diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 21:29:05 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 21:29:05 +0300 |
| commit | 064d7dcf51a82b480e953a15cca47e5df0426502 (patch) | |
| tree | b34ab58ee35e827c14071024dfc79fe50a5f31e6 /Documentation/devicetree | |
| parent | f3dd0c53370e70c0f9b7e931bbec12916f3bb8cc (diff) | |
| parent | 7933b90b42896f5b6596e6a829bb31c5121fc2a9 (diff) | |
| download | linux-064d7dcf51a82b480e953a15cca47e5df0426502.tar.xz | |
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
Diffstat (limited to 'Documentation/devicetree')
59 files changed, 2078 insertions, 785 deletions
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml index 3e63f79890b4..88575da1e6d5 100644 --- a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml @@ -15,7 +15,9 @@ description: | properties: compatible: - const: mediatek,mt8186-dsp + enum: + - mediatek,mt8186-dsp + - mediatek,mt8188-dsp reg: items: diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.txt b/Documentation/devicetree/bindings/sound/adi,adau7002.txt deleted file mode 100644 index f144ee1abf85..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau7002.txt +++ /dev/null @@ -1,19 +0,0 @@ -Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter - -Required properties: - - - compatible: Must be "adi,adau7002" - -Optional properties: - - - IOVDD-supply: Phandle and specifier for the power supply providing the IOVDD - supply as covered in Documentation/devicetree/bindings/regulator/regulator.txt - - If this property is not present it is assumed that the supply pin is - hardwired to always on. - -Example: - adau7002: pdm-to-i2s { - compatible = "adi,adau7002"; - IOVDD-supply = <&supply>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml new file mode 100644 index 000000000000..fcca0fde7d86 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau7002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: adi,adau7002 + + IOVDD-supply: + description: + IOVDD power supply, if skipped then it is assumed that the supply pin is + hardwired to always on. + + wakeup-delay-ms: + description: + Delay after power up needed for device to settle. + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + audio-codec { + compatible = "adi,adau7002"; + IOVDD-supply = <&pp1800_l15a>; + #sound-dai-cells = <0>; + wakeup-delay-ms = <80>; + }; diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml index 010574645e6a..75e13414d6eb 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.yaml +++ b/Documentation/devicetree/bindings/sound/ak4613.yaml @@ -25,6 +25,13 @@ properties: "#sound-dai-cells": const: 0 + ports: + $ref: audio-graph-port.yaml#/definitions/ports + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + patternProperties: "^asahi-kasei,in[1-2]-single-end$": description: Input Pin 1 - 2. diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt deleted file mode 100644 index fa4545ed81ca..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Amlogic Audio FIFO controllers - -Required properties: -- compatible: 'amlogic,axg-toddr' or - 'amlogic,axg-toddr' or - 'amlogic,g12a-frddr' or - 'amlogic,g12a-toddr' or - 'amlogic,sm1-frddr' or - 'amlogic,sm1-toddr' -- reg: physical base address of the controller and length of memory - mapped region. -- interrupts: interrupt specifier for the fifo. -- clocks: phandle to the fifo peripheral clock provided by the audio - clock controller. -- resets: list of reset phandle, one for each entry reset-names. -- reset-names: should contain the following: - * "arb" : memory ARB line (required) - * "rst" : dedicated device reset line (optional) -- #sound-dai-cells: must be 0. -- amlogic,fifo-depth: The size of the controller's fifo in bytes. This - is useful for determining certain configuration such - as the flush threshold of the fifo - -Example of FRDDR A on the A113 SoC: - -frddr_a: audio-controller@1c0 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - fifo-depth = <512>; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml new file mode 100644 index 000000000000..b1b48d683101 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-fifo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic AXG Audio FIFO controllers + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + oneOf: + - enum: + - amlogic,axg-toddr + - amlogic,axg-frddr + - items: + - enum: + - amlogic,g12a-toddr + - amlogic,sm1-toddr + - const: amlogic,axg-toddr + - items: + - enum: + - amlogic,g12a-frddr + - amlogic,sm1-frddr + - const: amlogic,axg-frddr + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: Peripheral clock + + interrupts: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + + amlogic,fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Size of the controller's fifo in bytes + +required: + - compatible + - reg + - "#sound-dai-cells" + - clocks + - interrupts + - resets + - amlogic,fifo-depth + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-toddr + - amlogic,sm1-toddr + - amlogic,g12a-frddr + - amlogic,sm1-frddr + + then: + properties: + resets: + minItems: 2 + reset-names: + items: + - const: arb + - const: rst + required: + - reset-names + + else: + properties: + resets: + maxItems: 1 + reset-names: + const: arb + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> + #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + + audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; + reg = <0x1c0 0x1c>; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; + resets = <&arb>, <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt deleted file mode 100644 index 716878107a24..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Amlogic Audio PDM input - -Required properties: -- compatible: 'amlogic,axg-pdm' or - 'amlogic,g12a-pdm' or - 'amlogic,sm1-pdm' -- reg: physical base address of the controller and length of memory - mapped region. -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "pclk" : peripheral clock. - * "dclk" : pdm digital clock - * "sysclk" : dsp system clock -- #sound-dai-cells: must be 0. - -Optional property: -- resets: phandle to the dedicated reset line of the pdm input. - -Example of PDM on the A113 SoC: - -pdm: audio-controller@ff632000 { - compatible = "amlogic,axg-pdm"; - reg = <0x0 0xff632000 0x0 0x34>; - #sound-dai-cells = <0>; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml new file mode 100644 index 000000000000..df21dd72fc65 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-pdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Audio AXG PDM input + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,g12a-pdm + - amlogic,sm1-pdm + - const: amlogic,axg-pdm + - const: amlogic,axg-pdm + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: Peripheral clock + - description: PDM digital clock + - description: DSP system clock + + clock-names: + items: + - const: pclk + - const: dclk + - const: sysclk + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#sound-dai-cells" + - clocks + - clock-names + +allOf: + - $ref: dai-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-pdm + - amlogic,sm1-pdm + then: + required: + - resets + + else: + properties: + resets: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + + audio-controller@ff632000 { + compatible = "amlogic,axg-pdm"; + reg = <0xff632000 0x34>; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt deleted file mode 100644 index 80b411296480..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt +++ /dev/null @@ -1,124 +0,0 @@ -Amlogic AXG sound card: - -Required properties: - -- compatible: "amlogic,axg-sound-card" -- model : User specified audio sound card name, one string - -Optional properties: - -- audio-aux-devs : List of phandles pointing to auxiliary devices -- audio-widgets : Please refer to widgets.txt. -- audio-routing : A list of the connections between audio components. - -Subnodes: - -- dai-link: Container for dai-link level properties and the CODEC - sub-nodes. There should be at least one (and probably more) - subnode of this type. - -Required dai-link properties: - -- sound-dai: phandle and port of the CPU DAI. - -Required TDM Backend dai-link properties: -- dai-format : CPU/CODEC common audio format - -Optional TDM Backend dai-link properties: -- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks -- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks - When omitted, mask is assumed to have to no - slots. A valid must have at one slot, so at - least one these mask should be provided with - an enabled slot. -- dai-tdm-slot-num : Please refer to tdm-slot.txt. - If omitted, slot number is set to accommodate the largest - mask provided. -- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted. -- mclk-fs : Multiplication factor between stream rate and mclk - -Backend dai-link subnodes: - -- codec: dai-link representing backend links should have at least one subnode. - One subnode for each codec of the dai-link. - dai-link representing frontend links have no codec, therefore have no - subnodes - -Required codec subnodes properties: - -- sound-dai: phandle and port of the CODEC DAI. - -Optional codec subnodes properties: - -- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt. -- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt. - -Example: - -sound { - compatible = "amlogic,axg-sound-card"; - model = "AXG-S420"; - audio-aux-devs = <&tdmin_a>, <&tdmout_c>; - audio-widgets = "Line", "Lineout", - "Line", "Linein", - "Speaker", "Speaker1 Left", - "Speaker", "Speaker1 Right"; - "Speaker", "Speaker2 Left", - "Speaker", "Speaker2 Right"; - audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 2", "TDM_C Capture", - "TDMIN_A IN 5", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "Lineout", "Lineout AOUTL", - "Lineout", "Lineout AOUTR", - "Speaker1 Left", "SPK1 OUT_A", - "Speaker2 Left", "SPK2 OUT_A", - "Speaker1 Right", "SPK1 OUT_B", - "Speaker2 Right", "SPK2 OUT_B", - "Linein AINL", "Linein", - "Linein AINR", "Linein"; - - dai-link@0 { - sound-dai = <&frddr_a>; - }; - - dai-link@1 { - sound-dai = <&toddr_a>; - }; - - dai-link@2 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - dai-tdm-slot-rx-mask-1 = <1 1>; - mclk-fs = <256>; - - codec@0 { - sound-dai = <&lineout>; - }; - - codec@1 { - sound-dai = <&speaker_amp1>; - }; - - codec@2 { - sound-dai = <&speaker_amp2>; - }; - - codec@3 { - sound-dai = <&linein>; - }; - - }; - - dai-link@3 { - sound-dai = <&spdifout>; - - codec { - sound-dai = <&spdif_dit>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml new file mode 100644 index 000000000000..bf1234550343 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic AXG sound card + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + const: amlogic,axg-sound-card + + audio-aux-devs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: list of auxiliary devices + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + audio-widgets: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list off component DAPM widget. Each entry is a pair of strings, + the first being the widget type, the second being the widget name + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + +patternProperties: + "^dai-link-[0-9]+$": + type: object + additionalProperties: false + description: + Container for dai-link level properties and the CODEC sub-nodes. + There should be at least one (and probably more) subnode of this type + + properties: + dai-format: + $ref: /schemas/types.yaml#/definitions/string + enum: [ i2s, left-j, dsp_a ] + + dai-tdm-slot-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of slots in use. If omitted, slot number is set to + accommodate the largest mask provided. + maximum: 32 + + dai-tdm-slot-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width in bits for each slot + enum: [ 8, 16, 20, 24, 32 ] + default: 32 + + mclk-fs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Multiplication factor between the frame rate and master clock + rate + + sound-dai: + maxItems: 1 + description: phandle of the CPU DAI + + patternProperties: + "^dai-tdm-slot-(t|r)x-mask-[0-3]$": + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + Transmit and receive cpu slot masks of each TDM lane + When omitted, mask is assumed to have to no slots. A valid + interface must have at least one slot, so at least one these + mask should be provided with an enabled slot. + + "^codec(-[0-9]+)?$": + type: object + additionalProperties: false + description: + dai-link representing backend links should have at least one subnode. + One subnode for each codec of the dai-link. dai-link representing + frontend links have no codec, therefore have no subnodes + + properties: + sound-dai: + maxItems: 1 + description: phandle of the codec DAI + + patternProperties: + "^dai-tdm-slot-(t|r)x-mask$": + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: Transmit and receive codec slot masks + + required: + - sound-dai + + required: + - sound-dai + +required: + - model + - dai-link-0 + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "amlogic,axg-sound-card"; + model = "AXG-S420"; + audio-aux-devs = <&tdmin_a>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right", + "Speaker", "Speaker2 Left", + "Speaker", "Speaker2 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker2 Left", "SPK2 OUT_A", + "Speaker1 Right", "SPK1 OUT_B", + "Speaker2 Right", "SPK2 OUT_B", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&toddr_a>; + }; + + dai-link-2 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&lineout>; + }; + + codec-1 { + sound-dai = <&speaker_amp1>; + }; + + codec-2 { + sound-dai = <&speaker_amp2>; + }; + + codec-3 { + sound-dai = <&linein>; + }; + }; + + dai-link-3 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt deleted file mode 100644 index df92a4ecf288..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Amlogic Audio SPDIF Input - -Required properties: -- compatible: 'amlogic,axg-spdifin' or - 'amlogic,g12a-spdifin' or - 'amlogic,sm1-spdifin' -- interrupts: interrupt specifier for the spdif input. -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "pclk" : peripheral clock. - * "refclk" : spdif input reference clock -- #sound-dai-cells: must be 0. - -Optional property: -- resets: phandle to the dedicated reset line of the spdif input. - -Example on the A113 SoC: - -spdifin: audio-controller@400 { - compatible = "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml new file mode 100644 index 000000000000..a0bd7a5fb9b3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Audio AXG SPDIF Input + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + oneOf: + - const: amlogic,axg-spdifin + - items: + - enum: + - amlogic,g12a-spdifin + - amlogic,sm1-spdifin + - const: amlogic,axg-spdifin + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: Peripheral clock + - description: SPDIF input reference clock + + clock-names: + items: + - const: pclk + - const: refclk + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#sound-dai-cells" + - clocks + - clock-names + - interrupts + +allOf: + - $ref: dai-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-spdifin + - amlogic,sm1-spdifin + then: + required: + - resets + + else: + properties: + resets: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x400 0x30>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt deleted file mode 100644 index 28381dd1f633..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Amlogic Audio SPDIF Output - -Required properties: -- compatible: 'amlogic,axg-spdifout' or - 'amlogic,g12a-spdifout' or - 'amlogic,sm1-spdifout' -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "pclk" : peripheral clock. - * "mclk" : master clock -- #sound-dai-cells: must be 0. - -Optional property: -- resets: phandle to the dedicated reset line of the spdif output. - -Example on the A113 SoC: - -spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml new file mode 100644 index 000000000000..15be8dae9398 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifout.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Audio AXG SPDIF Output + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + oneOf: + - const: amlogic,axg-spdifout + - items: + - enum: + - amlogic,g12a-spdifout + - amlogic,sm1-spdifout + - const: amlogic,axg-spdifout + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: Peripheral clock + - description: SPDIF output master clock + + clock-names: + items: + - const: pclk + - const: mclk + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#sound-dai-cells" + - clocks + - clock-names + +allOf: + - $ref: dai-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-spdifout + - amlogic,sm1-spdifout + then: + required: + - resets + + else: + properties: + resets: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + + audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x480 0x50>; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt deleted file mode 100644 index 5996c0cd89c2..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Amlogic Audio TDM formatters - -Required properties: -- compatible: 'amlogic,axg-tdmin' or - 'amlogic,axg-tdmout' or - 'amlogic,g12a-tdmin' or - 'amlogic,g12a-tdmout' or - 'amlogic,sm1-tdmin' or - 'amlogic,sm1-tdmout -- reg: physical base address of the controller and length of memory - mapped region. -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "pclk" : peripheral clock. - * "sclk" : bit clock. - * "sclk_sel" : bit clock input multiplexer. - * "lrclk" : sample clock - * "lrclk_sel": sample clock input multiplexer - -Optional property: -- resets: phandle to the dedicated reset line of the tdm formatter. - -Example of TDMOUT_A on the S905X2 SoC: - -tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml new file mode 100644 index 000000000000..719ca8fc98c7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Audio AXG TDM formatters + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + compatible: + enum: + - amlogic,g12a-tdmout + - amlogic,sm1-tdmout + - amlogic,axg-tdmout + - amlogic,g12a-tdmin + - amlogic,sm1-tdmin + - amlogic,axg-tdmin + + clocks: + items: + - description: Peripheral clock + - description: Bit clock + - description: Bit clock input multiplexer + - description: Sample clock + - description: Sample clock input multiplexer + + clock-names: + items: + - const: pclk + - const: sclk + - const: sclk_sel + - const: lrclk + - const: lrclk_sel + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - $ref: component-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,g12a-tdmin + - amlogic,sm1-tdmin + - amlogic,g12a-tdmout + - amlogic,sm1-tdmout + then: + required: + - resets + + else: + properties: + resets: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + + audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x500 0x40>; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt deleted file mode 100644 index cabfb26a5f22..000000000000 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic Audio TDM Interfaces - -Required properties: -- compatible: 'amlogic,axg-tdm-iface' -- clocks: list of clock phandle, one for each entry clock-names. -- clock-names: should contain the following: - * "sclk" : bit clock. - * "lrclk": sample clock - * "mclk" : master clock - -> optional if the interface is in clock slave mode. -- #sound-dai-cells: must be 0. - -Example of TDM_A on the A113 SoC: - -tdmif_a: audio-controller@0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; -}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml new file mode 100644 index 000000000000..320f0002649d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Audio TDM Interfaces + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: amlogic,axg-tdm-iface + + "#sound-dai-cells": + const: 0 + + clocks: + minItems: 2 + items: + - description: Bit clock + - description: Sample clock + - description: Master clock #optional + + clock-names: + minItems: 2 + items: + - const: sclk + - const: lrclk + - const: mclk + +required: + - compatible + - "#sound-dai-cells" + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/axg-audio-clkc.h> + + audio-controller { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>, + <&clkc_audio AUD_CLKID_MST_A_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index 5b8d59245f82..b358fd601ed3 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -62,7 +62,7 @@ patternProperties: description: phandle of the CPU DAI patternProperties: - "^codec-[0-9]+$": + "^codec(-[0-9]+)?$": type: object additionalProperties: false description: |- diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index f5b8b6d13077..6b4e02a0695a 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -11,32 +11,24 @@ maintainers: select: false -allOf: - - $ref: /schemas/graph.yaml#/$defs/port-base - -properties: - prefix: - description: "device name prefix" - $ref: /schemas/types.yaml#/definitions/string - convert-rate: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" - convert-channels: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" - convert-sample-format: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" +definitions: + port-base: + $ref: /schemas/graph.yaml#/$defs/port-base + properties: + convert-rate: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" + convert-channels: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + convert-sample-format: + $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + mclk-fs: + $ref: "simple-card.yaml#/definitions/mclk-fs" -patternProperties: - "^endpoint(@[0-9a-f]+)?": + endpoint-base: $ref: /schemas/graph.yaml#/$defs/endpoint-base - unevaluatedProperties: false - properties: mclk-fs: - description: | - Multiplication factor between stream rate and codec mclk. - When defined, mclk-fs property defined in dai-link sub nodes are - ignored. - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "simple-card.yaml#/definitions/mclk-fs" frame-inversion: description: dai-link uses frame clock inversion $ref: /schemas/types.yaml#/definitions/flag @@ -53,6 +45,15 @@ patternProperties: oneOf: - $ref: /schemas/types.yaml#/definitions/flag - $ref: /schemas/types.yaml#/definitions/phandle + clocks: + description: Indicates system clock + $ref: /schemas/types.yaml#/definitions/phandle + system-clock-frequency: + $ref: "simple-card.yaml#/definitions/system-clock-frequency" + system-clock-direction-out: + $ref: "simple-card.yaml#/definitions/system-clock-direction-out" + system-clock-fixed: + $ref: "simple-card.yaml#/definitions/system-clock-fixed" dai-format: description: audio format. @@ -100,4 +101,24 @@ patternProperties: minimum: 1 maximum: 64 + ports: + $ref: "#/definitions/port-base" + unevaluatedProperties: false + patternProperties: + "^port(@[0-9a-f]+)?$": + $ref: "#/definitions/port-base" + unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: "#/definitions/endpoint-base" + unevaluatedProperties: false + +allOf: + - $ref: "#/definitions/port-base" + +patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: "#/definitions/endpoint-base" + unevaluatedProperties: false + additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml new file mode 100644 index 000000000000..35eef7d818a2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/awinic,aw88395.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW88395 Smart Audio Amplifier + +maintainers: + - Weidong Wang <wangweidong.a@awinic.com> + +description: + The Awinic AW88395 is an I2S/TDM input, high efficiency + digital Smart K audio amplifier with an integrated 10.25V + smart boost convert. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: awinic,aw88395 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@34 { + compatible = "awinic,aw88395"; + reg = <0x34>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml index 82062d80d700..18fb471aa891 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml @@ -22,6 +22,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + '#sound-dai-cells': description: The first cell indicating the audio interface. @@ -42,7 +45,7 @@ properties: Configures the peak current by monitoring the current through the boost FET. Range starts at 1600 mA and goes to a maximum of 4500 mA with increments of 50 mA. See section 4.3.6 of the datasheet for details. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1600 maximum: 4500 default: 4500 @@ -51,7 +54,7 @@ properties: description: Boost inductor value, expressed in nH. Valid values include 1000, 1200, 1500 and 2200. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1000 maximum: 2200 @@ -60,7 +63,7 @@ properties: Total equivalent boost capacitance on the VBST and VAMP pins, derated at 11 volts DC. The value must be rounded to the nearest integer and expressed in uF. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 cirrus,asp-sdout-hiz: description: @@ -70,7 +73,7 @@ properties: 1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled 2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled 3 = Hi-Z during unused slots and while all transmit channels disabled - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 default: 2 @@ -84,7 +87,7 @@ properties: enable boost voltage. 0 = Internal Boost 1 = External Boost - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 @@ -109,7 +112,7 @@ properties: 1 = GPIO 2 = Sync 3 = MCLK input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 @@ -136,7 +139,7 @@ properties: 3 = MCLK input 4 = Push-pull INTB (active low) 5 = Push-pull INT (active high) - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 5 @@ -176,21 +179,23 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> + spi { #address-cells = <1>; #size-cells = <0>; - cs35l41: cs35l41@2 { - #sound-dai-cells = <1>; - compatible = "cirrus,cs35l41"; - reg = <2>; - VA-supply = <&dummy_vreg>; - VP-supply = <&dummy_vreg>; - reset-gpios = <&gpio 110 0>; - - cirrus,boost-type = <0>; - cirrus,boost-peak-milliamp = <4500>; - cirrus,boost-ind-nanohenry = <1000>; - cirrus,boost-cap-microfarad = <15>; + cs35l41: speaker-amp@2 { + #sound-dai-cells = <1>; + compatible = "cirrus,cs35l41"; + reg = <2>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; }; }; diff --git a/Documentation/devicetree/bindings/sound/component-common.yaml b/Documentation/devicetree/bindings/sound/component-common.yaml new file mode 100644 index 000000000000..37766c5f3974 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/component-common.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/component-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Audio Component Common Properties + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +properties: + sound-name-prefix: + $ref: /schemas/types.yaml#/definitions/string + description: | + Card implementing the routing property define the connection between + audio components as list of string pair. Component using the same + sink/source names may use this property to prepend the name of their + sinks/sources with the provided string. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/dai-common.yaml b/Documentation/devicetree/bindings/sound/dai-common.yaml index d858eea73ed7..1aed2f0f1775 100644 --- a/Documentation/devicetree/bindings/sound/dai-common.yaml +++ b/Documentation/devicetree/bindings/sound/dai-common.yaml @@ -9,15 +9,10 @@ title: Digital Audio Interface Common Properties maintainers: - Jerome Brunet <jbrunet@baylibre.com> -properties: - sound-name-prefix: - $ref: /schemas/types.yaml#/definitions/string - description: | - Card implementing the routing property define the connection between - audio components as list of string pair. Component using the same - sink/source names may use this property to prepend the name of their - sinks/sources with the provided string. +allOf: + - $ref: component-common.yaml# +properties: '#sound-dai-cells': true additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml index 7e56337d8edc..088c26b001cc 100644 --- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml @@ -76,10 +76,14 @@ properties: minItems: 4 dmas: - maxItems: 2 + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX dma-names: - maxItems: 2 + items: + - const: rx + - const: tx interrupts: items: @@ -143,31 +147,6 @@ properties: allOf: - $ref: dai-common.yaml# - if: - properties: - compatible: - contains: - const: fsl,vf610-sai - then: - properties: - dmas: - items: - - description: DMA controller phandle and request line for TX - - description: DMA controller phandle and request line for RX - dma-names: - items: - - const: tx - - const: rx - else: - properties: - dmas: - items: - - description: DMA controller phandle and request line for RX - - description: DMA controller phandle and request line for TX - dma-names: - items: - - const: rx - - const: tx - - if: required: - fsl,sai-asynchronous then: @@ -199,9 +178,8 @@ examples: <&clks VF610_CLK_SAI2>, <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 0 21>, - <&edma0 0 20>; + dma-names = "rx", "tx"; + dmas = <&edma0 0 20>, <&edma0 0 21>; big-endian; lsb-first; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 223b8ea693dc..799b362ba498 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -21,6 +21,7 @@ properties: compatible: enum: - fsl,imx8mp-xcvr + - fsl,imx93-xcvr reg: items: diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml index 869b40363af8..0b1a01a4c14e 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml @@ -75,6 +75,18 @@ patternProperties: additionalProperties: false + platform: + description: Holds subnode which includes the phandle of q6apm platform device. + type: object + properties: + sound-dai: + maxItems: 1 + + required: + - sound-dai + + additionalProperties: false + required: - link-name - cpu diff --git a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml new file mode 100644 index 000000000000..66993d378aaf --- /dev/null +++ b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/infineon,peb2466.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon PEB2466 codec + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: | + The Infineon PEB2466 codec is a programmable DSP-based four channels codec + with filters capabilities. + + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the sound card node for sub-nodes + that involve the codec. The codec uses one 8bit time-slot per channel. + 'dai-tdm-tdm-slot-with' must be set to 8. + + The PEB2466 codec also supports 28 gpios (signaling pins). + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - $ref: dai-common.yaml# + +properties: + compatible: + const: infineon,peb2466 + + reg: + description: + SPI device address. + maxItems: 1 + + clocks: + items: + - description: Master clock + + clock-names: + items: + - const: mclk + + spi-max-frequency: + maximum: 8192000 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Filters coefficients file to load. If this property is omitted, internal + filters are disabled. + + '#sound-dai-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - '#sound-dai-cells' + - gpio-controller + - '#gpio-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@0 { + compatible = "infineon,peb2466"; + reg = <0>; + spi-max-frequency = <8192000>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml new file mode 100644 index 000000000000..b36c35e5da1a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/irondevice,sma1303.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Iron Device SMA1303 Audio Amplifier + +maintainers: + - Kiseok Jo <kiseok.jo@irondevice.com> + +description: + SMA1303 digital class-D audio amplifier + with an integrated boost converter. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - irondevice,sma1303 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + amplifier@1e { + compatible = "irondevice,sma1303"; + reg = <0x1e>; + #sound-dai-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt deleted file mode 100644 index 39d640294c62..000000000000 --- a/Documentation/devicetree/bindings/sound/max98090.txt +++ /dev/null @@ -1,59 +0,0 @@ -MAX98090 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : "maxim,max98090" or "maxim,max98091". - -- reg : The I2C address of the device. - -- interrupts : The CODEC's interrupt output. - -Optional properties: - -- clocks: The phandle of the master clock to the CODEC - -- clock-names: Should be "mclk" - -- #sound-dai-cells : should be 0. - -- maxim,dmic-freq: Frequency at which to clock DMIC - -- maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are: - 0 - 2.2v - 1 - 2.55v - 2 - 2.4v - 3 - 2.8v - -Pins on the device (for linking into audio routes): - - * MIC1 - * MIC2 - * DMICL - * DMICR - * IN1 - * IN2 - * IN3 - * IN4 - * IN5 - * IN6 - * IN12 - * IN34 - * IN56 - * HPL - * HPR - * SPKL - * SPKR - * RCVL - * RCVR - * MICBIAS - -Example: - -audio-codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/sound/max98095.txt b/Documentation/devicetree/bindings/sound/max98095.txt deleted file mode 100644 index 318a4c82f17f..000000000000 --- a/Documentation/devicetree/bindings/sound/max98095.txt +++ /dev/null @@ -1,22 +0,0 @@ -MAX98095 audio CODEC - -This device supports I2C only. - -Required properties: - -- compatible : "maxim,max98095". - -- reg : The I2C address of the device. - -Optional properties: - -- clocks: The phandle of the master clock to the CODEC - -- clock-names: Should be "mclk" - -Example: - -max98095: codec@11 { - compatible = "maxim,max98095"; - reg = <0x11>; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml new file mode 100644 index 000000000000..65e4c516912f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98090.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98090/MAX98091 audio codecs + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + Pins on the device (for linking into audio routes): + MIC1, MIC2, DMICL, DMICR, IN1, IN2, IN3, IN4, IN5, IN6, IN12, IN34, IN56, + HPL, HPR, SPKL, SPKR, RCVL, RCVR, MICBIAS + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - maxim,max98090 + - maxim,max98091 + + reg: + maxItems: 1 + + clocks: + items: + - description: master clock + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + + maxim,dmic-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2500000 + description: + DMIC clock frequency + + maxim,micbias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + default: 3 + description: | + Micbias voltage applied to the analog mic, valid voltages value are: + 0 - 2.2v + 1 - 2.55v + 2 - 2.4v + 3 - 2.8v + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + clocks = <&i2s0 0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml new file mode 100644 index 000000000000..77544a9e1587 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98095.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98095 audio codec + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - maxim,max98095 + + reg: + maxItems: 1 + + clocks: + items: + - description: master clock + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + clocks = <&i2s0 0>; + clock-names = "mclk"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml new file mode 100644 index 000000000000..82ccb32f08f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8188-afe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AFE PCM controller for mt8188 + +maintainers: + - Trevor Wu <trevor.wu@mediatek.com> + +properties: + compatible: + const: mediatek,mt8188-afe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: audiosys + + mediatek,topckgen: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the mediatek topckgen controller + + power-domains: + maxItems: 1 + + clocks: + items: + - description: 26M clock + - description: audio pll1 clock + - description: audio pll2 clock + - description: clock divider for i2si1_mck + - description: clock divider for i2si2_mck + - description: clock divider for i2so1_mck + - description: clock divider for i2so2_mck + - description: clock divider for dptx_mck + - description: a1sys hoping clock + - description: audio intbus clock + - description: audio hires clock + - description: audio local bus clock + - description: mux for dptx_mck + - description: mux for i2so1_mck + - description: mux for i2so2_mck + - description: mux for i2si1_mck + - description: mux for i2si2_mck + - description: audio 26m clock + + clock-names: + items: + - const: clk26m + - const: apll1 + - const: apll2 + - const: apll12_div0 + - const: apll12_div1 + - const: apll12_div2 + - const: apll12_div3 + - const: apll12_div9 + - const: a1sys_hp_sel + - const: aud_intbus_sel + - const: audio_h_sel + - const: audio_local_bus_sel + - const: dptx_m_sel + - const: i2so1_m_sel + - const: i2so2_m_sel + - const: i2si1_m_sel + - const: i2si2_m_sel + - const: adsp_audio_26m + + mediatek,etdm-in1-cowork-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + etdm modules can share the same external clock pin. Specify + which etdm clock source is required by this etdm in module. + enum: + - 1 # etdm2_in + - 2 # etdm1_out + - 3 # etdm2_out + + mediatek,etdm-in2-cowork-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + etdm modules can share the same external clock pin. Specify + which etdm clock source is required by this etdm in module. + enum: + - 0 # etdm1_in + - 2 # etdm1_out + - 3 # etdm2_out + + mediatek,etdm-out1-cowork-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + etdm modules can share the same external clock pin. Specify + which etdm clock source is required by this etdm out module. + enum: + - 0 # etdm1_in + - 1 # etdm2_in + - 3 # etdm2_out + + mediatek,etdm-out2-cowork-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + etdm modules can share the same external clock pin. Specify + which etdm clock source is required by this etdm out module. + enum: + - 0 # etdm1_in + - 1 # etdm2_in + - 2 # etdm1_out + +patternProperties: + "^mediatek,etdm-in[1-2]-chn-disabled$": + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 16 + description: + This is a list of channel IDs which should be disabled. + By default, all data received from ETDM pins will be outputed to + memory. etdm in supports disable_out in direct mode(w/o interconn), + so user can disable the specified channels by the property. + uniqueItems: true + items: + minimum: 0 + maximum: 15 + + "^mediatek,etdm-in[1-2]-multi-pin-mode$": + type: boolean + description: if present, the etdm data mode is I2S. + + "^mediatek,etdm-out[1-3]-multi-pin-mode$": + type: boolean + description: if present, the etdm data mode is I2S. + +required: + - compatible + - reg + - interrupts + - resets + - reset-names + - mediatek,topckgen + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + afe@10b10000 { + compatible = "mediatek,mt8188-afe"; + reg = <0x10b10000 0x10000>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&watchdog 14>; + reset-names = "audiosys"; + mediatek,topckgen = <&topckgen>; + power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO + mediatek,etdm-in2-cowork-source = <2>; + mediatek,etdm-out2-cowork-source = <0>; + mediatek,etdm-in1-multi-pin-mode; + mediatek,etdm-in1-chn-disabled = /bits/ 8 <0x0 0x2>; + clocks = <&clk26m>, + <&apmixedsys 9>, //CLK_APMIXED_APLL1 + <&apmixedsys 10>, //CLK_APMIXED_APLL2 + <&topckgen 186>, //CLK_TOP_APLL12_CK_DIV0 + <&topckgen 187>, //CLK_TOP_APLL12_CK_DIV1 + <&topckgen 188>, //CLK_TOP_APLL12_CK_DIV2 + <&topckgen 189>, //CLK_TOP_APLL12_CK_DIV3 + <&topckgen 191>, //CLK_TOP_APLL12_CK_DIV9 + <&topckgen 83>, //CLK_TOP_A1SYS_HP + <&topckgen 31>, //CLK_TOP_AUD_INTBUS + <&topckgen 32>, //CLK_TOP_AUDIO_H + <&topckgen 69>, //CLK_TOP_AUDIO_LOCAL_BUS + <&topckgen 81>, //CLK_TOP_DPTX + <&topckgen 77>, //CLK_TOP_I2SO1 + <&topckgen 78>, //CLK_TOP_I2SO2 + <&topckgen 79>, //CLK_TOP_I2SI1 + <&topckgen 80>, //CLK_TOP_I2SI2 + <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M + clock-names = "clk26m", + "apll1", + "apll2", + "apll12_div0", + "apll12_div1", + "apll12_div2", + "apll12_div3", + "apll12_div9", + "a1sys_hp_sel", + "aud_intbus_sel", + "audio_h_sel", + "audio_local_bus_sel", + "dptx_m_sel", + "i2so1_m_sel", + "i2so2_m_sel", + "i2si1_m_sel", + "i2si2_m_sel", + "adsp_audio_26m"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml new file mode 100644 index 000000000000..6640272b3f4f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8188-mt6359.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8188 ASoC sound card + +maintainers: + - Trevor Wu <trevor.wu@mediatek.com> + +properties: + compatible: + const: mediatek,mt8188-mt6359-evb + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + sink/source pair of strings. Valid names could be the input or output + widgets of audio components, power supplies, MicBias of codec and the + software switch. + + mediatek,platform: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8188 ASoC platform. + +patternProperties: + "^dai-link-[0-9]+$": + type: object + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: + This property corresponds to the name of the BE dai-link to which + we are going to update parameters in this node. + items: + enum: + - ADDA_BE + - DPTX_BE + - ETDM1_IN_BE + - ETDM2_IN_BE + - ETDM1_OUT_BE + - ETDM2_OUT_BE + - ETDM3_OUT_BE + - PCM1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + additionalProperties: false + + required: + - link-name + - codec + +additionalProperties: false + +required: + - compatible + - mediatek,platform + +examples: + - | + sound { + compatible = "mediatek,mt8188-mt6359-evb"; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R", + "AIN1", "Headset Mic"; + dai-link-0 { + link-name = "ETDM3_OUT_BE"; + + codec { + sound-dai = <&hdmi0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml index 621022872c8d..651f61c7c25a 100644 --- a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml# +$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip I2S Multi-Channel Controller diff --git a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml index c37b89d94c12..c4cf1e5ab84b 100644 --- a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/microchip,pdmc.yaml# +$id: http://devicetree.org/schemas/sound/microchip,sama7g5-pdmc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Pulse Density Microphone Controller diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml index 70a47c6823b1..2f43c684ab88 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml# +$id: http://devicetree.org/schemas/sound/microchip,sama7g5-spdifrx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip S/PDIF Rx Controller diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml index c383162140bb..4702c528700d 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/mchp,spdiftx.yaml# +$id: http://devicetree.org/schemas/sound/microchip,sama7g5-spdiftx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip S/PDIF Tx Controller diff --git a/Documentation/devicetree/bindings/sound/nau8822.txt b/Documentation/devicetree/bindings/sound/nau8822.txt deleted file mode 100644 index a471d162d4e5..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8822.txt +++ /dev/null @@ -1,16 +0,0 @@ -NAU8822 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "nuvoton,nau8822" - - - reg : the I2C address of the device. - -Example: - -codec: nau8822@1a { - compatible = "nuvoton,nau8822"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml new file mode 100644 index 000000000000..65105402a53d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8822.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8822 audio CODEC + +description: | + 24 bit stereo audio codec with speaker driver. + This device supports I2C/SPI. + +maintainers: + - David Lin <CTLIN0@nuvoton.com> + +properties: + compatible: + enum: + - nuvoton,nau8822 + + reg: + maxItems: 1 + + nuvoton,spk-btl: + description: + If set, configure the two loudspeaker outputs as a Bridge Tied Load output + to drive a high power external loudspeaker. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index bb42220916b3..6cc8f86c7531 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -35,7 +35,7 @@ properties: clocks: minItems: 3 - maxItems: 7 + maxItems: 10 clock-names: minItems: 1 @@ -65,6 +65,9 @@ properties: power-domain-names: maxItems: 1 + required-opps: + maxItems: 1 + '#sound-dai-cells': const: 1 @@ -75,7 +78,7 @@ properties: const: 0 patternProperties: - "^dai-link@[0-9a-f]$": + "^dai-link@[0-9a-f]+$": type: object description: | LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node @@ -121,6 +124,8 @@ allOf: then: properties: + clocks: + maxItems: 3 clock-names: items: - const: ahbix-clk @@ -135,6 +140,9 @@ allOf: then: properties: + clocks: + minItems: 7 + maxItems: 7 clock-names: items: - const: ahbix-clk @@ -153,33 +161,31 @@ allOf: then: properties: + clocks: + minItems: 6 + maxItems: 6 clock-names: - oneOf: - - items: #for I2S - - const: pcnoc-sway-clk - - const: audio-core - - const: mclk0 - - const: pcnoc-mport-clk - - const: mi2s-bit-clk0 - - const: mi2s-bit-clk1 - - items: #for HDMI - - const: pcnoc-sway-clk - - const: audio-core - - const: pcnoc-mport-clk + items: + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + reg: + minItems: 2 + maxItems: 2 reg-names: - anyOf: - - items: #for I2S - - const: lpass-lpaif - - items: #for I2S and HDMI - - const: lpass-hdmiif - - const: lpass-lpaif + items: + - const: lpass-hdmiif + - const: lpass-lpaif + interrupts: + minItems: 2 + maxItems: 2 interrupt-names: - anyOf: - - items: #for I2S - - const: lpass-irq-lpaif - - items: #for I2S and HDMI - - const: lpass-irq-lpaif - - const: lpass-irq-hdmi + items: + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi required: - iommus - power-domains @@ -192,54 +198,44 @@ allOf: then: properties: + clocks: + minItems: 10 + maxItems: 10 clock-names: - oneOf: - - items: #for I2S - - const: aon_cc_audio_hm_h - - const: audio_cc_ext_mclk0 - - const: core_cc_sysnoc_mport_core - - const: core_cc_ext_if0_ibit - - const: core_cc_ext_if1_ibit - - items: #for Soundwire - - const: aon_cc_audio_hm_h - - const: audio_cc_codec_mem - - const: audio_cc_codec_mem0 - - const: audio_cc_codec_mem1 - - const: audio_cc_codec_mem2 - - const: aon_cc_va_mem0 - - items: #for HDMI - - const: core_cc_sysnoc_mport_core - + items: + - const: aon_cc_audio_hm_h + - const: audio_cc_ext_mclk0 + - const: core_cc_sysnoc_mport_core + - const: core_cc_ext_if0_ibit + - const: core_cc_ext_if1_ibit + - const: audio_cc_codec_mem + - const: audio_cc_codec_mem0 + - const: audio_cc_codec_mem1 + - const: audio_cc_codec_mem2 + - const: aon_cc_va_mem0 + reg: + minItems: 6 + maxItems: 6 reg-names: - anyOf: - - items: #for I2S - - const: lpass-lpaif - - items: #for I2S and HDMI - - const: lpass-hdmiif - - const: lpass-lpaif - - items: #for I2S, soundwire and HDMI - - const: lpass-hdmiif - - const: lpass-lpaif - - const: lpass-rxtx-cdc-dma-lpm - - const: lpass-rxtx-lpaif - - const: lpass-va-lpaif - - const: lpass-va-cdc-dma-lpm + items: + - const: lpass-hdmiif + - const: lpass-lpaif + - const: lpass-rxtx-cdc-dma-lpm + - const: lpass-rxtx-lpaif + - const: lpass-va-lpaif + - const: lpass-va-cdc-dma-lpm + interrupts: + minItems: 4 + maxItems: 4 interrupt-names: - anyOf: - - items: #for I2S - - const: lpass-irq-lpaif - - items: #for I2S and HDMI - - const: lpass-irq-lpaif - - const: lpass-irq-hdmi - - items: #for I2S, soundwire and HDMI - - const: lpass-irq-lpaif - - const: lpass-irq-hdmi - - const: lpass-irq-vaif - - const: lpass-irq-rxtxif + items: + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi + - const: lpass-irq-vaif + - const: lpass-irq-rxtxif power-domain-names: - allOf: - - items: - - const: lcx + items: + - const: lcx required: - iommus diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 26f0343b5aac..0a3c688ef1ec 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -36,7 +36,7 @@ properties: oneOf: - items: #for ADSP based platforms - const: mclk - - const: core + - const: macro - const: dcodec - items: #for ADSP bypass based platforms - const: mclk @@ -77,7 +77,7 @@ examples: clocks = <&aoncc 0>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "mclk", "core", "dcodec"; + clock-names = "mclk", "macro", "dcodec"; clock-output-names = "fsgen"; qcom,dmic-sample-rate = <600000>; vdd-micb-supply = <&vreg_s4a_1p8>; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index a53c9ef938fa..cdbb4096fa44 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -17,7 +17,8 @@ properties: const: qcom,q6apm-dais iommus: - maxItems: 1 + minItems: 1 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 70080d04ddc9..262de7a60a73 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -15,16 +15,20 @@ description: properties: compatible: - enum: - - lenovo,yoga-c630-sndcard - - qcom,apq8016-sbc-sndcard - - qcom,db845c-sndcard - - qcom,msm8916-qdsp6-sndcard - - qcom,qrb5165-rb5-sndcard - - qcom,sc8280xp-sndcard - - qcom,sdm845-sndcard - - qcom,sm8250-sndcard - - qcom,sm8450-sndcard + oneOf: + - items: + - enum: + - lenovo,yoga-c630-sndcard + - qcom,db845c-sndcard + - const: qcom,sdm845-sndcard + - enum: + - qcom,apq8016-sbc-sndcard + - qcom,msm8916-qdsp6-sndcard + - qcom,qrb5165-rb5-sndcard + - qcom,sc8280xp-sndcard + - qcom,sdm845-sndcard + - qcom,sm8250-sndcard + - qcom,sm8450-sndcard audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index 184e8ccbdd13..ea09590bfa30 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -28,7 +28,9 @@ properties: description: GPIO spec for reset line to use maxItems: 1 - slim-ifc-dev: true + slim-ifc-dev: + description: IFC device interface + $ref: /schemas/types.yaml#/definitions/phandle clocks: maxItems: 1 @@ -147,21 +149,49 @@ patternProperties: required: - compatible - reg - - reset-gpios - - slim-ifc-dev - - interrupts - - interrupt-controller - - clock-frequency - - clock-output-names - - qcom,micbias1-microvolt - - qcom,micbias2-microvolt - - qcom,micbias3-microvolt - - qcom,micbias4-microvolt - - "#interrupt-cells" - - "#clock-cells" - - "#sound-dai-cells" - - "#address-cells" - - "#size-cells" + +allOf: + - if: + required: + - slim-ifc-dev + then: + required: + - reset-gpios + - slim-ifc-dev + - interrupt-controller + - clock-frequency + - clock-output-names + - qcom,micbias1-microvolt + - qcom,micbias2-microvolt + - qcom,micbias3-microvolt + - qcom,micbias4-microvolt + - "#interrupt-cells" + - "#clock-cells" + - "#sound-dai-cells" + - "#address-cells" + - "#size-cells" + oneOf: + - required: + - interrupts-extended + - required: + - interrupts + else: + properties: + reset-gpios: false + slim-ifc-dev: false + interrupts: false + interrupt-controller: false + clock-frequency: false + clock-output-names: false + qcom,micbias1-microvolt: false + qcom,micbias2-microvolt: false + qcom,micbias3-microvolt: false + qcom,micbias4-microvolt: false + "#interrupt-cells": false + "#clock-cells": false + "#sound-dai-cells": false + "#address-cells": false + "#size-cells": false additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml index d702b489320f..ac03672ebf6d 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml @@ -15,6 +15,9 @@ description: | Their primary operating mode uses a SoundWire digital audio interface. This binding is for SoundWire interface. +allOf: + - $ref: dai-common.yaml# + properties: compatible: const: sdw10217201000 @@ -39,7 +42,7 @@ required: - "#thermal-sensor-cells" - "#sound-dai-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml new file mode 100644 index 000000000000..a2b92dba5529 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/renesas,idt821034.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas IDT821034 codec device + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: | + The IDT821034 codec is a four channel PCM codec with onchip filters and + programmable gain setting. + + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the ALSA sound card node for + sub-nodes that involve the codec. The codec uses one 8bit time-slot per + channel. + 'dai-tdm-tdm-slot-with' must be set to 8. + + The IDT821034 codec also supports 5 gpios (SLIC signals) per channel. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - $ref: dai-common.yaml# + +properties: + compatible: + const: renesas,idt821034 + + reg: + description: + SPI device address. + maxItems: 1 + + spi-max-frequency: + maximum: 8192000 + + spi-cpha: true + + '#sound-dai-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - spi-cpha + - '#sound-dai-cells' + - gpio-controller + - '#gpio-cells' + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@0 { + compatible = "renesas,idt821034"; + reg = <0>; + spi-max-frequency = <8192000>; + spi-cpha; + #sound-dai-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index cb90463c7297..12ccf29338d9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -18,8 +18,7 @@ properties: - enum: - renesas,rcar_sound-r8a7778 # R-Car M1A - renesas,rcar_sound-r8a7779 # R-Car H1 - - enum: - - renesas,rcar_sound-gen1 + - const: renesas,rcar_sound-gen1 # for Gen2 SoC - items: - enum: @@ -32,8 +31,7 @@ properties: - renesas,rcar_sound-r8a7791 # R-Car M2-W - renesas,rcar_sound-r8a7793 # R-Car M2-N - renesas,rcar_sound-r8a7794 # R-Car E2 - - enum: - - renesas,rcar_sound-gen2 + - const: renesas,rcar_sound-gen2 # for Gen3 SoC - items: - enum: @@ -47,14 +45,16 @@ properties: - renesas,rcar_sound-r8a77965 # R-Car M3-N - renesas,rcar_sound-r8a77990 # R-Car E3 - renesas,rcar_sound-r8a77995 # R-Car D3 - - enum: - - renesas,rcar_sound-gen3 - # for Generic + - const: renesas,rcar_sound-gen3 + # for Gen4 SoC - items: - - enum: - - renesas,rcar_sound-gen1 - - renesas,rcar_sound-gen2 - - renesas,rcar_sound-gen3 + - const: renesas,rcar_sound-r8a779g0 # R-Car V4H + - const: renesas,rcar_sound-gen4 + # for Generic + - enum: + - renesas,rcar_sound-gen1 + - renesas,rcar_sound-gen2 + - renesas,rcar_sound-gen3 reg: minItems: 1 @@ -68,6 +68,7 @@ properties: description: | it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAIs + This is used on simple-audio-card enum: [0, 1] "#clock-cells": @@ -113,15 +114,34 @@ properties: - pattern: '^clk_(a|b|c|i)$' ports: - $ref: /schemas/graph.yaml#/properties/ports + $ref: audio-graph-port.yaml#/definitions/port-base + unevaluatedProperties: false patternProperties: '^port(@[0-9a-f]+)?$': - $ref: audio-graph-port.yaml# + $ref: audio-graph-port.yaml#/definitions/port-base unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: audio-graph-port.yaml#/definitions/endpoint-base + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + unevaluatedProperties: false port: - $ref: audio-graph-port.yaml# + $ref: audio-graph-port.yaml#/definitions/port-base unevaluatedProperties: false + patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: audio-graph-port.yaml#/definitions/endpoint-base + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + unevaluatedProperties: false rcar_sound,dvc: description: DVC subnode. @@ -178,10 +198,6 @@ properties: enum: - tx - rx - required: - - interrupts - - dmas - - dma-names additionalProperties: false rcar_sound,ssiu: @@ -240,8 +256,6 @@ properties: $ref: /schemas/types.yaml#/definitions/flag required: - interrupts - - dmas - - dma-names additionalProperties: false # For DAI base @@ -271,7 +285,6 @@ required: - reg-names - clocks - clock-names - - "#sound-dai-cells" allOf: - $ref: dai-common.yaml# @@ -285,7 +298,6 @@ allOf: reg: maxItems: 3 reg-names: - maxItems: 3 items: enum: - scu @@ -294,9 +306,8 @@ allOf: else: properties: reg: - maxItems: 5 + minItems: 5 reg-names: - maxItems: 5 items: enum: - scu diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index ff1228713f7e..0c398581d52b 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -20,6 +20,9 @@ Optional properties: - realtek,in3-differential Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended. +- realtek,lout-differential + Boolean. Indicate LOUT output is differential, rather than stereo. + - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. - realtek,dmic1-data-pin diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index 7b4e08ddef6a..7774543b8819 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -43,9 +43,10 @@ properties: type: object properties: sound-dai: + minItems: 1 items: - - description: phandle of the MAX98090 CODEC - description: phandle of the HDMI IP block node + - description: phandle of the MAX98090 CODEC samsung,audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 8d5dcf9cd43e..30b3b6e9824b 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -37,12 +37,20 @@ properties: samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports stereo channels. Exynos7 I2S1 upgraded to 5.1 multichannel with slightly modified bit offsets. + + tesla,fsd-i2s: for 8/16/24bit stereo channel I2S for playback and + capture, secondary FIFO using external DMA, s/w reset control, + internal mux for root clock source with all root clock sampling + frequencies supported by Exynos7 I2S and 7.1 channel TDM support + for playback and capture TDM (Time division multiplexing) to allow + transfer of multiple channel audio data on single data line. enum: - samsung,s3c6410-i2s - samsung,s5pv210-i2s - samsung,exynos5420-i2s - samsung,exynos7-i2s - samsung,exynos7-i2s1 + - tesla,fsd-i2s '#address-cells': const: 1 @@ -67,9 +75,6 @@ properties: - const: rx - const: tx-sec - assigned-clock-parents: true - assigned-clocks: true - clocks: minItems: 1 maxItems: 3 diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index ed19899bc94b..f0d81bfe2598 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -205,6 +205,8 @@ patternProperties: $ref: "#/definitions/dai" "^simple-audio-card,codec(@[0-9a-f]+)?$": $ref: "#/definitions/dai" + "^simple-audio-card,plat(@[0-9a-f]+)?$": + $ref: "#/definitions/dai" "^simple-audio-card,dai-link(@[0-9a-f]+)?$": description: | @@ -215,6 +217,10 @@ patternProperties: reg: maxItems: 1 + "#address-cells": + const: 1 + "#size-cells": + const: 0 # common properties frame-master: $ref: "#/definitions/frame-master" @@ -244,9 +250,9 @@ patternProperties: maxItems: 1 patternProperties: - "^cpu(@[0-9a-f]+)?": + "^cpu(-[0-9]+)?$": $ref: "#/definitions/dai" - "^codec(@[0-9a-f]+)?": + "^codec(-[0-9]+)?$": $ref: "#/definitions/dai" additionalProperties: false @@ -462,16 +468,16 @@ examples: convert-channels = <8>; /* TDM Split */ - sndcpu1: cpu0 { + sndcpu1: cpu-0 { sound-dai = <&rcar_sound 1>; }; - cpu1 { + cpu-1 { sound-dai = <&rcar_sound 2>; }; - cpu2 { + cpu-2 { sound-dai = <&rcar_sound 3>; }; - cpu3 { + cpu-3 { sound-dai = <&rcar_sound 4>; }; codec { diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt index df99ca9451b0..7d851ae2bba2 100644 --- a/Documentation/devicetree/bindings/sound/tas5720.txt +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -6,11 +6,13 @@ audio playback. For more product information please see the links below: https://www.ti.com/product/TAS5720L https://www.ti.com/product/TAS5720M +https://www.ti.com/product/TAS5720A-Q1 https://www.ti.com/product/TAS5722L Required properties: - compatible : "ti,tas5720", + "ti,tas5720a-q1", "ti,tas5722" - reg : I2C slave address - dvdd-supply : phandle to a 3.3-V supply for the digital circuitry diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt deleted file mode 100644 index a02ecaab5183..000000000000 --- a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt +++ /dev/null @@ -1,56 +0,0 @@ -Texas Instruments pcm3168a DT bindings - -This driver supports both SPI and I2C bus access for this codec - -Required properties: - - - compatible: "ti,pcm3168a" - - - clocks : Contains an entry for each entry in clock-names - - - clock-names : Includes the following entries: - "scki" The system clock - - - VDD1-supply : Digital power supply regulator 1 (+3.3V) - - - VDD2-supply : Digital power supply regulator 2 (+3.3V) - - - VCCAD1-supply : ADC power supply regulator 1 (+5V) - - - VCCAD2-supply : ADC power supply regulator 2 (+5V) - - - VCCDA1-supply : DAC power supply regulator 1 (+5V) - - - VCCDA2-supply : DAC power supply regulator 2 (+5V) - -For required properties on SPI/I2C, consult SPI/I2C device tree documentation - -Optional properties: - - - reset-gpios : Optional reset gpio line connected to RST pin of the codec. - The RST line is low active: - RST = low: device power-down - RST = high: device is enabled - -Examples: - -i2c0: i2c0@0 { - - ... - - pcm3168a: audio-codec@44 { - compatible = "ti,pcm3168a"; - reg = <0x44>; - reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - clocks = <&clk_core CLK_AUDIO>; - clock-names = "scki"; - VDD1-supply = <&supply3v3>; - VDD2-supply = <&supply3v3>; - VCCAD1-supply = <&supply5v0>; - VCCAD2-supply = <&supply5v0>; - VCCDA1-supply = <&supply5v0>; - VCCDA2-supply = <&supply5v0>; - pinctrl-names = "default"; - pinctrl-0 = <&dac_clk_pin>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml new file mode 100644 index 000000000000..b6a4360ab845 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm3168a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM3168A Audio Codec + +maintainers: + - Damien Horsley <Damien.Horsley@imgtec.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + +description: + The Texas Instruments PCM3168A is a 24-bit Multi-channel Audio CODEC with + 96/192kHz sampling rate, supporting both SPI and I2C bus access. + +properties: + compatible: + const: ti,pcm3168a + + reg: + maxItems: 1 + + clocks: + items: + - description: System clock input + + clock-names: + items: + - const: scki + + reset-gpios: + items: + - description: | + GPIO line connected to the active-low RST pin of the codec. + RST = low: device power-down + RST = high: device is enabled + + "#sound-dai-cells": + enum: [0, 1] + + VDD1-supply: + description: Digital power supply regulator 1 (+3.3V) + + VDD2-supply: + description: Digital power supply regulator 2 (+3.3V) + + VCCAD1-supply: + description: ADC power supply regulator 1 (+5V) + + VCCAD2-supply: + description: ADC power supply regulator 2 (+5V) + + VCCDA1-supply: + description: DAC power supply regulator 1 (+5V) + + VCCDA2-supply: + description: DAC power supply regulator 2 (+5V) + + ports: + $ref: audio-graph-port.yaml#/definitions/port-base + properties: + port@0: + $ref: audio-graph-port.yaml# + description: Audio input port. + + port@1: + $ref: audio-graph-port.yaml# + description: Audio output port. + +required: + - compatible + - reg + - clocks + - clock-names + - VDD1-supply + - VDD2-supply + - VCCAD1-supply + - VCCAD2-supply + - VCCDA1-supply + - VCCDA2-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pcm3168a: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + clocks = <&clk_core 42>; + clock-names = "scki"; + VDD1-supply = <&supply3v3>; + VDD2-supply = <&supply3v3>; + VCCAD1-supply = <&supply5v0>; + VCCAD2-supply = <&supply5v0>; + VCCDA1-supply = <&supply5v0>; + VCCDA2-supply = <&supply5v0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml new file mode 100644 index 000000000000..e8ca9f3369f8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec + +description: | + TLV320AIC3x are a series of low-power stereo audio codecs with stereo + headphone amplifier, as well as multiple inputs and outputs programmable in + single-ended or fully differential configurations. + + The serial control bus supports SPI or I2C protocols, while the serial audio + data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. + + The following pins can be referred in the sound node's audio routing property: + + CODEC output pins: + LLOUT + RLOUT + MONO_LOUT + HPLOUT + HPROUT + HPLCOM + HPRCOM + + CODEC input pins for TLV320AIC3104: + MIC2L + MIC2R + LINE1L + LINE1R + + CODEC input pins for other compatible codecs: + MIC3L + MIC3R + LINE1L + LINE2L + LINE1R + LINE2R + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + gpio-reset: + maxItems: 1 + description: + Deprecated, please use reset-gpios instead. + deprecated: true + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + + clocks: + maxItems: 1 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: audio-codec@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: audio-codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + ai3x-ocmv = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; - ai3x-ocmv = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 5c3c6abb983b..85bb190cdd2f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -645,6 +645,8 @@ patternProperties: description: Inverse Path "^iom,.*": description: Iomega Corporation + "^irondevice,.*": + description: Iron Device Corporation "^isee,.*": description: ISEE 2007 S.L. "^isil,.*": |