summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-22 04:06:27 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-22 04:06:27 +0300
commitc1fecabecc352e40f99e6c5d7a74b8fcdfb38ae1 (patch)
tree9ba08f67988d1f45602ea0276555564ebce02b28 /Documentation/devicetree
parent99cc7ad46b62ef20b0478147677bebd1157bd9cf (diff)
parent5198a48381455969aa1053a0ca2e4ce409be2fc2 (diff)
downloadlinux-c1fecabecc352e40f99e6c5d7a74b8fcdfb38ae1.tar.xz
Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel: - Improve support for TI bq20z75 in sbs-battery - Add Qualcomm PM8xxx reboot driver - Add cros-ec USBPD charger driver - Move ds2760 battery driver from w1 to power-supply and add DT support - Misc fixes * tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: bq27xxx: Update comments power: supply: max77693_charger: fix unintentional fall-through power: supply: mark expected switch fall-throughs power: supply: lego_ev3_battery: fix Vce offset power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value power: supply: ds2760_battery: add devicetree probing power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion w1: core: match sub-nodes of bus masters in devicetree dt-bindings: w1: document bindings for ds2760 battery monitor dt-bindings: w1: document generic onewire bindings power: supply: adp5061: Fix a couple off by ones dt-bindings: power: reset: qcom: Add resin binding adp5061: New driver for ADP5061 I2C battery charger power: generic-adc-battery: check for duplicate properties copied from iio channels power: generic-adc-battery: fix out-of-bounds write when copying channel properties power: supply: axp288_charger: Fix initial constant_charge_current value power: supply: ab8500: stop using getnstimeofday64() power: gemini-poweroff: Avoid more spurious poweroffs power: vexpress: fix corruption in notifier registration power: remove possible deadlock when unregistering power_supply ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/power/reset/qcom,pon.txt45
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt26
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt12
-rw-r--r--Documentation/devicetree/bindings/w1/w1-gpio.txt9
-rw-r--r--Documentation/devicetree/bindings/w1/w1.txt25
5 files changed, 111 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
new file mode 100644
index 000000000000..651491bb63b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -0,0 +1,45 @@
+Qualcomm PON Device
+
+The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+and resin along with the Android reboot-mode.
+
+This DT node has pwrkey and resin as sub nodes.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional subnode:
+-pwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8941-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
new file mode 100644
index 000000000000..55967a0bee11
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt
@@ -0,0 +1,26 @@
+Devicetree bindings for Maxim DS2760
+====================================
+
+The ds2760 is a w1 slave device and must hence have its sub-node in DT
+under a w1 bus master node.
+
+The device exposes a power supply, so the details described in
+Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
+
+Required properties:
+- compatible: must be "maxim,ds2760"
+
+Optional properties:
+- power-supplies: Refers to one or more power supplies connected to
+ this battery.
+- maxim,pmod-enabled: This boolean property enables the DS2760 to enter
+ sleep mode when the DQ line goes low for greater
+ than 2 seconds and leave sleep Mode when the DQ
+ line goes high.
+- maxim,cache-time-ms: Time im milliseconds to cache the data for. When
+ this time expires, the values are read again from
+ the hardware. Defaults to 1000.
+- rated-capacity-microamp-hours:
+ The rated capacity of the battery, in mAh.
+ If not specified, the value stored in the
+ non-volatile chip memory is used.
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
index c40e8926facf..4e78e51018eb 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
@@ -2,7 +2,11 @@ SBS sbs-battery
~~~~~~~~~~
Required properties :
- - compatible : "sbs,sbs-battery"
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
+ part number compatible string might be used in order to take care of
+ vendor specific registers.
+ Known <vendor>,<part-number>:
+ ti,bq20z75
Optional properties :
- sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
@@ -14,9 +18,9 @@ Optional properties :
Example:
- bq20z75@b {
- compatible = "sbs,sbs-battery";
- reg = < 0xb >;
+ battery@b {
+ compatible = "ti,bq20z75", "sbs,sbs-battery";
+ reg = <0xb>;
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <10>;
sbs,battery-detect-gpios = <&gpio-controller 122 1>;
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt
index 37091902a021..3d6554eac240 100644
--- a/Documentation/devicetree/bindings/w1/w1-gpio.txt
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt
@@ -13,10 +13,15 @@ Optional properties:
- linux,open-drain: if specified, the data pin is considered in
open-drain mode.
+Also refer to the generic w1.txt document.
+
Examples:
onewire {
compatible = "w1-gpio";
- gpios = <&gpio 126 0>, <&gpio 105 0>;
- };
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ battery {
+ // ...
+ };
+ };
diff --git a/Documentation/devicetree/bindings/w1/w1.txt b/Documentation/devicetree/bindings/w1/w1.txt
new file mode 100644
index 000000000000..05f26b27d898
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1.txt
@@ -0,0 +1,25 @@
+Generic devicetree bindings for onewire (w1) busses
+===================================================
+
+Onewire busses are described through nodes of their master bus controller.
+Slave devices are listed as sub-nodes of such master devices. For now, only
+one slave is allowed per bus master.
+
+
+Example:
+
+ charger: charger {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio 100 0>, <&gpio 101 0>;
+
+ battery {
+ compatible = "maxim,ds2760";
+ power-supplies = <&charger>;
+ };
+ };