diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 22:05:56 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-22 22:05:56 +0300 |
| commit | d5176cdbf64ce7d4eebf339205f17c23118e9f72 (patch) | |
| tree | 188bbda7ab47c4503d101eafb98264b4a13165bc /Documentation/devicetree | |
| parent | 17bbc46fc9d5128756dc9f36063836eaede06b0b (diff) | |
| parent | 099f37a539e616f762241ab999495fb8aa2f5971 (diff) | |
| download | linux-d5176cdbf64ce7d4eebf339205f17c23118e9f72.tar.xz | |
Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
Diffstat (limited to 'Documentation/devicetree')
63 files changed, 3242 insertions, 429 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml index 6717f163390b..7ae084397258 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml @@ -1,13 +1,13 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX8MM IOMUX Controller +title: Freescale IMX8M IOMUX Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Peng Fan <peng.fan@nxp.com> description: Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory @@ -15,7 +15,11 @@ description: properties: compatible: - const: fsl,imx8mm-iomuxc + enum: + - fsl,imx8mm-iomuxc + - fsl,imx8mn-iomuxc + - fsl,imx8mp-iomuxc + - fsl,imx8mq-iomuxc reg: maxItems: 1 @@ -34,9 +38,10 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last - integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. + be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>. + The last integer CONFIG is the pad setting value like pull-up on this + pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for + detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: @@ -51,7 +56,8 @@ patternProperties: - description: | "input_val" indicates the select input value to be applied. - description: | - "pad_setting" indicates the pad configuration value to be applied. + "pad_setting" indicates the pad configuration value to be + applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml deleted file mode 100644 index b1cdbb56d4e4..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml +++ /dev/null @@ -1,84 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Freescale IMX8MN IOMUX Controller - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory - for common binding part and usage. - -properties: - compatible: - const: fsl,imx8mn-iomuxc - - reg: - maxItems: 1 - -# Client device subnode's properties -patternProperties: - 'grp$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - - properties: - fsl,pins: - description: - each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last - integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. - - required: - - fsl,pins - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - -additionalProperties: false - -examples: - # Pinmux controller node - - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mn-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_uart2: uart2grp { - fsl,pins = - <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, - <0x240 0x4A8 0x000 0x0 0x0 0x140>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml deleted file mode 100644 index 4eed3a4e153a..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ /dev/null @@ -1,84 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Freescale IMX8MP IOMUX Controller - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory - for common binding part and usage. - -properties: - compatible: - const: fsl,imx8mp-iomuxc - - reg: - maxItems: 1 - -# Client device subnode's properties -patternProperties: - 'grp$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - - properties: - fsl,pins: - description: - each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last - integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. - - required: - - fsl,pins - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - -additionalProperties: false - -examples: - # Pinmux controller node - - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mp-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_uart2: uart2grp { - fsl,pins = - <0x228 0x488 0x5F0 0x0 0x6 0x49>, - <0x228 0x488 0x000 0x0 0x0 0x49>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml deleted file mode 100644 index d4a8ea5551a5..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml +++ /dev/null @@ -1,84 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Freescale IMX8MQ IOMUX Controller - -maintainers: - - Anson Huang <Anson.Huang@nxp.com> - -description: - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory - for common binding part and usage. - -properties: - compatible: - const: fsl,imx8mq-iomuxc - - reg: - maxItems: 1 - -# Client device subnode's properties -patternProperties: - 'grp$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - - properties: - fsl,pins: - description: - each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last - integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. - - required: - - fsl,pins - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - -additionalProperties: false - -examples: - # Pinmux controller node - - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mq-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_uart1: uart1grp { - fsl,pins = - <0x234 0x49C 0x4F4 0x0 0x0 0x49>, - <0x238 0x4A0 0x4F4 0x0 0x0 0x49>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 1b44335b1e94..a55c8e4ff26e 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -70,11 +70,11 @@ allOf: - $ref: "pinctrl.yaml#" patternProperties: - '-[0-9]+$': + 'pins$': type: object additionalProperties: false patternProperties: - 'pins': + '(^pins|pins?$)': type: object additionalProperties: false description: | @@ -158,7 +158,7 @@ examples: <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - i2c0_pins_a: i2c0-0 { + i2c0_pins_a: i2c0-pins { pins1 { pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, <MT8135_PIN_101_SCL0__FUNC_SCL0>; @@ -166,7 +166,7 @@ examples: }; }; - i2c1_pins_a: i2c1-0 { + i2c1_pins_a: i2c1-pins { pins { pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, <MT8135_PIN_196_SCL1__FUNC_SCL1>; @@ -174,7 +174,7 @@ examples: }; }; - i2c2_pins_a: i2c2-0 { + i2c2_pins_a: i2c2-pins { pins1 { pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; bias-pull-down; @@ -186,7 +186,7 @@ examples: }; }; - i2c3_pins_a: i2c3-0 { + i2c3_pins_a: i2c3-pins { pins1 { pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index c9ea0cad489b..ac93eb8f01a6 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -61,11 +61,11 @@ then: - "#interrupt-cells" patternProperties: - '-[0-9]+$': + '-pins(-[a-z]+)?$': type: object additionalProperties: false patternProperties: - 'mux': + '^mux(-|$)': type: object additionalProperties: false description: | @@ -244,7 +244,7 @@ patternProperties: groups: enum: [wf0_2g, wf0_5g] - 'conf': + '^conf(-|$)': type: object additionalProperties: false description: | @@ -348,7 +348,7 @@ examples: gpio-controller; #gpio-cells = <2>; - pinctrl_eth_default: eth-0 { + pinctrl_eth_default: eth-pins { mux-mdio { groups = "mdc_mdio"; function = "eth"; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml new file mode 100644 index 000000000000..74c66fbcb2ae --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -0,0 +1,475 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7981-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7981 Pin Controller + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +description: + The MediaTek's MT7981 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7981-pinctrl + + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: gpio + - const: iocfg_rt + - const: iocfg_rm + - const: iocfg_rb + - const: iocfg_lb + - const: iocfg_bl + - const: iocfg_tm + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: > + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^.*mux.*$': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "wa_aice1" "wa_aice" 0, 1 + "wa_aice2" "wa_aice" 0, 1 + "wm_uart_0" "uart" 0, 1 + "dfd" "dfd" 0, 1, 4, 5 + "watchdog" "watchdog" 2 + "pcie_pereset" "pcie" 3 + "jtag" "jtag" 4, 5, 6, 7, 8 + "wm_jtag_0" "jtag" 4, 5, 6, 7, 8 + "wo0_jtag_0" "jtag" 9, 10, 11, 12, 13 + "uart2_0" "uart" 4, 5, 6, 7 + "gbe_led0" "led" 8 + "pta_ext_0" "pta" 4, 5, 6 + "pwm2" "pwm" 7 + "net_wo0_uart_txd_0" "uart" 8 + "spi1_0" "spi" 4, 5, 6, 7 + "i2c0_0" "i2c" 6, 7 + "dfd_ntrst" "dfd" 8 + "wm_aice1" "wa_aice" 9, 10 + "pwm0_0" "pwm" 13 + "pwm0_1" "pwm" 15 + "pwm1_0" "pwm" 14 + "pwm1_1" "pwm" 15 + "net_wo0_uart_txd_1" "uart" 14 + "net_wo0_uart_txd_2" "uart" 15 + "gbe_led1" "led" 13 + "pcm" "pcm" 9, 10, 11, 12, 13, 25 + "watchdog1" "watchdog" 13 + "udi" "udi" 9, 10, 11, 12, 13 + "drv_vbus" "usb" 14 + "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 + "snfi" "flash" 16, 17, 18, 19, 20, 21 + "spi0" "spi" 16, 17, 18, 19 + "spi0_wp_hold" "spi" 20, 21 + "spi1_1" "spi" 22, 23, 24, 25 + "spi2" "spi" 26, 27, 28, 29 + "spi2_wp_hold" "spi" 30, 31 + "uart1_0" "uart" 16, 17, 18, 19 + "uart1_1" "uart" 26, 27, 28, 29 + "uart2_1" "uart" 22, 23, 24, 25 + "pta_ext_1" "pta" 22, 23, 24 + "wm_aurt_1" "uart" 20, 21 + "wm_aurt_2" "uart" 30, 31 + "wm_jtag_1" "jtag" 20, 21, 22, 23, 24 + "wo0_jtag_1" "jtag" 25, 26, 27, 28, 29 + "wa_aice3" "wa_aice" 28, 20 + "wm_aice2" "wa_aice" 30, 31 + "i2c0_1" "i2c" 30, 31 + "u2_phy_i2c" "i2c" 30, 31 + "uart0" "uart" 32, 33 + "sgmii1_phy_i2c" "i2c" 32, 33 + "u3_phy_i2c" "i2c" 32, 33 + "sgmii0_phy_i2c" "i2c" 32, 33 + "pcie_clk" "pcie" 34 + "pcie_wake" "pcie" 35 + "i2c0_2" "i2c" 36, 37 + "smi_mdc_mdio" "eth" 36, 37 + "gbe_ext_mdc_mdio" "eth" 36, 37 + "wf0_mode1" "eth" 40, 41, 42, 43, 44, 45, 46, 47, 48, + 49, 50, 51, 52, 53, 54, 55, 56 + + "wf0_mode3" "eth" 45, 46, 47, 48, 49, 51 + "wf2g_led0" "led" 30 + "wf2g_led1" "led" 34 + "wf5g_led0" "led" 31 + "wf5g_led1" "led" 35 + "mt7531_int" "eth" 38 + "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22 + 23, 24, 25, 34, 35 + + $ref: /schemas/pinctrl/pinmux-node.yaml + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [wa_aice, dfd, jtag, pta, pcm, udi, usb, ant, eth, i2c, led, + pwm, spi, uart, watchdog, flash, pcie] + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: wa_aice + then: + properties: + groups: + enum: [wa_aice1, wa_aice2, wm_aice1_1, wa_aice3, wm_aice1_2] + - if: + properties: + function: + const: dfd + then: + properties: + groups: + enum: [dfd, dfd_ntrst] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag, wm_jtag_0, wo0_jtag_0, wo0_jtag_1, wm_jtag_1] + - if: + properties: + function: + const: pta + then: + properties: + groups: + enum: [pta_ext_0, pta_ext_1] + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [pcm] + - if: + properties: + function: + const: udi + then: + properties: + groups: + enum: [udi] + - if: + properties: + function: + const: usb + then: + properties: + groups: + enum: [drv_vbus] + - if: + properties: + function: + const: ant + then: + properties: + groups: + enum: [ant_sel] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [smi_mdc_mdio, gbe_ext_mdc_mdio, wf0_mode1, wf0_mode3, + mt7531_int] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c0_0, i2c0_1, u2_phy_i2c, sgmii1_phy_i2c, u3_phy_i2c, + sgmii0_phy_i2c, i2c0_2] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, wf5g_led1] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm2, pwm0_0, pwm0_1, pwm1_0, pwm1_1] + maxItems: 3 + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, spi2_wp_hold] + maxItems: 4 + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [wm_uart_0, uart2_0, net_wo0_uart_txd_0, + net_wo0_uart_txd_1, net_wo0_uart_txd_2, uart1_0, + uart1_1, uart2_1, wm_aurt_1, wm_aurt_2, uart0] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: flash + then: + properties: + groups: + items: + enum: [emmc_45, snfi] + maxItems: 1 + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie_clk, pcie_wake, pcie_pereset] + maxItems: 3 + + '^.*conf.*$': + type: object + additionalProperties: false + description: pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [GPIO_WPS, GPIO_RESET, SYS_WATCHDOG, PCIE_PERESET_N, + JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N, + WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK, + WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI, + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, + SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, + SPI2_HOLD, SPI2_WP, UART0_RXD, UART0_TXD, PCIE_CLK_REQ, + PCIE_WAKE_N, SMI_MDC, SMI_MDIO, GBE_INT, GBE_RESET, + WF_DIG_RESETB, WF_CBA_RESETB, WF_XO_REQ, WF_TOP_CLK, + WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, WF_HB4, WF_HB0, + WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, WF_HB9, WF_HB10] + maxItems: 57 + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: > + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: > + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pio: pinctrl@11d00000 { + compatible = "mediatek,mt7981-pinctrl"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11c10000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11e00000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rm", + "iocfg_rb", "iocfg_lb", "iocfg_bl", + "iocfg_tm", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 56>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + mdio_pins: mdio-pins { + mux { + function = "eth"; + groups = "smi_mdc_mdio"; + }; + }; + + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index 0d2484056a0f..c30cd0d010dd 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -67,11 +67,11 @@ required: - gpio-ranges patternProperties: - '-[0-9]+$': + '-pins(-[a-z]+)?$': type: object additionalProperties: false patternProperties: - 'pins': + '^pins': type: object additionalProperties: false description: | @@ -210,7 +210,7 @@ examples: interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; - i2c0_pins_a: i2c-0 { + i2c0_pins_a: i2c0-pins { pins1 { pinmux = <PINMUX_GPIO48__FUNC_SCL5>, <PINMUX_GPIO49__FUNC_SDA5>; @@ -219,7 +219,7 @@ examples: }; }; - i2c1_pins_a: i2c-1 { + i2c1_pins_a: i2c1-pins { pins { pinmux = <PINMUX_GPIO50__FUNC_SCL3>, <PINMUX_GPIO51__FUNC_SDA3>; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml new file mode 100644 index 000000000000..4b96884a1afc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8365 Pin Controller + +maintainers: + - Zhiyong Tao <zhiyong.tao@mediatek.com> + - Bernhard Rosenkränzer <bero@baylibre.com> + +description: | + The MediaTek's MT8365 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8365-pinctrl + + reg: + maxItems: 1 + + mediatek,pctl-regmap: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + minItems: 1 + maxItems: 2 + description: | + Should be phandles of the syscfg node. + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +patternProperties: + "-pins$": + type: object + additionalProperties: false + patternProperties: + "pins$": + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in <soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: + description: | + Besides generic pinconfig options, it can be used as the pull up + settings for 2 pull resistors, R0 and R1. User can configure those + special pins. + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,tdsel: + description: | + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: | + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pinmux + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +allOf: + - $ref: pinctrl.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt8365-pinfunc.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8365-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + + pio-pins { + pins { + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + bias-pull-up; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml new file mode 100644 index 000000000000..300747252a7b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5332 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq5332-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 27 + + gpio-line-names: + maxItems: 53 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5332-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5332-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5332-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec, + audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0, + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1, + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1, + blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0, + cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out, + gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1, + mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, + pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0, + rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd, + wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 93f231c7a3b4..28f1b6a07b70 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -19,7 +19,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index 5687acaf19bf..3137db927fc0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index a0a12171b6d0..96b598bf9a76 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml index a4f6e4c588f4..c7c94d742ed2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true '#interrupt-cells': true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 3b79f5be860b..6cb667fa8665 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -20,7 +20,9 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -54,7 +56,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-6])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -66,8 +68,8 @@ $defs: enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3, - wlan ] + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, + gp0_clk, gp1_clk, sdc3, wlan ] bias-pull-down: true bias-pull-up: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index ad0cad4694c0..348d84c3cd21 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index cc6d0c9c5100..85082adc1811 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -61,7 +63,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-7])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] @@ -125,7 +127,7 @@ examples: interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 117>; + gpio-ranges = <&tlmm 0 0 113>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 5495f58905af..633c9e5ed49e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index c9a4a79e8d01..ce219827ccc8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -19,7 +19,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -51,7 +53,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 33d07d531273..cf386f644ccb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index 9287cbbff711..afe4a80f0b79 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index 858f45710fe2..5dfcc3eadbb0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index 55d5439c6c24..0c4936fc35ef 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -32,10 +34,10 @@ properties: gpio-reserved-ranges: minItems: 1 - maxItems: 75 + maxItems: 73 gpio-line-names: - maxItems: 150 + maxItems: 146 patternProperties: "-state$": @@ -61,7 +63,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ] minItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index 8e1cd4ba1116..047b4584e3c0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index 21ba32cc204a..c07ee9868046 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -20,7 +20,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 29dd503f9522..db505fdeac86 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -40,6 +40,10 @@ properties: - qcom,pm8350b-gpio - qcom,pm8350c-gpio - qcom,pm8450-gpio + - qcom,pm8550-gpio + - qcom,pm8550b-gpio + - qcom,pm8550ve-gpio + - qcom,pm8550vs-gpio - qcom,pm8916-gpio - qcom,pm8917-gpio - qcom,pm8921-gpio @@ -52,10 +56,12 @@ properties: - qcom,pmi8994-gpio - qcom,pmi8998-gpio - qcom,pmk8350-gpio + - qcom,pmk8550-gpio - qcom,pmm8155au-gpio - qcom,pmp8074-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio + - qcom,pmr735d-gpio - qcom,pms405-gpio - qcom,pmx55-gpio - qcom,pmx65-gpio @@ -111,6 +117,7 @@ allOf: enum: - qcom,pm8008-gpio - qcom,pmi8950-gpio + - qcom,pmr735d-gpio then: properties: gpio-line-names: @@ -146,6 +153,8 @@ allOf: enum: - qcom,pm8018-gpio - qcom,pm8019-gpio + - qcom,pm8550vs-gpio + - qcom,pmk8550-gpio then: properties: gpio-line-names: @@ -162,6 +171,7 @@ allOf: enum: - qcom,pm8226-gpio - qcom,pm8350b-gpio + - qcom,pm8550ve-gpio - qcom,pm8950-gpio then: properties: @@ -236,6 +246,8 @@ allOf: - qcom,pm8038-gpio - qcom,pm8150b-gpio - qcom,pm8150l-gpio + - qcom,pm8550-gpio + - qcom,pm8550b-gpio - qcom,pmc8180c-gpio - qcom,pmp8074-gpio - qcom,pms405-gpio @@ -411,6 +423,10 @@ $defs: - gpio1-gpio8 for pm8350b - gpio1-gpio9 for pm8350c - gpio1-gpio4 for pm8450 + - gpio1-gpio12 for pm8550 + - gpio1-gpio12 for pm8550b + - gpio1-gpio8 for pm8550ve + - gpio1-gpio6 for pm8550vs - gpio1-gpio38 for pm8917 - gpio1-gpio44 for pm8921 - gpio1-gpio36 for pm8941 @@ -421,10 +437,12 @@ $defs: - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio4 for pmk8350 + - gpio1-gpio6 for pmk8550 - gpio1-gpio10 for pmm8155au - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b + - gpio1-gpio2 for pmr735d - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 72cce38bc1ce..9412b9362328 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -74,7 +74,7 @@ patternProperties: oneOf: - $ref: "#/$defs/qcom-pmic-mpp-state" - patternProperties: - "mpp": + '-pins$': $ref: "#/$defs/qcom-pmic-mpp-state" additionalProperties: false @@ -179,7 +179,7 @@ examples: }; default-state { - gpio-mpp { + gpio-pins { pins = "mpp1", "mpp2", "mpp3", "mpp4"; function = "digital"; input-enable; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index adf64bfaa4ed..6271fd15e0b6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -19,7 +19,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index 29d50c4a0034..20bc967a17b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -26,7 +26,9 @@ properties: - const: north - const: east - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml new file mode 100644 index 000000000000..7e5fb9a6e7d3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block + +maintainers: + - Melody Olvera <quic_molvera@quicinc.com> + +description: | + Top Level Mode Multiplexer pin controller found in the QDU1000 and + QRU1000 SoCs. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,qdu1000-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 76 + + gpio-line-names: + maxItems: 151 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qdu1000-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qdu1000-tlmm-state" + additionalProperties: false + +$defs: + qcom-qdu1000-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|150)$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ atest_char, atest_usb, char_exec, CMO_PRI, cmu_rng, + dbg_out_clk, ddr_bist, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, + ddr_pxi5, ddr_pxi6, ddr_pxi7, eth012_int_n, eth345_int_n, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_pps_in, hardsync_pps_in, + intr_c, jitter_bist_ref, pcie_clkreqn, phase_flag, pll_bist, + pll_clk, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, + qlink3_enable, qlink3_request, qlink3_wmss, qlink4_enable, + qlink4_request, qlink4_wmss, qlink5_enable, qlink5_request, + qlink5_wmss, qlink6_enable, qlink6_request, qlink6_wmss, + qlink7_enable, qlink7_request, qlink7_wmss, qspi_clk, qspi_cs, + qspi0, qspi1, qspi2, qspi3, qup00, qup01, qup02, qup03, qup04, + qup05, qup06, qup07, qup08, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup20, qup21, qup22, SI5518_INT, smb_alert, + smb_clk, smb_dat, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tgu_ch4, tgu_ch5, tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tod_pps_in, tsense_pwm1, tsense_pwm2, + usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1, + vsense_trigger ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@f000000 { + compatible = "qcom,qdu1000-tlmm"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc>; + + uart0-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup00"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml new file mode 100644 index 000000000000..70d9106ad83d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SA8775P TLMM block + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sa8775p-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 74 + + gpio-line-names: + maxItems: 148 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sa8775p-tlmm-state" + additionalProperties: false + +$defs: + qcom-sa8775p-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, + emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0, + emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, + emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, + gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, + jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3, + mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, + mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, + mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync, + mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, + mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1, + pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3, + qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0, + sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 148>; + + qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index b40f6dc6adae..f33792a1af6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -26,7 +26,9 @@ properties: - const: north - const: south - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index f7ec8a4f664f..e51feb4c0700 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -59,7 +59,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" + - pattern: "^gpio([0-9]|1[0-4])$" minItems: 1 maxItems: 15 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index 24191d5f64ac..0ace55c9868e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -28,7 +28,9 @@ properties: - const: east - const: south - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true '#interrupt-cells': true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml index 7d2589387e1a..200b3b6ccd87 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -65,7 +65,7 @@ $defs: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-1]|1[0-8])$" + pattern: "^gpio([0-9]|1[0-8])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -94,14 +94,12 @@ $defs: 2: Lower Slew rate (slower edges) 3: Reserved (No adjustments) + bias-bus-hold: true bias-pull-down: true - bias-pull-up: true - bias-disable: true - + input-enable: true output-high: true - output-low: true required: @@ -136,7 +134,7 @@ examples: clock-names = "core", "audio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&lpi_tlmm 0 0 18>; + gpio-ranges = <&lpi_tlmm 0 0 19>; dmic01-state { dmic01-clk-pins { diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index 4efde29c36a2..97b27d6835e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index bd4fd8404aa4..ea6bd0b44f56 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -31,7 +31,9 @@ properties: - const: center - const: north - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml index 7585117c0f06..f586b3aa138e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index c9627777ceb3..23d7c030fec0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -23,7 +23,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -48,6 +50,10 @@ patternProperties: $ref: "#/$defs/qcom-sdm845-tlmm-state" additionalProperties: false + "-hog(-[0-9]+)?$": + required: + - gpio-hog + $defs: qcom-sdm845-tlmm-state: type: object @@ -117,6 +123,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> pinctrl@3400000 { @@ -130,6 +137,12 @@ examples: gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + cci0-default-state { pins = "gpio17", "gpio18"; function = "cci_i2c"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index a76117e41d93..a40175258495 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -20,7 +20,9 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -53,7 +55,7 @@ $defs: List of gpio pins affected by the properties specified in this subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 2f53905260e6..89c5562583d1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -19,7 +19,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index 164f24db8b2b..29325483cd2b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -26,7 +26,9 @@ properties: - const: south - const: east - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index e1dd54a160d5..c9bc4893e8e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -27,7 +27,9 @@ properties: - const: south - const: east - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index 41e3e0afc9a8..d95935fcc8b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -22,11 +22,21 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + minItems: 9 + maxItems: 9 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true - gpio-reserved-ranges: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 78 + + gpio-line-names: + maxItems: 156 + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -61,7 +71,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -118,7 +128,16 @@ examples: pinctrl@f100000 { compatible = "qcom,sm6350-tlmm"; reg = <0x0f100000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index d54ebb2bd5a8..66cef48ed59b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -61,7 +63,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$" - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 @@ -132,7 +134,7 @@ examples: #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 157>; + gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */ gpio-wo-subnode-state { pins = "gpio1"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index 85adddbdee56..4376a9bd4d70 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -27,7 +27,9 @@ properties: - const: north - const: south - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index bd45faa3f078..de9d8854c690 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -64,7 +64,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" + - pattern: "^gpio([0-9]|1[0-3])$" minItems: 1 maxItems: 14 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index c80f3847ac08..cf561dff8893 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -25,7 +25,9 @@ properties: - const: south - const: north - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -129,6 +131,6 @@ examples: #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; + gpio-ranges = <&tlmm 0 0 181>; /* GPIOs + ufs_reset */ wakeup-parent = <&pdc>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 0b1e4aa5819e..797242f68b1c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -22,11 +22,20 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true - gpio-reserved-ranges: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 102 + + gpio-line-names: + maxItems: 203 + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -61,7 +70,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -100,6 +109,7 @@ $defs: bias-pull-down: true bias-pull-up: true drive-strength: true + input-disable: true input-enable: true output-high: true output-low: true @@ -120,7 +130,7 @@ examples: #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 203>; + gpio-ranges = <&tlmm 0 0 204>; /* GPIOs + ufs_reset */ gpio-wo-subnode-state { pins = "gpio1"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 01a0a4a40ba5..8bf51df0b231 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -65,7 +65,7 @@ $defs: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-9]|[1-2][0-9])$" + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -96,14 +96,12 @@ $defs: 2: Lower Slew rate (slower edges) 3: Reserved (No adjustments) + bias-bus-hold: true bias-pull-down: true - bias-pull-up: true - bias-disable: true - + input-enable: true output-high: true - output-low: true required: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 4a1d10d6c5e7..56c8046f1be0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -22,7 +22,9 @@ properties: reg: maxItems: 1 - interrupts: true + interrupts: + maxItems: 1 + interrupt-controller: true "#interrupt-cells": true gpio-controller: true @@ -32,7 +34,7 @@ properties: maxItems: 105 gpio-line-names: - maxItems: 209 + maxItems: 210 "#gpio-cells": true gpio-ranges: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..5e90051ed314 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC. + +properties: + compatible: + const: qcom,sm8550-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI pins SLEW registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8550-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8550-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8550-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>, + <0x0725a000 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml new file mode 100644 index 000000000000..a457425ba112 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8550 TLMM block + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8550-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8550-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8550-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8550-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_usb, + audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk, + cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl, + cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx, + coex_uart1_tx, coex_uart2_rx, coex_uart2_tx, + cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, + i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8, + i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, + i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, + ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, + pcie0_clk_req_n, pcie1_clk_req_n, phase_flag, + pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, + qlink0_enable, qlink0_request, qlink0_wmss, + qlink1_enable, qlink1_request, qlink1_wmss, + qlink2_enable, qlink2_request, qlink2_wmss, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, + qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup1_se7, qup2_se0, + qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira, + qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb, + qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1, + qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6, + qup2_se7, sd_write_protect, sdc40, sdc41, sdc42, + sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, + uim0_clk, uim0_data, uim0_present, uim0_reset, + uim1_clk, uim1_data, uim1_present, uim1_reset, + usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8550-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index e1354f0c64f8..cb5ba1bd6f8d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -16,8 +16,9 @@ description: properties: interrupts: description: - Specifies the TLMM summary IRQ - maxItems: 1 + TLMM summary IRQ and dirconn interrupts. + minItems: 1 + maxItems: 9 interrupt-controller: true diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 6f17f3991640..1e63ea34146a 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -29,47 +29,609 @@ patternProperties: $ref: pinmux-node.yaml# properties: - groups: - description: The pin group to select. - enum: [ - # common - i2c, spi, wdt, - - # For MT7620 SoC - ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk, - uartf, uartlite, wled, - - # For MT7628 and MT7688 SoCs - gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, - p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, - pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2, - wled_an, wled_kn, - ] - function: - description: The mux function to select. - enum: [ - # common - gpio, i2c, refclk, spi, - - # For MT7620 SoC - ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa, - pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, - rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk, - wdt rst, wled, - - # For MT7628 and MT7688 SoCs - antenna, debug, i2s, jtag, p0led_an, p0led_kn, - p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, - p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, - rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1, - spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, - ] + description: + A string containing the name of the function to mux to the group. + anyOf: + - description: For MT7620 SoC + enum: [ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, + rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + wdt rst, wled] + + - description: For MT7628 and MT7688 SoCs + enum: [antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, + p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, + refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 required: - groups - function + allOf: + - if: + properties: + function: + const: antenna + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: debug + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: ephy + then: + properties: + groups: + enum: [ephy] + + - if: + properties: + function: + const: gpio + then: + properties: + groups: + anyOf: + - description: For MT7620 SoC + enum: [ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, + spi, spi refclk, uartf, uartlite, wdt, wled] + + - description: For MT7628 and MT7688 SoCs + enum: [gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, + p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, + p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, + sdmode, spi, spi cs1, spis, uart0, uart1, uart2, + wdt, wled_an, wled_kn] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, + sdmode] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: nand + then: + properties: + groups: + enum: [nd_sd] + + - if: + properties: + function: + const: p0led_an + then: + properties: + groups: + enum: [p0led_an] + + - if: + properties: + function: + const: p0led_kn + then: + properties: + groups: + enum: [p0led_kn] + + - if: + properties: + function: + const: p1led_an + then: + properties: + groups: + enum: [p1led_an] + + - if: + properties: + function: + const: p1led_kn + then: + properties: + groups: + enum: [p1led_kn] + + - if: + properties: + function: + const: p2led_an + then: + properties: + groups: + enum: [p2led_an] + + - if: + properties: + function: + const: p2led_kn + then: + properties: + groups: + enum: [p2led_kn] + + - if: + properties: + function: + const: p3led_an + then: + properties: + groups: + enum: [p3led_an] + + - if: + properties: + function: + const: p3led_kn + then: + properties: + groups: + enum: [p3led_kn] + + - if: + properties: + function: + const: p4led_an + then: + properties: + groups: + enum: [p4led_an] + + - if: + properties: + function: + const: p4led_kn + then: + properties: + groups: + enum: [p4led_kn] + + - if: + properties: + function: + const: pa + then: + properties: + groups: + enum: [pa] + + - if: + properties: + function: + const: pcie + then: + properties: + groups: + enum: [gpio] + + - if: + properties: + function: + const: pcie refclk + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcie rst + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: perst + then: + properties: + groups: + enum: [perst] + + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [uart1, uart2] + + - if: + properties: + function: + const: pwm0 + then: + properties: + groups: + enum: [pwm0] + + - if: + properties: + function: + const: pwm1 + then: + properties: + groups: + enum: [pwm1] + + - if: + properties: + function: + const: pwm_uart2 + then: + properties: + groups: + enum: [spis] + + - if: + properties: + function: + const: refclk + then: + properties: + groups: + anyOf: + - description: For MT7620 SoC + enum: [mdio] + + - description: For MT7628 and MT7688 SoCs + enum: [gpio, refclk, spi cs1] + + - if: + properties: + function: + const: rgmii1 + then: + properties: + groups: + enum: [rgmii1] + + - if: + properties: + function: + const: rgmii2 + then: + properties: + groups: + enum: [rgmii2] + + - if: + properties: + function: + const: rsvd + then: + properties: + groups: + enum: [p0led_an, p0led_kn, wled_an, wled_kn] + + - if: + properties: + function: + const: sd + then: + properties: + groups: + enum: [nd_sd] + + - if: + properties: + function: + const: sdxc + then: + properties: + groups: + enum: [sdmode] + + - if: + properties: + function: + const: sdxc d5 d4 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: sdxc d6 + then: + properties: + groups: + enum: [pwm1] + + - if: + properties: + function: + const: sdxc d7 + then: + properties: + groups: + enum: [pwm0] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi cs1 + then: + properties: + groups: + enum: [spi cs1] + + - if: + properties: + function: + const: spi refclk + then: + properties: + groups: + enum: [spi refclk] + + - if: + properties: + function: + const: spis + then: + properties: + groups: + enum: [spis] + + - if: + properties: + function: + const: sw_r + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart0 + then: + properties: + groups: + enum: [uart0] + + - if: + properties: + function: + const: uart1 + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: utif + then: + properties: + groups: + enum: [p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, + p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis] + + - if: + properties: + function: + const: wdt + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wdt refclk + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wdt rst + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wled + then: + properties: + groups: + enum: [wled] + + - if: + properties: + function: + const: wled_an + then: + properties: + groups: + enum: [wled_an] + + - if: + properties: + function: + const: wled_kn + then: + properties: + groups: + enum: [wled_kn] + + - if: + properties: + function: + const: "-" + then: + properties: + groups: + enum: [i2c, spi cs1, uart0] + additionalProperties: false additionalProperties: false @@ -83,7 +645,6 @@ required: additionalProperties: false examples: - # Pinmux controller node - | pinctrl { compatible = "ralink,mt7620-pinctrl"; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml index 61e5c847e8c8..1b1d37b981d9 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml @@ -29,21 +29,213 @@ patternProperties: $ref: pinmux-node.yaml# properties: - groups: - description: The pin group to select. - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, - uart2, uart3, wdt] - function: - description: The mux function to select. + description: + A string containing the name of the function to mux to the group. enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi, uart1, uart2, uart3, wdt refclk, wdt rst] + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + required: - groups - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, + uart1, uart2, uart3, wdt] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: nand1 + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: nand2 + then: + properties: + groups: + enum: [sdhci] + + - if: + properties: + function: + const: pcie refclk + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcie rst + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: rgmii1 + then: + properties: + groups: + enum: [rgmii1] + + - if: + properties: + function: + const: rgmii2 + then: + properties: + groups: + enum: [rgmii2] + + - if: + properties: + function: + const: sdhci + then: + properties: + groups: + enum: [sdhci] + + - if: + properties: + function: + const: spdif2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: spdif3 + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uart1 + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: uart3 + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: wdt refclk + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wdt rst + then: + properties: + groups: + enum: [wdt] + additionalProperties: false additionalProperties: false @@ -57,7 +249,6 @@ required: additionalProperties: false examples: - # Pinmux controller node - | pinctrl { compatible = "ralink,mt7621-pinctrl"; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml index 56e5becabcfd..7fd0df880a76 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -29,18 +29,93 @@ patternProperties: $ref: pinmux-node.yaml# properties: - groups: - description: The pin group to select. - enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci] - function: - description: The mux function to select. + description: + A string containing the name of the function to mux to the group. enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci] + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + required: - groups - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: sdram + then: + properties: + groups: + enum: [sdram] + + - if: + properties: + function: + const: pci + then: + properties: + groups: + enum: [pci] + additionalProperties: false additionalProperties: false @@ -54,7 +129,6 @@ required: additionalProperties: false examples: - # Pinmux controller node - | pinctrl { compatible = "ralink,rt2880-pinctrl"; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index f602a5d6e13a..4d66ca752a30 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -30,38 +30,225 @@ patternProperties: $ref: pinmux-node.yaml# properties: - groups: - description: The pin group to select. - enum: [ - # common - i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite, - - # For RT3050, RT3052 and RT3350 SoCs - sdram, - - # For RT3352 SoC - lna, pa - ] - function: - description: The mux function to select. - enum: [ - # common - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio, - pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, - uartlite, wdg_cs1, + description: + A string containing the name of the function to mux to the group. + anyOf: + - description: For RT3050, RT3052 and RT3350 SoCs + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, + uartlite] - # For RT3050, RT3052 and RT3350 SoCs - sdram, + - description: For RT3352 SoC + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, + lna, mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, + spi_cs1, uartf, uartlite, wdg_cs1] - # For RT3352 SoC - lna, pa - ] + - description: For RT5350 SoC + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, + pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf, + uartlite, wdg_cs1] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 required: - groups - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + anyOf: + - description: For RT3050, RT3052 and RT3350 SoCs + enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, + uartlite] + + - description: For RT3352 SoC + enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, + uartf, uartlite] + + - description: For RT5350 SoC + enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [led] + + - if: + properties: + function: + const: lna + then: + properties: + groups: + enum: [lna] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: pa + then: + properties: + groups: + enum: [pa] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: rgmii + then: + properties: + groups: + enum: [rgmii] + + - if: + properties: + function: + const: sdram + then: + properties: + groups: + enum: [sdram] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi_cs1 + then: + properties: + groups: + enum: [spi_cs1] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: wdg_cs1 + then: + properties: + groups: + enum: [spi_cs1] + additionalProperties: false additionalProperties: false @@ -75,7 +262,6 @@ required: additionalProperties: false examples: - # Pinmux controller node - | pinctrl { compatible = "ralink,rt305x-pinctrl"; diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml index feb6e66dcb61..008d93181aea 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -29,21 +29,213 @@ patternProperties: $ref: pinmux-node.yaml# properties: - groups: - description: The pin group to select. - enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, - uartlite] - function: - description: The mux function to select. + description: + A string containing the name of the function to mux to the group. enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2, pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite] + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + required: - groups - function + allOf: + - if: + properties: + function: + const: ge1 + then: + properties: + groups: + enum: [ge1] + + - if: + properties: + function: + const: ge2 + then: + properties: + groups: + enum: [ge2] + + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, + uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: lna a + then: + properties: + groups: + enum: [lna a] + + - if: + properties: + function: + const: lna g + then: + properties: + groups: + enum: [lna g] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: pci-dev + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-fnc + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-host1 + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-host2 + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + additionalProperties: false additionalProperties: false @@ -57,7 +249,6 @@ required: additionalProperties: false examples: - # Pinmux controller node - | pinctrl { compatible = "ralink,rt3883-pinctrl"; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml new file mode 100644 index 000000000000..ab2d456c93e4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-poeg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Port Output Enable for GPT (POEG) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The output pins(GTIOCxA and GTIOCxB) of the general PWM timer (GPT) can be + disabled by using the port output enabling function for the GPT (POEG). + Specifically, either of the following ways can be used. + * Input level detection of the GTETRGA to GTETRGD pins. + * Output-disable request from the GPT. + * SSF bit setting(ie, by setting POEGGn.SSF to 1) + + The state of the GTIOCxA and the GTIOCxB pins when the output is disabled, + are controlled by the GPT module. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-poeg # RZ/G2{L,LC} + - renesas,r9a07g054-poeg # RZ/V2L + - const: renesas,rzg2l-poeg + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,gpt: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to gpt instance that serves the pwm operation. + + renesas,poeg-id: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + POEG group index. Valid values are: + <0> : POEG group A + <1> : POEG group B + <2> : POEG group C + <3> : POEG group D + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - renesas,poeg-id + - renesas,gpt + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + poeggd: poeg@10049400 { + compatible = "renesas,r9a07g044-poeg", "renesas,rzg2l-poeg"; + reg = <0x10049400 0x400>; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_POEG_D_CLKP>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_POEG_D_RST>; + renesas,poeg-id = <3>; + renesas,gpt = <&gpt>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index d6539723f354..45b767986a87 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -76,15 +76,13 @@ allOf: required: - compatible - rockchip,grf - - "#address-cells" - - "#size-cells" - - ranges patternProperties: "gpio@[0-9a-f]+$": type: object $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#" + deprecated: true unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml new file mode 100644 index 000000000000..b470901f5f56 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 AON Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_RGPIO0 to PAD_RGPIO3 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals such as PWM have their I/O go through the 4 "GPIOs". + +maintainers: + - Jianlong Huang <jianlong.huang@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-aon-pinctrl + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + additionalProperties: false + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX macro. + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pinctrl@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x17020000 0x10000>; + resets = <&aoncrg 2>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + pwm-0 { + pwm-pins { + pinmux = <0xff030802>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml new file mode 100644 index 000000000000..222b9e240f8a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SYS Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals have their I/O go through the 64 "GPIOs". This also + includes a number of other UARTs, I2Cs, SPIs, PWMs etc. + All these peripherals are connected to all 64 GPIOs such that + any GPIO can be set up to be controlled by any of the peripherals. + +maintainers: + - Jianlong Huang <jianlong.huang@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-sys-pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + additionalProperties: false + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX or PINMUX + macros. + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x13040000 0x10000>; + clocks = <&syscrg 112>; + resets = <&syscrg 2>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + uart0-0 { + tx-pins { + pinmux = <0xff140005>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <0x0E000406>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + }; + +... |