths of the pci controller. There must be 3 +- reg: base addresses and lengths of the PCI controller. There must be 3 entries: - Versatile-specific registers - Self Config space diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt index 36d881c8e6d4..09ac2dc3afc1 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -4,7 +4,7 @@ Required properties: - compatible: should be "apm,xgene1-msi" to identify X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node - reg: physical base address (0x79000000) and length (0x900000) for controller registers. These registers include the MSI termination address and data registers as well as the MSI interrupt status registers. @@ -13,7 +13,8 @@ Required properties: interrupt number 0x10 to 0x1f. - interrupt-names: not required -Each PCIe node needs to have property msi-parent that points to msi controller node +Each PCIe node needs to have property msi-parent that points to an MSI +controller node Examples: diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt index 1070b068c7c6..6fd2decfa66c 100644 --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt @@ -8,7 +8,7 @@ Required properties: property. - reg-names: Must include the following entries: "csr": controller configuration registers. - "cfg": pcie configuration space registers. + "cfg": PCIe configuration space registers. - #address-cells: set to <3> - #size-cells: set to <2> - ranges: ranges for the outbound memory, I/O regions. @@ -21,11 +21,11 @@ Required properties: Optional properties: - status: Either "ok" or "disabled". -- dma-coherent: Present if dma operations are coherent +- dma-coherent: Present if DMA operations are coherent Example: -SoC specific DT Entry: +SoC-specific DT Entry: pcie0: pcie@1f2b0000 { status = "disabled"; @@ -51,7 +51,7 @@ SoC specific DT Entry: }; -Board specific DT Entry: +Board-specific DT Entry: &pcie0 { status = "ok"; }; diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 3259798a1192..01bf7fdf4c19 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -15,9 +15,9 @@ Required properties: - device_type: must be "pci" - interrupts: Should contain NWL PCIe interrupt - interrupt-names: Must include the following entries: - "msi1, msi0": interrupt asserted when MSI is received + "msi1, msi0": interrupt asserted when an MSI is received "intx": interrupt asserted when a legacy interrupt is received - "misc": interrupt asserted when miscellaneous is received + "misc": interrupt asserted when miscellaneous interrupt is received - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCI interface to interrupt numbers. - ranges: ranges for the PCI memory regions (I/O space region is not @@ -26,7 +26,8 @@ Required properties: detailed explanation - msi-controller: indicates that this is MSI controller node - msi-parent: MSI parent of the root complex itself -- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts +- legacy-interrupt-controller: Interrupt controller device node for Legacy + interrupts - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: should be set to 1 - #address-cells: specifies the number of cells needed to encode an |